首页>外文期刊>Science and Engineering of Composite Materials

Science and Engineering of Composite Materials

SCIEI

中文名称：复合材料科学与工程

ISSN：0792-1233
出版周期：Bimonthly

发文量：751

期刊论文

热门论文

年度选择

2020
- 第1期
2019
- 第1期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2017
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2016
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2015
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2014
- 第1期
- 第2期
- 第3期
- 第4期
2013
- 第1期
- 第2期
- 第3期
- 第4期
2012
- 第1期
- 第2期
- 第3期
- 第4期
2011
- 第2期
- 第3期
- 第4期
2010
- 第1期
- 第2期
- 第3期
- 第4期
2005
- 第2期
2004
- 第3期

更多>>

全选（0）

1.Fabrication and mechanical properties of ultrafine structured dissimilar laminated metal composite sheets (LMCS)

机译：超细结构异种层压金属复合板（LMCS）的制备和力学性能
- 作者：Zejun Chen;Quanzhong Chen;Qing Liu;Zheng Zhou;Guojun Wang
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- accumulative roll bonding (ARB)laminated metal composite sheet (LMCS)mechanical propertyultrafine structure;
2.Stress concentration around a central hole as affected by material nonlinearity in fibrous composite laminated plates subject to in-plane loading

机译：受平面内载荷作用的纤维复合层压板中材料非线性影响的中心孔周围应力集中
- 作者：Ghazi A. Abu-Farsakh;Amin H. Almasri;Dana H. Qa’dan
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- circular holecomposite materialfinite element methodlaminatematerial nonlinearityplate;
3.Microstructural and mechanical properties of Cu-7vol.%ZrB ₂ alloy produced by powder metallurgy techniques

机译：粉末冶金技术生产的Cu-7vol。％ZrB _{2 合金的组织和力学性能}
- 作者：Jovana Ru?i?;Jelena Sta?i?;Viseslava Rajkovi?;Karlo Rai?;Du?an Bo?i?
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第6期
- compressive propertiesCu-ZrB2 alloyhot pressing processmacro hardnessmechanical alloying;
4.Frontmatter

机译：前垫
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第6期
5.Degradation of basalt FRP bars in alkaline environment

机译：碱性环境下玄武岩玻璃钢条的降解
- 作者：Gang Wu;Xin Wang;Zhishen Wu;Zhiqiang Dong;Qiong Xie
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第6期
- alkaline environmentbasalt FRPmoistureshear strengthtensile strength;
6.Evaluation of new GFRTP and CFRTP using epsilon caprolactam as matrix fabricated with VaRTM

机译：使用ε-己内酰胺作为VaRTM制备的基质评估新的GFRTP和CFRTP
- 作者：Goichi Ben;Akiko Hirabayashi;Kazuhiro Sakata;Koichi Nakamura;Norio Hirayama
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第6期
- carbon fabricε-caprolactamFRTPGF textilemechanical propertiesVaRTM;
7.A new method for preparation of low melting point polyamide-6 (LPA6) and properties of compatibilized blends of LPA6/glass beads/styrene and maleic anhydride copolymer

机译：一种制备低熔点聚酰胺6（LPA6）的新方法以及LPA6 /玻璃珠/苯乙烯与马来酸酐共聚物的相容混合物的性能
- 作者：Min Zhang;Shengjun Lu;Enhui Xu;Min He;Jie Yu
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第6期
- glass beadsinterfacelow melting point PA6propertiesSMA;
8.Investigation of the effect of microstructural parameters on the initial yield surface of non-isothermal composites

机译：微观结构参数对非等温复合材料初始屈服面的影响研究
- 作者：Junjie Ye;Yuanying Qiu;Zhi Zhai;Xuefeng Chen;Yuchen Fan
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第6期
- compositeshigh-fidelity generalized method of cellsinitial yield surfacenon-isothermal.;
9.Effect of the amount of SiC, number of strokes, and applied load on the reciprocating wear behavior of Al-SiC composites

机译：SiC含量，行程数和施加载荷对Al-SiC复合材料往复磨损行为的影响
- 作者：Jayakumar Lakshmipathy;Balamurugan Kulendran
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第5期
- Al-SiC compositescastingelectronmetal-matrix composites (MMCs)microscopywear;
10.Preparation of optimal feedstock for low-pressure injection molding of Al/SiC nanocomposite

机译：Al / SiC纳米复合材料低压注射成型的最佳原料的制备
- 作者：Arezoo Ghanbari;Masoud Alizadeh;Ebrahim Ghasemi;Rahim Yazdani Rad;Somaye Ghaffari
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第5期
- Al/SiCinjection moldingmoldability indexnanocompositesrheology;
11.Investigation of the joining characteristics of Al-B ₄C composites manufactured by friction welding

机译：摩擦焊接制备的Al-B _{4 C复合材料的结合特性研究}
- 作者：Ayhan Orhan
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第4期
- Al/B4Cfriction weldingmicrohardnessmicrostructureshear-lap test;
12.Morphological and mechanical properties of chemically treated municipal solid waste (MSW)/banana fiber and their reinforcement in polymer composites

机译：化学处理的城市垃圾（香蕉）/香蕉纤维的形态和力学性能及其在聚合物复合材料中的增强作用
- 作者：John Joseph Raj Ronald Aseer;Krishnasamy Sankaranarayanasamy;Perumalsamy Jayabalan;Ramakrishna Natarajan;Keereyadath Priya Dasan
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第4期
- chemical treatmentmunicipal solid wastevolume fraction;
13.Melt grafting copolymerization of glycidyl methacrylate onto acrylonitrile-butadiene-styrene (ABS) terpolymer

机译：甲基丙烯酸缩水甘油酯在丙烯腈-丁二烯-苯乙烯（ABS）三元共聚物上的熔融接枝共聚
- 作者：Huiju Shao;Shuhao Qin;Jianbing Guo;Bin Wu
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第4期
- ABSfunctionalizationglycidyl methacrylategrafting copolymerization;
14.Compressibility and solid-state sintering behavior of W-Cu composite powders

机译：钨铜复合粉末的压缩性和固态烧结行为
- 作者：Mohammad Ardestani;Mohsen Rafiei;Sina Salehian;Mohammad Reza Raoufi;Mohammad Zakeri
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第3期
- compactionsinterabilityW-Cu composite powders;
15.Assessment of nano-TiO ₂ and class F fly ash effects on flexural fracture and microstructure of binary blended concrete

机译：纳米TiO _{2 和F级粉煤灰对二元混合混凝土弯曲断裂和微观结构的影响评估。}
- 作者：Mostafa Jalal;Mostafa Tahmasebi
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第3期
- binary blended concreteclass F fly ashflexural fracturemicrostructuretitanium dioxide nanopowder;
16.Research on design rules for composite laminate

机译：复合材料层压板设计规则研究
- 作者：Gong-Dong Wang;Jun Wang;Sayed K.M. Hossain;Hao Chen
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第3期
- composite laminatedesign rulegenetic algorithmlamination parameters;
17.Production and wear property of electroless Ni-plated B ₄C-AstaloyCr-M composites

机译：化学镀镍B _{4 C-AstaloyCr-M复合材料的生产及磨损性能}
- 作者：Ahmet Yonetken;?ükrü Tala?;Ayhan Erol;?mer G?ko?lan;Taner Mersin
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第3期
- ceramic-metal compositeselectroless nickel platingpowder metallurgy;
18.Use of glass waste as mineral filler in hot mix asphalt

机译：将玻璃废料用作热拌沥青中的矿物填料
- 作者：Mehmet Saltan;Betül ?ksüz;Volkan Emre Uz
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第3期
- glass wastehot mix asphaltMarshall stability testmineral filler;
19.Size-dependent behavior of laminates with curvilinear fibers made by automated fiber placement

机译：通过自动放置纤维制成的曲线纤维层压板的尺寸依赖性
- 作者：Mahdi Arian Nik;Larry Lessard;Damiano Pasini
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第2期
- automated fiber placementfiber path curvaturegaps and overlapsmulti-objective optimizationsize-dependent;
20.Effect of Ce ₂O ₃ on microstructures and oxidation resistance of laser melting deposited composites on a Ti alloy

机译：Ce _{2 O _{3 对Ti合金上激光熔敷沉积复合材料的组织和抗氧化性能的影响}}
- 作者：Peng Li
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- compositeslasersnanomaterialsoxidation resistance;
21.Dynamics of a generally layered composite beam with single delamination based on the shear deformation theory

机译：基于剪切变形理论的整体分层单层组合梁的动力学。
- 作者：Ramazan-Ali Jafari-Talookolaei;Maryam Abedi;Mohammad H. Kargarnovin;Mohammad T. Ahmadian
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- finite element methodgenerally laminated composite beammaterial couplingsPoisson effectTimoshenko beam;
22.Investigation of experimental study of end milling of CFRP composite

机译：CFRP复合材料立铣的实验研究
- 作者：Erol Kili?kap;Ahmet Yardimeden;Yahya H??man ?elik
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- CFRPcutting forcedelaminationend millingsurface roughness;
23.Preparation of graphene and inclusion in composites with poly(styrene- b-butadiene- b-styrene)

机译：石墨烯的制备及其与聚（苯乙烯- b -丁二烯- b -苯乙烯的复合材料中的包裹体）
- 作者：Michael Czajka;Robert A. Shanks;Ing Kong
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- block copolymerelastomergraphenegraphiteintercalation;
24.Soft computing techniques for compressive strength prediction of concrete cylinders strengthened by CFRP composites

机译：CFRP增强混凝土圆柱抗压强度的软计算技术。
- 作者：Mostafa Jalal
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- ANFISartificial neural networkCFRP compositescompressive strengthconcretegenetic programmingmultiple regressionsoft computing;
25.Investigations on interface microstructure and strength properties of dissimilar tin bronze/superalloy diffusion bonded joints

机译：锡青铜/高温合金扩散连接接头的界面组织和强度性能研究
- 作者：Peng Li;Jinglong Li;Jiangtao Xiong;Fusheng Zhang;Li Liang
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第5期
- diffusion bondingdissimilar jointinterface microstructureinterlayerpenetration structure;
26.Damage behavior of potting materials in sandwich composites with pinned joints

机译：销钉夹层复合材料中灌封材料的破坏行为
- 作者：Cesim Atas;Alper Basmaci
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第5期
- damageexperimentalmechanical jointpotting materialsandwich composite;
27.Development and characterization of bronze-Cr-Ni composites produced by powder metallurgy

机译：粉末冶金生产的青铜-Cr-Ni复合材料的研制与表征
- 作者：Aykut Canakci;Temel Varol;Hamdullah Cuvalci;Fatih Erdemir;Serdar Ozkaya
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第4期
- compositeselectrical conductivityelectrical contact materialspowder metallurgy;
28.Antioxidant modification of C/C composites by in situ hydrothermally synthesized 4ZnO·B ₂O ₃·H ₂O

机译：原位水热合成4ZnO·B _{2 O _{3 ·H _{2 O对C / C复合材料的抗氧化改性}}}
- 作者：Liu-Qing Yang;Jian-Feng Huang;He-Jun Li;Li-Yun Cao;Jie Fei;Hai-Bo Ouyang;Jian-Peng Wu;Wei Hao
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第4期
- antioxidant modificationC/C compositeshydrothermal treatmentzinc borate;
29.Mechanical behavior of walnut ( Juglans L.) shell particles reinforced bio-composite

机译：核桃壳颗粒增强生物复合材料的力学行为（ Juglans L。）
- 作者：Vinay K. Singh
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第4期
- composite materialenvironmentpolymerwalnut particles;
30.Structure-property responses of bio-inspired synthetic foams at low and high strain rates

机译：低和高应变速率下生物启发的合成泡沫的结构特性响应
- 作者：Hongjoo Rhee;Matthew T. Tucker;Wilburn R. Whittington;Mark F. Horstemeyer;Hyeona Lim
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第4期
- aluminum foamslow and high strain rate mechanical responsestructure-property relationsturtle shell;
31.Analytical and experimental investigation of tensile properties of cross-ply and angle-ply GFRP composite laminates

机译：交叉和角向玻璃纤维增强复合材料层压板的拉伸性能的分析和实验研究
- 作者：Mostefa Bourchak;Wail Harasani
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第3期
- classical laminate theory (CLT)GFRP compositenetting analysis10 ruletensile properties;
32.Individual humeral head replacement by C/C composite implants coated with hydroxyapatite via rotation plasma spraying

机译：通过旋转等离子喷涂，用涂有羟基磷灰石的C / C复合材料植入物单独置换肱骨头
- 作者：Zhong Ping;Ni Xin-ye;Miao Yun-liang;Lin Tao;Xiong Xin-bo;Zhou Dong
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第3期
- C/C compositehydroxyapatiterotation plasma spraying;
33.Frontmatter

机译：前垫
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第2期
34.Design and automated manufacturing of profiled composite driveshafts

机译：异型复合材料传动轴的设计和自动化制造
- 作者：Maik Gude;Florian Lenz;Andreas Gruhl;Bernhard Witschel;Andreas Ulbricht;Werner Hufenbach
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第2期
- braidingcomposite driveshaftcontinuous manufacturingprofiled cross-sectiontextile pattern;
35.Study on preparation and humidity-control performance of organobentonite/sodium polyacrylate composite material

机译：有机膨润土/聚丙烯酸钠复合材料的制备及调湿性能研究
- 作者：Min Li
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- air humiditycomposite materialhumidity controlperformancepreparation;
36.Vibration of functionally graded carbon nanotube-reinforced composite plates under a moving load

机译：功能梯度的碳纳米管增强复合板在运动载荷下的振动
- 作者：Parviz Malekzadeh;Mojtaba Dehbozorgi;Seyyed Majid Monajjemzadeh
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- carbon nanotubesfunctionally graded materialsmoving loadreinforced composite plates;
37.Frontmatter

机译：前垫
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
38.Influence of cutting parameters during drilling of filled glass fabric-reinforced epoxy composites

机译：切削参数对填充玻璃纤维增强环氧复合材料钻孔的影响
- 作者：Murugesh Mudegowdar
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第1期
- delamination factordrillingfillersglass fabric-reinforced polymer (GFRP)speedsurface roughnessthrust force;
39.Experimental study on the mechanical properties of an epoxy-based nanocomposite using polymeric alloying and different nano-reinforcements: nanofiber, nanolayered and nanoparticulate materials

机译：使用聚合合金和不同的纳米增强材料（包括纳米纤维，纳米层和纳米颗粒材料）的基于环氧的纳米复合材料的力学性能的实验研究
- 作者：Yasser Rostamiyan;Abdolhossein Fereidoon;Amin Hamed Mashhadzadeh
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第6期
- clayepoxyHIPSMWCNTsilica;
40.Energy absorption rate of composite tube as a function of stacking sequence using finite element method

机译：复合管能量吸收率随堆积顺序的有限元分析
- 作者：Ramin Amid;Zouheir Fawaz;Hamid Ghaemi
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第6期
- compositesenergy absorptionnumerical simulationsrate effectstacking sequence;
41.The effect of zeolite particle modified by PEG on rubber composite properties

机译：PEG改性沸石颗粒对橡胶复合性能的影响。
- 作者：Qinghong Fang;Xiaochen Liu;Na Wang;Chi Ma;Feng Yang
- 期刊名称：《Science and Engineering of Composite Materials》 | 2015年第6期
- compositePEG modificationpreparationrubberzeolite;
42.The mechanical behaviour of adhesively bonded composite joints under repeated axial impacts at different temperatures

机译：在不同温度下反复轴向冲击下胶粘复合接头的力学行为
- 作者：Ugur Kemiklioglu;Onur Sayman;Ibrahim F. Soykok;Tarkan Akderya;Resit Dere
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第6期
- adhesiondamage mechanicsfibre/matrix bondglass fibresmechanical properties;
43.Sustained release of OIC-A006 from PLGA microspheres to induce osteogenesis of composite PLGA/β-TCP scaffolds

机译：OIC-A006从PLGA微球中持续释放以诱导复合PLGA /β-TCP支架的成骨
- 作者：Liulan Lin;Yangyang Dong;Qi Zhou
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第5期
- bone repair materialscontrolled drug releasedrug-loaded microspheresfreeze-drying technologyOIC-A006;
44.Effects of surface grafting of copper nanoparticles on the tensile and bonding properties of flax fibers

机译：铜纳米粒子表面接枝对亚麻纤维拉伸和粘结性能的影响
- 作者：Zajna Sherief;Guijun Xian;Sabu Thomas;Anu Ajith
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第5期
- epoxyflax fibernanocompositenanoparticle;
45.Tribological properties and microstructures of Al₂O₃-TiC-TiB₂ reinforced composites

机译：Al _{2 O _{3 -TiC-TiB _{2 增强复合材料的摩擦学性能和微观结构}}}
- 作者：Peng Li
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第5期
- coatingscompositeslaserswearzirconia;
46.Effects of precure cycle on tensile and dynamical mechanical properties of carbon/benzoxazine laminates

机译：预固化周期对碳/苯并恶嗪层压板拉伸和动态力学性能的影响
- 作者：Yalin Yu;Jinrui Ye;Boming Zhang;Guocheng Qi
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
- mechanical propertiespolymer-matrix compositesprecure degreevoids;
47.Surface modification of polyimide fibers by oxygen plasma treatment and interfacial adhesion behavior of a polyimide fiber/epoxy composite

机译：氧等离子体处理聚酰亚胺纤维的表面改性及聚酰亚胺纤维/环氧树脂复合材料的界面粘合行为
- 作者：Xuyang Sun;Junfeng Bu;Weiwei Liu;Hongqing Niu;Shengli Qi;Guofeng Tian;Dezhen Wu
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
- oxygen plasma treatmentpolyimide fiberssurface energysurface modification;
48.Design and analysis of a complementary split ring resonator (CSRR) metamaterial based antenna for wideband application

机译：宽带应用中基于互补裂环谐振器（CSRR）超材料的天线的设计与分析
- 作者：Sikder Sunbeam Islam;Touhidul Alam;Mohammad Rashed Iqbal Faruque;Mohammad Tariqul Islam
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
- antennacompactCSRRdouble-negative metamaterialwideband;
49.One-step preparation and characterization of core-shell SiO ₂/Ag composite spheres by pulse plating

机译：脉冲镀膜一步法制备核壳SiO _{2 / Ag复合球}
- 作者：Li Xiong;Xiangping Huang;Ya Liu;Liqing Pan
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- photoluminescencepulse platingSERSSiO2/Ag core-shell spheres;
50.A thermal-plastic model of friction stir welding in aluminum alloy

机译：铝合金摩擦搅拌焊的热塑模型
- 作者：Zhang Peilei;Yan Hua;Li Chonggui;Yu Zhishui;Lu Qinghua
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- friction stir weldingplastic deformation heatthermal model;
51.Nano-SiC _p/Al2014 composites with high strength and good ductility

机译：高强度高延展性的纳米SiC _{p / Al2014复合材料}
- 作者：Long-Jiang Zhang;Feng Qiu;Jin-Guo Wang;Qi-Chuan Jiang
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- compositesnano-SiC particlessemi-solid stirring combined with extrusion;
52.Buckling and layer failure of composite laminated cylinders subjected to hydrostatic pressure

机译：承受静水压力的复合叠层圆柱的屈曲和层破坏
- 作者：Ke Chun Shen;Guang Pan;JiangFeng Lu
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- bucklingcomposite cylinderhydrostatic pressurelayer failure;
53.A model for longitudinal tensile strength prediction of low braiding angle three-dimensional and four-directional composites

机译：低编织角三维四向复合材料纵向拉伸强度预测模型
- 作者：Yuan Hui;Wen Weidong;Wang Yi;Zheng Zhenshan;Wu Xiong
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- braided compositesdamage analysissize effectstrength;
54.Graphene/poly(vinylidene fluoride) dielectric composites with polydopamine as interface layers

机译：以聚多巴胺为界面层的石墨烯/聚偏二氟乙烯介电复合材料
- 作者：Hairong Li;Chenglong Xu;Zongyi Chen;Ming Jiang;Chuanxi Xiong
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- dielectric propertiesgrapheneinterfacespolydopamine;
55.Preparation and fluid drag reduction properties of superhydrophobic paper-based films comprising carbon nanotubes and fluoropolymers

机译：包含碳纳米管和含氟聚合物的超疏水纸基薄膜的制备和降低流体阻力的性能
- 作者：Weiwei Ma;Zhiping Zhou;Ping Li
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- CNTsfluid drag reductionslip lengthsuperhydrophobic filmssurface energy;
56.Effects of bottom ash and granulated blast furnace slag as fine aggregate on abrasion resistance of concrete

机译：底灰和高炉矿渣细骨料对混凝土耐磨性的影响
- 作者：Turhan Bilir;Isa Yüksel;Ilker Bekir Topcu;Osman Gencel
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- abrasion resistanceblast-furnace slagbottom ashconcretedurability;
57.Metal-matrix composite fabricated with gas tungsten arc melt injection and precoated with NiCrBSi alloy to increase the volume fraction of WC particles

机译：气体钨极电弧熔体注射法制备的金属基复合材料，并预涂NiCrBSi合金以增加WC颗粒的体积分数
- 作者：Aiguo Liu;Da Li;Fanling Meng;Huanhuan Sun
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- gas tungsten arc melt injectionmetal-matrix compositeNiCrBSi alloy coatingvolume fractionWC particle;
58.Studies on the structural, thermal, and dielectric properties of fabricated Nylon 6,9/CaCu ₃Ti ₄O ₁₂ nanocomposites

机译：尼龙6,9 / CaCu _{3 Ti _{4 O _{12 纳米复合材料的结构，热学和介电性能研究}}}
- 作者：Ramaswami Sachidanandan Ernest Ravindran;Paramanandam Thomas;Sahadevan Renganathan
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- electrical propertiesnano-CCTOnanocompositesNylon 6,9;
59.Optical properties and photocatalytic activity of CdS-TiO ₂/graphite composite

机译：CdS-TiO _{2 /石墨复合材料的光学性能和光催化活性}
- 作者：Fitria Rahmawati;Rini Wulandari;Eti Nofaris;Mudjijono
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- CdS-TiO2/graphite compositegraphite substrateoptical propertiesphotocatalytic;
60.Effects of multiwalled carbon nanotube mass fraction on microstructures and electrical resistivity of polycarbonate-based conductive composites

机译：碳纳米管多壁质量分数对聚碳酸酯基导电复合材料微观结构和电阻率的影响
- 作者：Lijun Wang;Jianhui Qiu;Eiichi Sakai;Xiaowei Wei
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- carbon nanotubeselectrical resistivityinjection conditionmicrostructurepolycarbonate;
61.Improved hydration resistance of magnesia by EDTA and ammonium phosphate as additives

机译：EDTA和磷酸铵作为添加剂改善氧化镁的抗水合作用
- 作者：Wenzheng Zhang;Bin Chen;Jiangnan Mou;Danyang Wang
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第1期
- ammonium phosphateEDTAhydrationmagnesia;
62.Nanoscale investigation of polymer cement concretes by small angle neutron scattering

机译：小角度中子散射对聚合物水泥混凝土的纳米研究
- 作者：Massimo Rogante;Irina K. Domanskaya;Ekaterina S. Gerasimova;Adél Len;László Rosta;Noémi K. Székely;Elena Vladimirova
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第1期
- cement stonesindustrial applicationspolymer cement concretesporositySANS;
63.Finite element analysis of mechanical properties of woven composites through a micromechanics model

机译：通过微力学模型对机织复合材料力学性能的有限元分析
- 作者：Haris A. Khan;Abid Hassan;M.B. Saeed;Farrukh Mazhar;Imran A. Chaudhary
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第1期
- finite element analysis (FEA)mechanical propertiesmicroscale modelingplain weavetextile composites;
64.Design of a compact UWB antenna with a partial ground plane on epoxy woven glass material

机译：设计紧凑的UWB天线，在环氧树脂编织玻璃材料上具有部分接地平面
- 作者：Md. Moinul Islam;Mohammad Tariqul Islam;Mohammad Rashed Iqbal Faruque;Rabah W. Aldhaheri;Md. Samsuzzaman
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第1期
- dielectric materialmicrostrip linepartial groundUWB;
65.Free vibration analysis of symmetrically laminated composite circular plates with curvilinear fibers

机译：曲线纤维复合材料对称叠合圆板的自由振动分析
- 作者：Ahmed Guenanou;Abderrahim Houmat
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第1期
- curved hierarchical square finite elementcurvilinear fiberfirst-order shear deformation theoryfree vibrationlaminated composite circular plate;
66.The effects of thermal residual stresses and interfacial properties on the transverse behaviors of fiber composites with different microstructures

机译：热残余应力和界面性质对不同微结构纤维复合材料横向性能的影响
- 作者：Xiaojun Zhu;Xuefeng Chen;Zhi Zhai;Zhibo Yang;Qiang Chen
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第1期
- compositeinterfacemicromechanical modelstress concentration factorthermal residual stresses;
67.Study on the impact of Fe ₂P phase on the electrochemical performance of LiFePO ₄

机译：Fe _{2 相对LiFePO _{4 电化学性能的影响}}
- 作者：Yuan Ma;Dajun Liu
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第1期
- electrochemical performancesiron phosphidelithium iron phosphatemagnetic separation method;
68.Frontmatter

机译：前垫
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第1期
69.Frontmatter

机译：前垫
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第6期
70.Surface modification on dispersion and enhancement of PVA fibers in fiber-reinforced cementitious composites

机译：纤维增强水泥基复合材料中PVA纤维分散和增强的表面改性
- 作者：Lin Shui-dong;Li Li
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第6期
- cement-based compositedispersionpoly(vinyl alcohol) fibersurface modification;
71.Cell wall material strain hardening on dynamic responses of closed-cell foams

机译：孔壁材料应变硬化对闭孔泡沫动态响应的影响
- 作者：Jianjun Zhang;Zhihua Wang;Longmao Zhao
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第6期
- cellular materialimpact loadingstrain hardening convergence3D Voronoi;
72.Bond performance of basalt fiber-reinforced polymer bars in conventional Portland cement concrete: a relative comparison with steel rebar using the hinged beam approach

机译：玄武岩纤维增强聚合物棒在常规波特兰水泥混凝土中的粘结性能：使用铰接梁法与钢筋的相对比较
- 作者：Muhammet Seis;Ahmet Beycio?lu
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第6期
- basalt fiber-reinforced polymer (BFRP) barbond behaviorconventional Portland cement concretehinged beam;
73.Crystallization, structural and mechanical properties of PA6/PC/NBR ternary blends: effect of NBR-g-GMA compatibilizer and organoclay

机译：PA6 / PC / NBR三元共混物的结晶，结构和机械性能：NBR-g-GMA增容剂和有机粘土的作用
- 作者：Masoumeh Delkash;Ghasem Naderi;Razi Sahraieyan;Elnaz Esmizadeh
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第5期
- compatibilizationcrystallizationmechanical propertiespolyamide 6ternary nanocomposites;
74.Failure analysis and strengthening mechanism of Z-pinned composite T-joints under tensile loading

机译：Z型钉复合T型接头在拉伸载荷下的失效分析及强化机理
- 作者：Yan Tan;Yong Li;Dajun Huan;Xiangyang Zhang;Qiyi Chu
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第5期
- bridgingcompositesnubbingT-jointsZ-pinning;
75.Study the effect of fiber loading and alkali treatment on the mechanical and water absorption properties of wheat straw fiber-reinforced epoxy composites

机译：研究纤维负载和碱处理对麦草纤维增强环氧复合材料的机械和吸水性能的影响
- 作者：Varun Mittal;Shishir Sinha
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第5期
- compositesepoxy resinmechanical propertieswater absorptionwheat straw;
76.Sintering temperature-microstructure-property relationships of alumina matrix composites with silicon carbide and silica additives

机译：碳化硅和二氧化硅添加剂对氧化铝基复合材料烧结温度-微观结构-性能的影响
- 作者：Apichart Limpichaipanit;Sukanda Jiansirisomboon;Tawee Tunkasiri
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
- ceramicscompositefracturemechanical properties;
77.The influence of microstructure geometry on the scale effect in mechanical behaviour of heterogeneous materials

机译：微结构几何形状对异质材料力学行为中尺度效应的影响
- 作者：Adrian Ró?ański;Magdalena Rajczakowska;Andrzej Serwicki
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
- compositecomputed tomographymicrostructurescale effectuniaxial compression;
78.Studying the nonlinear properties and strain-rate sensitivity of SiC short fiber-reinforced Al matrix composites

机译：SiC短纤维增强Al基复合材料的非线性特性和应变率敏感性研究
- 作者：Junjie Ye;Yuanying Qiu;Yumin He;Juan Ma;Xinglong Zhang;Changlong Huang
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
- nonlinearresidual stressshort fiber-reinforced compositesstrain ratetheory frameworkthermal;
79.A study of the effect of chemical treatments on areca fiber reinforced polypropylene composite properties

机译：化学处理对槟榔纤维增强聚丙烯复合材料性能的影响研究
- 作者：Sampathkumar Dhanalakshmi;Punyamoorthy Ramadevi;Bennehalli Basavaraju
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
- areca fiberschemical treatmentscomposite propertiespolypropyleneSEM image analysis;
80.The failure mechanism of carbon fiber-reinforced composites under longitudinal compression considering the interface

机译：考虑界面的碳纤维增强复合材料纵向压缩破坏机理
- 作者：Geng Han;Zhidong Guan;Xing Li;Ruipeng Ji;Shanyi Du
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- FEMinterfacekink bandlongitudinal compressionunidirectional composite;
81.Design and multibody dynamics analyses of the novel force-bearing structures for variable configuration spacecraft

机译：新型可变构型航天器受力结构的设计和多体动力学分析
- 作者：Xin Ning;Lin Tang;Junwei Gu;Chaobo Liang;Xiaokui Yue;Jianping Yuan
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- force-bearing structuresmechanical propertiesmultibody dynamics analysisvariable configuration spacecraft (VCS);
82.Numerical simulation of strain rate effect on the inelastic behavior of metal matrix composites

机译：应变速率对金属基复合材料非弹性行为影响的数值模拟
- 作者：Qiang Chen;Zhi Zhai;Xiaojun Zhu;Caibin Xu;Xuefeng Chen
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- finite-volume theorymetal matrix compositesmicromechanicsviscoplasticity;
83.Surface modification of diamond and its effect on the mechanical properties of diamond/epoxy composites

机译：金刚石的表面改性及其对金刚石/环氧树脂复合材料力学性能的影响
- 作者：Junsha Wang;Long Wan;Suye Hao;Jing Chen
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- diamondinterfacepolymer-matrix compositessurface modification;
84.The effect of hydroxyapatite reinforcement and preparation methods on the structure and mechanical properties of Mg-HA composites

机译：羟基磷灰石增强剂及其制备方法对Mg-HA复合材料结构和力学性能的影响
- 作者：Ji?í Kubásek;Dalibor Vojtěch;Jaroslav Maixner;Drahomír Dvorsky
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- compositeshydroxyapatitemagnesiummechanical properties;
85.The superior ductility of fine SiC _p/Al2014 composites after extrusion

机译：SiC _{p / Al2014复合材料在挤压后的优异延展性}
- 作者：Long-Jiang Zhang;Feng Qiu;Jin-Guo Wang;Qi-Chuan Jiang
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- hot extrusionmicrostructuresSiC/Al compositestensile properties;
86.Electromechanical characterization of multilayer graphene-reinforced cellulose composite containing 1-ethyl-3-methylimidazolium diethylphosphonate ionic liquid

机译：含1-乙基-3-甲基咪唑二乙基膦酸酯离子液体的多层石墨烯增强纤维素复合材料的机电特性
- 作者：Emine Akar;Yolda? Seki;Okan ?zdemir;?brahim ?en;Mehmet Sar?kanat;Bar?? O?uz Gürses;?zgün Cem Y?lmaz;Levent ?etin;Kutlay Sever
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第2期
- celluloseelectromechanical propertiesionic liquidmultilayer graphene;
87.Tensile strength of Z-pinned laminates in RTD and hot-wet environment

机译：RTD和热湿环境下Z钉层压板的拉伸强度
- 作者：Chenghu Li;Wei Guo;Zhe Wu
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第1期
- FEAhot-wettensile strengthZ-pin;
88.Synthesis of poly(methylcarbazole) and its nanoclay and nanozinc composites and corrosion protection performances on stainless steel Type 304

机译：聚甲基咔唑及其纳米粘土和纳米锌复合材料的合成及对304型不锈钢的腐蚀防护性能
- 作者：Murat Ates
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第6期
- corrosion protectionnanoclaynanocompositespoly(methylcarbazole)stainless steel 304Zn nanoparticle;
89.Effect of reinforcement content on the density, mechanical and tribological properties of Ti₃SiC₂/Al₂O₃ hybrid reinforced copper-matrix pantograph slide

机译：增强剂含量对Ti _{3 SiC _{2 / Al _{2 O _{3 的密度，力学性能和摩擦学性能的影响混合增强铜基受电弓}}}}
- 作者：Xuelong Fu;Yubing Hu;Gan Peng;Jie Tao
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第6期
- hybrid reinforced copper-matrix pantograph (HRCP)pantograph and catenary system (PCS)pantograph slidetitanium silicon carbide (Ti3SiC2)tribological performance;
90.Non-linear dynamic response and vibration of an imperfect three-phase laminated nanocomposite cylindrical panel resting on elastic foundations in thermal environments

机译：处于热环境中的不完全三相层压纳米复合圆柱板的非线性动力响应和振动
- 作者：Pham Van Thu;Nguyen Dinh Duc
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第6期
- elastic foundationsnon-linear dynamicthermal environmentsthree-phase laminated nanocomposite cylindrical panelvibration;
91.Numerical study of Ti/Al/Mg three-layer plates on the interface behavior in explosive welding

机译：Ti / Al / Mg三层板爆炸焊接界面行为的数值研究
- 作者：Ruifeng Liu;Wenxian Wang;Tingting Zhang;Xiaodan Yuan
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第6期
- explosive weldinginterfacesimulationTi/Al/Mg;
92.Effects of the alkaline solution/binder ratio and curing condition on the mechanical properties of alkali-activated fly ash mortars

机译：碱溶液/粘结剂比和固化条件对碱活化粉煤灰砂浆力学性能的影响
- 作者：Maochieh Chi
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第5期
- alkali-activated fly ash (AAFA)alkaline solution-to-binder ratiocuring conditionmechanical property;
93.Aging analysis of high voltage silicone rubber/silica nanocomposites under accelerated weathering conditions

机译：加速老化条件下高压硅橡胶/二氧化硅纳米复合材料的老化分析
- 作者：Abraiz Khattak;Muhammad Iqbal;Muhammad Amin
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第5期
- accelerated agingFourier transform infrared (FTIR) spectroscopyhigh-voltage insulationleakage currentnanocompositenanosilicasilicone rubber;
94.Automated profile preforming for structural components

机译：结构部件的自动轮廓预成型
- 作者：Ewald Fauster;Christian Schillfahrt;Christian Hueber;Ralf Schledjewski
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第5期
- automated preformingfiber-reinforced polymer compositesLCM processingstructural profiles;
95.The effect of calcium salts on air-void structure in air-entrained concrete – a statistical and simulated study

机译：钙盐对加气混凝土中气孔结构的影响–统计和模拟研究
- 作者：Yong Ge;Qinfei Li;Yunsheng Zhang;Deqing Xie;Paulo J.M. Monteiro
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
- air-void distributionfoaming powerrandom “parking” methodspacing factor;
96.Microstructure and wear resistance of composite coating by laser cladding Ni60A/B₄C pre-placed powders on Ti-6Al-4V substrate

机译：在Ti-6Al-4V基体上激光熔覆Ni60A / B _{4 C粉末预涂复合涂层的组织和耐磨性}
- 作者：Hongxia Zhang;Huijun Yu;Chuanzhong Chen
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
- composite coatinghardnesslaser claddingmicrostructurewear resistance;
97.Frontmatter

机译：前垫
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第4期
98.Thermal insulating epoxy composite coatings containing sepiolite/hollow glass microspheres as binary fillers: morphology, simulation and application

机译：含有海泡石/空心玻璃微球作为二元填料的环氧隔热复合涂料：形态，模拟和应用
- 作者：Jinwei Wang;Yunpei Tian;Jin Zhang
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- finite element analysisheat transferpolymer-matrix compositesthermal conductivity coefficient;
99.Nonlinear stability of shear deformable eccentrically stiffened functionally graded plates on elastic foundations with temperature-dependent properties

机译：具有温度相关特性的弹性地基上可剪切变形的偏心加筋功能梯度板的非线性稳定性
- 作者：Pham Hong Cong;Pham Thi Ngoc An;Nguyen Dinh Duc
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期
- eccentrically stiffened moderately thick FGM platesfirst-order shear deformation plate theorynonlinear stabilitytemperature-dependent material properties;
100.Frontmatter

机译：前垫
- 期刊名称：《Science and Engineering of Composite Materials》 | 2017年第3期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号