首页>外文期刊>International Journal of Mechanics and Solids

International Journal of Mechanics and Solids

中文名称：国际期刊的力学和固体

ISSN：0973-1881
出版周期：3 times a year

发文量：116

期刊论文

热门论文

年度选择

2022
- 第1期
- 第2期
2021
- 第1期
- 第2期
2020
- 第1期
- 第2期
2019
- 第1期
- 第2期
2018
- 第1期
- 第2期
2017
- 第1期
- 第2期
2016
- 第1期
- 第2期
2015
- 第1期
- 第2期
2014
- 第1期
- 第2期
2013
- 第1期
- 第2期
2012
- 第1期
- 第2期
2011
- 第1期
- 第2期
2010
- 第1期
- 第2期
2009
- 第3期

更多>>

全选（0）

1.Analysis of Adhesive Bonded Single Lap Joints in Hybrid Composites Subjected to Transverse Load With S-S End Conditions

机译：S-S末端条件下承受横向载荷的混杂复合材料中单键搭接接头的分析
- 作者：G. N. Rao;M. V. Rao;K. M. Rao;V. R. Raju;V. B. K. Murthy;V. V. S. Raju
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- SLJ;
- FEM;
- FRP;
- Inter-laminar stresses;
2.Review on Soderberg Cell Technology Performance and Its Possibilities

机译：Soderberg电池技术性能及其可能性综述
- 作者：C. Karuppannan;R. Prabhakar
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- Soderberg;
3.Mechano Neural Transduction in the Semicircularcanal Distribution of Ciliar Deflections

机译：C骨变形半圆管分布的机械神经传导
- 作者：Ebenezer Njeugna;Emmanuel Ngale Haulin;Charles Kopp;Jean-Louis Eichhorn
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- Semicircular Canal;
- Sensory Cell;
- Mechanoneural Transduction;
- Mechanical Model;
4.Development of Analytical Stress-Strain Model for Glass Fiber Reinforced Self Compacting Concrete

机译：玻璃纤维自密实混凝土分析应力-应变模型的建立
- 作者：M. L. V. Prasad;P. Rathish Kumar;Toshiyuki Oshima
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
5.Convective Heat Transfer Analysis of a Aero Gas Turbine Blade Using Ansys

机译：基于Ansys的燃气轮机叶片对流换热分析。
- 作者：S. Gowreesh;N. Sreenivasalu Reddy;N. V. Yogananda Murthy
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
6.Influence of Gravity on the Propagation of SH Waves in a Magnetoelastic Self-reinforced Media

机译：重力对SH波在磁弹性自增强介质中传播的影响
- 作者：A. Chattopadhyay;S. Gupta;Abhishek. Kr. Singh
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- SH waves;
- Magnetoelastic;
- Initial stress;
- Gravity;
- Self-reinforcement;
7.Simulation and Kinematic Analysis of Tri-Glide Parallel Manipulator

机译：三滑行并联机器人的仿真与运动学分析
- 作者：A. Arockia Selvakumar;K. A. Anant;T. Lakshmi Narayanan;Dhandapani;R. Sivaramakrishnan
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- Parallel manipulator;
- 3 DOF;
- Dimensional synthesis;
8.Effect of Actuation Schemes on Performance of Industrial Manipulators

机译：激励方案对工业机械手性能的影响
- 作者：K. Ramji;V. Ramachandra Raju;S. Ramana Babu
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- Actuator;
- Global condition index (GCI);
- Velocity ellipsoid;
9.Three-Dimensional Finite Element Analysis of Adhesively Bonded Single Lap Joints in Laminated FRP Composites Subjected to Thermal Loading With C-C End Conditions

机译：C-C端条件下热载荷作用下的FRP层压复合材料中单键搭接接头的三维有限元分析
- 作者：M. Venkateswara Rao;K. Mohana Rao;V. Rama Chandra Raju;V. Bala Krishna Murthy;V. V. Sridhara Raju
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- SLJ;
- FEM;
- FRP;
- Interlaminar stresses;
10.Wave Propagation in Circumferential Direction in Micropolar Cylindrical Curved Plate

机译：微极圆柱弯曲板在周向上的波传播
- 作者：Rajneesh Kumar;Geeta Partap
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- Micropolar;
- Frequency equations;
- Phase velocity;
- Circumferential wave number;
11.The Study of Solution Growth of Potassium Bromide Crystal Under Varying Growth Conditions and its Thermoluminescent Properties

机译：不同生长条件下溴化钾晶体溶液生长及其热致发光性能的研究
- 作者：Meena Laad
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- Crystal growth;
- Solution growth technique;
- Thermoluminescence;
- Glow curves;
12.Smart Control Strategies for Non Linear Structures

机译：非线性结构的智能控制策略
- 作者：Ottavia Corbi
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
- Non Linear Dynamics;
- Structural Active and Semi-Active Control;
13.Creep Transition Stresses in Thick Walled Rotating Cylinder by Finitesimal Deformation under Steady State Temperature

机译：稳态温度下壁厚圆柱体蠕变过渡应力的有限变形
- 作者：Pankaj;Gaurav Sharma
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
14.Workability and Strength characteristics of Cement Concrete with Partial Replacement of River Sand by Manufactured Fine aggregate

机译：人造细骨料部分代替河砂的水泥混凝土的可加工性和强度特性
- 作者：V. R. K. Narasinha Raju;T. Appa Reddy
- 期刊名称：《International Journal of Mechanics and Solids》 | 2009年第3期
15.Study on Strength and Durability Characteristics of Glass Fibre Concrete

机译：玻璃纤维混凝土的强度和耐久性特性研究
- 作者：K. Chandramouli;P. Srinivasa Rao;N. Pannirselvam;T. Seshadri Sekhar;P. Sravana
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第1期
- Concrete;
- Glass fibres;
- Rapid chloride permeability test;
- Strength properties;
16.Projectile Penetration Analysis in Armour Using Finite Element Method

机译：装甲弹丸侵彻的有限元分析
- 作者：P. Velmurugan;P. Balasubramanian;G. Thanigaiyarasu
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第2期
- Ceramic-composite armour;
- Projectile;
- Ballistic limit velocity;
- Oblique impact;
- Normal impact;
- Finite element method;
17.Finite Element Analysis of Extended Endplate Beam to Column Bolted Steel Connection

机译：扩展端板梁与柱螺栓连接的有限元分析
- 作者：D. K. Mishra;S. K. Srivastava
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第2期
18.Free Vibration Analysis of a Bernoulli-Euler Beam Carrying a two degree-Of-freedom Spring Mass System

机译：带有两自由度弹簧质量系统的伯努利-欧拉梁的自由振动分析
- 作者：M. Bala Chennaiah;N. Mohan Rao;V. Sudheer Kumar;D. Hema;A. Sreenivasulu
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第2期
19.Nonlinear Creep Behavior of Raphia Vinifera L. Arecacea under Flexural Load

机译：弯曲载荷作用下长叶楠的非线性蠕变行为
- 作者：P. K. Talla;E. Foadieng;M. Fogue;J. S. Mabekou;F. B. Pelap;A. F. Sinju;A. Foudjet
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第2期
20.Experimental Investigation of Cutting Tool Vibrations by Replacing Various Thermoplastic Gears and its Comparison with Metal Gears in the Feed Box of Lathe Machine

机译：车床进给箱内更换各种热塑性齿轮切削刀具振动的实验研究及其与金属齿轮的比较
- 作者：V. G. Arajpure;P. M. Padole;Kshitij Gupta
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第2期
- Vibration;
- Tool Post;
- Thermoplastic Gears;
21.Dynamic Buckling of Perfect Plastic Columns

机译：完美塑料柱的动态屈曲
- 作者：A. Abdel Gawad;I. Rashwan;M. Nassar
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第1期
- Dynamic buckling;
- Imperfections;
- Strain rate materials;
- Perfect plastic;
- Amplification function;
22.Experimental Estimation of Mixed Mode I/II Fracture Toughness of SE(B) Specimen of Aluminum Alloys

机译：铝合金SE（B）试样混合模I / II断裂韧性的实验估算
- 作者：R. Ravichandaran;G. Thanigaiyarasu
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第1期
- Fracture Toughness;
- Three-point bend specimen;
- J-R curve;
- Mixed-mode;
23.Time-temperature equivalency of Raphia Vinifera L. (Arecaceae) under Compression

机译：压缩下的非洲楠（Raphaa Vinifera L.）（Arceaceae）的时间温度等效
- 作者：P. K. Talla;A. Fomethe;M. Fogue;A. Foudjet;G. N. Bawe
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第1期
- Creep;
- TTSP;
- WLF equation;
- Activation energy;
24.Experimental Investigation on The Behavior of R.C.C. Beam-Column Joints Retrofitted with GFRP-CFRP Hybrid Wrapping Subjected to Load Reversal

机译：R.C.C.行为的实验研究GFRP-CFRP混合包裹加固的梁柱节点可承受荷载反转
- 作者：S. Robert Ravi;G. Prince Arulraj
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第1期
- Beam-column joint;
- Retrofitting;
- GFRP sheet;
- CFRP sheet;
25.Influence of Constant Stresses on Rayleigh Waves under Gravity Effect

机译：重力作用下恒应力对瑞利波的影响
- 作者：S. Raj Reddy
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第1期
- Constant Stresses;
- Rayleigh wave;
- Gravity effect;
26.Propagation of Love Waves in Nonlocal Elastic Medium with Material Boundary

机译：具有局部边界的非局部弹性介质中爱波的传播
- 作者：S. Raj Reddy;B. Ramabrahmam
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第1期
- Nonlocal Moduli;
- Residual Surface tension;
- Material boundary;
- Love waves;
27.Fatigue Analysis of Connecting Rod using ANSYS Code

机译：使用ANSYS代码对连杆进行疲劳分析
- 作者：Shyam Bihari Lal;Abhishek Tevatia;S. K. Srivastava
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第2期
- Connecting rod;
- Cyclic fatigue loading;
- Fatigue longevity;
- FEM;
28.Finite Element Analysis of Laminated Composite Beams for Zigzag Theory using MATLAB

机译：基于MATLAB的Zigzag理论的层合复合梁的有限元分析
- 作者：M. Naushad Alam;Nirbhay Kr. Upadhyay
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第1期
- Composite laminates;
- FEM;
- MATLAB;
- Static analysis;
- ABAQUS;
29.Effect of Chromium on Hardness and Tensile Properties of Fe-0.35 wt% P Based P/M Alloys

机译：铬对Fe-0.35 wt％P基P / M合金硬度和拉伸性能的影响
- 作者：Deepika Sharma;Kamlesh Chandra;Prabhu Shankar Misra
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第2期
- Preform forging;
- Density;
- Coating;
30.Propagation of Waves at an Interface Between a Thermally Conducting Liquid Half-Space and a Thermoelastic Half-Space with Diffusion

机译：波在导热液体半空间与热弹性半空间之间的扩散界面处的传播
- 作者：Baljeet Singh;Lakhbir Singh;Sunita Deswal
- 期刊名称：《International Journal of Mechanics and Solids》 | 2010年第2期
- Thermoelastic;
- Diffusion;
- Reflection and Refraction;
- Amplitude Ratios;
31.Effect of Position and Tilt Angle of the Flap on Vibration Control of Plate - A Finite Element Analysis

机译：襟翼的位置和倾角对板振动控制的影响-有限元分析。
- 作者：P. Mahadevaswamy;B. S. Suresh
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第1期
- Vibration control;
- Rectangular plate;
- Auxiliary Flap;
- Tilt angle;
- FEA;
32.Creep Analysis of Notched Structural Stainless Steel by Finite Element Method

机译：缺口结构不锈钢的蠕变有限元分析
- 作者：S. Baskar;P. Velmurugan
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第1期
- Creep;
- Finite element analysis;
- Notch;
- Austenitic stainless steel;
33.Variation in Surface Contact Stress due to Change in Theoretical Geometry to Actual Geometry

机译：由于理论几何向实际几何变化而导致的表面接触应力变化
- 作者：Abhitab Dubey
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
- Surface Stress;
- Modulus of Elasticity;
- Center distance;
- Pitch circle diameter;
34.Finite Design for Hydrodynamic Pressures on Immersed Moving Surfaces

机译：沉浸式运动表面上的水动力压力的有限设计
- 作者：C. C. Ihueze;S. M. Ofochebe
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
- Reservoir;
- Functional;
- Minimum integral;
- Vibrating column;
- Submerged surface;
35.Interaction Effect of Auxiliary Holes for Mitigation of Stress Concentration in Isotropic Plate with Central Circular Hole Subjected to In-Plane Loading

机译：平面内载荷作用下各中央圆孔各向同性板的辅助孔对应力集中的缓和作用
- 作者：Shubhrata Nagpal;S. Sanyal;N. K. Jain
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
- Finite Element Analysis;
- Stress Concentration Factor;
- Plate;
- Mitigation of stress concentration factor;
36.Development of Natural Fiber [palm-archontophoenix-beatrice Fiber] Composites using Injection Moulding Method

机译：注射成型法开发天然纤维[手掌-对甲-凤凰-beat碳纤维]复合材料
- 作者：Abhitab Dubey;N. D. Mittal;Geeta Agnihotri
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
37.On Accurate Stress Determination in Laminated Finite Length Cylinders Subjected to Thermo Elastic Load

机译：受热弹性载荷作用的有限长叠层圆柱的精确应力确定
- 作者：Payal Desai;Tarun Kant
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第1期
- A. Laminate;
- B. Thermal properties;
- C. Computational mechanics;
- C. Deformation;
- C. Structural composites;
38.Direct Moment Distribution Method for Frames with Lateral Sway

机译：横向摆框架的直接力矩分配方法
- 作者：Yu Zhang;Bin Tao;Feng Xi
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
39.Finite Element Fatigue Analysis of Connecting Rods of Different Cross-Sections

机译：不同截面连杆的有限元疲劳分析
- 作者：Abhishek Tevatia;Shyam Bihari Lal;S. K. Srivastava
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第1期
- Connecting rod;
- Cyclic fatigue loading;
- Fatigue longevity;
- FEM;
40.Modelling and Analysis for Solidification of Casting Process

机译：铸造过程凝固的建模与分析
- 作者：Jawed Rafiq;D. K. Singh
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
- Numerical simulation;
- Finite elements;
- Solidification of pure copper;
- Sand and ceramsite;
- Design of experiment;
41.Finite Element Axisymmetric Mathematical Model for the Water Tube Boiler; Steady State Heat Transfer

机译：水管锅炉的有限元轴对称数学模型;稳态传热
- 作者：Martin Obinna Nwankwo;Christian Sunday Chukwuekezie
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第1期
- Finite Element;
- Mathematical Modeling;
- Steady State Heat Transfer;
- Axisymmetric Tube;
42.Response Reduction for Seismic Excitation in High Rise Structures using Dynamic Damping

机译：利用动态阻尼降低高层结构中的地震响应
- 作者：M. V. N. Sivakumar
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
- Response reduction;
- Dynamic damping;
- Seismic effects;
- High rise buildings;
43.Micromechanical Analysis of FRP Composites Subjected to Thermal Loading

机译：FRP复合材料在热载荷作用下的微力学分析
- 作者：N. Krishna Vihari;P. Phani Prasanthi;V. Bala Krishna Murthy
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
- FRP lamina;
- Fiber matrix interface;
44.Brain Computer Interaction of Indian Facial Expression Recognition through Digital Electroencephalography

机译：通过数字脑电图识别印度面部表情的大脑计算机交互作用。
- 作者：Dinesh Chandra Jain;V. P. Pawar
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第1期
- BCI;
- EEG;
- Expression;
- Facial coding System;
45.Integrity Assessment of the Yield Locus under a Plastic Flow for the Failure of Notched Bars Subjected to a Complex Behavior

机译：塑性流下带槽钢筋在复杂行为下的破坏下屈服点的完整性评估
- 作者：Jad Jelwan;Garth Pearce;Mahiuddin Chowdhry
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
46.Disturbance of SH-type Waves due to Shearing-Stress Discontinuity in a Visco-elastic Layered Half-Space

机译：粘弹性层状半空间中的剪应力不连续性引起的SH型波扰动
- 作者：P. C. Pal;B. Sen
- 期刊名称：《International Journal of Mechanics and Solids》 | 2011年第2期
- Kelvin-Voigt solids;
- Laplace and Fourier transform;
- Shearing stress discontinuity;
- Frequency parameter;
47.Development of Analytical Stress-Strain Model for Glass Fiber Reinforced Self Compacting Concrete

机译：玻璃纤维自密实混凝土分析应力-应变模型的建立
- 作者：M. L. V. Prasad;P. Rathish Kumar;Toshiyuki Oshima
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第1期
48.Smart Control Strategies for Non Linear Structures

机译：非线性结构的智能控制策略
- 作者：Ottavia Corbi
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第1期
- Non Linear Dynamics;
- Structural Active and Semi-Active Control;
49.Fatigue Analysis of Connecting Rod using ANSYS Code

机译：使用ANSYS代码对连杆进行疲劳分析
- 作者：Shyam Bihari Lai;Abhishek Tevatia;S. K. Srivastava
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第2期
- Connecting rod;
- Cyclic fatigue loading;
- Fatigue longevity;
- FEM;
50.Review on Soderberg Cell Technology Performance and Its Possibilities

机译：Soderberg电池技术性能及其可能性综述
- 作者：C. Karuppannan;R. Prabhakar
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第1期
- Soderberg;
51.Nonlinear Creep Behavior of Raphia Vinifera L. Arecacea under Flexural Load

机译：弯曲载荷作用下长叶楠的非线性蠕变行为
- 作者：P. K. Talla;E. Foadieng;M. Fogue;J. S. Mabekou;F. B. Pelap;A. F. Sinju;A. Foudjet
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第2期
52.Analysis of Adhesive Bonded Single Lap Joints in Hybrid Composites Subjected to Transverse Load With S-S End Conditions

机译：S-S末端条件下承受横向载荷的混杂复合材料中单键搭接接头的分析
- 作者：G. N. Rao;M. V. Rao;K. M. Rao;V. R. Raju;V. B. K. Murthy;V. V. S. Raju
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第1期
- SLJ;
- FEM;
- FRP;
- Inter-laminar stresses;
53.Free Vibration Analysis of a Bernoulli-Euler Beam Carrying a two degree-Of-freedom Spring Mass System

机译：带有两自由度弹簧质量系统的伯努利-欧拉梁的自由振动分析
- 作者：M. Bala Chennaiah;N. Mohan Rao;V. Sudheer Kumar;D. Hema;A. Sreenivasulu
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第2期
54.Experimental Investigation of Cutting Tool Vibrations by Replacing Various Thermoplastic Gears and its Comparison with Metal Gears in the Feed Box of Lathe Machine

机译：车床进给箱内更换各种热塑性齿轮切削刀具振动的实验研究及其与金属齿轮的比较
- 作者：V. G. Arajpure;P. M. Padole;Kshitij Gupta
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第2期
- Vibration;
- Tool Post;
- Thermoplastic Gears;
55.Finite Element Analysis of Extended Endplate Beam to Column Bolted Steel Connection

机译：扩展端板梁与柱螺栓连接的有限元分析
- 作者：D. K. Mishra;S. K. Srivastava
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第2期
56.Effect of Actuation Schemes on Performance of Industrial Manipulators

机译：激励方案对工业机械手性能的影响
- 作者：K. Ramji;V. Ramachandra Raju;S. Ramana Babu
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第1期
- Actuator;
- Global condition index (GCI);
- Velocity ellipsoid;
57.The Stress Intensity Factor for Two Griffith-Cracksopened by Two Similar Exterior Wedges in Stress-Free Isotropic Rectangle

机译：无应力各向同性矩形中两个相似的外部楔形物打开的两个格里菲斯裂缝的应力强度因子
- 作者：Dharam Veer Singh;P. S. Kushwaha
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第1期
- Stress-intensity factors;
- Crack opening' displacement;
- Fourier Transform;
58.Creep Transition Stresses in Thick Walled Rotating Cylinder by Finitesimal Deformation under Steady State Temperature

机译：稳态温度下壁厚圆柱体蠕变过渡应力的有限变形
- 作者：Pankaj;Gaurav Sharma
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第1期
59.Convective Heat Transfer Analysis of a Aero Gas Turbine Blade Using Ansys

机译：基于Ansys的燃气轮机叶片对流换热分析。
- 作者：S. Gowreesh;N. Sreenivasalu Reddy;N. V. Yogananda Murthy
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第1期
60.Projectile Penetration Analysis in Armour Using Finite Element Method

机译：装甲弹丸侵彻的有限元分析
- 作者：P. Velmurugan;P. Balasubramanian;G. Thanigaiyarasu
- 期刊名称：《International Journal of Mechanics and Solids》 | 2012年第2期
- Ceramic-composite armour;
- Projectile;
- Ballistic limit velocity;
- Oblique impact;
- Normal impact;
- Finite element method;
61.Influence of Hybridization of Carbon Fiber on Mechanical Properties of Jute Fiber Reinforced Polypropylene Composites

机译：碳纤维混杂对黄麻纤维增强聚丙烯复合材料力学性能的影响
- 作者：Ravishankar R.;K. Chandrashekara;Rudramurthy
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第2期
- Jute fiber;
- Carbon fiber;
- Polypropylene;
- Tensile;
- Flexural;
- Impact;
- Hardness;
62.Synthesis, Growth and characterization of Semi Organic Non-linear Optical Single Crystals: Urea - Potassium Nitrate Crystal by Slow Evaporation Technique

机译：半有机非线性光学单晶的合成，生长和表征：慢蒸发技术尿素-硝酸钾晶体
- 作者：M. Radha Ramanan;R. Radhakrishnan;S. Krishnan;V. Chithambaram
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第1期
63.Effect of Cooling Rate on Degree of Crystallinity and Mechanical Properties of Sisal Fiber Reinforced Green Composites

机译：冷却速率对剑麻纤维增强绿色复合材料结晶度和力学性能的影响
- 作者：Thota Venkateswara Rao;K. N. S. Suman;G. B. Kiran
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第2期
- Green composites;
- Cooling rate;
- Mechanical properties;
- Degree of crystallinity;
- Electron microscopy;
64.Effect of Short Coir Fiber Reinforcement on Tensile Response of Polymer Matrix

机译：短椰壳纤维增强对聚合物基体拉伸响应的影响
- 作者：P. A. Udaykumar;Rajanna S.;Ramalingaiah
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第1期
65.Microstructure and Wear Resistance Relations of Stellite Alloys

机译：司太立合金的显微组织和耐磨性关系
- 作者：S. Kapoor;R. Liu;X. J. Wu;M. X. Yao
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第1期
- Stellite alloy;
- Carbide;
- Solid solution;
- Wear resistance;
- High temperature;
- Oxidation;
66.An Order Level Inventory Model for Weibull Deteriorating Items with Partial Backordering, Time Varying Holding Cost Under Permissable Delay in Payments

机译：带有部分延期交货的Weibull变质物品的订单级库存模型，在允许的付款延迟下具有可变的持有成本
- 作者：Shital S. Patel;Raman Patel
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第1期
- Inventory;
- Deterioration;
- Time varying holding cost;
- Partial backlogging;
- Shortages;
- Permissible delay in payment;
67.X-Ray Powder Diffraction and Crystallographic Data of Escitalopram Oxalate

机译：草酸依西酞普兰的X射线粉末衍射和晶体学数据
- 作者：Linga Reddy B.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第1期
- Powder diffraction;
- Escitalopram oxalate;
68.Studies on Mechanical and Slurry Erosion Properties of Glass fiber-polyester Composites

机译：玻璃纤维-聚酯复合材料的机械和浆料冲蚀性能研究
- 作者：Z. Edward Kennedy;Anirudha Chatterjee;S. Natarajan
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第1期
- Glass fibre reinforced Polymer (GFRP);
- Polyester Resin;
- Hand lay-up;
- Erosion Tester;
- Corrosion;
- Scanning Electron Microscopy (SEM);
69.Development and Property Evaluation of Aluminum alloy based Nano Metal Matrix Composites (NMMCs) for Automotive Applications

机译：汽车用铝合金基纳米金属基复合材料（NMMC）的开发和性能评估
- 作者：G. Balakumar
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第2期
- Nanocomposites;
- Mechanical fracture toughness;
- Microstructure;
70.Analysis of Abrasive Wear Behavior of Carbon Fabric Reinforced Epoxy Composite using Taguchi Method

机译：Taguchi法分析碳纤维增强环氧树脂复合材料的磨料磨损行为
- 作者：Sudarshan Rao K;Y. S. Varadarajan;N. Rajendra
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第1期
- Composite;
- Fabric;
- Abrasive wear;
- Silica;
- Epoxy;
- Orthogonal array;
71.Analysis of variation in electrochemical bath parameters on the properties of Ni-SiC nanocomposite coatings using Taguchi technique

机译：Taguchi技术分析Ni-SiC纳米复合涂层电化学浴参数的变化
- 作者：K. V. Sharma;A. V. Seethagirisha
- 期刊名称：《International Journal of Mechanics and Solids》 | 2013年第2期
- Electro-co-deposition;
- SiC nanoparticles;
- Microstructure;
- Taguchi Technique;
72.An Analysis and Study on Software Health Management of Aircraft and Other Automobiles

机译：飞机及其他汽车软件健康管理分析研究
- 作者：Kawshik K. R.;Shriram K. Vasudevan;Prakash P.;Keerthana Gunasekaran
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第1期
- Safety;
- Software health management;
- IVHM;
- Aircraft;
- SHM;
73.A Generic State Classification Algorithm for Non-Invasive Hemoglobin Assessment Methods

机译：非侵入性血红蛋白评估方法的通用状态分类算法
- 作者：Kumar R.;Ranganathan H.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第2期
- Machine Learning;
- Classification;
- Z-Statistic;
- F-Measure;
- Confusion matrix;
74.Modelling and Prediction of R_a of EN31 in Wire Electrical Discharge Machining using ANN and MSE Approach

机译：基于ANN和MSE的放电加工中EN31 R_a的建模与预测。
- 作者：U. K. Vates;N. K. Singh;R. V. Singh
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第2期
- BPANN;
- ANOVA;
- RMSE;
75.High Capacity and High Secure Video Encryption based on Hopfield Chaotic Neural Network

机译：基于Hopfield混沌神经网络的大容量高安全视频加密。
- 作者：T. Vino;E. Logashanmugam
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第2期
76.Providing an Optimal Price Demand Model by Cloud Cache

机译：通过云缓存提供最佳价格需求模型
- 作者：R. Rathi;P. Visvanathan;R. Kanchana
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第1期
- Cloud cache;
- Static pricing;
- Cache clear;
77.Prevention of Jamming Attacks Using Packet Hiding Techniques

机译：使用数据包隐藏技术防止干扰攻击
- 作者：Anusha K.;Sathiyamoorthy E.;Ezhilmaran D.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第1期
78.Simulated Study on the Effect of Camber and Toe on the Handling Characteristics of a Car during Cornering

机译：弯矩和趾对转弯过程中汽车操纵特性影响的模拟研究
- 作者：T. Vijayakumar;V. Ganesh
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第1期
- ADAMS/CAR;
- Camber;
- Toe;
- Tire model parameters;
- Vehicle handling;
- Cornering;
79.Heterogeneity Aware Energy Minimization Workload Scheduling Approach in Cloud Computing

机译：云计算中的异构感知能量最小化工作负荷调度方法
- 作者：V. K. Mohan Raj;R. Shriram
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第1期
- Component;
- Energy consumption;
- Dynamic power management;
- Virtualized data center;
- Performance to power ratio;
80.Optimization of Permutation Flow Shop with Multi-Objective Criteria

机译：多目标准则的置换流水车间优化
- 作者：Pugazhenthi R.;Anthony Xavior M.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第1期
- Flowshop;
- Heuristic;
- Exponential distribution;
- Makespan;
- Optimization;
81.A Novel Adatable Framework to Handle Heterogeneity Issues in WSN Hardware and System Software - A Comparative Analysis and Proposal

机译：一种新颖的可处理WSN硬件和系统软件异质性问题的可调整框架-比较分析和建议
- 作者：Yokesh Babu Sundaresan;Saleem Durai M. A.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第1期
- Heterogeneity;
- Adaptable framework;
- WSN;
- Contiki;
- Mantis;
- TinyOS;
- Kernel;
- Auxiliary and Core libraries;
- Microcontrollers;
- Microprocessors;
82.Lateral Load Resisting Capacity of RC Ductile Framed Structure Using Non Linear Static Analysis

机译：基于非线性静力分析的钢筋混凝土延性框架结构的侧向承载力
- 作者：R. Ponnudurai;K. Swaminathan;S. Nagan
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第2期
- Ductile MRF Buildings;
- Pushover Analysis;
- Equivalent Strut;
- Performance Based Analysis;
- Performance Point;
83.A Miniaturized Circular Microstrip Patch Tri Band Ring Antenna for SATCOM Applications

机译：SATCOM应用的微型圆形微带贴片三频带环形天线
- 作者：B. Priyadharshini;S. Sivasundarapandian
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第2期
- Microstrip patch Antenna;
- Circular Patch;
- Tri Band;
- Directional radiation pattern;
- Radar Applications;
84.Influence of Granite Fines as Sand Replacement in Concrete Mix

机译：花岗岩细粉作为混凝土拌合料中砂的影响
- 作者：P. Rama Mohan Rao;Sriram Abburi;Varun Kottam;Madhav Reddy
- 期刊名称：《International Journal of Mechanics and Solids》 | 2014年第1期
- Granite fines;
- Compressive strength;
- Split tensile strength;
- Replacement;
85.A Numerical Investigation on Performance Enhancement of Air Motor Using Computational Fluid Dynamics

机译：利用计算流体力学提高气动马达性能的数值研究
- 作者：Aezhisai Vallavi. M. S.;Kiranlal. S.;Mohandas Gandhi. N.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第2期
- CFD;
- DOE;
- Injection angle;
- Blade inclination angle;
- Vane;
- Air motors;
86.Optimization of Machining Parameters In Turning Process Using Exergy Analysis

机译：用火用分析法优化车削过程中的加工参数。
- 作者：P. Raghuram;K. Balaji;Karthik S.;Hari Haran R.;Siva Sankar P.;Vimal P.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第2期
- Exergy analysis;
- Chemical exergy;
- Energy;
- Degree of perfection;
- Turning process;
- Design of experiments;
87.Analysis Of Wear On Pan Head Bolt Component And Die Service Life In Hot Forging Process

机译：热锻过程中盘头螺栓组件的磨损及模具寿命分析
- 作者：R. Rajiev;P. Sadagopan
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第1期
- Hot forging;
- Finite Element analysis;
- Wear model;
- Wear coefficient;
88.Experimental Evaluation of Performance and Emission Characteristics of Minimally Processed Ethanol Fuelled HCCI Engine

机译：最少加工乙醇燃料HCCI发动机性能和排放特性的实验评估
- 作者：N. Vinayagam;G. Nagarajan;R. Karthikeyan
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第2期
- HCCI;
- Ethanol;
- Air preheating;
- Performance;
- Combustion and Emission;
89.Variables for Implementing ERP in Supply Chain Management

机译：供应链管理中实施ERP的变量
- 作者：Bhasker Bhargava Sayala;Dipesh Kumar Yadav;Nivedita Chauhan;Ajay Verma
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第1期
- Enterprise Resource Planning;
- Supply Chain Management;
- Customer Relationship Management;
90.Criteria Based Supplier Selection Model By Integer Linear Programming - A Case Study In A Manufacturing Organization

机译：整数线性规划的基于标准的供应商选择模型-以制造企业为例
- 作者：SVS Rajaprasad;P Venkata Chalapathi
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第2期
- Analytic Hierarchy Process (AHP);
- Integer linear programming (ILP);
- Preference weighs;
- Criteria;
- Suppliers;
- Constraints;
91.Experimentation on Performance and Emissions Characteristics of Single Cylinder Four Stroke Spark Ignition Air Cooled Engine by Using Premix Homogeneous Charge Of Hydrogen Gas As Fuel Supplement

机译：以氢气的预混合均质为燃料补充剂的单缸四冲程火花点火空冷发动机性能和排放特性试验
- 作者：Abhijit A. Sur;Prashant R. Walke;M. Basavaraj
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第1期
92.Optimizing The Operating Parameters In Waste Heat Recovery System

机译：优化废热回收系统的运行参数
- 作者：S. Gunabal;B. Sivaraman;R. Sentilkumar
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第1期
- HVAC;
- Heat pipe;
- Waste heat recovery;
- Nanofluids;
93.Effects of Process Conditions of Chemical Vapor Deposition on Silicon Carbide Thin Films for MEMS Applications: A Review

机译：化学气相沉积工艺条件对MEMS应用的碳化硅薄膜的影响
- 作者：Venkatesan Shanmugasundram;Saravanakumar Nesappan
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第1期
- SiC;
- Chemical Vapor Deposition;
- MEMS;
94.A Review of Cutting Force and Optimization In Metal Cutting Process

机译：金属切削过程中切削力的研究及优化
- 作者：Aezhisai Vallavi M. S.;Mohandas Gandhi N.;Velmurugan C.;Dhamodharan N.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第2期
- Cutting Force;
- Vibration;
- Tool Wear;
- Optimizationand Metal Cutting Process;
95.MCMC: A Comparative Analysis of Various parts HTC computing using SUTCAST

机译：MCMC：使用SUTCAST计算HTC各个零件的比较分析
- 作者：G. Pitchayya Pillai;P. Seeni Kannan
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第1期
- Casting;
- Solidification;
- Molding;
- Alloy-Molding;
- Thermal Analysis;
- Shrinkage;
96.Quality Assessment of Drilled Holes in Al 6063 Plate at Sub Zero Temperature

机译：零温度下Al 6063板材钻孔质量评估
- 作者：Shanmugam Murugappan;Sanjivi Arul;Surendran K. Narayanan
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第2期
- Dry drilling;
- Dry ice;
- Cryogenic;
- Sub Zero temperature;
- Hole quality;
- Surface roughness Ra;
- Rz;
- Conicity;
97.Investigations on Solar Dryer with Plain Tube Collector Integrated with Biomass-Backup Heater for Drying Coleus Roots

机译：平顶集热器与生物质备用加热器集成的干燥紫茎根的太阳能干燥机的研究
- 作者：Gunasekaran K.;Shanmugam V.;Suresh P.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第1期
- Bio-mass;
- Coleus roots;
- Plain tube collector;
- Heat transfer;
- Nusselt number;
- Friction factor;
98.Impact of Cryogenic Treatment and Temper to carbide toollife on turning process for Al T-6061

机译：低温处理和回火对硬质合金刀具寿命对Al T-6061车削过程的影响
- 作者：Agus Suprapto;Agus Iswantoko;Ike Widyastuti
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第1期
- Carbide tool;
- Cryogenic treatment;
- Tool life;
- Temper;
- Wearof cutting tool edge;
99.Criticality Analysis and Inventory Cost Reduction For High-Value, High Volume Spares

机译：高价值，大批量备件的关键性分析和库存成本降低
- 作者：Sonujalam. K.;Raghuram. P.
- 期刊名称：《International Journal of Mechanics and Solids》 | 2015年第2期
- Inventory of spares;
- FSN analysis;
- VED analysis;
- ABC analysis;
- Safety stock;
- Annual consumption;
- EOQ;
100.Security Mechanism for Mitigation of Flooding Attack under Group Mobility Model in MANET

机译：MANET组移动模型下减轻洪泛攻击的安全机制。
- 作者：Kashif Kawsar Qadri;Vishali Sharma
- 期刊名称：《International Journal of Mechanics and Solids》 | 2016年第2期
- MANET;
- Flooding Attack;
- AODV;
- PDR;
- Overhead;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号