首页>外文期刊>International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM

International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM

SCIEI

中文名称：国际期刊的材料组成:欧洲科学的官方杂志材料成形,ESAFORM协会

ISSN：1960-6206
出版周期：-

发文量：262

期刊论文

热门论文

年度选择

2021
- 第1期
- 第2期
- 第3期
- 第4期
2020
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2019
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2017
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
2016
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
2015
- 第1期
- 第2期
- 第3期
- 第4期
2014
- 第1期
- 第2期
- 第3期
- 第4期
2011
- 第1期
- 第2期
- 第3期
- 第4期
2010
- 第1期
- 第2期
- 第3期
- 第4期
- 第suppla期
2009
- 第1期
- 第2期
- 第3期
- 第4期

更多>>

全选（0）

1.Phenomenological and crystal plasticity approaches to describe the mechanical behaviour of Ti6Al4V titanium alloy

机译：现象学和晶体可塑性描述Ti6Al4V钛合金力学行为的方法
- 作者：Walid Hammami;Gaetan Gilles;Anne Marie Habraken;Laurent Duchene
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第2期
- Ti6Al4V;
- Crystal plasticity;
- Texture;
- Critical resolved shear stresses;
- Anisotropy;
- Strength differential effect;
2.FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface

机译：基于工具-切屑界面极限剪切应力的识别的钛合金（Ti-6Al-4V）切割的有限元模型
- 作者：Yancheng Zhang;Tarek Mabrouki;Daniel Nelias;Yadong Gong
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第1期
- FE cutting model;
- Limiting shear stress;
- Fracture energy;
- Titanium alloy Ti-6Al-4V;
3.New algorithm for a robust user-independent evaluation of beginning instability for the experimental FLC determination

机译：一种新的算法，可以可靠地独立于用户，评估实验FLC的开始不稳定性
- 作者：W. Volk;Pavel Hora
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第3期
- FLC;
- Local necking;
- Optical detection of strain localizations;
- Nakajima-test;
4.Modelling direction-dependent hardening in magnesium sheet forming simulations

机译：在镁薄板成形模拟中建模与方向有关的硬化
- 作者：Dirk Steglich;Wolfgang Brocks;Jan Bohlen;Frederic Barlat
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第2期
- Finite elements;
- Anisotropy;
- Plasticity;
- Strength differential effect;
- Parameter identification;
5.Mechanical properties and textures of duplex stainless steel rolled worked by asymmetric rolling

机译：非对称轧制双相不锈钢的力学性能和织构
- 作者：Silvia Barella;Carlo Mapelli
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第4期
- Duplex stainless steel;
- Asymmetric rolling;
- Anisotropy;
- Texture;
6.Effect of warm forming conditions on AZ31B flow behaviour and microstructural characteristics

机译：热成型条件对AZ31B流动行为和微观结构特征的影响
- 作者：Daniele Pellegrini;Andrea Ghiotti;Stefania Bruschi
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第2期
- Magnesium alloys;
- Warm forming;
- Flow stress;
- Anisotropy;
- Microstructure;
7.Numerical and experimental studies of the riveting process

机译：铆接过程的数值和实验研究
- 作者：Nanjiang Chen;Richard Ducloux;Christel Pecquet;Julien Malrieux;Maxime Thonnerieux;Min Wan;Jean-Loup Chenot
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第1期
- Rivet;
- Rivet joints;
- Riveting process;
- Numerical simulation;
8.Measurement and analysis of differential work hardening behavior of pure titanium sheet using spline function

机译：用样条函数测量和分析纯钛薄板的不同加工硬化行为
- 作者：Mantaro Ishiki;Toshihiko Kuwabara;Yasuhiro Hayashida
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第2期
- Pure titanium sheet;
- Yield function;
- Differential work hardening;
- Anisotropy;
- Biaxial stress;
9.Modelling of ductile failure in aluminium sheet forming simulation

机译：铝板成形模拟中的延性破坏建模
- 作者：Holger Aretz;Stefan Keller;Rolf Vogt;Olaf Engler
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第2期
- Necking;
- Post-necking;
- Fracture;
- Sheet forming;
- Finite element analysis;
10.Phenomenological modeling of anisotropy induced by evolution of the dislocation structure on the macroscopic and microscopic scale

机译：宏观和微观尺度上位错结构演化引起的各向异性的现象学建模
- 作者：Till Clausmeyer;Ton van den Boogaard;Muhammad Noman;Grygoriy Gershteyn;Mirko Schaper;Bob Svendsen;Swantje Bargmann
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第2期
- Material modeling;
- Microstructural evolution;
- Cross hardening;
- Induced flow anisotropy;
11.Effect of dual swirling plasma arc cutting parameters on kerf characteristics

机译：双旋流等离子弧切割参数对切缝特性的影响
- 作者：Jiayou Wang;Zhengyu Zhu;Conghui He;Feng Yang
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2011年第1期
- Plasma arc cutting;
- Swirling arc;
- Kerf characteristics;
- Cut quality;
- Automatic cutting;
12.On the use of effective limit strains to evaluate the forming severity of sheet metal parts after nonlinear loading

机译：关于使用有效极限应变评估非线性载荷后钣金零件的成形严重性
- 作者：Morteza Nurcheshmeh;Daniel E. Green
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第1期
13.Texture effects on design of Mg biodegradable stents

机译：纹理对镁可生物降解支架设计的影响
- 作者：Maurizio Vedani;Qiang Ge;Wei Wu;Lorenza Petrini
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第1期
- Magnesium alloys;
- Extrusion;
- Texture;
- Twinning;
- Asymmetric behavior;
- Stent expansion;
14.Basis for viscoelastic modelling of polyethylene terephthalate (PET) near Tg with parameter identification from multi-axial elongation experiments

机译：Tg附近的聚对苯二甲酸乙二酯（PET）的粘弹性建模的基础以及多轴延伸实验中的参数识别
- 作者：Yun Mei Luo;Luc Chevalier;Eric Monteiro
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第3期
- Identification;
- Visco-elastic;
- Nonlinear behaviour;
- Experimental uniaxial and biaxial tests;
- Numerical simulation;
15.A strain rate dependent anisotropic hardening model and its validation through deep drawing experiments

机译：应变速率相关的各向异性硬化模型及其通过深冲实验的验证
- 作者：Philip Peters;Niko Manopulo;Christian Lange;Pavel Hora
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- Mild steel;
- 5xxx aluminum;
- Strain rate;
- Anisotropic hardening;
16.Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds

机译：使用形状流形的水平集插值法对深冲过程的回弹进行数值评估
- 作者：Balaji Raghavan;Guenhael Le Quilliec;Piotr Breitkopf;Alain Rassineux;Jean-Marc Roelandt;Pierre Villon
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- Shape optimization;
- Springback;
- Level sets;
- Manifold learning;
- Model reduction;
- Forming;
17.A study of the variations in elastic modulus and its effect on springback prediction

机译：弹性模量变化及其对回弹预测的影响研究
- 作者：S. Chatti;R. Fathallah
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第1期
- Unloading elastic modulus;
- Damage;
- Failure;
- Plasticity;
18.Characterization of rapid PDMS casting technique utilizing molding forms fabricated by 3D rapid prototyping technology (RPT)

机译：利用通过3D快速原型技术（RPT）制作的成型模板来表征快速PDMS铸造技术
- 作者：Attila Bonyar;Hunor Santha;Mate Varga;Balazs Ring;Andras Vitez;Gabor Harsanyi
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- 3D printing;
- RPT;
- Microfluidics;
- PDMS;
19.Ultrasonic welding of thermoplastic composites: a numerical analysis at the mesoscopic scale relating processing parameters, flow of polymer and quality of adhesion

机译：热塑性复合材料的超声波焊接：介观尺度的数值分析，涉及加工参数，聚合物流量和附着力质量
- 作者：Arthur Levy;Steven Le Corre;Arnaud Poitou
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第1期
- Ultrasonic welding;
- Multiphysical modeling;
- Numerical analysis;
- Healing;
- Process parameters influence;
- Geometry effects;
20.Characterization of a superplastic aluminium alloy ALNOVI-U through free inflation tests and inverse analysis

机译：通过自由膨胀试验和反分析表征超塑性铝合金ALNOVI-U
- 作者：D. Sorgente;L. Tricarico
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- Superplasticity;
- Inverse analysis;
- Aluminium alloy;
21.Scorch arisen prediction through elastomer flow in extrusion die

机译：通过挤出模头中弹性体流动产生的焦烧预测
- 作者：J. Launay;N. Allanic;P. Mousseau;R. Muller;R. Deterre
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- Elastomer moulding process;
- Viscous dissipation;
- Scorch;
- Particle tracking;
- Ansys Polyflow;
22.Development of a new failure prediction criterion in sheet metal forming

机译：钣金成形中新的失效预测准则的发展
- 作者：Alexandra Werber;Mathias Liewald;Winfried Nester;Martin Grunbaum;Klaus Wiegand;Jorg Simon;Jurgen Timm;Walter Hotz
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- Forming limit curve;
- Forming limit stress curve;
- Non-linear strain path;
- Prediction of failure;
23.Feeding strategy design for steel 42CrMo in radial-axial ring rolling using processing map

机译：42CrMo钢径向轴向轧制进料策略的工艺图设计。
- 作者：Wujiao Xu;Xiaobing Yang;Zhongyuan Jiang;Qiaoli Wang
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- Radial-axial ring rolling;
- Steel 42CrMo;
- Processing map;
- Feeding strategy;
24.An investigation into thickness distribution in single point incremental forming using sequential limit analysis

机译：基于顺序极限分析的单点增量成形厚度分布研究
- 作者：M. J. Mirnia;B. Mollaei Dariani;H. Vanhove;J. R. Duflou
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
25.Toward an optimisation of the reactive resin transfer molding process: thermo-chemico-mechanical coupled simulations

机译：为了优化反应性树脂传递模塑工艺：热-化学-机械耦合模拟
- 作者：Emmanuelle Abisset-Chavanne;Francisco Chinesta
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- RTM process;
- Multiphysic coupled model;
- Numerical simulations;
26.Stretch blow moulding of PET; structure development and constitutive model

机译：PET拉伸吹塑;结构发展与本构模型
- 作者：N. Billon;M. Picard;E. Gorlier
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第3期
- PET;
- Strain induced crystallisation;
- Microstructure development;
- Constitutive model;
27.Formability improvement with independent die and punch temperature control

机译：独立的模具和冲头温度控制可改善可成型性
- 作者：Reza Bagheriasl;Kamyar Ghavam;Michael J. Worswick
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
28.Microstructural investigation of donor material experiments in friction stir welding

机译：搅拌摩擦焊施主材料实验的微观结构研究
- 作者：J. M. Rice;S. Mandal;A. A. Elmustafa
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- FSW;
- SEM-EDX;
- Microstructure;
29.Semi-analytical approach for plane strain sheet metal forming using a bending-under-tension numerical model

机译：平面弯曲钣金成形的半解析方法
- 作者：Guenhael Le Quilliec;Piotr Breitkopf;Jean-Marc Roelandt;Pierre Juillard
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- Sheet metal forming;
- Springback;
- Reduced model;
- Semi-analytical method;
- Deep-drawing;
- Plane strain;
30.Parametric study of riveted joints

机译：铆接参数化研究
- 作者：Nanjiang Chen;Maxime Thonnerieux;Richard Ducloux;Min Wan;Jean-loup Chenot
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第1期
- Parametric study;
- Riveted joint;
- Mechanical strength;
- Fracture;
- Optimization;
31.Analytical modeling of deformed plain woven thermoplastic composites

机译：变形平织热塑性复合材料的分析模型
- 作者：John R. Smith;Uday K. Vaidya;John K. Johnstone
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- Thermoforming;
- Bilinearly blended coons patch;
- Analytical model;
- Composite deformation;
- Grid strain analysis;
32.Numerical investigations of flat punch molding using a higher order strain gradient plasticity theory

机译：基于高阶应变梯度可塑性理论的平板冲模成形数值研究
- 作者：Suman Guha;Sandeep Sangal;Sumit Basu
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- Flat punch molding;
- Size effects;
- Strain gradient viscoplasticity;
- Finite element method;
33.Modeling and optimization of spring-back in bending process using multiple regression analysis and neural computation

机译：基于多元回归分析和神经计算的弯曲过程回弹建模与优化
- 作者：Reza Teimouri;Hamid Baseri;Behzad Rahmani;Mohammad Bakhshi-Jooybari
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- Bending;
- Spring-back;
- Neural network;
- Imperialist competitive algorithm;
34.POD surrogates for real-time multi-parametric sheet metal forming problems

机译：POD代理解决实时多参数钣金成型问题
- 作者：M. Hamdaoui;G. Le Quilliec;P. Breitkopf;P. Villon
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第3期
- POD;
- Interpolation;
- Kriging;
- Sheet metal forming;
- Real-time;
- Non-intrusive;
35.A simple ductile failure model with application to AA5182 aluminium sheet forming

机译：一个简单的延性破坏模型及其在AA5182铝板成形中的应用
- 作者：Holger Aretz;Stefan Keller;Olaf Engler;Henk-Jan Brinkman
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第3期
- Necking;
- Post-necking;
- Fracture;
- Sheet forming;
- Finite element analysis;
36.Assessment on the performance of distinct stress integration algorithms for complex non-quadratic anisotropic yield criteria

机译：复杂非二次各向异性屈服准则下不同应力积分算法性能的评估
- 作者：T. J. Grilo;R. A. F. Valente;R. J. Alves de Sousa
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- Finite element method;
- Computational plasticity;
- Anisotropic yield criteria;
- Algorithms and implementation;
37.3D digital image correlation measurements during shaping of a non-crimp 3D orthogonal woven E-glass reinforcement

机译：非压接3D正交编织E玻璃增强材料成形过程中的3D数字图像相关性测量
- 作者：Juan Pazmino;Valter Carvelli;Stepan V. Lomov;Bart Van Mieghem;Pascal Lava
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- 3D composite reinforcement;
- Forming;
- 3D digital image correlation;
38.On the effect of numerical noise in approximate optimization of forming processes using numerical simulations

机译：关于数值噪声对数值模拟近似优化成形过程的影响
- 作者：J. H. Wiebenga;A. H. van den Boogaard
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第3期
- Finite element simulations;
- Approximate optimization;
- Numerical noise;
- Regularization;
- Sequential optimization;
39.Shot peen forming of fiber metal laminates on the example of GLARE

机译：以GLARE为例对纤维金属层压板进行喷丸成形
- 作者：C. Russig;M. Bambach;G. Hirt;N. Holtmann
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- Shot peen forming;
- Incremental forming;
- Fiber metal laminate;
- GLARE;
40.The effects of forming history on sheet metal assembly

机译：成形历史对钣金装配的影响
- 作者：Alexander Govik;Ramin Moshfegh;Larsgunnar Nilsson
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第3期
- Finite element simulation;
- Forming;
- Assembly;
- Sheet metal;
- History variables;
- Process chains;
41.A two-pronged approach for springback variability assessment using sparse polynomial chaos expansion and multi-level simulations

机译：使用稀疏多项式混沌展开和多级模拟的回弹变异性评估的两管齐下的方法
- 作者：Jeremy Lebon;Guenhael Le Quilliec;Piotr Breitkopf;Rajan Filomeno Coelho;Pierre Villon
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第3期
42.Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement

机译：使用互锁加强件对带有外壳角的高度双弯曲形状进行实验预成型
- 作者：S. Allaoui;G. Hivet;D. Soulat;A. Wendling;P. Ouagne;S. Chatel
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- Composites;
- RTM;
- Preforming;
- Sheet forming;
- Case corner;
- Defaults;
43.Design optimisation of biaxial tensile test specimen using finite element analysis

机译：基于有限元分析的双轴拉伸试样设计优化
- 作者：P. Tiernan;A. Hannon
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第1期
- Biaxial tensile testing;
- Cruciform specimen;
- Modelling;
44.Prediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements

机译：预测最佳流前速度以最小化双尺度纤维增强材料中空隙的形成
- 作者：Francois LeBel;Amir Ershad Fanaei;Edu Ruiz;Francois Trochu
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第1期
- Liquid composite molding;
- Capillary rise;
- Modified capillary number;
- Penetrativity;
- Void formation;
45.Identification of non uniform thermal contact resistance in automated tape placement process

机译：在自动胶带放置过程中识别不均匀的热接触电阻
- 作者：Anais Barasinski;Adrien Leygue;Eric Soccard;Arnaud Poitou
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- Automated tape placement;
- Thermal contact resistance;
- Thermal modeling;
- Thermoplastic composite material;
46.Fast resolution of incremental forming processes by the Multi-Mesh method. Application to cogging

机译：通过多网格方法快速解决增量成型过程。应用于齿槽
- 作者：Mohamad Ramadan;Lionel Fourment;Hugues Digonnet
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第2期
- Forging;
- Multi-Mesh;
- Multi-physics;
- Coupled problems;
- Cogging;
- Remeshing;
47.Experimental analysis and modeling of the anisotropic response of titanium alloy Ti-X for quasi-static loading at room temperature

机译：钛合金Ti-X在室温下准静态载荷下各向异性响应的实验分析与建模
- 作者：M. Tritschler;A. Butz;D. Helm;G. Falkinger;J. Kiese
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第3期
- Titanium;
- Anisotropy;
- Tension-compression asymmetry;
- Bauschinger effect;
- Springback;
48.First steps towards an advanced simulation of composites manufacturing by automated tape placement

机译：通过自动胶带放置对复合材料制造进行高级模拟的第一步
- 作者：F. Chinesta;A. Leygue;B. Bognet;Ch. Ghnatios;F. Poulhaon;F. Bordeu;A. Barasinski;A. Poitou;S. Chatel;S. Maison-Le-Poec
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第1期
- Composites;
- Automated tape placement;
- Numerical simulation;
- Model order reduction;
- PGD;
49.On the influence of rolling path change on static recrystallization behavior of commercial purity aluminum

机译：轧制路径变化对工业纯铝静态再结晶行为的影响
- 作者：Behrad Koohbor
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第1期
- Commercial purity aluminum;
- Cold rolling;
- Static recrystallization;
- Rolling path;
- Finite element modeling;
50.Study on the forming of sandwich shells with closed-cell foam cores

机译：闭孔泡沫芯三明治壳的成形研究
- 作者：H. Mata;A. D. Santos;M. P. L. Parente;R. A. F. Valente;A. A. Fernandes;R. Natal Jorge
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2014年第4期
- Sandwich structures;
- Hydroforming;
- Mechanical characterization;
- Metal foams;
- Aluminium sheets;
51.Thematic issue: Advanced modeling and innovative processes

机译：主题问题：高级建模和创新流程
- 作者：Valente Robertt;de Sousa Ricardo Alves
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
52.Manifested flatness defect prediction in cold rolling of thin strips

机译：薄带冷轧中表现出的平直度缺陷预测
- 作者：Nakhoul R.;Montmitonnet Pierre;Legrand N.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
- Rolling;
- Thin strips;
- Finite element method;
- Friction;
- Flatness defect;
- Sheet buckling;
- Residual stress;
53.Novel experimental set-up to investigate the wear of coatings for sheet metal forming tools

机译：用于研究钣金成型工具涂层磨损的新型实验装置
- 作者：Ghiotti A.;Bruschi S.;Sgarabotto F.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Sheet metal forming;
- Wear;
- Tribology;
- PVD coating;
54.Pultrusion of a vertical axis wind turbine blade part-II: combining the manufacturing process simulation with a subsequent loading scenario

机译：垂直轴风力涡轮机叶片第二部分的拉挤成型：将制造过程模拟与后续的加载方案相结合
- 作者：Baran Ismet;Hattel Jesper H.;Tutum Cem C.;Akkerman Remko
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Pultrusion process;
- Residual/internal stress;
- Finite element analysis;
- Integrated modelling;
- Thermosetting resin;
55.Influence of anisotropy and lubrication on wrinkling of circular plates using bifurcation theory

机译：分叉理论研究各向异性和润滑对圆板起皱的影响
- 作者：Anarestani S. Samie;Morovvati M. R.;Vaghasloo Y. Alizadeh
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Flange wrinkling;
- Blank holding force;
- Bifurcation theory;
- Anisotropy;
56.Modelling non-quadratic anisotropic yield criteria and mixed isotropic-nonlinear kinematic hardening: analysis of forward- and backward-Euler formulations

机译：建模非二次各向异性屈服准则和各向同性-非线性混合运动硬化：正向和反向欧拉公式分析
- 作者：Grilo T. J.;Valente R. A. F.;de Sousa R. J. Alves
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Anisotropic behaviour;
- Elasto-plasticity;
- Constitutive models;
- Stress integration algorithms;
- Finite element method;
57.Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine

机译：对铣床正交切削中Ti6Al4V切屑形成研究的实验贡献
- 作者：Ducobu F.;Riviere-Lorphevre E.;Filippi E.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Benchmark;
- Chip formation;
- Experiments;
- Milling machine;
- Orthogonal cutting;
- Titanium alloy Ti6Al4V;
58.Numerical simulation on the flow and heat transfer of polymer powder in rotational molding

机译：聚合物粉末在滚塑中流动和传热的数值模拟
- 作者：Huu Thuan Nguyen;Cosson Benoit;Lacrampe Marie France;Krawczak Patricia
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Discrete Element Method;
- Rotational molding;
- Segregation;
- Heat transfer;
59.Multi-scale thermal simulation of polymer crystallization

机译：聚合物结晶的多尺度热模拟
- 作者：Spina R.;Spekowius M.;Hopmann C.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Polymer crystallization;
- Injection moulding;
- Simulation;
- Multi-scale modeling;
60.Models for shear properties/behavior of dry fibrous materials at various scales: a review

机译：各种规模的干纤维材料的剪切特性/行为模型：综述
- 作者：Syerko Elena;Comas-Cardona Sebastien;Binetruy Christophe
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Forming;
- Fabric/textile;
- Shear property/behavior;
- Multiscale modeling;
- Finite element analysis (FEA);
- Energy minimization;
61.Improving geometrical accuracy for flanging by incremental sheet metal forming

机译：通过增量钣金成形来提高翻边的几何精度
- 作者：Voswinckel Holger;Bambach Markus;Hirt Gerhard
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Sheet metal;
- Incremental forming;
- Incremental flanging;
- Adaptive blank holder;
62.Influence of sintering parameters on dynamic mechanical properties of selective laser sintered parts

机译：烧结参数对选择性激光烧结零件动态力学性能的影响
- 作者：Sharma Vishal S.;Singh Sharanjit;Sachdeva Anish;Kumar Parmod
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Sintering;
- Rapid prototyping;
- Process parameters;
63.Infrared heating assisted thermoforming of polypropylene clay nanocomposites

机译：红外加热辅助聚丙烯粘土纳米复合材料的热成型
- 作者：Mohan T. P.;Kanny K.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Thermoforming;
- Nano-structures;
- Mechanical properties;
- Physical properties;
- Thermoplastic resin;
64.Micro-punching of aluminum foil by laser dynamic flexible punching process

机译：激光动态柔性冲压工艺对铝箔进行微冲压
- 作者：Liu Huixia;Lu Mengmeng;Wang Xiao;Shen Zongbao;Gu Chunxing;Gu Yuxuan
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
65.Wear behaviour of PVD coated and cryogenically treated tools for Ti-6Al-4V turning

机译：用于Ti-6Al-4V车削的PVD涂层和低温处理的刀具的磨损行为
- 作者：Strano Matteo;Albertelli Paolo;Chiappini Elio;Tirelli Stefano
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Ti6Al4V;
- Turning;
- Deep cryogenic treatment;
- Magnetron sputtering;
- PVD;
- Titanium alloys;
- Tool wear;
66.Residual stresses and microstructure in Powder Bed Direct Laser Deposition (PB DLD) samples

机译：粉末床直接激光沉积（PB DLD）样品中的残余应力和微观结构
- 作者：Song X.;Xie M.;Hofmann F.;Illston T.;Connolley T.;Reinhard C.;Atwood R. C.;Connor L.;Drakopoulos M.;Frampton L.;Korsunsky A. M.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
67.Study of the ultrasonic compaction process of composite laminates - part I: process modeling

机译：复合材料层压板的超声压制工艺研究-第一部分：工艺建模
- 作者：Justo J.;Graciani E.;Paris F.;Chinesta F.;Avila R.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Composites;
- Ultrasonic compaction;
- Heat generation;
- Modelling;
68.Economic production of load-bearing sheet metal parts with printed strain gages by combining forming and screen printing

机译：通过将成型和丝网印刷相结合，经济地生产带有印刷应变计的承重钣金零件
- 作者：Groche P.;Ibis M.;Hatzfeld C.;Stoeckigt A.;Gerlitzky C.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
- Printed strain gages;
- Plastic electronics;
- Conductive polymers;
- Forming;
- Functional integration;
69.Meshless methods for the simulation of material forming

机译：模拟材料成形的无网格方法
- 作者：Cueto Elias;Chinesta Francisco
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Numerical simulation;
- Meshless methods;
- Forming processes;
70.Mechanical behavior analysis of metallic materials using a Finite Element modeling of the SHPB test, a numerical calibration of the bar's elastic strains and an inverse analysis method

机译：使用SHPB测试的有限元建模，钢筋弹性应变的数值校准和逆分析方法对金属材料进行力学行为分析
- 作者：Gavrus A.;Bucur F.;Rotariu A.;Cananau S.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Severe loadings;
- SHPB test;
- Numerical calibration;
- Inverse analysis;
- Constitutive equation;
71.Spring back evaluation for high and ultra high strength sheet steels with the bending under tension machine

机译：拉伸机弯曲对高，超高强度钢板的回弹评估
- 作者：Melander Arne;Thoors Hakan;Stenberg Niclas;Ning Ma
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Bending under tension;
- Spring back;
- Constitutive model;
- Finite element;
- Steel;
72.Material flow visualization in Friction Stir Welding via particle tracing

机译：通过颗粒追踪可视化摩擦搅拌焊接中的材料流
- 作者：Dialami N.;Chiumenti M.;Cervera M.;Agelet de Saracibar C.;Ponthot J. P.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
- Friction Stir Welding;
- Material flow;
- Particle tracing;
- BES;
- BFECC;
- RK4;
73.On the equivalence between sets of parameters of the yield criterion and the isotropic and kinematic hardening laws

机译：关于屈服准则的参数集与各向同性和运动学硬化定律之间的等价性
- 作者：Prates P. A.;Oliveira M. C.;Fernandes J. V.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Constitutive law parameters;
- Yield criteria;
- Isotropic hardening law;
- Kinematic hardening law;
74.A different approach to estimate the process parameters in tube hydroforming

机译：估计管液压成型工艺参数的另一种方法
- 作者：Hashemi R.;Shirin M. Bostan;Einolghozati M.;Assempour A.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Tube hydro forming;
- Inverse finite element method;
- Forming severity;
- Simulation;
75.Derivation of a forming limit stress diagram from an experimental FLC, and comparison of the two criteria when applied to FE simulation of a pressing using different yield functions

机译：从实验FLC导出成形极限应力图，并比较两个标准在应用于使用不同屈服函数的冲压件有限元模拟时的比较
- 作者：Carr Alan R.;Walker Andy;Combaz Etienne
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
76.Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP

机译：两种预测CFRP高速修整期间刀具磨损和切削力分量的模型的比较
- 作者：Slamani Mohamed;dagger Jean-Francois;Hamedanianpour Hossein
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
- Carbon fiber reinforced polymer (CFRP);
- Trimming;
- Tool wear;
- Cutting force;
- Cutting parameters;
- ANOVA;
77.Processing map for a cast and homogenized near alpha titanium alloy

机译：铸造和均质近α钛合金的加工图
- 作者：Balasundar I.;Raghu T.;Kashyap B. P.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Near alpha titanium alloy;
- Titan 29A;
- IMI 834;
- Thermo-mechanical processing;
- Processing maps;
78.A comparative study of forming limit diagram prediction of tailor welded blanks

机译：拼焊板成形极限图预测的比较研究
- 作者：Safdarian R.;Jorge R. M. Natal;Santos Abel D.;Naeini H. Moslemi;Parente M. P. L.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
- Tailor welded blank (TWB);
- Ductile fracture criteria;
- Forming limit diagram;
- Finite element method (FEM);
79.Kriging surrogates for evolutionary multi-objective optimization of CPU intensive sheet metal forming applications

机译：Kriging替代品可用于CPU密集型钣金成型应用的进化多目标优化
- 作者：Hamdaoui Mohamed;Oujebbour Fatima-Zahra;Habbal Abderrahmane;Breitkopf Piotr;Villon Pierre
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Kriging;
- Evolutionary multi-objective optimisation;
- NSGA-II;
- Sheet metal forming;
- Springback;
- Failure;
80.Experimental and numerical investigation of spiral irradiating scheme for flame forming of a bowl shaped surface

机译：碗形表面火焰成形螺旋辐照方案的实验与数值研究
- 作者：Safari Mehdi;Farzin Mahmoud;Yazdi Pouria
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Flame forming;
- Spiral irradiating scheme;
- Bowl shaped surface;
- Radius of curvature;
81.Transient filling modelling at meso-level for RTM process using a single phase LSM

机译：使用单相LSM在RTM过程的中观水平上进行瞬时填充建模
- 作者：Giavaras A.;Boateng E.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
- Textiles;
- Micro-voids;
- Level set method;
- Free surface modelling;
82.A FEM-DBEM investigation of the influence of process parameters on crack growth in aluminum friction stir welded butt joints

机译：FEM-DBEM研究工艺参数对铝摩擦搅拌对接接头裂纹扩展的影响
- 作者：Carlone Pierpaolo;Citarella Roberto;Lepore Marcello;Palazzo Gaetano S.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Friction stir welding;
- Crack growth;
- Residual stress;
- Process parameters;
- FEM-DBEM;
83.Enhanced formability of thin carbon fiber reinforced plastic sheets in cold/warm embossing with ductile dummy sheets of different thicknesses

机译：碳纤维增强塑料薄板在冷/热压花过程中具有不同厚度的延展性假板增强了可成型性
- 作者：Uriya Yu;Ikeuchi Katsuyoshi;Yanagimoto Jun
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Sheet forming;
- Carbon fiber reinforced plastic;
- Warm forming;
- Formability;
84.Constrained tensile stretching of steel strips under different lubrication: predicting macroscopic strain distributions with microstructural inputs

机译：不同润滑条件下钢带的拉伸拉伸受约束：利用微观结构输入预测宏观应变分布
- 作者：Basavaraj V.;Shekhawat S. K.;Narasimhan K.;Samajdar I.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
85.Investigation of a combined embossing and blanking process using laser shock wave

机译：使用激光冲击波的压花与落料组合工艺的研究
- 作者：Wang Xiao;Zhang Di;Gu Chunxing;Shen Zongbao;Qiu Tangbiao;Gu Yuxuan;Liu Huixia
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
- Laser shock wave;
- Micro embossing;
- Micro blanking;
86.Investigation on the effect of through thickness normal stress on forming limit at elevated temperature by using modified M-K model

机译：用改进的M-K模型研究贯穿厚度法向应力对高温下成形极限的影响
- 作者：Lang Lihui;Cai Gaoshen;Liu Kangning;Alexandrov Sergei;Du Pingmei;Zheng Hang
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
- Through thickness normal stress;
- M-K model;
- Warm hydroforming;
- Constitutive equation;
- FLD;
87.Finite element method simulation of the hot extrusion of a powder metallurgy stainless steel grade

机译：粉末冶金不锈钢牌号热挤压的有限元模拟
- 作者：Sornin D.;Karch A.;Nunes D.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Hot extrusion;
- Powdermetallurgy;
- Finite element method;
- Numerical modeling;
- Oxides dispersed strengthened steel;
88.Tool path generation for single point incremental forming using intelligent sequencing and multi-step mesh morphing techniques

机译：使用智能排序和多步网格变形技术生成单点增量成型的刀具路径
- 作者：Behera Amar Kumar;Lauwers Bert;Duflou Joost R.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Incremental forming;
- Mesh morphing;
- Intelligent sequencing;
- Optimal tool paths;
- STL;
89.Optimization of interlaminar shear strength behavior of anodized and unanodized ARALL composites fabricated through VARTM process

机译：通过VARTM工艺制备的阳极氧化和未阳极氧化的ARALL复合材料的层间剪切强度性能的优化
- 作者：Qaiser Haroon;Umar Suniya;Nasir Ali;Shah Masood;Nauman Saad
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- ARALL;
- T-peel test;
- Interlaminar shear strength;
90.Study of the ultrasonic compaction process of composite laminates-part II: advanced numerical simulation

机译：复合材料层压板的超声压制工艺研究-第二部分：高级数值模拟
- 作者：Justo J.;Chinesta F.;Graciani E.;Ghnatios Ch.;Paris F.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Composites;
- Ultrasonic compaction;
- Heat generation;
- PGD;
91.Steam-bending properties of seven poplar hybrid clones

机译：七个杨树杂种无性系的蒸汽弯曲特性
- 作者：Kuljich Svetka;Caceres Claudia B.;Hernandez Roger E.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Steam-bending;
- Poplar Hybrid;
- Clone;
92.Numerical simulation of extruded clay paste compression

机译：挤塑黏土压缩的数值模拟
- 作者：Vignes Jeremie;Schmidt Fabrice;Dusserre Gilles;Dalmasso Jean Frederic
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Clay forming;
- Numerical simulation;
- Constitutive law;
- Free compression test;
- Inverse analysis;
93.Analytical and numerical modeling of light scattering in composite transmission laser welding process

机译：复合透射激光焊接过程中光散射的解析和数值模型
- 作者：Akue Asseko Andre Chateau;Cosson Benoit;Deleglise Mylene;Schmidt Fabrice;Le Maoult Yannick;Lafranche Eric
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Laser welding;
- Ray tracing;
- Light scattering;
- Thermoplastics composites;
- Continuous fiber composites;
94.Formability of AA3003 brazing sheet at elevated temperatures: limiting dome height experiments and determination of forming limit diagrams

机译：AA3003钎焊板在高温下的可成形性：极限拱顶高度实验和成形极限图的确定
- 作者：Bagheriasl Reza;Worswick Michael J.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
95.Comparing faceted and smoothed tool surface descriptions in sheet metal forming simulation

机译：在钣金成型仿真中比较多面和平滑的工具表面描述
- 作者：Neto D. M.;Oliveira M. C.;Alves J. L.;Menezes L. F.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第4期
- Sheet metal forming;
- Finite element method;
- Contact mechanics;
- Tool surface description;
- Surface smoothing;
96.Pultrusion of a vertical axis wind turbine blade part-I: 3D thermo-chemical process simulation

机译：垂直轴风力涡轮机叶片拉挤成型-I：3D热化学过程仿真
- 作者：Baran Ismet;Tutum Cem C.;Hattel Jesper H.;Akkerman Remko
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Pultrusion process;
- Curing;
- Finite element analysis;
- NACA0018 airfoil;
- Thermosetting resin;
97.Parallel finite element tool to predict distortion induced by initial residual stresses during machining of aeronautical parts

机译：并行有限元工具，可预测航空零件加工过程中初始残余应力引起的变形
- 作者：Cerutti X.;Mocellin K.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第2期
- Finite element;
- Machining;
- Distortion;
- Residual stresses;
- AIRWARE (R) 2050 alloy;
98.Effect of using eletromagnetic stirring on AISI 1025 steel forged flanges

机译：使用电磁搅拌对AISI 1025锻钢法兰的影响
- 作者：Yurgel Charles Chemale;Lora Fabio Andre;Silva de Oliveira Carlos Augusto;Schaeffer Lirio
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- AISI 1025 steel;
- Electromagnetic stirring;
- Hot forging;
- Continuous ingot;
99.3D Modeling of squeeze flows occurring in composite laminates

机译：复合材料层压板中发生的挤压流动的3D建模
- 作者：Ghnatios Chady;Chinesta Francisco;Binetruy Christophe
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第1期
- Squeeze flow;
- Composite laminates;
- Proper Generalized Decomposition;
100.A stabilized formulation with maximum entropy meshfree approximants for viscoplastic flow simulation in metal forming

机译：具有最大熵无网格近似值的稳定配方，用于金属成形中的粘塑性流动模拟
- 作者：Greco F.;Filice L.;Peco C.;Arroyo M.
- 期刊名称：《International Journal of Material Forming: Official Journal of the European Scientific Association for Material Forming - ESAFORM》 | 2015年第3期
- Maximum entropy;
- Metal forming;
- Viscoplasticity;
- Stabilization;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号