首页>外文期刊>Metallography, Microstructure, and Analysis

Metallography, Microstructure, and Analysis

中文名称：金相，显微组织和分析

ISSN：2192-9262
出版周期：Bimonthly

发文量：256

期刊论文

热门论文

年度选择

2022
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2021
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2020
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2019
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2017
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2016
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2015
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2014
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2013
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2012
- 第1期
- 第2期
- 第4期
- 第5期
- 第6期

更多>>

全选（0）

1.Can You Identify the Microstructure?

机译：你能识别微观结构吗？
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第3期
2.Effect of Phosphorus Addition on Dry Sliding Behavior of Fe–P Alloys Prepared by Powder Metallurgy

机译：磷冶金制备的Fe-P合金干式滑动行为的影响
- 作者：S. K. Chaurasia;Ujjwal Prakash;Vikram Dabhade;S. K. Nath
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第3期
- Dry sliding wear;
- Powder metallurgy;
- Fe–P alloy;
- Wear rate;
- Coefficient of friction;
3.MMA Editorial Board Member Participates in Key Study to Improve Properties of Steel

机译：MMA编辑委员会成员参与改善钢材的关键研究
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第3期
4.Abrasive Wear of Compacted Graphite Cast Iron with Added Tin

机译：磨削石墨铸铁的磨料磨损加入锡
- 作者：Yezhe Lyu
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第1期
- Cast iron;
- Wear;
- Microstructure;
- Sn;
- Vermicular graphite;
- Brake disk;
5.Orientation-Dependent Tensile Flow Behavior of Zircaloy-4 at Room Temperature

机译：在室温下取向依赖性拉伸流动-4的Zircaloy-4
- 作者：K. Limbadri;Swadesh Kumar Singh;Kosaraju Satyanarayana;A. K. Singh;A. Maruthi Ram;Mina Ravindran;K. V. Mani Krishna;M. Chaitanya Reddy;Kurra Suresh
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第4期
- Zircaloy-4;
- Texture;
- Tensile properties;
- Tensile flow behavior;
- Instantaneous work-hardening rate;
6.Effect of Hot Deformation and Aging of AA7075-Based 10 wt.% Graphite-Reinforced Composite on Wear Behavior and Microstructural Subsurface Deformation

机译：基于AA7075的10重量的热变形和老化的影响。％石墨增强复合材料磨损行为和微观结构地下变形
- 作者：Dhokey N. B.;Jadhav A. G.;Kandula M. L.;Nimbalkar V
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第3期
- AA7075 graphite composite;
- Wear mechanism;
- Hot forging;
- Aging;
7.Microstructure and Mechanical Properties of Characteristic Regions Inside Mold During Mg-AI-Zn Alloy Extrusion Processing

机译：Mg-Ai-Zn合金挤出加工过程中模具内部特性区域的微观结构和力学性能
- 作者：QiTang;Mingyang Zhou;Lingling Fan
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第3期
- Magnesium alloy;
- Extrusion die;
- Microstructure;
8.Microstructure Evolution and Phase Transitions of the Annealed Cu-11 %AI Alloy with Sn and Gd Additions

机译：用Sn和GD添加的退火Cu-11％AI合金的微观结构演化与相转变
- 作者：J.S.Souza;R.A.G.Silva
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第6期
- Gd addition;
- Sn addition;
- Phase transitions;
- Cu-Al alloys;
9.Electrical Discharge Machining Performance of Deep Cryogenically Treated Inconel 825 Superalloy: Emphasis on Surface Integrity

机译：深冷冻处理的电气放电加工性能825超级合金：强调表面完整性
- 作者：Rahul;Saurav Datta
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第2期
10.MMA Editorial Board Member Participates in Key Study to Improve Properties of Steel

机译：MMA编辑委员会成员参与改善钢材的关键研究
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第3期
11.Microstructural Evolutions During the ECMAP Process Using the Die with Optimum Geometrical Parameters

机译：使用芯片具有最佳几何参数的ECMAP过程中的微观结构演进
- 作者：Keshtiban P. M.
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第4期
- Optimized ECMAP;
- Strip samples;
- Al-3Mg;
12.Effect of Niobium Addition on Microstructure and Mechanical Properties of Fe-7Al-0.35C Low-Density Steel

机译：铌添加对Fe-7 - 0.35℃低密度钢组织和力学性能的影响
- 作者：Khaple Shivkumar;Prakash Ujjwal;Golla Brahma Raju;Satya Prasad V. V.
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第2期
- Low-density steel;
- Nb addition;
- NbC;
- Fe-Al-C-Nb;
- ThermoCalc;
- Mechanical properties;
13.Influence of Temperature Variation on Tribological Behavior of Aluminum Matrix Hybrid Composites: A Statistical Analysis

机译：温度变化对铝基杂交复合材料摩擦学行为的影响：统计分析
- 作者：V. V. Monikandan;M. A. Joseph;P. K. Rajendrakumar
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
- High-temperature wear;
- Hybrid metal matrix composites;
- Tribolayer;
- Full factorial design;
14.Presentations, Publications, and Progress

机译：演示，出版物和进步
- 作者：McIntyre R. Louthan
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
15.Further Observations of Linear Arrays of Transition-Iron-Carbide Precipitates in Tempered 4340 Steel

机译：在钢化4340钢中沉淀过渡 - 碳化铁 - 碳化铁的线性阵列的进一步观察
- 作者：Steven Thompson
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
16.Effect of Hafnium Addition in 60NiTi Alloy Hardened Under Open Atmosphere Conditions

机译：铪加加入在60烷基合金中的影响在开放的大气条件下硬化
- 作者：Khashayar Khanlari;Maziar Ramezani;Piaras Kelly;Thomas Neitzert
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第4期
- Intermetallics;
- 60NiTi;
- Hf addition;
- Open atmosphere heat treatment;
17.Can You Identify the Microstructure?

机译：你能识别微观结构吗？
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第4期
18.Another Link in the Chain: Archaeometallurgical Investigation of an Anchor Chain from the Nineteenth Century Akko Tower Shipwreck

机译：链条中的另一个链接：来自十九世纪的锚链的锚固链Akko Tower Shipwreck
- 作者：Iddan N.;Ashkenazi D.;Ariely S.;Cvikel D.
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第2期
- Cast iron;
- Metallography;
- Microstructure;
- Shipwreck;
- Stud-link;
- Wrought iron;
19.2018 Henry Clifton Sorby Award

机译：2018年Henry Clifton Sorby奖
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第4期
20.Understanding the Laser Powder Bed Fusion of AlSi10Mg Alloy

机译：了解Alsi10mg合金的激光粉床融合
- 作者：Hyer Holden;Zhou Le;Park Sharon;Gottsfritz Guilherme;Benson George;Tolentino Bjorn;McWilliams Brandon;Cho Kyu;Sohn Yongho
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第4期
- Additive Manufacturing;
- Aluminum Alloys;
- Microstructure;
- Solidification;
21.Effect of Fe3P and Cu Addition on Sintering Behavior of 434L Ferritic Stainless Steel in Reducing (H-2) Atmosphere

机译：Fe3P和Cu的作用对434L铁素体不锈钢在减少（H-2）大气中的烧结行为
- 作者：Nirala Akhileshwar
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第2期
- Stainless steel;
- Ferritic stainless steel;
- Powder metallurgy;
- Yield strength;
- Tensile rupture strength;
22.Effect of Solution Treatment Temperature on Impact Toughness (Room Temperature and 77?K) of a 12Cr–10Ni Martensitic Precipitation Hardenable Stainless Steel

机译：溶液处理温度对12Cr-10Ni马氏体沉淀的冲击韧性（室温和77×K）的影响淬灭的不锈钢
- 作者：C. R. Anoop;Aditya Prakash;S. V. S. Narayana Murty;Indradev Samajdar
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第4期
- Electron backscattered diffraction;
- Fractography;
- Grain boundaries;
- Heat-treating;
- Iron alloys;
23.Structure and Atomic Profile of Grain Boundary Triple Junctions in Tungsten

机译：钨晶界三重交界处的结构和原子概况
- 作者：E. V. Sadanov;I. V. Starchenko;V. A. Ksenofontov;I. M. Mikhailovskij
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
- Polycrystal;
- Grain boundaries;
- Triple junctions;
- Field ion microscope;
- Tungsten;
24.Effect of Martensite Morphology on Tribological Behaviour of a Low-Alloy Steel

机译：马氏体形态对低合金钢摩擦学行为的影响
- 作者：C.Trevisiol;A. Jourani;S. Bouvier
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第1期
- Microstructure;
- Dual-phase;
- Hardness;
- Abrasive wear;
- Friction;
- Roughness;
25.Flow Behavior and Microstructure of a Mo-V-Ti Micro-Alloyed High-Strength Steel

机译：Mo-V-Ti微合金高强度钢的流动性能和微观结构
- 作者：Guo Weimin;Ding Ning;Liu Long;Liu Chengbao;Xu Na;Li Nan
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第2期
- Hot compression;
- Flow curve;
- Microstructure;
- Mo-V-Ti micro-alloyed steel;
- Precipitation;
26.Analysis of the Ordered Crystal Structure of Cu 3Ge Intermetallic

机译：Cu <下标> 3 GE金属间结构的有序晶体结构分析
- 作者：H. M. Tawancy;M. O. Aboelfotoh
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
- Cu3Ge;
- Thin films;
- Ordering;
- L12superlattice;
- D0asuperlattice;
- Electron microscopy;
27.ASM Releases Updated Handbook on Materials Characterization

机译：ASM发布更新的材料表征手册
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第6期
28.Effect of Processing Routes on Orientation-Dependent Tensile Flow Behavior of Zircaloy-4 at Elevated Temperatures

机译：加工路径对升温温度下锆型-4的取向依赖性拉伸流动的影响
- 作者：K. Limbadri;Swadeshi Kumar Singh;Kosaraju Satyanarayana
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第3期
- Zircaloy-4;
- Texture;
- Anisotropy index;
- Tensile properties;
- Instantaneous work-hardening curves;
29.Comprehensive Microstructural Evaluation of Precipitation in Inconel 718

机译：综合微观结构评估inconel 718中的降水
- 作者：Davuluri Sindhura;Mantha Venkata Sravya;G. V. S. Murthy
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第2期
- Inconel 718;
- Aging;
- Ultrasonic velocity;
- Elastic constants;
- Mechanical properties;
30.2017 Jacquet-Lucas Award for Excellence in Metallography

机译：2017年雅典 - 卢卡斯奖卓越的金相术
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第5期
31.Investigation of the Microstructure, Micro-Texture and Mechanical Properties of a HSLA Steel, Hot-Rolled and Quenched at Different Cooling Rates

机译：对HSLA钢的微观结构，微观纹理和力学性能的研究，在不同的冷却速率下热轧和淬火
- 作者：Shahram Abbasi;Mohammad Esmailian;Shahrokh Ahangarani
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第5期
- HSLA steel;
- Cooling rate;
- Microstructure;
- Micro-texture;
- Mechanical properties;
32.Effect of Various Welding Parameters on Corrosion Behavior of Friction-Stir-Welded AA 7075-T651 Alloys

机译：各种焊接参数对摩擦搅拌焊接AA 7075-T651合金腐蚀行为的影响
- 作者：Pratik H. Shah;Vishvesh Badheka
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第3期
- Friction stir welding;
- Corrosion;
- Aluminum 7075-T651;
- EXCO;
- Intermetallics;
- Pitting;
33.Selection of FSW Tool Parameters for Joining Al-Mg4.2 Alloy: An Experimental Approach

机译：选择用于加入Al-Mg4.2合金的FSW工具参数：实验方法
- 作者：Amit Goyal;Ramesh Kumar Garg
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第5期
- FSW;
- Aluminum alloy;
- Microstructure;
- Tensile properties;
- EBSD;
34.Effect of Heat Treatments on the Mechanical and Electrochemical Corrosion Behavior of 38CrSi and AISI 4140 Steels

机译：热处理对38Crsi和AISI 4140钢的机械和电化学腐蚀行为的影响
- 作者：Muhammad Arslan Hafeez;Ameeq Farooq
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第4期
- Retained austenite;
- Tafel scan;
- Martensite;
- Tempering;
35.Effect of Heat Treatment on Microstructure and Properties of Al-7.0Zn-1.5Cu-1.5Mg-0.1Zr-0.1Ce Alloy

机译：热处理对Al-7.0Zn-1.5Cu-1.5mg-0.1Zr-0.1ce合金的微观结构和性能的影响
- 作者：Chu Jinhua;Lin Ting;Wang Guojing;Fang Hongjie;Wang Diangang
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第3期
- 7xxx Series aluminum alloy;
- Solution treatment;
- Homogenization heat treatment;
- Microalloying element;
36.Oxidation Behavior of Tungsten Carbide-6% Cobalt Cemented Carbide

机译：碳化钨-6％钴硬质合金的氧化行为
- 作者：C. Bagnall;J. Capo;W. J. Moorhead
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
- Cemented carbides;
- Oxidation behavior;
- Cobalt;
- Elevated temperature;
- Annular geometry;
37.Evolution of the Microstructure of Intermetallic Compounds Formed on Mild Steel During Hot Dipping in Molten Aluminum Alloy Baths

机译：熔融铝合金浴热浸渍期间在温和钢中形成金属间化合物的展现
- 作者：Kab Meriem;Mendil Sabrina;Taibi Kamel
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第4期
- Hot-dip aluminizing;
- Fe-Al intermetallic;
- Fe-Al-Si intermetallic;
- Diffusion;
- SEM;
- EDS;
38.Microstructural Evolution and Mechanical Behavior of Heat Treated Ti-6Al-4V Powders

机译：热处理Ti-6Al-4V粉末的微观结构演化与力学行为
- 作者：Venkata Satish Bhattiprolu;Grant A. Crawford
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
39.Role of Heat Treatment on Grain Refinement and Microhardness of 9Cr-1Mo-V-Nb Steel

机译：热处理对9Cr-1Mo-V-NB钢晶粒细化和微硬度的作用
- 作者：Chandan Pandey;S. Sirohi;M. M. Mahapatra
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第4期
- Grain refinement;
- P91 steel;
- Heat treatment;
- Microstructure;
- Hardness;
40.Phase Transformations in gamma-Aluminide, Ti-46.5Al-xNb-yCr-zMo-0.3B (x=3.5, 5;y,z=0, 1, 2;y plus z=2) Alloys

机译：γ-铝化物中的相变，Ti-46.5Al-XNB-YCR-ZMO-0.3b（x = 3.5,5; Y，Z = 0,1,2; Y加Z = 2）合金
- 作者：Neelam Naga Sruthi;Banumathy S.;Rao G. V. S. Nageswara;Singh A. K.;Bhattacharjee A.
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第3期
- Intermetallics;
- Phase transformation;
- Heat treatment;
- Aero-engine components;
41.Effect of Heat Input on Evolution of Microstructure and Tensile Properties of Gas Tungsten Constricted Arc (GTCA) Welded Inconel 718 Alloy Sheets

机译：热输入对气体钨钨（GTCA）焊接型号718合金薄片的微观结构和拉伸性能的效果
- 作者：Sonar Tushar;Balasubramanian V.;Malarvizhi S.;Venkateswaran T.;Sivakumar D.
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第3期
- Gas tungsten constricted arc (GTCA) welding;
- Inconel 718 alloy;
- Heat input;
- Tensile properties;
- Microstructure;
- Laves phase;
- Segregation;
42.Effect of Equal Channel Angular Rolling Process on the Fracture Mechanisms of AI-7057 and AI-5052 Alloys

机译：等沟角滚动过程对AI-7057和AI-5052合金裂缝机制的影响
- 作者：M. Honarpisheh;S. Saki Entezami;S. Akhavan
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第3期
- Fracture mechanics;
- Sever plastic deformation;
- ECAR process;
- Route effect;
43.Effect of Different Nitriding Temperature on Secondary Recrystallization of Hi-B Steel with an Element of Cu

机译：不同氮化温度对高-B钢二次重结晶与Cu元素的影响
- 作者：Fangyu Huang;Siqian Bao;Gang Zhao
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第1期
- Hi-B steel;
- Inhibitor;
- AGG;
- Nitriding technology;
- Secondary recrystallization;
44.Metallographic Studies of Dissimilar Al-Cu Laser-Welded Joints Using Various Etchants

机译：使用各种蚀刻剂的不同Al-Cu激光焊接接头的金相研究
- 作者：Pascal Schmalen;KarthikMathivanan;Peter Plapper
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第1期
- Laser welding;
- Etching routines;
- Optical microscopy;
- Aluminum;
- Copper;
- Intermetallic compounds;
45.Effect of SIMA Process on Microstructure and Wear Behavior of AI-Mg_2Si-3% Ni Composite

机译：SIMA工艺对AI-Mg_2SI-3％Ni复合材料微观结构和磨损行为的影响
- 作者：Hesam Pourfallah;Mohammad Shahmiri
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第1期
- Metal-matrix composite;
- SIMA process;
- Al-Mg_2Si Microstructure;
- Wear behavior;
46.Evaluation of Microstructural Characteristics in Alumina Produced by Selective Laser Stereolithography and Detonation Gun Spraying

机译：通过选择性激光立体光刻和爆轰喷枪喷涂产生氧化铝微观结构特征的评价
- 作者：Azarmi Fardad;Tangpong X. W.
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第4期
- Additive manufacturing;
- Laser stereolithography;
- Alumina;
- Detonation gun spraying;
- Microstructure;
47.Combined Effect of Gas Tungsten Arc Welding Process Variants and Post-Weld Heat Treatment on Tensile Properties and Microstructural Characteristics of Ti-6Al-4V Alloy Joints

机译：气体钨弧焊工艺变体和焊接后热处理的综合作用对Ti-6Al-4V合金接头拉伸性能和微观结构特性
- 作者：Vaithiyanathan V.;Balasubramanian V.;Malarvizhi S.;Petley Vijay;Verma Shweta
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第2期
- Ti-6Al-4V;
- GTCAW;
- High frequency;
- Microstructures;
- Tensile properties;
- PWHT;
48.IMS Journal Wants Your Input

机译：IMS期刊希望您的输入
- 作者：Ryan M. Deacon
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第3期
49.Corrosion Evaluation of Duplex and Superduplex Stainless Steel Friction Stir Welds Using Potentiodynamic Measurements and Immersion Tests in Chloride Environments

机译：使用电位动力学测量和氯化物环境中浸渍试验的双工和超德杂交不锈钢摩擦焊接的腐蚀评价
- 作者：Larissa A. Santa Cruz;Igor J. Marques;Severino L. Urtiga Filho
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第1期
- Duplex stainless steel;
- Superduplex stainless steel;
- Friction stir welding;
- Cyclic polarization;
- Weight loss;
- Deleterious phases;
50.Effect of Tool Traverse Speed on Strength, Hardness, and Ductility of Friction-Stir-Processed LM25AA-5% SiCp Metal Matrix Composites

机译：刀具横向速度对摩擦搅拌加工LM25AA-5％SICP金属基复合材料的强度，硬度和延展性的影响
- 作者：P. Vijayavel;V. Balasubramanian;I. Rajkumar
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第3期
- Metal matrix composites;
- Friction stir processing;
- Microstructure;
- Strength;
- Microhardness and ductility;
51.Effect of Applied Energy on the Microstructure, Texture, and Mechanical Properties of Short-Circuit Metal Inert Gas-Welded Modified Cr-Mo Steel Joints

机译：应用能量对短路金属惰性气焊改性CR-MO钢接缝的微观结构，质地和力学性能的影响
- 作者：S. Madhavan;M. Kamaraj;B. Arivazhagan
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第1期
- 9Cr-1Mo steel;
- Microstructure;
- Texture;
- Joint strength;
- Residual stress;
52.Can You Identify the Microstructure?

机译：你能识别微观结构吗？
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第2期
53.Effect of Copper on the Microstructure and Properties of Phosphorus Cast Iron for the Anode of Aluminum Electrolyzer

机译：铜对铝电解槽阳极磷铸铁微观结构和性能的影响
- 作者：Cheng-fu Han;Tian-xiang Wen;Tian-cong Chen;Wei-wei Ma;Yu-fu Sun
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
- Phosphorus Cast Iron;
- Copper;
- Resistivity;
- Thermal expansion coefficient;
54.Effects of Alloyed Fluxes on Spreading Behavior and Microstructures of Aluminum–Titanium TIG Brazing Interface

机译：合金通量对铝 - 钛钢管钎焊界面扩散行为和微观结构的影响
- 作者：Huan He;Chengge Wu;Zhihong Xie;Yongtao Liu;Wanghui Xu;Yan Jing
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第1期
55.Preventing Crack Formation at the Vicinity of the Fusion Zone in the Welding of Crane Rail Steel by Preheating Treatment

机译：通过预热处理防止起重机铁钢焊接附近的裂缝形成
- 作者：Faghfouri Mohammad;Ranjbar Khalil;Dehmolaei Reza;Kaloorazi Amir Hosseini
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第4期
- Crack formation;
- Crane rail steel;
- Preheating temperature;
- Shielded metal arc welding;
- Welding electrodes;
56.Correlation Between the State of Atomic Order in Selected (Ni–Mo–Cr)-Based Alloys and Their Corrosion Resistance

机译：基于选定（Ni-Mo-Cr）的原子顺序状态与其耐腐蚀性之间的相关性及其耐腐蚀
- 作者：H. M. Tawancy;L. M. Alhems
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
- Ni–Mo–Cr alloys;
- Corrosion;
- Atomic order;
- Microstructure;
- Deformation behavior;
57.Looking Forward to Portland!

机译：期待波特兰！
- 作者：Ryan M. Deacon
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第4期
58.The Formation of Iron-Containing Intermetallic Phases in Al-12%Si Alloy by Using Tungsten Addition

机译：通过使用钨加入形成Al-12％Si合金中的含铁金属间相
- 作者：Zykova A. P.;Chumaevskiy A. V
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第3期
- Aluminum alloys;
- Intermetallics;
- Microstructure;
- Phase transformations;
59.Can You Identify the Microstructure?

机译：你能识别微观结构吗？
- 作者：Hanke Larry;Borell Tim
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第3期
60.Mechanical and Microstructural Characteristics of Conventional and Robotic Gas Metal Arc Welded Low Carbon Steel Joints: A Comparative Study

机译：常规和机器人气金属弧焊低碳钢关节的机械和微观结构特性：比较研究
- 作者：Rajakumar S.;Kumar P. Vimal;Kavitha S.;Balasubramanian V
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第3期
- SAE 1022;
- Robotic GMAW;
- Conventional GMAW;
- "Y" Groove;
- Single-pass;
- Tensile strength;
- Elongation;
61.The Effect of the Plasma-Nitriding Process on the Structure and Wear Properties of the Sintered Low Alloy Steel

机译：等离子体氮化方法对烧结低合金钢结构和磨损性能的影响
- 作者：Mohamad Hasan Farazmand;Hamid Khorsand;Hossein Ebrahimnezhad-Khaljiri
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第6期
- Structure analysis;
- Wear;
- Powder metallurgy;
- Plasma nitriding;
62.Can You Identify the Microstructure?

机译：你能识别微观结构吗？
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第4期
63.Graphite Formation and Dissolution in Ductile Irons and Steels Having High Silicon Contents: Solid-State Transformations

机译：具有高硅内容的韧性铁杆和钢中的石墨形成和溶解：固态变换
- 作者：P. Rubin;R. Larker;E. Navara;M.-L. Antti
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第5期
- Graphitization;
- High silicon iron;
- High silicon steel;
- Machinability;
- Void formation;
- Ausferrite;
64.Automatic Measurement of Pearlite Spacing by Spectral Analysis

机译：光谱分析自动测量珠光体间距
- 作者：Matteis Paolo
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第2期
- Rail steel;
- Pearlite spacing;
- Automatic image analysis;
65.Can You Identify the Microstructure?

机译：你能识别微观结构吗？
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第1期
66.Influence of Cooling Process on Microstructure and Property of Low-Carbon V–N Micro-alloyed Medium and Heavy High-Strength Steel Plate

机译：冷却过程对低碳V-N微合金介质和重型高强度钢板微观结构和性能的影响
- 作者：Weijian Liu;Miao Zang;Zhixiu Zheng;Qiang Wang
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第4期
- V–N micro-alloyed;
- Medium and heavy plate;
- Microstructure;
- EBSD;
- Mechanical properties;
67.Metal Inert Gas (MIG)-Cold Metal Transfer (CMT) and Fiber Laser-MIG Hybrid Welds for 6005A T6: Experimental and Numerical Comparison

机译：金属惰性气体（MIG）-Cold金属转移（CMT）和光纤激光 - MIG混合焊接6005A T6：实验和数值比较
- 作者：Cornacchia Giovanna;Cecchel Silvia;Tocci Marialaura;Mazzu Angelo
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第4期
- Welding;
- Differential scanning calorimetry (DSC);
- FEM analysis;
- Aluminum alloy;
- Extrusion;
68.Can You Identify the Microstructure?

机译：你能识别微观结构吗？
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第5期
69.Multidirectional Forging of High-Leaded Tin Bronze: Evaluation of Corrosion Behavior in Aqueous NaCl Solution

机译：高铅锡青铜的多向锻造：NaCl水溶液中腐蚀行为的评价
- 作者：Rahul Gupta;Sanjay Srivastava;Sanjay K. Panthi;Nand Kishor Kumar
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第1期
- High-leaded tin bronze;
- X-ray diffraction;
- Electrochemical corrosion;
- Multidirectional forging;
70.Tribological Damage Characteristics of a Novel Low Carbon Steel Synthesized Through Intercritical Thermal Cycling

机译：跨临界热循环合成的新型低碳钢的摩擦损伤特性
- 作者：Amir Raza Subhani;Dipak Kumar Mondal;Joydeep Maity
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第5期
71.Let the Material Tell the Story

机译：让材料讲述这个故事
- 作者：Amber M. Dalley
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第5期
72.Influence of Superalloy Substrate Composition on the Oxidation Resistance of β-NiAl Diffusion Coating

机译：高温合金基材组合物对β - 尼径扩散涂层抗氧化性的影响
- 作者：H. M. Tawancy
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第1期
- Superalloys;
- Microstructure;
- Diffusion coatings;
- Intermetallics;
- Oxidation;
- Electron microscopy;
73.Processing and Characterization of Graphene and Multi-wall Carbon Nanotube-Reinforced Aluminium Alloy AA2219 Composites Processed by Ball Milling and Vacuum Hot Pressing

机译：石墨烯和多壁碳纳米管增强铝合金AA2219复合材料的加工和表征通过球磨和真空热压加工
- 作者：Lava Kumar Pillari;A. K. Shukla;S. V. S. Narayana Murty;V. Umasankar
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第4期
- AA2219 alloy;
- Graphene;
- MWCNT;
- Ball milling;
- Vacuum hot pressing;
74.Thixoformability Analysis of 355 Aluminum Alloy

机译：355铝合金的触角形态性分析
- 作者：Leandro Cássio de Paula;Gabriela Lujan Brollo;Cecília Tereza Weishaupt Proni;Eugênio José Zoqui
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第1期
- SSM processing;
- 355 alloy;
- Thixoformability;
- Thermodynamics;
- Microstructure;
- Apparent viscosity;
75.Oxidation Behavior of Thermally Grown Oxide on Aluminized Coating Irradiated by High-Current Pulsed Electron Beam

机译：高电流脉冲电子束照射铝化涂层的热生长氧化物的氧化行为
- 作者：Zhi-Yong Han;Wen-Xin Shi;Zhe Wang
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第5期
- High-current pulse electron beam;
- High-temperature oxidation behavior;
- Modification;
- Morphology;
76.Probing True Microstructure-Hardening Relationship in Simulated Heat Affected Zone of P91B Steels

机译：P91B钢模拟热影响区中探讨真实的微观结构 - 硬化关系
- 作者：Modassir Akhtar;Akhil Khajuria
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第5期
- Etchants;
- Simulated sub-HAZ;
- P91B steel;
- PAG hardening;
- PWHT;
77.Characterization of Thin Laminates Present Inside the Aluminum Extruded Tubes

机译：铝挤出管内存的薄层层的表征
- 作者：N. Akhtar;M. Afzal;K. M. Deen;Y. Khan;M. S. Awan
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第5期
- Aluminum alloy;
- Extrusion;
- Oxide film;
- XPS;
- inclusion;
78.The Effect of Boron on the Impact Energy of Low-Carbon Steel Weld Metal at Low Temperatures

机译：硼对低温低碳焊焊金属冲击能的影响
- 作者：Seyyed Reza Amirabadizade;Shamsodin Shafinia;Hamed Sabet;Shamsodin Mirdamadi;Hossein Ebrahimnezhad-Khaljiri
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第2期
- Carbon steel;
- Boron;
- Weld metal;
- Impact toughness;
- Acicular ferrite;
79.Effect of Welding Processes on Microstructure, Mechanical Properties, and Corrosion Behavior of Low-Nickel Austenitic Stainless Steels

机译：焊接工艺对低镍奥氏体不锈钢微观结构，力学性能和腐蚀行为的影响
- 作者：Ankur V. Bansod;Awanikumar P. Patil
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第4期
80.IMS Announces Winner of 2016 IMS Buehler Technical Paper Award

机译：IMS宣布赢得2016年IMS Buehler技术纸张奖
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第4期
81.Industrial Sintering Response and Microstructural Characterization of Aluminum Powder Metallurgy Alloy Alumix 123

机译：铝粉冶金合金Alumix 123的工业烧结响应与微观结构特征
- 作者：W. D. Judge;D. P. Bishop;G. J. Kipouros
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第5期
- Aluminum alloy;
- Powder metallurgy;
- Sintering;
- Sizing;
- Intermetallics;
- Alumix 123;
82.Determination of the Root Causes for Cracking in a Large-Size Cast Ingot of AISI 4317 Steel Using Microstructural Analysis

机译：使用微观结构分析，测定AISI 4317钢的大尺寸铸锭中裂解的根本原因
- 作者：Abdelhalim Loucif;Matthieu Bitterlin;Mohammad Jahazi;Rami Tremblay;Jean-Beno?t Morin;Louis-Philippe Lapierre-Boire
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第2期
- Cast ingot cracking;
- High-strength steel;
- Grain boundaries;
- Cooling rate;
- Carbides;
- Segregation;
83.Failure Analysis to Clarify Unambiguous Hydrogen Fracturing in Steels

机译：失效分析阐明钢中明确氢气压裂
- 作者：Michael Pohl
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第4期
- Hydrogen in steel;
- Hydrogen-induced failure;
- Hydrogen embrittlement;
- Fractography;
- Hydrogen collecting analysis;
84.Microstructure and Mechanical Properties of Heat-Treated 30CrMo Steels Produced by Compact Strip Production and Conventional Rolling Processes

机译：小型条带制造和常规轧制工艺生产热处理的30Crmo钢的微观结构和力学性能
- 作者：Huihui Huang;Gengwei Yang;Gang Zhao;Zhen Cai;Qilong Yin;Hang Yi
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第1期
- CSP process;
- CCR process;
- Heat treatment process;
- Martensite;
- Mechanical properties;
85.Microstructural and Mechanical Characterization of CNT- and Al 2O 3-Reinforced Aluminum Matrix Nanocomposites Prepared by Powder Metallurgy Route

机译：CNT-和Al <下标> 2 O <下标> 3 - 用粉末冶金途径制备的铝基质纳米复合材料的组织和力学表征
- 作者：Meysam Toozandehjani;Farhad Ostovan
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第6期
- Aluminum matrix nanocomposites;
- Ball milling;
- Powder metallurgy;
- Microstructure;
- Mechanical properties;
86.On the Role of Superlattice Structures with Ni_3X-type Composition in Selected Ni-Based Superalloys with Commercial Grades

机译：用商业等级中选择Ni的高温合物中Ni_3x型组合物的超晶格结构的作用
- 作者：H. M.Tawancy
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第5期
- Superlattices;
- Ni-based superalloys;
- Microstructure;
- Tensile strength;
- Electron microscopy;
87.Influence of Microstructural Features on the Mechanical Behavior of Incoloy 825 Welds

机译：微观结构特征对INGOLOY 825焊缝力学行为的影响
- 作者：Jalal Kangazian;Navid Sayyar;Morteza Shamanian
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第3期
- Non-dissimilar welding;
- Microstructural characterization;
- Ni-based superalloys;
- Mechanical properties;
88.Study on Hydrogen-Assisted Cracking in High-Strength Steels by Using the Granjon Implant Test

机译：用Granjon植入试验研究高强度钢中氢气辅助开裂的研究
- 作者：U. Yadav;C. Pandey;N. Saini;J. G. Thakre;M. M. Mahapatra
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第3期
- Hydrogen-assisted cracking;
- Lower critical stress;
- Heat-affected zone;
- Shielded metal arc welding;
- Implant test;
89.Segmentation of Lath-Like Structures via Localized Identification of Directionality in a Complex-Phase Steel

机译：通过局部识别在复合阶段钢中的定位识别岩板状结构的分割
- 作者：Mueller Martin;Stanke Gerd;Sonntag Ulrich;Britz Dominik;Muecklich Frank
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第5期
- Microstructure;
- Segmentation;
- Local orientation and direction analysis;
- Region growing;
- Steel;
- Bainite;
90.Effect of Annealing on the Microstructure and Mechanical Properties of a Low-Carbon Steel with Ultrafine Grains

机译：用超细晶粒进行退火对低碳钢微观结构和力学性能的影响
- 作者：Junyu Tian;Guang Xu;Weicheng Liang;Qing Yuan
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2017年第3期
- Ultrafine grain;
- Microstructure;
- Property;
- Cold rolling;
- Annealing;
91.Optimization of Hot Workability and Control of Microstructure in CF250 Grade Cobalt-Free Maraging Steel: An Approach Using Processing Maps

机译：CF250级钴游行钢中微观结构热可加工性的优化：一种使用加工地图的方法
- 作者：K. V. A. Chakravarthi;N. T. B. N. Koundinya;S. V. S. Narayana Murty;D. Sivakumar;B. Nageswara Rao
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第1期
- Activation energy;
- Cobalt-free maraging steel;
- Constitutive relation;
- Hot deformation;
- Processing map;
92.Dialogue with Emerging Engineers

机译：与新兴工程师的对话
- 作者：Chiesa Maya
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第5期
93.Artistic Entries from the 2017 International Metallographic Contest

机译：2017年国际金相竞赛的艺术条目
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第1期
94.Effects of Thermo-mechanical Process Parameters on Microstructure and Crystallographic Texture of High Ni–Mo Ultrahigh Strength Steel

机译：热机械工艺参数对高Ni-Mo超高强度钢组织和晶体纹理的影响
- 作者：G. Mandal;S. K. Ghosh;D. Chakrabarti;S. Chatterjee
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第2期
- Steel;
- Thermo-mechanical controlled processing;
- Texture;
- Precipitation;
- Impact toughness;
95.Friction Stir Spot Vibration Welding: Improving the Microstructure and Mechanical Properties of AI5083 Joint

机译：摩擦搅拌点振动焊接：改善AI5083关节的微观结构和机械性能
- 作者：Behrouz Bagheri;Ali Akbar Mahdian Rizi;Mahmoud Abbasi
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第5期
- Friction stir spot vibration welding;
- Finite element method;
- Microstructure;
- Mechanical analysis;
96.Failure Analysis of 304 Stainless Steel Components Used in Petrochemical Industry Applications

机译：石油化工工业应用中304种不锈钢组分的故障分析
- 作者：H. M.Tawancy
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2019年第5期
- 304 stainless steels;
- Metal gaskets;
- Pipes;
- Failure;
97.Bainite Transformation Characteristics of High-Si Hypereutectoid Bearing Steel

机译：高SI过度切开轴承钢的贝氏体转化特性
- 作者：Zhihui Chen;Jianfeng Gu;Lizhan Han
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第1期
- Bainite;
- Transformation kinetics;
- Incomplete transformation phenomenon;
- Carbon enrichment;
- Carbide precipitation;
98.2018 International Metallographic Contest (IMC) and Exhibit

机译：2018年国际金相竞赛（IMC）和展览
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第1期
99.Announcing the MMA 2017 Editor’s Choice Awards

机译：宣布MMA 2017编辑的选择奖
- 作者：Ryan M. Deacon
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2018年第2期
100.Microstructural and Mechanical Properties Evaluation of Tungsten Inert Gas-Welded 316 Stainless Steel and Pure Copper Joint

机译：钨惰性气体焊接316不锈钢和纯铜接头的微观结构和力学性能评价
- 作者：Thomas Naveen;Mathew A.;George Kurias;Thomas Noble;Thampi Sherin;Biradar Akash;Rijesh M.
- 期刊名称：《Metallography, Microstructure, and Analysis》 | 2020年第5期
- TIG welding;
- Copper;
- 316 stainless steel;
- Dissimilar joint;
- SEM;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号