首页>外文期刊>International Journal of Fluid Engineering

International Journal of Fluid Engineering

中文名称：流体工程的国际期刊

ISSN：0974-3138
出版周期：Semiannual

发文量：30

期刊论文

热门论文

年度选择

2022
- 第1期
- 第2期
2021
- 第1期
- 第2期
2020
- 第1期
- 第2期
2019
- 第1期
- 第2期
2018
- 第1期
- 第2期
2017
- 第1期
- 第2期
2016
- 第1期
- 第2期
2015
- 第1期
- 第2期

更多>>

全选（0）

1.Machining A Component Using Vision Based 3-Axis Cartesian Robot

机译：使用基于视觉的3轴笛卡尔机器人加工零件
- 作者：Bhagyashree Das;M.R Stalin John
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第2期
2.Comparative Study of Impact Properties of Coir & Aloe Vera Based Composites With GFRP

机译：GFRP对椰壳和芦荟复合材料冲击性能的比较研究
- 作者：Sudha J;Harish Kumar Padmakumar;Ranjani R;Sheela Ramani G;Naviyarasan M
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第2期
- Bio composites;
- Aloe vera;
- Coir;
- GFRP;
- impact strength;
3.Role of Professional Variables in the Job Satisfaction of Nurses Working in the Private Hospitals in Chennai

机译：专业变量在钦奈私立医院工作的护士的工作满意度中的作用
- 作者：Dr. Y. Lokeswara Choudary;Dr. B. Madhavan
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第1期
- Dissatisfaction-Positive measures-Quality of services-Health care industry-Customer;
4.Optimization of Process parameters in Sleeve Synchronizer Groove turning (Hard turning) for better surface finish and Productivity using TGRA - A Practical Investigation

机译：使用TGRA优化套筒同步器槽车削（硬车削）中的工艺参数以提高表面光洁度和生产率-实际研究
- 作者：S.Rajarasalnath;K.Balasubramanian;N.Rajeswari
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第1期
- function;
- parameters;
- Optimization;
5.A Study on Phase Change Material Based Thermal Energy Storage System Using Fuzzy Logic and Ann

机译：基于相变材料的热能存储系统的模糊逻辑与Ann研究
- 作者：K Dharma Reddy;Dr. P Venkataramaiah;P Praveen Kumar
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第2期
- Phase change material (PCM);
- fuzzy logic;
- artificial neural network;
6.Techniques For Noise Addition To Preserve Privacy

机译：噪声添加技术以保护隐私
- 作者：D. Johnny Rajam;A.Viji Amutha Mary
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第1期
- PPDM;
- Obfuscation;
- perturbation;
7.A Study on The Perception of Organizational Climate With Special Reference To SAIL, Salem Steel Plant

机译：专门针对塞勒姆钢铁厂SAIL的组织气候感知研究
- 作者：C.Varadaraju;S.Murugan;M.Selvaraj
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第1期
- Organizational Climate;
- Dimensions;
- Structure;
- Responsibility;
- Warmth and support;
- Reward and recognition;
- Risk taking;
- Conflict;
- Overall identity;
- Questionnaire;
8.Optimal speech scrambling technique for OFDM based system

机译：基于OFDM的最佳语音加扰技术
- 作者：Dhanya G;Dr. J Jayakumari
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第1期
- technique;
- systems;
- division;
9.Real Time Traffic Inference Model for BE Traffic QoS improvement using GT slack in NoC Systems

机译：NoC系统中使用GT松弛度的BE流量QoS实时流量推断模型
- 作者：S. Ramani;J. Sundararajan
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第1期
- presence;
- destination;
- communication;
10.Evolution And Perspectives Of International And Regional Security Institutes In Central Asia

机译：中亚国际和区域安全机构的演变与前景
- 作者：Starkin S.V;Petukhov;A.Y. Lebedeva E.V.;Poskrebasheva E.V
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第1期
- Eurasia;
- Central Asia;
- regional security;
- system of collective security;
- CSTO;
- NATO;
- OSCE;
- CICA;
11.A Study on The Sustaining Leadership In Steel Industry With Special Reference To Sail, Salem Steel Plant

机译：以塞勒河，塞勒姆钢铁厂为标志的钢铁行业可持续领导力研究
- 作者：S.Murugan;C.Varadaraju;M.Selvaraj
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第1期
- Organization;
- Leadership;
- Training and Development;
12.A Real-time remote ICU patient monitoring system using TCP protocol, power line protocol, GSM technology, web publishing and E-mail generation

机译：使用TCP协议，电力线协议，GSM技术，Web发布和电子邮件生成的实时远程ICU患者监护系统
- 作者：D. Shalini;Rajarshee Dhar;Kaushik Bhattacharya
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第1期
- Wireless;
- Remote patient monitoring;
- TCP protocol;
- GSM;
- power line;
- SMTP protocol;
- web publishing;
- heart rate;
- blood pressure;
- ECG;
- ICU;
13.A Content Analysis on Man vs. Machine in News Selection

机译：新闻选择中人与机器的内容分析
- 作者：S.Nagarathinam;Dr.A.Palpandi;Dr.A.Santha
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第2期
- Content analysis;
- Gate keeping;
- News selection;
- Man and Machine.;
14.Desalination Of Effluent Waste Using Biomass Heat Source And Analytical Validation Using RSM

机译：利用生物质热源对废水进行脱盐和使用RSM进行分析验证
- 作者：A.Senthil Rajan;K.Raja
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第2期
- Effluent;
- Primary treatment;
- Biomass boiler;
- solid;
- sensible heat storage materials;
- latent heat storage;
- Glass cools;
- multi basin still;
- stepped basin;
- water depths. Biomass;
- RSM.;
15.Multi Objective Optimization of Robotic GMAW Process Parameters using Genetic Algorithm

机译：基于遗传算法的机器人GMAW工艺参数多目标优化
- 作者：P.Thamilarasi;Dr.S.Ragunathan;E.Mohankumar
- 期刊名称：《International Journal of Fluid Engineering》 | 2015年第2期
- Bead Geometry;
- Multi Objective Optimization;
- GA;
16.Design And Analysis Of A Mobile Modular Fixture Robot Using Image Processing

机译：基于图像处理的移动式模块化夹具机器人的设计与分析
- 作者：Jinju Joseph;S.Prabhu
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第1期
- Mobile modular fixture;
- Image processing;
- Robot;
- MATLAB;
17.Hydraulic Investigations on a Flap Valve of Circular Cross Section

机译：圆形截面瓣阀的水力研究
- 作者：Mostafa A. Abu-Zeid
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第2期
- valve;
- hydraulic parameter;
- backflow;
- flow coefficient;
- stationary;
- transient;
18.Evaluation of Statistical Study of Droplet Fragmentation In CI Engine Under Lower Injection Velocity

机译：较低喷射速度下CI发动机油滴破碎统计研究的评估
- 作者：S.Senthilkumar;K.Purushothaman;N.Hariharan;S.Nakkeeran
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第1期
- Volume of Fluid;
- Droplet Liquid;
- Vibrational Fragmentation;
- Shear Fragmentation;
- Explosive Fragmentation;
19.Hydro magnetic Free Convective Flow and Mass Transfer through an Inclined Open Rectangular Channel with Hall Effects in the Presence of Temperature Dependent Heat Source.

机译：在依赖温度的热源存在下，通过具有霍尔效应的倾斜开放矩形通道的水磁自由对流和传质。
- 作者：V. Subba Reddy;M. Murali Mohan Naik;S. Sreedevi;S.V.K Varma
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第2期
- Mass transfer;
- Heat transfer;
- convection;
- porous;
- Hall Effect;
- Heat source effect;
20.Modelling and Design of SVPWM based DTC Induction Motor Drive

机译：基于SVPWM的DTC感应电动机驱动器的建模与设计
- 作者：P. Nagasekhar Reddy;J. Amarnath;P. Linga Reddy
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第2期
- Space Vector;
- Modulation;
- Harmonics;
- DTC;
- switching pattern;
- CSVPWM;
21.Effectiveness of Particle Swarm Optimization Algorithm For The Fixture Layout Optimization

机译：粒子群算法在夹具布局优化中的有效性
- 作者：Jeya Jeevahan
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第1期
- Effectiveness;
- Particle;
- Swarm;
22.Performance Studies on Solar Water Heater With Various Absorber Plate Geometries

机译：不同吸热板几何形状的太阳能热水器的性能研究
- 作者：J. Manikandan;B. Sivaraman
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第1期
- Performance;
- Studies;
- Solar;
23.Fuzzy Logic Model for Evaluating Leanness of Employee Behaviour Index in Lean Organization

机译：精益组织中员工行为指标精益度的模糊逻辑模型
- 作者：G.R.Kathiresan;P.V.Mohanram
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第1期
- Fuzzy;
- Logic;
- Model;
24.Adhesion Behavior of Polyurea Coating on Mild Steel

机译：聚脲涂层在低碳钢上的粘附行为
- 作者：Arunkumar.T;S.Ramachandran
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第1期
- Modified Polyurea;
- Adhesion;
- Scratch Test;
- Bond Test;
- Bend Test.;
25.Volumetric Visualization Algorithms for Medical Images - A Survey

机译：医学图像的体积可视化算法-调查
- 作者：S. Satheesh;K.V.S.V.R. Prasad;P. Vasuda
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第2期
- Medical Imaging;
- Volume Visualization;
- Isosurface;
- Surface Extraction;
- Direct Volume Rendering;
26.Data Centre Airflow Dynamics - Need for a Qualitative Air Flow Management System for Data Centres

机译：数据中心气流动力学-需要针对数据中心的定性气流管理系统
- 作者：R.Premnath;G. Madhu
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第2期
- Data Centre;
- Raised floor;
- Cooling;
- Vent tiles;
- Air flow;
- Energy;
27.Flow Analysis in Traditional and Hooped Peiton Runner Bucket

机译：传统和箍式Peiton转轮的水流分析
- 作者：Gaurangkumar C. Chaudhari;Samip P. Shah;S.A. Channiwala
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第2期
- Traditional Pelton Runner;
- Hooped Pelton Runner;
- flow simulation;
28.Formidable Challenge of Water Needs for Tomorrow Ensure by Artificially Recharge Soil Aquifer

机译：人工补给含水层确保明日用水的巨大挑战
- 作者：Pratima Patel;M.D. Desai;J.A. Desai
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第2期
29.Oscillatory Flow of Dusty Visco-Elastic Maxwell Fluid Between Two Parallel Plates

机译：尘埃粘弹性麦克斯韦流体在两个平行板之间的振荡流动
- 作者：Achala. L. Nargund;P.S. Hiremath
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第2期
- Dusty flow;
- Oscillatory flow;
- visco-elastic fluid;
- permeable wall;
- dusty fluid;
- Maxwell fluid;
- Slip conditions;
30.Effect of Turbulence Model In Computational Analysis of Active Flow Control on Aerodynamic Drag of Bluff Body Van Model

机译：湍流模型在主动流控制计算分析中对钝体范模型气动阻力的影响
- 作者：Rustan Tarakka;Jalaluddin;Baharuddin Mire;Muhammad Noor Umar
- 期刊名称：《International Journal of Fluid Engineering》 | 2016年第1期
- active flow control;
- aerodynamic drag;
- the bluff body van model;
- turbulence model;
31.Aerodynamic Study of Blended Wing Body

机译：混纺机翼体的空气动力学研究
- 作者：Irene Moulitsas
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第1期
- Blended Wing Body (BWB);
- Lift to Drag (L/D) Ratio;
- Payload;
- Fuselage;
- Aerodynamic Study.;
32.Power Performance Characteristics Investigation of Gas Engine using New Injector

机译：采用新注射器的燃气发动机功率性能特征研究
- 作者：Yiwen Zhang
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第1期
- Gas engine;
- diameter holes injector;
- engine conversion;
- new injector;
- power performance;
33.Wavelet Estimation of THD Based on Hilbert Transform Extraction

机译：基于Hilbert变换提取的THD小波估计
- 作者：Zhao Du;Haojin Zhu;Hui Li
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第2期
- Total Harmonic Distortion;
- Analog to Digital Converters;
- Hilbert Transform;
- Wavelet Transform;
34.Performance and Emission Characteristics of a Diesel Engine Using Nano Particle as Additive with Biodiesel

机译：使用纳米粒子作为生物柴油添加剂的柴油发动机的性能和排放特性
- 作者：Yunqi Guo
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第1期
- Diesel engine;
- nano particles;
- biodiesel;
- performance;
- emissions;
- titanium oxide.;
35.Identification of Underground River Flow in Karst Area Using Geoelectric and Self-Potential Methods in Druju Region, Southern Malang, Indonesia

机译：在印度尼西亚南部莫朗地区利用地电和自潜能方法识别岩溶地区的地下河流流动
- 作者：Yintang Yang
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第2期
- Karst;
- Underground River;
- Resistivity;
- Self-Potential;
36.Numerical Investigation of Wind Driven Natural Ventilation in a Mega Warehouse Building

机译：巨型仓库建设中风驱动自然通风的数值调查
- 作者：Shrinivas Hulsure;R.S.Maurya
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第1期
37.Optimisation of machining parameters in drilling of HFRP composites by desirability function analysis embedded with Response surface method

机译：响应曲面法嵌入函数函数分析，优化HFRP复合材料钻孔的加工参数
- 作者：Chan-Hung Lee;Ebrahim Baktash
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第2期
- desirability function analysis;
- DFA;
- GFRP composites;
- PVD Coated tungsten carbide drill bit;
- ANOVA;
38.Optimization of Process Parameters of Stir Casting To Maximize The Hardness of Al-Sic Composites By Taguchi Method

机译：搅拌铸造工艺参数的优化，以最大化塔卢奇法的铝合金复合材料的硬度
- 作者：Daniele Cesini
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第1期
- Al-SiC composites;
- stir-casting;
- hardness;
- Taguchi method;
39.Effect of Joint Configuration on the Mechanical Properties of Friction Stir Welded Aluminium Copper Joints

机译：联合结构对摩擦搅拌焊接铝铜接缝机械性能的影响
- 作者：Zhijun Fang;Anuj Sharma
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第1期
- Friction stir welding;
- Microstructure;
- Tensile properties;
- Hardness;
40.Design and Manufacturing of a holding fixture to test the tensile strength of a flat specimen

机译：保持夹具的设计和制造，以测试平面样本的拉伸强度
- 作者：Chi-Heng Lin;Xiaodong Wang;Mahmood Karimi;Alkinoos Athanasiou
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第2期
- CATIA;
- DFM;
- DFA;
- DFT;
- Tolerance;
- ASTM;
- UTM;
- Milling Machine;
- Shaper Machine;
- Lathe Machine;
- Drill Machine;
- Grinding Machine;
41.Mitigation Of Nox Emission From Mango Seed Methyl Ester Fuelled Di Diesel Engine Using Antioxidant Additive

机译：使用抗氧化添加剂减轻芒果种子甲酯燃料DI柴油发动机的NOx排放
- 作者：Elena Corni
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第1期
- Biodiesel;
- mango seed oil;
- antioxidants;
- L-ascorbic acid;
- fuel additives;
- engine emissions;
42.An Experimental Investigation of Dry Sliding Wear Behaviour on Phosphor Bronze/WS2 Particle Reinforced Composites

机译：磷青铜/ WS2颗粒增强复合材料干滑动磨损行为的实验研究
- 作者：Jiaxun Tang
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第1期
- Metal Matrix Composites;
- Stir casting;
- Sliding wear;
- Scanning Electron Microscope;
43.Studies and Analysis of Effect of Foreign Particles on the Parts of Steam Turbine

机译：外来粒子对汽轮机零件影响的研究与分析
- 作者：Yang Song;Bin Wang;Mhd Nour Hindia
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第2期
- babbitt metal;
- corrosion;
- clearance;
44.A Robust Image Watermarking Technique using DTCWT and PCA

机译：使用DTCWT和PCA的鲁棒图像水印技术
- 作者：Yuan Ping;Baocang Wang
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第2期
- DTCWT;
- PCA;
- 2D signal spectrum;
- 2D DWT;
- Digital Watermarking;
45.Traffic Scheduling Algorithm for Wireless Networks Using QoS Provisioning Framework

机译：使用QoS供应框架的无线网络流量调度算法
- 作者：Baocang Wang;Yuehua Yang
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第2期
- Link scheduling;
- Wireless Mesh Networks;
- Quality of Service (QoS);
46.A Review on Renewable Energy Sources: Investigation on the Treatment and Up-gradation of Biogas

机译：可再生能源综述：对沼气治疗及上升级的调查
- 作者：Iraj Sadegh Amiri;Kang-Chun Peng
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第2期
- Biogas;
- renewable energy;
- treatment;
- adsorption;
47.Space-Vector-Modulation Scheme with Distance Mapping for Multilevel Inverters

机译：具有距离映射的空间矢量调制方案对多级逆变器的距离映射
- 作者：Xinghua Li
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第2期
48.A Study of Dufour and Soret Effect on MHD Mixed Convection Stagnation Point Flow towards a Vertical Plate in a Porous Medium

机译：对多孔介质垂直板朝向垂直板的MHD混合对流停滞点流动的研究
- 作者：Anuradha S;Harianand N.
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- parameter;
- reaction;
- Concentration;
49.Arctic Drilling Fluid Formulation And Characrtization

机译：北极钻井液配方和表征
- 作者：Simen Moe Str?m?;Mesfin Belayneh
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- rheology;
- formulation;
- reaction;
50.Optimization of Process Parameters of Stir Casting To Maximize The Hardness of Al-Sic Composites By Taguchi Method

机译：搅拌铸造工艺参数的优化，以最大化塔卢奇法的铝合金复合材料的硬度
- 作者：Elcin Ceren Yaldir
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- Al-SiC composites;
- stir-casting;
- hardness;
- Taguchi method;
51.Mitigation Of Nox Emission From Mango Seéd Methyl Ester Fuelled Di Diesel Engine Using Antioxidant Additive

机译：使用抗氧化添加剂减轻芒果Seéd甲酯燃料DI柴油发动机的减少
- 作者：Xiao Chai
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- Biodiesel;
- mango seed oil;
- antioxidants;
- L-ascorbic acid;
- fuel additives;
- engine emissions;
52.Effect of Joint Configuration on the Mechanical Properties of Friction Stir Welded Aluminium Copper Joints

机译：联合结构对摩擦搅拌焊接铝铜接缝机械性能的影响
- 作者：Hong Nie;Selin Aradag
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- Friction stir welding;
- Microstructure;
- Tensile properties;
- Hardness;
53.Dynamic Viscoelasticity And Dynamic Sagging Correlation Of Four Oil Based Drilling Fluids (OBM)

机译：四种油井钻井液（OBM）的动态粘弹性和动态下垂相关性
- 作者：Thomas Sharman;Mesfin Belayneh
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- increases;
- dissipation;
- performance;
54.Aerodynamic Study of Blended Wing Body

机译：混纺机翼体的空气动力学研究
- 作者：Kubra Asena Gelisli
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- Blended Wing Body (BWB);
- Lift to Drag (L/D) Ratio;
- Payload;
- Fuselage;
- Aerodynamic Study.;
55.Optimization of Melting Process In Casting Industry Using GA and Reduction of Lead Time Using VSM

机译：使用GSM使用GA的铸造工业熔炼过程的优化，并使用VSM减少延长时间
- 作者：Xiongqing Yu;Yu Wang
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- lead time;
- value stream mapping;
- production process;
- melting;
- and furnace optimization;
56.An Experimental Investigation of Dry Sliding Wear Behaviour on Phosphor Bronze/WS_2 Particle Reinforced Composites

机译：磷青铜/ WS_2颗粒增强复合材料干滑动磨损行为的实验研究
- 作者：Ran Xu
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- Metal Matrix Composites;
- Stir casting;
- Sliding wear;
- Scanning Electron Microscope;
57.Application of Neat Cashew Nut Shell Oil in Compression Ignition Engine

机译：纯净腰果壳油在压缩点火发动机中的应用
- 作者：Pengcheng Nie
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第2期
- characteristics;
- consumption;
- parameters;
58.Dependence of Archwire on Different Orthodontic Brackets; Numerical Study on Stress Distributions and Deformations

机译：archwire在不同的正畸括号上的依赖性; 压力分布与变形的数值研究
- 作者：Yong He
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第2期
- Braces;
- Bracket;
- Wire;
- Finite Element Analysis;
- Stress;
- Deformation.;
59.Cost Effective Solution for Energy Efficiency in Urban Water Supplies: Developing Countries

机译：城市供水中能源效率的成本效益解决方案：发展中国家
- 作者：Jae B. Park
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第2期
- energy;
- consumption;
- production;
60.Punching Process Characteristics of ECV Materials

机译：ECV材料的冲压工艺特征
- 作者：Yaqun He
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第2期
- Electromagnetic control valve (ECV);
- Solenoid;
- Materials;
- Compressor;
61.Condition Monitoring and Diagnostic Analysis of Induced Draught Fan Rotor System

机译：诱导风扇转子系统的状态监测与诊断分析
- 作者：Shuai Wang
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第2期
- Vibrational velocity;
- Trend monitoring;
62.Prediction of Compressive Strength of GGBS Concrete using Neural Network

机译：使用神经网络预测GGBS混凝土的抗压强度
- 作者：Yaqun He
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第2期
- Ground Granulated Blast Furnace Slag;
- Cement;
- Compressive Strength;
- Concrete;
- Neural Network;
63.Influence of Engine Parameters Optimization in the Neat Non-Edible Oil + LSD Fuel Combustion Analysis: Measurement of Cylinder Pressure and Heat Release at Various Loads

机译：发动机参数优化在整齐的非食用油+ LSD燃料燃烧分析中的影响：气缸压力和各种负载热释放的测量
- 作者：Hua Wei
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第2期
- Combustion Analysis;
- Cylinder Peak Pressure;
- Heat Release;
- ANOVA;
- and non linear regression equation;
64.Performance Investigation of Vapour Compression Refrigeration System using Nano GasTi02 with R134a

机译：用R134A使用纳米GASTI02蒸气压缩制冷系统的性能调查
- 作者：Weining Xie
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第2期
- R134a refrigerant;
- TiO_2 gas;
- Co efficient of Performance;
- cooling load calculations;
65.Model-Based Training of a Gearbox Condition Monitoring System

机译：基于模型的变速箱状态监测系统培训
- 作者：Qiang He
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第1期
- Rolling mill;
- Condition monitoring;
- Bearing;
- Gearbox;
66.Design & Development of an Extruder Unit, Generatedthrough Modelling Its Parts, Assembled and Simulated For Use in 3DCP

机译：挤出机单元的设计与开发，模拟其部件，组装和模拟用于3DCP的零件
- 作者：Moubachir Madani Fadoul;Tharek Abdul Rahman
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第2期
- design;
- Extruder cum dispenser;
- 3D printer;
67.Numerical Investigation of Drag and Lift Coefficient on a Fixed Tilt Ground Mounted Photovoltaic Module System over Inclined Terrain

机译：在倾斜地形上固定倾斜接地光伏模块系统拖曳系数的数值研究
- 作者：Imran Ismail Sheikh
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第2期
- Wind loading;
- Photovoltaic panels;
- CFD;
68.Effect of condenser water flow rate on COP of Vapour Compression Refrigeration System

机译：冷凝器水流速对蒸汽压缩制冷系统COP的影响
- 作者：Kim-Kwang Raymond Choo;Song Li;Jie Cui;Hong Zhong
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第1期
- Condenser water flow rate;
- COP;
- Vapour Compression Refrigeration;
- R-134a;
69.A Highly Resilient Network on Chip Router for Core Based SoC

机译：基于核心SOC的芯片路由器上的高度弹性网络
- 作者：Erwen Zhang
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第1期
- Network on chip;
- system on chip;
- router;
- FPGA;
- VHDL;
70.Designing and Characterization of a High Reynolds Number Stratified Chilled Water Thermal Storage Tank with Perforated Damper

机译：具有多孔阻尼器的高雷诺数分层蓄热水热储罐的设计与表征
- 作者：Vidya Motkar
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第1期
- Thermal storage system;
- Stratification;
- Charge- discharge cycle;
- Thermocline thickness;
- Perforated plates;
71.Microcontroller Code Protection Technique based on Simulated-Hot-spot Analysis of Instruction Access Pattern

机译：基于仿真访问模式的模拟 - 热点分析的微控制器码保护技术
- 作者：Panfei Song
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第2期
- Protection;
- Analysis;
- memory;
72.Shading Phenomenon Analysis for a Medium Size 3.8 kW Standalone PV System Connected in Series Parallel Configuration Using MATLAB Simulation

机译：使用MATLAB仿真串联平行配置连接的中等尺寸3.8 kW独立PV系统的阴影现象分析
- 作者：Chao Yang
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第2期
- Photovoltaic (PV) module;
- Maximum Power Point Tracking (MPPT);
- partial shading;
- Pamp;
- O (perturbation and observation);
73.Performance of Boron Carbide Coated Tool Using Spray Pyrolysis for Turning AISI316L

机译：硼碳化物涂层工具的性能使用喷雾热解旋转AISI316L
- 作者：Chaoqun Xu
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第1期
- AISI316L;
- CNC TURNING;
- BORON CARBIDE;
- DFA;
- ANOVA.;
74.Effect of Die and Punch Geometry on Spring Back in Air Bending of Electrogalvanized CR4 Steel

机译：模具和冲压几何形状在电镀锌CR4钢空气弯曲中的弹簧回
- 作者：Chenyu Wang;Guoai Xu
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第1期
- Spring back;
- CR4 steel;
- electro-galvanizing;
- die and punch;
- geometry;
- sheet metal forming;
- air bending;
75.Effect of Heat Conduction on Friction Pad Life in Disk Braking System

机译：热传导对磁盘制动系统摩擦垫寿命的影响
- 作者：George Arfaras;Niki Pandria
- 期刊名称：《International Journal of Fluid Engineering》 | 2019年第2期
- Disk;
- Pads;
- Brakes;
- life;
76.Optimization of Melting Process In Casting Industry Using GA and Reduction of Lead Time Using VSM

机译：使用GSM使用GA的铸造工业熔炼过程的优化，并使用VSM减少延长时间
- 作者：Antonio Falabella;Andrea Ferraro
- 期刊名称：《International Journal of Fluid Engineering》 | 2018年第1期
- lead time;
- value stream mapping;
- production process;
- melting;
- and furnace optimization;
77.Experimental study of energy harvester by considering fatigue property of PZT-5H disc

机译：考虑PZT-5H光盘疲劳性能的能源收割机的实验研究
- 作者：Jiguo Li
- 期刊名称：《International Journal of Fluid Engineering》 | 2020年第1期
- PZT;
- eco-friendly;
- next-generation;
78.Arctic Drilling Fluid Formulation And Characrtization

机译：北极钻井液配方和表征
- 作者：Simen Moe Str?m?;Mesfin Belayneh
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- rheology;
- formulation;
- reaction;
79.Optimization of Melting Process In Casting Industry Using GA and Reduction of Lead Time Using VSM

机译：使用GSM使用GA的铸造工业熔炼过程的优化，并使用VSM减少延长时间
- 作者：Xiongqing Yu;Yu Wang
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- lead time;
- value stream mapping;
- production process;
- melting;
- and furnace optimization;
80.Experimental and Numerical Investigation of the Three-dimensional Flow at Expiration in the Upper Human Airways

机译：上部气道到期三维流动的实验性和数值研究
- 作者：Yuh-Min Tseng
- 期刊名称：《International Journal of Fluid Engineering》 | 2020年第1期
- multiplane stereo PIV;
- LBM;
- steady exhalation;
- vortical structures;
81.Optimization of Process Parameters of Stir Casting To Maximize The Hardness of Al-Sic Composites By Taguchi Method

机译：搅拌铸造工艺参数的优化，以最大化塔卢奇法的铝合金复合材料的硬度
- 作者：Elcin Ceren Yaldir
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- Al-SiC composites;
- stir-casting;
- hardness;
- Taguchi method;
82.Prediction of Compressive Strength of GGBS Concrete using Neural Network

机译：使用神经网络预测GGBS混凝土的抗压强度
- 作者：Yaqun He
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第2期
- Ground Granulated Blast Furnace Slag;
- Cement;
- Compressive Strength;
- Concrete;
- Neural Network;
83.Mitigation Of Nox Emission From Mango Seéd Methyl Ester Fuelled Di Diesel Engine Using Antioxidant Additive

机译：使用抗氧化添加剂减轻芒果Seéd甲酯燃料DI柴油发动机的减少
- 作者：Xiao Chai
- 期刊名称：《International Journal of Fluid Engineering》 | 2017年第1期
- Biodiesel;
- mango seed oil;
- antioxidants;
- L-ascorbic acid;
- fuel additives;
- engine emissions;
84.Variable Viscosity and Thermal Conductivity on Mhd Flow Over a Stretching Surface with Power Low Velocity

机译：MHD流动的可变粘度和导热率，延伸表面具有功率低速的拉伸表面
- 作者：Ying-Hao Hung
- 期刊名称：《International Journal of Fluid Engineering》 | 2020年第1期
- Stretching surface;
- Skin friction;
- power low velocity;
- shooting method;
- variable viscosity and thermal conductivity;
85.Microstructural Characterization and Some Mechanical Behaviour of Low Manganese Austempered Ferritic Ductile Iron

机译：低锰奥斯特型铁素体延性铁的微观结构特征及一些力学行为
- 作者：Fengjie Sha
- 期刊名称：《International Journal of Fluid Engineering》 | 2020年第1期
- Ausferrite;
- Spherodial-Graphite;
- Acicular phase;
86.Chemical Reaction on a Transient MHD Flow Past an Impulsively Started Vertical Plate with Ramped Temperature and Concentration with Viscous Dissipation

机译：在瞬态MHD流中的化学反应过去，脉冲开始垂直板，温度升高，浓度粘性耗散
- 作者：Sen-Shan Huang
- 期刊名称：《International Journal of Fluid Engineering》 | 2020年第1期
- MHD;
- thermal diffusion;
- thermal radiation;
- ramped temperature;
- chemical reaction;
- viscous dissipation;
87.Computational and Experimental Study of Articular Cartilage Thickness on Biomechanical Behavior

机译：关节软骨厚度对生物力学行为的计算与实验研究
- 作者：Yichen Zhang;Xinyi Huang
- 期刊名称：《International Journal of Fluid Engineering》 | 2020年第1期
- Articular cartilage;
- thickness;
- biomechanical properties;
- finite element;
88.Proximity Measures in Clustering on Patient Diagnosis System

机译：Proximity Measures in Clustering on Patient Diagnosis System
- 作者：S. Meganathan;M. Poornima;A. Sumathi
- 期刊名称：《International Journal of Fluid Engineering》 | 2021年第1期
- Clustering;
- Binary Similarity;
- PMS;
89.Performance, Emission and Combustion Characteristics of A Diesel Engine Using Grape Seed Oil Methyl Ester-Based Fuels

机译：Performance, Emission and Combustion Characteristics of A Diesel Engine Using Grape Seed Oil Methyl Ester-Based Fuels
- 作者：Ahmad Awada;Ingo Viering
- 期刊名称：《International Journal of Fluid Engineering》 | 2022年第2期
- Grape seed oil Methyl ester;
- EGR;
- Diesel engine performance;
- Exhaust emissions;
- Combustion characteristic;
90.A Comparative Study on Exhaust Emissions from High Grade Low Heat Rejection Diesel Engine with Crude Jatropha Oil

机译：A Comparative Study on Exhaust Emissions from High Grade Low Heat Rejection Diesel Engine with Crude Jatropha Oil
- 作者：Lanhua Xiang;Hongbin Chen;Feng Zhao
- 期刊名称：《International Journal of Fluid Engineering》 | 2022年第1期
- Crude-Jatropha;
- non-edible;
- shows a;
91.Investigation on the Application of Kalman Filterfor Heat Exchanger Process

机译：Investigation on the Application of Kalman Filterfor Heat Exchanger Process
- 作者：S. Muthumari;V.M. Haran;S. Rakesh KumarS. Venkatesh
- 期刊名称：《International Journal of Fluid Engineering》 | 2021年第1期
- Heat Exchanger;
- Kalman Filter;
- Estimation;
92.Experimental Study of Micro Industry of Animal and Human Powered Mechanical Device for Battery Charging

机译：Experimental Study of Micro Industry of Animal and Human Powered Mechanical Device for Battery Charging
- 作者：S.K. Chandrakar;D.K. Yadav;Jayant SinghDurgesh Kumar VermaAkram Khan
- 期刊名称：《International Journal of Fluid Engineering》 | 2021年第1期
- Animal power;
- human power;
- speed increaser;
- electric generation;
93.Optimizing The Operating Parameters In Waste Heat Recovery System

机译：Optimizing The Operating Parameters In Waste Heat Recovery System
- 作者：Yaohua Wang;Zhao Lv;Shuming Chen
- 期刊名称：《International Journal of Fluid Engineering》 | 2022年第2期
- HVAC;
- heat pipe;
- waste heat recovery;
- nanofluids;
94.Aerodynamic Analysis of Wind Turbine Blade Aerofoils

机译：Aerodynamic Analysis of Wind Turbine Blade Aerofoils
- 作者：Zhigang Li;Shining Li
- 期刊名称：《International Journal of Fluid Engineering》 | 2022年第1期
- Wind Turbine;
- airfoil;
- Lift coefficient and Drag coefficient;
95.Eliminating the Hazardous Elements from E-Waste by Electrolysis

机译：Eliminating the Hazardous Elements from E-Waste by Electrolysis
- 作者：Iván García-Magari?o
- 期刊名称：《International Journal of Fluid Engineering》 | 2020年第2期
96.Analysis Of Compositions Of Ceramsite Ash-Slag-Concrete For Monolithic Building Construction

机译：Analysis Of Compositions Of Ceramsite Ash-Slag-Concrete For Monolithic Building Construction
- 作者：A. V. Uglyanitsa;N. V. Gilyazidinova;N. Y. RudkovskayaT. N. Santalova
- 期刊名称：《International Journal of Fluid Engineering》 | 2021年第2期
- Ceramsite;
- ash-slag mixture;
- ceramsite ash-slag concrete;
- monolithic building construction;
- frost resistance;
- strength;
97.A Double Carbon Synthesis for Si-Ti Composite Anode Materials for Li-ion Batteries

机译：A Double Carbon Synthesis for Si-Ti Composite Anode Materials for Li-ion Batteries
- 作者：Ivan García-Magari?o
- 期刊名称：《International Journal of Fluid Engineering》 | 2020年第2期
- Li-ion battery;
- Anode;
- Silicide;
- Composite;
- Carbon coating;
98.Optimal Synthesis of Planar Eight-Bar Mechanism for Function Generation: A Variable Topology Approach

机译：Optimal Synthesis of Planar Eight-Bar Mechanism for Function Generation: A Variable Topology Approach
- 作者：Xin Wei
- 期刊名称：《International Journal of Fluid Engineering》 | 2022年第1期
- Synthesis;
- Eight bar mechanism;
- Variable topology;
- Freudenstein's equation;
99.Optimization of Process parameters in Sleeve Synchronizer Groove turning (Hard turning) for better surface finish and Productivity using TGRA A Practical Investigation

机译：Optimization of Process parameters in Sleeve Synchronizer Groove turning (Hard turning) for better surface finish and Productivity using TGRA A Practical Investigation
- 作者：S.Rajarasalnath;K.Balasubramanian;N.Rajeswari
- 期刊名称：《International Journal of Fluid Engineering》 | 2021年第2期
- industry;
- rapid;
- decade;
100.An Active Steganographic Scheme Using SSB

机译：An Active Steganographic Scheme Using SSB
- 作者：R.Sarathkumar;V.Kalpana
- 期刊名称：《International Journal of Fluid Engineering》 | 2021年第1期
- least significant bit (SLSB);
- embedding ratio;
- payload;
- visual tone;
- compression;
- inpainting;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号