首页>外文期刊>The International Journal for manufacturing Science and Production

The International Journal for manufacturing Science and Production

中文名称：国际制造业科学与生产杂志

ISSN：0793-6648
出版周期：Quarterly

发文量：133

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Acoustic emission generated from tool flank contact in diamond turning

机译：金刚石车削时刀具侧面接触产生的声发射
- 作者：Gi Heung Choi;Gi Sang Choi
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第4期
- Acoustic emission;
- Rubbing friction;
- Chip formation;
2.Strategies for a generic intelligent control system for grinding. part 2: internal CBN grinding

机译：通用磨削智能控制系统的策略。第2部分：内部CBN研磨
- 作者：W. Brian Rowe;J. L. Moruzzi;B. Mills
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第2期
3.Current-voltage and capacitance-voltage characteristics of Au-GaAs Schottky diodes under hydrostatic pressure

机译：静水压力下Au / n-GaAs肖特基二极管的电流-电压和电容-电压特性
- 作者：G. Cankaya;N. Ucar
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第3期
4.Characterization of the framework actuator for layer adjusting

机译：用于层调整的框架执行器的特性
- 作者：M. Geiger;A. Huber
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第3期
- Laser adjusting;
- Laser forming;
- Modelling;
- FEM;
- Nd: YAG-laser;
- Actuator;
5.SAM-an object-oriented fuzzy expert system for rotating cutter selection and cutting condition design

机译：SAM-用于旋转刀具选择和切削条件设计的面向对象的模糊专家系统
- 作者：Ruxu Du;Xin Yuan
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第2期
6.Integrated inspection and compensation system for a CNC turning center

机译：数控车削中心的集成检查和补偿系统
- 作者：Liu Zhan-Qiang;Venuvinod Patri K.
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第1期
7.Strategies for a generic intelligent control system for grinding. part 1: development

机译：通用磨削智能控制系统的策略。第1部分：开发
- 作者：W. Brian Rowe;J. L. Moruzzi;B. Mills
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第2期
8.Abrasive fine finishing processes--a review

机译：研磨精加工工艺-综述
- 作者：R. K. Jain;V. K. Jain
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第1期
9.The experimental and theoretical comparison of characteristic parameters of Au-Sb-Si/Au Schottky diodes with and without layer

机译：有无层Au-Sb / n-Si / Au肖特基二极管特性参数的实验和理论比较
- 作者：Tahsin Kilicoglu;Sezai Asubay
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第3期
10.Relational CAPP (Computer aided process planning) system

机译：关系CAPP（计算机辅助过程计划）系统
- 作者：Gideon Halevi
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第4期
- Process planning matrix;
- CAPP;
- Dynamic programming;
- Production management;
11.FEM-simulation of multistage wire drawing with backward force considering the material damage

机译：考虑材料破坏的后向力多级拉丝的有限元模拟
- 作者：Eckart Doege;Andre Kroff
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第4期
- Wire drawing;
- FE-simulation;
- Multi-stage drawing;
- Void propagation;
- Central burst;
12.Modeling and characterization of surface profile under random tool vibration in turning

机译：车削中随机刀具振动下的表面轮廓建模与表征
- 作者：Gi H. Choi;Gi S. Choi
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第1期
13.NC-postprocessing and NC-simulation for five-axis milling operations with automatic collision avoidance

机译：具有自动防撞功能的五轴铣削加工的NC后处理和NC模拟
- 作者：J. P.Kruth;B. Lauwers;P. Klewais;P. Dejonghe
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第4期
- CAM;
- NC-postprocessing;
- NC-simulation;
- Five-axis milling;
14.Statistical process control: implementation issues in semiconductor manufacturing

机译：统计过程控制：半导体制造中的实施问题
- 作者：Chris J. McDonald;Richard Babikian
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第3期
15.Analysis and optimization of the contact pressure distribution between an insert and its pocket due to the clamping and the cutting action

机译：分析和优化由于夹紧和切削作用而引起的刀片与其凹槽之间的接触压力分布
- 作者：I. Lopatukhin;A. Ber;J. Rotberg
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第1期
16.Teaching manufacturing integration through research deployed software modules

机译：通过研究部署的软件模块教授制造集成
- 作者：Shivakumar Raman;Ashish Desai;P. Simin Pulat;Bobbie L. Foote
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第1期
17.Prediction of the tool life function based on the tool-work thermocouple temperature during milling

机译：基于铣削过程中刀具工作热电偶温度的刀具寿命函数预测
- 作者：P. Kovac;M. Gostimirovic;D. Milikic
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第4期
18.Improvement of drilling performance by vibratory cutting

机译：通过振动切削提高钻孔性能
- 作者：Hidetake Kubota
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第2期
- Drilling;
- Tool life;
- Chip vibratory cutting;
19.Results of the international survey on the optimisation of availability in complex assembly systems

机译：关于优化复杂装配系统中的可用性的国际调查的结果
- 作者：Hans-Peter Wiendahl;Carsten Kohrmann
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第4期
20.A biaxial actively damped boring bar for chatter mitigation

机译：双轴主动阻尼镗杆，可减轻震颤
- 作者：Jim Redmond;Pat Barney;David Smith
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第1期
21.On the experimental forward capacitance-voltage characteristics of Schottky barrier diodes

机译：肖特基势垒二极管的实验正向电容-电压特性
- 作者：E. Ayyildiz;C. Nuhoglu;M. Saglam;A. Turut
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第3期
22.Detection of disturbances in autonomous production cells using intelligent evaluation strategies

机译：使用智能评估策略检测自主生产单元中的干扰
- 作者：F. Klocke;G. Ketteler;M. Reuber;M. Rehse
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 1999年第3期
23.Towards an integration of engineering knowledge management and knowledge based engineering

机译：致力于工程知识管理和基于知识的工程的集成
- 作者：Rudiger Klein
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Engineering knowledge management;
- Knowledge based engineering;
24.Improvement of thin-walled cylindrical workpiece machining accuracy by means of control programs

机译：通过控制程序提高薄壁圆柱工件的加工精度
- 作者：I. Lopatukhin;R. Talybov;A. Ber
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第1期
- Machining;
- Displacement;
- Accuracy (Precision );
25.Interdisciplinary development of mechatronic systems

机译：机电系统的跨学科发展
- 作者：W. Dohmen
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Mechatronic;
- Systems engineering;
- Computer aided design;
- Computer aided planning;
- Knowledge based system;
26.Optical absorption and urbach tails in layered semiconductor Il{sub}0.999GaPr{sub}0.001Se{sub}2 and TlGaSe{sub}2

机译：层状半导体Il {sub} 0.999GaPr {sub} 0.001Se {sub} 2和TlGaSe {sub} 2中的光吸收和urbach尾部
- 作者：B. Gurbulak;M. Yildirim;S. Duman;S. Tuzemen
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第1期
27.Recovering variable radius rolling ball blends in reverse engineering

机译：在逆向工程中恢复变径滚动球混合物
- 作者：Geza Kos
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Reverse engineering;
- Surface reconstruction;
- Variable radius rolling ball blends;
28.Disassembiosis: a system to study product configuration optimization for end-of-life disassembly

机译：Disassembiosis：一个用于研究产品配置优化的系统，用于报废拆卸
- 作者：Shivakumar Viswanthan;Venkat Allada
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
29.Knowledge-based environment for the generation of rapid product development processes

机译：基于知识的环境，用于生成快速的产品开发流程
- 作者：Alain Bernard;Alexandre Deglin
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Knowledge-based system;
- Rapid product development;
- Optimization;
30.Evaluation of uncertainty in geometrical measurements: a pragmatic approach

机译：几何测量不确定度的评估：一种务实的方法
- 作者：Giulio Barbato;Maurizio Galetto;Raffaello Levi
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
31.A backward mapping approach for complex system design

机译：用于复杂系统设计的向后映射方法
- 作者：Ping Ge;Stephen C. -Y. Lu;Nanxin Wang
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Backward mapping;
- Complex system;
- Early stage of parametric design;
32.Multi-reconstruction of a 3D freeform object from range images

机译：通过距离图像对3D自由形式对象进行多重重建
- 作者：J. Barhak;A. Fischer
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Reverse engineering;
- Parameterization;
- Range images;
- Freeform objects;
33.Balancing assembly lines with simulation

机译：通过仿真平衡装配线
- 作者：Isabel C. Praca;Carlos Ramos
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第1期
- Manual assembly lines;
- Balancing;
- Simulation;
- Multi-agent systems;
34.Intuitive design method (IDM): a new framework for design method integration

机译：直观的设计方法（IDM）：设计方法集成的新框架
- 作者：Denis Cavallucci;Philippe Lutz;Fabrice Thiebaud
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Design process;
- Design methods;
- Intuitive design method;
- Integration;
35.Laboratory versus industrial cutting force sensor in tool condition monitoring

机译：刀具状态监测中的实验室与工业切削力传感器
- 作者：Krzysztof Jemielniak;Marek Balazinski
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第1期
36.The relationship between crystal width and dislocation density in β-Sn single crystals

机译：β-Sn单晶的晶体宽度与位错密度的关系
- 作者：Bthattin duzgun;I. Aytas;I. Karaman;Ucar
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第1期
37.Representation of functional relations among parts and its application to product failure reasoning

机译：零件之间功能关系的表示及其在产品故障推理中的应用
- 作者：Tomoyuki Hata;Noritomo Kobayashi;Fumihiko Kimura;Hiromasa Suzuki
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Function;
- Failure identification;
- FMEA;
38.Next generation manufacturing systems

机译：下一代制造系统
- 作者：Kenneth Preiss
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Agility;
- Next-generation-manufacturing;
- Globalization;
- Knowledge economy;
39.Combined use of simulation and AI/machine learning techniques in designing manufacturing processes and systems

机译：在设计制造流程和系统中结合使用仿真和AI /机器学习技术
- 作者：Laszlo Monostori;Botond Kadar;Zsolt Janos Viharos;Istvan Mezgar;Peter Stefan
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Production;
- Simulation;
- Artificial intelligence;
- Machine learning;
40.SLS - layer manufacturing a powerful complementary technology in the RPD (rapid product development) cycle

机译：SLS-在RPD（快速产品开发）周期中制造强大的互补技术的层
- 作者：Gideon N. Levy
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Rapid prototyping;
- Design;
- Layer manufacturing;
- Powder;
- Casting;
- Moulds;
41.A paradigm shift in conceptual design

机译：概念设计的范式转变
- 作者：April Gillam;Stephen Presley
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Conceptual design;
- Design methodology;
- Paradigm shift;
42.Three-dimensional programming and simulation of PLC-controlled manufacturing systems

机译：PLC控制的制造系统的三维编程和仿真
- 作者：D. Spath;Robert Landwehr
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
43.Neural network based process design of cold forged shafts with different work materials

机译：基于神经网络的不同工作材料冷锻轴的工艺设计
- 作者：R. Teti;A. Langella;D. DAddona
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Cold forging;
- Process design;
- Neural networks;
44.Excitonic absorption processes and urbach tails in Ga{sub}(1-x)In{sub}xSe and GaSe single crystals

机译：Ga {sub}（1-x）In {sub} xSe和GaSe单晶中的激子吸收过程和urbach尾巴
- 作者：B. Gurbulak;M. Yildirim;S. Agayeva;M. Alieva
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第1期
45.Design of control and monitoring rules for state dependent processes

机译：设计状态相关过程的控制和监视规则
- 作者：Irad Ben-Gal;Armin Shmilovici;Gail Morag
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2000年第4期
- Process control;
- Control charts;
- Context algorithm;
46.Feature based continuous cutting conditions optimization on the tool path in 2.5 axis milling

机译：基于特征的2.5轴铣削中刀具路径上的连续切削条件优化
- 作者：K. D. Bouzakis;R. Paraskevopoulou
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第1期
47.Industrial ecology as a strategic instrument for sustainability

机译：工业生态学作为可持续发展的战略工具
- 作者：Knut Krik Solem;Helge Brattebo
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第2期
- Industrial ecology;
- Sustainability;
- Decision-making;
- Producer responsibility;
48.An inter-machine activity coordination based approach for dynamic job shop scheduling

机译：基于机器间活动协调的动态作业车间调度方法
- 作者：Ana Madureira;Carlos Ramos;Silvio Do Carmo Silva
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第2期
- Scheduling;
- Dynamic scheduling;
- Genetic algorithms;
- Coordination mechanism;
49.A tool for quick assessment of environmental impact and implications of manufacturing processes and products

机译：快速评估环境影响以及制造过程和产品影响的工具
- 作者：SK. Ong
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第1期
- Environmental-conscious manufacturing;
- Life-cycle assessment;
- Impact assessment;
50.Effect of the mechanical stresses developed during gear hobbing on the fatigue failure of tool coatings

机译：滚齿过程中产生的机械应力对工具涂层疲劳破坏的影响
- 作者：Ing. Habil K. D. Bouzakis;Dipl. Ing. N. Vidakis
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第1期
- Gear;
- Hobbing;
- Coating;
- Fatigue;
51.Absorption properties of layer semiconductor TlGaSe{sub}2 doped Gd

机译：层状半导体TlGaSe {sub} 2掺杂的Gd的吸收特性
- 作者：Bekir Gurbulak;Syedi Dogan;Aytunc Ates;Muhammet Yildirim;S. Kh. Agaeva;Sebahattin Tuzemen
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第2期
52.Bush making by thermal flow drilling in copper and brass

机译：通过热流钻加工铜和黄铜制成的衬套
- 作者：J. Vergara;S. Damm;J. Villanueva;J. M. Godoy;F. Tikal
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第2期
53.Modeling of the workpiece geometry in turning of hardened steel

机译：淬硬钢车削中工件几何形状的建模
- 作者：Ralph Dollmeier;Gunter Warnecke
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第2期
- Hard turning;
- Finite element method;
- Form and dimensional deviations;
54.Application of an ultraprecision milling machine based on friction-free drive concept to micromachining

机译：基于无摩擦驱动理念的超精密铣床在微加工中的应用
- 作者：Kiyoshi Sawada;Tomohiko Kawai;Yoshimi Takeuchi
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第2期
55.Application of genetic algorithms in cost estimation of gearing products

机译：遗传算法在齿轮产品成本估算中的应用
- 作者：S. K. Ong;Y. F. Jiang;A. Y. C. Nee
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第1期
- Cost estimation;
- Genetic algorithm;
- Activity-based costing;
56.Hydroforming apparatus for testing circular plates

机译：用于测试圆板的液压成型设备
- 作者：A. H. Elkholy;O. M. Al-Hawaj;M. A. Said
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2001年第1期
57.Remote monitoring and diagnosis for control of EDM parameters

机译：远程监控和诊断以控制EDM参数
- 作者：Z. Katz;C. Cilliers
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2002年第3期
58.Toward dynamic scheduling of manufacturing

机译：向制造动态调度
- 作者：Ana Almeida;Carlos Ramos;Silvio do Carmo Silva
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2002年第3期
- Dynamic scheduling;
- Decision support system;
- Manufacturing orders;
- Scheduling behavior and agenda;
59.Addressing the facilities layout design problem through constraint logic programming

机译：通过约束逻辑编程解决设施布局设计问题
- 作者：Jose Tavares;Carlos Ramos;Jose Neves
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2002年第3期
- Plant layout;
- Facilities;
- Layout;
- Constraint satisfaction;
- Constraint logic programming;
- Layout design;
60.CEPP - conversion and execution of process plans: a new method

机译：CEPP-流程计划的转换和执行：一种新方法
- 作者：Lino Figueiredo;Ana Almedia;Carlos Ramos
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2002年第3期
- Process plan;
- CAD/CAM (computer aided design/computer aided manufacturing);
61.Grinding performance of high-porosity fine-grain vitrified CBN wheels for inconel 718

机译：铬镍铁合金718的高孔隙率细晶粒玻璃化CBN砂轮的磨削性能
- 作者：R. Ca;W. B. Rowe;M. N. Morgan
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
62.Wavelet Bayesian method for denoising of nano-scalar surface measurement

机译：小波贝叶斯方法对纳米标量表面测量的去噪
- 作者：S. J. Xiao;X. Q. Jiang;L. Blunt
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
63.Stimulating design reuse through automated coding

机译：通过自动编码促进设计重用
- 作者：D. M. Love;J. A. Barton
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
64.A matrix approach for forging error assessment

机译：锻造误差评估的矩阵方法
- 作者：H. Ou
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
65.A novel case based reasoning system for selecting grinding parameters for superalloys

机译：基于案例的新型推理系统，用于选择高温合金的磨削参数
- 作者：E. O. Ezugwu;P. Burrell;A. Shabazz Nelson
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
66.Turned aluminium alloys surface finish monitoring through cutting force measurements

机译：通过切削力测量监控车削铝合金表面的光洁度
- 作者：M. A. Sebastian;J. M. Sanchez-Sola;J. M. Gonzalez;M. S. Carrilero;M. Alvarez;M. Marcos
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第4期
- Turning;
- Surface finish;
- Monitoring;
- Cutting force;
- UNS A92024;
67.Automatic determination of sheet metal bending sequences

机译：自动确定钣金弯曲顺序
- 作者：J. C. Rico Fernandez;J. M. Gonzalez Alvarez;S. Mateos Diaz
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第4期
- Sheet metal;
- Bending;
- Bending sequences;
- CAPP;
68.FE simulation for development of process design considerations - an industry-case study

机译：有限元模拟以开发工艺设计注意事项-行业案例研究
- 作者：Y. Qin;R. Balendra
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
69.CAM system for layer-based EDM

机译：基于层的EDM CAM系统
- 作者：S. Dimov;D. T. Pham;A. Ivanov;K. Popov;V. Rangel
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
70.An Integrated Assessment of Manufacturing Flexibility

机译：制造灵活性的综合评估
- 作者：R. Calvo;R. Domingo;M.A. Sebastian
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第3期
- Flexibility;
- Operational flexibility;
- Flexible assembly systems;
- Manufacturing systems;
71.The electrical characteristics of the fabricated lateral trench electrode IGBT for intelligent power IC

机译：制备的用于智能功率IC的横向沟槽电极IGBT的电气特性
- 作者：Ey Goo Kang;Sangsig Kim;Man Young Sung
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第4期
- Lateral trench electrode;
- Intelligent power IC;
- Latch-up;
- High breakdown voltage;
72.Artificial neural networks for improving the cost model development process

机译：人工神经网络，用于改进成本模型开发过程
- 作者：Q. Wang;D. J. Stockton
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
73.Finite element simulation of impulsive drawing of square cups

机译：方杯冲量图的有限元模拟
- 作者：N. Wijayathunga;D. Webb;K. Kormi
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
74.Optimal scheduling utilizing factorial analysis and constrained optimisation

机译：利用因子分析和约束优化的最优调度
- 作者：K. J. Darbyshire;G. Waterworth
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
75.Silicon micro-machined vibrating gyroscope

机译：硅微机械振动陀螺仪
- 作者：Yan Su;Henggao Ding;Shou-Rong Wang
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第4期
- Gyroscope;
- Micro-machined;
- Feedback;
76.Information theory as a measure of schedule complexity

机译：信息论作为进度计划复杂性的度量
- 作者：S. Kariuki;J. Efstathiou
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
77.Structure-based aggregate process models for complex assemblies

机译：用于复杂装配的基于结构的聚合过程模型
- 作者：P. Chapman;B. Rogers;D. G. Bramall;K. R. KcKay;P. G. Maropoulos
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
78.Cutting Speed and Feed Based Cutting Force Parametric Model for Dry Turning of AA2024 Alloy

机译：基于切削速度和进给的切削力参数模型用于AA2024合金干式车削
- 作者：M. A. Sebastian;J. M. Sanchez-Sola;M. S. Carrilero;J. M. Gonzalez;J. Cano;M. Marcos
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第3期
- Cutting Force;
- Cutting Speed;
- Feed;
- Dry Turning;
- AA2024;
- Cutting Parametric Model;
79.Operational factors that influence the successful adoption of Internet technology in manufacturing

机译：影响制造业成功采用互联网技术的运营因素
- 作者：Roger Beach
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
80.Genetic algorithms applied to material utilization in leather shoe manufacturing

机译：遗传算法应用于皮鞋制造中的材料利用
- 作者：Alan Crispin;Paul Clay;Gaynor Taylor;Tom Bayes;Robert Hackney;David Reedman
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
81.A simulated investigation on machining instability and non-linear aspects in CNC turning processes

机译：CNC车削过程中加工不稳定性和非线性方面的模拟研究
- 作者：X. K. Luo;K. Cheng;X. C. Luo
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
- Instability in turning;
- Non-linear dynamics;
- Simulation;
82.Parametric model for predicting surface finish to machined UNS A92024 alloy bars

机译：用于预测机加工UNS A92024合金棒表面光洁度的参数模型
- 作者：M. A. Sebastian;J. M. Sanchez-Sola;M. S. Carrilero;J. M. Gonzalez;M. Alvarez;M. Marcos
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第4期
- Turning;
- Cutting speed;
- Feed;
- Roughness;
- Surface finish;
- UNS A92024;
83.A Fuzzy System for the Estimation of Machining Times

机译：加工时间估计的模糊系统
- 作者：Omer Vulkan;Armin Shmilovici
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第3期
- Machining time estimation;
- Fuzzy Systems;
- Cost Estimation;
84.An analysis of the effects of distributed light sources for surface gradient recovery using reflectance maps and computer simulation

机译：使用反射贴图和计算机仿真分析分布式光源对表面梯度恢复的影响
- 作者：A. R. Farooq;M. L. Smith;L. N. Smith;P. S. Midha
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
85.The improvement of geometric accuracy of FMS machine through retrofitting and compensation

机译：通过改造和补偿提高FMS机器的几何精度
- 作者：Qiang Xu;James Cunningham;Derek Ford
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
86.Web-based manufacturing management for collaborative e-manufacturing

机译：基于Web的制造管理以进行协作式电子制造
- 作者：Haiyan Zhang;Zhengxu Zhao;Ray W. Baines
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
- E-manufacturing;
- Collaborative systems;
- Internet;
- Customization;
87.Sensibility Analysis of the Uncertainty in an Exact Formulation of the Indirect Pin Gauge Method for Tapered Components

机译：锥形零件间接销规精确公式中不确定度的敏感性分析
- 作者：L. Seviila;M.A. Sebastian
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第3期
- Uncertainty;
- Taper;
- Indirect measure;
- Pin gauges;
88.An online chatter detection and control system for the high speed machining of moulds and dies

机译：用于模具高速加工的在线颤振检测和控制系统
- 作者：W. M. Sim;R. C. Dewes;D. K. Aspinwall
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
89.Simulation of Advanced Manufacturing of Solids and Porous Materials

机译：固体和多孔材料先进制造的模拟
- 作者：A. G. Mamalis;D. E. Manolakos;M. B. Ioannidis;A. Markopoulos;I. N. Vottea
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第3期
- Finite Element Method;
- Simulation;
- Forging;
- Deep-drawing;
- Machining;
- Grinding;
- Dynamic powder compaction;
90.CAD genetic algorithms for evolutionary form and function design

机译：用于进化形式和功能设计的CAD遗传算法
- 作者：Keith Case;Ian Graham;Bob Wood;M. S. Abdul Karim
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2003年第2期
91.Experimental Investigations on Work Roll Grinding of D2 Steel for the Selection of Optimal Parameters

机译：D2钢工作辊磨削最佳参数选择的实验研究。
- 作者：N. Mohanasundararaju;R. Sivasubramanian;N. Alagumurthi
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第2期
- Work roll grinding;
- Surface roughness;
- Artificial Neural Network;
- Taguchi technique;
- Orthogonal array;
- Optimization;
92.Improving Productivity in Manufacturing 'S' Cam Shafts Using Implementation of Lean Manufacturing System

机译：通过实施精益制造系统来提高S型凸轮轴的生产率
- 作者：M. Murugan;V. Selladurai
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第4期
93.Effects of Minimum Quantity Lubrication (MQL) on Chip Formation Mode, Tool Wear, and Surface Roughness in Turning AISI-1040 Steel with Uncoated Carbide Tool

机译：无涂层硬质合金车削AISI-1040钢时，最小润滑量（MQL）对切屑形成模式，刀具磨损和表面粗糙度的影响
- 作者：Mithu M. A. H.;Khan M. M. A.;Dhar N. R.
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第2期
- MQL;
- Turning;
- Tool wear;
- Surface roughness;
- Steel;
- Carbide tools;
94.Modelling of EDM Process Parameters for Machining Stainless Steel using Copper Electrodes

机译：铜电极加工不锈钢的EDM工艺参数建模
- 作者：Suleiman Abdulkareem;Ahsan Ali Khan
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第2期
- Austenitic stainless steel;
- DOE;
- EDM;
- Empirical relations;
- MRR;
- Surface roughness;
95.Pertinets with Particle Swarm Optimization Technique for Resource Leveling

机译：用粒子群优化技术进行资源分配
- 作者：S. Kumanan;K. Raja
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第4期
- Project management;
- Petri Nets;
- Particle swarm optimization technique (PSO) Resource leveling;
96.Using Interval Constrained Petri Nets for Reactive Control Design A tobacco manufacturing application

机译：使用区间约束Petri网进行无功控制设计烟草制造应用
- 作者：Dhouibi H.;Collart Dutilleul S.;Nabli L.;Craye E.
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第4期
- Petri Nets;
- Manufacturing;
- Reactivity;
- Robustness;
97.Prediction of Tensile Strength of Friction Stir Welded A356 Cast Aluminium Alloy Using Response Surface Methodology and Artificial Neural Network

机译：响应面法和人工神经网络预测搅拌摩擦铸造A356铝合金的拉伸强度
- 作者：M. Jayaraman;R. Sivasubramanian;V. Balasubramanian;A. K. Lakshminarayanan
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第2期
- Friction stir welding;
- A356 aluminium alloy;
- Tensile strength;
- Response surface methodology;
- Artificial neural network;
98.Superplastic Behavior of a Ti-Al-Mn Alloy

机译：Ti-Al-Mn合金的超塑性行为
- 作者：B. Yogesha;S. S. Bhattacharya
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第2期
- Superplastic behavior;
- Ti-Al-Mn alloy;
- Elongation to failure;
- Strain;
- Rate;
99.Multi-Objective Scheduling of Jobs, Automated Guided Vehicles and Automated Storage/Retrieval System in Flexible Manufacturing System

机译：柔性制造系统中的作业，自动导引车和自动存储/检索系统的多目标计划
- 作者：J. Jerald;A. GnanavelBabu;A. Noorul Haq
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第2期
- Flexible Manufacturing System;
- Scheduling;
- Multi Objective Function;
- Non Traditional Optimization Techniques;
100.Fractal Dimension Modeling of Surface Profile and Optimization in EDM Using Response Surface Method

机译：响应曲面法在电火花加工中表面轮廓的分形维建模和优化
- 作者：P. Sahoo;T. K. Barman;B. C. Routara
- 期刊名称：《The International Journal for manufacturing Science and Production》 | 2008年第2期
- Fractal dimension;
- EDM;
- Response surface method;
- Optimization;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号