首页>外文期刊>Journal for manufacturing science and production

Journal for manufacturing science and production

中文名称：制造科学与生产杂志

ISSN：2191-4184
出版周期：3 times a year

发文量：100

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Application of Taguchi Method for Optimization of Parameters in Turning Operation

机译：TAGUCHI方法在转动操作中优化参数的应用
- 作者：B. Singaravel;T. Selvaraj
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第3期
- Turning;
- EN25 steel;
- Process parameters;
- Tool vibration;
- Taguchi method;
2.Experimental Investigation to Predict Tool Wear and Vibration Displacement in Turning - A Base for Tool Condition Monitoring

机译：试验研究预测刀具磨损和振动位移在转动时 - 一种刀具状态监测的基础
- 作者：M. Prakash Babu;Balla Srinivasa Prasad
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第2期
- Tool wear;
- Fast fourier transform;
- Vibration displacement;
- Cutting forces;
- Turning;
3.A CNC Parametric Programming Method for Manufacturing of Axisymmetric Mould Cavities

机译：一种用于制造轴对称模腔的CNC参数规划方法
- 作者：Sotiris L. Omirou
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第3期
- CAM;
- CNC machining;
- Motion generation;
- Moulds;
4.An Experimental and Numerical Study on Orthogonal Machining of Ti-6Al-4V Alloy

机译：Ti-6Al-4V合金正交加工的实验与数值研究
- 作者：Vijayan Krishnaraj
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第4期
- Orthogonal machining;
- Numerical simulation;
- Rake angle;
- Cutting force;
- Ti-6Al-4V alloy;
5.Fracture and Mechanical Characteristics Degradation of Glass Fiber Reinforced Petroleum epoxy Pipes

机译：玻璃纤维增强石油环氧管的裂缝和力学特性降解
- 作者：Mohammed Y. Abdellah;Mohamed K. Hassan;Mohammad S. Alsoufi
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第1期
- GRP;
- Compact tension;
- Flexural strength;
- Single edge notch;
- Composite sandwich;
6.Investigation on Effect of Machining Parameters of End Milling on Surface Finish and Temperature Using Taguchi Technique

机译：用TAGUCHI技术研究结束铣削加工参数对表面光洁度和温度的影响
- 作者：Tamiloli N.;Venkatesan J.
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第4期
- Surface roughness;
- Temperature;
- Taguchi method;
- Quality and optimization;
7.Thermodynamic Assessment of TiO_2 Reduction to Ti Metal in Molten CaCl_2

机译：熔化CaCl_2中TiO_2减少TiO_2的热力学评估
- 作者：Mallikharjuna R. Bogala;Ramana G. Reddy
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第1期
- Titanium dioxide;
- Reduction;
- Molten calcium chloride;
- Thermodynamic modelling;
- Isothermal phase diagrams;
8.Multi-Objective Optimization of HAZ Characteristics for Submerged Arc Welding of Micro-Alloyed High Strength Pipeline Steel using GRA-PCA Approach

机译：用GRA-PCA方法对微合金高强度管线钢浸没电弧焊接HAZ特性的多目标优化
- 作者：Satish Kumar Sharma;Sachin Maheshwari
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第4期
- Multi-objective optimization;
- HAZ;
- SAW;
- GRA;
- PCA;
- High strength pipeline steel;
9.Design and Analysis of Higher Order Exponential Horn Profiles for Ultrasonic Machining

机译：超声波加工高阶指数喇叭轮廓的设计与分析
- 作者：Akash Deep Chhabra;R. Vinod Kumar;Pandu R. Vundavilli;B. Surekha
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第1期
- Ultrasonic machining;
- Acoustic horn;
- Mixed profile horn and finite element method;
10.Slag Formation - Thermodynamic Aspects and Experimental Observations

机译：渣形成 - 热力学方面和实验观察
- 作者：Lauri Holappa;Yilmaz Kacar
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第4期
- Slag formation;
- Fluxes;
- Thermodynamics;
- Kinetics;
- Mechanisms;
- BOF;
- LF;
11.Microstructural and Corrosion Properties of Atmospheric Plasma Sprayed Alumina Coatings on AZ31B Magnesium Alloy Under Sodium Chloride Environment

机译：氯化钠环境下AZ31B镁合金对大气等离子体喷涂氧化铝涂层的微观结构和腐蚀性能
- 作者：D. Thirumalai kumarasamy;K. Shanmugam;V. Balasubramanian;S. Vignesh
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第2期
- Atmospheric plasma spraying (APS);
- Alumina coating;
- Response surface methodology (RSM);
- Corrosion rate (CR);
12.Optimization of Process Parameters in Micro-EDM of Ti-6Al-4V Alloy

机译：Ti-6Al-4V合金微EDM过程参数的优化
- 作者：V. Krishnaraj
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第1期
- Electrical discharge machining (EDM);
- Micro holes;
- Material removal rate;
- Tool wear rate;
- Hole taper;
13.An Integrated Approach of Fuzzy AHP and Fuzzy TOPSIS to Select Logistics Service Provider

机译：模糊AHP和模糊TOPSIS的综合方法，以选择物流服务提供商
- 作者：Ponnuboina Kishore;G. Padmanabhan
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第1期
14.Investigation of Micro-Cracks Susceptibility on Machined Pure Titanium Surface in WEDM Process

机译：WEDM工艺中加工纯钛表面微裂纹易感性研究
- 作者：Anish Kumar;Vinod Kumar;Jatinder Kumar
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第2期
- WEDM;
- Micro-cracks;
- Pure titanium;
- ANOVA;
- Material transformation;
- X-ray diffraction;
- EDX;
15.Analysis of Shrinkage Characteristics of Aluminium Silicon Alloy

机译：铝硅合金收缩特性分析
- 作者：Syed Ferhathullah Hussainy;Mohd. Viquar Mohiuddin;P. Laxminarayana;S. Sundarrajan;A. Krishnaiah
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第3期
- Aluminium alloy;
- ANOVA;
- Shrinkage;
- Casting yield;
16.Optimized Investigations over Diameter and Distance Based Factor towards Rigidity and Accuracy of Spindle in CNC Machining Centers

机译：CNC加工中心主轴对直径和距离基于距离和准确性的优化研究
- 作者：Kuldeep Verma;R. M. Belokar
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第2期
- CNC;
- Feed drive system;
- Ball screw;
- Accuracy;
- Critical speed;
17.Arrays of Rotating Permanent Magnet Dipoles for Stirring and Pumping of Liquid Metals

机译：旋转永磁偶极零块，用于搅拌和泵送液态金属
- 作者：Andris Bojarevics;Toms Beinerts;Martins Sarma;Yurii Gelfgat
- 期刊名称：《Journal for manufacturing science and production》 | 2015年第1期
- Stirrer;
- Aluminium;
- Halbach array;
- Permanent magnets;
- Pump;
18.An Integrated RSM-GA Based Approach for Multi Response Optimization of FDM Process Parameters for Pyramidal ABS Primitives

机译：基于RSM-GA基于多响应优化的基于FDM工艺参数的基于RSM-GA方法
- 作者：Manu Srivastava;Sachin Maheshwari;T. K. Kundra;Sandeep Rathee
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第3期
- Genetic algorithm;
- Response surface methodology;
- Optimization;
- Layout optimization;
- Fused deposition modelling;
19.A Slag Management Toolset for Determining Optimal Coal Gasification Temperatures

机译：一种用于确定最佳煤气化温度的渣管理工具集
- 作者：Kyei-Sing Kwong;James P. Bennett
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第4期
- Coal slag;
- Similarity;
- Slag viscosity;
- Modeling;
20.Multi-Objective Optimization of Bead Geometry for Submerged Arc Welding of Pipeline Steel Using RSM-Fuzzy Approach

机译：用RSM模糊方法将管线钢浸没弧焊珠几何的多目标优化
- 作者：Satish Kumar Sharma;Sachin Maheshwari;Sandeep Rathee
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第3期
- Multi-objective optimization;
- Submerged arc welding;
- Bead geometry;
- API X80 steel;
- Fuzzy logic;
21.Investigations on Surface Roughness Measurement in Minimum Quantity Lubrication Turning of Titanium Alloys Using Response Surface Methodology and Box-Cox Transformation

机译：响应面法和箱COX转化对钛合金最小润滑转动钛合金的表面粗糙度测量研究
- 作者：Munish Kumar Gupta;P. K. Sood;Vishal S. Sharma
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第2期
- Titanium;
- Turning;
- Minimum quantity lubrication;
- Surface roughness;
- Response surface methodology;
22.Experimental Investigation of Multiple Quality Characteristics of Laser Beam Machined Surface using Integrated Taguchi and Fuzzy Logic Method

机译：用集成的TAGUCHI和模糊逻辑方法进行激光束加工表面多重质量特性的实验研究
- 作者：Anish Kumar;Vinod Kumar;Gaurav Sharma
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第3期
- Laser beam cutting;
- Fuzzy logic;
- Multi-response optimization;
- Kerf width;
- Material removal rate (MRR);
23.A Review on Strategic Positioning of Bottleneck around the Customer Order Decoupling Point and Issues on Production Planning in Supply Chain

机译：客户订单解耦点周围瓶颈战略定位综述及供应链生产规划问题
- 作者：Muhammad Saeed;Samiya Loya;Adil Loya
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第4期
- Customer order decoupling point;
- Bottleneck management;
- Capacity planning;
- Material planning;
- Supply chain;
24.Mechanical Properties of ABS Embedded with Basalt Fiber Fillers

机译：嵌入玄武岩纤维填料ABS的力学性能
- 作者：Ayman M. M. Abdelhaleem;Mohammed Y. Abdellah;Hesham I. Fathi;Montasser Dewidar
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第2期
- Acrylonitrile-butadiene-styrene;
- Basalt fiber;
- Mechanical properties;
- Injection molding;
25.Fuzzy and Regression Modeling for Nd:YAG Laser Cutting of Ti-6Al-4V Superalloy Sheet

机译：ND的模糊和回归模型：Ti-6AL-4V超合金片的YAG激光切割
- 作者：D. Rajamani;A. Tamilarasan
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第3期
- Laser cutting;
- Box-behnken design;
- Regression model;
- Fuzzy logic;
- Kerf deviation;
- Metal removal rate;
26.Formation of Chromium-Containing Molten Salt Phase during Roasting of Chromite Ore with Sodium and Potassium Hydroxides

机译：在铬铁矿矿石氢氧化钠和氢氧化钾的焙烧过程中形成含铬的熔盐相
- 作者：Lidia Escudero-Castejon;Sergio Sanchez-Segado;Stephen Parirenyatwa;Animesh Jha
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第4期
- Chromite ore;
- Oxidative roasting;
- Molten salt phase;
- NaOH;
- KOH;
- Chromium recovery;
27.Performance Evaluation of Milling of Inconel-625 Under Minimum Quantity Lubrication

机译：最小数量润滑下Inconel-625铣削的性能评估
- 作者：Pragat Singh;Jagwant Singh;J. S. Dureja;Talwinder Singh;Manu Dogra;Manpreet S. Bhatti
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第1期
28.Experimental Investigation and Optimization of Process Parameters Used in the Silicon Powder Mixed Electro Discharge Machining of Ti-6Al-4V Alloy Using Response Surface Methodology

机译：用响应面法测定Ti-6Al-4V合金硅粉混合电放电加工工艺参数的实验研究。
- 作者：Nipun D. Gosai;Anand Y. Joshi
- 期刊名称：《Journal for manufacturing science and production》 | 2016年第1期
- EDM;
- Powder mixed electro discharge machining (PMEDM);
- Ti-6Al-4V alloy;
- Response surface methodology;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号