首页>外文期刊>Journal of Achievements in Materials and Manufacturing Engineering

Journal of Achievements in Materials and Manufacturing Engineering

中文名称：材料与制造工程成就杂志

ISSN：1734-8412
出版周期：Monthly

发文量：239

期刊论文

热门论文

年度选择

2021
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
2020
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
2019
- 第1期
- 第1期
- 第1期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
2018
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
2017
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
2016
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
2015
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
2014
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
2013
- 第1期
- 第1期
- 第1期
- 第1期
- 第1期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期
- 第2期

更多>>

全选（0）

1.Hardmetals characterization by tribological means

机译：用摩擦学方法表征硬质合金
- 作者：S.F. Scieszka;W. Grzegorzek;M. Zotnierz
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Tribotesting;
- Abrasion;
- Fracture;
- Hardmetal;
2.Precipitation evolution and surface modification of magnesium alloys

机译：镁合金的析出演化和表面改性
- 作者：T. Tanski;M. Krol;L.A. Dobrzahski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Materials science;
- Casting magnesium alloys;
- Thermal analysis;
- Heat treatment;
- CVD and PVD;
- Laser surface treatment;
- Computer materials science;
3.Input physical properties in mathematical model of steel quenching

机译：钢淬火数学模型中的输入物理性质
- 作者：B. Smoljan;D. Iljkic;L. Pomenic
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Steel quenching;
- Numerical modelling;
- Hardness;
4.Chosen aspects of project management

机译：选择项目管理方面
- 作者：A. Kania;M. Spilka;S. Griner
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Industrial management and organisation;
- Project managemen;
- Project planning;
- Project cost;
- Milestones;
5.The influence of chemical composition on structure and mechanical properties of austenitic Cr-Ni steels

机译：化学成分对奥氏体Cr-Ni钢组织和力学性能的影响
- 作者：A. Kurc-Lisiecka;M. Kciuk
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Austenitic steel;
- Chemical composition;
- Mechanical properties;
- Static tensile test;
- X-ray analysis;
6.Sintering of diamond composites with SHS-prepared bonding phases

机译：具有SHS制备的粘结相的金刚石复合材料的烧结
- 作者：P. Putyra;L. Javuorska;L. Stobierski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- SHS synthesis;
- HP-HT sintering;
- Composites;
- Microstructure-fmal;
- Diamond;
- Cutting tools;
7.Structure and corrosion properties of Mg_(70-x)Zn_(30)Ca_x[x=0.4] alloys for biomedical applications

机译：用于生物医学的Mg_（70-x）Zn_（30）Ca_x [x = 0.4]合金的结构和腐蚀性能
- 作者：R. IMowosielski;K. Cesarz;R. Babilas
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Magnesium alloys;
- Bulk metallic glasses;
- Biomaterials;
- Corrosion rate;
8.The evaluation of the TPM synchronization on the basis of their outputs

机译：根据TPM同步输出评估
- 作者：M. Dolecki;R. Kozera;K. Lenik
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Artificial Intelligence Methods;
- Neurocryptography;
- Data security;
9.Comparative investigation of friction stir welding and fusion welding of 6061-T6 and 5083-0 aluminum alloy based on mechanical properties and microstructure

机译：基于力学性能和组织的6061-T6和5083-0铝合金搅拌摩擦焊和熔焊的比较研究
- 作者：S. Jannet;P.K. Mathews;R. Raja
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- TIG;
- MIG;
- FSW;
10.Effect of high power diode laser surface alloying on wear resistance of high speed steel

机译：大功率二极管激光表面合金化对高速钢耐磨性的影响
- 作者：M. Bonek
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Heat treatment;
- Laser;
- Tool materials;
- Wear resistance;
11.Studies of selected properties of high-temperature superconducting tape 2G HTS SF series - the example: tape SF12050

机译：高温超导胶带2G HTS SF系列的选定特性研究-示例：SF12050胶带
- 作者：J. Jedryka;M. Szota;M. Nabiatek
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- High-temperature superconducting tape;
- SF 12050;
- 2GT HTS FS;
12.Influence of pulse laser irradiation on structure and mechanical properties of amorphous Fe_(73.1)Nb_3Cu_(1.0)Si_(15.5)B_(7.4) alloy

机译：脉冲激光辐照对非晶Fe_（73.1）Nb_3Cu_（1.0）Si_（15.5）B_（7.4）合金组织和力学性能的影响
- 作者：S.I. Mudry;Yu.S. Nykyruy;Yu.O. Kulyk
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Amorphous alloy;
- Surface treatment;
- X-ray phase analysis;
- Mechanical properties;
13.Electrical properties mono- and polycrystalline silicon solar cells

机译：单晶硅和多晶硅太阳能电池的电性能
- 作者：L.A. Dobrzanski;M. Szczesna;M. Szindler
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
14.About heat treatment and properties of Duplex Stainless Steels

机译：关于双相不锈钢的热处理和性能
- 作者：M. Rosso;I. Peter;D. Suani
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Heat treatments;
- Strain hardening;
- Superduplex stainless steels;
- Mechanical properties;
- Microstructures;
15.The identification of degenerated systems in the impact energy dissipation process

机译：冲击能量耗散过程中退化系统的识别
- 作者：M. Bocian;K. Jamroziak
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Computational mechanics;
- Impact load;
- Degenerated model;
- Equations energy and potency balance;
16.Microstructural and mechanical properties changes of T321H steel after long time creep service

机译：长期蠕变后T321H钢的组织和力学性能变化
- 作者：H. Paszkowska;A. Hernas;A. Zielinski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Structure;
- Mechanical properties;
- Austenitic steel T321H;
17.Effect of ultrasonic treatment of activated carbon on capacitive and pseudocapacitive energy storage in electrochemical supercapacitors

机译：超声处理活性炭对电化学超级电容器中电容性和拟电容性能量存储的影响
- 作者：I.I. Grygorchak;Z.A. Stotsko;B.P. Bakhmatyuk
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Ultrasonic treatment;
- Pseudocapacitance;
- Electric double layer;
- Nyquist plots;
- Hybrid supercapacitor;
18.Impact of residual glycerides on viscosity of biodiesel (waste and rapeseed oil blends)

机译：残留甘油酯对生物柴油（废油和菜籽油混合物）粘度的影响
- 作者：Z. Jurac;L. Pomenic
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Biodiesel production;
- Waste cooking oils;
- Crude rapeseed oil;
- Residual glycerides;
- Kinematic viscosity;
19.The effect of heat treatment on the magnetic properties of Fe_(82)Zr_7Nb_2Cu_1B_8 amorphous alloy

机译：热处理对Fe_（82）Zr_7Nb_2Cu_1B_8非晶态合金磁性能的影响
- 作者：J. Gondro
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Amorphous alloys;
- Mossbauer spectroscopy;
- Magnetic properties;
- Differential scanning calorimetry;
20.Transmission and photonic band gaps in Fibonacci superlattices

机译：斐波那契超晶格的透射和光子带隙
- 作者：J. Garus;S. Garus;K. Btoch
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Transmission;
- Multilayers;
- Superlattices;
- Aperiodic;
- LHM;
- RHM;
21.Cooling curve and microchemical phase analysis of rapidly quenched magnesium AM60B and AE44 alloys

机译：快速淬火镁AM60B和AE44合金的冷却曲线和微化学相分析
- 作者：A.J. Gesing;J.H. Sokolowski;P.C. Marchwica
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- AM60;
- AE44;
- Magnesium;
- Thermal analysis;
- Micro-chemical analysis;
22.Evaluation of selected properties of PA6-copper/graphite composite

机译：评估PA6-铜/石墨复合材料的选定性能
- 作者：J. Konieczny;B. Chmielnicki;A. Tomiczek
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Engineering polymers;
- Polyamide;
- Metallic powders;
- Mechanical properties;
- Wear resistance;
23.The wear tribometer and digitalization of tribological tests data

机译：磨损摩擦计和摩擦学测试数据的数字化
- 作者：E. Zdravecka;M. Ondac;J. Tkacova
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Modernized tribotester;
- Sensor;
- Wear;
- Tribological properties;
24.Evaluation of selected elements of human resources management in organization

机译：评估组织中人力资源管理的某些要素
- 作者：A. Kania;ML Spilka
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Human Resources Management;
- Motivating of Employees;
- Training of workers;
- Employees Remuneration;
25.The comparison of computer methods for porosity evaluation in sintered constructional steels

机译：烧结建筑用钢孔隙率评估计算机方法的比较
- 作者：L.A. Dobrzanski;M. Musztyfaga-Staszuk;A. Luckos
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Powder metallurgy;
- Sintering constructional steels;
- Computer methods of porosity analysis;
26.Defects in the structure of Fe_(60)Co_(10)W_2Me_2Y_8B_(18) amorphous metallic glasses, where Me=(Mo,Nb)

机译：Fe_（60）Co_（10）W_2Me_2Y_8B_（18）非晶态金属玻璃的结构缺陷，其中Me =（Mo，Nb）
- 作者：S. Garus;J. Garus;M. Nabiatek
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Amorphous materials;
- metallic glasses;
- Magnetic properties;
- Structure defects;
27.Computer aided design in Selective Laser Sintering (SLS) - application in medicine

机译：选择性激光烧结（SLS）中的计算机辅助设计-在医学中的应用
- 作者：L.A. Dobrzariski;A. Achtelik-Franczak;M. Krol
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- CAD/CAM;
- Additive Manufacturing;
- Selective Laser Sintering;
- Implant;
28.Investigations of temperature distribution in metallic glasses fabrication process

机译：金属玻璃制造过程中温度分布的研究
- 作者：A. Januszka;R. Nowosielski;A. Pusz
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Bulk Metallic Glasses;
- Cooling rate;
- Temperature distribution;
- Temperature measurement;
- Casting;
29.Properties of Fe_(73)Ni_5Y_3B_(19) amorphous ribbon produced by melt-spinning

机译：熔融纺丝生产的Fe_（73）Ni_5Y_3B_（19）非晶带的性能
- 作者：K. Zdrodowska;P. Kwarciak;M. Szota
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Amorphous alloys;
- Melt-spinning;
- Ribbon;
30.Fabrication of ternary Ca-Mg-Zn bulk metallic glasses

机译：Ca-Mg-Zn三元金属玻璃的制备
- 作者：R. Nowosielski;A. Borowskr;A. Guvuer
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Amorphous materials;
- Bulk metallic glasses;
- Ca-based alloys;
- Pressure die casting;
- Ternary Ca-Mg- Zn;
- Biocompatible;
- Biomedical applications;
31.Mean field homogenization in multi-scale modelling of composite materials

机译：复合材料多尺度建模中的平均场均化
- 作者：W. Ogierman;G. Kokot
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Mean field homogenization;
- Multi-scale modelling;
- DIGIMAT;
32.Structure and magnetic properties of Fe-based amorphous alloys

机译：铁基非晶合金的结构和磁性
- 作者：K. Bloch
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- The bulk alloy;
- Microstructure;
- Disaccommodation;
- Permeability;
- Core losses;
33.Designing and controlling the microstructure of 37MnNiMo6-4-3 hypoeutectoid steel after continuous cooling

机译：连续冷却后37MnNiMo6-4-3亚共析钢的组织设计与控制
- 作者：E. Rozniata
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Metallic alloys;
- Hypoeutectoid steel;
- CCT diagram;
- EDS analysis;
34.Manufacturing of injection moulding tool with five axis milling machine

机译：用五轴铣床制造注塑工具
- 作者：A. Stoic;J. Kopac;M. Duspara
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Machining;
- Five axis milling machine;
- CAD/CAM;
- Injection moulding;
35.Plastic properties of weld after micro-jet cooling

机译：微喷射冷却后的焊缝塑性
- 作者：J. Pivunik;D. Hadrys M;G. Skorulski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Micro-jet welding;
- Plastic properties;
- Acicular ferrite;
- Erichsen cupping test;
- Bending test;
36.Investigation of the Portevin-Le Chatelier effect by the acoustic emission

机译：通过声发射研究Portevin-Le Chatelier效应
- 作者：B. Grzegorczyk;W. Ozgowicz;E. Kalinowska-Ozgowicz
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Copper alloys;
- Single crystals;
- Acoustic emission (EA);
- Portevin-Le Chatelier (PLC) effect;
37.Applications of lasers in metallization of thermoplastic and thermosetting polymers

机译：激光在热塑性和热固性聚合物金属化中的应用
- 作者：P. Rytlewski;M. Zenkiewicz
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Thermoplastic composites;
- Thermosetting composites;
- Electroless metallization;
- Laser surface treatment;
38.A study of the mechanical properties of amorphous iron-based alloy produced by the injection-casting method

机译：注射铸造法生产非晶态铁基合金的力学性能研究
- 作者：M. Szota;M. Supernak;A. Bukowska
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Receipt of amorphous alloys with unique mechanical properties for electronics applications;
39.Austenitic steels for boiler elements in USC power plants

机译：USC电厂锅炉元件用奥氏体钢
- 作者：A. Zielinski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Structure;
- Creep;
- HR3C steel;
- Super 304H steel;
40.Influence analysis of admixtures on mechanical properties of non-alloy structural steels

机译：外加剂对非合金结构钢力学性能的影响分析
- 作者：R. Honysz;L.A. Dobrzanski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
41.Al_2O_3 antireflection coatings for silicon solar cells

机译：硅太阳能电池用Al_2O_3减反射膜
- 作者：L.A. Dobrzanski;M. Szindler
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
- Antireflection coatings;
- Silicon solar cells;
- Atomic layer deposition;
42.Comparison of properties of Ti-6AI-4V titanium alloys producedby two methods: by continuous casting and injection casting, in aspect of medical applications

机译：在医疗应用方面，通过连续铸造和注射铸造两种方法生产的Ti-6AI-4V钛合金的性能比较
- 作者：J. Klimas;M. Szota;M. Nabiatek
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Titanium alloy Ti-6Al-4V;
- Solid amorphous alloy;
- Injection casting;
43.Examination of the surface properties of ceramic micro and nanoparticles

机译：陶瓷微颗粒和纳米颗粒的表面性能检查
- 作者：A. Hudecki;M. Pawlyta;L.A. Dobrzariski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Nanoparticles;
- Surface area;
- BET;
- TEM;
- SEM;
44.Determining the melt flow index of polypropylene:Vistalon 404

机译：测定聚丙烯的熔体流动指数：Vistalon 404
- 作者：J. Weszka;M.M. Szindler;M. Szindler
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Thermoplastics;
- Melt mass flow rate (MFR);
- Melt volume flow rate (MVR);
45.Model-based design approach to reducing mechanical vibrations

机译：基于模型的设计方法，可减少机械振动
- 作者：P. Czop;G. Wszolek
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第1期
46.Skeleton castings dynamic load resistance

机译：骨架铸件抗动载荷
- 作者：M. Cholewa;J. Szajnar;T. Szuter
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Casting;
- Composites;
- Mechanical;
- Skeleton casting;
- Materials design;
47.Position regulation of magnetic shape memory actuator

机译：磁性形状记忆执行器的位置调节
- 作者：B. Minorowicz;A. Nowak;F. Stefariski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Smart Materials;
- Magnetic Shape Memory Alloy;
- Transducer;
- Dspace;
48.The influence of extinction coefficient on transmission in binary multilayer

机译：消光系数对二元多层膜传输的影响
- 作者：S. Garus;J. Garus;K. Szlazak
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Transmission;
- Multilayers;
- Superlattices;
- Absorption;
- LHM;
- RHM;
49.Application of powder injection moulding for manufacturing of tool composite materials

机译：粉末注射成型在工具复合材料生产中的应用
- 作者：G. Matula;A. Jedrzejewska-Aniol;J. Niespodziahski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Powder Metallurgy;
- Extrusion;
- Powder Injection Moulding;
- Feedstock;
- Tool materials;
50.Influence of selected parameters of Selective Laser Sintering process on properties of sintered materials

机译：选择性激光烧结工艺中所选参数对烧结材料性能的影响
- 作者：A. Stwora;G. Skrabalak
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2013年第2期
- Additive manufacturing;
- Process optimization;
- Selective Laser Sintering/Melting;
51.Kinetics of precipitation and recrystallisation of titanium copper

机译：钛铜沉淀和再结晶的动力学
- 作者：J. Konieczny;K. Labisz;Z. Rdzawski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Alloyed copper;
- Heat treatment;
- Cold deformation;
- Precipitation;
- Recrystallisation;
52.Fabrication of screens for electromagnetic fields shielding with threats analysis at the position

机译：在现场进行威胁分析的电磁场屏蔽屏的制造
- 作者：M. Spilka;A. Kania;S. Griner
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Materials;
- Electromagnetic fields shielding;
- Structure testing;
- Occupational risk assessment;
53.Transient Liquid Phase bonding of γTiAl using Al films and SPS method

机译：Al膜和SPS法进行γTiAl的瞬时液相键合
- 作者：K. Szastak;K. Matsuura;D. Kata
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- γTiAl;
- TLP bonding;
- Al films;
- SPS;
- Vickers hardness;
54.A comparison of laser cutting and water-jet cutting

机译：激光切割与水刀切割的比较
- 作者：S. Spadto;D. Krajcarz;P. Mlynarczyk
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Water-jet cutting;
- Laser cutting;
- Stainless steel;
- Surface roughness;
- 3D surface topography;
55.Study of the oxide layers on metals by local electrochemical analysis

机译：通过局部电化学分析研究金属上的氧化物层
- 作者：Y. Rublinetskaya;V. Slepushkin;A. Gukin
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Local electrochemical analysis;
- Oxide layers;
- Resistivity;
56.Difference between 2D and 3D capturing and influence of strain rate on FLC diagram of DC.01 steel

机译：2D和3D捕获之间的差异以及应变率对DC.01钢FLC图的影响
- 作者：L. Potuznik;P. Konopik;M. Rund
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Forming Limit Diagram;
- Optical measuring;
- ARAMIS;
- 2D vs. 3D;
57.Selected properties of plasticized PVC modified by recyclate of polylactide film

机译：聚乳酸薄膜的回收改性的增塑PVC的某些性能
- 作者：B. Chmielnicki;J. Konieczny;W. Pakiela
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Engineering polymers;
- Biodegradable material;
- Mechanical properties;
- Electron microscopy;
58.Chemical-heat treatment of materials used for fabrication of tools and effects of this treatment to durability of tools

机译：用于工具制造的材料的化学热处理及其对工具耐用性的影响
- 作者：J. Nemec;J. Fajt
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- High speed steel;
- Cutting property;
- Durability of tool;
- Nitrocarburizing;
- Fluidization;
- Fluidized bed;
- Thermo-active powder;
59.New method of nitrocarburizing of X37CrMoV5-1 hot working tool steel in chemically active fluidized bed

机译：X37CrMoV5-1热作工具钢在化学活性流化床中氮碳共渗的新方法
- 作者：A. Ciski;T. Babul;K. Lankiewicz
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Nitrocarburizing;
- Fluidized bed;
- Chemically active powder;
60.Analysis of the effect of processing vibro-abrasive finishing on the ammunition scales topography surface and sharp edges

机译：分析加工振动磨料对弹药秤形貌表面和锋利边缘的影响
- 作者：S. Spadlo;D. Bankowski;P. Mlynarczyk
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Fine machining;
- Superficial layer;
- Surface roughness;
- Vibration machining;
- Vibro-abrasive;
- Rotofinish;
- Tumbling;
61.Solid particle erosion behavior of Inconel 718 super alloys under elevated temperatures

机译：Inconel 718高温合金在高温下的固体颗粒腐蚀行为
- 作者：B. Bircan;S. Fidan;H. Cimenoglu
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Inconel 718;
- Super alloys;
- Erosion damage characterization;
- Scanning electron microscope;
62.Qualitative and numerical analysis of chemical composition of selected iron alloys technique wave dispersive spectrometry (WDS) by calibration curves

机译：通过校准曲线对所选铁合金技术波色散法（WDS）的化学成分进行定性和数值分析
- 作者：M. Pawlyta;J. Krzysteczko;B. Nieradka
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
63.Forecast the formation of nitrides on the surface of titanium alloys during nitriding in a glow discharge

机译：预测辉光放电氮化过程中钛合金表面氮化物的形成
- 作者：I.M. Pastukh;N.S. Mashovets;Yu.l. Shalapko
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Titanic alloy;
- Nitriding in glow discharge;
- Layer formation;
- Analytical criteria;
64.Background of branched crack formation in surface zone of continuously-cast Ti-Nb microalloyed steel slab

机译：连续铸造Ti-Nb微合金钢坯表面区域支化裂纹形成的背景
- 作者：P. Bekec;M. Longauerova;M. Vojtko
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Slab;
- Branched cracks;
- Oscillation marks;
- Segregation;
- Precipitation;
65.Influence of annealing on the microstructure of cast TiAl-based alloy

机译：退火对铸造TiAl基合金显微组织的影响
- 作者：J. Lapin;T. Pelachova
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- TiAl;
- Microstructure;
- Ageing;
- Lattice parameters;
66.Resistance of bsmetaliic plates on the dynamic cracking

机译：双金属板对动态裂纹的抵抗力
- 作者：D. Rydz;G. Stradomski;A. Wierzba
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Bimetals;
- Merging;
- Impact tests;
- Cracking;
67.The influence of light curing parameters on wear resistance of selected resin-based dental composites

机译：光固化参数对所选树脂基牙科复合材料耐磨性的影响
- 作者：P. Malara;Z. Czech;W. Swiderski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Dental composites;
- Light-curing;
- Silorane;
- Methacrylate;
- Wear resistance;
68.Simulation of the new technology of forging of blanks such as slabs and playes made of ferrous metals and alloys

机译：模拟黑色金属和合金制成的板坯和板坯的锻造新技术
- 作者：A. Naizabekov;S. Lezhnev;O. Krivtsova
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Computer modeling;
- Slabs and plates;
- Forging;
69.FEM -simulation of plate rolling process, analysis of inhomogeneous deformation and indexes of stress state in the deformation zone

机译：板坯轧制过程的有限元模拟，变形区域非均匀变形分析及应力状态指标
- 作者：A. Bogatov;D. Nukhov;K. Pyankov
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Math modelling;
- Hot-rolled plate;
- Stressed and strained states;
- Strained state parameters;
- Degree of shear deformation;
70.Experimental investigation of energy dissipation properties of fibre reinforced plastics with hybrid lay-ups under high-velocity impact loads

机译：高速冲击载荷下混杂叠层纤维增强塑料耗能特性的实验研究
- 作者：M. Romano;C. Hoinkes;I. Ehrlich
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- gibre reinforced plastics;
- High velocity impact;
- Energy dissipation;
- Hybrid stacking;
- autoclace processing;
71.Construction similarity in the process of creating ordered construction families

机译：创建有序施工族的过程中的施工相似性
- 作者：P. Gendarz;R. Rzasinski;D. Rabsztyn
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Constructional design;
- Series of types;
- Module system;
- Theory of similarity;
72.The influence of ECAP geometry on the effective strain distribution

机译：ECAP几何形状对有效应变分布的影响
- 作者：R. Kocisko;T. Kvackaj;A. Kovacova
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- ECAP;
- FEM;
- Homogeneity of deformation;
73.Transmission of polarized light in LHM and RHM materials with periodic refractive index

机译：具有周期性折射率的LHM和RHM材料中的偏振光透射
- 作者：S. Gams;J. Gams;M. Nabiatek
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Left-handed materials;
- Transmission maps;
- Discretization;
- Band structure;
- Transfer matrix method algorithm;
74.Rolling process and material properties modelling

机译：轧制过程和材料特性建模
- 作者：J. Knobloch;P. Skopec
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Rolling mill;
- Rolling model;
- Material properties;
- Adaptation;
- Simulation;
75.The effects of severe temperature changes and high humidity on porous CFRP

机译：剧烈的温度变化和高湿度对多孔CFRP的影响
- 作者：H. Dinnebier;I. Ehrlich
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Porosity;
- Voids;
- Computed tomography;
- CFRP;
76.Cost comparison between oxyfuel and plasma cutting low alloy steel

机译：氧燃料和等离子切割低合金钢的成本比较
- 作者：A. Rzeznikiewicz
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Cutting cost comparison;
- Economical analysis;
- Plasma cutting;
- Oxyfuel flame cutting;
- HTPAC;
77.Description of selected practical properties of materials produced based on fine-fraction inorganic waste

机译：基于细粒无机废物生产的材料的选定实用性能的描述
- 作者：A. Zawada;I. Lisiecka;J. Iwaszko
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Fine fraction;
- Cullet;
- Slag;
- Dust;
- Sintering;
78.Tools and methods used by the Polisl leading automotive companies in quality management system. Results of empirical research

机译：Polisl领先的汽车公司在质量管理体系中使用的工具和方法。实证研究结果
- 作者：K. Hys
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Quality Management System (QMS);
- Leading automotive companies;
- Poland;
- Empirical research;
79.Calculation of volume fractions of microstructural components in steels cooled from the austenitizing temperature

机译：从奥氏体化温度冷却的钢中微结构成分的体积分数的计算
- 作者：J. Trzaska
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Computational Material Science;
- Steels;
- Statistic Methods;
- CCT diagrams;
80.Interactive rehabilitation of small children with lower limbs dysfunction

机译：小儿下肢功能障碍的互动康复
- 作者：I. Chuchnowska;A. Sekala;A. Dobrzariska-Danikiewicz
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Biomechanics;
- Rehabilitation;
- Kinesiotherapy;
- EEG sensor;
81.Laser beam welding of Ti/Al dissimilar thin sheets - a literature review

机译：Ti / Al异种薄板的激光束焊接-文献综述
- 作者：K. Kalaiselvan;A. Elango
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Laser beam welding;
- Mechanical properties;
- Titanium;
- Aluminium;
- Thin sheets;
82.Roughness and microstructure of the AMPCO 45 complex alloyed bronze eroded through cavitation

机译：空化腐蚀的AMPCO 45复合合金青铜的粗糙度和微观结构
- 作者：O.V. Oanca;I. Bordeasu;I. Mitelea
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Cavitation erosion;
- Roughness;
- Microstructure;
- Complex alloyed bronze;
83.Effect of tungsten content on glass forming ability and microhardness of Ni-Cr-B-W metallic glasses

机译：钨含量对Ni-Cr-B-W金属玻璃的玻璃形成能力和显微硬度的影响
- 作者：A. Hitit;P. Oztiirk;H. Sahin
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Amorphous materials;
- Ni-based alloy;
- Hardness;
84.The wall thickness distributions in longitudinal sections hydromechanically bulged axisymmetric components made from copper and steel tubes

机译：纵向截面的壁厚分布，由铜和钢管制成的流体力学膨胀的轴对称构件
- 作者：T. Mitek
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Hydromechanical bulge forming;
- Hydroforming;
- Axisymmetric component;
- The wall thickness distribution;
85.In-situ testing and heterogeneity of UFG Cu at elevated temperatures

机译：高温下UFG Cu的原位测试和非均质性
- 作者：M. Petrenec;P. Kral;J. Dvorak
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- In-situ testing;
- Heterogeneity;
- Creep behavior;
- EBSD;
86.Modal analysis of honeycomb panels and the influence of boundary conditions on the calculation

机译：蜂窝板的模态分析及边界条件对计算的影响
- 作者：J. Vlach;N. Pomp
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
87.CrMoV steel welding in the narrow gap using of SAW technology

机译：使用SAW技术在CrMoV钢中进行窄缝焊接
- 作者：L. Holub;J. Dunovsky;J. Suchanek
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- SAW;
- Narrow gap;
- CrMoV steel;
- Rotor;
- impact toughness;
- Strength;
- Heat treatment;
- Heat-affected zone;
- Hot cracks;
- Cold cracks;
88.Experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method

机译：自由衰减法研究单向和织物增强塑料阻尼特性的实验研究
- 作者：M. Romano;M. Micklitz;R Olbrich
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Structural vibration;
- Damping;
- Fibre reinforced plastics;
- Mesomechanic scale;
- Fabric reinforced layer;
- Ondulation;
89.The selected properties of fusion of Fe foam and sheet metal with use of the Nd:YAG laser

机译：Nd：YAG激光对Fe泡沫与金属薄板融合的选定性能
- 作者：P. Mlynarczyk;W. Depczynski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Laser welding;
- Fe foam;
- Porous materials;
- Superaloys;
90.Characterization and wear properties of carbon nanotubes incorporated ceramic coatings on Ti6Al4V and Ti6Al7Nb alloys

机译：Ti6Al4V和Ti6Al7Nb合金上掺有碳纳米管的陶瓷涂层的表征和磨损性能
- 作者：S.K. Yazici;F. Muhaffel;Y. Yurekturk
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Titanium alloy;
- Micro arc oxidation;
- Titania coating;
- Carbon nanotubes;
- Wear Resistance;
91.The effect of the laser spots overlap on the structure during square parts quenching

机译：在方形零件淬火期间，激光光斑对结构的影响重叠
- 作者：V. Kirschner;M. Svec;R. Bruthansova
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Laser quenching;
- Laser spots overlap;
- Microstructure;
92.Strength properties of the low-melting point alloys

机译：低熔点合金的强度性能
- 作者：L. Wierzbicki
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Metallic alloys;
- Mechanical properties;
- Low melting point alloy;
- Fusible alloy;
- Bismuth alloys;
93.Analysis of stresses in Al-5%Si alloy under loading conditions

机译：载荷条件下Al-5％Si合金的应力分析
- 作者：J. Borowiecka-Jamrozek;J. Lachowski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Al-Si alloy;
- Tensile test;
- Voids;
- Computer modelling;
94.The influence of pressure to the stresses inside the plough body

机译：压力对犁体内部应力的影响
- 作者：S. Garus;M. Nowak;J. Garus
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Mouldboard design;
- Plough design;
- FEM analysis;
- Stress analysis;
95.Investigation of human mesenchyma stem cells culture on nanofibrous polyurethane scaffolds and films

机译：人间质干细胞在纳米纤维聚氨酯支架和膜上的培养研究
- 作者：B. Celebi-Saltik;M.O. Oteyaka
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Nanomaterials;
- Biomaterials;
- Mesenchymal stem cells;
- Polyurethane;
- Electrospinning;
96.Properties of chirped periodic layered medium with metamaterial layers

机译：具有超材料层的chi周期性分层介质的性质
- 作者：J. Garus;S. Garus;K. Btoch
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期
- Transmission;
- Multilayers;
- Superlattices;
- Aperiodic;
- LHM;
- RHM;
97.New nuclear advanced facilities at CVREZ

机译：CVREZ的新核先进设施
- 作者：X.C. Arnoult;M. Zychova;M. Ruzickova
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Mechanical test;
- High temperature;
- Corrosion;
- Loops;
98.Introcuction to solving task-level programming problems in logic programming language

机译：解决逻辑编程语言中的任务级编程问题的简介
- 作者：K. Foit
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Robotics;
- Task-level programming;
99.Computer simulation of forging process of axially symmetrical forging with hammer

机译：锤子轴向对称锻造过程的计算机模拟
- 作者：P. Thomas
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第2期
- Metal forming;
- Numerical simulation;
- Die forging;
100.Optimization of chemical composition and heat treatment condition of structural steel

机译：结构钢化学成分和热处理条件的优化
- 作者：R. Honysz;L.A. Dobrzanski
- 期刊名称：《Journal of Achievements in Materials and Manufacturing Engineering》 | 2014年第1期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号