首页>外文期刊>International journal of mechanical and production engineering research and development

International journal of mechanical and production engineering research and development

中文名称：国际期刊的机械和生产工程研究和开发

ISSN：2249-6890
出版周期：Semiannual

发文量：97

期刊论文

热门论文

年度选择

2022
- 第1期
- 第2期
2021
- 第1期
- 第2期
2020
- 第1期
- 第2期
2019
- 第1期
- 第2期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2017
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2016
- 第1期
- 第2期
- 第3期
- 第4期
2015
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2014
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期

更多>>

全选（0）

1.AN INVESTIGATION OF OXY-FUEL CUTTING OF MILD STEEL USING PRINCIPLE COMPONENT ANALYSIS AND TAGUCHI TECHNIQUE

机译：用原理成分分析和塔努奇技术研究轻钢氧燃料切割
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Mild steel;
- Principal component analysis;
- ANOVA amp;
- kerf;
2.EVALUATION OF CRITICAL SUCCESS FACTORS FOR SIX SIGMA IMPLEMENTATION IN INDIAN MANUFACTURING SMES

机译：评估印度制造中小企业六西格玛实施的关键成功因素
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Six sigma;
- CSFs;
- Indian manufacturing SMEs amp;
- factor analysis;
3.AN EXPERIMENTAL INVESTIGATION ON MECHANICAL BEHAVIOUR OF SiCp REINFORCED Al 6061 MMC USING SQUEEZE CASTING PROCESS

机译：SICP加固Al 6061 MMC使用挤压过程的实验研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Aluminium 6061;
- SiC;
- Squeeze casting technique;
- MMC;
- Volume fraction amp;
- mechanical characterization;
4.OPTIMIZING SUPPLY CHAIN IN REVERSE LOGISTICS

机译：优化逆向物流供应链
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Disassembly;
- Remanufacturing;
- Reverse logistics amp;
- supply chain planning;
5.APPLICATION OF ARCS MODEL AND MOTIVATIONAL DESIGN IN ENGINEERING SUBJECTS - A CASE STUDY

机译：电弧模型和励志设计在工程学科的应用 - 以案例研究
- 作者：ALEKHYA N.;N. PRABHU KISHORE
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2018年第1期
- ARCS Model;
- Motivational Design amp;
- Engineering Students;
6.DMATM: DUAL MODIFIED ADAPTIVE TECHNIQUE BASED MULTIPLIER

机译：DMATM：基于双修改的自适应技术的乘法器
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- K cycles are required;
- 32-bit by 32-bit multiplications;
- reduces the delay;
7.CORROSION BEHAVIOUR OF Mg-Zr ALLOY IN STIMULATED BODY FLUID

机译：Mg-ZR合金在刺激体液中的腐蚀行为
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Magnesium alloy;
- Corrosion;
- Bio-Medical;
- Bone implants amp;
- stimulated body fluid;
8.NATURAL FREQUENCY ESTIMATION FOR UNSYMMETRIC CROSS SECTION OF A TYPICAL CYLINDRICAL SHELL

机译：典型圆柱壳的非对手横截面的固有频率估计
- 作者：A. BARA;BABITHA KODAVANLA;NILOUFER;E. RUTH;M. SATYANARAYANA GUPTA
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2018年第2期
- ANSYS;
- MATLAB amp;
- Frequencies;
9.RAW MATERIAL CAPTCHA SECURITY APPLIED THROUGH ZOPFIA TECHNIQUE

机译：通过Zopfia技术应用原料CAPTCHA安全性
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Raw material;
- Captcha security;
- Data compression amp;
- zopfli captcha security;
10.DESIGN AND IMPLEMENTATION OF THE SMART FIRE EXTINGUISHER SYSTEM

机译：智能灭火器系统的设计与实现
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Fire extinguisher;
- MCU;
- Sensor;
- Motor amp;
- motion;
11.OPTIMIZATION OF PARAMETERS FOR RECYCLING OF STEEL PROCESS BY GREY TAGUCHI TECHNIQUE

机译：灰色Taguchi技术优化钢工艺回收参数
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Steel recycling;
- Grey taguchi;
- GRC amp;
- GRG;
12.DESIGN AND EXPERIMENTAL ANALYSIS OF HELICAL SUSPENSION SPRING WITH DIFFERENT MATERIALS

机译：不同材料螺旋悬架弹簧的设计与实验分析
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Helical suspension springs;
- Finite element analysis;
- Static analysis amp;
- experimental analysis;
13.EXPERIMENTAL INVESTIGATION OF FLEXURAL AND HARDNESS BEHAVIOUR OF HEMP FLAX HYBRID COMPOSITE

机译：大麻亚麻杂交复合材料弯曲和硬度行为的实验研究
- 作者：S. SHARAVANAN;B. VIJAYA RAMNATH;M. CHANDRASEKARAN;S. RAJESH
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2018年第2期
- Flax Fiber;
- Hemp Fiber;
- Hybrid Composite amp;
- Mechanical Testing;
14.DESIGN AND ANALYSIS OF CAR CHASSIS

机译：汽车底盘的设计与分析
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Chassis design;
- ANSYS;
- Impact forces;
- Matlab;
- Taguchi method;
15.EVALUATION OF MECHANICAL PROPERTIES OF E-GLASS AND COCONUT FIBER REINFORCED WITH POLYESTER AND EPOXY RESIN MATRICES

机译：聚酯和环氧树脂基质加固E-玻璃和椰子纤维力学性能的评价
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Aerospace;
- Stiffness;
- Weight percentage;
- Microstructural study amp;
- morphological features;
16.OPTIMIZATION OF CNC TURNING PARAMETERS FOR AL-6061 USING RESPONSE SURFACE METHODOLOGY

机译：使用响应表面方法优化AL-6061的CNC转向参数
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- CNC turning machine;
- Aluminium 6061;
- Minitab;
- Material removal rate amp;
- surface roughness;
17.PARAMETRIC ANALYSIS OF A CONCENTRATED SOLAR RECEIVER WITH SCHEFFLER REFLECTOR

机译：用舍克弗勒反射器的集中太阳能接收机参数分析
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Solar receiver;
- Parabolic dish;
- Surface absorption;
- Convection amp;
- radiation heat losses;
18.EFFECT OF CHEVRON ON THE DECAY CHARACTERISTICS OF COMPRESSIBLE ROUND JET

机译：雪锐龙对可压缩圆射流衰减特性的影响
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Chevron nozzle;
- Noise suppression techniques;
- Subsonic jets amp;
- jet decay;
19.EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS IN Al_2O_3 - WATER BASED NANOFLUIDS OPERATED SHELL AND TUBE HEAT EXCHANGER WITH AIR BUBBLE INJECTION

机译：AL_2O_3 - 水基纳米流体经营壳管热交换器传热特性的实验研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Shell and tube heat exchanger;
- Al_2O_3/Water based nanofluids;
- Effectiveness amp;
- heat transfer rate;
20.STUDIES IN SURFACE FINISHING OF INCONEL718 FLAT SURFACE WITH MAGNETIC ABRASIVE FINISHING

机译：用磁力磨料精加工的Inconel718平面表面精加工研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Magnetic abrasive finishing;
- Inconel718;
- Surface finish amp;
- ferro-Magnetic abrasive particles;
21.DESIGN AND THERMO STRUCTURAL STRESS ANALYSIS OF AXIAL FLOW GAS TURBINE BLISK

机译：轴流燃气轮机闪烁的设计与热结构应力分析
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Turbine blades;
- Inconel 718 and CMSX-4 amp;
- turbine blisk;
22.DEVELOPMENT COMPARISONS OF AL-SiC MMC USING STIR CASTING PROCESS AND POWDER METALLURGY PROCESS FOR AUTOMOTIVE INDUSTRIES

机译：AL-SIC MMC使用搅拌铸造工艺和粉末冶金工业的发展比较
- 作者：CHIRAG PRAHLADBHAI PATEL;MANGAL BHATT
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2019年第2期
23.MODEL ORDER REDUCTION OF BOLTING AND FEASIBILITY EVALUATION

机译：螺栓和可行性评估的模型顺序减少
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Plane stress;
- Model order reduction amp;
- contact pressures;
24.ENGINE PERFORMANCE AND EMISSION CHARACTERISTICS OF 1-OCTANOL BLENDED BIO-DIESEL IN A SINGLE CYLINDER DIESEL ENGINE

机译：单缸柴油发动机中1-辛醇混合生物柴油的发动机性能和排放特性
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Biodiesel;
- C.I engine;
- Additive amp;
- 1-Octanol;
25.A REVIEW ON PERFORMANCE ENHANCEMENT OF SOLAR AIR HEATER

机译：太阳能空气加热器性能增强综述
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Solar collectors;
- Obstacles;
- Fins;
- Heat loss;
- Baffles;
- Thermal efficiency;
- Exergy;
- Etc;
26.EXPERIMENTAL INVESTIGATION AND DESIGN OPTIMIZATION OF FACE MILLING PARAMETERS ON MONEL K-500 BY DOE CONCEPT

机译：DOE概念在Monel K-500上脸铣削参数的实验研究优化
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Face milling;
- Monel;
- Milling parameters;
- Surface roughness amp;
- optimization;
27.REVIEW ON THE CHARACTERISTICAL BEHAVIOR OF ADVANCED 3D SPACER COMPOSITES

机译：高级3D间隔复合材料的特性行为综述
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- 3D woven spacer fabrics;
- Hybrid yarns;
- Interlock fabrics;
- Mechanical properties;
- Multilayered structures amp;
- twisting;
28.FABRICATION AND CHARACTERIZATION OF COPPER GRAPHITE COMPOSITE MATERIAL

机译：铜石墨复合材料的制造与表征
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Composite material;
- Copper;
- Graphite amp;
- metal matrix composite;
29.RADIATION ABSORPTION EFFECTS ON UNSTEADY MHD FLOW OF RADIATIVE AND CHEMICALLY REACTING FLUID PAST A POROUS PLATE WITH VARIABLE SUCTION AND CONCENTRATION

机译：辐射吸收对辐射和化学反应流体的非稳态MHD流动，通过可变抽吸和浓缩的多孔板
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- MHD;
- Unsteady;
- Chemical reaction;
- Radiation absorption amp;
- skin-Friction;
30.CHARACTERIZATION AND EVALUATION OF VARIOUS MATERIALS FOR AUTOMOBILE COMPONENTS

机译：汽车成分各种材料的特征与评价
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Materials;
- Automobile;
- Mechanical properties;
- Specimens amp;
- testing;
31.EXPERIMENTAL INVESTIGATION ON INFLUENCE OF PROCESS PARAMETERS IN SELECTIVE LASER SINTERING ON ROUNDNESS USING TAGUCHI MEDTHOD

机译：使用Taguchi Medthod对圆形选择性激光烧结的过程参数影响的实验研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Additive manufacturing;
- 3D model;
- Rapid prototyping machine;
- Orthogonal array;
- ANOVA;
- S/N ratio;
- Sintering;
- PA2200;
- CMM;
- Tolerance;
32.IMPACT OF ENGINE EMISSIONS FROM HCCI ENGINE: AN OVERVIEW

机译：HCCI发动机发动机排放的影响：概述
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Combustion;
- Chemical;
- HCCI;
- amp;
- ignition;
33.STUDY OF PERFORMANCE AND EMISSION ANALYSIS OF DUAL BIODIESEL FUELLED ON LHR DIESEL ENGINE SUPPORTED BY EGR SYSTEM

机译：EGR系统支持的LHR柴油机推动双生物柴油的性能和排放分析研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
34.AERO-STRUCTURAL OPTIMIZATION OF AIRCRAFT WING BY FINITE ELEMENT METHOD

机译：有限元法通过机翼的航空结构优化
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Aircraft wing optimization;
- Modeling and simulation;
- Finite element method;
- amp;
- ANSYS;
35.PREDICTION OF NATURAL FREQUENCIES OF THICK CIRCULAR PLATES USING FINITE ELEMENT ANALYSIS

机译：利用有限元分析预测厚圆形板的自然频率
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Thick plate;
- Free vibration;
- Finite element amp;
- three-Dimensional analysis;
36.FRICTION SURFACING OF STAINLESS STEEL ON LOW CARBON STEEL FOR CORROSION RESISTANCE APPLICATION-AN EXPERIMENTAL APPROACH

机译：低碳钢对低碳钢的摩擦衬底耐腐蚀应用 - 一种实验方法
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Friction welding;
- Friction surfacing;
- Low carbon and stainless steel;
37.OPTICAL AND THERMAL PERFORMANCE ANALYSIS OF SOLAR PARABOLIC CONCENTRATOR

机译：太阳能抛物型集中器的光学和热性能分析
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Optical efficiency;
- Concentration ratio;
- Parabolic dish;
- Absorber coatings;
- Reflectivity amp;
- absorptivity;
38.AN EXPERIMENTAL STUDY OF AEROSPACE MATERIAL DURING FABRICATION OF V GROOVE USING WEDM

机译：采用WEDM制造V沟程期间航空航天材料的实验研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- WEDM;
- Cryogenic;
- Inconel-625;
- Taguchi;
- MRR amp;
- SR;
39.OPTIMIZING PROCESS PARAMETERS OF NANO SIC REINFORCED AA6061 COLD EXTRUSION USING RESPONSE SURFACE METHOD

机译：响应面法优化纳米SiC增强AA6061冷挤压工艺参数
- 作者：A. VIJAY KUMAR;CH. RATNAM;V. V. S. KESAVA RAO
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2019年第1期
- Extrusion;
- AA 6061;
- Nano sic;
- Response surface method;
- Contour plots amp;
- surface plots;
40.EFFECT OF PASSIVES ON THE PERFORMANCE OF A CENTRIFUGAL COMPRESSOR

机译：无源对离心式压缩机性能的影响
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Centrifugal compressor;
- Spacers;
- Passives amp;
- tips clearance;
41.CYCLE TIME OPTIMIZED PATH PLANNING FOR INDUSTRIAL ROBOT USING ROBOMASTER

机译：使用Robomaster的工业机器人的周期时间优化路径规划
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Cycle time;
- Industrial robot;
- Path planning;
- Robomaster and workspace;
42.EXPERIMENTAL INVESTIGATION ON THE PERFORMANCE AND EMISSION CHARACTERISTICS OF DI-DIESEL ENGINE USING DIESEL - ETHANOL BLENDS AND ALUMINIUM OXIDE NANO PARTICLES

机译：柴油 - 乙醇共混物和氧化铝纳米颗粒二柴油发动机的性能和排放特性的实验研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- 4 stroke single cylinder diesel engine;
- Ethanol;
- Diesel;
- Nano particles;
- Performance amp;
- emissions;
43.GLOBAL FORM DEVIATION EVALUATION OF FREE-FORM SURFACE, USING COORDINATE MEASURING MACHINE

机译：使用坐标测量机的自由形式的全局形式偏差评估
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Coordinate measuring machine;
- Form deviation;
- Free-Form surface amp;
- sampling strategy;
44.A COMPARATIVE STUDY BETWEEN THE SUCCESSIVE SCREW DISPLACEMENT AND QUATERNION BASED METHODS USED IN FORWARD KINEMATICS OF SERIAL ROBOT MANIPULATOR

机译：串行机器人操纵器前向运动学中使用的连续螺杆位移和四元数的比较研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Forward kinematic;
- Successive displacement amp;
- robot manipulator;
45.EVOLUTION OF A NEW HYBRID BIO COMPOSITE AND EVALUATION OF ITS MECHANICAL PROPERTIES

机译：新型杂交生物复合材料的演变与其机械性能评价
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Non-Biodegradable;
- Natural fibers;
- Banana;
- Sisal;
- Composites;
- Epoxy resin amp;
- hand layout technique;
46.OPTIMISATION OF FUEL CONSUMPTION BY TAGUCHI METHOD IN LOGISTICS SYSTEMS

机译：物流系统中TAGUCHI方法的燃料消耗优化
- 作者：BENRAJESH. P.;JOHN RAJAN. A.
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2019年第1期
- Fuel consumption;
- Taguchi method;
- Logistics service providers (LSP);
- Green logistics amp;
- sustainability;
47.MODEL ORDER REDUCTION AND LINEAR QUADRATIC REGULATOR CONTROLLER DESIGN, ON A LARGE SCALE LINEAR TIME INVARIANT SYSTEM

机译：模型顺序减少和线性二次调节器控制器设计，在大规模线性时间不变系统上
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Higher order system;
- Reduced order model;
- Linear amp;
- quadratic regulator;
48.PRELIMINARY STUDY OF FRICTIONAL POWER LOSSES IN SPUR GEARED TRANSMISSIONS

机译：摩擦动力损耗在齿轮齿轮传动中的初步研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Spur gear;
- Line of action;
- Sliding velocity;
- Coefficient of friction sliding power losses;
49.PASSIVE CONTROL OF BASE DRAG IN COMPRESSIBLE SUBSONIC FLOW USING MULTIPLE CAVITY

机译：多腔的可压缩子流量基础拖动的被动控制
- 作者：SHER AFGHAN KHAN;MOHAMMAD ASADULLAH;FHARUKH AHMED G. M.;AHMED JALALUDDEEN;MAUGHAL AHMED ALI BAIG
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2018年第2期
- Wall Pressure;
- Base Flows;
- Cavity;
- Mach number amp;
- Square Duct;
50.THE REALIZATION OF THIN SHEETS STAMPING TOOLS WITH AN ECONOMICAL MATERIAL

机译：实现具有经济材料的薄板冲压工具
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Stamping;
- High performance concrete;
- Wear;
- Surface finish amp;
- hardness;
51.CFD ANALYSIS OF HYDRODYNAMIC STUDIES OF A BUBBLING FLUIDIZED BED

机译：鼓泡流化床流体动力学研究的CFD分析
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Computational fluid dynamics (CFD);
- Bubbling character;
- Air velocity amp;
- volume fraction;
52.DESIGN AND ANALYSIS OF TWO THROAT WIND TUNNEL

机译：两个喉咙风洞的设计与分析
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- CFD;
- Design;
- Grid;
- MOC;
- Mach number;
- Start-Up amp;
- wind tunnel;
53.VIBRATION ANALYSIS OF COMPOSITE LAMINATED PLATES USING HIGHER ORDER THEORY AND LEVY'S SOLUTION

机译：高阶理论和征含液体溶液复合层压板的振动分析
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Laminated composite plate;
- Vibration analysis;
- Levy's solution amp;
- higher order theory;
54.CORROSION FATIGUE OF WELDED JOINTS IN MARINE AND NAVAL STRUCTURES: A REVIEW

机译：海岸和海军结构焊接关节腐蚀疲劳：综述
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
55.OPTIMIZATION OF PLATEN FOR INJECTION MOULDING MACHINE BY GREY RELATIONAL ANALYSIS

机译：灰色关系分析注塑机的塑料压板优化
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Introduction to injection moulding machine;
- Design of experiment;
- Minitab amp;
- greyralational analysis;
56.OPTIMIZATION OF MACHINING PARAMETERS IN WIRE EDM OF EN24 STEEL

机译：EN24钢丝钢丝电气加工参数的优化
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- WEDM;
- MRR;
- Ra;
- Grey-Taguchi amp;
- ANOVA;
57.ENHANCEMENT OF HEAT TRANSFER IN SHELL AND TUBE HEAT EXCHANGER BY USING NANO FLUID

机译：用纳米液体增强壳管热交换器中的热传递
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Effectiveness;
- Heat transfer;
- Nano particles;
- Reynolds number amp;
- turbulent flow;
58.DESIGN OF LOW POWER AND AREA EFFICIENT FULL ADDER FOR ALU USING 90NM PROCESS FOR INDUSTRIAL BASED CAD/CAM MANUFACTURING UNITS

机译：基于工业工业CAD / CAM制造单元使用90nm工艺的低功率和面积高效全加法器设计
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- CMOS;
- GDI;
- Hybrid full adder;
- CPL;
59.DAMAGE ASSESSMENT IN STRUCTURES USING VIBRATION DATA AND SMART MATERIALS

机译：使用振动数据和智能材料的结构损坏评估
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Damage detection;
- Condition monitoring;
- Piezoelectric sensors;
- Frequency response function amp;
- damage index;
60.REVIEW OF CURRENT TECHNOLOGY IN GLASS FIBRE COMPOSITE

机译：玻璃纤维复合材料电流技术综述
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Glass fibre;
- Polyester resin;
- Epoxy resin;
- Mechanical properties amp;
- electrical properties;
61.PERFORMANCE TEST ON 4-STROKE PETROL ENGINE WITH PURE OXYGEN

机译：用纯氧的4行程汽油发动机进行性能测试
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Pure oxygen;
- Internal combustion engine;
- Vacuum chamber;
- Power amp;
- torque;
62.ADDRESSING NO_X - SMOKE TRADE OFF IN A DIRECTION INJECTION DIESEL ENGINE WITH FUEL BLENDS OF DIETHYL ETHER AND DIESEL

机译：解决NO_X - 在带燃料混合物的方向注射柴油发动机中的烟雾折衷，燃料混合物和柴油
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Combustion;
- DEE;
- Diesel blends;
- Nitrogen oxides;
- Nox-Smoke amp;
- trade-Off;
63.COGGING TORQUE REDUCTION OF SPINDLE MOTOR FOR IT APPLICATION

机译：用于IT应用的主轴电机的齿轮扭矩减小
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- BLDC motor;
- Cogging torque;
- Finite element method;
- Magnetizing fixture amp;
- permanent magnet;
- Spindle motor;
64.VIBRATING MEMBRANE PROBLEM SOLVED USING SPLINE COLLOCATION METHOD WITH DIRICHLET CONDITIONS

机译：使用具有Dirichlet条件的花键搭配方法解决的振动膜问题
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
65.DESIGN AND FABRICATION OF LOW COST PAPER RECYCLING EQUIPMENT

机译：低成本纸质回收设备的设计与制造
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Recycling;
- Paper;
- Design;
- Fabrication amp;
- recycling equipment;
66.EFFECTS OF THERMAL RADIATION AND VISCOUS DISSIPATION ON POWELLEYRING NANOFLUID WITH VARIABLE THICKNESS

机译：热辐射和粘性耗散对具有可变厚度磷细胞型纳米流体的影响
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Thermal radiation;
- Powell - eyring fluid;
- Heat viscous dissipation amp;
- MHD;
67.EMISSION TESTING OF CATALYTIC CONVERTER USING ZIRCONIUM OXIDE (ZrO) AND COBALT OXIDE (CoO) AS CATALYST

机译：使用氧化锆（Zro）和氧化钴（COO）作为催化剂的催化转化器的排放测试
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Exhaust emission;
- Catalytic converter;
- Oxidation and reduction process;
- Gas analyzer amp;
- wire mesh;
68.OBJECT ORIENTED METRIC BASED ANALYSIS OF SPACE EFFICIENT LSB BASED STEGANOGRAPHY INCLUDING COMPRESSION FOR SECURING TRANSMISSION OF E-LEARNING DOCUMENTS

机译：基于对象的基于度量的空间高效基于LSB的隐性分析，包括用于确保电子学习文档传输的压缩
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- LSB based steganography;
- E-learning;
- Class hierarchy diagram amp;
- object oriented metrics;
69.FABRICATION OF FUNCTIONALLY GRADED COMPOSITE MATERIAL USING POWDER METALLURGY ROUTE: AN OVERVIEW

机译：用粉末冶金路线制造功能梯度复合材料：概述
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Functionally graded composite material (FGCM);
- Fabrication;
- Powder metallurgy (PM) amp;
- sintering;
70.NUMERICAL INVESTIGATIONS FOR THE EFFECT OF COLD AND HOT AIR ON VARIOUS PARAMETERS OF FLOW THROUGH A SUPER SONIC NOZZLE AT HIGHER ALTITUDES

机译：高海拔超声喷嘴冷热空气对冷热空气效应的数值研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Numerical simulations;
- Nozzle flow amp;
- parametric analysis;
71.DESIGN AND DEVELOPMENT OF PNEUMATIC COTTON BOLL PICKING MACHINE

机译：气动纯棉棉铃采摘机的设计与开发
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Cotton boll picking machine;
- CFD analysis;
- Impeller amp;
- tetrahedron elements;
72.ENERGY MANAGEMENT STUDY OF BOILER IN AN ALCOHOL REFINING FACTORY IN ETHIOPIA

机译：埃塞俄比亚酒精炼油厂锅炉能源管理研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Energy;
- Energy audit;
- Steam generation;
- Power plant amp;
- economics;
73.A PARAMETRIC ANALYSIS OF DEFORMATION OF WORKPIECE, IN CLOSED DIE FORGING

机译：工件变形的参数分析，闭合模锻
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Simulation;
- Forging;
- Material flow rate amp;
- flash;
74.DESIGN AND IMPLEMENTATION OF ZETA MICRO-INVERTER FOR SOLAR PV APPLICATION

机译：太阳能光伏应用Zeta微逆变器的设计与实现
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- ZETA-Microinverter;
- Photovoltaic (PV);
- AC module;
- Continuous conduction mode (CCM);
- MPPT(Pamp;
- O);
75.THE BEST IMPACT OF SMALL MEDIUM ENTERPRISES IN SCALE INDUSTRIES - AN OVER VIEW

机译：中小型企业在规模产业中的最佳影响 - 过度视野
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
76.DEVELOPMENT AND STUDY OF TRIBOLOGICAL PROPERTIES OF BIOCOMPOSITE FOR BRAKE PAD APPLICATION

机译：制动垫应用生物复合摩擦性能的发展与研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Eco friendly composite;
- Tribology amp;
- break pad;
77.NOZZLE CONTOUR DESIGN FOR SPACE PROPULSION MODULE

机译：空间推进模块的喷嘴轮廓设计
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Spacecraft;
- Propulsion module;
- Nozzle counter amp;
- asteroid 2010TK7;
78.CORRELATION DEVELOPMENT FOR EROSIVE WEAR RATE ON PELTON TURBINE BUCKETS

机译：佩尔顿汽轮机腐蚀寿命的相关开发
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Hydro turbine;
- Renewable energy;
- Silt size;
- Erosion amp;
- stream velocity;
79.MATHEMATICAL MODEL DEVELOPMENT FOR VISCOSITY OF TRANSESTERIFIED JATROPHA OIL USING BOX - BEHNKEN METHOD

机译：用盒子的酯化的麻醉药油粘度的数学模型开发 - Behnken方法
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Mathematical model;
- Jatropha oil;
- Box-Behnken amp;
- ANOVA;
80.COMPRESSIVE AND FLEXURAL STRENGTH IMPROVEMENT OF JUTE FIBRE REINFORCED POLYMER COMPOSITE

机译：黄麻纤维增强聚合物复合材料的压缩和抗压强度改进
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Synthetic fibre;
- Stem and ribbon;
- Jute fiber amp;
- epoxy resin;
81.TAPPING OF LOST VELOCITY OF AIR FOR WIND MILL WITH SECOND ROTOR SET-UP

机译：利用第二转子设置点击风车损失空气速度
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Velocity of air;
- Second rotor setup;
82.EFFECT OF SINTERING TEMPERATURE ON MECHANICAL PROPERTIES OF Mg-Zr ALLOY

机译：烧结温度对Mg-ZR合金机械性能的影响
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Mg alloy;
- Powder metallurgy amp;
- tensile strength;
83.EXPERIMENTAL RESULTS OF COCONUT SHELL POLYMER MATRIX COMPOSITES

机译：椰壳聚合物基复合材料的实验结果
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Polymer matrix;
- Bio fillers;
- Coconut shell powder amp;
- matrix properties;
84.A FREQUENCY BASED FREE VIBRATION ANALYSIS OF A HAT STIFFENED PLATE, FOR IDENTIFICATION OF THE DAMAGE

机译：帽子加强板的基于频率的自由振动分析，用于识别损伤
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Hat-Stiffened plate;
- Natural frequencies;
- Conjugates beam method;
- Modal analysis amp;
- damage detection;
85.MECHANICAL PROPERTIES OF SNAKE GRASS WITH SISAL FIBER REINFORCED PLA COMPOSITES

机译：Sisal纤维增强PLA复合材料的蛇草力学性能
- 作者：C. THIRUVASAGAM;S. PRABAGARAN;P. SURESH
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2018年第2期
- Mechanical Characterization;
- Behavior;
- Reinforced;
- SF;
- SG amp;
- PLA Composites;
86.NEW GREEN ENERGY: OCEAN WAVE ENERGY CONVERSION PHYSICAL TURBINE MODELS AND DESIGNS PHOTOS PRESENTATION AND EXPLANATIONS FOR LARGE SCALE MANUFACTURING

机译：新的绿色能源：海浪能量转换物理涡轮机模型，设计照片展示和大规模制造的解释
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
87.APPLICATION OF LINK ADJACENCY VALUES ON SIX LINK PLANAR MECHANISMS FOR IDENTIFICATION OF ISOMORPHISM

机译：链路邻接值在六个链接平面机制中的应用
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Kinematic chains (KC);
- First adjacency link value (FALV) and second adjacency link value (SALV);
88.STRUCTURAL AND DROPTEST ANALYSIS OF HELICOPTER LANDING SKIDS

机译：直升机着陆橇的结构和最小分析
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第5期
- Landing skids;
- Structural analysis;
- Drop test amp;
- simulation of drop test;
89.SLURRY EROSIVE WEAR BEHAVIOR OF AA 6063/TIC PARTICLES IN SITU COMPOSITES

机译：AA 6063 / TIC粒子的浆料腐蚀行为原位复合材料
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Metal matrix;
- Wear and slurry erosion;
90.A REVIEW ON ACOUSTICAL PROPERTIES MEASUREMENT METHODS AND A PROPOSED NOVEL METHOD FOR ACOUSTICAL CHARACTERIZATION OF LAMINATED GLASS USED IN AUTOMOTIVE APPLICATIONS

机译：隔音特性测量方法的综述及汽车应用中使用的夹层玻璃声学特征的提出新方法
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- The finite element;
- Polyvinyl butyric amp;
- laminated glass (LG);
91.GRAIN REFINEMENT THROUGH DESIGN MODIFICATION OF ECAP DIES

机译：通过设计改造的晶粒细化Enap Dies
- 作者：PANKAJ KUMAR;J. HARIVIGNESH
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2018年第1期
- Severe Plastic Deformation (SPD);
- ECAP;
- Ultrafine refinement (UFG);
- Microstructure amp;
- Strain rate;
92.FABRICATION AND PERFORMANCE OF SOLAR PARABOLIC TROUGH CONCENTRATOR WITH AND WITHOUT COATING ON RECEIVER TUBE

机译：太阳能抛物线槽浓缩器的制造和性能，无涂层在接收管上的涂层
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Solar parabolic trough collector (PTC);
- Reflector;
- Receiver;
- Maximum thermal efficiency;
- Maximum temperature;
- Fabrication amp;
- coating;
93.WASTE PYROLYSIS TIRE OIL AS ALTERNATIVE FUEL FOR DIESEL ENGINES

机译：废物热解轮油作为柴油发动机的替代燃料
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Alternative fuels;
- Blend;
- Tire pyrolysis oil;
- Engine performance amp;
- VCR diesel engine;
94.EVALUATION OF MACHINABILITY OF D2 STEEL USING CRYO TREATED CERMET USING TAGUCHI TECHNIQUE

机译：使用Taguchi技术使用Cryo处理Cermet的D2钢的可加工性评价
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第3期
- Smooth surface;
- Device edge;
- Nourish amp;
- cutting pace;
95.CASE STUDY ON ILLEGAL SAND MINING IN TAMIL NADU: ALTERNATE SOLUTION BY REPLACING NATURAL SAND BY M-SAND

机译：泰米尔纳德非法沙坑案例研究：用M-Sand取代天然沙滩的交替解决方案
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- Sand mining;
- Natural sand;
- M-Sand amp;
- construction;
96.AN ASSESSMENT OF THE SOIL FERTILIZATION STATUS OF IB-INW ZONE OF RAJASTHAN

机译：Rajasthan IB-Inw区土壤施肥地位评估
- 作者：JYOTI SIHAG;DIVYA PRAKASH
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2019年第1期
- Micro-Nutrient;
- IB-INW zone;
- TFS;
- TPS;
- COS;
- DI value;
- Entisols amp;
- aridisols;
97.OPTIMIZATION OF PID CONTROLLER GAINS OF AN AIRCRAFT PITCH CONTROL SYSTEM USING PARTICLE SWARM OPTIMIZATION ALGORITHM

机译：采用粒子群优化算法优化飞机俯仰控制系统的PID控制器增益
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- PID controller;
- PSO algorithm;
- Aircraft pitch control system amp;
- mat lab auto tuning;
98.EXPERIMENTAL INVESTIGATION OF HIGH SPEED DRILLING OF GLASS FIBER REINFORCED PLASTIC (GFRP) COMPOSITE LAMINATES MADE UP OF DIFFERENT POLYMER MATRICES

机译：不同聚合物基质组成的玻璃纤维增强塑料（GFRP）复合层压板的高速钻孔实验研究
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第6期
- GFRP;
- De lamination factor;
- Thrust force;
- Spindle speed amp;
- torque;
99.DESIGN AND ANALYSIS OF MINI-UAV

机译：迷你无人机的设计与分析
- 作者：K. SREELAKSHMI;B. NIHARIKA
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2018年第1期
100.EVALUATION OF HIGH SPEED DIESEL ENGINE PERFORMANCE AND CHARECTERISTICS OF ITS EMISSIONS WITH CARBON NANOTUBES ADDED ETHANOL-DIESEL BLENDS

机译：高速柴油发动机性能评价及其碳纳米管排放的特性，加入乙醇 - 柴油混合物
- 期刊名称：《International journal of mechanical and production engineering research and development》 | 2017年第4期
- Diesel engine;
- Ethanol;
- Performance;
- Emissions amp;
- blends amp;
- CNT;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号