首页>外文期刊>International Journal of Manufacturing Science and Technology

International Journal of Manufacturing Science and Technology

中文名称：国际制造科学杂志》上技术

ISSN：0973-5496
出版周期：Semiannual

发文量：94

期刊论文

热门论文

年度选择

2021
- 第1期
- 第2期
2020
- 第1期
- 第2期
2019
- 第1期
- 第2期
2018
- 第1期
- 第2期
2016
- 第1期
- 第2期
2015
- 第1期
- 第2期
2014
- 第1期
- 第2期
2013
- 第1期
- 第2期
2012
- 第1期
- 第2期
2011
- 第1期
- 第2期
2010
- 第1期
- 第2期
2009
- 第1期

更多>>

全选（0）

1.Cost Based Algorithm for Designing JIT-Kanban Manufacturing System with Multi-Product

机译：基于成本基于成本的多产品设计JIT-KANBAN制造系统算法
- 作者：C. SENDIL KUMAR;R. PANNEERSELVAM
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第2期
- JIT-Kanban;
- Measures of performance;
- Simulation;
- Multi-product;
2.Quantitative Evaluation of Virtual Private Networks and its Implications for Communication Security in Industrial Protocols

机译：虚拟私有网络的定量评估及其在工业协议中通信安全的影响
- 作者：Sanaz Rahimi;Mehdi Zargham
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第1期
3.3D Simulation Study of a Receiver on a Solar Power Tower

机译：太阳能电塔接收器的3D仿真研究
- 作者：M. Hazmoune;B. Aour;A. Bouhallassa;S. Lecheheb;M. Laissaoui;A. Hamidat
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第1期
- 3D-simulation;
- Solar power tower;
- Solar receivers;
- Flow and heat transfer;
4.Study and Design of a Mobile Solar Refrigerator Isolated by Ecological Materials

机译：生态材料隔离的移动太阳冰箱的研究与设计
- 作者：S. Sair;A. Oushabi;O. Tanane;Y. Abboud;L. Bih;M. Bouhamidi;A. El Bouari
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第1期
- Solar cooling;
- Photovoltaic systems;
- Thermal insulation;
- Wood date palm;
- Etc;
5.A Quality Metric for Wrapper Methods in Multiclass Subject Invariant Brain Computer Interfaces

机译：多种子体主体不变大脑电脑接口包装方法的质量指标
- 作者：Vikas Gottemukkula;Jesse Sherwood;Reza Derakhshani
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第1期
6.The Performance Study of Parabolic Trough Concentrator Using a New RT3D-4R Method

机译：抛物面槽浓缩器使用新型RT3D-4R方法的性能研究
- 作者：Houcine Ahlem;Maatallah Taher;El Alimi Souheil;Ben Nasrallah Sassi
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第1期
- Trough concentrator;
- Optical performance;
- Heat flux density;
- Absorber;
- Receiver;
- Etc;
7.New Approach for Prioritization of Failure Modes in Design FMEA

机译：设计FMEA失效模式优先级的新方法
- 作者：SELLAPPAN NARAYANAGOUNDER;KARUPPUSAMI GURUSAMI
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第2期
- Failure mode and effects analysis;
- Risk priority code;
- Critical failure mode;
- Analysis of variance;
8.Design and Development of 8kW Solid State Transmit Receive Module for Gadanki Ionospheric Radar Interferometer

机译：GADANKI电离层雷达干涉仪8kW固态发射接收模块的设计与开发
- 作者：M. Durga Rao;I. Srinivasa Rao;P. Kamaraj;R. Jagadeesh Kannan;A. Jayaraman
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第2期
- TR module;
- Ionospheric radar;
- Solid state;
- Digital attenuator;
- Power combiner;
9.Performance Analysis of a Screw Plant Using Matlab-Tool

机译：使用MATLAB工具的螺杆厂的性能分析
- 作者：DEEPIKA GARG;JAI SINGH;KULDEEP KUMAR
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第2期
- Availability;
- Reliability;
- Differential equations;
- Markov process;
- Steady state;
- Matlab tool;
10.VLSI Circuit of Cortical Neuron Applied with Bias Adaptation

机译：用偏置适应施用皮质神经元的VLSI电路
- 作者：Anirudha Singha;Jyotirmoy Pathak
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第2期
- Neuron circuit;
- Membrane potential;
- Slow variable;
- Bias adaptation;
- Spiking and bursting;
11.Design and Simulation of Stand Alone Closed Loop IRES for Remote Areas

机译：用于偏远地区独立闭环IRE的设计和仿真
- 作者：S. D. Kaushik;T. S. Kishore;M. M. Susanna
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第1期
- Solar system;
- Wind system;
- Inverter;
- Closed loop operation;
- IRES;
12.On Strategic Coordination

机译：论战略协调
- 作者：Henry Hexmoor
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第1期
- Agents;
- Collaboration;
- Coordination;
- Game theory;
13.An Algebra to Represent Task Flow Models

机译：代数代表任务流模型
- 作者：Carlos Alberto Fernandez-y-Fernandez;Anthony J. H. Simons
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第1期
- Formal specification;
- Software modelling;
- Lightweight formal methods;
14.Power Control Approach for a Variable-Speed Wind Turbine with PMSG

机译：具有PMSG的变速风力涡轮机的功率控制方法
- 作者：M. Rambabu;G. V. Nageshkumar;S. Siva Nagaraju
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第1期
15.Constraint Propagation Tree for the Realization of a Computing with Word Based Question Answering System

机译：约束传播树实现基于Word基于Word的问题应答系统的计算
- 作者：Elham S. Khorasani;Shahram Rahimi
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第1期
- Computing with words;
- Question answering;
- Backward reasoning;
- Constrain propagation tree;
16.Effects of Intangibles on Organization's Performance Escalation

机译：无形资产对组织性能升级的影响
- 作者：RAJESHWAR SAHAI;SANDEEP GROVER
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第2期
- Intellectual capital;
- Ergonomic environment;
- Hunan machine interaction and return on investments;
17.Higher Order Sliding Mode Control of Electromagnetic Suspension System

机译：电磁悬架系统的高阶滑动模式控制
- 作者：Polamraju V. S. Sobhan;M. Subba Rao;M. V. Sudarsan;D. Manikanta Swamy
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第1期
- Electromagnetic suspension system;
- HOSMC;
- Suspension and stability;
18.Case Study On Blood Flow Over NFRPC Bone Attached Plate Using Computational Fluid Dynamics

机译：利用计算流体动力学对NFRPC骨附着板血流的案例研究
- 作者：D. Chandramohan;K. Marimuthu
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2016年第2期
- Thermal stress analysis;
- CFD;
- Agave sisalana;
- Hibiscus sabdariffa;
19.Study of Die Punch for Enhancing Life: A Review

机译：增强生活的模切研究：综述
- 作者：P. M. Wanjari;M. D. Pasarkar;D. J. Tidke;S. B. Jaju
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2016年第2期
- Clearance;
- Punch Geometry;
- Punch life;
- Shear angle;
20.Investigation of Free Oscillations of Cylinder Containing a Compressible Fluid

机译：含有可压缩液的气缸自由振荡的研究
- 作者：A. I. Seyfullayev;G. A. Mamedova;M. A. Rustamova;Eynatollah A. Taheri
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2016年第2期
- Tension;
- Vibration;
- Wave;
- Frequency;
- Density;
- Shell;
21.Error Evaluation for Static Structural Analysis Using Numerical Methods

机译：使用数值方法进行静态结构分析的误差评估
- 作者：A. B. Deoghare;Ajinkya Patil;Nitin Sawarkar;Kiran Zade
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2016年第2期
- Numerical methods;
- Field variable;
- One dimensional continuum;
22.Investigation of Damping in Welded Cantilever Beams

机译：焊接悬臂梁阻尼调查
- 作者：R. C. Mohanty;B. Singh;B. K. Nanda
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2016年第2期
- Slip damping;
- Finite element method;
- Tack welding;
- Frequency;
- Length;
- Thickness;
- Amplitude;
23.Link Connectivity: A New Approach to Detection of Isomorphism and Inversions of Plannar Kinematic Chains/Mechanisms

机译：链接连接：一种检测体形和平面运动链的反相的新方法
- 作者：S. R. Madan;Sushant Mahendru;Anjali Mahendru
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2016年第2期
- Kinematic chain;
- Distinct inversions;
- Degree of freedom;
- Isomorphism;
- Binary/Ternary/Quaternary link;
24.Development of A New Bio-degradable Friction Material for Brake Pads from Palm Kernel Shell

机译：从棕榈仁壳的制动垫进行新的生物可降解摩擦材料的开发
- 作者：Dareddy Ramana Reddy;Swadesh Kumar Singh;Balu Naik Banoth
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2015年第2期
- Bio friction material;
- Material substitution;
- Brake pads;
25.Experimental Investigation on Surface Quality in Hard Turning

机译：硬转向表面质量的实验研究
- 作者：T. Alwarsamy;N. Sangeetha;S. Vetrivel
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2015年第2期
- Hard turning;
- Surface roughness;
- Surface quality;
- ANOVA;
- Validation;
26.Process and Parameter Optimization in a Foundry Unit for the Improvement in Production Yield

机译：铸造厂的工艺和参数优化，提高生产产量
- 作者：P. Venkataramaiah
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2015年第2期
- SPC;
- Taguchi method;
- Pareto analysis;
- Cause and effect analysis;
- Grey relational analysis;
27.Design of Row Based Flexible Manufacturing Systems

机译：基于行的灵活制造系统设计
- 作者：C. Srinivas;K. Ramji;B. Satyanarayana;R. Naveen
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2015年第2期
- Flexible manufacturing system;
- Ant Colony Optimization;
- Design. Layout;
28.A Numerical Analysis of Residual Stresses in V-Butt Weld Joint of Two Similar Aluminum Alloy Plates

机译：两种类似铝合金板V-Butt焊接接头残余应力的数值分析
- 作者：Gurinder Singh Brar;Gurdeep Singh
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2015年第2期
- Finite element analysis;
- Residual stresses;
- V-butt weld;
- Aluminum alloy 6082-T6;
- Metal inert gas;
29.A Particularity of the MULTI-POINT Mass Model of Turning and Boring Machine-tools

机译：转动和镗床 - 工具多点质量模型的特殊性
- 作者：Gerard MBOBDA;Roger THUIDJAN;Julius NASHIPU
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2015年第2期
- Astatic mechanical Structure;
- Boring;
- Foundation;
- Disturbances;
- Turning;
30.On an Approach in Fighting Against the Vibrations Transmitted from the Ground to Precision Machine-tools

机译：以抗击地面传递到精密机床的振动的方法
- 作者：Gerard MBOBDA;Roger TCHUIDJAN;Julius NASHIPU
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2015年第2期
- Astatism;
- Foundation;
- Invariance;
- Level of Invariance;
- Optimization;
- Stability;
- Turning;
31.Data Security in Cloud Computing by using Three Tier Method

机译：使用三层方法云计算中的数据安全性
- 作者：Syed Ismail A.;Asha S.
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第1期
- Data security;
- Data integrity;
- Data correctness;
- Data control;
- Access control;
32.A Survey on Multi-Feature Hand Biometrics Recognition

机译：多特征手工生物识别识别调查
- 作者：Gokulakrishnan E.;Malathi G.
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第1期
- Hand;
- Palm print;
- Finger print;
- SVM;
- Random transfer;
- Contour coding;
- Hand feature;
- Biometrics;
- Hand shape;
33.A GRASP Algorithm for Multi-Objective Flexible Job-Shop Scheduling Problems

机译：一种掌握多目标灵活作业商店调度问题的算法
- 作者：M. RAJKUMAR;P. ASOKAN;V. VAMSIKRISHNA;S. SATHISHKUMAR
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第2期
- Flexible job-shop scheduling;
- GRASP;
- Makespan;
- Total workload;
- Maximum workload;
34.A Genetic Algorithm inspired Routing Protocol for Wireless Sensor Networks

机译：遗传算法启发无线传感器网络路由协议
- 作者：Ayon Chakraborty;Swarup Kumar Mitra;Mrinal Kanti Naskar
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第1期
- Network lifetime;
- Wireless sensor networks;
- Routing chain;
- Genetic algorithm;
- Simulated annealing;
35.Mathematical Model of an Azimuthal-Elevation Tracking System of Small Scale Heliostat

机译：小规模光晕矫正器的三级高度跟踪系统数学模型
- 作者：M. Debbache;A. Takilalte;O. Mahfoud;H. Karoua;S. Bouaichaoui;M. Laissaoui;A. Hamidat
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第1期
- Heliostat;
- Tracking system;
- Mathematical model;
- Control;
- Etc;
36.Experimental Validation of a Quaternion-based Attitude Estimation with Direct Input to a Quadcopter (UAVs) Control System

机译：基于四端输入到Quadcopter（无人机）控制系统的态度验证的实验验证
- 作者：M. Anto Bennet;G. Sankar Babu;B. Shalini;K. Srilakshmi;S. Dhivya
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第2期
37.Investigation on Remote Verification Scheme Applying Biometrics in Wireless Networks using Steganographic Method

机译：用书签方法对远程验证方案应用生物识别方法的研究
- 作者：Bestley Joe S;Mathan N
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第2期
- Image processing;
- Biometrics;
- Steganographic method;
- Remote verification;
- Wireless networks;
38.Modeling, Identification and Control of Nonlinear System Based on Adaptive Particle Swarm Optimization

机译：基于自适应粒子群优化的非线性系统建模，识别和控制
- 作者：Jaouher Chrouta;Wael Chakchouk;Abderrahmen Zaafouri;Mohamed Jemli
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第1期
- Modeling;
- Identification;
- Takagi-Sugeno;
- FCM algorithm;
- Particle swarm optimization;
39.Throughput Maximization of a Steel Melting Shop - An Application of Industrial Engineering Techniques

机译：钢熔化店的吞吐量最大化 - 一种工业工程技术的应用
- 作者：JAGATHY RAJ V. P.;ACHARYA D.
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第2期
- Output improvement;
- Simulation;
- Modeling;
- Industrial engg;
- Steel plant;
40.Optimal Sizing of Stand-Alone Hybrid PV-Diesel-Battery System Using PSO and the ε-Constraint Method

机译：使用PSO和ε-约束法的独立混合PV-柴油机系统最佳尺寸
- 作者：F. Fodhil;A. Hamidat;O. Nadjemi
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第1期
- Hybrid;
- PV;
- PSO;
- ε-constraint;
- Optimization;
41.Intrusion Detection Model using Integration of Supervised Classifiers Voted by Weighted Majority Algorithm

机译：利用加权多数算法投票的监督分类器集成的入侵检测模型
- 作者：Jilta Thomas;I. Sumaiya Thaseen;Letchumanan Chockalingam
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第1期
- Accuracy;
- Decision tree;
- Intrusion;
- Support vector machine;
- Weighted majority voting;
42.Quadrotor Unmanned Aerial Vehicle, Dynamics and Control Strategy for Tracking a Desired Trajectory

机译：Quadrotor无人驾驶车辆，动态和控制策略跟踪所需的轨迹
- 作者：Salah Nasr;Kais Bouallegue;Hassen Mekki;Sundarapandian Vaidyanathan
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第1期
- PID controller;
- Quadrotor UAV;
- Hovering;
- Model;
- Simulation;
43.Comparative Study of Evolutionary Techniques for Design of Cellular Manufacturing Systems

机译：蜂窝制造系统设计进化技术的比较研究
- 作者：A. MURUGANANDAM;G. PRABHAKARAN;R. V. MURALI
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第2期
- Cellular manufacturing system;
- Genetic algorithm;
- Particle swarm optimization;
- Meta-heuristic approach;
44.ERP and CRM Implementations in Indian Auto Component Industries for Cost Arbitrage and Global Competitiveness

机译：ERP和CRM在印度汽车组件行业实现成本套利和全球竞争力
- 作者：RAJESH BUKTAR;GOPAKUMARAN THAMPI
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第2期
- Enterprise resource planning (ERP);
- Customer relationship management (CRM);
- Cost arbitrage;
45.Biogas Electricity Generation from Biomass using IC Engine

机译：使用IC发动机从生物量发电的沼气发电
- 作者：Krishna Kumar M;Sreejith Kailas T;Ilango K;Manjula G. Nair
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第2期
- Biogas;
- PMSG;
- Storage tank;
- IC engine;
- Anaerobic digester;
46.Profile of the Financial Performance of Family Enterprises in the Colombian Graphic Industry

机译：哥伦比亚图形产业家族企业财务表现的概况
- 作者：Jaime-Cifuentes Rueda;Mercedes Gaitan-Angulo;Amelec Viloria;Paula Robayo Acuna
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2019年第2期
- Financial performance;
- Family business;
- Non-Family business;
- Printing industry and graphic communication;
47.Implementation of Lean Manufacturing for Engine Valves

机译：发动机阀精益制造的实施
- 作者：S. GAJENDRAN;S. SAMPATH KUMAR
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2018年第2期
- Lean manufacturing;
- Value stream mapping (VSM);
- Takt time;
48.DEVELOPING A POLYMERIC MICROCANTILEVER PLATFORM TECHNOLOGY FOR BIOSENSING APPLICATIONS

机译：开发用于生物传感应用的聚合物微静电平台技术
- 作者：Seena V.;Nitin S. Kale;Sudip Nag;Manoj Joshi;Soumyo Mukherji;V. Ramgopal Rao
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
- Biosensing;
- Microcantilever;
- Gauge factor;
- Young's modulus;
- Piezoresistor;
- Polymer;
49.Link Connectivity: A New Approach to Detection of Isomorphism and Inversions of Plannar Kinematic Chains/Mechanisms

机译：链路连接：一种检测同构和保证载体运动链/机制的新方法
- 作者：S. R. Madan;Sushant Mahendru;Anjali Mahendru
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2016年第2期
- Kinematic chain;
- Distinct inversions;
- Degree of freedom;
- Isomorphism;
- Binary/Ternary/Quaternary link;
50.OPTIMAL DESIGN OF MINIATURE GRIPPERS AND THEIR PROTOTYPING WITH SPRING STEEL AND PDMS

机译：微型夹持器的最佳设计及春钢和PDMS的原型设计
- 作者：Deepak K. Sahu;G. K. Ananthasuresh
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
- Micro-gripper;
- Micromanipulation;
- Topology optimization;
- Manufacturing constraints;
51.Investigation of Damping in Welded Cantilever Beams

机译：焊接悬臂梁阻尼调查
- 作者：R. C. Mohanty;B. Singh;B. K. Nanda
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2016年第2期
- Slip damping;
- Finite element method;
- Tack welding;
- Frequency;
- Length;
- Thickness;
- Amplitude;
52.OPTICAL AND STRUCTURAL PROPERTIES OF O_2 ION BOMBARDED CdTe THIN FILM

机译：O_2离子轰击CdTe薄膜的光学和结构性能
- 作者：S. Shanmugan;S. Balaji;N. Sankarasubramanian
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
- CdTe;
- Electron beam evaporation;
- Ion bombardment;
53.EFFECT OF PROCESS INDUCED VARIATIONS ON PERFORMANCE CHARACTERISTICS OF A DUAL MASS VIBRATORY MEMS GYROSCOPE

机译：工艺诱导变化对双重质量振动MEMS陀螺性能特征的变化
- 作者：K. A. Lohar;Venkatesh K. P.;Rudra Pratap
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
- PolyMUMPs;
- SOIG;
- Surface micromachining;
- Residual stress;
- Tuning fork gyroscope;
- Sensitivity;
- Bandwidth;
- Range and resolution;
54.REALISATION OF TUNABLE CAPACITORS USING (Bi_(1.5)Zn_(0.5))(Zn_(0.5)Nb_(1.5))O_7 THIN FILMS

机译：使用（Bi_（1.5）Zn_（0.5））（Zn_（0.5）Nb_（1.5））O_7薄膜的实现（Bi_（1.5））
- 作者：K. Sudheendran;K. C. James Raju
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
- Bismuth zinc niobate;
- Capacitors;
- Dielectric properties;
- Tunability;
55.EXPERIMENTAL AND NUMERICAL INVESTIGATION ON CONVECTIVE HEAT TRANSFER COEFFICIENT FOR THE TURBULENT FLOW THROUGH PIPE USING NANOFLUID

机译：用纳米流体对湍流流动对流传热系数的实验性和数值研究
- 作者：S. P. Pendalwar;U. V. Bhandarkar;S. V. Prabhu
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
56.DSMC SIMULATIONS OF GAS FLOWS THROUGH 180 DEGREE HAIRPIN BENDS IN CIRCULAR MICRO-DUCTS

机译：DSMC的气体模拟通过180度发夹弯曲圆形微管
- 作者：Avik Sarkar;Suman Chakraborty
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
57.AN ULTRA-STABLE Cu NANOWIRE UNDER THERMO-MECHANICAL LOADING: A MOLECULAR DYNAMIC STUDY

机译：热机械载荷下的超稳定Cu纳米线：分子动态研究
- 作者：Vijay Kumar Sutrakar;D. Roy Mahapatra
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
- Molecular dynamic;
- Nanowire;
- Strain rate;
- Temperature;
- Mechanical properties;
58.THERMAL ANALYSIS OF MICROHEATERS USING MECHANICAL DYNAMIC RESPONSE

机译：使用机械动态响应的微热分析
- 作者：Balaji Jayaraman;Navakanta Bhat;Rudra Pratap
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
- Microheater;
- Time constant;
- Frequency response;
- Laser vibrometer;
- 3dB frequency;
59.UNIVERSAL CAPACITANCE SENSOR

机译：通用电容传感器
- 作者：Santosh Hegde Thejas;Navakanta Bhat
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2020年第2期
- Capacitance sensor;
- CTV;
- Modulation;
- Accelerometer;
- Gyroscope;
- Microphone;
60.A Survey on QOS Parameters in Cognitive Radio with Swarm Intelligence Optimization

机译：A Survey on QOS Parameters in Cognitive Radio with Swarm Intelligence Optimization
- 作者：Vibhuti Rana;P. S Mundra
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第2期
- Cognitive radio;
- Quality of services;
- Ant colony optimization;
- Particle swarm optimization;
61.Throughput on UDP for Multi File Size

机译：Throughput on UDP for Multi File Size
- 作者：T. Vengatesh;S. Thabasu Kannan
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第2期
- Throughput;
- UDP window size;
- Protocol performance;
- IPV6;
62.Gender Inequality and Women's Healthin India: A Study

机译：Gender Inequality and Women's Healthin India: A Study
- 作者：Iffat Ameer
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第2期
- Gender inequality;
- Women's health;
- Access;
- Discrimination;
- Healthcare;
63.DCAM: Discrete Control Based Automatic Management for Reconfiguring FPGA Applications

机译：DCAM: Discrete Control Based Automatic Management for Reconfiguring FPGA Applications
- 作者：C. Subashini;K. Senthil Kumar
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第1期
- Hardware architecture;
- Discrete control algorithm;
- FPGA platform;
- Hardware programming;
- Reconfigurable FPGA;
64.Adaptation of the General Maturity Model of Knowledge Management (G-KMMM)

机译：Adaptation of the General Maturity Model of Knowledge Management (G-KMMM)
- 作者：Luis Montanez-Carrillo;Jenny-Paola Lis-Gutierrez;Janitza Ariza-SalazarAmelec ViloriaMercedes Gaitan-AnguloManuel-Ignacio Balaguera-Jimenez
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第1期
- Knowledge management maturity models;
- Maturity levels;
- Education;
- Institutions of higher education;
65.A Hybrid Model for Selecting Improvement Projects: a Case Study in Medical Industry

机译：A Hybrid Model for Selecting Improvement Projects: a Case Study in Medical Industry
- 作者：Miguel Ortiz-Barrios;Heriberto Felizzola-Jimenez;Angelica Castaneda-RomeroPedro Lopez-Meza
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第1期
- DEMATEL;
- ANP;
- Medical industry;
- Project selection;
- Multi-criteria decision making;
66.An Enhanced High Performance QuadRank Metasearch Engine

机译：An Enhanced High Performance QuadRank Metasearch Engine
- 作者：Swaraj Paul Chinnaraju;Gunasekaran G;Kumar Narayanan
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第1期
- Metasearch engine;
- Rank aggregation;
- Informational retrieval;
- Web;
- Missing documents;
- Broken link;
- Quadrank;
67.Evaluation on the Usefulness of Texture and Binary Key-Point Features for Multi-Script Identification in Scene Images

机译：Evaluation on the Usefulness of Texture and Binary Key-Point Features for Multi-Script Identification in Scene Images
- 作者：Zaidah Ibrahim;Muthukarupan Annamalai;Dino Isa
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第1期
- BRISK;
- FREAK;
- HOG;
- LBP;
- SURF;
- Multi-script identification;
- KNN and SVM;
68.Cluster Based Mobile Data Gathering Using Minimum Covering Spanning Tree in WSN

机译：Cluster Based Mobile Data Gathering Using Minimum Covering Spanning Tree in WSN
- 作者：K. Vijayalakshmi;J. Martin Leo Manickam
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第2期
- WSN;
- Data gathering;
- Spanning tree;
- Cluster;
- MCST;
69.Integration of Dispatching Algorithm and AHP-TOPSIS Method for Flexible Job-Shop Scheduling Problem: A Case Study from the Apparel Industry

机译：Integration of Dispatching Algorithm and AHP-TOPSIS Method for Flexible Job-Shop Scheduling Problem: A Case Study from the Apparel Industry
- 作者：Miguel Ortiz-Barrios;Dionicio Neira-Rodado;Genett JimenezPedro Lopez-Meza
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第1期
- Flexible job-Shop scheduling;
- Dispatching algorithm;
- Analytic hierarchy process (AHP);
- TOPSIS;
- Apparel industry;
70.Design and Develop a Novel DC-DC Power Converter using SUGAR Simulator

机译：Design and Develop a Novel DC-DC Power Converter using SUGAR Simulator
- 作者：S. Sathya;M. Anand
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第1期
- DC-DC converter;
- Micro-Electro-Mechanical-System;
- Mechanical switches;
71.Analysis of Organizational Personality Traits Perceived by Future Employees

机译：Analysis of Organizational Personality Traits Perceived by Future Employees
- 作者：Karan Sabharwal;Madhukar Pandey
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第2期
- Employee perception;
- World class organisation;
- Innovation;
- Thrift;
- Dominance;
- Etc;
72.Economic Load Dispatch with Optimal Power Flow Using Modified PSO

机译：Economic Load Dispatch with Optimal Power Flow Using Modified PSO
- 作者：A. Parthasarathy;R. Dhanasekaran
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第1期
- Economic load dispatch;
- Optimal power flow;
- Modified particle swarm optimization (MPSO);
73.Position Based Opportunistic Routing Protocol for Node Auto Configuration in MANETS

机译：Position Based Opportunistic Routing Protocol for Node Auto Configuration in MANETS
- 作者：Vijayalakshmi Ambati;Gandharba Swain
- 期刊名称：《International Journal of Manufacturing Science and Technology》 | 2021年第2期
- MANET;
- Position based opportunistic routing;
- Node auto configuration;
- AODV;
- Clustering;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号