首页>外文期刊>经济>Advanced Manufacturing: Polymer & Composites Science

Advanced Manufacturing: Polymer & Composites Science

中文名称：先进制造业:聚合物,科学

ISSN：-
出版周期：-

发文量：97

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Electric field induced alignment of multiwalled carbon nanotubes in polymers and multiscale composites

机译：电场诱导聚合物和多尺度复合材料中多壁碳纳米管的排列
- 作者：Maxime Arguin;Frédéric Sirois;Daniel Therriault
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第1期
2.Anti-symmetric laminates for improved consolidation and reduced warp of tapered C-sections

机译：抗对称层压板，可改善固结并减少锥形C型材的翘曲
- 作者：T. A. Fletcher;R. Butler;T. J. Dodwell
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第2期
3.Compaction behavior of continuous carbon fiber tows: an experimental analysis

机译：连续碳纤维丝束的压实特性：实验分析
- 作者：D. Kastanis;H. Steiner;E. Fauster;R. Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第3期
4.Hand layup: understanding the manual process

机译：上手：了解手动过程
- 作者：M. Elkington;D. Bloom;C. Ward;A. Chatzimichali;K. Potter
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第3期
5.Advanced Manufacturing: Polymer & Composites Science – The Second Issue

机译：先进制造：聚合物与复合材料科学–第二期
- 作者：Dr Ali Yousefpour;Professor Bronwyn Fox;Professor Alma Hodzic
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第2期
6.Processing and characterization of polyethylene-based composites

机译：聚乙烯基复合材料的加工和表征
- 作者：P. Noorunnisa Khanam;Mariam Al Ali AlMaadeed
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第2期
7.Advanced Manufacturing: Polymer & Composites Science–The First Issue

机译：先进制造：聚合物与复合材料科学–第一期
- 作者：Professor Alma Hodzic;Dr Ali Yousefpour;Professor Bronwyn Fox
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第1期
8.Influence of manufacturing induced defects on damage initiation and propagation in carbon/epoxy NCF laminates

机译：制造引起的缺陷对碳/环氧树脂NCF层压板中损伤引发和扩散的影响
- 作者：P. A. Carraro;L. Maragoni;M. Quaresimin
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第1期
9.Effect of machining coolant on integrity of CFRP composites

机译：加工冷却液对CFRP复合材料完整性的影响
- 作者：J. Turner;R. J. Scaife;H. M. El-Dessouky
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第1期
10.Studying effects of preshearing on hand layup

机译：研究预剪对上叠的影响
- 作者：Michael Elkington;Carwyn Ward;Anna Chatzimichali;Kevin Potter
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第2期
11.Limit of adhesion coefficient measurement of a unidirectional carbon fabric

机译：单向碳纤维织物粘合系数测量的极限
- 作者：Hugo Aimé;Sébastien Comas-Cardona;Christophe Binetruy;Julia Schell;Marie-France Lacrampe;Mylène Deléglise-Lagardère
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第3期
12.Stabilizing textile preforms by means of liquid resin print: a feasibility study

机译：通过液态树脂印花稳定纺织品预制件的可行性研究
- 作者：Dmitry S. Ivanov;James A. P. White;William Hendry;Yusuf Mahadik;Vivien Minett;Harshit Patel;Carwyn Ward
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第1期
13.A simplified damage prediction framework for milling of unidirectional carbon fiber-reinforced plastics

机译：铣削单向碳纤维增强塑料的简化损伤预测框架
- 作者：F. Islam;J. Ramkumar;A.S. Milani
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第4期
14.Investigation into the mechanical properties of thermoplastic composites containing holes machined by a thermally-assisted piercing (TAP) process

机译：研究含热刺穿（TAP）工艺加工的含孔热塑性复合材料的机械性能
- 作者：N.W.A. Brown;C.M. Worrall;S.L. Ogin;P.A. Smith
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第4期
15.Multiscale modeling of combined deterministic and stochastic fabric non-uniformity for realistic resin injection simulation

机译：确定性和随机性织物不均匀性的多尺度建模，用于逼真的树脂注射模拟
- 作者：A. Endruweit;X. Zeng;A. C. Long
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第1期
16.Direct electrical cure of carbon fiber composites

机译：碳纤维复合材料的直接电固化
- 作者：Simon A. Hayes;Austin D. Lafferty;Gader Altinkurt;Peter R. Wilson;Matthew Collinson;P. Duchene
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第2期
17.Laser-powered tape placement process – simulation and optimization

机译：激光供电的胶带放置过程–仿真和优化
- 作者：Dennis Maurer;Peter Mitschang
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第3期
18.Exploring the discrete tools used by laminators in composites manufacturing: application of novel concept

机译：探索复合材料制造中层压机使用的离散工具：新概念的应用
- 作者：H.V. Jones;A.P. Chatzimichali;R. Middleton;K.D. Potter;C. Ward
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第4期
19.On the evolution of the distribution of entrapped air at the tool/first ply interf‘ace during lay-up and debulk

机译：在铺放和散装过程中在工具/第一层界面处截留的空气的分布演变
- 作者：L. D. Bloom;M. A. Napper;C. Ward;K. Potter
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第1期
20.Molecular dynamics study on effects of aspect ratio of carbon nanotubes in thermosetting epoxy based nanocomposites including modeling of crosslinking process

机译：碳纳米管长径比对热固性环氧基纳米复合材料影响的分子动力学研究，包括交联过程建模
- 作者：Jung-Hoon Sul*;B. Gangadhara Prusty;Donald W. Kelly
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第2期
21.Industrial process of copolymerization and terpolymerization of acrylonitrile: experimental approach and statistic modeling

机译：丙烯腈共聚和三聚的工业过程：实验方法和统计模型
- 作者：J. M. F. Marlet;E. Bittencourt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第3期
22.Investigation of the mechanical properties and fracture morphology of glass ceramic fibers

机译：玻璃陶瓷纤维的力学性能和断裂形态研究
- 作者：Z. Shamsudin;A. Hodzic;C. Soutis;R. J. Hand;I. P. Bond;P. J. Howard;I. Szkoda
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2015年第2期
23.Review of cost estimation: methods and models for aerospace composite manufacturing

机译：成本估算审查：航空航天复合材料制造的方法和模型
- 作者：Ch. Hueber;K. Horejsi;R. Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第1期
24.Experimental verification of Re-Fib method for recycling fibres from composites

机译：Re-Fib方法从复合材料中回收纤维的实验验证
- 作者：Guan Gong;Kurt Olofsson;Birgitha Nystr?m;Magdalena Juntikka;Henrik Oxfall;Karin Lindqvist
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第1期
25.Analysis of pultrusion process for thick glass/polyester composites: transverse shear stress formations

机译：厚玻璃/聚酯复合材料的拉挤成型过程分析：横向剪切应力形成
- 作者：Ismet Baran
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第4期
26.Experimental investigation of delamination and surface roughness in the drilling of GFRP composite material with different drills

机译：不同钻头钻进GFRP复合材料时分层和表面粗糙度的实验研究
- 作者：Dhiraj Kumar;K. K. Singh;Redouane Zitoune
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第2期
27.Effect of two types of graphene nanoplatelets on the physico–mechanical properties of linear low–density polyethylene composites

机译：两种石墨烯纳米片对线性低密度聚乙烯复合材料物理力学性能的影响
- 作者：P. Noorunnisa Khanam;Mariam A. AlMaadeed;M. Ouederni;Beatriz Mayoral;Andrew Hamilton;Dan Sun
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第2期
28.Identification of the effect of typical curvatures encountered in RTM parts on localized permeability of fibrous preforms

机译：确定在RTM零件中遇到的典型曲率对纤维预成型件局部渗透率的影响
- 作者：Spiridon Konstantopoulos;Christian Hueber;Elisabeth Mühlbachler;Ralf Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第2期
29.Study on the validation of ring filament winding methods for unidirectional preform ply manufacturing

机译：环形纤维缠绕方法在单向预成型坯层制造中的有效性研究
- 作者：F. A. Finkenwerder;M. Geistbeck;P. Middendorf
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第4期
30.Evolution of viscoelastic behavior of a curing LY5052 epoxy resin in the glassy state

机译：固化态LY5052环氧树脂在玻璃态下的粘弹性行为演变
- 作者：Sibin Saseendran;Maciej Wysocki;Janis Varna
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第2期
31.A dry aligning method of discontinuous carbon fibers and improvement of mechanical properties of discontinuous fiber composites

机译：不连续碳纤维的干法定型及不连续纤维复合材料力学性能的改善
- 作者：Takushi Miyake;Satoshi Imaeda
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第4期
32.Zero-flow: a novel approach to continuous ultrasonic welding of CF/PPS thermoplastic composite plates

机译：零流量：CF / PPS热塑性复合板连续超声焊接的新方法
- 作者：Frank Senders;Martijn van Beurden;Genevieve Palardy;Irene F. Villegas
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第4期
33.Maximizing the out-of-plane-permeability of preforms manufactured by dry fiber placement

机译：最大化通过干纤维铺放制造的瓶坯的面外渗透性
- 作者：Oliver Rimmel;David Becker;Peter Mitschang
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第4期
34.Holistic modeling of composites manufacturing using poromechanics

机译：使用poromechanics进行复合材料制造的整体建模
- 作者：Mohammad S. Rouhi;Maciej Wysocki;Ragnar Larsson
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第1期
35.An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking study

机译：基于超声传感器的面外磁导率测量的可重复性评估：基准研究
- 作者：David Becker;Harald Gr?ssing;Spiridon Konstantopoulos;Ewald Fauster;Peter Mitschang;Ralf Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2016年第1期
36.A three-dimensional transient model for heat transfer in thermoplastic composites during continuous resistance welding

机译：连续电阻焊接中热塑性复合材料传热的三维瞬态模型
- 作者：Imad Zammar;M. Saiful Huq;Iraj Mantegh;Ali Yousefpour;Mojtaba Ahmadi
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第1期
37.A review of composite product data interoperability and product life-cycle management challenges in the composites industry

机译：复合材料行业中复合产品数据互操作性和产品生命周期管理挑战的回顾
- 作者：Alison J. McMillan;Norman Swindells;Edward Archer;Alistair McIlhagger;Anna Sung;Kelvin Leong;Rhys Jones
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第4期
38.Heating rate effects on thermal analysis measurement of Tg in composite materials

机译：升温速率对复合材料中Tg热分析测量的影响
- 作者：Ana X. H. Yong;Graham D. Sims;Samuel J. P. Gnaniah;Stephen L. Ogin;Paul A. Smith
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第2期
39.Corrugated composites: production-integrated quality assurance in carbon fiber reinforced thermoplastic sine wave beam production

机译：波纹复合材料：碳纤维增强热塑性正弦波光束生产中的生产综合质量保证
- 作者：Frederic J. C. Fischer;Matthias Beyrle;Arthur-Hans Thellmann;Manuel Endrass;Thomas Stefani;Tobias Gerngross;Michael Kupke
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第1期
40.Resource-friendly carbon fiber composites: combining production waste with virgin feedstock

机译：资源友好型碳纤维复合材料：将生产废料与原始原料结合在一起
- 作者：James Kratz;Yi Shane Low;Ben Fox
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第4期
41.Online monitoring of surface cracks and delaminations in carbon fiber/epoxy composites using silver nanoparticle based ink

机译：使用银纳米颗粒基油墨在线监测碳纤维/环氧树脂复合材料中的表面裂纹和分层
- 作者：Till Augustin;Danny Grunert;Hauke H. Langner;Vico Haverkamp;Bodo Fiedler
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第3期
42.Study and characterization of LDPE/Polyolefin elastomer and LDPE/EPDM blend: effect of chlorinated water on blend performance

机译：LDPE /聚烯烃弹性体和LDPE / EPDM共混物的研究与表征：氯化水对共混物性能的影响
- 作者：Nikesh B. Samarth;Prakash A. Mahanwar
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第2期
43.Characterizing short-fiber-reinforced composites produced using additive manufacturing

机译：表征使用增材制造生产的短纤维增强复合材料
- 作者：Marcus Ivey;Garrett W. Melenka;Jason. P. Carey;Cagri Ayranci
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第3期
44.Influence of process pressures on filling behavior of tubular fabrics in bladder-assisted resin transfer molding

机译：工艺压力对膀胱辅助树脂传递模塑中管状织物填充行为的影响
- 作者：Christian Schillfahrt;Ewald Fauster;Ralf Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第4期
45.Parametric optimization of the processing of all-cellulose composite laminae

机译：全纤维素复合层板加工的参数优化
- 作者：M. Mat Salleh;K. Magniez;S. Pang;J. W. Dormanns;M. P. Staiger
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第2期
46.Publisher’s note

机译：发布者的笔记
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第1期
47.The manufacture of honeycomb cores using Fused Deposition Modeling

机译：使用熔融沉积建模制造蜂窝芯
- 作者：David Pollard;C. Ward;G. Herrmann;J. Etches
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第1期
48.In-situ simultaneous measurement of strain and temperature in automated fiber placement (AFP) using optical fiber Bragg grating (FBG) sensors

机译：使用光纤布拉格光栅（FBG）传感器现场同时测量自动光纤放置（AFP）中的应变和温度
- 作者：Ebrahim Oromiehie;B. Gangadhara Prusty;Paul Compston;Ginu Rajan
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第2期
49.Cure-state dependent viscoelastic Poisson’s ratio of LY5052 epoxy resin

机译：LY5052环氧树脂的固化态粘弹性泊松比
- 作者：Sibin Saseendran;Maciej Wysocki;Janis Varna
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第3期
50.Factors affecting the properties of composites made by 4D printing (moldless composites manufacturing)

机译：影响4D打印制成的复合材料性能的因素（无模复合材料制造）
- 作者：Suong Van Hoa
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第3期
51.The advanced ply placement process – an innovative direct 3D placement technology for plies and tapes

机译：先进的层放置工艺–用于层和胶带的创新性直接3D放置技术
- 作者：Marko Szcesny;Frieder Heieck;Stefan Carosella;Peter Middendorf;Harald Sehrsch?n;Michael Schneiderbauer
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2017年第1期
52.Path calculation, technology and opportunities in dry fiber winding: a review

机译：干纤维缠绕的路径计算，技术和机会：综述
- 作者：Tasdeeq Sofi;Stefan Neunkirchen;Ralf Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2018年第3期
53.Effect of in situ treatment on the quality of flat thermoplastic composite plates made by automated fiber placement (AFP)

机译：原位处理对通过自动纤维铺放（AFP）制成的扁平热塑性复合板质量的影响
- 作者：F. Shadmehri;S. V. Hoa;J. Fortin-Simpson;H. Ghayoor
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2018年第2期
54.Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments

机译：通过径向流实验对面层渗透率表征进行流锋数据的鲁棒评估
- 作者：Ewald Fauster;David C. Berg;David May;Yannick Bl??l;Ralf Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2018年第1期
55.Development and application of a quality control and property assurance methodology for reclaimed carbon fibers based on the HiPerDiF (High Performance Discontinuous Fibre) method and interlaminated hybrid specimens

机译：基于HiPerDiF（高性能不连续纤维）方法和层间混合样品的再生碳纤维质量控制和性能保证方法的开发和应用
- 作者：M. L. Longana;H. Yu;I. Hamerton;K. D. Potter
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2018年第2期
56.Compression molding of reused in-process waste – effects of material and process factors

机译：重复利用的过程中废弃物的压缩成型–材料和工艺因素的影响
- 作者：M.-S. Wu;T. Centea;S. R. Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2018年第1期
57.Material selection for automated dry fiber placement using the analytical hierarchy process

机译：使用层次分析法自动干燥纤维放置的材料选择
- 作者：Laura Veldenz;Mattia Di Francesco;Peter Giddings;Byung Chul Kim;Kevin Potter
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2018年第4期
- Carbon compositesanalytical hierarchy processfiber reinforced plasticmaterial selectionautomated dry fiber placementchain of interactionsautomated manufacturingmulti-criteria decision making;
58.Optical thermal model for LED heating in thermoset-automated fiber placement

机译：热固性自动光纤放置中用于LED加热的光学热模型
- 作者：Tilman Orth;Michael Krahl;Patricia Parlevliet;Niels Modler
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2018年第3期
59.Effect of the water absorptive capacity of reinforcing fibers on the process ability, morphology, and performance characteristics of composites produced from polyfurfuryl alcohol

机译：增强纤维的吸水能力对由聚糠醇制成的复合材料的加工能力，形态和性能特性的影响
- 作者：Katharina Resch-Fauster;Jovana D?alto;Andrea Anusic;Peter Mitschang
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2018年第1期
60.Co-consolidation of CF/PEEK tape-preforms and CF/PEEK organo sheets to manufacture reinforcements in stamp-forming process

机译：CF / PEEK胶带预成型件和CF / PEEK有机片材的共固结，以制造冲压成型过程中的增强材料
- 作者：Julian Weber;Jens Schlimbach
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第4期
- Co-consolidationcarbon fiber/polyether ether ketonestamp-formingfusion bondingdirect bondinginterlaminar fracture toughness;
61.Uncertainty propagation and sensitivity analysis in composite manufacturing cost estimation: ALPHA-framework and cost tool development

机译：复合材料制造成本估算中的不确定性传播和敏感性分析：ALPHA框架和成本工具开发
- 作者：Christian Hueber;Nikolaus Schwingshandl;Ralf Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第2期
- Cost estimationsensitivity analysisMonte Carlo simulationcomposite processingaerospace manufacturing;
62.Suitability of thickness change as process control parameter for induction welding of steel/TP-FRPC joints

机译：厚度变化作为钢/ TP-FRPC接头感应焊接工艺控制参数的适用性
- 作者：S. Weidmann;M. Hümbert;P. Mitschang
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第2期
- Induction weldinglap shear strengthhybrid joininginfluence thickness changeprocess controlthickness change curvesurface treatment;
63.Real-time quantification of network growth of epoxy/diamine thermosets as a function of cure protocol

机译：实时定量环氧/二胺热固性树脂网络固化反应的函数
- 作者：Andrew P. Janisse;Jeffrey S. Wiggins
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第1期
- Glassy thermosetsepoxy/amine networkscure path dependencereal-time FTIR;
64.A recyclable epoxy for composite wind turbine blades

机译：用于复合材料风力涡轮机叶片的可回收环氧树脂
- 作者：Ming-Sung Wu;Bo Cheng Jin;Xin Li;Steven Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第3期
- Recyclingprocessingepoxyglass fiberthermosetcompositesmechanical propertiesvacuum infusiondissolution;
65.Delivering interlaminar reinforcement in composites through electrospun nanofibres

机译：通过电纺纳米纤维在复合材料中提供层间增强
- 作者：T. R. Pozegic;S. G. King;M. Fotouhi;V. Stolojan;S. R. P. Silva;I. Hamerton
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第4期
- Interlaminarelectrospinningnanofibresmode Imode IIPA-66PSUPEI;
66.A reference specimen for compaction tests of fiber reinforcements

机译：纤维增强材料压实测试的参考样品
- 作者：David May;Florian Kühn;Matt Etchells;Ewald Fauster;Andreas Endruweit;Cristian Lira
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第4期
- Liquid composite moldingcompactiontextilesfiber structurestesting;
67.Multi-objective optimization of Resin Infusion

机译：树脂灌注的多目标优化
- 作者：G. Struzziero;A. A. Skordos
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第1期
- Resin Infusionmulti-objective optimizationfinite elementscomposites manufacturingthermosetting resinprocess simulationflow through porous mediaviscosity;
68.Metrological determination of inhomogeneous hydrodynamic compaction during unsaturated out-of-plane permeability measurement of technical textiles

机译：工业纺织品不饱和面外渗透率测量过程中非均质流体动力压实的计量确定
- 作者：B. Willenbacher;D. May;P. Mitschang
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第2期
- Liquid composite moldingpermeabilityhydrodynamiccompactionout-of-plane;
69.Dry fiber placement of carbon/steel fiber hybrid preforms for multifunctional composites

机译：碳/钢纤维混合预成型件用于多功能复合材料的干纤维铺放
- 作者：Florian Kühn;Jan Rehra;David May;Sebastian Schmeer;Peter Mitschang
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第1期
- Dry fiber placementsteel fibershybrid laminateCFRPC;
70.Fabrication of complex 3D composites by fusing automated fiber placement (AFP) and additive manufacturing (AM) technologies

机译：通过融合自动纤维铺放（AFP）和增材制造（AM）技术来制造复杂的3D复合材料
- 作者：Felix Raspall;Rajkumar Velu;Nahaad Mohammed Vaheed
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第1期
- Robot fabricationautomated fiber placementadditive manufacturingpolymer compositesdesign methodologycarbon fiber reinforcementtoolpath simulation3D printing;
71.The effects of conductive nano fillers alignment on the dielectric properties of copolymer matrix

机译：导电纳米填料取向对共聚物基体介电性能的影响
- 作者：Md Habibur Rahaman;Usman Yaqoob;Hyeon Cheol Kim
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第1期
- rGOcopolymerconductive fillerfillers alignmentcrystallinity;
72.Heat transfer analysis of automated fiber placement of thermoplastic composites using a hot gas torch

机译：使用热气炬对热塑性复合材料进行自动纤维铺放的传热分析
- 作者：Omid Aghababaei Tafreshi;Suong Van Hoa;Farjad Shadmehri;Duc Minh Hoang;Daniel Rosca
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第4期
- Thermoplastic compositesautomated fiber placementhot gas torchthermal analysis;
73.Effects of defects on laminate quality and mechanical performance in thermoplastic Automated Fiber Placement-based process chains

机译：缺陷对热塑性自动纤维铺装工艺链中层压材料质量和机械性能的影响
- 作者：Thomas Zenker;Fabian Bruckner;Klaus Drechsler
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第4期
- Automated fiber placementthermoplasticdefectsconsolidationmechanical testingstamp formingundulationsdigital image correlation;
74.Generation of feasible gripper trajectories in automated composite draping by means of optimization

机译：通过优化在自动化复合材料覆盖中生成可行的抓取器轨迹
- 作者：Christian Krogh;James A. Sherwood;Johnny Jakobsen
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第4期
- Woven prepregdrapingtrajectory optimizationoffline motion planningautomation;
75.A novel route for volume manufacturing of hollow braided composite beam structures

机译：中空编织复合梁结构批量生产的新途径
- 作者：Anubhav Singh;Neil Reynolds;Craig R. Carnegie;Christopher Micallef;Elspeth M. Keating;James Winnett;Alastair E. Barnett;Steve K. Barbour;Darren J. Hughes
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第4期
- Braidingbladder inflation mouldingcommingled yarnthermoplasticvariothermal toolingmechanical testinghigh volume;
76.Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: a review of challenges and solutions

机译：现实世界中纤维增强聚合物复合材料的液体复合材料模塑成型再现性：挑战和解决方案的回顾
- 作者：Spiridon Konstantopoulos;Christian Hueber;Ioannis Antoniadis;John Summerscales;Ralf Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2019年第3期
- Fiber-reinforced polymeric compositescomposites manufacturingliquid composite moldingdefectsuncertaintiesprocess monitoring and controlpermeabilitycost estimation;
77.Viscoelastic model with complex rheological behavior (VisCoR): incremental formulation

机译：复杂流变行为的粘弹性模型（VISCOR）：增量制剂
- 作者：Sibin Saseendran;Daniel Berglund;Janis Varna
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第1期
- Process modelingviscoelasticitythermo-rheological complexityshift factors;
78.Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

机译：单次混合rtm零件的流量控制质量优化
- 作者：Patrick Hergan;Ewald Fauster;Daniela Perkonigg;Gerald Pinter;Ralf Schledjewski
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第1期
- Resin transfer mouldinghybrid materialsmodel-based processingvoid reductioninterface strength;
79.Effects of debulk temperature on air evacuation during vacuum bag-only prepreg processing

机译：刚填充袋预浸料加工期间防透底温度对空气疏散的影响
- 作者：Wei Hu;Steven Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第1期
- Vacuum bag-only (VBO) prepregheated debulkpermeabilityair evacuation;
80.Use of recycled carbon staple fibers in an advanced thermoforming process and analysis of its crash performance

机译：在先进的热成型过程中使用再生碳短纤维纤维和其碰撞性能分析
- 作者：Florian Mischo;Christian Goergen;Sebastian Schmeer;Peter Mitschang
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第1期
- Thermoplastic compositesenergy absorptioncrash absorberthermoformingrecycled carbon fibercomposite manufacturing;
81.Effective thermal conductivity of 3D-printed continuous fiber polymer composites

机译：3D印刷连续纤维聚合物复合材料的有效导热系数
- 作者：Yehia Ibrahim;Ahmed Elkholy;Jonathon S. Schofield;Garrett W. Melenka;Roger Kempers
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第1期
- Additive manufacturing3D-printed continuous fiber reinforced polymer compositesfused filament fabricationthermal conductivity enhancementheat exchangers;
82.Air evacuation and resin impregnation in semi-pregs: effects of feature dimensions

机译：半导体中的空气抽空和树脂浸渍：特征尺寸的影响
- 作者：Sarah G. K. Schechter;Lessa K. Grunenfelder;Steven R. Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第2期
- Prepregpolymer matrix compositesporositydefectscarbon fiberepoxyout of autoclave processingvacuum bag only;
83.Strategies for swift automated pick-and-place operations of multiple large-sized layers of reinforcement - a critical review

机译：迅速自动化拾取运算的策略 - 多种大型加固层 - 一个关键评论
- 作者：Chantal M. de Zeeuw;Dani?l M. J. Peeters;Otto K. Bergsma;Rinze Benedictus
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第2期
- Pick-and-placeautomationlay-upfabrics/textilesup-scalingply handling strategiesgripping strategiesreview;
84.Design and application of discontinuous resin distribution patterns for semi-pregs

机译：半射精不连续树脂分布图的设计与应用
- 作者：Sarah G. K. Schechter;Lessa K. Grunenfelder;Steven R. Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第2期
- Prepregpolymer matrix compositesporositydefectsout of autoclavevacuum bag only;
85.Determination of convective heat transfer coefficient for automated fiber placement (AFP) for thermoplastic composites using hot gas torch

机译：热气焊炬热塑性复合材料自动纤维放置（AFP）对流传热系数的测定
- 作者：Omid Aghababaei Tafreshi;Suong Van Hoa;Farjad Shadmehri;Duc Minh Hoang;Daniel Rosca
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第2期
- Convective heat transfer coefficientautomated fiber placementthermoplastic compositesimpinging jet heat transfer;
86.Path-dependent bond-line evolution in equilibrated core honeycomb sandwich structures

机译：平衡核心蜂窝夹层结构中的路径依赖性粘合线演变
- 作者：Daniel Zebrine;Mark Anders;Timotei Centea;Steven Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第3期
- Sandwich structureshoneycomb coreepoxy prepregsthermoset adhesivesdefect formationcure behaviorsprocess monitoringautoclave processing;
87.Experimental and numerical investigations of pressure-controlled resin transfer molding (PC-RTM)

机译：压力控制树脂转移成型（PC-RTM）的实验性和数值研究
- 作者：Julian Seuffert;Philipp Rosenberg;Luise K?rger;Frank Henning;Martin Heinz Kothmann;Günter Deinzer
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第3期
- Resin transfer moldingprocess developmentprocess simulationmold filling;
88.Effective cure cycle development via flow optimization and advanced cure environments

机译：通过流量优化和先进的固化环境有效的固化循环开发
- 作者：D. Kim;S. R. Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第3期
- Prepregout-timeout-of-autoclave (OoA)rheologyviscosity;
89.Use of experimental design to obtain polymeric microfibers with carbon nanotubes

机译：使用实验设计与碳纳米管获得聚合物微纤维
- 作者：Andressa Giombelli Rosenberger;Janice Caroline Hardt;Douglas Cardoso Dragunski;Franciele Fernanda da Silva;Paulo Rodrigo Stival Bittencourt;Reinaldo Aparecido Bariccatti;Edvani Curti Muniz;Marcia Regina Sim?es;Josiane Caetano
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第3期
- Electrospinningnanotechnologycompositemicrofiber;
90.Permeability of co-cured honeycomb sandwich skins effect of gas transport during processing

机译：共固化蜂窝夹层的渗透性在加工过程中燃气运输的效应
- 作者：Trisha Palit;Timotei Centea;Mark Anders;Daniel Zebrine;Steven Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第3期
- Co-curehoneycombprepregpermeabilitysandwich structurescomposites manufacturing;
91.Towards automation of wind energy rotor blade production: a review of challenges and application examples

机译：迈向风能转子叶片生产自动化：挑战和应用例子综述
- 作者：Jan-Hendrik Ohlendorf;Marvin Richrath;Jan Franke;Michael Brink;Klaus-Dieter Thoben
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第4期
- Fabrics/textilespreformautomationlay-up (manual/automated);
92.An investigation of in-situ AFP process parameters using CF/LM-PAEK

机译：使用CF / LM-PAEK对原位AFP过程参数的调查
- 作者：Ines Schiel;Lukas Raps;Ashley R. Chadwick;Isabelle Schmidt;Manuel Simone;Sebastian Nowotny
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第4期
- Automated placement technologiesin-situ manufacturingautomated fiber placement (AFP)differential scanning calorimetry (DSC)single lap shear (SLS) testCF/LM-PAEK;
93.In situ resin age assessment using dielectric analysis and resin cure map for efficient vacuum infusion

机译：使用介电分析和树脂固化图的原位树脂年龄评估进行有效的真空输注
- 作者：Jung Hwan Shin;Steven Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第4期
- Cure behaviorprocess simulationprocess monitoringvacuum infusion;
94.Fast cure of stable semi-pregs via VBO cure

机译：通过VBO治疗快速固化稳定半法
- 作者：David B. Bender;Timotei Centea;Steven Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第4期
- Semi-prepreg compositesout-of-autoclavefast cure modelreaction inhibitionincomplete curing;
95.Optimization of the laser-assisted tape winding process using an inverse kinematic-optical-thermal model

机译：使用逆运动 - 光学 - 热模型进行激光辅助磁带绕组工艺的优化
- 作者：S. M. Amin Hosseini;Frank Esselink;Ismet Baran;Martin van Drongelen;Remko Akkerman
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第4期
- Inverse modeloptimizationprocess modellaserlaser-assisted tape winding;
96.Process robustness and defect formation mechanisms in unidirectional semipreg

机译：单向半导体中的过程鲁棒性和缺陷形成机制
- 作者：William T. Edwards;Patricio Martinez;Steven R. Nutt
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2020年第4期
- Prepregsemipregthrough-thickness permeabilityrobust manufacturingprepreg format designdefect formation mechanism;
97.Increasing the performance of continuous compression moulding by local pressure adaption

机译：通过局部压力适应提高连续压缩成型的性能
- 作者：Florian Piott;Andreas Kr?mer;André Lück;Leo Hoffmann;Peter Mitschang;Dietmar Drummer
- 期刊名称：《Advanced Manufacturing: Polymer & Composites Science》 | 2021年第1期
- Continuous compression mouldingorganic sheetimpregnationsolidification;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号