首页>外文期刊>交通运输>水路运输>International journal of automobile engineering research and development

International journal of automobile engineering research and development

ISSN：2277-4785
出版周期：Bimonthly

发文量：36

期刊论文

热门论文

年度选择

2022
- 第1期
- 第2期
2021
- 第2期
2020
- 第1期
- 第2期
2019
- 第1期
- 第2期
2018
- 第1期
- 第2期
2017
- 第1期
2016
- 第1期
- 第2期
- 第3期
- 第4期
2015
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2014
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2013
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
2012
- 第1期
- 第2期
- 第3期

更多>>

全选（0）

1.EFFECT OF ADD-ON AND SURFACE FINISH ON AERODYNAMIC DRAG OF A PASSENGER CAR

机译：附加和表面处理对乘用车气动阻力的影响
- 作者：KESARI V.;MURTAZA M. A.
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第4期
- Scale Model;
- Passenger Car In Wind Tunnel;
- Vehicle And Reduction Of Aerodynamic Drag;
- Engine Efficiency;
2.NUMERICAL ANALYSIS OF INDUCTANCE LOSS DUE TO INFLUENCE OF WINDING DESIGN

机译：绕线设计对电感损耗的数值分析
- 作者：BK KHOO;M. OVINIS;T. NAGARAJAN
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第4期
- EMI Suppression Inductor;
- Inductance Loss;
- Winding Design;
3.PANIC BRAKING DETECTION OF VEHICLE BY ENGINE RPM GRADIENT: A SENSOR LESS SAFETY APPLICATION

机译：发动机转速梯度对汽车的制动制动检测：一种传感器安全性较低的应用
- 作者：DILEEP KUMAR BHOI;DEVESH SINGH PATEL
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第2期
- Panic Braking Detection;
- Vehicle Plant Model;
- Engine Management System;
- Microcontroller;
- Simulation;
4.STRUCTURAL ANALYSIS OF ROTOR DISC OF DISC BRAKE OF BAJA SAE 2013 CAR THROUGH FINITE ELEMENT ANALYSIS

机译：BAJA SAE 2013碟刹盘转子盘结构的有限元分析。
- 作者：ISHWAR GUPTA;GAURAV SAXENA
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第1期
- SAE BAJA 2013;
- Rotor Disc;
- Composite Materials;
- PRO/E Wildfire 4.0;
- FEA;
- ANSYS13.0;
5.DRAG AND LIFT REDUCTION ON PASSENGER CAR WITH REAR SPOILER

机译：带后扰流板的乘用车的起重和减重
- 作者：R. B. SHARMA;RAM BANSAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第3期
- Aerodynamic Drag;
- Coefficient of Drag;
- Coefficient of Lift;
- Spoiler;
- Wind Tunnel Simulation;
- ANSYS FLUENT;
- Generic Passenger Car;
- CFD;
6.ANALYSIS OF PERFORMANCE OF VARIOUS MODELS OF COPPER BASED CATALYTIC CONVERTERS BY C.F.D. TECHNIQUES

机译：用C.F.D.分析各种基于铜的催化转化器的性能技巧
- 作者：K. S. UMESH;V. K. PRAVIN;K. RAJAGOPAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第1期
- CFX;
- CATIA V5;
- Gambit 2.2;
- DETCHEM;
- Fluent 6.2;
7.DESIGN AND EXPERIMENTAL CONSTRUCTION OF A SIX-STROKE ENGINE WITH WATER INJECTION

机译：注水六冲程发动机的设计与实验建造
- 作者：BALSE A. U.;SHARMA S. U.;SINGH A. A.;NARVEKAR P. P.
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第4期
- Efficiency;
- Engine-Head;
- Injection;
- Six-Stroke;
- Water;
8.PERFORMANCE EVALUATION OF CRUDE JATROPHA OIL IN A LOW GRADE LOW HEAT REJECTION DIESEL ENGINE

机译：低级低热排斥柴油机中粗麻风树油的性能评估
- 作者：P. PAVAN KUMAR;S. MURALI;P. V. K. MURTHY;M. V. S. MURALI KRISHNA
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第2期
- Crude Jatropha Oil;
- LHR Engine;
- Fuel Performance;
- Exhaust Emissions;
- Combustion Characteristics;
9.CONSTRUCTION AND LAYOUT OF AN ALTERED SHOCK ABSORBER CONSISTING OF CONCENTRIC SPRINGS OF DIFFERENT DAMPING CO-EFFICIENTS

机译：不同阻尼系数集中弹簧的交替减震器的构造与布局
- 作者：JAIN SUMIT;SEAN DSILVA
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第1期
- Shock Absorber;
- Spring;
- Comfortable Ride;
- Heavy Vehicles;
- Easy Handling;
10.STATIC AND DYNAMIC ANALYSIS OF CONNECTING ROD OF COMPRESSOR

机译：压缩机连杆的静动力分析
- 作者：SHRIRAM A. PHAD;D. H. BURANDE
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第3期
- Connecting Rod;
- FEA Analysis;
- Failure Index;
11.DRAG AND LIFT REDUCTION ON PASSENGER CAR WITH REAR SPOILER

机译：带后扰流板的乘用车的起重和减重
- 作者：R. B. SHARMA;RAM BANSAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第5期
- Aerodynamic Drag;
- Coefficient of Drag;
- Coefficient of Lift;
- Spoiler;
- Wind Tunnel Simulation;
- ANSYS FLUENT;
- Generic Passenger Car;
- CFD;
12.EFFECT OF INJECTION PRESSURE AND TIMING ON BIODIESEL FUELLED ENGINE

机译：注射压力和时间对生物柴油发动机的影响
- 作者：GODWIN K. AYETOR;ALBERT SUNNU;JOSEPH PARBEY
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第4期
- Injection Timing;
- Injection Pressure;
- Biodiesel;
- Renewable Energy;
- Automotive;
- Alternative Fuels;
13.FINITE ELEMENT SIMULATIONS AND CHARACTERIZATION OF AIRBAGS USING DOE

机译：使用DOE进行气囊的有限元模拟和表征
- 作者：BHAGEERATHA K. R.;C. ANIL KUMAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第6期
- Airbag;
- Shape;
- Pressure;
- Drop Height;
- Airbag Characterization;
- Finite Element Method;
- Design of Experiments;
14.EFFECTIVENESS OF MLC CAPACITORS FOR ELECTROSTATIC DISCHARGE PROTECTIONS IN AUTOMOTIVE ECUs

机译：MLC电容器在汽车ECU静电放电保护中的功效
- 作者：TAMILARASU S.;P. THIRUNAVUKKARASU;N. SETHUPATHI
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第5期
- SMD MLCC;
- ESD Protection Devices;
- Electronic Control Unit (ECU);
15.EXPERIMENTAL INVESTIGATION OF A INIMITABLE PLATFORM ON HEAVY VEHICLE CHASSIS

机译：重型汽车底盘上可仿制平台的实验研究
- 作者：DEULGAONKAR VIKAS RADHAKRISHNA;MATANI ASHOK GURMUKHDAS
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第5期
- Platform Structure;
- Strain Signal;
- Data Acquisition Systems;
- Tri-Axial Stresses;
- Dynamic Strain;
16.TECHNICAL REVIEW ON STUDY OF COMPRESSED AIR VEHICLE (CAV)

机译：压缩空气汽车研究的技术回顾
- 作者：HEMANT KUMAR NAYAK;DEVANSHU GOSWAMI;VINAY HABLANI
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第2期
- Compressed Air Vehicle;
- Fuel Engine;
- Compressed Air Technology;
17.FAILURE ANALYSIS OF WHEEL RIM

机译：轮辋的失效分析
- 作者：TRAPTI SHARMA;MUGDHA SHRIVASTAVA;PRATESH JAYASWAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第2期
- Failure Analysis;
- Blank Size Reduction Process;
18.STATIC ANALYSIS OF WELDLESS EXHAUST SYSTEM FITTING BY FEA

机译：基于FEA的无排气系统配合静态分析。
- 作者：BHADULE A. A.;YADAV S. D.
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第6期
- Development Project;
- Manifold;
- Flange;
- Pipe;
- End Shaping;
- Weldless FEA;
19.STATIC AND DYNAMIC ANALYSIS OF CONNECTING ROD OF COMPRESSOR

机译：压缩机连杆的静动力分析
- 作者：SHRIRAM A. PHAD;D. H. BURANDE
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第5期
- Connecting Rod;
- FEA Analysis;
- Failure Index;
20.ANALYSIS OF PERFORMANCE OF VARIOUS METAL CATALYSTS USED IN CATALYTIC CONVERTERS WITH MC-2 CONFIGURATION BY C.F.D. TECHNIQUES

机译：用C.F.D.分析MC-2构型的催化转化器中使用的各种金属催化剂的性能技巧
- 作者：K. S. UMESH;V. K. PRAVIN;K. RAJAGOPAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第1期
- CFX;
- CATIA V5;
- Gambit 2.2;
- DETCHEM;
- Fluent 6.2;
- MC-2 Configuration;
- Porosity;
- Wash Coat Thickness;
- Relative A: F Ratio;
21.AUTOMOTIVE RADIATOR - DESIGN AND EXPERIMENTAL VALIDATION

机译：汽车散热器-设计和实验验证
- 作者：PAWAN S. AMRUTKAR;SANGRAM R. PATIL;S. C. SHILWANT
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第3期
- Automotive Radiator;
- Heat Transfer;
- Simulation;
- Sizing;
- Performance;
22.CUSTOMIZING VEHICLE CONTROL BY INTEGRATING ELECTRONIC CONTROL UNIT SIGNAL FROM MULTI-POINT VEHICLES

机译：通过集成多点车辆的电子控制单元信号来定制车辆控制
- 作者：SINDHU L. S.;MONA P. SHERKI;KALYANI A. SHIROLE;G. SASIKALA;ANITHA
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第6期
- RFM12B;
- Electronics Control Unit;
- Voice Coded Signal;
- FSK;
- ISM;
23.DISASSEMBLABILITY AND REASSEMBLABILITY PARAMETERS ANALYSIS: AUTOMOBILE MAINTENANCE CONTEXT STUDY

机译：可分解性和可重复性参数分析：汽车维修上下文研究
- 作者：SAMON JEAN BOSCO;NZIE WOLFGANG;DJEUMAKO BONAVENTURE;BEDA TIBI
- 期刊名称：《International journal of automobile engineering research and development》 | 2015年第1期
- Disassemblability;
- Reassemblability;
- Evaluation;
- Disassembly/Reassembly Metrics;
- Modeling;
- Maintenance;
24.THERMAL ANALYSIS OF ADVANCED IC ENGINE CYLINDER

机译：先进IC发动机气缸的热分析。
- 作者：K. B. SAI SANJANA;K. SAI MOUNIKA;T. RAJA SANTHOSH KUMAR;D. V. SRIKANTH
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第3期
- Optimization;
- Design;
- Weight;
- Heat Transfer Analysis;
- IC Engine;
25.IMPACT OF INJECTION TIMING AND INJECTION PRESSURE ON PERFORMANCE PARAMETERS AND COMBUSTION CHARACTERISTICS OF HIGH GRADE SEMI ADIABATIC DIESEL ENGINE WITH COTTON SEED BIODIESEL

机译：喷射时间和喷射压力对棉籽生物柴油高阶半绝热柴油机性能参数及燃烧特性的影响
- 作者：D. SRIKANTH;M. V. S. MURALI KRISHNA;P. USHA SRI
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第1期
- Vegetable Oil;
- Biodiesel;
- LHR Combustion Chamber;
- Fuel performance;
- Combustion Characteristics;
26.FOAM FINNED DOWN FLOW TYPE AUTOMOTIVE RADIATOR RATING AND SIZING

机译：泡沫翅片向下流动式汽车散热器的等级和尺寸
- 作者：SAKESHA;K. M. SUBBAIAH;G. L. SHEKAR;B. K. ANIL KUMAR;ARUL ANAND
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第3期
- Down flow radiator;
- Carbon foam;
- Heat transfer;
- Thermal conductivity (TC);
27.EXPERIMENTAL AND NUMERICAL INVESTIGATION OF DIESEL ENGINE TURBOCHARGER

机译：柴油机涡轮增压器的实验与数值研究
- 作者：BHAVINKUMAR N. PATEL;DATTATRAYA SUBHEDAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第3期
- Ansys CFX;
- Performance;
- Simulation;
- Turbine;
- Turbocharger;
28.FINITE ELEMENT SIMULATIONS AND CHARACTERIZATION OF AIRBAGS USING DOE

机译：使用DOE进行气囊的有限元模拟和表征
- 作者：BHAGEERATHA K. R.;C. ANIL KUMAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第4期
- Airbag;
- Shape;
- Pressure;
- Drop Height;
- Airbag Characterization;
- Finite Element Method;
- Design of Experiments;
29.FINITE ELEMENT SIMULATIONS AND CHARACTERIZATION OF AIRBAGS USING DOE

机译：使用DOE进行气囊的有限元模拟和表征
- 作者：BHAGEERATHA K. R.;C. ANIL KUMAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第2期
- Airbag;
- Shape;
- Pressure;
- Drop Height;
- Airbag Characterization;
- Finite Element Method;
- Design of Experiments;
30.PERFORMANCE EVALUATION OF A DIESEL ENGINE WITH VARYING SHIMS CONFIGURATION FOR DIFFERENT BLENDS OF DIESEL AND ETHANOL

机译：柴油和乙醇不同混合量的不同Shims配置对柴油机性能的评估
- 作者：MAHENDRA SENGAR;SUMAN SOURAV;VAIBHAV KHANTE;VISHAL NAWANDAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第3期
- Diesel Engine;
- Ethanol Blends;
- Fuel Properties;
- Shims and Performance Parameters;
31.AUTOMOTIVE RADIATOR - DESIGN AND EXPERIMENTAL VALIDATION

机译：汽车散热器-设计和实验验证
- 作者：PAWAN S. AMRUTKAR;SANGRAM R. PATIL;S. C. SHILWANT
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第4期
- Automotive Radiator;
- Heat Transfer;
- Simulation;
- Sizing;
- Performance;
32.INFLUENCE OF INJECTION TIMING ON PERFORMANCE PARAMETERS AND COMBUSTION CHARACTERISTICS OF HIGH GRADE SEMI ADIABATIC DIESEL ENGINE WITH COTTON SEED BIODIESEL

机译：喷射正时对棉籽生物柴油中高绝热绝热柴油机性能参数及燃烧特性的影响
- 作者：D. SRIKANTH;M. V. S. MURALI KRISHNA;P. USHA SRI
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第2期
- Vegetable Oil;
- Biodiesel;
- Conventional Engine;
- LHR Combustion Chamber;
- Fuel Performance;
- Combustion characteristics;
- Injection Timing;
33.AUTOMOTIVE RADIATOR - DESIGN AND EXPERIMENTAL VALIDATION

机译：汽车散热器-设计和实验验证
- 作者：PAWAN S. AMRUTKAR;SANGRAM R. PATIL;S. C. SHILWANT
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第2期
- Automotive Radiator;
- Heat Transfer;
- Simulation;
- Sizing;
- Performance;
34.EXPERIMENTAL ANALYSIS OF OPTIMAL GEOMETRY FOR EXHAUST MANIFOLD OF MULTI-CYLINDER SI ENGINE FOR OPTIMUM PERFORMANCE

机译：多缸SI发动机排气歧管最佳几何性能的实验分析。
- 作者：K. S. UMESH;V. K. PRAVIN;K. RAJAGOPAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第4期
- Multi-Cylinder Engine;
- Exhaust Manifold;
- Volumetric Efficiency;
- Existing Model;
- Modified Model;
- Reducer;
- Mechanical Efficiency;
- B.S.F.C.;
- Thermal Efficiency;
- Fuel Economy;
- Optimization;
35.NITROUS OXIDE SYSTEM (NOS) IN AUTOMOBILES

机译：汽车中的一氧化二氮系统（NOS）
- 作者：BAISHAKHI BEHERA;MANISH BEHERA
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第4期
- Nitrous Oxide System (NOS);
- Nitrous;
- Combustion Efficiency;
36.RIGID PVC GEARBOX HOUSING FOR AUTOMOBILES

机译：刚性PVC变速箱外壳
- 作者：VEDAGYA BAKSH;SHIVOMENDRA PATEL
- 期刊名称：《International journal of automobile engineering research and development》 | 2016年第1期
- Gear box casing;
- Optimization;
- Rigid poly vinyl chloride (PVC);
- Transmission;
- Automobiles;
- Weightreduction;
- Power to weight ratio;
37.DESIGN AND FINITE ELEMENT ANALYSIS OF A CAR DOOR ON DIFFERENT SPEEDS & DIFFERENT MATERIALS

机译：不同速度和不同材料车门的设计与有限元分析
- 作者：M. SHAMEER BASHA
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第2期
- Ford 250 car door;
- FEA;
- CATIA amp;
- ANSYS 15;
38.NO NEED OF A CHARGER TO CHARGE AN ELECTRICAL VEHICLE

机译：不需要充电器充电电动车辆
- 作者：MOHIT D. DAGAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第2期
- Electrical vehicle;
- Pollution;
- Charger amp;
- eco-friendly;
39.DESIGN, FABRICATION AND TESTING OF A 4-WAY CATALYTIC CONVERTER FOR REDUCING EXHAUST EMISSION POLLUTION IN A DIESEL AUTOMOBILE ENGINE

机译：4路催化转化器的设计，制造和测试，用于减少柴油汽车发动机排气污染
- 作者：K. SRINIVASA CHALAPATI;T. VENKATESWARA RAO
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第1期
- Diesel oil;
- Pollutants;
- Clay marbles;
- Abatement amp;
- oxygen;
40.DESIGN AND PERFORMANCE OPTIMISATION OF THE STEERING SYSTEM OF A VEHICLE

机译：车辆转向系统的设计与性能优化
- 作者：NITISH MALIK;PRAKHAR AGARWAL;AJAY RAJPUT
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第1期
- Ackermann geometry;
- Turning radius;
- Wheel alignment parameters;
- Cornering forces;
- Roll steer;
- Bump steer amp;
- neutral steer point;
41.ANALYSIS OF PERFORMANCE OF VARIOUS MODELS OF COPPER BASED CATALYTIC CONVERTERS BY C.F.D. TECHNIQUES

机译：C.d的铜基催化转化器各种型号分析。技术
- 作者：K. S. UMESH;V. K. PRAVIN;K. RAJAGOPAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第2期
- CFX;
- CATIA V5;
- Gambit 2.2;
- DETCHEM;
- Fluent 6.2;
42.AUTOMATIC TYRE INFLATION SYSTEM IN DYNAMIC CONDITION

机译：动态条件下的自动轮胎通胀系统
- 作者：RAM BANSAL;SHUBHAM SWAMI;ALIASGERKANCHWALA;MAZHARHUSSAIN
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第1期
43.DESING AND ANALYSIS OF A MASTER CYLINDER FOR HYDRAULIC BRAKING

机译：用于液压制动的主缸的设计与分析
- 作者：SHUBHAM KONDA;MANISH KAPSE;VINEET WANKHADE;MAYUR BHURE;ADITYA THOSAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第2期
- Master cylinder;
- Hydraulic braking system;
- Hydraulic pressure;
- Leverage;
- CAD;
- Creo parametric 3.0 amp;
- ANSYS workbench 15.0;
44.IMPACT OF INJECTION TIMING AND INJECTION PRESSURE ON PERFORMANCE PARAMETERS AND COMBUSTION CHARACTERISTICS OF HIGH GRADE SEMI ADIABATIC DIESEL ENGINE WITH COTTON SEED BIODIESEL

机译：注塑时间和注射压力对棉花种子生物柴油高档半绝热柴油机性能参数及燃烧特性的影响
- 作者：D. SRIKANTH;M. V. S. MURALI KRISHNA;P. USHA SRI
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第2期
- Vegetable Oil;
- Biodiesel;
- LHR Combustion Chamber;
- Fuel performance;
- Combustion Characteristics;
45.INFLUENCE OF INJECTION TIMING ON PERFORMANCE PARAMETERS AND COMBUSTION CHARACTERISTICS OF HIGH GRADE SEMI ADIABATIC DIESEL ENGINE WITH COTTON SEED BIODIESEL

机译：喷射时间对高级半绝热柴油机与棉花种子生物柴油的性能参数和燃烧特性的影响
- 作者：D. SRIKANTH;M. V. S. MURALI KRISHNA;P. USHA SRI
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第2期
- Vegetable Oil;
- Biodiesel;
- Conventional Engine;
- LHR Combustion Chamber;
- Fuel Performance;
- Combustion characteristics;
- Injection Timing;
46.STEADY STATE THERMAL ANALYSIS OF STEPPER MOTOR, USED IN AUTOMOBILE HVAC BLEND DOOR ACTUATOR

机译：步进电机的稳态热分析，用于汽车HVAC混合门执行器
- 作者：ADHIRATH MANDAL;HAENGMUK CHO
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第2期
- Stepper motor;
- Steady state thermal;
- Blend door actuator;
- Hvac amp;
- natural convection;
47.DISRUPTIVE TRENDS AND INCLINATION IN PASSENGER CAR SEGMENT OF FUTURE INDIAN AUTOMOBILE INDUSTRY

机译：未来印度汽车工业乘用车段的破坏性趋势与倾向
- 作者：KRISHNA REDDY;P. V. VIJAY KUMAR REDDY
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第1期
48.NITROUS OXIDE SYSTEM (NOS) IN AUTOMOBILES

机译：汽车中的一氧化氮系统（NOS）
- 作者：BAISHAKHI BEHERA;MANISH BEHERA
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第1期
- Nitrous Oxide System (NOS);
- Nitrous;
- Combustion Efficiency;
49.STRUCTURAL ANALYSIS OF ROTOR DISC OF DISC BRAKE OF BAJA SAE 2013 CAR THROUGH FINITE ELEMENT ANALYSIS

机译：通过有限元分析，Baja SAE 2013汽车圆盘制动器转子圆盘的结构分析
- 作者：ISHWAR GUPTA;GAURAV SAXENA
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第2期
- SAE BAJA 2013;
- Rotor Disc;
- Composite Materials;
- PRO/E Wildfire 4.0;
- FEA;
- ANSYS13.0;
50.CONSTRUCTION AND LAYOUT OF AN ALTERED SHOCK ABSORBER CONSISTING OF CONCENTRIC SPRINGS OF DIFFERENT DAMPING CO-EFFICIENTS

机译：由不同阻尼合作效率的同心弹簧组成的改变减震器的构造和布局
- 作者：JAIN SUMIT;SEAN DSILVA
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第2期
- Shock Absorber;
- Spring;
- Comfortable Ride;
- Heavy Vehicles;
- Easy Handling;
51.AN ANALYSIS OF INDIAN ROAD SPEED BREAKER FOR DESIGN IMPROVEMENT AND INCREASING THE LIFE AXLE OF AUTOMOTIVE VEHICLE BY FINITE ELEMENT METHOD

机译：有限元法对设计改进和增加汽车车辆寿险桥的印度道路速度破碎机分析
- 作者：MANISH BHARGAVA;ANKUR;HARSHA RAMANAND
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第2期
- Speed breaker;
- Wear amp;
- tear;
52.USER AUTHORIZED IGNITION SYSTEM

机译：用户授权点火系统
- 作者：AJITHKUMAR NARAYANAN MANAPARAMPIL;CHAITANYA SHARAD KANDEKAR;AKSHAY HARICHANDRA KAPURE;CHAITANYA RAJENDRA JOSHI
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第1期
- Ignition system;
- Starter;
- Key;
- Android application;
- Fingerprint authentication and user authorized ignition system (UAIS);
53.FOUR WHEEL STEERING SYSTEM WITH MOVABLE HEAD LIGHTS BY USING RACK AND PINION MECHANISM

机译：四轮转向系统采用齿条和小齿轮机构具有可移动头灯
- 作者：K. PRASADA RAO;CH. NAVEENKUMAR;C. NAGA BHASKAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第1期
- Four wheel steering system;
- Rack and pinion mechanism amp;
- movable head light system;
54.STATIC ANALYSIS OF WELDLESS EXHAUST SYSTEM FITTING BY FEA

机译：FEA焊接排气系统静态分析
- 作者：BHADULE A. A.;YADAV S. D.
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第1期
- Development Project;
- Manifold;
- Flange;
- Pipe;
- End Shaping;
- Weldless FEA;
55.CUSTOMIZING VEHICLE CONTROL BY INTEGRATING ELECTRONIC CONTROL UNIT SIGNAL FROM MULTI-POINT VEHICLES

机译：通过从多点车辆集成电子控制单元信号来定制车辆控制
- 作者：SINDHU LS;MONA P. SHERKI;KALYANI A. SHIROLE;G. SASIKALA;ANITHA
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第1期
- RFM12B;
- Electronics Control Unit;
- Voice Coded Signal;
- FSK;
- ISM;
56.EXPERIMENTAL AND NUMERICAL INVESTIGATION OF DIESEL ENGINE TURBOCHARGER

机译：柴油发动机涡轮增压器的实验和数值研究
- 作者：BHAVINKUMAR N. PATEL;DATTATRAYA SUBHEDAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第1期
- Ansys CFX;
- Performance;
- Simulation;
- Turbine;
- Turbocharger;
57.FAULT DIAGNOSIS OF SELF ALIGN ROLLER BEARING AT VARIOUS SPEED USING FREQUENCY DOMAIN

机译：使用频域以各种速度的自对准滚子轴承的故障诊断
- 作者：SHAHZAD AKHTAR;TARSEM SINGH
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第2期
- Overall velocity;
- Much spectrum;
58.THE DESIGN AND VALIDATION OF ENGINE INTAKE MANIFOLD USING PHYSICAL EXPERIMENT AND CFD

机译：使用物理实验和CFD的发动机进气歧管的设计与验证
- 作者：GURU DEEP SINGH;KESHAV KAUSHIK;PRADEEP KUMAR JAIN
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第2期
- Air intake manifold;
- CFD;
- FSAE;
- Engine;
- Converging- diverging nozzle amp;
- variable length intake manifold;
59.THE WEAR CONDITION OF SPUR GEARBOX UNDER VARIABLE LOADS USING WEAR DEBRIS ANALYSIS TECHNIQUE - AN INVESTIGATION

机译：使用磨损碎片分析技术可变载荷下浇口齿轮箱的磨损条件 - 调查
- 作者：A. S. KUSHWAH;R. B. SHARMA
- 期刊名称：《International journal of automobile engineering research and development》 | 2019年第1期
- Gears;
- Wear;
- On-Line particle monitoring;
- Wear debris analysis amp;
- load;
60.RIGID PVC GEARBOX HOUSING FOR AUTOMOBILES

机译：用于汽车的刚性PVC变速箱
- 作者：VEDAGYA BAKSH;SHIVOMENDRA PATEL
- 期刊名称：《International journal of automobile engineering research and development》 | 2018年第2期
- Gear box casing;
- Optimization;
- Rigid poly vinyl chloride (PVC);
- Transmission;
- Automobiles;
- Weightreduction;
- Power to weight ratio;
61.ANALYSIS OF PERFORMANCE OF VARIOUS METAL CATALYSTS USED IN CATALYTIC CONVERTERS WITH MC-2 CONFIGURATION BY C.F.D. TECHNIQUES

机译：C.F.D用MC-2构型催化转化器中使用的各种金属催化剂的性能分析。技术
- 作者：K. S. UMESH;V. K. PRAVIN;K. RAJAGOPAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2017年第1期
- CFX;
- CATIA V5;
- Gambit 2.2;
- DETCHEM;
- Fluent 6.2;
- MC-2 Configuration;
- Porosity;
- Wash Coat Thickness;
- Relative A: F Ratio;
62.THE DESIGN AND ANALYSIS OF ELECTRIC VEHICLE GEARBOX CASING

机译：电动汽车齿轮箱外壳的设计与分析
- 作者：HARSHA. G;SUNIL KUMAR;MOHAN. S
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第1期
- Analysis of gearbox;
- Electric vehicles;
- Modal analysis amp;
- EV transmission;
63.TWO WHEELED VEHICLES E20 FUEL MAGNETIZATION STUDY ON EXHAUST GAS EMISSIONS

机译：两个轮式车辆E20燃油磁化研究 - 废气排放
- 作者：T. H NUFUS;S. L. KUSUMASTUTI;A. ULFIANA;N. HIDAYATI;E. RIDWAN;A. SULISTYOWATI;M. H. TULLAH;I. NURISKASARI;C. S. ABADI
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第1期
- Magnetization;
- Bioethanol;
- Gasoline amp;
- exhaust emissions;
64.DEVELOPMENT OF REVERSE PEDALING BRAKING SYSTEM FOR HYBRID TRICYCLE

机译：混合三轮车逆向踏板制动系统的开发
- 作者：SUYOG KULKARNI;AMOL WADDAMWAR;RAHUL BHUMKAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第2期
- Hybrid tricycle;
- Tadpole configuration amp;
- braking system;
65.ECO-FRIENDLY AUTOMOBILE BRAKE PAD USING LEMON PEEL

机译：使用柠檬果皮环保汽车刹车片
- 作者：M. M. GIREDARAN;C. THIAGARAJAN
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第1期
- Lemon peel;
- Testing and performance;
- Mechanical characterization amp;
- hand layup method;
66.IMPACT OF SPARK IGNITION TIMING ON POLLUTANTS OF MODIFIED COMBUSTION CHAMBER OF SI ENGINE

机译：火花点火正时对Si发动机修饰燃烧室污染物的影响
- 作者：NAGINI YARRAMSETTY;MADDALI VS MURALIKRISHNA;S. NAGASARADA
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第2期
- CE;
- CCE;
- Pollutants;
- Modified catalytic converter;
- Selective catalytic reduction technique;
- Air injection;
- Optimum ignition timing;
- Recommended ignition timing;
67.STYLISTIC DESIGN ENGINEERING (SDE) FOR AN INNOVATIVE GREEN VEHICLE FOLLOWING QFD AND TRIZ APPLICATIONS

机译：QFD和TRIZ应用程序的创新绿色车辆的风格设计工程（SDE）
- 作者：LEONARDO FRIZZIERO;GIAMPIERO DONNICI;DANIELA FRANCIA;GIANNI CALIGIANA;ANNARITA GADDONI
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第1期
- Design engineering;
- TRIZ;
- Quality distribution method;
- 3D amp;
- hoverboard;
68.PERFORMANCE ANALYSIS OF GASOHOL FUELED SI ENGINE THROUGH SIMULATION SOFTWARE

机译：通过仿真软件对汽油加油SI发动机的性能分析
- 作者：DOLLU BHASKAR;V. NITISH KUMAR;N. C. KAMAL;KARRI SATYANARAYANA REDDY;KAMAROUTHU NAGA UPENDRA
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第2期
- Ethanol;
- Gasoline;
- SI engine;
- Performance;
- Efficiency;
- Emissions;
- Engine simulation software;
69.DESIGN AND FABRICATION OF AUTOMATIC ELECTROMAGNETIC BRAKING SYSTEM

机译：自动电磁制动系统的设计与制造
- 作者：PAVAN AIYAPPA C P;PA VAN CHAITHANYA;NITHYANANDA H S;AMRUTH E
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第2期
- Electromagnet;
- Microcontroller amp;
- ultrasonic sensor;
70.FEA ANALYSIS AND OPTIMIZATION OF TWO-WHEELER BIKE MONO SUSPENSION SYSTEM

机译：两轮车自行车单悬架系统的FEA分析与优化
- 作者：AMARESH KUMAR D;ATMANAND ANIKIVI;SHRIDHAR DESHPANDE
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第1期
- Mono suspension;
- Dampers amp;
- shock absorber;
71.REDUCTION OF POLLUTANTS IN SI ENGINE WITH VARIED IGNITION TIMING

机译：用不同点火正时减少SI发动机污染物
- 作者：YARRAMSETTY NAGINI;MADDALI V. S. MURALI KRISHNA;S. NAGA SARADA
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第2期
- BE;
- Products of exhaust;
- Chamber with oxidizer;
- Spray of air;
- RIT amp;
- OIT;
72.AIRBAGS FOR SAFETY SYSTEM IN AUTOMOBILE ENGINEERING

机译：汽车工程安全系统安全气囊
- 作者：KARTIK BHASIN
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第1期
- History;
- Materials used;
- Working;
- Types amp;
- future scope;
73.WASTE ANALYSIS TO INCREASE PRODUCTIVITY OF METAL PRESS LINE IN MOTORCYCLE DISCBRAKE INDUSTRY USING WORK STUDY AND LEAN MANUFACTURING METHODS

机译：利用工作研究和精益制造方法增加摩托车磁盘工业金属压力线生产率的废物分析
- 作者：DAMSIAR;CHOESNUL JAQIN;HASBULLAH
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第2期
- Productivity;
- Work study;
- Lean manufacturing amp;
- production system;
74.THE EFFECT ON EXHAUST GAS BY ALTERING PRIMARY CIRCUIT VOLTAGE IN SI ENGINE

机译：通过改变Si发动机初级电路电压对废气的影响
- 作者：WON YONG YANG;BYUNGMOYANG;HAENGMUK CHO
- 期刊名称：《International journal of automobile engineering research and development》 | 2020年第2期
- SI engine;
- Exhaust gas;
- Primary circuit voltage amp;
- ignition system;
75.Experimental Investigation of a Inimitable Platform on Heavy Vehicle Chassis

机译：Experimental Investigation of a Inimitable Platform on Heavy Vehicle Chassis
- 作者：Deulgaonkar Vikas Radhakrishna;Matani Ashok Gurmukhdas
- 期刊名称：《International journal of automobile engineering research and development》 | 2013年第3期
- Platform Structure;
- Strain Signal;
- Data Acquisition Systems;
- Tri-Axial Stresses;
- Dynamic Strain;
76.Drag and Lift Reduction on Passenger Car with Rear Spoiler

机译：Drag and Lift Reduction on Passenger Car with Rear Spoiler
- 作者：R. B. Sharma;Ram Bansal
- 期刊名称：《International journal of automobile engineering research and development》 | 2013年第3期
- Aerodynamic Drag;
- Coefficient of Drag;
- Coefficient of Lift;
- Spoiler;
- Wind Tunnel Simulation;
- ANSYS FLUENT;
- Generic Passenger Car;
- CFD;
77.Static and Dynamic Analysis of Connecting Rod of Compressor

机译：Static and Dynamic Analysis of Connecting Rod of Compressor
- 作者：Shriram A. Phad;D. H. Burande
- 期刊名称：《International journal of automobile engineering research and development》 | 2013年第3期
- Connecting Rod;
- FEA Analysis;
- Failure Index;
78.NUMERICAL SIMULATION OF FLOW OF INJECTED ETHANOL AND AIR IN THE INTAKE SYSTEM OF A DUEL FUEL DIRECT INJECTION DIESEL ENGINE USING CFD

机译：NUMERICAL SIMULATION OF FLOW OF INJECTED ETHANOL AND AIR IN THE INTAKE SYSTEM OF A DUEL FUEL DIRECT INJECTION DIESEL ENGINE USING CFD
- 作者：THANGAVEL R;JEGADHEESWARAN S
- 期刊名称：《International journal of automobile engineering research and development》 | 2021年第2期
- IC engines;
- Fuel;
- Ethanol CFD code;
79.DESIGN VALIDATION OF RADIATOR THROUGH FINITE ELEMENT ANALYSIS AND HEAT REJECTION VALIDATION THROUGH EXPERIMENTAL TEST

机译：DESIGN VALIDATION OF RADIATOR THROUGH FINITE ELEMENT ANALYSIS AND HEAT REJECTION VALIDATION THROUGH EXPERIMENTAL TEST
- 作者：PAWAN S. AMRUTKAR;SANGRAM R. PATIL;S. C. SHILWANT
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第2期
- Automotive radiator;
- Heat transfer;
- Simulation;
- Sizing;
- Performance;
80.TEXTILE ENGINEERED MOBILE TECH

机译：TEXTILE ENGINEERED MOBILE TECH
- 作者：ANITHA. B;PRIYANKA. R
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第2期
- Mobiletech;
- Yarn;
- Nylon tyre cord;
- Seat textiles;
- Abrasion resistance;
- UV resistance carpet;
81.CUSTOMIZING VEHICLE CONTROL BY INTEGRATING ELECTRONIC CONTROL UNIT SIGNAL FROM MULTI-POINT VEHICLES

机译：CUSTOMIZING VEHICLE CONTROL BY INTEGRATING ELECTRONIC CONTROL UNIT SIGNAL FROM MULTI-POINT VEHICLES
- 作者：SINDHU LS;MONA P SHERKI;KALYANI A SHIROLEG. SASIKALAANITHA
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第1期
- RFM12B;
- Electronics control unit;
- Voice coded signal;
- FSK ISM;
82.AN ANALYSIS ON DIAGNOSIS OF FAULT DETECTION IN GEARTRANSMISSION SYSTEMS

机译：AN ANALYSIS ON DIAGNOSIS OF FAULT DETECTION IN GEARTRANSMISSION SYSTEMS
- 作者：ONWUKA ONYEBUCHI
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第2期
83.STATIC AND DYNAMIC ANALYSIS OF CONNECTING ROD OF COMPRESSOR

机译：STATIC AND DYNAMIC ANALYSIS OF CONNECTING ROD OF COMPRESSOR
- 作者：SHRIRAM A. PHAD;D. H. BURANDE
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第1期
- Connecting rod;
- FEA analysis failure index;
84.EXPERIMENTAL INVESTIGATION OF DIFFERENT MODELS TO SELECT BEST POSSIBLE DESIGN OF EXHAUST OF THE MANIFOLD

机译：EXPERIMENTAL INVESTIGATION OF DIFFERENT MODELS TO SELECT BEST POSSIBLE DESIGN OF EXHAUST OF THE MANIFOLD
- 作者：K. S. UMESH;V. K. PRAVIN;K. RAJAGOPAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第2期
- Multi-Cylinder engine;
- Exhaust manifold;
- Volumetric efficiency;
- Existing model;
- Modified model;
- Reducer;
- Mechanical efficiency;
- B.S.F.C.;
- Thermal efficiency;
- Fuel economy;
- Optimization;
85.STATIC ANALYSIS OF WELDLESS EXHAUST SYSTEM FITTING BY FEA

机译：STATIC ANALYSIS OF WELDLESS EXHAUST SYSTEM FITTING BY FEA
- 作者：BHADULE A. A;YADAV S. D
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第1期
- Development project;
- Manifold;
- Flange;
- Pipe;
- End shaping weldless FEA;
86.DRAG AND LIFT REDUCTION ON PASSENGER CAR WITH REAR SPOILER

机译：DRAG AND LIFT REDUCTION ON PASSENGER CAR WITH REAR SPOILER
- 作者：R. B. SHARMA;RAM BANSAL
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第1期
- Aerodynamic drag;
- Coefficient of drag;
- Coefficient of lift;
- Spoiler;
- Wind tunnel simulation;
- ANSYS FLUENT;
- Generic passenger car CFD;
87.INDIAN AUTOMOBILE MANUFACTURING INDUSTRY - A STUDY ON THE FINANCIAL PERFORMANCE

机译：INDIAN AUTOMOBILE MANUFACTURING INDUSTRY - A STUDY ON THE FINANCIAL PERFORMANCE
- 作者：RAVI VEERA RAGHAVAN
- 期刊名称：《International journal of automobile engineering research and development》 | 2021年第2期
- Automobile manufacturing industry;
- Financial analysis;
- Ratio analysis Z-score;
88.TRANSSTELLAR JOURNAL PUBLICATIONS AND RESEARCH CONSULTANCY PVT. LTD., (TJPRC)

机译：TRANSSTELLAR JOURNAL PUBLICATIONS AND RESEARCH CONSULTANCY PVT. LTD., (TJPRC)
- 作者：Nilaj N. Deshmukh
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第2期
89.STATISTICAL ANALYSIS ON PERFORMANCE APPRAISAL SYSTEM IN AUTOMOBILE INDUSTRY IN RELATION TO JOB SATISFACTION

机译：STATISTICAL ANALYSIS ON PERFORMANCE APPRAISAL SYSTEM IN AUTOMOBILE INDUSTRY IN RELATION TO JOB SATISFACTION
- 作者：RAMILA DEVI RAM SING;S. VADIVELU
- 期刊名称：《International journal of automobile engineering research and development》 | 2021年第2期
- Human resource management;
- Performance appraisal;
- Job satisfaction Performance management;
90.DESIGN AND ANALYSIS OF A BRAKE CALIPER

机译：DESIGN AND ANALYSIS OF A BRAKE CALIPER
- 作者：DHANANJAY PHAD;TEJAS AUTI;RUCHA JOSHISWAPNIL JADHAVSAGAR DEVASTHALI
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第2期
- FEA;
- Brake caliper;
- Braking system;
- Piston drag;
- ATV;
- Piston retraction;
- Creo 2.0;
- ANSYS workbench 14.0;
- Braking torque;
91.POWER MANAGEMENT SOLUTION BY ANALYSIS AND CONTROL OF 42V/14V DC-DC AUTOMOTIVE BUCK CONVERTER

机译：POWER MANAGEMENT SOLUTION BY ANALYSIS AND CONTROL OF 42V/14V DC-DC AUTOMOTIVE BUCK CONVERTER
- 作者：ANILA T;R. RAJA PRABU;G. UMA
- 期刊名称：《International journal of automobile engineering research and development》 | 2022年第1期
- Automotive;
- DC-to-DC power modules;
- Hybrid electric vehicles (HEV) design;
- Interleaved;
- MatlabSimulink PID control;
92.DESIGN AND OPTIMIZATION OF SIDE IMPACT BEAM OF CAR

机译：DESIGN AND OPTIMIZATION OF SIDE IMPACT BEAM OF CAR
- 作者：PRASAD GHADASHI;VAISHNAVI ALONI;SUSHANT KANWADERUPESH JADHAV
- 期刊名称：《International journal of automobile engineering research and development》 | 2021年第2期
- Side impact beam;
- Hypermesh;
- Three-Point bending test Specific energy absorption;
93.CARBON NANOTUBES AND ITS APPLICATIONS - A REVIEW

机译：CARBON NANOTUBES AND ITS APPLICATIONS - A REVIEW
- 作者：R. VETRIVEL;C. NAVINSELVAKUMAR;P. S. SAMUEL RATNA KUMAR
- 期刊名称：《International journal of automobile engineering research and development》 | 2021年第2期
- Carbon nanotubes;
- Reinforcement;
- Application;
- Composites Incorporated;
94.CFD ANALYSIS OF BACK PRESSURE ON ROYAL ENFIELD EXHAUST PIPE

机译：CFD ANALYSIS OF BACK PRESSURE ON ROYAL ENFIELD EXHAUST PIPE
- 作者：DAMARLAVENKATAVAMSI KRISHNA;ROWTHU CHAKRADHAR;N. S. D. ABHISHEKT. J. V. T. P. SAI KUMARP. N. V. BALA SUBRAMANYAM
- 期刊名称：《International journal of automobile engineering research and development》 | 2021年第2期
- Computational fluid dynamics (CFD);
- Back weight Fumes framework;
95.Simulation of Car Body by Development of Static and Dynamic Analysis

机译：Simulation of Car Body by Development of Static and Dynamic Analysis
- 作者：C. Sadhasivam;S. Jayalakshmi
- 期刊名称：《International journal of automobile engineering research and development》 | 2014年第3期
- Modal Analysis;
- Crash Test Analysis;
- Pro-E;
- 3LDLSDYNA;
- Car Body Design;
- Frequency;
96.Performance Parameters of Ceramic Coated Diesel Engine Fuelled with Cotton Seed Oil in Crude form and Biodiesel form

机译：Performance Parameters of Ceramic Coated Diesel Engine Fuelled with Cotton Seed Oil in Crude form and Biodiesel form
- 作者：D. Srikanth;M. V. S. Murali Krishna;P. UshasriP. V. Krishna Murthy
- 期刊名称：《International journal of automobile engineering research and development》 | 2013年第4期
- Crude Cotton Seed Oil;
- LHR Engine;
- Fuel Performance;
97.Crashworthiness of Automobile in A Vehicle-to-Pole Crash Simulation

机译：Crashworthiness of Automobile in A Vehicle-to-Pole Crash Simulation
- 作者：H. D. Gopalakrishna;Parimesh Panda;Pavan JoisNikhil P N
- 期刊名称：《International journal of automobile engineering research and development》 | 2014年第2期
- Computer Simulation;
- Crashworthiness;
- Explicit Dynamics Code;
- Impact Energy;
- Sensitivity;
98.Studies on Emissions and Combustion Characteristics of Waste Fried Vegetable Oil in Crude Form and Biodiesel of High Grade Low Heat Rejection Diesel Engine

机译：Studies on Emissions and Combustion Characteristics of Waste Fried Vegetable Oil in Crude Form and Biodiesel of High Grade Low Heat Rejection Diesel Engine
- 作者：R. P. CHOWDARY;T. KISHEN KUMAR REDDY;M. V. S. MURALI KRISHNAP. V. K. MURTHY
- 期刊名称：《International journal of automobile engineering research and development》 | 2013年第1期
- CE;
- LHR Engine;
- Alternate Fuels;
- Exhaust Emissions;
- Combustion Characteristics;
99.Application of a New Modified Parametric Algebraic Model for Magnetorheological Damper in Vehicle Semi-Active Suspension System

机译：Application of a New Modified Parametric Algebraic Model for Magnetorheological Damper in Vehicle Semi-Active Suspension System
- 作者：Loganathan Balamurugan;Jeyaraj Jancirani
- 期刊名称：《International journal of automobile engineering research and development》 | 2013年第1期
100.Vehicle Lock by Power Steering

机译：Vehicle Lock by Power Steering
- 作者：Vikas Sharma;R.B.Sharma
- 期刊名称：《International journal of automobile engineering research and development》 | 2013年第1期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号