首页>外文期刊>International Journal of Surface Science and Engineering

International Journal of Surface Science and Engineering

International Journal of Surface Science and Engineering

SCIEI

中文名称：国际表面科学杂志》上工程

ISSN：1749-785X
出版周期：Quarterly

发文量：316

期刊论文

年度选择

2023
- 第1期
- 第2期
2022
- 第1期
- 第2期
- 第3期
- 第4期
2021
- 第1期
- 第2期
- 第3期
- 第4期
2020
- 第1期
- 第2期
- 第3期
- 第4期
2019
- 第1期
- 第3期
- 第4期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第6期
2017
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2016
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2015
- 第1期
- 第3期
- 第4期
- 第5期
- 第6期
2014
- 第1期
- 第3期
- 第4期
2013
- 第1期
- 第2期
- 第3期
- 第4期
2012
- 第2期
- 第3期
- 第4期
2011
- 第1期
- 第3期
- 第4期
- 第6期
2010
- 第1期
- 第2期
- 第3期
- 第6期
2009
- 第2期
- 第3期
- 第4期
- 第6期
2008
- 第2期
- 第4期
- 第5期
- 第6期
2007
- 第1期
- 第4期

更多>>

全选（0）

1.Sliding interaction and wear studies between two hemispherical asperities based on finite element approach

机译：基于有限元方法的两个半球形凹凸之间的滑动相互作用和磨损研究
- 作者：S. Shankar;M. M. Mayuram
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第2期
- Asperity-asperity interaction;
- Finite Element Model;
- FEM;
- Elastic-plastic behaviour;
- Sliding process;
- Wear;
2.Nanoscratch behaviour, structure and nanoindentation of multilayer TiN/CrN coatings

机译：TiN / CrN多层涂层的纳米划痕行为，结构和纳米压痕
- 作者：Manohar S. Konchady;Sergey Yarmolenko;Devdas M. Pai;Jagannathan Sankar;Alexander V. Kvit
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第6期
- TiN/CrN nanolaminates;
- X-ray Diffraction;
- XTEM;
- Nanoindentation;
- Residual stress;
- Nanoscratch;
- Delamination;
3.When shot-peening does not enhance fatigue life of leaf springs

机译：喷丸不延长板簧的疲劳寿命时
- 作者：M. L. Aggarwal;R. A. Khan;R. K. Garg
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第4期
- Fatigue;
- Shot-peening;
- Specimen;
- Fretting fatigue;
4.Surface hardness changes in laser peened Friction Stir Welded 2195 and 7075 Aluminum Alloys

机译：激光喷丸摩擦搅拌焊接2195和7075铝合金的表面硬度变化
- 作者：Omar Hatamleh
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第2期
- Friction Stir Welding;
- FSW;
- Laser peening;
- Shot peening;
- Microhardness;
- 2195;
- 7075;
5.Effect of sinusoidal roughened surfaces on pressure in lubricating film

机译：正弦波粗糙表面对润滑膜压力的影响
- 作者：Leonid Burstein
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第2期
- Roughened surfaces;
- Lubricating film;
- Pressure distribution;
6.Effect of surfactants on the surface roughness, hardness and microstructure of electroless (Ni-P) coatings

机译：表面活性剂对化学镀（Ni-P）涂层的表面粗糙度，硬度和微观结构的影响
- 作者：R. Elansezhian;B. Ramamoorthy;P. Kesavan Nair
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第4期
- Surface roughness;
- Surface morphology;
- Hardness;
- Microstructure;
- Surfactants;
- SDS;
- Sodium dodecyl sulfate;
- CTAB;
- Cetyl trimethyl ammonium bromide;
- Electroless Ni-P coatings;
7.Evaluation of detonation gun sprayed alumina titania coatings

机译：爆轰枪喷涂氧化铝二氧化钛涂层的评价
- 作者：Pawan Kumar Sapra;Surendra Singh;Satya Prakash
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第5期
- Detonation gun;
- Al{sub}2O{sub}3-TiO{sub}2 coatings;
- EDX analysis;
8.Laboratory simulation of low-adhesion leaf film on rail steel

机译：轨道钢上低粘附性叶膜的室内模拟
- 作者：Gordana Vasic;Francis J. Franklin;Ajay Kapoor;Vojkan Lucanin
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第2期
- Low adhesion;
- Wheel-rail contact;
- Twin-disk tests;
- Leaf contamination;
9.Instrumented flat indentation on polyester nanocomposite coatings

机译：聚酯纳米复合材料涂层的仪器压痕
- 作者：Carmine Lucignano;Fabrizio Quadrini
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第5期
- Nanocomposites;
- Coating;
- Macro-indentation;
- Polyester resin;
- MMT;
- Montmorillonite;
10.Modelling of Fluidized Bed Degreasing (FBD) process by ANNs

机译：ANN对流化床脱脂（FBD）过程进行建模
- 作者：M. Barletta;A. Gisario;S. Guarino
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第4期
- FBD;
- Fluidized bed degreasing;
- Neural network;
11.Mechanical properties and fracture characteristics of cemented tungsten carbide with fine microstructure studied by nanoindentation

机译：纳米压痕法研究微细结构硬质合金的力学性能和断裂特性
- 作者：R. Irwan;H. Huang
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第2期
- Nanoindentation;
- Tungsten carbide;
- Elastic modulus;
- Hardness;
- Microstructure;
- Fracture characteristics;
12.Influence of roughness parameters of harder surface on coefficient of friction and transfer layer formation

机译：较硬表面粗糙度参数对摩擦系数和传递层形成的影响
- 作者：Pradeep L. Menezes;Kishore;Satish V. Kailas
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第2期
- Friction;
- Surface texture;
- Transfer layer;
- Roughness parameters;
- Sliding tests;
13.Synthesis and characterisation of Ti-C coatings with variable carbon content

机译：碳含量可变的Ti-C涂层的合成与表征
- 作者：L. Nobili;F. Pagano;P. L. Cavallotti
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第5期
- Magnetron sputtering;
- Hard coatings;
- TiC;
- Tribology;
- Self-lubrication;
- Wear rate;
- Water;
- Ti-C:H;
- Nanocomposite;
- FGM;
14.Mechanical and surface properties of Ti-sputtered thin films

机译：钛溅射薄膜的机械和表面性能
- 作者：G. Costanza;F. Mercuri;M. E. Tata
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第5期
- Al alloy;
- Al-MMC;
- Ti film;
- Sputtering;
- Mechanical properties;
- Intrinsic hardness;
- Surface roughness;
15.Surface roughness micro-deformation and transfer of bulk steel in hot rolling

机译：热轧中大块钢的表面粗糙度微变形和转移
- 作者：Z. Y. Jiang;J. Tang;A. K. Tieu;W. Sun;D. Wei
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第2期
- Surface roughness;
- Bulk steel;
- Oxide scale;
- Micro-deformation;
- Transfer;
- Hot rolling;
16.Electrochemical comparison between corrosion resistance of some thermally sprayed coatings

机译：某些热喷涂涂层的耐腐蚀性之间的电化学比较
- 作者：G. Bolelli;V. Cannillo;R. Giovanardi;L. Lusvarghi
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2008年第4期
- Impedance spectroscopy;
- Electroplating;
- Plasma spraying;
- HVOF;
- High velocity oxygen fuel;
- Electrochemical polarisation test;
17.Studies on the influence of surface texture on the performance of hydrodynamic journal bearing using power law model

机译：利用幂律模型研究表面织构对水动力轴颈轴承性能的影响
- 作者：S. Kango;Rajesh Kumar Sharma
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第6期
18.Properties of Ni-based self-lubricating composite

机译：镍基自润滑复合材料的性能
- 作者：Maoquan Xue
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第6期
- Ni-Cr based alloy;
- MoS_2;
- Friction;
- Wear;
- Alumina;
- Mechanical properties;
- Powder metallurgy;
- Surface;
19.Study on reduction of nano-fluctuations of aerostatic bearing with surface restriction

机译：有表面约束减少空气静压轴承纳米波动的研究
- 作者：Takakazu Kitagawa;Tomoko Hirayama;Takashi Matsuoka;Ryota Mizuno;Masato Kadotani;Hiroki Danjo;Katsumi Sasaki;Hiroshi Yabe
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第2期
- Aerostatic bearing;
- Pneumatic servo actuator;
- Thrust bearing;
- Nano-fluctuation;
- Surface restriction;
20.Polarisation resistance behaviour of corrosion inhibition of low carbon steel in H_3PO_4 acid

机译：低碳钢在H_3PO_4酸中缓蚀的耐极化性能
- 作者：Aprael S. Yaro;Anees A. Khadom
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第6期
- Current density;
- Stern and Geary equation;
- Polarisation resistance;
- Potassium iodide;
- Over potential;
- Surface science;
21.Fabrication and wear resistance of Ni-CeO_2 nanocomposite coatings by electrodeposition under ultrasound condition

机译：超声条件下电沉积制备Ni-CeO_2纳米复合涂层及其耐磨性
- 作者：Yu-Jun Xue;Ji-Shun Li;Wei Ma;Ming-De Duan;Ming-Ming Lan
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第3期
- Ni-CeO_2;
- Nanoparticles;
- Nanocomposite coating;
- Electrodeposition;
- Ultrasound;
- Microhardness;
- Wear resistance;
- Surface engineering;
- Crystal orientation;
22.Effect of coatings on the wearing resistance of steels for cold forging tools

机译：涂层对冷锻工具钢耐磨性的影响
- 作者：Cassio A. Suski;Rafael Gomes Konig;Carlos Augusto Silva de Oliveira
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第1期
- Abrasion;
- Metal forming;
- Trimming dies;
- Extrusion dies;
- Surface coatings;
23.On the ferro-graphic characterisation of wear debris in tribological system by grey fixed weight clustering

机译：灰色固定重聚类在摩擦学系统中磨损碎片的铁谱表征
- 作者：Xianguo Hu;Jian Zhou;Peng Huang
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第6期
- Wear;
- Debris;
- Grey fixed weight clustering;
24.Friction model selection in FEM simulations of aluminium extrusion

机译：铝挤压件有限元模拟中的摩擦模型选择
- 作者：L. Donati;L. Tomesani;M. Schikorra;N. Ben Khalifa;A. E. Tekkaya
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第1期
- Aluminium extrusion;
- Friction models;
- Visioplastic analysis;
- AA6060;
- FEM simulations;
25.Influence of bearing materials on plain bearing performance in low viscosity base oil lubrication

机译：轴承材料对低粘度基础油润滑中滑动轴承性能的影响
- 作者：Tadashi Katafuchi;Moritsugu Kasai;Tomomi Miyaji
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第2期
26.Wear and smearing resistance of black iron mixed oxide coated steels

机译：黑铁混合氧化物涂层钢的耐磨性
- 作者：A. Mihailidis;C. Salpistis;K. Panagiotidis;C. Sachanas;S. Gatsios;C. Hoffinger;V. Bakolas
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第6期
- Black iron mixed oxide coating;
- Durotect B;
- Bluing;
- Friction coefficient;
- Running-in;
- Wear rate;
- Smearing;
- Two discs test rig;
- Solid contact time percentage;
- Mixed lubrication;
- Surface coating;
27.Tribological characterisation of carbon nanotubes/ultrahigh molecular weight polyethylene composites: the effect of sliding distance

机译：碳纳米管/超高分子量聚乙烯复合材料的摩擦学表征：滑动距离的影响
- 作者：S. Kanagaraj;M. T. Mathew;A. Fonseca;M. S. A. Oliveira;J. A. O. Simoes;L. A. Rocha
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第6期
- Nanocomposites;
- Wear;
- Sliding distance;
- Ultrahigh molecular weight polyethylene;
- UHMWPE;
- Scanning electron microscopy;
- SEM;
- Atomic force microscopy;
- AFM;
- CNT;
- Surface;
28.The influence of surface enhancement by low plasticity burnishing on the surface integrity of steels

机译：低塑性抛光的表面增强对钢表面完整性的影响
- 作者：C. Y. Seemikeri;S. B. Mahagaonkar;P. K. Brahmankar
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第6期
- Low plasticity burnishing;
- LPB;
- Full factorial design;
- Surface integrity;
- Interaction effects;
- Steels;
29.A finite-element local mesh refinement model for treating mixed-lubrication in conrod bearings

机译：处理连杆轴承混合润滑的有限元局部网格细化模型
- 作者：Aurelian Fatu;Ingrid Riche;Dominique Bonneau
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第2期
- Mixed lubrication;
- Local refinement;
- Conrod;
- FEM;
- TEHD;
30.Deposition of Fe-based metallic glass coatings by Air Plasma Spraying process

机译：空气等离子喷涂工艺沉积铁基金属玻璃涂层
- 作者：Fuping Li;Jinshan Li;Hongchao Kou;Chaoping Jiang;Xiangyi Xue;Hengzhi Fu
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第3期
- Metallic glass coating;
- APS;
- Air plasma spraying;
- Microhardness;
- Corrosion resistance;
31.Elevated temperature solid particle erosion performance of Al_2O_3-3 wt% TiO_2 composite coatings

机译：Al_2O_3-3 wt％TiO_2复合涂层的高温固体颗粒侵蚀性能
- 作者：Pawan Kumar Sapra;Surendra Singh;Satya Prakash;M. R. Ramesh
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第6期
- Al_2O_3-3 wt TiO_2;
- Thermal spraying;
- Elevated erosion testing;
32.Preparation and characterisation of carbon nitride films deposited by pulsed laser arc deposition

机译：脉冲激光电弧沉积沉积氮化碳膜的制备与表征
- 作者：L. Yin;T. M. Shao;S. B. Wei;Y. Q. Zhou
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第3期
- Carbon nitride film;
- Pulsed laser arc deposition;
- Nanohardness;
- Friction coefficient;
33.On the variation of mechanical parameters obtained from spherical depth sensing indentation

机译：球形深度传感压痕获得的力学参数变化
- 作者：N. Oumarou;J.-Ph. Jehl;R. Kouitat;Ph. Stempfle
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第6期
- Nanoindentation;
- Film/substrate systems;
- Young's modulus;
- Hardness;
34.Tribological characteristics of polyethylene bearings of knee prostheses

机译：膝关节假体聚乙烯轴承的摩擦学特性
- 作者：Francis E. Kennedy;Douglas W. Van Citters;John P. Collier
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第2期
- Knee prostheses;
- UHMWPE;
- Ultra-high molecular weight polyethylene;
- Wear;
- Lubrication;
35.The biotribological behaviour researches on the α-tocopherol-doped and gamma-irradiated UHMWPE

机译：掺α-生育酚和γ射线辐照的UHMWPE的生物摩擦学行为研究
- 作者：Zifeng Ni;Shirong Ge
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第3期
- UHMWPE;
- Ultra-high molecular weight polyethylene;
- Biotribology;
- α-tocopherol;
- Cross-linking;
- Oxidation;
36.The utilisation of pin-on-disc simulative tests for the calibration of friction in mechanical processing of materials

机译：盘上模拟测试在材料机械加工中用于校准摩擦的利用
- 作者：Valentino A. M. Cristino;Pedro A. R. Rosa;Paulo A. F. Martins
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第1期
- Pin-on-disc;
- Friction coefficient;
- Mechanical processing;
- Surface texture;
- Roughness;
37.Low friction properties of nano-structured C-Ni films prepared by thermionic vacuum arc method

机译：热电子真空电弧法制备的纳米结构C-Ni薄膜的低摩擦性能
- 作者：C. P. Lungu;A. M. Lungu;P. Chiru;O. G. Pompilian;A. Tudor;R. Brescia
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第2期
- Thermionic vacuum arc plasma;
- Tribology;
- Friction;
- Plain bearings;
- TEM;
- Transmission electron microscopy;
38.Influence of surfactants on the tribological behaviour of electroless Ni-P coatings

机译：表面活性剂对化学镀Ni-P涂层的摩擦学性能的影响
- 作者：R. Elansezhian;B. Ramamoorthy;P. Kesavan Nair
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第3期
- Electroless coating;
- Wear;
- Friction;
- Surfactant;
- Hardness;
- SDS;
- Sodium dodecyl sulphate;
- CTAB;
- Cetyl trimethyl ammonium bromide;
- Tribology;
39.Microstructure, phase and microhardness distribution of laser-deposited Ni-based amorphous coating

机译：激光沉积Ni基非晶涂层的组织，相和显微硬度分布
- 作者：Chaoping Jiang;Jinshan Li;Hongchao Kou;Jiangbo Dai;Xiangyi Xue;Hengzhi Fu
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第3期
- Amorphous;
- Laser;
- Coating;
40.Influence of lubricants in deep drawing of thick steel sheets

机译：润滑剂对厚钢板深冲的影响
- 作者：Marco Fabricio Lopes Pereira da Silva;Sergio Tonini Button;Stefan Schlechtriem
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第1期
- Failure;
- Metal forming;
- Statistical analysis;
- Binary logistic regression;
41.Thermal and tribological study of a periodic contact under braking conditions

机译：制动条件下周期性接触的热学和摩擦学研究
- 作者：Monica Siroux;Anne-Lise Cristol-Bulthe;Yannick Desplanques;Bernard Desmet;Gerard Degallaix
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2010年第2期
- Railway braking;
- Tribometer;
- Periodic contact;
- Friction coefficient;
- Wear;
- Temperature;
42.Nanoindentation studies in NiTi films deposited on Si wafer

机译：在Si晶片上沉积的NiTi膜中的纳米压痕研究
- 作者：A. Kumar;Sudhir Kumar Sharma;Samir V. Kamat;S. Mohan
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第1期
- NiTi film;
- Nanoindentation;
- Shape memory effect;
- Recovery ratio;
43.A statistical analysis on the effect of cryogenic treatment on load bearing ability of interference fitted assemblies

机译：低温处理对过盈配合组件承载能力影响的统计分析
- 作者：Irappa Sogalad;N. G. Subramanya Udupa
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第3期
- Cryogenics;
- Load bearing ability;
- Statistical analysis;
- Interference fits;
44.Laser controlled melting of Haynes 188 alloy: surface with presence of TiC particles

机译：Haynes 188合金的激光控制熔化：表面存在TiC颗粒
- 作者：B. J. Abdul Aleem;M. S. J. Hashmi;B. S. Yilbas
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第6期
- Laser;
- Haynes 188;
- Surface;
- Titanium carbide;
- TiC;
45.Correlation of wear debris morphology and wear mechanism of Ti-5Al-4V-0.6Mo-0.4Fe slides against tungsten carbide under dry and cryogenic conditions

机译：在干燥和低温条件下，Ti-5Al-4V-0.6Mo-0.4Fe滑动件对碳化钨的磨损碎片形态与磨损机理的相关性
- 作者：T. C. Yap;N. S. M. El-Tayeb;P. V. Brevern;K. S. Sim
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第6期
- Analysis of wear debris;
- Wear test;
- Cryogenic cooling;
46.Prediction of distribution relationship of titanium surface topography created by abrasive waterjet

机译：磨料水射流产生的钛表面形貌分布关系的预测
- 作者：Sergej Hloch;Jan Valicek
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第3期
- Abrasive waterjet;
- AWJ;
- Surface topography;
- Titanium;
47.Comparison of rolling contact fatigue life using a mineral oil, a synthetic polyester and a compound of both of them

机译：使用矿物油，合成聚酯和两者的复合材料进行滚动接触疲劳寿命的比较
- 作者：J. E. Fernandez Rico;I. Minondo;D. Garcia Cuervo;R. Tucho
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第4期
- Rolling contact fatigue;
- Fatigue life;
- Tribology;
- Lubricants;
- Four ball test;
- Weibull;
- Infrared spectrum;
- Synthetic oil;
- Mineral oil;
48.Effect of porosity on the indentation behaviour of nanoporous alumina films

机译：孔隙率对纳米多孔氧化铝膜压痕行为的影响
- 作者：M. S. Bobji;Prashant Pendyala;Preeti Gupta;Pranav Kalode
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第1期
- Nanoporous alumina;
- NPA;
- Nanoindentation;
- Surface mechanical properties;
- Hardness;
49.Investigation of deformation behaviour and abrasive wear mechanism in nanomachining

机译：纳米加工中的变形行为和磨料磨损机理的研究
- 作者：Sumaiya Islam;Raafat Ibrahim
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第1期
- Nanomachining;
- Elastic recovery;
- Ploughing mechanism;
- Cutting mechanism;
- Abrasive wear;
50.Laser induced structural modification in Fe-Na-B glass samples investigated by advanced XPS technique

机译：先进XPS技术研究Fe-Na-B玻璃样品中的激光诱导结构改性
- 作者：Abdelkrim Mekki;Guldad Khan Khattak;Mohammed Ashraf Gondal
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第6期
- Material processing;
- X-ray photoelectron spectroscopy;
- XPS;
- Iron borate glasses;
- TM oxide glasses;
- Laser beam;
- Glass structures;
51.High temperature corrosion behaviour of HVOF-sprayed Ni-20Cr coating on boiler steel in molten salt environment at 900℃

机译：熔融盐环境中HVOF喷涂Ni-20Cr涂层在锅炉钢上的高温腐蚀行为
- 作者：G. Kaushal;H. Singh;S. Prakash
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第6期
- High temperature corrosion;
- Boiler environment;
- Protective coating;
- Oxide scales;
- Ni-20Cr;
- HVOF process;
52.Determination of the wear resistance of traditional ceramic tile glazes using a pin-on-disk tribometer

机译：用针盘摩擦计测定传统瓷砖釉料的耐磨性
- 作者：M. P. Gomez-Tena;J. Gilabert;J. Toledo;M. J. Ibanez;A. Munoz
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第4期
- Ceramic tiles;
- Wear;
- Pin-on-disk tribometer;
- Ceramic glaze;
- Porcelain tile;
- PEI method;
- Glaze microstructure;
- Roughness;
- Mechanical properties;
53.Influence of humidity on the tribological behaviour of W-alloyed C-based amorphous coatings

机译：湿度对W合金C基非晶涂层的摩擦学性能的影响
- 作者：Carlos Wagner Moura e Silva;Jose Roberto Tavares Branco;Albano Cavaleiro
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第4期
54.Inhibition of galvanic corrosion by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol

机译：4-氨基-5-苯基-4H-1、2,4-三唑-3-硫醇对电化学腐蚀的抑制作用
- 作者：Ahmed Y. Musa;Abdul Amir H. Kadhum;Mohd Sobri Takriff;Abu Bakar Mohamad
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第3期
- Galvanic corrosion;
- Corrosion inhibitor;
- Zero resistance ammeter;
- ZRA;
- Fourier transform infrared;
- FTIR;
55.Microstructure and adherence of vitreous enamel to low carbon steel

机译：玻璃搪瓷对低碳钢的组织和附着力
- 作者：Aiwen Zhang;Zhengyi Jiang;Sihai Jiao;Dongbin Wei
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第6期
- Vitreous enamel;
- Microstructure;
- Adherence;
- Interface morphology;
56.Nanotribology on individual phases of duplex steel: combining roughness, material effects, and friction

机译：双相钢各相的纳米摩擦学：结合粗糙度，材料影响和摩擦
- 作者：Satish Achanta;Jean-Pierre Celis;Pierre Ponthiaux;Dirk Drees
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第6期
- Dual phase steel;
- Lateral force microscopy;
- LFM;
- Nanotribology;
- Surface roughness;
- Derjaguin's model;
57.Controlled shot peening simulation for realistic impact pattern characterisation

机译：受控喷丸强化模拟，可真实地表征击球图案
- 作者：G. I. Mylonas;G. N. Labeas
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第6期
- Shot peening;
- SP;
- Shot stream simulation;
- Stochastic analysis;
- Representative patterns;
58.Laser treatment of alumina surfaces: the first and the second law analysis

机译：氧化铝表面的激光处理：第一定律和第二定律分析
- 作者：Bekir S. Yilbas;Ahmet Z. Sahin;S. Akhtar
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第3期
- Laser;
- Alumina;
- First law efficiency;
- Second law efficiency;
- Thermal stress;
59.Microabrasion resistance of nanostructured plasma-sprayed coatings

机译：纳米结构等离子喷涂涂层的耐微磨损性
- 作者：A. Ramalho;J. Rodriguez;A. Rico
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第4期
- Microabrasion;
- Nanostructure;
- Wear;
- Thermal-spray coatings;
60.Laser surface hardening: a review

机译：激光表面硬化：回顾
- 作者：P. Dinesh Babu;K. R. Balasubramanian;G. Buvanashekaran
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第3期
- Laser surface hardening;
- LSH;
- Micro hardness;
- Numerical analysis;
- Wear;
- Microstructure;
61.The role of lubricant feed temperature on the performance of twin groove journal bearings: an experimental study

机译：润滑剂进料温度对双槽轴颈轴承性能的影响：一项实验研究
- 作者：Francisco P. Brito;Antonio Sousa Miranda;Jose Carlos Pimenta Claro;Michel Fillon
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第4期
- Hydrodynamic lubrication;
- Journal bearings;
- Supply conditions;
- Feed conditions;
- Thermal behaviour;
- Feed temperature;
- T_f;
- Supply temperature;
62.Nanomechanical study of amorphous and polycrystalline ALD HfO_2 thin films

机译：非晶和多晶ALD HfO_2薄膜的纳米力学研究
- 作者：K. Tapily;J. E. Jakes;D. Gu;H. Baumgart;A. A. Elmustafa
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第3期
- Atomic layer deposition;
- ALD;
- Nanoindentation;
- High-k dielectrics;
- Modulus;
- Hardness;
- Hafnium oxide;
- HfO_2;
63.On the influence of indentation size effect on the wear of metallic alloys

机译：压痕尺寸效应对金属合金磨损的影响
- 作者：S. Graga;R. Colago
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第6期
- Abrasive wear;
- Indentation size effect;
- ISE;
- Modelling;
- Metallic alloys;
64.Friction behaviours of molybdenum-based coatings under fretting condition

机译：微动条件下钼基涂层的摩擦行为
- 作者：Kyungmok Kim
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第3期
- Friction behaviour;
- Molybdenum-based coating;
- Fretting condition;
- Mo-N;
- Fretting;
- Wear;
- Friction;
- Mo-MoS_2;
- Friction coefficient;
- MoS_2;
65.NiCrBSi coatings textured by Nd-YAG laser

机译：Nd-YAG激光织构的NiCrBSi涂层
- 作者：Alberto Higuera Garrido;Ruben Gonzalez;Modesto Cadenas;Jose Luis Viesca
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第3期
- Laser surface texturing;
- Laser cladding;
- Design of experiments;
- Central composite inscribed;
- CCI;
- NiCrBSi;
- Nd-YAG;
- Surface engineering;
66.Machining performance of laser surface micro-textured drilling tools

机译：激光表面微纹理钻孔工具的加工性能
- 作者：Milton Sergio Fernandes de Lima;Fabricio Prieto Ladario;Davi Neves;Anselmo Eduardo Diniz
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2011年第3期
67.Nanoscratch characteristics and interfacial adhesion energy of SiN/GaAs film/substrate bilayer systems

机译：SiN / GaAs薄膜/衬底双层系统的纳米划痕特性和界面粘附能
- 作者：Anshun He;Han Huang
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2013年第4期
- Thin film;
- Silicon nitride;
- SiN;
- Gallium arsenide;
- GaAs;
- Interface adhesion;
- Nanoscratch;
68.An in-house approach for fabrication of silicon nanowire arrays using electroless metal deposition and etching method

机译：使用化学沉积和蚀刻方法制造硅纳米线阵列的内部方法
- 作者：Purnima Hazra;Satyabrata Jit
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2013年第3期
- Ultrasonication;
- Electroless metal deposition and etching;
- EMDE;
- Silicon nanowire;
- SiNW;
- Silver nanoperticle;
- Surface morphology;
- Antireflection coating;
69.A focused review on nanoscratching-induced deformation of monocrystalline silicon

机译：纳米划痕引起的单晶硅变形的重点综述
- 作者：Yueqin Wu;Han Huang;Jin Zou
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2013年第1期
- Nanoscrathing;
- Deformation;
- Monocrystalline silicon;
- Transmission electron microscopy;
- Phase transformation;
- Amorphisation;
70.Characterisation and corrosion studies of cold sprayed copper coatings on ASTM B 435 alloy

机译：ASTM B 435合金上冷喷涂铜涂层的特性和腐蚀研究
- 作者：Tarun Goyal;T. S. Sidhu;R. S. Walia
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2013年第4期
- Cold spray;
- Coating;
- Copper;
- Nickel;
- Corrosion;
71.Micro abrasive wear resistance of FeSiNiCr alloy coating deposited by HVOF coating

机译：HVOF涂层沉积的FeSiNiCr合金涂层的耐微磨损性
- 作者：M. Shunmuga Priyan;P. Hariharan
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2013年第3期
- Micro abrasive wear test;
- Micro hardness;
- FeSiNiCr alloy;
- HVOF method;
72.The effectiveness of palm oil methyl ester as lubricant additive in milling and four-ball tests

机译：棕榈油甲酯在研磨和四球试验中作为润滑剂添加剂的有效性
- 作者：Willey Yun Hsien Liew;Sebastian Dayou;Jedol Dayou;Nancy J. Siambun;Mohd. Azlan Bin Ismail
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Steel;
- Lubricant additives;
- Cutting tools;
- Palm oil methyl ester;
- POME;
73.Mechanical and tribological performances of polypropylene composites containing multi-walled carbon nanotubes

机译：含多壁碳纳米管的聚丙烯复合材料的力学和摩擦学性能
- 作者：Dike Ali Sinan;Mindivan Ferda;Mindivan Harun
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第4期
- polymer composite;
- carbon nanotubes;
- CNTs;
- wear;
74.Investigations on the effects of surface texture on the performance of a porous journal bearing operating with couple stress fluids

机译：研究表面纹理对带有耦合应力流体的多孔轴颈轴承性能的影响
- 作者：Sharma Nitin;Kango Saurabh;Sharma Rajesh Kumar;Sunil
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第4期
- hydrodynamic lubrication;
- porous journal bearing;
- surface texturing;
- couple stress fluids;
- sinusoidal wave;
75.Friction and anti-wear property of aqueous tri-block copolymer solutions in metal forming

机译：三嵌段共聚物水溶液在金属成形中的摩擦磨损性能
- 作者：Buyung Kosasih;Oyong Novareza;Anh Kiet Tieu;Hongtao Zhu
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Anti-wear;
- Aqueous solutions;
- Cloud point;
- Friction;
- Tri-block copolymer;
76.A review of surface modification of a novel low modulus β-type titanium alloy for biomedical applications

机译：一种用于生物医学的新型低模量β型钛合金的表面改性研究进展
- 作者：Mitsuo Niinomi;Masaaki Nakai;Junko Hieda;Ken Cho;Toshihiro Kasuga;Tomokazu Hattori;Takashi Goto;Takao Hanawa
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Ti-29Nb-13Ta-4.6Zr;
- TNTZ;
- Surface modification;
- Hydroxyapatite;
- HAp;
- Segmented polyurethane;
- SPU;
- Osteoconductivity;
- Surface roughness;
77.Effect of pulse plasma nitriding on tribological properties of AISI 52100 and 440C steels

机译：脉冲等离子体氮化对AISI 52100和440C钢的摩擦学性能的影响
- 作者：Sukru Taktak;Ibrahim Gunes;Sukru Ulker
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第1期
- Pulsed plasma;
- Nitriding;
- Tribological properties;
- Wear rate;
- Friction coefficient;
- Unlubricated wear;
- Microhardness;
- Bearing steels;
78.Investigation of bacterial attachment on hydroxy apatite-coated titanium and tantalum

机译：羟基磷灰石涂层钛和钽上细菌附着的研究
- 作者：Kun Mediaswanti;Cuie Wen;Elena P. Ivanova;Christopher C. Berndt;Vy T. H. Pham;Francois Malherbe;James Wang
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Magnetron sputtering;
- Biomaterials;
- Titanium;
- Tantalum;
- Hydroxyapatite;
- Bacterial attachment;
- Thin films;
79.The mechanical behaviour of TiN and multi-layered coating of TiN/Ti on Ti6Al4V substrate during nano-indentation

机译：纳米压痕过程中TiN和Ti6Al4V衬底上TiN / Ti多层涂层的力学行为
- 作者：Yong Sun;Anh Kiet Tieu;Cheng Lu;Hailiang Yu;Yue Zhao;Hongtao Zhu;Charlie Kong;Kelvin Y. Xie
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Ti6Al4V;
- Surface;
- Nano-indentation;
- Crack;
- Multilayer;
80.Special Issue on Current Trends in Tribology in the Iberian Peninsula II

机译：伊比利亚半岛第二届摩擦学趋势专刊
- 作者：Monteiro Baptista Antonio Paulo
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第4期
81.Tool wear effect on micro end milling of biocompatible metals

机译：刀具磨损对生物相容性金属微细铣削的影响
- 作者：Yongho Jeon;Frank E. Pfefferkorn
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Micro end milling;
- Tool wear;
- Ti 6Al-4V;
- Stainless steel 316;
82.Effect of varying cashew dust and resin on friction material formulation: stability and sensitivity of mu to pressure, speed and temperature

机译：不同腰果粉和树脂对摩擦材料配方的影响：亩对压力，速度和温度的稳定性和敏感性
- 作者：Balaji M. A. Sai;Kalaichelvan K.
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第4期
83.Force relaxation and hysteresis in a frictionless superconducting magnetic bearing

机译：无摩擦超导磁轴承中的力松弛和磁滞
- 作者：Cristache Cristian;Diez-Jimenez Efren;Valiente-Blanco Ignacio;Alvarez-Valenzuela Marco A.;Sanchez-Garcia-Casarrubios Juan;Luis Perez-Diaz Jose
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第4期
- magnetic bearing;
- force relaxation;
- mechanical hysteresis;
- cryogenic applications;
- high speed bearings;
84.Effects of different treatments on the bond strength of titanium to porcelain

机译：不同处理方式对钛与瓷结合强度的影响
- 作者：Jianxue Li;Hong Yao;Hong Liu;Wenyan Tian;Dongyang Ma;Yan Guo
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第1期
- Microarc-oxidation;
- Bond strength;
- Titanium;
- Porcelain;
85.Effect of substrate roughness, time and temperature on the processing of iron boride coatings: experimental and statistical approaches

机译：基材粗糙度，时间和温度对硼化铁涂层加工的影响：实验和统计方法
- 作者：C. I. VillaVelazquez-Mendoza;J. L. Rodriguez-Mendoza;V. Ibarra-Galvan;R. P. Hodgkins;A. Lopez-Valdivieso;L. L. Serrato-Palacios;A. L. Leal-Cruz;V. Ibarra-Junquera
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第1期
- Iron borides;
- Substrate roughness;
- Carbon steel;
- Surface coating;
86.Effects of cobalt doping concentration on properties of zinc oxide films prepared by sol-gel

机译：钴掺杂浓度对溶胶-凝胶法制备氧化锌薄膜性能的影响
- 作者：Yuehui Hu;Defu Ma;Xinhua Chen;Yichuan Chen;Jun Chen
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第1期
- Cobalt doped ZnO films;
- Sol gel;
- Two dimensional Fourier transform;
- Structure and optical properties;
87.Predictive maintenance of a worm reducer with an unbalanced load

机译：负载不平衡的蜗杆减速器的预测维护
- 作者：Goncalves Aparecido Carlos;Paschoalini Amarildo Tabone;Bazani Marcio Antonio
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第4期
- predictive maintenance;
- oil analysis;
- vibration analysis;
- tribology;
- wear;
88.Parametric study of surface melting in zinc-aluminium coated steels

机译：锌铝涂层钢表面熔化的参数研究
- 作者：Remya Mathew;Paul R. Stoddart;David Nolan;Yvonne Durandet
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Parametric study;
- Zinc-aluminium coatings;
- Laser surface melting;
- LSM;
- Microstructures;
89.Molecular dynamics simulation of confined n-alkanes: ordered structure and crystalline bridges

机译：受限正构烷烃的分子动力学模拟：有序结构和结晶桥
- 作者：Xuan Zheng;Hongtao Zhu;Anh Kiet Tieu;Kuiyu Chen
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Molecular dynamics simulation;
- N-alkanes;
- Thin film lubrication;
90.Tungstate ion-assisted hydrothermal conversion of magnesium hydroxide coatings on AZ31 magnesium alloy

机译：AZ31镁合金上钨酸盐离子辅助氢氧化镁涂层的水热转化
- 作者：Yongsheng Wang;Ming-Jen Tan;Beng Wah Chua;Bayraktar Emin
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Coating;
- Tungstate;
- Magnesium hydroxide;
- Hydrothermal;
- Mg alloys;
91.Study on micro-surface texture and tribology characters of ground surface in point grinding process

机译：点磨过程中地表微观表面织构与摩擦学特性的研究
- 作者：Xiu Shichao;Liu Minghe;Chao Caixia;Li Shujun
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Micro-surface texture;
- Tribology;
- Point grinding;
- Surface science and engineering;
- Surface roughness;
92.Analysis of different multiaxial fatigue criteria in the prediction of pitting failure in spur gears

机译：齿轮正点蚀预测中不同多轴疲劳准则的分析
- 作者：de la Guerra Ochoa Eduardo;Echavarri Otero Javier;Chacon Tanarro Enrique;Lafont Morgado Pilar;Manuel Munoz-Guijosa Juan;Diaz Lantada Andres;Munoz Sanz Jose Luis
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第4期
- fatigue design;
- spur gears;
- multiaxial fatigue;
- contact stresses;
- high cycle fatigue;
- HCF;
- rolling contact fatigue;
- Crossland criterion;
- Dang Van criterion;
- Liu-Mahadevan criterion;
- pitting;
- surface fatigue;
93.Effects of oxide scale on hot rolling of an austenitic stainless steel

机译：氧化皮对奥氏体不锈钢热轧的影响
- 作者：Xiawei Cheng;Zhengyi Jiang;Dongbin Wei
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Hot rolling;
- Oxide scales;
- Surface roughness;
- Rolling friction;
- Stainless steel;
94.Assisted nitriding of Inconel alloy: microstructural analysis

机译：铬镍铁合金的辅助氮化：显微组织分析
- 作者：Bekir Sami Yilbas
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Laser;
- Inconel 625;
- Surface treatment;
- TiC;
95.Experiment and numerical simulation of laser shock micro dents

机译：激光冲击微凹痕的实验与数值模拟
- 作者：Huixia Liu;Zhihui Huang;Chunxing Gu;Zongbao Shen;Xiao Wang
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第1期
- Laser shock processing;
- LSP;
- Laser shock surface texturing;
- Micro dents;
- Bulges;
96.Development of AlTiN coated carbide bandsaw for machining titanium-17 alloy

机译：用于加工钛17合金的AlTiN涂层硬质合金带锯的开发
- 作者：Fahd N. Khan;Ali Daadbin;Martin Persson;Julfikar Haider
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第1期
- Carbide tipped bandsaw;
- Bandsawing;
- Ti-17 alloy;
- AlTiN coating;
- Wear;
- Specific cutting energy;
97.Testing and FEA as prediction strategies on the ball bearings behaviour

机译：测试和有限元分析作为预测球轴承性能的策略
- 作者：Lates Mihai-Tiberiu;Velicu Radu;Papuc Radu
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第4期
- ball bearing;
- contact pressure;
- FEA;
- tribometer;
- friction;
98.Mechanical and tribological characteristics of sintered Fe-Ni-Cr alloy subjected to high-frequency ultrasonic peening

机译：高频超声喷丸烧结Fe-Ni-Cr合金的力学和摩擦学特性
- 作者：Jong-Deok Kim;In-Sik Cho
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Direct metal laser sintering;
- DMLS;
- Hot isostatic pressing;
- HIP;
- Ultrasonic peening;
- Friction;
- Wear;
- Scratch;
- Fe-Ni-Cr alloy;
99.Microstructure, bioactivity and wear resistance of sintered composite Co-Cr-Mo/Bioglass for medical implant applications

机译：医用复合植入烧结钴铬钼/生物玻璃复合材料的微观结构，生物活性和耐磨性
- 作者：Feng Cai;Colin Miyata;Xiao Huang;Qi Yang
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第3期
- Plasma spraying;
- Sintering;
- Composite;
- Microhardness;
- Wear;
- Bioactivity;
100.Corrosion resistance of tungsten carbide-based cermet coatings formed by sinter-brazing

机译：烧结钎焊形成的碳化钨基金属陶瓷涂层的耐蚀性
- 作者：Joo Hyung Goun;Zhang Da Quan;Gao Li Xin;Liu Tao;Lee Kang Yong
- 期刊名称：《International Journal of Surface Science and Engineering》 | 2014年第4期
- brazing;
- corrosion;
- cladding coatings;
- electrochemical polarisation;
- tungsten carbide;
- surface science;

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有出版物经营许可证

客服微信
服务号