首页>外文期刊>International Journal of Abrasive Technology

International Journal of Abrasive Technology

中文名称：国际磨料技术杂志

ISSN：1752-2641
出版周期：Quarterly

发文量：168

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Modelling of the micro-grinding process considering the grinding tool topography

机译：考虑研磨工具形貌的微型研磨过程建模
- 作者：Mohammadali Kadivar;Ali Zahedi;Bahman Azarhoushang;Peter Krajnik
- 期刊名称：《International Journal of Abrasive Technology》 | 2017年第2期
- Single-grain interaction;
- Micro grinding;
- Diamond grinding pin;
- Grinding pin topology;
2.Wheel lift-off in creep-feed grinding: thermal damage, power surge, chip thickness and optimisation

机译：蠕变式磨削中的车轮剥离：热损坏，电力浪涌，芯片厚度和优化
- 作者：Radovan Drazumeric;Jeffrey A. Badger;Peter Krajnik
- 期刊名称：《International Journal of Abrasive Technology》 | 2017年第2期
- Grinding;
- Tooling;
- Thermal damage;
- Optimisation;
3.An experimental study on the prediction of grinding wheel dressing intervals by relating wheel loading and surface roughness

机译：通过相关轮装载和表面粗糙度预测砂轮敷料间隔预测的实验研究
- 作者：Vipin Gopan;K. Leo Dev Wins;Arun Surendran
- 期刊名称：《International Journal of Abrasive Technology》 | 2019年第3期
- wheel loading;
- artificial neural network;
- ANN;
- image processing;
- wheel dressing;
- particle swarm optimisation;
- PSO;
- condition monitoring;
- machine vision;
- optimisation;
- image segmentation;
- thresholding;
- abrasive grains;
- chip removal;
4.Design and validation of a kinematic numerical dressing model of conventional grinding wheels

机译：常规砂轮运动数值敷料模型的设计与验证
- 作者：Aitzol Galletebeitia;Jorge Alvarez;I?igo Pombo;David Barrenetxea;Jose Antonio Sanchez
- 期刊名称：《International Journal of Abrasive Technology》 | 2019年第2期
- dressing;
- grinding;
- topography;
- abrasive surface;
- grinding wheel;
5.Research on scan polishing flat surfaces with a small diameter tool

机译：小直径工具扫描抛光平面的研究
- 作者：He Wang;Weimin Lin
- 期刊名称：《International Journal of Abrasive Technology》 | 2019年第3期
- NiP;
- finishing;
- material removal velocity;
- polishing models;
6.An experimental study for evaluating speed parameters on surface roughness of LS-WEDT and its application in fabricating microelectrodes

机译：LS-WEDT表面粗糙度评估速度参数的实验研究及其在制造微电极中的应用
- 作者：Yadong Gong;Yao Sun;Xiaoteng Ma
- 期刊名称：《International Journal of Abrasive Technology》 | 2018年第4期
- LS-WEDT;
- microelectrodes;
- speed parameters;
- surface roughness;
7.Experimental study on the characteristics of high speed cylindrical plunge grinding for annealed bearing steel 100Cr6

机译：100Cr6退火轴承钢高速圆柱形磨削特性的实验研究
- 作者：Wei Liu;Zhaohui Deng;Zhouqiang Xiao
- 期刊名称：《International Journal of Abrasive Technology》 | 2018年第4期
- bearing steel;
- annealed 100Cr6;
- cylindrical plunge grinding;
- high speed;
- characteristics;
8.Development of cBN electroplated end-mill combined cutting and grinding for precision machining of CFRP

机译：CBN电镀末端研磨结合切割和磨削CFRP精密加工的研磨
- 作者：Tatsuya Furuki;Yugo Kabaya;Toshiki Hirogaki;Eiichi Aoyama;Kiyofumi Inaba;Kazuna Fujiwara
- 期刊名称：《International Journal of Abrasive Technology》 | 2018年第3期
- carbon-fibre reinforced plastic;
- CFRP;
- cubic boron nitride;
- cBN;
- electroplated end-milling;
- grinding;
- machining centre;
9.Study on the segmentation of abrasive grains in diamond tools

机译：金刚石工具磨粒分割研究
- 作者：Yanfen Lin;Congfu Fang
- 期刊名称：《International Journal of Abrasive Technology》 | 2018年第3期
- diamond tool;
- topography;
- abrasive grain;
- segmentation;
- matting;
10.Research on surface integrity in graphene nanofluid MQL milling of TC21 alloy

机译：TC21合金石墨烯纳米流体MQL研磨的表面完整性研究
- 作者：Ming Li;Tianbiao Yu;Hongyu Li;Lin Yang;Jiashun Shi;Wanshan Wang
- 期刊名称：《International Journal of Abrasive Technology》 | 2019年第1期
- graphene nanofluid;
- MQL milling;
- surface integrity;
- TC21;
11.Application of NSGA-II for optimisation of cylindrical plunge grinding process parameters

机译：NSGA-II在圆柱形磨削过程参数优化中的应用
- 期刊名称：《International Journal of Abrasive Technology》 | 2019年第4期
- cylindrical grinding;
- grinding ratio;
- NSGA-II;
- power;
- surface roughness;
12.Theoretical-experimental study of silicon carbide grinding

机译：碳化硅研磨的理论实验研究
- 作者：Mohammed Y. Tharwan;Ioan D. Marinescu;Sharaf Alsofyani;Ibrahim Basudan;Omar Bafakeeh;Bader Alqahtani;Abdulaziz Alshareef
- 期刊名称：《International Journal of Abrasive Technology》 | 2019年第2期
13.Experimental setup development and parametric study of electrochemical face grinding process using Ni-based superalloy

机译：使用Ni基超合金的实验设置开发与电化学磨削过程的参数研究
- 作者：Shyam Bihari Kaushal;Audhesh Narayan
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第1期
- MRR;
- surface roughness;
- ECFG;
- one-parameter-at-a-time approach;
- OPAT;
- wheel speed;
- feed rate;
- electrolyte concentration;
14.Parameter analysis and modelling of grinding special-shaped granite by diamond tools based on a robot stone machining system

机译：基于机器人石材加工系统的金刚石工具研磨特殊形状花岗岩参数分析与建模
- 作者：Jing Wang;Shengui Huang;Jixiang Huang;Xipeng Xu;Changcai Cui
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第1期
- special-shaped granite;
- robot machining;
- processing parameters;
- artificial neural networks;
- ANNs;
15.High-speed high-efficient grinding of CMCs with structured grinding wheels

机译：具有结构磨轮的高速高效研磨CMCS
- 作者：Bahman Azarhoushang;Mohammadali Kadivar;Robert B?singer;Sergey Shamray;Ali Zahedi;Amir Daneshi
- 期刊名称：《International Journal of Abrasive Technology》 | 2019年第1期
- high speed grinding;
- high efficiency grinding;
- ceramic matrix composites;
- CMCs;
- segmented wheel;
- laser-structure;
16.Development of nanofibre abrasive buffing pad produced with modified melt blowing method

机译：改性熔化法制备纳米纤维磨料抛光垫的研制
- 作者：Wei Wu;Eiichi Aoyama;Toshiki Hirogaki;Kenichi Urabe;Hiroyoshi Sota
- 期刊名称：《International Journal of Abrasive Technology》 | 2019年第1期
- melt-blowing method;
- nanofibre;
- oil adsorption;
- non-woven polypropylene nanofibre;
- buffing;
- buffing pad;
17.Study on the material removal mechanism of glass in single diamond grain grinding with ultrasonic vibration assisted

机译：超声波振动辅助单金刚石晶粒研磨材料去除机理研究
- 作者：Jianyun Shen;Bin Dai;Xian Wu;Yuan Li;Zhongwei Hu
- 期刊名称：《International Journal of Abrasive Technology》 | 2019年第1期
18.Wheel lift-off in creep-feed grinding: thermal damage, power surge, chip thickness and optimisation

机译：蠕变式磨削中的车轮剥离：热损坏，电力浪涌，芯片厚度和优化
- 作者：Radovan Drazumeric;Jeffrey A. Badger;Peter Krajnik
- 期刊名称：《International Journal of Abrasive Technology》 | 2017年第2期
- Grinding;
- Tooling;
- Thermal damage;
- Optimisation;
19.Experimental investigations on super-smooth polishing of strontium titanate based ceramics substrates

机译：基于钛酸锶锶晶体基材超光滑抛光的实验研究
- 作者：Qiusheng Yan;Xiaobei Cao;Jisheng Pan
- 期刊名称：《International Journal of Abrasive Technology》 | 2017年第1期
- Strontium titanate;
- Ceramic substrate;
- Polishing;
- Surface roughness;
- Material removal rate;
20.Study on the surface micro-topography in pre-stressed dry grinding process

机译：预应力干式研磨过程中表面微型地形研究
- 作者：Yansheng Deng;Xiaoliang Shi;Shichao Xiu;Minghe Liu
- 期刊名称：《International Journal of Abrasive Technology》 | 2017年第2期
- Pre-stressed dry grinding;
- Residual stress;
- Groove depth;
- Pile-up height;
- Surface micro-topography;
- Surface roughness;
21.Study on impacting hardening mechanism and model of pre-stressed hardening grinding

机译：冲压硬化机理及预胁迫硬化研磨模型的研究
- 作者：Xiaoliang Shi;Shichao Xiu
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第3期
- grinding;
- impact;
- hardening;
- pre-stress;
- mechanical-thermal strain;
- plastic strain;
22.Modelling of transient behaviour of roughness reduction in ball end magnetorheological finishing process

机译：粗糙度降低滚珠磁流学精加工过程的瞬态行为建模
- 作者：Faiz Iqbal;Zafar Alam;Sunil Jha
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第3期
- transient;
- roughness;
- nanofinishing;
- magnetorheological;
- smart fluid;
- polishing fluid;
- abrasives;
- carbonyl iron particles;
23.Experimental study on the polishing of aspheric surfaces on an S-136 mould steel using magnetic compound fluid slurries

机译：磁性化合物流体浆料对S-136模钢抛光的实验研究
- 作者：Youliang Wang;Jibo Gao;Ming Feng;Wenjuan Zhang;Xujie Zhang;Yongbo Wu
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第3期
- S-136;
- aspheric surface;
- magnetic compound fluid;
- MCF;
- material removal;
- surface roughness;
24.Experimental investigations into magnetic abrasive flow finishing process on aluminium 6061-T6

机译：铝铝磨削流动整理过程的实验研究6061-T6
- 作者：Pawan Yadav;S.C. Jayswal
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第3期
- magnetic abrasive flow finishing;
- MAFF;
- magnetic abrasive particles;
- MAPs;
- surface finish;
- abrasive flow machining;
- material removal;
25.Process performance and form accuracy of edges on inclined surfaces of parts when processing with radial polymer abrasive brushes

机译：Process performance and form accuracy of edges on inclined surfaces of parts when processing with radial polymer abrasive brushes
- 作者：Dmitry Podashev
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第2期
- Edge rounding;
- Angled surface;
- Polymer abrasive brush;
- Process performance;
- Form accuracy;
26.Simulation of thermal loading on vitreous bonding bridges of vitrified grinding wheel

机译：Simulation of thermal loading on vitreous bonding bridges of vitrified grinding wheel
- 作者：Tyrone Pazmino;Inigo Pombo;Leire GodinoJose A. Sanchez
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第2期
- Vitreous bond;
- Thermal load;
- Numerical simulation;
- Thermal properties;
27.Study on method and experiment for blisk by robotic abrasive belt grinding

机译：Study on method and experiment for blisk by robotic abrasive belt grinding
- 作者：Kangkang Song;Guijian Xiao;Shulin ChenXuetao LiuYun Huang
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第2期
- Aero-engine blisk;
- Robot machining;
- Abrasive belt grinding;
- ABG;
- Grinding quality;
28.Effects of scale differences of microscopic texture of fine particle peened surface on adhesion behaviour of powders

机译：Effects of scale differences of microscopic texture of fine particle peened surface on adhesion behaviour of powders
- 作者：Hikaru Suzumoto;Yutaka Kameyama;Hideaki SatoRyokichi Shimpo
- 期刊名称：《International Journal of Abrasive Technology》 | 2023年第3期
- Shot peening;
- Fine particle peening;
- FPP;
- Powder adhesion;
- Anti-adhesion;
- Powder detachment;
- Surface texture;
- Surface roughness;
- Dimple;
- Centrifugal force;
- Bridge phenomenon;
- Image processing;
29.An investigation on tool wear rate in the electrical discharge face grinding process for the machining of Monel 400

机译：An investigation on tool wear rate in the electrical discharge face grinding process for the machining of Monel 400
- 作者：Akshat Srivastava Kulshrestha;Mandeep Singh;Deepak Rajendra UnuneAshok Kumar Dargar
- 期刊名称：《International Journal of Abrasive Technology》 | 2023年第3期
- Electrical discharge face grinding;
- Tool wear rate;
- TWR;
- Modelling;
- Artificial neural network;
- ANN;
- Response surface methodology;
- RSM;
- Average surface roughness;
- ASR;
30.Verification of deformation of thin mirror by polishing pressure using additive manufacturing

机译：Verification of deformation of thin mirror by polishing pressure using additive manufacturing
- 作者：Daiya Yanagi;Shinya Morita
- 期刊名称：《International Journal of Abrasive Technology》 | 2023年第3期
- Additive manufacturing;
- Magic mirror;
- Magic mirror effect;
- Deformable mirror;
- Polishing pressure;
31.Metal finishing using manual grinding with lamellar sanding wheels as grinding tools

机译：Metal finishing using manual grinding with lamellar sanding wheels as grinding tools
- 作者：Katia Cristiane Gandolpho Candioto;Kauan Costa Silva;Barbara Sabine Linke
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第2期
- Abrasives;
- Finishing process;
- Hand-held grinding;
- Manual tool;
- Surface roughness;
- Lamellar sanding wheel;
- Flap drum;
32.A comparative study of lapping and grinding induced surface/subsurface damage of silicon wafers and corresponding polishing efficiency

机译：A comparative study of lapping and grinding induced surface/subsurface damage of silicon wafers and corresponding polishing efficiency
- 作者：Zhiyuan Li;Shang Gao;Renke KangHonggang LiXiaoguang Guo
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第2期
33.AI-based modelling and optimisation of rotating magnetic force assisted powder mixed EDM

机译：AI-based modelling and optimisation of rotating magnetic force assisted powder mixed EDM
- 作者：Ram Sajeevan;Avanish Kumar Dubey;Ajit Kumar SinghPankaj Kumar Shrivastava
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第1期
- Artificial neural network;
- ANN;
- Genetic algorithm;
- GA;
- Magnetic field assisted EDM;
- Material removal rate;
- MRR;
- Powder mixed EDM;
34.Grinding burn monitoring by high-frequency domain analysis of acoustic emission signal

机译：Grinding burn monitoring by high-frequency domain analysis of acoustic emission signal
- 作者：Hideaki Tanaka;Tokihiko Sugiyama;Takenori Kouno
- 期刊名称：《International Journal of Abrasive Technology》 | 2021年第4期
- Grinding burn;
- Acoustic emission;
- Frequency analysis;
- Stability;
- High frequency domain;
- Robustness;
35.Effect of acidic/alkalinity slurry on titanium alloy CMP performance under different rotation speed condition

机译：Effect of acidic/alkalinity slurry on titanium alloy CMP performance under different rotation speed condition
- 作者：Minghua Pang;Lijie Ma;Jianxiu SuZhankui Wang
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第2期
- chemical mechanical polishing;
- CMP;
- Ti-6Al-4V titanium alloy;
- acidic/alkalinity slurry;
- material removal rate;
- MRR;
- surface roughness;
36.The reuse of alumina for grit blasting preparation of steel surface for thermal spraying

机译：The reuse of alumina for grit blasting preparation of steel surface for thermal spraying
- 作者：Rodolpho F. Vaz;Anderson G. M. Pukasiewicz;Gustavo B. SucharskiIrene B. A. F. SiqueiraSamantha M. Z. OdakeRamon S. C. Paredes
- 期刊名称：《International Journal of Abrasive Technology》 | 2021年第4期
- Alumina;
- Reuse;
- Grit blasting;
- Preparation for coating;
- Adherence of coating;
37.Tangential dressing of diamond grinding wheel by femto-second pulsed laser with Bessel beam

机译：Tangential dressing of diamond grinding wheel by femto-second pulsed laser with Bessel beam
- 作者：Jiabin Zhou;Dongkai Chu;Peng YaoXiyong JinLianjun ZhaoYueming LiShitong LiangJimiao XuShuoshuo QuChuanzhen Huang
- 期刊名称：《International Journal of Abrasive Technology》 | 2023年第3期
38.Grinding acoustic emission features in relation to abrasive scratch characteristics

机译：Grinding acoustic emission features in relation to abrasive scratch characteristics
- 作者：Eustaquio García Plaza;Xun Chen;Lounis Ait Ouarab
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第2期
- grinding;
- acoustic emission;
- monitoring;
- time direct analysis;
- TDA;
- fast Fourier transform;
- FFT;
- singular spectrum analysis;
- SSA;
39.Grinding parameters optimisation of white marble using response surface methodology integrated with NSGA-II algorithm approach

机译：Grinding parameters optimisation of white marble using response surface methodology integrated with NSGA-II algorithm approach
- 作者：Fangchen Yin;Hongyuan Zhang;Changcai CuiGuoqin Huang
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第1期
40.Development of wireless cutting vibration monitoring device fixed to tool holder

机译：Development of wireless cutting vibration monitoring device fixed to tool holder
- 作者：Kazuya Kato;Koji Utsumi;Kenji NishikawaAmi Nomura
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第1期
- Internet of things;
- IoT;
- Cutting vibration;
- Accelerometer;
- Endmill;
- Tool holder;
41.Derivation of optimum abrasive for improving magnetic polishing rate for hybrid metal AM titanium alloy and creating a polishing prediction model

机译：Derivation of optimum abrasive for improving magnetic polishing rate for hybrid metal AM titanium alloy and creating a polishing prediction model
- 作者：Takamasa Hirano;Tatsuya Furuki;Hiroyuki Kousaka
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第2期
- magnetic polishing;
- abrasive paste;
- metal additive manufacturing;
- machining centre;
- Ti-6Al-4V;
- Preston constant;
42.Temperature measurement using single-pole grindable thermocouple during grinding Ti-6Al-4V

机译：Temperature measurement using single-pole grindable thermocouple during grinding Ti-6Al-4V
- 作者：Yujun Wu;Atsushi Iwasaki;Hisanobu KawashimaWeimin Lin
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第1期
- Ti-6Al-4V;
- Single-pole grindable thermocouple;
- Cutting temperature;
- Grinding parameter;
- Background temperature;
43.Study on cutting forces in zero-cutting after complete stop of feed motion when face milling of alloy 718

机译：Study on cutting forces in zero-cutting after complete stop of feed motion when face milling of alloy 718
- 作者：Shinpei Tanaka;Ryutaro Tanaka;Katsuhiko SekiyaKeiji Yamada
- 期刊名称：《International Journal of Abrasive Technology》 | 2023年第3期
- Intermittent cutting;
- Feed motion;
- Uncut chip thickness;
- Cutting force;
- Zero-cutting;
- Elastic deformation;
- Friction characteristic;
- Coefficient of friction;
44.Mechanical characteristics of abrasive composite materials characterised by the impulse excitation technique

机译：Mechanical characteristics of abrasive composite materials characterised by the impulse excitation technique
- 作者：Katia Cristiane Gandolpho Candioto;Matheus de Mendonca Chitan
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第1期
- Abrasives;
- Composite materials;
- Impulse excitation technique;
- IET;
- Non-destructive testing;
- Young's modulus;
- Damping;
45.Cutting force and wear behaviour of a brazed diamond trepanning bit when drilling granite

机译：Cutting force and wear behaviour of a brazed diamond trepanning bit when drilling granite
- 作者：Baojun Sun;Chengjie Jiang;Fule Zong
- 期刊名称：《International Journal of Abrasive Technology》 | 2021年第4期
- Diamond trepanning bit;
- Cutting force;
- Torque;
- Wear behaviour;
- Service life;
46.Water dissolution polishing for potassium dihydrogen phosphate crystal without abrasive using sol-gel tool

机译：Water dissolution polishing for potassium dihydrogen phosphate crystal without abrasive using sol-gel tool
- 作者：Yun Shen;Jing Lu;Xiaobin Lv
- 期刊名称：《International Journal of Abrasive Technology》 | 2022年第2期
- Sol-gel tool;
- KDP crystal;
- Water dissolution;
- Polishing;
- Non-abrasive;
- Surface roughness;
47.Control of hydrophobic and hydrophilic characteristics of metallic materials using shot blasting

机译：Control of hydrophobic and hydrophilic characteristics of metallic materials using shot blasting
- 作者：Fumiya Sano;Koichiro Nambu;Yusuke UchiumiMasahiro Okumiya
- 期刊名称：《International Journal of Abrasive Technology》 | 2020年第2期
- wettability;
- shot blasting;
- contact angle;
- surface roughness;
- texturing;
48.Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al_2O_3 abrasives

机译：Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al_2O_3 abrasives
- 作者：Subhadip Pradhan;Sushreesudha Sahu;Sudhansu Ranjan DasDebabrata Dhupal
- 期刊名称：《International Journal of Abrasive Technology》 | 2021年第4期
- K-80 ceramic;
- Aluminium oxide;
- FB-HAJM;
- Material removal rate;
- MRR;
- Depth of cut;
- DOC;
- Over-cut;
- Displacement;
- Simulation;
- Scanning electron microscope;
- SEM;
- Particle swarm optimisation;
- PSO;
49.Investigation of polishing mechanism of nanofibre buffing pad manufactured with modified melt blowing method

机译：Investigation of polishing mechanism of nanofibre buffing pad manufactured with modified melt blowing method
- 作者：Wei Wu;Eiichi Aoyama;Toshiki HirogakiHiroyoshi Sota
- 期刊名称：《International Journal of Abrasive Technology》 | 2021年第4期
- Melt-blowing method;
- Nanofibre;
- Oil adsorption;
- Non-woven polypropylene nanofibre;
- Buffing;
- Buffing pad;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号