首页>外文会议>International powder metallurgy congress & exhibition;EURO PM2009;PM2009

International powder metallurgy congress & exhibition;EURO PM2009;PM2009

召开年：2009
召开地：Copenhagen(DK);Copenhagen(DK);Copenhagen(DK)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Novel High Performance and Dimensionally Controlled PM Steels for Sinterhardening

机译：用于烧结硬化的新型高性能和尺寸控制的永磁钢
- 作者：S. Saccarola;G. Belin;S. Bueno;S. Sainz;F. Castro
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
2.Microstructure and Mechanical Behavior of Hybrid Powder Systems Based on Fe-Mo-C + Cr-Ni-Mo-Mn Master Alloy

机译：基于Fe- Mo -C + Cr-Ni-Mo-Mn中间合金的混合粉末体系的组织和力学行为
- 作者：R.Oro;P.Shykula
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- Hybrid alloys;
- mechanical properties;
- microstructure;
3.Microstructure Development during Sintering of Manganese Alloyed PM Steels

机译：锰合金粉末冶金钢烧结过程中的显微组织发展
- 作者：E. Hryha;L. Nyborg;E. Dudrova;S. Bengtsson
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- alloyed sintered steels;
- manganese alloying;
- admixing;
- prealloying;
4.Lean Hybrid Low-Alloy PM Molybdenum Steels

机译：贫混合低合金永磁钼钢
- 作者：W. Brian James;Bruce Lindsley;Howard G. Rutz;K.S. Narasimhan
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
5.Improvement of Sintered Steels Properties by Microalloying and Grain Size Decrease

机译：通过微合金化和减小晶粒尺寸改善烧结钢性能
- 作者：L. Fuentes-Pacheco;I. Colera;M. Campos
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- Microalloying;
- mechanical alloying;
- sintered steels;
- grain size;
- mechanical properties;
6.Influence of Sintering Temperature and Component Density on the Properties of Prealloyed PM Steel Grades Containing Cr, Mo and Mn

机译：烧结温度和组分密度对含Cr，Mo，Mn的预合金永磁钢性能的影响
- 作者：Ola Bergman;Sven Bengtsson
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
7.Influence of Selected Alloying Elements on the Hardenability and Mechanical Properties of Recently Developed Sinterhardening PM Steels

机译：所选合金元素对最近开发的烧结硬化PM钢的淬透性和力学性能的影响
- 作者：F. Castro;A. Karuppannagounder;S. Sainz;S. Saccarola;G. Bellin;et al
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
8.Improved Sinter-Hardenability of Prealloyed Fe-Cr-Mo Steels by Extra-Fine Nickel Additions

机译：极细镍添加改善了预合金Fe-Cr-Mo钢的烧结硬化性
- 作者：M. Gauthier;S. Metcalfe;S. Pelletier;T.F. Stephenson
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
9.Properties of Sintered Steels Made from Fe Powders by Carburising-Sintering Process

机译：渗碳烧结铁粉烧结钢的性能
- 作者：CRIVEANU MARIUS CATALIN;Gingu Oana;Sima Gabriela;Mangra Mihail;Bucse lonela;et al
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
10.Thermal and Thermomechanical Treatment of Hot-Deformed Ni-Containing Powder Steels

机译：热变形含镍粉末钢的热和热机械处理
- 作者：Vladimir Dorofeyev;Yury Dorofeyev;Tatyana Goncharova
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
11.Sensor Application on Stainless Steel by Sintering of Powder Filled Pastes

机译：粉末填充烧结在不锈钢中的传感器应用
- 作者：C. Drescher;G. Veltl;F. Petzoldt;M. Busse
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
12.Advances in SMC Technology - Materials and Applications

机译：SMC技术的进展-材料和应用
- 作者：Lars Hultman Ola Andersson
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
13.Characterization of the Sintering of an Alumina Matrix-Stainless Steel Dispersion Composite and Effect of Carbon Content

机译：氧化铝基-不锈钢分散体复合材料的烧结表征及碳含量的影响
- 作者：Auger Jean-Marc;Saunier Sebastien;Valdivieso Frangois
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
14.Tape Casting of Copper Based Shape-Memory Alloys

机译：铜基形状记忆合金的流延铸造
- 作者：J.-E. Bidaux;H. Girard;V. Sonney;H. Hamdan;S. Rey-Mermet;et al
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
15.Electroless Nickel Plating with Different Pre-Treatments on Silicon Carbide Particles

机译：在碳化硅颗粒上进行不同预处理的化学镀镍
- 作者：Judit PAZMAN;Viktor MADAI;Jozsef TOTH;Zoltan GACSI Dr.
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- MMC;
- electroless nickel plating;
- acid pre-treatment;
- surface oxidation;
- palladium chloride activation;
16.Pressure Relief by Means of Porous Materials

机译：多孔材料的泄压
- 作者：Hornig J.;Markus;D.Thedens M.
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
17.Tantalum and Niobium Nanopowders for Porous Material Creation

机译：钽和铌纳米粉用于多孔材料的产生
- 作者：N.V. Isaeva;Y.V. Blagoveshchenskiy;Y.I. Melnik;N.V. Blagoveshchenskaia
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
18.Powder Structure and Tribotechnical Materials. Promising Orientations of their Engineering and Economic Features

机译：粉末结构和摩擦材料。工程和经济特征的有前途的方向
- 作者：llyushchenko A.F.;Savich V.V.
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
19.Composite Materials for Spot Welding Electrodes from Copper and WC Powders

机译：铜和WC粉末用于点焊电极的复合材料
- 作者：N. Jumate;I. Vida-Simiti;N. Sechel;Gy. Thalmaier
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- composite layers;
- plasma arc method;
- particles distribution;
- interface;
20.Thermophysical Properties of In-Situ Reinforced Copper/Copper Oxide Composites

机译：原位增强铜/铜氧化物复合材料的热物理性质
- 作者：E. Neubauer;A.AItenburger;P. Angerer
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
21.Properties of Nanosized Particles: the TaC in Stainless Steel and Ferritic Steel

机译：纳米颗粒的特性：不锈钢和铁素体钢中的TaC
- 作者：Gomes U. U. Oliveira;L. A. Furukava M.;Souza C. P.;Menezes R. Y. Torres
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- TaC;
- dispersion;
- MMC;
- nanosized and composite;
22.Selection of Tool Steels for High Density Sintered Parts

机译：高密度烧结零件工具钢的选择
- 作者：Hans Hallen;Richard Jervis;Borje Johansson;Petter Larsson
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
23.Effect of Carbon Content on the PM Processing and Properties of FeCr-TiCN Composites

机译：碳含量对FeCr-TiCN复合材料PM加工及性能的影响
- 作者：P. Alvaredo;S. Tsipas;E. Gordo
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- TiCN;
- Fe-based cermet;
- effect of carbon;
24.Wear-Microstructure-Property Relationships in Hardmetals

机译：硬质合金的磨损-微观结构-性能关系
- 作者：AJ Gant;MG Gee
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
25.Sintered in situ MMC for Wear Protection

机译：用于磨损保护的原位烧结MMC
- 作者：Hans Berns;Anastasia Saltykova
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
26.Selection Criteria of Fe Containing Hardmetal Binders for Metal Cutting Tools

机译：金属切削工具中含铁硬质合金粘结剂的选择标准
- 作者：Benno Gries
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
27.Development of New HSS Material - Weardens®

机译：开发新的高速钢材料-Weardens®
- 作者：Sten Millot;Ole Kreemer;Mogens Jensen
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
28.Effect of the Binder Phase Content and Decarburization Phenomena on the Oxidation and Wear Resistance of WC-CoNiCr Materials

机译：粘结剂相含量和脱碳现象对WC-CoNiCr材料氧化和耐磨性的影响
- 作者：M. Aristizabal;N. Rodriguez;F. Ibarreta;R. Martinez;J.M. Sanchez
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- Cemented carbides;
- Ni-Co-Cr binders;
- oxidation;
- wear;
29.Enhanced Contact Fatigue Behavior of Coated Tool Steels by Using PM Substrates

机译：通过使用PM基材增强涂层工具钢的接触疲劳行为
- 作者：G. Ramirez;A. Goez;B. Casas;I. Vails;R. Martinez;et al
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
30.Determination of Mechanical and Fatigue Properties of HVOF-Sprayed Coatings

机译：HVOF喷涂涂层的机械和疲劳性能的测定
- 作者：J. Spatzier;L.-M. Berger;K. Lipp
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- Thermal spray;
- HVOF;
- hardmetal coatings;
- mechanical properties;
- WC-17Co;
- Cr_3C_2-25NiCr;
31.Slurry Erosion Resistance of Cr_3C_2-Ni Cermets

机译：Cr_3C_2-Ni金属陶瓷的耐浆蚀性
- 作者：Kristjan Juhani;Juri Pirso;Mart Viljus
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
32.Optimised Sintering and Grain-Growth Inhibition of Ultrafine and Near-Nano Hardmetals

机译：优化的超细和近纳米硬质合金的烧结和晶粒长大抑制
- 作者：M. Brieseck;I. Hunsche;B. Caspers;B. Szesny;G. Gille;et al
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
33.Comparison of Different Cemented Tungsten Carbides Applied to Particleboard Machining End Mills

机译：刨花板加工立铣刀中使用不同硬质合金的比较
- 作者：F. Jorge Lino;Joao Guimaraes;Luis Teixeira;A. Monteiro Baptista;Tiago Fernandes;et al
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- Tungsten carbide;
- grain size;
- binder content;
- wear;
- machining;
- particleboards;
34.AE Monitoring of Microdamage during Flexural Fracture of Cermets

机译：金属陶瓷弯曲断裂过程中的AE微损伤监测
- 作者：Kenjiro YAMADA;Shuichi WAKAYAMA
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
35.Performance and Failure of Carbide Composites in Different Wear Conditions

机译：不同磨损条件下硬质合金复合材料的性能和失效
- 作者：Heinrich Klaasen;Tonu Roosaar;Jakob Kubarsepp;Aleksei Tsinjan
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- cermet;
- hardmetal;
- carbide composite;
- blanking performance;
- abrasive wear;
- adhesive wear;
- sliding wear;
36.Analysis of ASTM399 Fracture Toughness Testing of Diamond Impregnated Co Matrix

机译：金刚石浸渍Co基体的ASTM399断裂韧性测试分析
- 作者：James D. Dwan
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
37.Cemented Carbides with a Non-Toxic Binder Fe-Mn

机译：无毒粘结剂Fe-Mn硬质合金
- 作者：Dariusz Siemiaszko;Marcin Rosihski;Andrzej Michalski
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
38.Novel Current Induced Short-Time Sintering Processes for the Production of Diamond Tools

机译：用于金刚石工具生产的新型电流感应短时烧结工艺
- 作者：W. Tillmann;C. Kronholz;M. Ferreira
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
39.Diamond FGMs for Application in Cutting Tools

机译：金刚石FGM用于切削工具
- 作者：Marcin Rozmus;Lucyna Jaworska;Andrzej Kalinka
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- diamond;
- FGM;
- cutting tool material;
- compaction;
- centrifugal method;
- microstructure;
40.Powder Extrusion Moulding of Stainless Steel Thin-Tubes for Porous Metal-Supported SOFCs

机译：用于多孔金属支撑的SOFC的不锈钢细管的粉末挤出成型
- 作者：M. E. Sotomayor;B. Levenfeld;A. Varez
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
41.FeTi-AI-Ni Nanocrystalline Powders for Hydrogen Storage Obtained by Reactive Mechanical Alloying

机译：反应性机械合金化制氢用FeTi-Al-Ni纳米晶粉
- 作者：Radu L. Orban;Mariana Lucaci;Nicolae Jumate;Magdalena Orban
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
42.Soft Magnetic Materials on the Base of Crystalline and Nanocrystalline Iron Powders

机译：晶体和纳米晶铁粉的软磁材料
- 作者：Maslyuk V. A;Panasyuk O. A.;Vlasova O. V.;Napara-Volgina S. G.;Kurovskiy V. Ya.
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
43.Study about Activated Sintering of Pseudoalloys Based on Tungsten Powder

机译：基于钨粉的伪合金活性烧结研究
- 作者：D.Sc.Eng. Cristina lleana Pascu;D.Sc. Eng. loan Vida-Simiti
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
44.Magnetic Properties of Sintered FeNi and NiFeCuMo Alloys Using Mixed Powders

机译：混合粉末烧结FeNi和NiFeCuMo合金的磁性能
- 作者：Daniel Rodrigues;Gilberto Vicente Concilio;Bruno Ferreira Antunes
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
45.The Influence of the Kind of Powder on Physical Properties of Soft Magnetic Composites

机译：粉末种类对软磁复合材料物理性能的影响
- 作者：Barbara Slusarek;Marek Przybylski
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
46.Magnetic Characterization of Powder Metallurgy Austenitic Stainless Steels Sintered in Nitrogen Atmosphere

机译：氮气氛下烧结粉末冶金奥氏体不锈钢的磁特性
- 作者：C. Garcia;F. Martin;Y. Blanco
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
47.Research Regarding the Wear Behavior of Carbon Steels Obtained through Carburizing and Sintering of the Iron Powder

机译：通过铁粉的渗碳和烧结获得的碳钢的磨损行为的研究
- 作者：GHERMEC C;GHERMEC O.;CIUPITU I.;BUCSE G.
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
48.Sintering Atmosphere and Annealing Heat Treatment Effects on the Microstructure of PM Duplex Stainless Steels

机译：烧结气氛和退火热处理对PM双相不锈钢组织的影响
- 作者：C. Garcia;F. Martin;Y. Blanco
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
49.Reduced Sintering Temperature Creates New Opportunities for PM Stainless Steel Exhaust Components

机译：降低的烧结温度为PM不锈钢排气组件创造了新的机会
- 作者：Owe Mars;Sten Pierre Millot;Prasan K. Samal
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
50.Comparative Study of Hardenability and Mechanical Properties of Sinterhardening PM Low Alloy Steels

机译：烧结硬化粉末冶金低合金钢的淬透性和力学性能的比较研究
- 作者：F. Castro;S. Sainz;S. Saccarola
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
51.Achievable Properties after Different Heat Treatments of PM Steels

机译：PM钢不同热处理后可获得的性能
- 作者：Bjorn Lindqvist;Sven Bengtsson;Sigurd Berg
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
52.Heat Treatment and Fatigue Behavior of PM Steels: Guidelines from MPIF Standard # 35

机译：PM钢的热处理和疲劳行为：MPIF标准＃35中的准则
- 作者：Gian Filippo Bocchini
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- Fatigue;
- Powder Metallurgy;
- Property;
- Sintering;
- Strength;
53.Improved Mechanical Properties of Fe-Cr-Mo-Cu Steels via Microstructure Modification

机译：通过微结构改性改善Fe-Cr-Mo- Cu钢的力学性能
- 作者：Marco Actis-Grande;Eva Dudrova;Margita Kabatova;Robert Bidulsky;Mario Rosso
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
- Fe-Cr-Mo-Cu sintered steels;
- mechanical properties;
- microstructure;
- fractography;
54.Research Regarding the Tribologic Behavior of Low-Alloyed Steels based upon Master Alloys

机译：基于中间合金的低合金钢的摩擦学性能研究
- 作者：lonela Gabriela BUCSE;Cristian GHERMEC;Olimpia GHERMEC;Marius CRIVEANU
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
55.The Tribological Comportment of the Elaborated Sintered Carbon Steels Based on Fe and Fe_3C Synthetic Nanopowders

机译：基于Fe和Fe_3C合成纳米粉的精细烧结碳钢的摩擦学研究
- 作者：Mariana CIOBANU;Ion CIUPITU;Mann DIDU;Stefan RADU;lulian STEFAN
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
56.Effect of Sharp Notches on the Fatigue Behaviour of a 4 Ni Diffusion-Alloyed Steel

机译：尖锐缺口对4％Ni扩散合金钢疲劳行为的影响
- 作者：K. Lipp;P. Beiss;D. Hofferberth;A. Zafari
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
57.Fatigue Strength of Heat-Treated Fe-Cu-C Steels with Sharply Notched Specimens

机译：尖锐试样的热处理Fe-Cu-C钢的疲劳强度
- 作者：A. Zafari;P. Beiss
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
58.Rolling Contact Fatigue and its Density Dependence without Slip of a Low Cost PM Steel

机译：低成本永磁钢的滚动接触疲劳及其密度依赖性
- 作者：Thomas Janitzky;Paul Beiss
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
59.Effect of Machining Enhancer Additions on Static and Dynamic Properties of FD-0405 and FD-0408 Materials

机译：机械加工增强剂的添加对FD-0405和FD-0408材料的静态和动态特性的影响
- 作者：Frangois Chagnon
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
60.Electrical Conductivity and Microstructural Changes of Sintered Plain Carbon Steels Prepared from Different Base Powders

机译：不同基础粉末制备的普通碳素钢的电导率和组织变化
- 作者：Mohammad Moment;Christian Gierl;Herbert Danninger
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
61.Development and Manufacture of Brazed Sintered Part for Wear Resistant Application

机译：耐磨应用钎焊烧结零件的开发与制造
- 作者：LarsNyborg;Henrik Borgstrom;Peter Sotkovszki;Jan-Olof Krona;Sven Bengtsson;et al
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
62.Microstructure and Impact Properties of Low Alloy Sintered Steels

机译：低合金烧结钢的组织和冲击性能
- 作者：E. Santuliana;A. Molinari
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
63.Means to Improve Machinability of Sintered Steels

机译：改善烧结钢可加工性的方法
- 作者：Olof Andersson;Mats Larsson
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
64.Numerical Analysis of Stress Concentration Factors in Notched Specimens According to ISO 3928

机译：根据ISO 3928的缺口试样中应力集中因素的数值分析
- 作者：A. L. Chueca;K. Sauerzapfe;C. Broeckmann;P. Beiss;K. Lipp;et al
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年
65.Self Lubricating Sintered Steels with High Mechanical Resistance Obtained via in situ Formation of Solid Lubricant Particles during Sintering

机译：通过在烧结过程中原位形成固体润滑剂颗粒获得具有高机械阻力的自润滑烧结钢
- 作者：Aloisio N. Klein;Cristiano Binder;Gisele Hammes;Jose Daniel B. de Mello;Waldyr Ristow Jr;et al
- 会议名称：《International powder metallurgy congress exhibition;EURO PM2009;PM2009》 | 2009年