首页>外文期刊>一般工业技术>Materials Science Research International

Materials Science Research International

中文名称：材料科学研究国际

ISSN：1341-1683
出版周期：Monthly

发文量：44

期刊论文

热门论文

年度选择

2003
- 第1期
- 第2期
- 第3期
- 第4期
2001
- 第1期
1999
- 第4期

更多>>

全选（0）

1.Thermal Aging Embrittlement of Tungsten-Alloyed 9%Cr Ferritic Steels and Electrochemical Evaluation

机译：钨合金9％Cr铁素体钢的热时效脆化及电化学评价
- 作者：Shin-ichi KOMAZAKI;Shigeo KISHI;Tetsuo SHOJI;Hideki CHIBA;Koshi SUZUKI
- 期刊名称：《Materials Science Research International》 | 2003年第1期
2.High Temperature Fatigue Deformation Measurement of Ceramics Thermally Sprayed SUS304 Steel Using an ESPI System

机译：使用ESPI系统测量陶瓷热喷涂SUS304钢的高温疲劳变形
- 作者：Rongguang WANG;Tarou TOKUDA;Mitsuo KIDO
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- alumina ceramics;
- thermally spraying coating;
- electronic speckle pattern interferometry (ESPI);
- fatigue;
- strain;
- deformation;
3.Estimated and Evaluated Residual Stress by Vickers Indentation in Several Structural Ceramics

机译：通过维氏压痕估计和评估的残余应力在几种结构陶瓷中
- 作者：Tarou TOKUDA;Mitsuo KIDO;Rongguang WANG;Takahiro DOTE
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- ceramics;
- residual stress;
- fracture toughness;
- vickers indentation;
- X-ray diffraction;
4.Creep-Fatigue Crack Growth Behavior of Low Alloy Steel under Displacement-Controlled Conditions

机译：低合金钢在位移控制条件下的蠕变疲劳裂纹扩展行为
- 作者：Hironori KINO;Toshihide IGARI;Takumi TOKIYOSHI;Fumiko KAWASHIMA;Masaaki FUJITA;Tetsuo TERAMAE;Shin YOSHINO
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- creep-fatigue crack growth;
- stress relaxation;
- 2 1/4Cr-1Mo steel;
- fully plastic solution;
- J-integral;
- fracture mechanics;
- life prediction;
5.Creep Fracture Analysis of W Strengthened High Cr Steel Weldment

机译：W强化高Cr钢焊缝的蠕变断裂分析
- 作者：Masaaki TABUCHI;Masakazu MATSUI;Takashi WATANABE;Hiromichi HONGO;Kiyoshi KUBO;Fujio ABE
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- 11Cr-0.4Mo-2W steel;
- simulated HAZ;
- welded joint;
- type Ⅳ crack;
- creep crack growth;
- FEM;
- computational simulation;
6.Creep and Fatigue Properties of Newly Developed Ferritic Heat-Resisting Steels for Ultra Super Critical (USC) Power Plants

机译：新开发的超超临界（USC）电厂铁素体耐热钢的蠕变和疲劳性能
- 作者：Megumi KIMURA;Kazuo KOBAYASHI;Koji YAMAGUCHI
- 期刊名称：《Materials Science Research International》 | 2003年第1期
7.Compressive Strain Hold Effect on High Temperature Low-Cycle Fatigue Crack Growth in Superalloys

机译：压缩应变保持效应对高温合金高温低循环疲劳裂纹扩展的影响
- 作者：Nobuhiro ISOBE;Shigeo SAKURAI
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- crack growth;
- high temperature fatigue;
- superalloy;
- oxidation;
- compressive strain hold;
- mean stress;
8.Application of Fractal Analysis to Quantitative Evaluation of Three-dimensional Shape Irregularity of Concrete Aggregates

机译：分形分析在混凝土骨料三维形状不规则性定量评估中的应用
- 作者：Masashi FUJIKAWA;Tatsuo SAKAI;Shigemasa AOKI
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- fractal analysis;
- concrete aggregates;
- shape irregularity;
- curved surface;
- multifacets;
9.Electrochemical Evaluation of Damage Level to Weight Bearing Surface of Metal Head Joint Prosthesis

机译：金属头关节假体对承重表面损伤程度的电化学评估
- 作者：Masafumi MORITA;Eiko KONDO;Tomohisa YAMADA;Tadashi SASADA
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- passivation;
- arthroplasty;
- metallosis;
- corrosion;
- toxicity;
- biocompatibility;
- titanium alloy;
10.The Potential for the Improvement of High Performance Thermal Barrier Coatings

机译：改进高性能热障涂层的潜力
- 作者：Masakazu OKAZAKI
- 期刊名称：《Materials Science Research International》 | 2003年第1期
11.Neutron Diffraction Study of Thermal Residual Strain in Three Layered Materials Made by Self-propagating High-temperature Synthesis

机译：自蔓延高温合成三层材料中热残余应变的中子衍射研究
- 作者：Kazuko INOUE;Tetsuya TSUJIKAMI;Manshi OHYANAGI;Mitsuhiro KAWAGAI;Masaaki KOMATSU;Masaki SUGIMOTO;Nobuaki MINAKAWA;Atsushi MORIAI;Takashi KAMIYAMA;Kenichi OIKAWA
- 期刊名称：《Materials Science Research International》 | 2003年第1期
12.Undesirable Effect of Local Cellular Transformation in Microstructurally-Controlled Ni-base Superalloys Subjected to Previous Damage on High Temperature Fatigue Strength and the Prevention: - For Recoating and Refurbishment Technology -

机译：受到先前破坏的微结构控制的镍基高温合金中的局部细胞转变对高温疲劳强度的不良影响及其预防措施：-用于重涂和翻新技术-
- 作者：Masakazu OKAZAKI;Issei OHTERA;Yoshio HARADA;Kohichi NAMBA
- 期刊名称：《Materials Science Research International》 | 2003年第1期
13.Local Structure Stability of Cu-Al_2O_3 NOx Removal Catalyst

机译：Cu-Al_2O_3 NOx脱除催化剂的局部结构稳定性
- 作者：Masakuni OZAWA;Marx WINTERER;Chun-Keung LOONG;Suguru SUZUKI
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- alumina;
- catalyst;
- copper;
- nitrogen oxides;
- automotive exhaust;
- lean-burn;
- ESR;
- XANES;
14.Inelastic Analysis and Thermal Fatigue Life Prediction of a Perforated Cylinder Based on the Effective Stress Concept

机译：基于有效应力概念的多孔圆柱体非弹性分析和热疲劳寿命预测
- 作者：Toshihide IGARI;Takumi TOKIYOSHI;Yorikata MIZOKAMI
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- inelastic analysis;
- constitutive equation;
- perforated plate;
- thermal fatigue;
- creep-fatigue life prediction;
15.Design and Function of Lignin-Based Recyclable Composites

机译：木质素基可回收复合材料的设计与功能
- 作者：Yukiko NAGAMATSU;Masamitsu FUNAOKA
- 期刊名称：《Materials Science Research International》 | 2003年第1期
16.The Numerical Simulation of the Mechanical Behavior of CFCC with Matrix Anisotropic Damage by Homogenization Method

机译：均质化方法对CFCC基体各向异性损伤力学行为的数值模拟
- 作者：Dongmei LUO;Shigeo TAKEZONO
- 期刊名称：《Materials Science Research International》 | 2003年第1期
17.Prediction of Mechanical Properties of Lead-free Solders Using Indentation Method

机译：压痕法预测无铅焊料的机械性能
- 作者：Akira MIYAMOTO;Takeshi OGAWA;Tadashi OHSAWA
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- lead-free solder;
- indentation method;
- mechanical properties;
- elastic;
- plastic;
- creep;
- FEM analysis;
18.Mechanism of Corrosion Resistance Degradation of Cr-Plated Parts Due to Heat Treatment and Its Prevention

机译：热处理导致Cr镀层耐蚀性下降的机理及其预防
- 作者：Yuichi KOBAYASHI;Jun-ichi NAGASAWA;Toshihiko SASAKI;Yukio HIROSE
- 期刊名称：《Materials Science Research International》 | 2003年第1期
- Cr-plating layer;
- postfinishing;
- corrosion resistance;
- residual stress;
- X-ray stress measurement;
- heat treatment;
19.Solid State Diffusion Bonding of Superplastic Duplex Stainless Steel with Carbon Steel

机译：超塑性双相不锈钢与碳钢的固相扩散结合
- 作者：Iswadi JAUHARI;Hiroyuki OGIYAMA;Hitoshi TSUKUDA
- 期刊名称：《Materials Science Research International》 | 2003年第2期
- superplastic duplex stainless steel;
- carbon steel;
- diffusion bonding;
- activation energy;
20.Residual Thermal Stresses in Multilayered Functionally Graded Material Plates

机译：多层功能梯度材料板中的残余热应力
- 作者：Gang JIN;Hideo AWAJI
- 期刊名称：《Materials Science Research International》 | 2003年第2期
21.Remaining Life Evaluation of 316LC Steel Based on a New Creep-Fatigue Damage Rule

机译：基于新的蠕变疲劳损伤规则的316LC钢剩余寿命评估
- 作者：Katsuyuki TOKIMASA;Mitsuo MIYAHARA
- 期刊名称：《Materials Science Research International》 | 2003年第2期
- creep-fatigue;
- damage rule;
- material damage;
- small crack;
- crack growth;
- remaining life evaluation;
- life prediction;
- 316LC steel;
22.Probabilistic Estimation of the Degradation of Function and Strength of Ti-41.7Ni-8.5Cu (at%) Shape Memory Alloys under Thermo-Mechanical Cyclic Conditions

机译：热机械循环条件下Ti-41.7Ni-8.5Cu（at％）形状记忆合金功能和强度下降的概率估计
- 作者：Maho HOSOGI;Nagatoshi OKABE;Toshio SAKUMA;Shuichi MIYAZAKI
- 期刊名称：《Materials Science Research International》 | 2003年第2期
- Ti-Ni-Cu shape memory alloy;
- thermo-mechanical cycle;
- degradation;
- function;
- reliability design;
23.Effects of Cold Working and Heat Treatment on Transformation Temperature of Ti-41.7Ni-8.5Cu (at%) Shape Memory Alloy and Its Probabilistic Prediction

机译：冷加工和热处理对Ti-41.7Ni-8.5Cu（at％）形状记忆合金相变温度的影响及其概率预测
- 作者：Maho HOSOGI;Nagatoshi OKABE;Toshio SAKUMA;Shuichi MIYAZAKI
- 期刊名称：《Materials Science Research International》 | 2003年第2期
24.The Effect of Loading Direction and Stacking Sequence on the Strength in Quasi-Isotropic CFRP Laminates

机译：准各向同性CFRP层压板的加载方向和堆垛顺序对强度的影响
- 作者：Masamichi NAGATA;Shigeo TAKEZONO;Jianqiao CHEN;Katsumi TAO;Takeshi SUGIYO;Nobuhiro MATOBA
- 期刊名称：《Materials Science Research International》 | 2003年第2期
- CFRP laminates;
- rsai-Wu failure criterion;
- strength;
- loading direction;
- stacking sequence;
25.Micro-structure of Bentonite Clay and Diffusion Coefficient Given by Multiscale Homogenization Analysis

机译：多尺度均质分析给出的膨润土黏土的微观结构和扩散系数
- 作者：Naoki FUJII;Yasuaki ICHIKAWA;Katsuyuki KAWAMURA;Satoru SUZUKI;Kazumi KITAYAMA
- 期刊名称：《Materials Science Research International》 | 2003年第2期
- bentonite;
- diffusion;
- multiscale homogenization analysis;
- HTO;
- montmorillonite hydrate;
- molecular dynamics;
- geological disposal;
26.Impact Damage Resistance of CFRP Laminate with Epoxy-Resin Surface Layer

机译：环氧树脂表面层的CFRP层压板的耐冲击破坏性
- 作者：Seung-Min JANG;Tadaharu ADACHI;Akihiko YAMAJI
- 期刊名称：《Materials Science Research International》 | 2003年第2期
- composite material;
- CFRP;
- impact damage resistance;
- delamination;
27.Hydroxyapatite Coatings on Ti Plate via Chemical Bath Deposition

机译：通过化学浴沉积在钛板上的羟基磷灰石涂层
- 作者：Yu JIA;Yoshinori KANNO
- 期刊名称：《Materials Science Research International》 | 2003年第2期
- titanium;
- hydroxyapatite;
- coating;
- chemical bath deposition;
- implant materials;
28.Assessment of Damage Tolerance and Reliability for Ceramics

机译：陶瓷的损伤容忍度和可靠性评估
- 作者：Akihiko SUZUKI;Hidenari BABA
- 期刊名称：《Materials Science Research International》 | 2003年第2期
- ceramics;
- porous ceramics;
- damage tolerance;
- reliability;
- nonlinear stress-strain curve;
- simulation;
- weibull modulus;
- R-curve;
- material model;
29.Effects of Bias Voltage and Discharge Current on Mechanical Properties of TiN Film Deposited by DC Magnetron Sputtering

机译：偏置电压和放电电流对直流磁控溅射沉积TiN薄膜力学性能的影响
- 作者：Hirotaka TANABE;Yoshio MIYOSHI;Tohru TAKAMATSU;Hideyuki SUGIURA
- 期刊名称：《Materials Science Research International》 | 2003年第2期
- TiN film;
- sputtering;
- residual stress;
- hardness;
- toughness;
- adhesive strength;
- X-ray diffraction;
30.The High Strain Rate Dynamic Stress-Strain Curve for OFHC Copper

机译：OFHC铜的高应变速率动应力-应变曲线
- 作者：Michael. E. STEVENSON;Stanley. E. JONES;Richard. C. BRADT
- 期刊名称：《Materials Science Research International》 | 2003年第3期
- aluminum;
- copper;
- dynamic stress-strain;
- taylor test;
- twinning;
31.Deformation Mechanism of [001] Oriented Fe-30%Cr Alloy Single Crystals

机译：[001]取向的Fe-30％Cr合金单晶的变形机理
- 作者：Sei MIURA;Motohiko KOUSHIMA
- 期刊名称：《Materials Science Research International》 | 2003年第3期
- plastic deformation;
- Fe-30Cr single crystal;
- lueders band;
- strain aging;
32.Effects of Tempering Temperature and Stress Amplitude on Low-cycle Fatigue Behavior of a Cold-Work Tool Steel

机译：回火温度和应力幅度对冷作工具钢低周疲劳行为的影响
- 作者：Daien YOKOI;Nobuhiro TSUJII;Kenzo FUKAURA
- 期刊名称：《Materials Science Research International》 | 2003年第3期
- cold-work tool steel;
- fatigue;
- stress amplitude;
- tempering temperature;
- retained austenite;
33.Lueders Deformation and Strain Aging of [001] Oriented Fe-30%Cr Alloy Single Crystals

机译：[001]取向的Fe-30％Cr合金单晶的Lueders变形和应变时效
- 作者：Motohiko KOUSHIMA;Sei MIURA
- 期刊名称：《Materials Science Research International》 | 2003年第3期
- plastic deformation;
- Fe-30Cr single crystal;
- lueders band;
- strain aging;
34.Fatigue Properties of Pre-strained Eutectoid Steel

机译：预应力共析钢的疲劳性能
- 作者：Wenxian SUN;Shin-ichi NISHIDA;Nobusuke HATTORI
- 期刊名称：《Materials Science Research International》 | 2003年第3期
- eutectoid steel;
- fatigue property;
- fatigue crack;
- pre-strain;
- initiation;
- propagation;
- rail;
- fractography;
35.Corrosion Behavior of Epoxy Resin Cured with Different Amount of Hardener in Corrosive Solutions

机译：不同固化剂量的环氧树脂在腐蚀溶液中的腐蚀行为
- 作者：Hideki SEMBOKUYA;Yoshiyuki NEGISHI;Masatoshi KUBOUCHI;Ken TSUDA
- 期刊名称：《Materials Science Research International》 | 2003年第3期
- epoxy resin;
- corrosion;
- hardener;
- sulfuric acid;
- degradation;
- polymer;
- curing agent;
- strength;
36.Effects of Prestraining on High-Cycle Fatigue Strength of High-Strength Low Alloy TRIP-Aided Steels

机译：预应变对高强度低合金TRIP辅助钢高周疲劳强度的影响
- 作者：Sung-Moo SONG;Koh-ichi SUGIMOTO;Shinsuke KANDAKA;Asahiko FUTAMURA;Mitsuyuki KOBAYASHI;Setsuya MASUDA
- 期刊名称：《Materials Science Research International》 | 2003年第3期
- high cycle fatigue;
- prestrain;
- law alloy TRIP steel;
- high strength steel;
- transformation induced plasticity;
- retained austenite;
- internal stress;
37.Effect of Air-oxidation on the Thermal Diffusivity of the Nuclear Grade 2-dimensional Carbon Fiber Reinforced Carbon/carbon Composite

机译：空气氧化对核级二维碳纤维增强碳/碳复合材料热扩散率的影响
- 作者：Toshiaki SOGABE;Masahiro ISHIHARA;Shin-ichi BABA;Yukio TACHIBANA;Masatoshi YAMAJI;Tatsuo IYOKU;Taiji HOSHIYA
- 期刊名称：《Materials Science Research International》 | 2003年第3期
38.Fracture Behavior of HIP Bonded C1100 Copper and SS400 Mild Steel

机译：HIP粘结的C1100铜和SS400低碳钢的断裂行为
- 作者：Isamu ODA;Andrew WILLETT;Yasuhide SOSOGI;Mitsuharu YAMAMOTO
- 期刊名称：《Materials Science Research International》 | 2003年第4期
- fracture mechanics;
- bonded dissimilar plates;
- hot isostatic pressing;
39.Fatigue Strength of Ti-6Al-4V Alloys Containing Small Artificial Defects

机译：含有微小人为缺陷的Ti-6Al-4V合金的疲劳强度
- 作者：Hisao MATSUNAGA;Yukitaka MURAKAMI;Masanobu KUBOTA;Joon-Hyun LEE
- 期刊名称：《Materials Science Research International》 | 2003年第4期
- fatigue;
- fatigue limit;
- Ti-6Al-4V allay;
- small defect;
- small crack;
- artificial hole;
- burr;
- pre-crack;
- non-propagating crack;
- the (area)~(1/2) parameter model;
40.Constitutive Equation for Plastic Behavior of Hydrostatic-Pressure-Dependent Polymers

机译：静水压相关聚合物塑性行为的本构方程
- 作者：Yukio SANOMURA
- 期刊名称：《Materials Science Research International》 | 2003年第4期
- constitutive equation;
- polymer;
- plastic behavior;
- hydrostatic pressure dependence;
- nonassociated flow rule;
41.Mechanical Properties of Thermoplastic Rods by Hot Extrusion in Solid State under Constrained Strain Recovery

机译：约束应变恢复下固态热挤压热塑性棒的力学性能
- 作者：Yukio SANOMURA
- 期刊名称：《Materials Science Research International》 | 2003年第4期
- mechanical properties;
- thermoplastics;
- solid-state extrusion;
- constrained strain recovery;
- elevated temperature;
42.Aperture of Granite Fracture and Effects for Fluid Flow

机译：花岗岩断裂的孔径及其对流体流动的影响
- 作者：Byung-Gon CHAE;Yasuaki ICHIKAWA;Gyo-Cheol JEONG;Yong-Seok SEO
- 期刊名称：《Materials Science Research International》 | 2003年第4期
- rock fracture;
- aperture;
- confocal laser scanning microscope (CLSM);
- permeability;
- hydraulic aperture;
43.Effect of Texture and Composition of Microorganisms Carrier for Disposal of Wastewater

机译：微生物载体结构和组成对废水处理的影响
- 作者：Yasushi HIRASHIMA;Toshihiro MORIGA;Toshifumi ASHIDA;Eiji KANEZAKI;Kei-ichiro MURAI;Ichiro NAKABAYASHI
- 期刊名称：《Materials Science Research International》 | 2003年第4期
- microorganisms carrier;
- disposal of wastewater;
- microporous materials;
- surface properties;
44.Domain Structures and Rheological Properties of Immiscible Polymer Blends under Shear Flow in Parallel Plates

机译：平行板剪切流下不混溶聚合物共混物的畴结构和流变性质
- 作者：Yoshiaki TAKAHASHI;Naotomo IMURA;Kyoko MIYAMSHI;Shinichi KITADE;Ichiro NODA
- 期刊名称：《Materials Science Research International》 | 2003年第4期
- domain structure;
- rheological properties;
- immiscible polymer blend;
- parallel plate;
- transient state;
45.Lattice trapping on the {011} cleavage plane in NiAl

机译：NiAl在{011}裂解面上的晶格陷阱
- 作者：Matthias Ludwig
- 期刊名称：《Materials Science Research International》 | 1999年第4期
- NiAl;
- Lattice trapping;
- Embedded atom method;
- Crack;
- Brittle cleavage;
- Atomistic;
- Finite element;
- Cleavage plane;
- Spring model;
46.Characterization of integrated data on inherent flaws in engineering ceramics

机译：工程陶瓷固有缺陷的综合数据表征
- 作者：Toshihiko Hoshide;Hidehiko Hiramatsu
- 期刊名称：《Materials Science Research International》 | 1999年第4期
- Ceramics;
- Inherent;
- Flaw;
- Data characterization;
- Strength;
- Flaw size;
- Flaw type;
- Statistical distribution;
- Grain size;
- Porosity;
- Database;
47.Deformation analysis of laser processed grain oriented silicon steel sheet using moire interferometry

机译：莫尔干涉法分析激光加工取向硅钢片的变形
- 作者：Xie Huimin;Satoshi Kishimoto;Li Jindong;Zou Daqing;Dai Fulong;Norio Shinya
- 期刊名称：《Materials Science Research International》 | 1999年第4期
- Laser processing;
- Silicon steel;
- Moire interferometry;
48.Effect of SiC volume fraction on creep behavior of SiCp/2124AL metal matrix composite

机译：SiC体积分数对SiCp / 2124AL金属基复合材料蠕变行为的影响
- 作者：Ho Jin Ryu;Woong Hee Song;Soon Hyung Hong
- 期刊名称：《Materials Science Research International》 | 1999年第4期
- Metal matrix composite;
- Creep behavior;
- Load transfer;
- Volume fraction;
- Particulate reinforcement;
49.Cooperative dislocation generation at finite temperatures in loaded solids -- transition from brittle to ductile regime

机译：在有限温度下在负载固体中产生合作位错-从脆性转变为韧性状态
- 作者：Mahadevan Khantha;Mang-Mang Ling;Vaclav Vitek
- 期刊名称：《Materials Science Research International》 | 1999年第4期
- Kosterlitz-Thouless transition;
- Monte Carlo;
- Mean field;
- Critical temperature;
- Brittle-ductile transition;
50.Molecular dynamics study of the stress distribution near a crack tip in β-silicon nitride

机译：β-氮化硅裂纹尖端附近应力分布的分子动力学研究
- 作者：Naoto Hirosaki;Shigenobu Ogata;Hiroshi Kitagawa
- 期刊名称：《Materials Science Research International》 | 1999年第4期
- β-Si{sub}3N{sub}4;
- Molecular dynamics;
- Simulation;
- Stress intensity factor;
- Stress;
- Linear elastic solution;
51.Connecting molecular dynamics and dislocation dynamics to continuum in hierarchical simulations of microcracks in solids

机译：将分子动力学和位错动力学连接到固体微裂纹分层模拟中的连续体
- 作者：Akihiro Nakatani;Hiroshi Kitagawa;Sidney Yip
- 期刊名称：《Materials Science Research International》 | 1999年第4期
52.Atomic-level description of material strength of α-Fe

机译：α-Fe材料强度的原子级描述
- 作者：Yoji Shibutani;Genrich L. Krasko;Mojmir Sob;Sidney Yip
- 期刊名称：《Materials Science Research International》 | 1999年第4期
53.Mesoscopic dynamics on dislocation patterning in fatigued material by cellular automata

机译：细胞自动机在疲劳材料中位错构图的介观动力学
- 作者：Yoji Shibutani
- 期刊名称：《Materials Science Research International》 | 1999年第4期
54.Topochemistry of SiO{sub}2 wood-inorganic composites for enhancing water-repellency

机译：SiO {sub} 2木材-无机复合材料的拓扑化学增强疏水性
- 作者：Hisashi Miyafuji;Shiro Saka
- 期刊名称：《Materials Science Research International》 | 1999年第4期
- Wood-inorganic composites;
- Sol-gel process;
- Topochemistry;
- Property-enhancement;
- Water-repellency;
- SiO{sub}2 gels;
- HFOETMOS;
55.Quantitative evaluation of pinhole defects in TiN films prepared by R.F. reactive sputtering

机译：R.F.制备的TiN膜中针孔缺陷的定量评估反应溅射
- 作者：Hitoshi Uchida;Shozo Inoue;Yasuhide Nakano;Keiji Koterazawa
- 期刊名称：《Materials Science Research International》 | 1999年第4期
- Dry coating;
- Titanium nitride R.f. reactive sputtering;
- Pinhole defect;
- Anodic polarization curve;
- Quantitative evaluation;
56.Interfacial microstructure and fracture characterization of Al{sub}18B{sub}4O{sub}33/Al alloy composites

机译：Al {sub} 18B {sub} 4O {sub} 33 / Al复合材料的界面组织和断裂特性
- 作者：Gen Sasaki;Makoto Yoshida;Jin Pan;Hideharu Fukuenaga
- 期刊名称：《Materials Science Research International》 | 1999年第4期
- Metal matrix composites;
- Fracture;
- Transmission electron microscopy;
- Mechanical properties;
- Interface structure;
57.Effects of Interface Control and Heat-Treatment Temperature on Interlaminar Shear Strength and Mode II Interlaminar Fracture Toughness of Woven C/C Composites

机译：界面控制和热处理温度对编织C / C复合材料层间剪切强度和II型层间断裂韧性的影响
- 作者：Masaki HOJO;Taketoshi YAMAO;Mototsugu TANAKA
- 期刊名称：《Materials Science Research International》 | 2001年第1期
58.The Effect of Microcracks on the Mechanical Anisotropy of Granite

机译：微裂纹对花岗岩力学各向异性的影响
- 作者：Sang-Eun LEE;Sang-Ho CHO;Yong-Seok SEO
- 期刊名称：《Materials Science Research International》 | 2001年第1期
- granite;
- mechanical anisotropy;
- P-wave velocity;
- tensile strength;
- uniaxial strength;
59.Quality Evaluation of Molded Epoxy Resin and Particulate Filled Composites by Ultrasonic Technique

机译：超声成型法评价环氧树脂和颗粒填充复合材料的质量
- 作者：Kazuyoshi ARAI;Wen Fa LI;Shigeru ONO
- 期刊名称：《Materials Science Research International》 | 2001年第1期
- ultrasonic technique;
- quality evaluation;
- epoxy resin;
- particulate filled composite;
60.Improvement of Mechanical Properties of Ferrum Lime Stabilized Soil with the Addition of Aluminum Sludge

机译：添加铝泥改善铁质石灰稳定土的力学性能
- 作者：Masashi KAMON;Huanda GU;Masahiro I
- 期刊名称：《Materials Science Research International》 | 2001年第1期
- stabilized soil;
- ferric oxide;
- aluminum sludge;
- unconfined compressive strength;
- flexural strength;
- SEM;
- X-ray diffraction;
61.Analysis on the Flexural Behavior of Externally Prestressed Beam with Large Eccentricity by the Method of Moment-Curvature Relationship

机译：大弯矩体外预应力梁的弯矩-弯矩关系分析
- 作者：Fang DEPING;Toyoaki MIYAGAWA;Takashi YAMAMOTO
- 期刊名称：《Materials Science Research International》 | 2001年第1期
- external prestressing;
- flexural strength;
- large eccentricity;
- moment-curvature;
- prestressed concrete;
- continuous beams;
62.Simulation of the Forging Process Incorporating Strain-Induced Phase Transformation Using the Finite Volume Method (Part II; Effects of Strain Rate on Structural Change and Mechanical Behavior)

机译：有限体积法模拟结合应变诱导相变的锻造过程（第二部分;应变率对结构变化和力学行为的影响）
- 作者：Peiran DING;Dong-Ying JU;Tatsuo INOUE
- 期刊名称：《Materials Science Research International》 | 2001年第1期
63.Variation in Preferred Orientations of TiN Thin Films Prepared by Ion Beam Assisted Deposition

机译：离子束辅助沉积制备的TiN薄膜择优取向的变化
- 作者：Akihito MATSUMURO;Toshiyuki HAYASHI;Mutsuo MURAMATSU
- 期刊名称：《Materials Science Research International》 | 2001年第1期
- titanium nitride;
- preferred orientation;
- ion beam assisted deposition;
- transport ratio;
- incidence angle;
- thickness;
- temperature;
64.AE Technique for Identification of Micro Failure Modes in CFRP Composites

机译：AE技术识别CFRP复合材料中的微观破坏模式
- 作者：Qing-Qing NI;Ken KURASHIKI;Masaharu IWAMOTO
- 期刊名称：《Materials Science Research International》 | 2001年第1期
- time-frequency analysis;
- short-time fourier iransform;
- failure mode;
- acoustic emission;
- attenuation;
65.Simulation of the Forging Process Incorporating Strain-Induced Phase Transformation Using the Finite Volume Method

机译：有限体积法模拟结合应变诱导相变的锻造过程
- 作者：Peiran DING;Tatsuo INOUE;Shoji IMATANI
- 期刊名称：《Materials Science Research International》 | 2001年第1期
66.Simulation of the forgin gprocess incorporating strain-induced phase transformation using the finite volume method (part I; basic theory and numerical methodology)

机译：使用有限体积方法对包含应变诱导相变的异物过程进行模拟（第一部分;基本理论和数值方法）
- 作者：Peiran Ding;Tatsuo Inoue;Shoji Imatani;Dong-Ying Ju;Edwin de Vries
- 期刊名称：《Materials Science Research International》 | 2001年第1期
67.A Study on the Influence of Mechanical Properties on the Distribution of Axial Residual Stress after Cold Drawing of Metallic Bars

机译：力学性能对金属棒冷拔后轴向残余应力分布的影响研究
- 作者：Takashi KUBOKI;Ishine KAWAKAMI;Yutaka NEISHI
- 期刊名称：《Materials Science Research International》 | 2001年第1期
- drawing;
- residual stress;
- mechanical properties;
- skin pass;
68.Residual Stress and In-situ Thermal Stress Measurements of Copper Films on Glass Substrate

机译：玻璃基板上铜膜的残余应力和原位热应力测量
- 作者：Takao HANABUSA;Masayuki NISHIDA
- 期刊名称：《Materials Science Research International》 | 2001年第1期
- Cu film;
- residual stress;
- in-situ thermal stress;
- X-ray stress measurement;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号