首页>外文期刊>数学、物理、化学、力学>数学>International Journal of Computational Engineering Science(IJCES)

International Journal of Computational Engineering Science(IJCES)

中文名称：计算工程的国际期刊科学(IJCES)

ISSN：1465-8763
出版周期：Quarterly

发文量：211

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.CHARACTERISATION OF ELECTROPLATED EUTECTIC Sn-Ag SOLDER

机译：电镀共晶Sn-Ag焊料的表征
- 作者：Z. W. ZHONG;K. C. CHAN;Y. H. CHEN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Sn-Ag;
- Bump composition;
- Surface morphology;
- Shear strength;
2.NEW DEVELOPMENT TO EXTEND THE TOOL LIFE OF CERAMIC BONDING TOOLS

机译：延长陶瓷粘接工具使用寿命的新发展
- 作者：Z. W. ZHONG;K. S. GOH
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Ceramic bonding tool;
- Tool life;
- Gold wire;
- Cost;
- Wire bonding;
3.DESIGN OF A NOVEL MICROWAVE MEMS TUNABLE FILTER

机译：新型微波MEMS可调滤波器的设计。
- 作者：A. B. YU;Q. X. ZHANG;A. Q. LIU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- RF MEMS;
- BPF;
- Tunable Capacitor;
- CPW;
4.LAB-ON-A-CHIP SYSTEMS FOR BIOMEDICAL AND ENVIRONMENTAL MONITORING

机译：用于生物医学和环境监测的芯片实验室系统
- 作者：J. G. E. GARDENIERS;A. VAN DEN BERG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Lab-on-a-Chip;
- Ion analysis;
- Hydrodynamic chromatography;
- Micromachining;
5.PREVENT NOTCHING FOR SOI MICROSTRUCTURE FABRICATION USING SiO{sub}2 THIN FILM TECHNIQUE

机译：使用SiO {sub} 2薄膜技术防止SOI微结构化的刻痕
- 作者：J. LI;Q. X. ZHANG;A. Q. LIU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Microstructure fabrication;
- Notching effect;
- Oxide thin film;
- SOI deep etching;
- MEMS;
6.A FABRICATION METHOD TO FORM GLASS CAPILLARY

机译：一种形成玻璃毛细管的方法
- 作者：Y. CHEN;S. JANAK;S. UPPILI
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Glass capillary;
- Glass micromachine;
- Glass channel;
- Anodic bonding;
- Microfluidic devices;
7.FABRICATION OF AMORPHOUS CARBON MICRO-MEMBRANES BY DEEP REACTIVE ION ETCHING TECHNIQUE

机译：深反应离子刻蚀技术制备非晶碳微膜
- 作者：YU LIUJIANG;B. K. TAY;D. SHEEJA;Y. Q. FU;J. M. MIAO
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- a-C films;
- Substrate bias;
- MEMS;
- Micro-membranes;
8.FLIP-CHIP PACKAGED MICRO-PLATE FOR LOW COST THERMAL MULTIPLEXING

机译：倒装芯片封装微板，可实现低成本的热复式
- 作者：YUBO MIAO;CHONG SER CHONG;TAICHONG CHAI;YU CHEN;QUANBO ZOU;TIE VAN;CHEW KIAT HENG;TIT MENG LIM
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Flip-chip bonding;
- Micro-plate array;
- Thermal multiplexing;
- uPCR;
9.EVALUATION OF RESONATING CHANNEL TRANSISTOR IN SOI WAFER

机译：SOI晶圆中谐振通道晶体管的评估
- 作者：S. MYLLYMAKI;E. RISTOLAINEN;P. HEINO;A. LEHTO;K. VARJONEN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- SOI;
- Transistor;
- Resonator;
- Oscillator;
- MEMS;
10.INVESTIGATION OF LOADING EFFECT IN DEEP TRENCH LISA TECHNOLOGY

机译：深沟丽萨技术中的载荷效应研究
- 作者：Q. X. ZHANG;Q. Y. GUO;J. LI;A. Q. LIU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Loading effect;
- RIE-lag;
- Micro loading;
- Macro loading;
- Deep trench etch;
11.STRUCTURAL AND MAGNETIC PROPERTY OF AGED Ni{sub}2MnAl HEUSLER ALLOYS

机译：老化的Ni {sub} 2MnAl Heusler合金的结构和磁性能
- 作者：VIJAY K. SRIVASTAVA;RATNAMALA CHATTERJEE;T. C. GOEL
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Heusler alloy;
- Shape memory effect;
- (L2){sub}1 phase;
- Ageing condition;
12.STATIC AND DYNAMIC CHARACTERIZATION OF MEMS VIA ESPI

机译：通过ESPI对MEMS进行静态和动态表征
- 作者：Andreas H. Foitzik;Wolfgang Kaese;Thomas Vogt;Michael Sommerer;Serguei Arkhipov
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- MEMS;
- ESPI - Electronic Speckle Pattern Interferometry;
- Goeppingen Procedure;
13.A NOVEL LUMPED TWO DEGREES OF FREEDOM PULL-IN APPROACH TO ELECTROSTATIC TORSIONAL MICROMIRRORS

机译：静电扭转微镜的新式两度自由拉入方法
- 作者：J. -M. HUANG;A. Q. LIU;X. M. ZHANG;J. AHN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Torsional micromirror;
- Pull-in effect;
- Optical MEMS;
- MOEMS;
14.FINITE ELEMENT ANALYSIS OF NON-LINEAR FLUID STRUCTURE INTERACTION IN HYDRODYNAMICS USING MIXED LAGRANGIAN-EULERIAN METHOD

机译：混合拉格朗日-欧拉方法在流体动力学非线性流固耦合有限元分析中的应用
- 作者：N. M. SUDHARSAN;K. MURALI;KURICHI KUMAR
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2004年第2期
15.Broadband echoes from underwater targets

机译：水下目标的宽带回波
- 作者：HENRY LEW
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2004年第2期
- Scattering;
- Underwater Acoustics;
- Broadband;
- Active Sonar;
16.PARALLEL FAST MULTIPOLE METHOD FOR LARGE-SCALE COMPUTATION OF ELECTROMAGNETIC SCATTERING

机译：电磁散射大规模计算的并行快速多极方法
- 作者：YAO JIANG ZHANG;FANG WU;ERPING LI
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2004年第2期
- Fast Multipole Method;
- Parallel Computing;
- Scattering;
- Radar Cross Section;
17.LATTICE BOLTZMANN METHOD ON NONUNEFORM MESH

机译：格状网格的格子Boltzmann方法
- 作者：M. CHENG;K. C. HUNG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2004年第2期
- Lattice Boltzmann method;
- Nonuniform mesh;
- Lagrange interpolation;
- Fluid flow simulation;
18.EVOLUTIONARY PROGRAMMING BASED ECONOMIC DISPATCH WITH LINE FLOW CONSTRAINTS

机译：基于进化规划的带线约束的经济调度
- 作者：P. SOMASUNDARAM;K. KUPPUSAMY;R. P. KUMUDINI DEVI
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2004年第1期
- Power System Optimization;
- Economic Dispatch;
- Evolutionary Programming;
- Line Flow Constraints;
19.EXTREMELY SHARP {111}-BOUND, SINGLE-CRYSTALLINE SILICON NANO TIPS

机译：极度清晰的{111}键合，单晶硅纳米提示
- 作者：JAEHONG PARK;KIDONG PARK;SEUNGJOON PAIK;KYO-IN KOO;BYOUNG-DOO CHOI;JONGPAL KIM;SANGJUN PARK;IL-WOO JUNG;HYOUNGHO KO;DONG-IL (DAN) CHO
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- (111) nano tip;
- (111) silicon probe;
- High aspect ratio tip;
20.TUNABLE MICROELECTROMECHANICAL CAPACITOR WITH WIDE TUNING RANGES

机译：具有可调范围的可调式微机电电容器
- 作者：J. -M. HUANG;A. Q. LIU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Microelectromechanical system (MEMS);
- Tunable capacitor;
- Tuning characteristic;
- RF performance;
- Interdigital comb;
21.MEASURING SEVEN PARAMETERS BY TWO ISFET-MODULES IN A MICROCELL SET-UP

机译：在微电池设置中通过两个ISFET模块测量七个参数
- 作者：MICHAEL J. SCHONING;ARSHAK POGHOSSIAN;JOACHIM W. SCHULTZE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- ISFET;
- Multi-parameter detection;
- Identical transducer principle;
- (Bio-)chemical sensor;
- Physical sensor;
22.EFFECT OF ASPECT RATIO OF UNSTEADY THERMAL-FLUID TRANSPORT PHENOMENA IN CAVITIES UNDER REDUCED GRAVITY

机译：重力作用下空洞中非定常热-流体传输现象的长宽比效应
- 作者：SHUICHI TORII
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第1期
- Unsteady natural convection;
- Cavity;
- Reduced gravity;
- Marangoni convection;
- Aspect ratio;
23.ON ANGULAR SPEED LOSS ANALYSIS OF FLAT BELT TRANSMISSION SYSTEM BY FINITE ELEMENT METHOD

机译：平带传输系统角速度损失的有限元分析
- 作者：WEN-HWA CHEN;CHYUAN-JAU SHIEH
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第1期
- Angular speed loss;
- Flat belt;
- Transmission system;
- Frictional contact analysis;
24.THE GOEPPINGEN GENEREACTOR FOR DNA-ANALYSIS

机译：用于基因分析的GOEPPINGEN遗传反应器
- 作者：MECHTILDE SCHAFER;MATTHIAS WALZ;REINER STEIN;LARS VOLLMER;GUNTHER SCHUSTER;ANDREAS H. FOITZIK
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- PCR - Polymerase Chain Reaction;
- MEMS;
- Microfluidic;
- DNA-Analysis;
25.DESIGN FOR BOARD LEVEL RELIABILITY OF A MINIATURIZED MEMS PACKAGE: STACKED DIE TQFN

机译：微型化MEMS封装的板级可靠性设计：叠层模具TQFN
- 作者：TONG Y. TEE;GIOVANNI FREZZA;MAYHUAN LIM;HUN S. NG;FEDERICO ZIGLIOLI;ZHAOWEI ZHONG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- QFN;
- Stacked Die;
- Accelerometer;
- Solder Joint Reliability;
26.AN ACCURATE SCHEME FOR GAS DYNAMICAL CALCULATIONS

机译：气体动力学计算的精确方案
- 作者：MAHMOOD K. MAWLOOD;WAQAR ASRAR;ASHRAF A. OMAR;MEGAT M. H. M. AHMAD
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第4期
- High-Order Compact Schemes;
- Total Variation Diminishing;
- Euler Equations. Runge-Kutta Methods;
27.MECHANICAL BEHAVIOR OF NANO SCALE THIN FILMS USING MEMS SENSORS

机译：使用MEMS传感器的纳米尺度薄膜的机械行为
- 作者：TAHER SAIF;AMAN HAQUE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- MEMS;
- Nanograin;
- Aluminum;
- Non-linear elastic;
28.EFFECTS OF WAFER BONDING AND THINNING PROCESSES ON ELECTRICAL PERFORMANCE OF MOS DEVICES

机译：晶圆键合和稀化工艺对MOS器件电性能的影响
- 作者：WENJIANG ZENG;HUAMAO LIN;XIAOLIN ZHANG;RAMASAMY CHOCKALINGAM;WEE CHONG HENG;SANGKI HONG;NARAYANAN BALASUBRAMANIAN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Wafer scale integration;
- MOS devices;
- Bonding;
- Thinning;
- Stacks;
29.DESIGN AND MODELING OF THERMALLY ACTUATED MICROMIRROR FOR FINE-TRACKING MECHANISM OF HIGH-DENSITY OPTICAL DATA STORAGE

机译：高密度光学数据存储精细跟踪机制的热驱动微镜设计与建模
- 作者：DENG XIAOCHONG;YANG JIAPING;CHONG TOW CHONG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Thermal actuator;
- Micromirror;
- Optical data storage;
30.VOLTAGE CONTROLLED OSCILLATOR USING TUNABLE MEMS RESONATOR

机译：使用可调谐MEMS谐振器的电压控制振荡器
- 作者：SHASHIDHAR PATI;C. VENKATESH;NAVAKANTA BHAT;RUDRA PRATAP
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Comb drive;
- Tunable resonator;
- Voltage-controlled oscillator;
31.CHARACTERISTICS OF MICROMACHINED SHORT-EXTERNAL-CAVITY TUNABLE LASERS

机译：微机械短外腔可调激光的特性
- 作者：A. Q. LIU;X. M. ZHANG;J. LI;D. Y. TANG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Tunable laser;
- Blazed grating;
- DWDM;
- Optical MEMS;
32.FABRICATION OF 3-D MICROPARTS FOR THE ASSEMBLY OF SCAFFOLD/CELL CONSTRUCTS IN TISSUE ENGINEERING

机译：组织工程中脚手架/细胞结构组装的3-D微粒子制备
- 作者：HAN ZHANG;FRANCK CHOLLET;ETIENNE BURDET;AUN NEOW POO;DIETMAR WERNER HUTMACHER
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- MEMS;
- Lithography;
- Tissue engineering;
- Scaffold;
33.AXISYMMETRIC TRANSIENT HEAT CONDUCTION ANALYSIS BY BEM VIA PARTICULAR INTEGRALS

机译：利用BEM通过特定积分进行轴对称瞬态传热分析
- 作者：K. H. PARK;P. K. BANERJEE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第4期
- Boundary Element method (BEM);
- Particular Integrals;
- Complementary Solution;
- Potential Flow;
- Heat Conduction;
34.DEVELOPMENT AND COMPARISON OF MICROMACHINED INDUCTORS FOR RF APPLICATIONS

机译：射频应用微机械感应器的开发与比较
- 作者：JIANBO SUN;JIANMIN MIAO;TIETUN SUN;HONG ZHU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Inductor;
- RF;
- High Q;
- Resonant frequency;
- Micromachining;
35.ANALYSIS AND COMPARISON OF FLEXURE STRUCTURES USED IN 3-D ELECTROSTATIC MICROACTUATORS FOR HARD DISK DRIVES

机译：用于硬盘驱动器的3-D静电微致动器中挠曲结构的分析和比较
- 作者：BANGTAO CHEN;JIANMIN MIAO;HONG ZHU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- 3-dimensional;
- Electrostatic;
- Microactuator;
- Flexure;
- Interlapped-L;
36.DESIGN OPTIMIZATION, FABRICATION AND TESTING OF A CAPACITIVE SILICON ACCELEROMETER USING AN SOI APPROACH

机译：采用SOI方法的电容硅加速度计的设计优化，制造和测试
- 作者：K. N. BHAT;B. R. K. REDDY;V. VINOTH KUMAR;K. SIVA KUMAR;Y. SUSHMA;N. RAMESH BABU;K. NATARAJAN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Accelerometer;
- Silicon;
- Silicon On Insulator;
- KOH etching;
- Finite Element Method;
37.IMPACT OF DEPOSITION PARAMETERS ON THE CHARACTERIZATIONS OF HIGHLY ORIENTATED ALUMINUM NITRIDE FOR FILM BULK ACOUSTIC RESONATOR DEVICE

机译：沉积参数对薄膜本体声波谐振器高取向氮化铝特性的影响
- 作者：JIANG NING;RAJNISH K. SHARMA;FENG HANHUA;WANG ZHE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- FBAR;
- Aluminum Nitride;
- Deposition Parameters;
- Impact;
38.APPLICATION OF MICRO HOT EMBOSSING FOR MEMS STRUCTURES

机译：微热压花在MEMS结构中的应用
- 作者：Y. MURAKOSHI;X. C. SHAN;R. MAEDA
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- MEMS;
- Optical switch;
- Mirror;
- Polycarbonate;
- Hot embossing;
39.FABRICATION OF CONCAVE AND CONVEX MICRO-OPTICAL ELEMENTS WITH POLYMER FOR FREE-SPACE MICRO-OPTICAL BENCH

机译：自由空间微光台用聚合物制造凹形和凸形微光学元件
- 作者：FRANCK CHOLLET;LOW CHUN HONG;LEE SOK KIM;YANG CHUN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Optical MEMS;
- Micro-lens;
- SU8;
- Micro-molding;
- Diverging lens;
40.DEVELOPMENT OF AN SOI-BASED MICRO CHECK VALVE

机译：基于SOI的微型止回阀的开发
- 作者：MIN HU;HEJUN DU;SHIH-FU LING;BO LIU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Micro Check Valve;
- Micro Fluidic System;
- SOI Wafer;
- DIRE;
41.STUDY OF ELECTROLESS NICKEL ON POLISHED SILICON FOR MEMS APPLICATIONS

机译：MEMS应用中抛光硅上的化学镍的研究
- 作者：V. PRADEEP KUMAR;S. KARMALKAR
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Electroless plating;
- Nickel;
- Polished silicon;
- Adhesion;
- Activation;
- MEMS;
42.NANOSTRUCTURED AGGREGATES FROM THE SELF-ASSEMBLY OF BAB TRIBLOCK COPOLYMERS WITH A HYDROPHILIC MIDDLE BLOCK A IN WATER

机译：BAB三嵌段嵌段共聚物与亲水性中间嵌段A在水中的自组装纳米结构体
- 作者：JIAN-JUN YUAN;SHI-YUAN CHENG;LEI JIANG;LIN-XIAN FENG;ZHI-QIANG FAN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Block Copolymer;
- Self-Assembly;
- Micellar Aggregates;
- Vesicles;
43.GAP OPTIMISATION FOR PROXIMITY X-RAY LITHOGRAPHY USING THE SUPER-RESOLUTION PROCESS

机译：使用超分辨过程的近距离X射线照相术的间隙优化
- 作者：JONG REN KONG;OLIVER WILHELMI;HERBERT O. MOSER
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- X-ray lithography;
- Super-resolution process;
- Proximity gap;
- Synchrotron radiation;
44.A NEW LATERAL RF SWITCH USING SOI-DEEP-ETCHING FABRICATION PROCESS

机译：采用深腐蚀制造工艺的新型横向射频开关
- 作者：M. TANG;A. AGARWAL;P. WIN;Q. X. ZHANG;J. LI;A. Q. LIU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Lateral RF MEMS switch;
- SOI;
- DRIE;
45.DRY AND WET ETCHING WITH (111) SILICON FOR HIGH-PERFORMANCE MICRO AND NANO SYSTEMS

机译：（111）硅干湿法刻蚀，用于高性能微纳米系统
- 作者：DONG-IL DAN CHO;BYOUNG-DOO CHOI;SANGWOO LEE;SEUNG-JOON PAIK;SANGJUN PARK;JAEHONG PARK;YONGHWA PARK;JONGPAL KIM;IL-WOO JUNG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Micro and nano systmes;
- SBM process;
- (111) silicon;
46.THE DEVELOPMENT OF A POLYMER BASED PIEZO-ACTUATED MICROPUMP

机译：基于聚合物的压电致动微型泵的开发
- 作者：H. LIU;STEPHEN Y. M. WAN;G. C. LIM;ANDREW A. O. TAY
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Polymer;
- Laser Microfabrication;
- Fusion Bonding;
- Microvalve;
47.TiNi FILM BASED SHAPE MEMORY ALLOY AND MICROACTUATORS

机译：基于TiNi膜的形状记忆合金和微致动器
- 作者：YONGQING FU;HEJUN DU;WEIMIN HUANG;MIN HU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Shape-memory;
- TiNi;
- Sputtering;
- Thin Films;
- MEMS;
- Microactuator;
48.A NOVEL SOI MICROMACHINED RELAY FOR TRUE-TIME-DELAY SYSTEMS APPLICATIONS

机译：实时延时系统应用的新型SOI微机继电器
- 作者：P. WIN;A. Q. LIU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Lateral Relay;
- True-time-delay;
- DRIE;
- SOI;
49.THERMAL STABILITY AND RESULTING SURFACE MECHANICAL PROPERTIES OF ELECTROPLATED NANOCRYSTALLINE Ni-BASED MEMS MATERIAL

机译：电镀纳米镍基微机电材料的热稳定性和表面力学性能
- 作者：K. Lian;J. C. Jiang;S. Wen;C. G. Liu;Z. G. Ling
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Nanocrystalline Ni;
- Electroplated Ni;
- Thermal stability;
- Microhardness;
- And microstructures;
50.SAFE OPERATION CONDITIONS OF CAPACITIVE INERTIAL SENSOR FOR DYNAMIC SIGNALS

机译：动态信号电容式惯性传感器的安全操作条件
- 作者：MINHANG BAG;YUANCHENG SUN;YIPING HUANG;YUELIN WANG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Capacitive sensor;
- Safe operation condition;
- Dynamic signal;
51.OPTICAL SWITCH BASED ON MOVING POLYMER WAVEGUIDES AND SELF-LATCHING STRUCTURE

机译：基于移动聚合物波导和自锁结构的光开关
- 作者：H. B. LIU;F. CHOLLET
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Optical Switch;
- MEMS;
- Waveguide;
- Self-Latching;
- SWOMS;
52.THE k-VERSION OF FINITE ELEMENT METHOD FOR NON-SELF-ADJOINT OPERATORS IN BVP

机译：BVP中非自伴算子的有限元方法的k版本
- 作者：K. S. SURANA;A. R. AHMADI;J. N. REDDY
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第4期
53.A NOVEL APPLICATION OF CONTACT FRICTION FOR LATERALLY MOTION TUNABLE ACCELERATION-THRESHOLD SWITCH: MODELING AND SIMULATION

机译：接触摩擦在侧向运动可调加速度-阈值开关中的新应用：建模与仿真
- 作者：J. C. Chiou;Y. J. Lin
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Tunable;
- Acceleration-threshold;
- Friction;
- Dynamic simulation;
54.MECHANICAL, THERMAL AND ELECTRICAL BEHAVIOUR OF Si STRAIN GAUGE

机译：硅应变片的机械，热和电性能
- 作者：M. HUSAK;P. KULHA;J. JAKOVENKO;Z. VYBORNY
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Strain gauge;
- Piezorezistive;
- Cantilever;
- Mechanical deformation;
- Simulation;
55.FABRICATION PROCESS OF A CAPACITIVE MICROPHONE WITH DIAPHRAGM AND SILICON BONDED TOP-PLATE

机译：膜片与硅键合的电容性麦克风的制备工艺
- 作者：CIPRIAN ILIESCU;TIETUN SUN;JIANMIN MIAO;FRANCIS TAY
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Silicon capacitive microphone;
- p++ diaphragm;
- Eutectic bonding;
56.LOW COST MICRO-PCR ARRAY AND MICRO-FLUIDIC INTEGRATION ON SINGLE SILICON CHIP

机译：低成本的单芯片芯片微PCR阵列和微流体整合
- 作者：YUBO MIAO;YU CHEN;QUANBO ZOU;JANAK SINGH;TIE YAN;CHEW-KIAT HENG;TIT MENG LIM
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- uPCR array;
- Thermal cycling;
- Membrane sealing;
- Microfluidics integration;
57.A DIGITAL/ANALOG ELECTROSTATIC ACTUATING MECHANISM FOR OPTICAL APPLICATIONS

机译：光学应用中的数字/模拟静电驱动机理
- 作者：Y. C. LIN;J. C. CHIOU;C. L. CHEN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Digital/analog;
- Pull-in;
- Morph-shape;
- Poly-MUMPs;
58.Evaluation of gas-kinetic schemes for solving 1D inviscid compressible flow problems

机译：求解一维无粘性可压缩流动问题的气体动力学方案的评估
- 作者：ONG JIUNN CHIT;ASHRAF ALI OMAR;WAQAR ASRAR
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第4期
- Gas-kinetic schemes;
- High-resolution scheme;
- MUSCL approach;
- compressible inviscid flow;
59.THE MESHLESS APPROACH FOR THE CELL METHOD: A NEW WAY FOR THE NUMERICAL SOLUTION OF DISCRETE CONSERVATION LAWS

机译：细胞方法的无网格法：离散守恒律数值解的新方法
- 作者：LUIGINO ZOVATTO;MATTED NICOLINI
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第4期
- Discrete formulation;
- Cell Method;
- Meshless Approach;
- FEM;
60.MICROMECHANICAL THERMAL CONVERTER DEVICE BASED ON POLYIMIDE-FIXED ISLAND STRUCTURE

机译：基于聚酰亚胺固定岛结构的微机械热转换器
- 作者：T. LALINSKY;M. KRNAC;S. HASCIK;Z. MOZOLOVA;L. MATAY;I. KOSTIC;P. HRKUT;J. JAKOVENKO;M. HUSAK
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- GaAs;
- MEMS;
- HEMT;
- Micromechanical Thermal Converter;
61.STUDIES IN NONLINEAR EFFECTS OF SQUEEZE FILM DAMPING IN MEMS STRUCTURES

机译：MEMS结构中薄膜挤压阻尼的非线性效应研究
- 作者：ASHOK K. PANDEY;R. PRATAP
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Nonlinear Squeeze film damping;
- Cutoff squeeze number;
- Quality factor;
62.NANOMETER-SCALE PATTERNING ON TITANIUM THIN FILM WITH LOCAL OXIDATION OF SCANNING PROBE MICROSCOPE

机译：扫描探针显微镜局部氧化在钛薄膜上进行纳米级刻蚀
- 作者：JENG T. SHEU;CHENG C. CHEN;SUN P. YEH;HSEIH T. CHOU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Titanium;
- Atomic force microscope;
- Field-induced oxidation;
- Nanometer-scale structures;
63.INSTRUCTIONS MICROMACHINED TUNALBE FILTER VIA ACTUATION OF FABRY-PAROT CAVITY

机译：通过微调法布里-珀罗腔进行的微机可调滤光片说明
- 作者：J. LI;J. B. ZHANG;X. M. ZHANG;C. LU;Q. X. ZHANG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- MEMS;
- Tunable optical filter;
- Deep etching;
- Fiber communication;
64.TWO-DIMENSIONAL THERMAL ANALYSIS OF MULTI-LAYER THIN FILM PYROELECTRIC INFRARED DETECTORS

机译：多层薄膜热释电红外探测器的二维热分析
- 作者：WEI ZHANG;XI YAO;AND XIAOQING WU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Thermal analysis;
- Pyroelectric;
- Infrared;
- Finite element;
65.A NON-CONTACT MICRO THERMOCYCLING CHIP FOR POLYMERASE CHAIN REACTIONS

机译：聚合酶链反应的非接触微热芯片
- 作者：YUANZHI LAO;FRANCIS E. H. TAY;GUOLIN XU;DIANA HARTONO;Y. Y. LEE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Micro thermocycling chip;
- Polymerase chain reaction (PCR);
- Induction heating;
- Non-contact heating;
66.AN INTEGRATED SYSTEM FOR REAL-TIME PCR ANALYSIS BASED ON MICROFLUIDIC BIOCHIP

机译：基于微生物芯片的实时荧光定量PCR综合分析系统
- 作者：QINGHUI WANG;YIN TAN;HAIQING GONG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Instrumentation;
- Thermal cycling;
- PCR;
- Biochip;
67.(100)-ORIENTED PZN-xPT THIN FILMS GROWN ON LaNiO{sub}3 SEEDING LAYERS

机译：在LaNiO {sub} 3层上生长的（100）取向PZN-xPT薄膜
- 作者：SHUHUI YU;KUI YAO;FRANCIS ENG HOCK TAY
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- PZN-xPT;
- Ferroelectric thin film;
- Orientation;
- Sol-gel;
68.A MULTI-COEFFICIENT SLIP MODEL FOR ULTRA-THIN GAS FILM LUBRICATION

机译：超薄气体膜润滑的多系数滑模模型
- 作者：E. Y-K. NG;N. Y. LIU;C. H. ANG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Multi-coefficient model;
- Transition regime;
- Knudsen number;
- Taguchi method;
69.SLIDE FILM DAMPING AND SQUEEZE FILM DAMPING MODELS CONSIDERING GAS RAREFACTION EFFECTS FOR MEMS DEVICES

机译：考虑MEMS设备的气体反射效应的滑动膜阻尼和挤压膜阻尼模型
- 作者：ANDOJO ONGKODJOJO;FRANCIS E. H. TAY
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- MEMS;
- Slide film damping;
- Squeeze film damping;
- Gas rarefaction effects;
- Modeling;
70.LOCAL GROWTH OF SOL-GEL FILMS BY MEANS OF MICROHOTPLATES

机译：微量胶化物在溶胶-凝胶薄膜中的局部生长
- 作者：F. CALAME;J. BABOROWSKI;N. LEDERMANN;P. MURALT
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Hotplates;
- Tantalum silicide;
- Local growth;
- PZT;
71.LOW TEMPERATURE SILICON WAFER BONDING BY SOL-GEL PROCESSING

机译：溶胶-凝胶法低温硅键合
- 作者：S. S. DENG;J. WEI;C. M. TAN;M. L. NAI;W. B. YU;H. XIE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Wafer Bonding;
- Sol-gel Processing;
- Bond Strength;
- Factorial Design;
72.SYNTHESIS AND CHARACTERISATION OF ALKANETHIOLATED NANOGOLD CLUSTERS FOR BioMEMS APPLICATIONS

机译：用于生物微机电应用的碱化纳米金团簇的合成与表征
- 作者：WONG YEE TING;M. MANIMARAN;FRANCIS E. H. TAY
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Alkanethiolated nanogold clusters;
- EDX;
- XPS;
- SEM;
- TEM;
- BioMEMS devices;
73.SIMULATION OF LARGE MEMBRANE DEFORMATION IN AN ELECTROCHEMICAL ACTUATOR

机译：电化学执行器中大膜变形的模拟
- 作者：Yuan Xu;Christina Yuan Ling Tan;Wen Ping Wang;Eng Hock Tay
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Electrochemical actuator;
- Electrochemical pump;
- Finite element analysis;
- FEA;
- Liquid delivery device;
- Drug delivery device;
74.NUMERICAL ANALYSIS OF THE EDL EFFECT ON LIQUID FLOW IN MICROCHANNELS

机译：EDL对微通道内液体流动影响的数值分析
- 作者：X. Y. CHEN;C. YANG;K. C. TOH;J. C. CHAI
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Microchannel flow;
- Electrokinetic effect;
75.THIN FILM FORMATION ON NON-PLANAR SURFACE WITH USE OF SPRAY COATING FABRICATION

机译：使用喷涂涂层在非平面表面上形成薄膜
- 作者：MASAAKI ICHIKI;LULU ZHANG;ZHEN YANG;TSUYOSHI IKEHARA;RYUTARO MAEDA
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Spray coating method;
- Non-planar surface;
- PZT;
- Film formation;
76.WAFER BONDING PROCESS BASED ON THE TAGUCHI ANALYSIS

机译：基于田口分析的晶圆键合过程
- 作者：J. WEI;F. L. NG;M. L. NAI;H. XIE;P. C. LIM;C. K. WONG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Wafer Bonding;
- Taguchi Method;
- Bond Efficiency;
- Bond Strength;
- Mechanisms;
77.MICROMACHINING PROCESS OF PIEZOELECTRIC MICROCANTILEVER USING PZT THIN FILM

机译：PZT薄膜对压电微悬臂梁的微细加工工艺
- 作者：HONG ZHU;JIANMIN MIAO;BANTAO CHEN;ZHIHONG WANG;WEIGUAN ZHU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- PZT thin film;
- Sol-gel;
- Microcantilever;
- Micromachine process;
78.MODELING OF A TWO-AXIS TORSIONAL MICROMIRROR USING AHDL

机译：使用AHDL对两轴扭转微镜进行建模
- 作者：GUANGYA ZHOU;FRANCIS E. H. TAY;FOOK SIONG CHAU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- MEMS;
- Optical MEMS;
- Micro mirror;
- AHDL;
- Modeling;
79.FABRICATION OF ULTRAHIGH-DENSITY NANO-PYRAMID ARRAYS (NPAs) ON (100) SILICON WAFER USING SCANNING PROBE LITHOGRAPHY AND ANISOTROPIC WET ETCHING

机译：利用扫描探针光刻和各向异性湿法刻蚀在（100）硅晶片上制备超高密度纳米金字塔阵列（NPAs）
- 作者：JENG T. SHEU;CHENG C. CHEN;SUN P. YEH;HSEIH T. CHOU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Nano-pyramid Arrays;
- Scanning probe lithography;
- Atomic force micro-scope;
- Orientation-dependent etching;
80.A NOVEL MEMS FABRY-PEROT MICROCAVITY STRUCTURE FOR PRESSURE SENSING APPLICATION

机译：用于压力感测的新型MEMS微细孔微结构
- 作者：W. J. WANG;R. M. LIN;T. T. SUN;D. G. GUO
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Fabry-Perot;
- Corrugated diaphragm;
- Pressure sensor;
81.CHARACTERIZATION AND APPLICATION OF PAG DILUTED SU-8

机译：PAG稀释SU-8的表征与应用
- 作者：ZHONG-GENG LING;KUN LIAN;JIAN ZHANG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- SU-8;
- PAG concentration;
- Lithographic sensitivity;
- UV absorption;
- 3D microstructure;
82.CHARACTERIZATION OF ELECTROOSMOTIC FLOW IN MICROCHANNELS

机译：微通道中电渗流的表征
- 作者：C. YANG;T. N. WONG;Y. L. LEU;K. T. OOI;J. C. CHAI
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Electroosmotic flow;
- Zeta potential;
- Current monitoring method;
83.3D STRUCTURES FORMATION IN A SINGLE LAYER SU-8 CAR USING DUAL UV AND ELECTRON-BEAM LITHOGRAPHY

机译：使用双层UV和电子束光刻技术在单层SU-8轿车中形成3D结构
- 作者：V. A. KUDRYASHOV;X-C. YUAN;T. L. TAN;P. LEE;S. F. A. KARIM;B. L. TAN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- UV and e-beam lithographies;
- Chemically amplified resist;
- SU-8;
- Infrared spectroscopy;
84.POWER GENERATION AT THE MICRO SCALE

机译：微型发电
- 作者：W. M. YANG;S. K. CHOU;C. SHU;Z. W. LI;H. XUE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Power MEMS;
- Microthermophotovoltaic;
- Selective emitter;
- Photovoltaic cells;
85.FABRICATION OF SMOOTH DIAMOND-LIKE CARBON MICRO-CANTILEVER ARRAYS

机译：光滑钻石状碳微悬臂梁阵列的制造
- 作者：D. SHEEJA;B. K. TAY;L. J. YU;J. MIAO;Y. Q. FU;D. H. C. CHUA;W. I. MILNE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Micro-cantilever arrays;
- Diamond-like carbon;
- Low stress films;
- MEMS;
86.MULTI-DIRECTIONAL DUAL COMB-DRIVE ACTUATOR FOR OPTICAL APPLICATIONS

机译：光学应用的多向双梳状驱动器
- 作者：W. T. Lin;J. C. Chiou
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Dual comb-drive actuator;
- Laser Doppler Vibrometer (LDV);
- Self-alignment technology;
87.SUB-MICRON PATTERNING TITANIUM NITRIDE BY FOCUSED ION-BEAM TECHNIQUE

机译：聚焦离子束技术亚微米级刻蚀氮化钛
- 作者：JIANXIA GAO;MARY B.CHAN-PARK;DONGZHU XIE;BRYAN K. A. NGOI;CHEE YOON YUE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- FIB;
- Titanium nitride;
- Mold;
88.COMPUTER SIMULATION OF FLIP-CHIP UNDERFILL ENCAPSULATION PROCESS USING MESHFREE PARTICLE METHOD

机译：细粒子法在倒装芯片封装过程的计算机模拟中的应用
- 作者：M. B. LIU;G. R. LIU;K. Y. LAM
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Underfill encapsulation;
- Smoothed particle hydrodynamics;
- Micro channel flow;
89.SU-8 ON PMMA - A NEW TECHNOLOGY FOR MICROFLUIDICS

机译：SU-8 ON PMMA-微流体的新技术
- 作者：T. Q. TRUONG;N. T. NGUYEN
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Microfluidics;
- SU-8;
- PMMA;
- Fabrication;
- Photolithography;
90.SYSTEM LEVEL SIMULATIONS OF MEMS BASED ON REDUCED ORDER FINITE ELEMENT MODELS

机译：基于降阶有限元模型的MEMS系统级仿真
- 作者：F. BENNINI;J. MEHNER;W. DOTZEL
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Macromodeling;
- Modal decomposition;
- Nonlinear dynamics;
- Coupled domain simulations;
91.THIN SILICON STRUCTURES FABRICATION BY WET ANISOTROPIC ETCHING

机译：湿各向异性刻蚀制造薄硅结构
- 作者：AJAY AGARWAL;X. L. ZHANG;T. GAN;J. SINGH
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Thin silicon;
- P-n junction;
- Electrochemical etching;
- KOH solution;
92.A NOVEL WAFER-LEVEL PACKAGING SOLUTION FOR MEMS

机译：适用于MEMS的新型晶圆级包装解决方案
- 作者：Z. F. WANG;G. J. QI;J. WEI;P. C. LIM;Y. F. JIN;C. K. WONG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Microelectromechanical system;
- Wafer level packaging;
- Eutectic bonding;
- Wafer thinning;
93.CHARACTERIZATION OF MICROFLUIDIC DEVICES USING MICRO PARTICLE IMAGE VELOCIMETRY

机译：使用微颗粒图像测速仪表征微流体设备
- 作者：ZHIGANG WU;THAI-QUANG TRUONG;NAM-TRUNG NGUYEN;XIAO-YANG HUANG
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Microfluidic;
- Characterization;
- μPIV;
- MicroChannel;
- Tesla Valve;
94.HOT EMBOSSING FOR MEMS USING SILICON TOOLS

机译：使用硅工具的MEMS热压花
- 作者：MATTHIAS KUCHLER;THOMAS OTTO;THOMAS GESSNER;FRANK EBLING;HENNING SCHRODER
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- Hot embossing;
- Silicon tool;
- DRIE;
95.FINITE ELEMENT ANALYSIS OF TIME-DEPENDENT BUCKLING OF POLYSILICON MICRO BEAMS WITH TEMPERATURE-DEPENDENT PROPERTIES

机译：随温度变化特性的随时间变化的多晶硅微梁的有限元分析
- 作者：M. SHAMSHIRSAZ;M. BAHRAMI;M. TAYEFEH
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Post-buckling;
- Temperature-dependent;
- Time-dependent;
- Micro beam;
- Polysilicon;
96.ELECTRICAL IMPEDANCE AND ENERGY DISSIPATION ANALYSES OF QUARTZ CRYSTAL MICROBALANCE FOR POLYMER COATING

机译：聚合物涂层石英晶体微平衡的电阻抗和能量耗散分析。
- 作者：AL. PALANIAPPAN;J. ZHANG;XIAODI SU;FRANCIS E. H. AY
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- QCM;
- Dissipation factor;
- Quality factor;
97.NEAR-WALL HOT-WIRE CORRECTION BASED ON Y{sup}+ AND H{sub}0

机译：基于Y {sup} +和H {sub} 0的近壁热线校正
- 作者：W. Z. LI;B. C. KHOO;D. XU
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Hot-wire correction factor;
- Near-wall measurement;
98.ZEOLITE AND POLYMER FILM BIO-CHEMICAL MEMS SENSORS

机译：沸石和聚合物膜生物化学微传感器
- 作者：YIPING HUANG;JILIE KONG;JIA ZHOU;YINGCAI LONG;PO LI;HAIFEN XIE;MINHANG BAO
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Sensor arrays;
- Microcantilever;
- Zeolite;
- Polymer-based sensor;
- Gas sensor;
- Immunosensor;
99.SIMULATION AND CHARACTERIZATION OF PIEZOELECTRIC MICROMACHINED ULTRASONIC TRANSDUCERS (pMUTs) BASED ON PZT/SOI MEMBRANES

机译：基于PZT / SOI膜的压电微机械超声传感器（pMUT）的仿真和表征
- 作者：JACEK BABOROWSKI;NICOLAS LEDERMANN;PAUL MURAL
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第3期
- pMUTs;
- PZT;
- FEA simulations;
100.FABRICATION OF POLYMER MICROSYSTEMS

机译：聚合物微系统的制造
- 作者：VOLKER SAILE
- 期刊名称：《International Journal of Computational Engineering Science(IJCES)》 | 2003年第2期
- Microfabrication;
- Deep X-ray lithography;
- Hot embossing;
- Micro-optics;
- Micro-fluidics;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号