首页>外文期刊>Oradea University. Fascicle of Management and Technological Engineering. Annals

Oradea University. Fascicle of Management and Technological Engineering. Annals

中文名称：奥拉迪亚大学。管理与技术工程分册。志

ISSN：1583-0691
出版周期：-

发文量：984

期刊论文

热门论文

年度选择

2018
- 第1期
- 第2期
- 第3期
2017
- 第xvi期
2016
- 第xv期
2015
- 第xiv期
2014
- 第xiii期
2013
- 第xii期
2012
- 第xi期
2011
- 第x期
2010
- 第ix期

更多>>

全选（0）

1.APPROACH ON THE DEVELOPMENT OF ENGINEERING SKILLS IN INDUSTRIAL ROBOTS PROGRAMMING AND OPERATING

机译：工业机器人编程与运行中工程技能的开发方法
- 作者：APPROACH ON THE DEVELOPMENT OF ENGINEERING SKILLS IN INDUSTRIAL ROBOTS PROGRAMMING AND OPERATING MERTICARU Vasile;NAGIT Gheorghe;RIPANU Marius-Ionut
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
2.ANALYZE OF SOME PROCEDURES OF ELIMINATION THE POLLUTION FROM THE RESIDUAL WATERS WITH CYANIDES CONTENT

机译：消除含氰化物残留水的某些方法的分析。
- 作者：ANALYZE OF SOME PROCEDURES OF ELIMINATION THE POLLUTION FROM THE RESIDUAL WATERS WITH CYANIDES CONTENT C??R?￠??N? Daniela;MITRAN Ramona
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
3.MATHEMATICAL MODELING OF THE AIR FLOW INSIDE THE ATMOSPHERIC BOUNDARY LAYER

机译：大气边界层内部气流的数学模拟
- 作者：Georgeta BANDOC;Liviu HA??EGAN;MATHEMATICAL MODELING OF THE AIR FLOW INSIDE THE ATMOSPHERIC BOUNDARY LAYERDEGERATU Mircea;Nicolae Ioan ALBOIU
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
4.MODELING AND SIMULATION OF UNDERWATER ROBOTS MOVEMENT IN SPACE

机译：空间中水下机器人运动的建模与仿真
- 作者：DIACONU Mihai;ION Ana;RUS Simona;RUS Victor-Octavian;ZAHARIA Florin
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
5.THEORETICAL STUDY OF THE TORSION BAR OF WEAVING MACHINE

机译：织机扭力杆的理论研究
- 作者：LUCA Gheorghe;THEORETICAL STUDY OF THE TORSION BAR OF WEAVING MACHINEVIGARU Cosmina
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
6.THE THERMAL REGIME ON THE BORDER OF COMBINED HYDRODYNAMIC BEARINGS

机译：组合水力轴承的边界上的热力学
- 作者：THE THERMAL REGIME ON THE BORDER OF COMBINED HYDRODYNAMIC BEARINGS Mihail IONESCU
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
7.A CRITICAL ANALYSIS OF THE POTENTIAL OF RENEWABLE ENERGY IN ROMANIA

机译：罗马尼亚可再生能源潜力的临界分析
- 作者：A CRITICAL ANALYSIS OF THE POTENTIAL OF RENEWABLE ENERGY IN ROMANIA MOMETE Daniela Cristina
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
8.NEW FORMING TECHNOLOGIES FOR LOW AND MEDIUM VOLUME PRODUCTION

机译：中小批量生产的新成型技术
- 作者：IANICI Draghita;IANICI Sava;NEW FORMING TECHNOLOGIES FOR LOW AND MEDIUM VOLUME PRODUCTIONCOMAN Liviu
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
9.SOME ASPECTS REGARDING RECENT ADVANCES IN LUNG MECHANICS MODELLING

机译：关于肺力学建模的最新进展的某些方面
- 作者：ALACI StelianCERLINCA Delia Aurora;CIORNEI Mariana C??t??lina;IRIMESCU Lumini?￡a;SOME ASPECTS REGARDING RECENT ADVANCES IN LUNG MECHANICS MODELLING CIORNEI Florina Carmen
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
10.A NEW METHOD FOR CAN MANUFACTURING SELL?‰S

机译：可以制造卖方的新方法？
- 作者：A NEW METHOD FOR CAN MANUFACTURING SELL?‰SSelles M.A.;JU??REZ D.;PEYDR? M.A.;S??NCHEZ-CABALLERO S.
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
11.ROLE AND COMPETITIVENESS OF SMALL AND MEDIUM-SIZED ENTERPRISES IN MODERN ECONOMY. FINANCIAL CRISIS AND ITS IMPACT ON SMALL AND MEDIUM-SIZED ENTERPRISES.

机译：中小企业在现代经济中的作用和竞争力。金融危机及其对中小型企业的影响。
- 作者：ROLE AND COMPETITIVENESS OF SMALL AND MEDIUM-SIZED ENTERPRISES IN MODERN ECONOMY. FINANCIAL CRISIS AND ITS IMPACT ON SMALL AND MEDIUM-SIZED ENTERPRISES.MIH?IL? Carmen-Oana;TEAC? Mihaela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
12.ITERATION SEQUENCES METHOD FOR THE COMPLETE LINEAR HOMOGENOUS DIFFERENTIAL EQUATION OF THE SECOND ORDER ITERATIONS. EVALUATION.

机译：二阶完全线性齐次微分方程的迭代序列方法。评估。
- 作者：ITERATION SEQUENCES METHOD FOR THE COMPLETE LINEAR HOMOGENOUS DIFFERENTIAL EQUATION OF THE SECOND ORDER ITERATIONS. EVALUATION. LEKIC Milena
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
13.AN EFFICIENT HEURISTIC METHOD OF BALANCING FOR RANDOM TIMES AND UNIQUE MODEL

机译：一种有效的随机时间平衡方法和唯一模型
- 作者：AN EFFICIENT HEURISTIC METHOD OF BALANCING FOR RANDOM TIMES AND UNIQUE MODEL COCULESCU Cristina;CRI??AN Daniela Alexandra;DESPA Radu;ST?NIC? Justina Lavinia
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
14.WIND TUNNEL TESTING ON UNDERWATER ROBOTS MODELS

机译：水下机器人模型的风洞测试
- 作者：DEGERATU Mircea;DIACONU Mihai;ION Ana;RUS Victor-Octavian;WIND TUNNEL TESTING ON UNDERWATER ROBOTS MODELSRUS Simona;ZAHARIA Florin
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
15.BIOMECHANICAL BEHAVIOR ANALYSIS OF A COXOFEMORAL SHORT STEM IMPLANT

机译：股骨短茎植入物的生物力学行为分析
- 作者：BIOMECHANICAL BEHAVIOR ANALYSIS OF A COXOFEMORAL SHORT STEM IMPLANTTOTH-TASCAU Mirela;KREPELKA Mircea
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
16.CONSTRUCTIVE IMPROVEMENTS AT LARGE CNC HYDROSTATIC ROTARY TABLES AS ACTIVE CONTINUOS CONTROLLED AXES ON HBMC MACHINES

机译：大型数控液压旋转台上的建设性改进，作为HBMC机床上的主动连续控制轴
- 作者：CONSTRUCTIVE IMPROVEMENTS AT LARGE CNC HYDROSTATIC ROTARY TABLES AS ACTIVE CONTINUOS CONTROLLED AXES ON HBMC MACHINES GANEA Macedon;GANEA Olimpiu;HORGE Ioan
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
17.AESTHETICS AND INDUSTRIAL PRODUCT DESIGN

机译：美学与工业产品设计
- 作者：AESTHETICS AND INDUSTRIAL PRODUCT DESIGN MIHARTESCU Ana-Andreea;MAZILESCU Crisanta-Alina;NEGRUT Mircea Liviu
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
18.ENVIRONMENT AND PERSONNEL PROTECTION AT THERMAL SPRAYING

机译：热喷涂的环境和人员保护
- 作者：BRAN Ibolyka;ENVIRONMENT AND PERSONNEL PROTECTION AT THERMAL SPRAYINGOPRI?? Carmen;POPESCU Mihaela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
19.ANALYSIS OF THE ASPECTS RELATED TO THE HARSHNESS OF THE SURFACES OBTAINED BY VIBRO-ROLLING

机译：振动轧制获得的与表面硬度有关的方面的分析
- 作者：ANALYSIS OF THE ASPECTS RELATED TO THE HARSHNESS OF THE SURFACES OBTAINED BY VIBRO-ROLLING POLOJINTEF CORBU Nicolae;MITRAN Tudor;PATER Sorin
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
20.STUDIES CONCERNING THE DESIGN OF THE RUNNER, GATE AND VENTING SYSTEMS IN THE CASE OF THE HIGH PRESSURE DIE CASTING TECHNOLOGY

机译：高压压铸技术中流道，浇口和通风系统设计的研究
- 作者：CORBA Cristian;GATE AND VENTING SYSTEMS IN THE CASE OF THE HIGH PRESSURE DIE CASTING TECHNOLOGY PETI Ferencz;GRAMA Lucian;SOLOV?STRU Ioan;STUDIES CONCERNING THE DESIGN OF THE RUNNER
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
21.EXPERIMENTAL RESEARCH REGARDING THE ADAPTIVE DRIVING OF ROBOTS USING FUZZY LOGIC

机译：基于模糊逻辑的机器人自适应驱动实验研究。
- 作者：EXPERIMENTAL RESEARCH REGARDING THE ADAPTIVE DRIVING OF ROBOTS USING FUZZY LOGICTRIPE VIDICAN C??lin;TOCU?￠ Pavel D??nu?￡;TRIPE VIDICAN Aron
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
22.THE IMPORTANCE OF CULTURE AFTER IMPLEMENTING A CHANGE INTO A ROMANIAN ORGANIZATION

机译：实施罗马尼亚组织变更后文化的重要性
- 作者：THE IMPORTANCE OF CULTURE AFTER IMPLEMENTING A CHANGE INTO A ROMANIAN ORGANIZATIONCOSTIN M??d??lina-Adriana
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
23.PROJECT MANAGEMENT IN DESIGN STAGE

机译：设计阶段的项目管理
- 作者：ANGHEL Daniel Constantin;PROJECT MANAGEMENT IN DESIGN STAGE BELU Nadia
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
24.A MODEL FOR PREDICTING THE MICRO-SLIP ZONE ON A FRETTING CONTACT INTERFACE

机译：微动接触界面上的微滑带预测模型
- 作者：A MODEL FOR PREDICTING THE MICRO-SLIP ZONE ON A FRETTING CONTACT INTERFACEIRIMESCU Luminita;ALACI Stelian;CERLINC? Delia Aurora;CIORNEI Florina Carmen
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
25.ECONOMIC CRISIS AND LABOUR MARKET IN BRASOV COUNTY

机译：布拉索夫县的经济危机和劳动力市场
- 作者：ECONOMIC CRISIS AND LABOUR MARKET IN BRASOV COUNTYBUZEA Carmen;MARC Cristiana Marcela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
26.THE PROCESSING OF HARDNESS COATINGS NI-P/SIC HEAT TREATED AT 3000C WITH A MATHEMATICAL MODEL

机译：数学模型在3000℃处理难涂Ni-P / SIC热的工艺
- 作者：MIHUT Nicoleta Maria;PETRESCU Mircea Ionu?￡;THE PROCESSING OF HARDNESS COATINGS NI-P/SIC HEAT TREATED AT 3000C WITH A MATHEMATICAL MODEL PAS?RE Minodora Maria
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
27.CORROSION STUDIES ON STAINLESS STEEL IN ACIDIC MEDIA

机译：酸性介质中不锈钢的腐蚀研究
- 作者：??tefan MIH?IL?;CORROSION STUDIES ON STAINLESS STEEL IN ACIDIC MEDIA Ileana ROTARU;Maria MADA
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
28.METHOD AND INSTALLATION FOR WEARING TESTING OF SINTERED BASALT

机译：烧结玄武岩的磨损测试方法和安装
- 作者：METHOD AND INSTALLATION FOR WEARING TESTING OF SINTERED BASALT PUGNA Adrian Pavel;MOCAN Marian Liviu;NEGRU STR?U?￠I Gabriela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
29.CONSIDERATIONS REGARDING THE COMPANIESa€? OBLIGATIONS TOWARDS THE DIRECTIVE 2008/114/CE CONCERNING CRITICAL INFRASTRUCTURES

机译：有关公司的注意事项？关于关键基础设施的2008/114 / CE指令的义务
- 作者：CONSIDERATIONS REGARDING THE COMPANIESa€? OBLIGATIONS TOWARDS THE DIRECTIVE 2008/114/CE CONCERNING CRITICAL INFRASTRUCTURESBUCOVETCHI Olga;DRAGOMIR Radu;SIMION Cristina Petronela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
30.BIOMECHANICAL BEHAVIOUR OF IMPLANTED LONG BONES

机译：植入长骨的生物力学行为
- 作者：BIOMECHANICAL BEHAVIOUR OF IMPLANTED LONG BONESTOTH-TASCAU Mirela;RUSU Lucian;TOADER Cristian
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
31.DESIGNING A SPHERICAL TAP USING SOLID WORKS- A DIDACTIC APPROACH

机译：使用固体作品设计球面丝锥-一种直接的方法
- 作者：ALACI Stelian;CIORNEI Florina Carmen;DESIGNING A SPHERICAL TAP USING SOLID WORKS- A DIDACTIC APPROACH CERLINCA Delia Aurora;IRIMESCU Luminita;SP??NU Sergiu
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
32.ELASTIC AND SAFETY CLUTCHES WITH INTERMEDIATE RUBBER ELEMENTS

机译：带有中间橡胶元件的弹性和安全离合器
- 作者：ELASTIC AND SAFETY CLUTCHES WITH INTERMEDIATE RUBBER ELEMENTS STROE Ioan
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
33.A QUANTITATIVE EVALUATION OF JOURNAL BEARINGS LIGHTLY LOADED

机译：轻载的滑动轴承的定量评估
- 作者：A QUANTITATIVE EVALUATION OF JOURNAL BEARINGS LIGHTLY LOADED Mihail IONESCU
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
34.COMPUTER PROGRAM FOR THE SOLAR IRRADIANCE EVALUATION a€“ SIMULATED DATA VALIDATION

机译：太阳能辐照度评估和模拟数据验证的计算机程序
- 作者：COMPUTER PROGRAM FOR THE SOLAR IRRADIANCE EVALUATION a€ SIMULATED DATA VALIDATION EFTIMIE Elena
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
35.STUDIES ON THE MAIN CUTTING FORCE IN TURNING POLYAMIDE PA 66

机译：聚酰胺PA 66车削主要切削力的研究
- 作者：STUDIES ON THE MAIN CUTTING FORCE IN TURNING POLYAMIDE PA 66 MO?￠OI Marin
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
36.DYNAMIC MODELING OF QUADRUPED BIOMECHANISM

机译：四重生物力学的动态建模
- 作者：DYNAMIC MODELING OF QUADRUPED BIOMECHANISMMICU Cristina;GEONEA Ionu?￡ Daniel
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
37.LOGISTICAL ISSUES IN VIRTUAL ORGANISATIONSa€? MANAGEMENT

机译：虚拟组织的物流问题管理
- 作者：LOGISTICAL ISSUES IN VIRTUAL ORGANISATIONSa€? MANAGEMENT FIDLER Branislav;VAL??UHA ?tefan
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
38.MASTER STUNDENTS INTEREST FOR ENTREPRENEURIAL SKILLS DEVELOPMENT

机译：对企业家技能发展的主要兴趣
- 作者：ALBULESCU Claudiu;MASTER STUNDENTS INTEREST FOR ENTREPRENEURIAL SKILLS DEVELOPMENT DRAGHICI Anca;SUCIU Sorin-Florin;TION Monica
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
39.IMPROVING OF THE MECHANICAL PROPERTIES OF WOOD BEAMS REINFORCED WITH CFRP COMPOSITES PLATES

机译：CFRP复合板增强木梁的力学性能
- 作者：IMPROVING OF THE MECHANICAL PROPERTIES OF WOOD BEAMS REINFORCED WITH CFRP COMPOSITES PLATES IAN???I Aurora-C??t??lina
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
40.ELASTIC PLASTIC NON-CONFORMING CONTACT MODELING PART II: RESULTS AND DISCUSSIONS

机译：弹塑性非协调接触建模第二部分：结果与讨论
- 作者：ELASTIC PLASTIC NON-CONFORMING CONTACT MODELING PART II: RESULTS AND DISCUSSIONS FRUNZA Gheorghe;SPINU Sergiu
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
41.HUMAN UPPER LIMB 3D MODEL OBTAINED THROUGH A NEW MODELING TECHNIQUE

机译：通过一种新的建模技术获得了人类上肢3D模型
- 作者：GRECU Valentin;HUMAN UPPER LIMB 3D MODEL OBTAINED THROUGH A NEW MODELING TECHNIQUE COPILU??I Cristian;STANCA Cristina
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
42.PERFORMANCE ANALYSES OF CONWIP CONTROLLED PRODUCTION SYSTEM USING SIMULATION

机译：基于仿真的露点控制生产系统性能分析
- 作者：PERFORMANCE ANALYSES OF CONWIP CONTROLLED PRODUCTION SYSTEM USING SIMULATION ROTARU Ana
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
43.FEM ANALYSIS OF THE BEVEL GEAR HOUSING OF AN AZIMUTHAL, TRACKED PV PLATFORM

机译：双向履带式光伏平台的箱式齿轮箱的有限元分析
- 作者：FEM ANALYSIS OF THE BEVEL GEAR HOUSING OF AN AZIMUTHAL;LATE?? Mihai;MOLDOVEAN Gheorghe;TRACKED PV PLATFORM BUTUC Bianca R.
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
44.A SIMPLIFIED MODEL FOR PRESSURE DISTRIBUTION IN ELASTIC a€“ PERFECTLY PLASTIC CONTACTS

机译：弹性和完全塑性接触中压力分布的简化模型
- 作者：A SIMPLIFIED MODEL FOR PRESSURE DISTRIBUTION IN ELASTIC a€ PERFECTLY PLASTIC CONTACTSUNGUREANU Ioan;SPINU Sergiu
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
45.NATURE AND EXTENT OF RISKS ARISING FROM FINANCIAL INSTRUMENTS: QUALITATIVE DISCLOSURES

机译：金融工具引起的风险的性质和范围：定性披露
- 作者：NATURE AND EXTENT OF RISKS ARISING FROM FINANCIAL INSTRUMENTS: QUALITATIVE DISCLOSURES ANDREI Monica;OPREA Margareta
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
46.TECHNOLOGICAL PROCESS OF SOUND-ABSORBING PANELS

机译：吸音板的工艺流程
- 作者：ARGHIR Mariana;MARCU Florin;MIHAILA Ioan;POP Petru A.;TECHNOLOGICAL PROCESS OF SOUND-ABSORBING PANELS UNGUR Patricia A.
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
47.SOME ASPECTS REGARDING THE REPARATION METHODS USED IN OILFIELD EQUIPMENT

机译：关于油田设备中使用的修复方法的某些方面
- 作者：B?LAN Cristinel;POPA Ioan;SOME ASPECTS REGARDING THE REPARATION METHODS USED IN OILFIELD EQUIPMENTSTANCIU Lavinia Silvia
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
48.THE MATHEMATICAL SIMULATION OF THE WORKING ACCURACY DURING COLD GEAR GENERATION THROUGH INTERMITTENT BLOW

机译：间歇吹气产生冷齿轮过程中工作精度的数学模拟
- 作者：THE MATHEMATICAL SIMULATION OF THE WORKING ACCURACY DURING COLD GEAR GENERATION THROUGH INTERMITTENT BLOW Ion DOBRESCU
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
49.INNOVATION ASSESMENT IN THE EUROPEAN UNION. NATIONAL AND REGIONAL APPROACHES

机译：欧洲联盟的创新评估。国家和地区方法
- 作者：GOSCHIN Zizi;INNOVATION ASSESMENT IN THE EUROPEAN UNION. NATIONAL AND REGIONAL APPROACHES DANCIU Aniela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
50.ABOUT SMEs` BRAND AND IMAGE

机译：关于中小企业的品牌和形象
- 作者：ABOUT SMEs` BRAND AND IMAGE BUDAL? Adrian
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2010年第ix期
51.CHIPS SHAPES AT END-MILLING OF OL37 STEEL

机译：OL37钢末端铣削时的芯片形状
- 作者：CHIPS SHAPES AT END-MILLING OF OL37 STEELPascu Cristina Ileana;Popescu Iulian
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
52.MODELING THE TRAVEL DEMAND IN A COUNTY ROAD PUBLIC TRANSPORT SYSTEM

机译：县道路公共交通系统中的出行需求建模
- 作者：Ilie Sorin;Mitran Gabriela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
53.THE NEWEST AND MOST ADVANCED BORING MILLING MACHINE AT STIMIN

机译：STIMIN最新最先进的镗铣床
- 作者：Cherman Ioan;Ganea Macedon;Percze Atilla;THE NEWEST AND MOST ADVANCED BORING MILLING MACHINE AT STIMINHorge Ioan
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
54.DESIGNING AND DEVELOPING A SUPERFINISHING DEVICE WITH VARIABLE AMPLITUDE AND FREQUENCY FOR OLC45 PARTS

机译：设计和开发具有可变振幅和频率的OLC45零件的超精加工设备
- 作者：DESIGNING AND DEVELOPING A SUPERFINISHING DEVICE WITH VARIABLE AMPLITUDE AND FREQUENCY FOR OLC45 PARTSGabor Marius
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
55.ASPECTS REGARDING THE DESIGN OF THE GRIPPERS IN ROBOTIC HANDLING OPERATIONS USED OF AUTO BODYWORK SUBANSSEMBLIES

机译：关于汽车车身部件的机器人装卸操作中夹爪设计的方面
- 作者：Tocu? D?nu? Pavel
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
56.THE IMPACT OF STRESS UPON THE BIHOR COUNTY ENTREPRENEURS.

机译：压力对Bihor县企业家的影响。
- 作者：Costin M?d?lina-Adriana;THE IMPACT OF STRESS UPON THE BIHOR COUNTY ENTREPRENEURS.Bucurean Mirela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
57.EVALUATION THE INFLUENCE OF THE NUMBER OF WINDINGS FOR A WIRE ROPE ISOLATOR IN FREQUENCY RESPONSE FUNCTION

机译：钢丝绳隔离器的绕组数对频率响应函数的影响
- 作者：Cosmin Boricean;EVALUATION THE INFLUENCE OF THE NUMBER OF WINDINGS FOR A WIRE ROPE ISOLATOR IN FREQUENCY RESPONSE FUNCTIONDaniel Buzea;Ioan Calin Rosca;Laszlo Kopacz
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
58.MATHEMATICAL MODEL FOR CALCULATION OF LINEAR ELASTIC SHAFTS

机译：线性弹性轴计算的数学模型
- 作者：Grigore Jan-Cristian;MATHEMATICAL MODEL FOR CALCULATION OF LINEAR ELASTIC SHAFTSBulac Ion
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
59.QUALITY ASSURANCE MATRIX IN AUTOMOTIVE INDUSTRY

机译：汽车行业的质量保证矩阵
- 作者：Belu Nadia;Bondoc Maria Daniela;QUALITY ASSURANCE MATRIX IN AUTOMOTIVE INDUSTRY?tirbu Lumini?a
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
60.The machine-tool for processing elliptical piston by milling and grinding

机译：铣削加工椭圆形活塞的机床
- 作者：grindingMure?an Nicodim;The machine-tool for processing elliptical piston by milling
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
61.KNOWLEDGE MANAGEMENT AND HUMAN CAPITAL STATE UNIVERSITY

机译：知识管理与人力资本大学
- 作者：Feraru Andreea;KNOWLEDGE MANAGEMENT AND HUMAN CAPITAL STATE UNIVERSITYMironescu Roxana
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
62.THEORETICAL CONSIDERATIONS UPON PLASTIC SHEAR REGIONS IN A LUBRICANT FILM PLACED BETWEEN AN ASPERITY AND A PLANE

机译：在平面和平面之间润滑膜中塑性剪切区的理论考虑
- 作者：THEORETICAL CONSIDERATIONS UPON PLASTIC SHEAR REGIONS IN A LUBRICANT FILM PLACED BETWEEN AN ASPERITY AND A PLANEVasilache Fomin Michaela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
63.SHORT TERM MECHANICAL EVALUATION OF THE NEXT GEN? IMPLANT

机译：下一代的短期机械评估？注入
- 作者：Hozan C?lin Tudor;Mostfa A. A. Alshrfi;SHORT TERM MECHANICAL EVALUATION OF THE NEXT GEN? IMPLANTVlad Silviu Valentin
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
64.CONSIDERATION REGARDING THE MONITORING AND DIAGNOSIS OF MANUFACTURING SYSTEMS

机译：关于制造系统的监控和诊断的考虑
- 作者：CONSIDERATION REGARDING THE MONITORING AND DIAGNOSIS OF MANUFACTURING SYSTEMSPopp Ilie Octavian
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
65.BUSINESS COMMUNICATION NETIQUETTE – A NEED FOR THE QUALITY OF HUMAN RESOURCES

机译：商业通信网络–人力资源质量的需求
- 作者：BUSINESS COMMUNICATION NETIQUETTE – A NEED FOR THE QUALITY OF HUMAN RESOURCESPop Anamaria Mirabela;Sim Monica Ariana
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
66.CONSIDERATIONS ON THE COMPOSITE NEOPRENE VIBRATION ISOLATORS USED FOR THE MECHANICAL SYSTEMS BEARINGS. THE DYNAMICS OF THE NON-LINEAR MODELS

机译：有关用于机械系统轴承的复合式隔振器的注意事项。非线性模型的动力学
- 作者：CONSIDERATIONS ON THE COMPOSITE NEOPRENE VIBRATION ISOLATORS USED FOR THE MECHANICAL SYSTEMS BEARINGS. THE DYNAMICS OF THE NON-LINEAR MODELSDragan Nicusor
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
67.COMPANY IDENTITY AND BUSINESS MODELS IN THE VIRTUAL WORLD OF PROSUMER COLLABORATION

机译：消费者合作虚拟世界中的公司身份和业务模型
- 作者：COMPANY IDENTITY AND BUSINESS MODELS IN THE VIRTUAL WORLD OF PROSUMER COLLABORATIONIzvercianu Monica;Seran Sabina
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
68.General aspects concerning the delamination phenomenon in fiber reinforced polymeric biomaterials

机译：纤维增强聚合物生物材料中分层现象的一般方面
- 作者：Bejinaru Mihoc Gheorghe;General aspects concerning the delamination phenomenon in fiber reinforced polymeric biomaterialsPop P. Adrian;Mitu Leonard
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
69.IDENTIFICATION OF THE VIBRATION EIGEN MODES FOR ELASTIC ENGINE MOUNTINGS

机译：弹性发动机座架振动本征模式的识别
- 作者：Iacob Adrian;IDENTIFICATION OF THE VIBRATION EIGEN MODES FOR ELASTIC ENGINE MOUNTINGSBuzea Daniel;Soimaru Cristian
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
70.TENSIONING AND GUIDING SYSTEMS USED IN CHAIN DRIVES

机译：链传动中使用的张紧和导向系统
- 作者：Papuc Radu;TENSIONING AND GUIDING SYSTEMS USED IN CHAIN DRIVESJaliu Codruta;Velicu Radu
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
71.MONITORING COLD WATER METER USING A COMBINED METHOD CABLE AND RADIO WAVES

机译：使用电缆和无线电波的组合方法监控冷水表
- 作者：Mih?il? Ioan;MONITORING COLD WATER METER USING A COMBINED METHOD CABLE AND RADIO WAVESBoti? Aurel Cristian1
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
72.SOME SPECIFICATIONS CONCERNING EULER’S ANGLES IN THE STUDY OF RIGIDIS’S MOVEMENT WITH A FIX POINT

机译：关于EULER角度在固定点运动中对RIGIDIS运动的研究的一些规范
- 作者：SOME SPECIFICATIONS CONCERNING EULER’S ANGLES IN THE STUDY OF RIGIDIS’S MOVEMENT WITH A FIX POINTMihu? Nicoleta Maria
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
73.ASSESSMENT OF THE OUTCOMES OF SUSTAINABLE DEVELOPMENT GOALS

机译：评估可持续发展目标的成果
- 作者：ASSESSMENT OF THE OUTCOMES OF SUSTAINABLE DEVELOPMENT GOALSMomete Daniela Cristina
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
74.INTERNATIONAL AND ROMANIAN REGULATIONS IN REGARD TO INTERVENTIONS ON HISTORIC FABRIC – A CROSS-READING STUDY

机译：关于历史织物干预的国际和罗马尼亚法规-交叉阅读研究
- 作者：INTERNATIONAL AND ROMANIAN REGULATIONS IN REGARD TO INTERVENTIONS ON HISTORIC FABRIC – A CROSS-READING STUDYAndreica Ligia
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
75.SOME CONSIDERATIONS ABOUT SMEs’ MANAGERS SKILLS AND PEOPLE LEADING

机译：有关中小型企业管理人员技能和人员领导的一些注意事项
- 作者：SOME CONSIDERATIONS ABOUT SMEs’ MANAGERS SKILLS AND PEOPLE LEADINGBudal? Adrian
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
76.APPROXIMATION OF AIR POLLUTION IN CENTRAL AREA OF BRASOV

机译：布拉索夫中部地区空气污染的近似值
- 作者：APPROXIMATION OF AIR POLLUTION IN CENTRAL AREA OF BRASOV?arulescu Stelian;?arulescu Radu
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
77.Annals of the Oradea University: Fascicle of Management and Technological Engineering(2012), volume XXI, issue XI

机译：《奥拉迪亚大学年鉴：管理与技术工程专论》（2012年），第二十卷，第十一期
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
78.ALGORITHM DETERMINING THE COMMON OPERATION CHARACTERISTIC OF THE ENGINE-HYDRODYNAMIC TORQUE CONVERTER SYSTEM

机译：确定发动机-液力变矩器系统共同工作特性的算法
- 作者：ALGORITHM DETERMINING THE COMMON OPERATION CHARACTERISTIC OF THE ENGINE-HYDRODYNAMIC TORQUE CONVERTER SYSTEMN?st?soiu Mircea;Ispas Nicolae
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
79.ADAPTIVE CONTROL FOR TOOLS OPERATING WITH SIMILAR WORKING PROCESS AS CUTTING MACHINES

机译：与切削加工类似的加工过程的刀具的自适应控制
- 作者：ADAPTIVE CONTROL FOR TOOLS OPERATING WITH SIMILAR WORKING PROCESS AS CUTTING MACHINESSbarciog I. Ioan
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
80.EXPERIMENTAL INVESTIGATIONS UPON FINITE LINE LENGTH CONTACTS BETWEEN NONLINEAR ELASTIC BODIES SUBJECTED TO LARGE DEFORMATIONS

机译：受到大变形影响的非线性弹性体之间有限线长接触的实验研究
- 作者：EXPERIMENTAL INVESTIGATIONS UPON FINITE LINE LENGTH CONTACTS BETWEEN NONLINEAR ELASTIC BODIES SUBJECTED TO LARGE DEFORMATIONSRomanu Ionu? Cristian;Musc? Ilie
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
81.INFLUENCES OF BIODIESEL BLENDS COLD FLOW PROPERTIES ON DIESEL ENGINES

机译：生物柴油混合冷流特性对柴油机的影响
- 作者：INFLUENCES OF BIODIESEL BLENDS COLD FLOW PROPERTIES ON DIESEL ENGINESTutunea Dragos
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
82.TRAFFIC IMPACT STUDY FOR A NEW GAS STATION IN PITESTI CITY

机译：皮特什蒂市新加气站的交通影响研究
- 作者：Ilie Sorin;Tabacu Ion;TRAFFIC IMPACT STUDY FOR A NEW GAS STATION IN PITESTI CITYMitran Gabriela
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
83.SOLUTIONS TO OPTIMIZE TRANSMISSION CHAINS CHARACTERISTICS

机译：优化传输链特性的解决方案
- 作者：Saulescu Radu;SOLUTIONS TO OPTIMIZE TRANSMISSION CHAINS CHARACTERISTICSJaliu Codruta;Todi-Eftimie Alina
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
84.THOUGHTS ON INTELLIGENCE, TALENT AND AUTISM IN THE CONTEXT OF A COMPETENCE SURVEY

机译：在能力调查中对智力，才干和自闭症的思考
- 作者：TALENT AND AUTISM IN THE CONTEXT OF A COMPETENCE SURVEYRády Eszter Andrea;THOUGHTS ON INTELLIGENCE
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2012年第xi期
85.HEAT PUMPS, HEATING SYSTEMS FOR INTELLIGENS BUILDINGS

机译：热泵，智能建筑供暖系统
- 作者：HEAT PUMPS;HEATING SYSTEMS FOR INTELLIGENS BUILDINGS Imre T??r??k;J??nos T?3th
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
86.THE INFLUENCE OF THE SPIRAL BEVEL GEARS GEOMETRY ON THE GLOBAL GEOMETRIC FACTOR

机译：螺旋锥齿轮的几何形状对全球几何因子的影响
- 作者：Doru Velicu;Livia Huidan;THE INFLUENCE OF THE SPIRAL BEVEL GEARS GEOMETRY ON THE GLOBAL GEOMETRIC FACTORGheorghe Moldovean
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
87.MECHANICAL PROPERTIES FORECAST IN COMPOSITES USING NEURAL NETWORKS

机译：基于神经网络的复合材料力学性能预测
- 作者：F. Parres;J.E. Crespo;M.A. Selles;MECHANICAL PROPERTIES FORECAST IN COMPOSITES USING NEURAL NETWORKSS. S??nchez-Caballero;R. Pla-Ferrando
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
88.A STUDY ON INTERMODAL PASSENGER TRANSPORT AT REGIONAL LEVEL

机译：区域级联运客运的研究
- 作者：A STUDY ON INTERMODAL PASSENGER TRANSPORT AT REGIONAL LEVELGabriela Mitran;Alexandru Boroiu;Ion Tabacu;Sorin Ilie;Viorel Nicolae
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
89.SPECIFICITY OF STRATEGIC ALTERNATIVES IN DELAYED PRODUCTS MARKETING

机译：战略替代产品在延迟产品营销中的特殊性
- 作者：Cristina Hora;Horea Hora;Simona Dzi?￡ac;SPECIFICITY OF STRATEGIC ALTERNATIVES IN DELAYED PRODUCTS MARKETINGD??nu?￡ Dumitrescu
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
90.A NUMERICAL SOLUTION TO THE CATTANEO-MINDLIN PROBLEM PART I: ALGORITHM DESCRIPTION

机译：CATTANEO-MINDLIN问题的数值解决方案第一部分：算法描述
- 作者：A NUMERICAL SOLUTION TO THE CATTANEO-MINDLIN PROBLEM PART I: ALGORITHM DESCRIPTIONSergiu Spinu;Dorin Gradinaru
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
91.PROCEEDING OF GENERATED OF ELASTIC AND SAFETY CLUTCHES

机译：生成弹性和安全性规则的过程
- 作者：PROCEEDING OF GENERATED OF ELASTIC AND SAFETY CLUTCHESIoan Stroe
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
92.SPECIFIC EQUIPEMENT FOR TOOL FLOW WITHIN THE FLEXIBLE MANUFACTURING SYSTEMS

机译：柔性制造系统中的工具流专用设备
- 作者：Macedon GANEA;SPECIFIC EQUIPEMENT FOR TOOL FLOW WITHIN THE FLEXIBLE MANUFACTURING SYSTEMS Ovidiu MOLDOVAN
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
93.MAKING PRESENTATIONS a€“ A COMMON TASK INVOLVING PLENTY OF COMMUNICATIONAL SKILLS

机译：进行演讲是涉及众多沟通技巧的一项常见任务
- 作者：MAKING PRESENTATIONS a€ A COMMON TASK INVOLVING PLENTY OF COMMUNICATIONAL SKILLSIoana Horea
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
94.ADHESION OF COMPOSITE MATERIALS

机译：粘接复合材料
- 作者：ADHESION OF COMPOSITE MATERIALSMinodora Maria Pasare;Nicoleta Maria Mihut
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
95.BEVEL GEARS GEOMETRY INFLUENCE ON THE LOAD SHARING FACTOR ZLS

机译：BEVEL齿轮的几何形状对载荷共享因子ZLS的影响
- 作者：BEVEL GEARS GEOMETRY INFLUENCE ON THE LOAD SHARING FACTOR ZLSGheorghe Moldovean;Cornel C??t??lin Gavril??
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
96.RISK MANAGEMENT IN PUBLIC DEBT MANAGEMENT

机译：债务管理中的风险管理
- 作者：RISK MANAGEMENT IN PUBLIC DEBT MANAGEMENTDrago?? Ilie
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
97.PREDICTION STRATEGY FOR THE WIND TURBINE BEHAVIOUR BY CONSIDERING THE INLFUENCE OF THE BLADES NUMBER

机译：考虑叶片数的影响的风轮机性能预测策略
- 作者：Per Ulrik Hansen;PREDICTION STRATEGY FOR THE WIND TURBINE BEHAVIOUR BY CONSIDERING THE INLFUENCE OF THE BLADES NUMBERMihai-Tiberiu Lates
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
98.THERMAL SPRAYING - INTERDISCIPLINARY DOMAIN

机译：热喷涂-跨学科领域
- 作者：Carmen Opris;Ibolyka Bran;Radu Alexandru Rosu;THERMAL SPRAYING - INTERDISCIPLINARY DOMAINMihaela Popescu
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
99.THE UNIKM PROJECT: COMPARATIVE RESEARCHES CONCERNING KNOWLEDGE MANAGEMENT IN ROMANIAN ENGINEERING EDUCATION

机译：UNIKM项目：罗马尼亚工程教育中有关知识管理的比较研究
- 作者：Marius BABAN;THE UNIKM PROJECT: COMPARATIVE RESEARCHES CONCERNING KNOWLEDGE MANAGEMENT IN ROMANIAN ENGINEERING EDUCATIONCalin Florin BABAN
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期
100.A REVIEW OF THE DRILLING PROCESSES OF COMPOSITE MATERIALS

机译：复合材料的钻孔过程综述
- 作者：A REVIEW OF THE DRILLING PROCESSES OF COMPOSITE MATERIALSGheorghe Bejinaru Mihoc2;Adrian Pop1;Diana Cazangiu2;Horia Geaman2;Leonard Mitu2
- 期刊名称：《Oradea University. Fascicle of Management and Technological Engineering. Annals》 | 2011年第x期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号