• 主题
高级搜索  >
历史搜索 清空历史
您现在的位置：首页> 中文期刊>化学工业>工业技术>中国耐火材料（英文版）

中国耐火材料（英文版）

中国耐火材料（英文版）

China's Refractories
本刊1992年经国家科委批准创办,由洛阳耐火材料研究院主办,是目前中国耐火材料行业唯一的一本英文杂志,现为季刊。创刊以来己出11卷(包括今年),受到海内外学者、企业家、商人的欢迎。目前与国外二十家杂志建立了交换关系,例如,美国的"陶瓷协会会刊与英国的"耐火材料与陶瓷",德国的"陶瓷论坛",比利时的"硅酸盐",法国的"陶瓷工业",日本的"耐火物"等。并且与几家著名的二次文献检索刊物也建立了密切联系。 目前国内外订户及赠阅数、交换数达1000多本/年,国外订户主要分布在美国、英国、印度、日本、德国、法国、南非、阿根廷以及东南亚和阿拉伯等十几个国家。 本杂志主要反映当前中国耐火材料发展现状。论文内容涉及到原料、工艺、生产及应用方面的新进展,以及设备更新。除研究报告和论文、综述与展望外,还报道了国家公布的一些统计数据,市场信息反迸出口情况等。同时我刊还可刊登广告和厂矿简介。 当时创办该刊的目的主要是让世界了解中国耐火材料,试图在中国耐火材料与世界耐火材料同行之间架起一座信息桥梁。尤其中国已加入世界贸易组织(WTO),我们需要更多地参与国际市场竞争,那么通过《中国耐火材料》的介绍,无疑是一条重要的渠道。 目前为止,由于《中国耐火材料》的介绍或通过《中国耐火材料》的报道,取得与国外商人联系并最终出口耐火材料产品或原料的企业十几家。 众所周知,中国耐火材料通过20多年改革开放,无论在原材料的质量上还是在制成品的质量上都有了长足的进展,有的已接近或超过国外先进水平。由于过去政策封闭,耐火材料行业因与外界联系较少,出口渠道少,出口最也就少。随着我国改革开放政策的深入,与国际同行交流日趋增加,中国耐火材料原料及产品出口也逐年增加,但与中国耐火材料产量相比,远远不够.尤其在国内市场竞争日趋激烈的条件下,寻求出口不乏是重要出路之一。因此需要更多媒体的介入,以便广交国际朋友,扩大出口渠道。
更多
  • 发文量：1370
  • 被引量：22
  • H指数：0
  • 开始收录时间：1994,3(1)
  • CNKI综合因子：0.0
  • 维普期刊影响因子： 0.07
  • 万方期刊影响因子：0.09
  • 创刊时间：1992
  • 国内刊号/CN：41-1183/TQ
    国际刊号/ISSN：1004-4493
  • 发行周期：季刊
    邮发代号：
  • 主管单位：洛阳耐火材料研究院
    主办单位：洛阳耐火材料研究院
中国耐火材料（英文版）-联系信息
  • 主编：WANG Zhanmin
  • 电话：0379-64205961
  • 邮箱：chnr@nhcl.com.cn
  • 地址：洛阳市涧西区西苑路43号中钢集团洛阳耐火材料研究院有限公司
  • 邮编：471039
中国耐火材料（英文版）-获奖情况
  • • 中国冶金优秀期刊
  • • 中国期刊方阵"双效"期刊
  • 收录汇总
  • 刊内文献检索
  • 投稿信息

刊期浏览

相关中文期刊

相关中文会议

最新期刊

热门期刊

中国耐火材料（英文版） >2021年第4期

学科

年度

全选（0）
排序：
共4384条结果
  • 摘要：Volume 45,Number 6,2011 Self-propagating high-temperature synthesis of Al4SiC4 and B4C and their application in carboncontaining refractories/Wang Gang, Wang Longqing,Wang Laiwen,et al/ /Naihuo Cailiao. -2011,45( 6) : 401 Abstract: Al4SiC4 powder was synthesized by chemical oven self-propagating high-temperature synthesis ( COSHS) using Al,Si,carbon black or graphite as main starting materials. Alumina - graphite
  • 摘要：Slag corrosion resistance of MgO ZrO2 refractories was investigated in this work. The results indicate that in a non-oriented electric steel slag system with a high ratio of calcia to silica,the slag resistance of MgO ZrO2 refractories can be described as follows: ZrO2 reacts with CaO forming calcium zirconate compound which strengthens the material and blocks the channel of the slag infiltration; however,in an oriented electric steel slag system with a high concentration of silica and the low ratio of calcia to silica,the slag corrosion resistance of MgO ZrO2 refractories is different; ZrO2 reacts with CaO forming the calcium zirconate and simultaneously one more product C2S as well; C2S can improve corrosion resistance by blinding pore and enhancing slag viscosity; therefore,it is expected to be the major reason for the enhanced corrosion resistance observed for MgO ZrO2 refractories.
  • 摘要：The research development on new dry vibrating re- fractories,magnesia based slag dam and bubble curtain barricade for continuous casting tundish was introduced.
  • 摘要：The development status,production technology and characteristics of MgO - CaO refractories are introduced, covering MgO - CaO clinkers,fired MgO - CaO bricks and unburned MgO - CaO - C bricks. The applications of MgO - CaO refractories in secondary refining furnaces including AOD,VOD,LF-VD and GOR are introduced.
  • 摘要：Functional refractories,including submerged entry nozzle ( SEN) ,ladle shroud and monolithic stopper, are the key refractories for continuous casting. Driven by the demand of high-speed continuous casting,traditional functional refractories fail to meet the needs of long span life,and high performance functional refractories for continuous casting are increasingly required. Through structure and material design,the performance of functional refractories is significantly improved. In this paper,some research advances on functional refractories for continuous casting were mentioned. Through numerical modeling and hot simulation,the service life of non-preheating ladle shroud was increased from 8 h to more than 12 h. Through the water modeling,the flow patterns in the mold were significantly improved and through hot simulation and material design,the service life and reliability of SEN were also significantly improved.
  • 摘要：Quotation Analysis of Light-burnt Magnesia in 2011 In 2011, the price of light-burnt magnesia was steady with a little increase. The sales volume was medium. The mainstream prices of light-burnt magnesia 85 and 90 were CNY 450 per ton and CNY 600 per ton (duty-unpaid price), respectively. Because of the season reasons, July, August, December and January are the slack months. The price of
  • 摘要：Based on the relevant phase diagrams of ternary system in MgO-CaO-ZrO2-SiO2 quarternary systems,the phase diagram of Fe-O system and the condensed phase stability area diagram of iron oxides,the corrosion resistance of MgO-CaO-ZrO2 refractories to silicate cement,and the forming conditions and preparing measures of hercynite are analyzed.
  • 摘要：ScopeThis standard specifies the terms,definitions,classification,brands,technical requirements,test methods,inspection rules,packing,marking,transportation,storage,and quality certificate of fused zirconia.This standard is applicable to monoclinic fused zirconia and partially stabilized fused zirconia.
  • 摘要：This paper presents a review on roles of refractories playing in IF steel technology,problems and countermeasures in refractory applications and developments of refractories in ladle lining,concasting,tundish and mold metallurgy.Greater attention has been paid to the carbon and oxygen pick up and inclusion defects caused by refractories that are concerned most in IF steel technology.
  • 摘要：Based on the refractories research of Baosteel,the demands for refractories from the developing steel-making technology as high security,high efficiency,energy saving and environment friendly are introduced.
  • 摘要：Focusing on high energy consumption of refractories,our research works about monolithic refractories were introduced,such as bauxite-based corundum,microporous light-weight bauxite-based clinker,light-weight alumina-rich spinel,magnesia micropowder,fast-drying refractory castables of blast furnace,largearea long-life fast-sintering fling refractories for converter,high-strength light-weight mullite castables for ladle permanent liner,high-strength and low-conductivity forsterite-vermiculite insulating board,basic shotcreting castables for ladle permanent liner,magnesiacalcia gunning mix for RH refining furnace,and light-weight castables in petrochemical industry.
  • 摘要：This paper introduces the refractories used in various nonferrous metal smelting equipment in China and the existing problems,and puts forward suggestions on the material of refractories,application of new technologies and production management of refractories,etc.
  • 摘要：@@ Xixiaoping Refractory (Group)Co., Ltd.includes six sub-companies:Shanxi Xixiaoping Refractory Co., Ltd. and Shanghai New Taishan Refractories Co., Lted.etc.The Group locates in the Northeast of Shanxi Province, where there is abundant minerals resource, and the transportation is convenient.
  • 摘要：无
  • 摘要：Growth rale of castings output slows down in China According to information released by the China Foundry Association at the Sixth China High-Level Foundry Industry Forum on April 7,2013,the total2012 output of various kinds of castings in China was up to 42.5 million tonnes,up 2.4%compared to 2011,and the growth rate of output of castings in China is slowing down sharply.From the changes of materials types,it is known that in 2012,the output of aluminum alloy castings was increased by 7.2%,nodular iron castings 3.8%;the output of grey iron castings was slightly increased while that of steel castings had no growth.
  • 摘要：Properties of magnesia-hercynite brick were studied. The coatability, thermal shock resistance, corrosion resistance to cement clinker and thermal conductivity were compared with those of magnesia-chrome brick and magnesia-spinel brick used widely in sintering zone of cement rotary kiln. The result shows that magnesia-hercynite brick is better than magnesia-chrome brick in thermal chock resistance and Corrosi on resistance to cement clinker, is similar to magnesia-chrome brick and is better than magnesia-spinel brick in coatability and thermal conductivity.
  • 摘要：Hot metal transfer ladles were historically lined with high alumina refractories because of compatibility of high alumina refractories with the highly acidic slag, which is transferred from the iron making plant along with hot metal. With the introduction of higher capacity ladles, technological advancement in the process and increased productivity, calls for a higher campaign life of hot metal ladles, which could not be performed by ordinary high alumina refractories. Resin bonded Al2O3-SiC-C(hereinafter ASC)bricks gradually developed which at present taking place replacing the conventional refractories. Considerable work has been carried out in developing the ASC refractory to reach the present state. However, for higher capacity ladles still there is a lot of scope for improvement The present paper deals with the newly developed ASC bricks, which was used in 165 ton capacity hot metal ladles in one European plant and has given a substantial increase in performance. But, the customer was not fully satisfied since the brick was reported to produce smokes during preheating of the ladle. In the subsequent supply the smoke generation problem was taken care by adjusting the binders and additives and eco-friendly bricks were re-engineered and supplied to the same plant, which also performed splendidly and created all time record in their plant history.
  • 摘要：@@ 1 ScopernThis standard specifies the classification, shape, dimension, technical requirements, test method,inspection rules, packing, marking,transportation,storage and quality certification of fireclay refractory bricks for hot blast stove.
  • 摘要：无
  • 摘要：Petroleum coke, graphite, gas carbon and lower sulfur carbon black were used to prepare reaction-bonded silicon carbide. The influences of different carbon containing materials on properties of carbonaceous precursors, sintering process, and microstructure of the prepared SiC were researched. The results show that:(1)With the density of carbon containing materials increasing, the porosity of carbonaceous precursors decreases and the infiltrating process of liquid silicon is more difficult.(2)The reaction between carbon containing materials and liquid silicon, the volume effect is more obvious with the density of carbon containing materials increasing.(3)As the carbon containing materials density decreasing, residual carbon in reaction bonded SiC also decreases.
  • 摘要：Ti3SiC2/SiC composites were fabricated by reactive hot pressing method. Effects of hot pressing temperature, the content and panicle size of SiC on phase composition, densification, mechanical properties and behavior of stress-strain of the composites were investigated. The results showed that:(1)Hot-pressing temperature influenced the phase composition of Ti3SiC2/SiC composites. The flexural strength and fracture toughness of composites increased with hot pressing temperature.(2)It became more difficult for the composites to densify when the content of SiC in composites increased. It need be sintered at higher temperature to get denser composite. The flexural strength and fracture toughness of composites increased when the content of SiC added in composites increased. However, when the content of SiC reached 50 wt%, the flexural strength and fracture toughness of composites decreased due to high content of pore in composites.(3)When the content of SiC was same, Ti3SiC2/SiC composites were denser while the particle size of SiC added in composites is 12.8μm compared with the composites that the particle size of SiC added is 3μm.The flexural strength and fracture toughness of composites increased with the increase of particle size of SiC added in composites.(4)Ti3SiC2/SiC composites were non-brittle fracture at room temperature.
  • 摘要：@@ This standard is applicable to fireclay refractory bricks with unit weight≥50kg for glass melting furnaces.
  • 摘要：Bauxite-based mullite grogs were prepared with grade II bauxite(≤3mm)and coal gangue(≤3mm)as starting materials with formula of w(Al2O3)=68%～72%.Mill the mixture to particle size≤0.044mm by wet milling to homogenize chemical composition. After shaping by wet extrusion and drying, the materials were fired at 1550℃, 1600℃ and 1700℃ for 6 hours respectively. After cooling apparent porosity and bulk density of fired materials were tested. The results show as follows: the appropriate sintering temperature for bauxite-based mullite with homogeneous and consistent composition and microstructure and properties is 1600℃,at which the mullite has apparent porosity≤1.5%,bulk density≥2.81g·cm-3and refractoriness under load is 1610-1650℃.Compared with the laboratory results, the sintering temperature is lowered about 100℃,bulk density increased 0.06g?cm-3.The industrial feasibility of preparing bauxite-based mullite grogs with the processing is confirmed.
  • 摘要：@@ 1 ScopernThis standard specifies the classification, technical requirements, test method, inspection rules,marking,packing,transportation,storage and quality certification of high quality silica bricks for glass melting furnace.
  • 摘要：SEN is a key relative technology to TSCC, the quality of which influences not only the heats of continuous casting but also the stream field in the mould. The powder line is the key part of SEN, that determines the continuous casting life. In this study the microstracture of used SEN samples were examined by SEM, the causes of the abnormal erosion phenomena were analyzed from slag corrosion mechanism, reactions between carbon containing refractories and slag and molten steel, properties of refractories. The improvement of the quality of SEN were achieved by adjusting the graphite content and composite structure designing of SEN's powder line.
  • 摘要：Effects of particle size (A: d50=336.9μm, B: d50=123.5μm, C: d50=19.5μm, D: d50=2.21μm) and content (1wt%, 3wt%, 5wt%, 7wt%) of silicon powder on cold crushing strength (CCS), pore size distribution and microstructure of Al2O3-ZrO2-C refractories coked at high temperature had been investigated by means of mercury porosimeter, SEM, EDS, etc. The results indicated that particle size and content of silicon powder affected the cold crushing strength of coked specimens. It increased with the addition of silicon powder and its finer particle size. However, it decreased greatly when using too fine silicon powder. The particle size and content of silicon powder also impacted the phase evolution and microstructure of coked specimens, much more β-SiC whiskers constituted network structure and well distributed in specimens with reduction of their slenderness ratios when finer silicon powder was added, corresponding to that, the specimens' pore size distribution range became narrower with smaller pore diameter, but β-SiC whiskers were distributed sparsely and the specific pore volume of small pores increased when much finer powder was added. It was worthly mentioned that some nitride could form in specimens with addition of appropriate particle size and content of silicon powder.
  • 摘要：@@ 1ScopernThis standard specifies the classification, technical requirements, test methods, inspection rules, marking, packing, transportation and storage of alkali resistant bricks.

    中国耐火材料（英文版）的期刊信息

    • 曾用名：
    • 创刊时间：1992
    • 地区：CN
    • 语言：中文
    • 热门主题：中钢集团洛阳耐火材料研究院有限公司
    • 学科分类：

      Materials Science:Ceramics and Composites;

    中国耐火材料（英文版）的获奖情况

    • • 中国冶金优秀期刊
    • • 中国期刊方阵"双效"期刊

    中国耐火材料（英文版）的收录情况

    • • 文摘杂志
    • • 化学文摘（网络版）
    • • 哥白尼索引
    • • 文摘与引文数据库

    中国耐火材料（英文版）的投稿信息

    • 投稿方式：
    • 投稿须知：点击查看
    • 期刊官方网站：点击前往
    • 版面费：
    • 审稿费：元
    • 通讯地址：洛阳市涧西区西苑路43号中钢集团洛阳耐火材料研究院有限公司
    • 邮编：471039
    • 联系电话：0379-64205961
    • 邮箱：chnr@nhcl.com.cn
    • 期刊栏目：综述；研究报告；学术讨论；应用报告
    免费订阅本刊

    客服邮箱：kefu@zhangqiaokeyan.com

    京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有 出版物经营许可证

    • 客服微信

    • 服务号