首页>外文会议>International specialty conference on cold-formed steel structures

International specialty conference on cold-formed steel structures

召开年：2008
召开地：St. Louis, MO(US)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Test Standard for Joist Connectors Attached to Cold-Formed Steel Framing

机译：连接到冷弯型钢框架上的托梁连接器的测试标准
- 作者：Greg Greenlee
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
2.New Test Standard for Hold-downs Attached to Cold-Formed Steel Structural Framing

机译：用于冷弯钢结构框架的压紧件的新测试标准
- 作者：Jeff Ellis
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
3.Behavior of Arc Spot Weld Connections Subjected to Combined Shear and Tension Forces

机译：剪切力和拉力共同作用下的电弧点焊连接行为
- 作者：L. K. Stirnemann;R. A. LaBoube
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
4.Overview of the Standard for Seismic Design of Cold-Formed Steel Structural Systems - Special Bolted Moment Frames

机译：冷弯钢结构系统抗震设计标准概述-特殊螺栓矩框架
- 作者：Helen Chen;Chia-Ming Uang;Reidar Bjorhovde;Bonnie Manley
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
5.Buckling Studies of Thin-Walled Channel Sections under Combined Bending and Shear

机译：组合弯剪作用下薄壁通道截面的屈曲研究
- 作者：Cao Hung Pham;Gregory J. Hancock
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
6.Experimental Study on Web Crippling of Lapped Cold-Formed Steel Channels Subjected To Interior Two-Flange Loading

机译：内两翼荷载作用下冷弯型钢通道腹板卷缩的试验研究
- 作者：Q. Rahman;K. Sennah;S. Fox
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
7.Simplified models for cross-section stress demands on C-section purlins in uplift

机译：隆起剖腹产pur条的横截面应力需求的简化模型
- 作者：L.C.M. Vieira Jr.;M. Malite;B.W. Schafer
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
8.Flexural Resistance of Cold-formed Steel Built-Up Box Sections Subjected to Eccentric Loading

机译：偏心载荷作用下冷弯型钢组合箱截面的抗弯强度
- 作者：L. Xu;P. Sultana
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
9.Web Crippling Behaviour of Thin-Walled Lipped Channel Beams Subjected to EOF and ETF Loading

机译：EOF和ETF载荷作用下薄壁唇形槽形梁的网络起伏行为
- 作者：Martin Macdonald;Manoj A. Heiyantuduwa;Jim Rhodes
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
10.Simplified Consideration of down-aisle stability in Pallet Racking

机译：托盘货架中过道稳定性的简化考虑
- 作者：J Rhodes;M. Macdonald
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
11.Response of Metal Roofs to Uniform Static and True Hurricane Wind Loads

机译：金属屋顶对均匀的静态和真实飓风风荷载的响应
- 作者：R. Ralph Sinno
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
12.State of the art report on thin-walled cold-formed profiled steel decking

机译：薄壁冷弯型钢地板的最新技术报告
- 作者：N.A.Hedaoo;L.M. Gupta;G.N. Ronghe;S.K.Parikh
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
13.Vibration Performance of Lightweight Floor Systems Supported by Cold-formed Steel Joists

机译：冷弯型钢托梁支撑的轻型地板系统的振动性能
- 作者：B.W. Davis;R. Parnell;L. Xu
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
14.Innovative Composite Cold Formed Steel Floor System

机译：创新的复合冷弯钢地板系统
- 作者：D.M. Fox;R.M. Schuster;M. Strickland
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
15.Flexural Behavior and Design of the New Built-up LiteSteel Beams

机译：新型组合式LiteSteel梁的弯曲行为和设计
- 作者：Sivapathasunderam Jeyaragan;Mahen Mahendran
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
16.Experimental and Numerical Studies of the Shear Behaviour of LiteSteel Beams

机译：LiteSteel梁的抗剪性能的实验和数值研究
- 作者：P. Keerthan;M. Mahendran
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
- shear behaviour;
- LiteSteel beams (LSB);
- cold-formed steel structures;
- slender web and hollow flanges;
17.Inelastic Performance and Design of CFS Walls Braced with Straps having Reduced Width Fuses

机译：宽度减小的保险丝支撑的CFS墙的非弹性性能和设计
- 作者：K. Velchev;G. Comeau;N. Balh;C.A. Rogers
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
18.Pilot Research on Cold-Formed Steel Framed Shear Wall Assemblies with Corrugated Sheet Steel Sheathing

机译：波纹钢板护套冷弯型钢框架剪力墙组件的中试研究
- 作者：Hitesh Vora;Cheng Yu
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
19.STRUCTURAL TESTING OF CORRUGATED SHEET STEEL SHEAR WALLS

机译：波纹钢板剪力墙的结构测试
- 作者：BOZIDAR STQJADINOVIC;STEVEN TIPPING
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
20.Shear Resistance of Cold-Formed Steel Framed Shear Wall Assemblies with 0.027-, 0.030-, 0.033-inch Sheet Steel Sheathing

机译：0.027英寸，0.030英寸，0.033英寸钢板护套的冷弯型钢框架剪力墙组件的抗剪强度
- 作者：Cheng Yu
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
21.Estimating the Effective Yield Strength of Cold-Formed Steel Light-Frame Shear Walls

机译：估计冷弯型钢轻型框架剪力墙的有效屈服强度
- 作者：Reynaud Serrette
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
22.Effect of Varied Imperfections on Bracing Demand of Cold- Formed Steel Stud Walls

机译：各种缺陷对冷弯钢钉壁支撑需求的影响
- 作者：Thomas Sputo;Kevin Beery;Edgar Wong
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
23.Finite Element Analytical Investigation of Torsional Bracing Requirements for Cold-Formed Steel C-Shaped Studs

机译：C型冷弯螺柱抗扭支撑要求的有限元分析
- 作者：Jennifer Tovar;Todd Helwig;Thomas Sputo
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
24.Floor system design for distortional buckling including sheathing restraint

机译：包括护套约束在内的变形屈曲的地板系统设计
- 作者：Schafer B.W.;Sangree R.H.;Guan Y.
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
25.Simplified Methods for Predicting Elastic Buckling of Cold-Formed Steel Structural Members with Holes

机译：带有孔的冷弯钢结构构件弹性屈曲的简化预测方法
- 作者：Cristopher D. Moen;B.W. Schafer
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
26.Generalized Beam Theory Formulation Able to Capture Load Application and Localized Web Buckling Effects

机译：广义梁理论公式能够捕获载荷应用和局部腹板屈曲效应
- 作者：Nuno M.F. Silva;Dinar Camotim;Nuno Silvestre
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
27.GBTUL - A Code for the Buckling Analysis of Cold-Formed Steel Members

机译：GBTUL-冷弯型钢构件屈曲分析规范
- 作者：Rui Bebiano;Nuno Silvestre;Dinar Camotim
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
28.Impact of global flexural imperfections on the cold-formed steel column curve

机译：整体弯曲缺陷对冷弯钢柱曲线的影响
- 作者：Schafer B.W.;Zeinoddini V.M.
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
29.Computed Flexural Buckling Stress for Cold-Formed Stainless Steel Columns

机译：冷弯不锈钢柱的计算弯曲屈曲应力
- 作者：Shin-Hua Lin;Chi-Ling Pan;Chin-Peng Yu
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
- cold-formed;
- stainless steel;
- column;
- specification;
- tangent modulus;
- flexural buckling;
- approximation;
30.STABILITY OF COLD-FORMED STEEL SIMPLE AND LIPPED ANGLES UNDER COMPRESSION

机译：压缩状态下冷弯型钢和倾角的稳定性
- 作者：W. F. Maia;J. Munaiar Neto;M. Malite
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
31.Structural Analysis of Scaffolding with Plank and Anchor Rod during Construction

机译：木板与锚杆脚手架施工过程中的结构分析
- 作者：Jui-Lin Peng;Chi-Ling Pan;Kuan-Hung Chen;Siu-Lai Chan
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
32.What's New in the 2007 Edition of the North American Cold-Formed Steel Specification?

机译：2007年版的北美冷弯钢规范中有哪些新增内容？
- 作者：Roger Brockenbrough;Reinhold Schuster;Roger LaBoube;Helen Chen
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
33.An Update on AISI Standards for Cold-Formed Steel Framing

机译：AISI冷弯型钢框架的标准更新
- 作者：Jay W. Larson
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
34.STRENGTH OF COLD-FORMED STEEL JAMB STUD-TO- TRACK CONNECTIONS

机译：冷弯型钢爪柱到轨连接的强度
- 作者：A.V. Lewis;S.R. Fox;R.M. Schuster
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
35.Thermal Performance of Plasterboard Lined Steel Stud Walls

机译：石膏板内衬钢钉墙的热性能
- 作者：Prakash N. Kolarkar;Mahen Mahendran
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
- non-load-bearing walls;
- gypsum plasterboard;
- cold-formed steel wall frames;
- fire tests;
- thermal performance;
- insulation;
- fire rating;
36.TESTING AND EVALUATION OF CFS L-HEADERS

机译：CFS L-Header的测试和评估
- 作者：J. Pauls;L. Xu;S. Fox
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
37.Effects of elevated temperatures on ultimate moment capacity of bolted moment-connections between cold-formed steel members

机译：高温对冷弯型钢构件螺栓弯矩连接极限弯矩承载力的影响
- 作者：James B.P. Lim;Ben Young
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
38.Cold-Formed Steel Special Bolted Moment Frames: Cyclic Testing and Numerical Modeling of Moment Connections

机译：冷弯型钢特殊螺栓矩框架：矩矩连接的循环测试和数值建模
- 作者：Chia-Ming Uang;Jong-Kook Hong;Atsushi Sato;Ken Wood
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
39.Cold-Formed Steel Special Bolted Moment Frames: Capacity Design Requirements

机译：冷弯型钢特殊螺栓矩框架：容量设计要求
- 作者：Atsushi Sato;Chia-Ming Uang
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
40.Cold-formed steel portal frame joints: a review

机译：冷弯型钢门框式接头的评论
- 作者：A.M. Wrzesien;J.B.P. Lim
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
41.Strength of Arc Spot Welds made in Single and Multiple Steel Sheets

机译：单层或多层钢板制成的电弧点焊的强度
- 作者：Gregory L. Snow;W. Samuel Easterling
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
42.Cold-Formed Steel Bolted Connections without Washers on Oversized Holes: Shear and Bearing Failures in Sheets

机译：在大孔上不带垫圈的冷弯钢螺栓连接：板材的剪切和轴承失效
- 作者：Cheng Yu;Ibraheem Sheerah
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
43.Experimental response of connections between cold-formed steel profile and cement-based panel

机译：冷弯型钢与水泥板连接的实验响应
- 作者：Luigi Fiorino;Omella Iuorio;Raffaele Landolfo
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
44.Flexural Resistance of Cold-formed Steel Built-Up Box Sections Subjected to Eccentric Loading

机译：经受偏心载荷的冷成型钢的抗弯曲电阻
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
45.STABILITY OF COLD-FORMED STEEL SIMPLE AND LIPPED ANGLES UNDER COMPRESSION

机译：压缩下冷成型钢的稳定性和锁定角度
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
46.Simplified Methods for Predicting Elastic Buckling of Cold-Formed Steel Structural Members with Holes

机译：简化方法，用于预测具有孔的冷成型钢结构构件的弹性屈曲
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
47.Buckling Studies of Thin-Walled Channel Sections under Combined Bending and Shear

机译：组合弯曲和剪切下薄壁通道部分的屈曲研究
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
48.TESTING AND EVALUATION OF CFS L-HEADERS

机译：CFS L-eaders的测试和评估
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
49.Test Standard for Joist Connectors Attached to Cold-Formed Steel Framing

机译：托梁连接器的测试标准连接到冷成型钢框架
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
50.Simplified Consideration of down-aisle stability in Pallet Racking

机译：简化了托盘架中脱洞稳定性的考虑
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
51.STRUCTURAL TESTING OF CORRUGATED SHEET STEEL SHEAR WALLS

机译：波纹板钢剪力墙的结构测试
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
52.Effects of elevated temperatures on ultimate moment capacity of bolted moment-connections between cold-formed steel members

机译：升高温度对冷成型钢构件螺栓矩形连接极限力矩的影响
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
53.Overview of the Standard for Seismic Design of Cold-Formed Steel Structural Systems - Special Bolted Moment Frames

机译：冷成型钢结构系统地震设计标准概述 - 特殊用螺栓力矩框架
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
54.Impact of global flexural imperfections on the cold-formed steel column curve

机译：全球弯曲缺陷对冷成型钢柱曲线的影响
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
55.Thermal Performance of Plasterboard Lined Steel Stud Walls

机译：石膏板衬里钢螺柱墙的热性能
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
- non-load-bearing walls;
- gypsum plasterboard;
- cold-formed steel wall frames;
- fire tests;
- thermal performance;
- insulation;
- fire rating;
56.Experimental Study on Web Crippling of Lapped Cold-Formed Steel Channels Subjected To Interior Two-Flange Loading

机译：内部双法兰载荷覆盖冷成型钢通道网纤维的试验研究
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
57.Experimental and Numerical Studies of the Shear Behaviour of LiteSteel Beams

机译：LiteSteel梁剪切行为的实验与数值研究
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
- shear behaviour;
- LiteSteel beams (LSB);
- cold-formed steel structures;
- slender web and hollow flanges;
58.Estimating the Effective Yield Strength of Cold-Formed Steel Light-Frame Shear Walls

机译：估算冷成型钢光框剪力墙的有效屈服强度
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
59.Innovative Composite Cold Formed Steel Floor System

机译：创新复合冷成型钢制地板系统
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
60.Response of Metal Roofs to Uniform Static and True Hurricane Wind Loads

机译：金属屋顶对均匀静态和真正的飓风风荷载的反应
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
61.Vibration Performance of Lightweight Floor Systems Supported by Cold-formed Steel Joists

机译：冷成型钢托梁支撑轻质楼层系统的振动性能
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
62.Generalized Beam Theory Formulation Able to Capture Load Application and Localized Web Buckling Effects

机译：广义光束理论配方能够捕获负载应用和局部Web屈曲效果
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
63.Experimental response of connections between cold-formed steel profile and cement-based panel

机译：冷成型钢型材和基于水泥基板的连接的实验响应
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
64.Flexural Behavior and Design of the New Built-up LiteSteel Beams

机译：新型建筑LITESTEEL梁的弯曲行为和设计
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
65.Cold-Formed Steel Special Bolted Moment Frames: Capacity Design Requirements

机译：冷成型钢特殊用螺栓电视框架：容量设计要求
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
66.State of the art report on thin-walled cold-formed profiled steel decking

机译：关于薄壁冷成型钢板装饰的最新报告
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
67.GBTUL - A Code for the Buckling Analysis of Cold-Formed Steel Members

机译：GBTUL - 冷成型钢构件屈曲分析的代码
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
68.Computed Flexural Buckling Stress for Cold-Formed Stainless Steel Columns

机译：用于冷成型不锈钢柱的计算弯曲屈曲应力
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
- cold-formed;
- stainless steel;
- column;
- specification;
- tangent modulus;
- flexural buckling;
- approximation;
69.Strength of Arc Spot Welds made in Single and Multiple Steel Sheets

机译：单钢板和多钢板制造的弧度焊缝强度
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
70.An Update on AISI Standards for Cold-Formed Steel Framing

机译：关于冷成型钢框架AISI标准的更新
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
71.Floor system design for distortional buckling including sheathing restraint

机译：落地系统设计扭曲屈曲，包括护套束缚
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
72.Web Crippling Behaviour of Thin-Walled Lipped Channel Beams Subjected to EOF and ETF Loading

机译：薄壁锁定通道梁的WEB跨性行为经过EOF和ETF负载
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
73.Simplified models for cross-section stress demands on C-section purlins in uplift

机译：横截面压力要求对隆起中的C型紫板的简化模型
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
74.Finite Element Analytical Investigation of Torsional Bracing Requirements for Cold-Formed Steel C-Shaped Studs

机译：冷成型钢C形螺柱扭转支撑要求有限元分析研究
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
75.Inelastic Performance and Design of CFS Walls Braced with Straps having Reduced Width Fuses

机译：CFS墙壁的无弹性性能和设计，带有减小宽度熔断器的带子
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
76.New Test Standard for Hold-downs Attached to Cold-Formed Steel Structural Framing

机译：用于冷成型钢结构框架的倒塌的新测试标准
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
77.Pilot Research on Cold-Formed Steel Framed Shear Wall Assemblies with Corrugated Sheet Steel Sheathing

机译：带瓦楞板钢护套的冷成型钢框架剪力墙组件的试验研究
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
78.Structural Analysis of Scaffolding with Plank and Anchor Rod during Construction

机译：用施工过程中木板和锚杆脚手架的结构分析
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
79.Cold-Formed Steel Bolted Connections without Washers on Oversized Holes: Shear and Bearing Failures in Sheets

机译：冷成型钢螺栓连接，无垫圈上的过孔孔：剪切和轴承纸张
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
80.Effect of Varied Imperfections on Bracing Demand of Cold- Formed Steel Stud Walls

机译：不同缺陷对冷成型钢壁支撑需求的影响
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
81.What's New in the 2007 Edition of the North American Cold-Formed Steel Specification?

机译：2007年版北美冷成型钢规格的新型是什么？
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
82.Behavior of Arc Spot Weld Connections Subjected to Combined Shear and Tension Forces

机译：弧度焊接连接的行为经受组合剪切和张力
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
83.STRENGTH OF COLD-FORMED STEEL JAMB STUD-TO- TRACK CONNECTIONS

机译：冷成型钢夹板螺栓的强度 - 跟踪连接
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
84.Cold-formed steel portal frame joints: a review

机译：冷成型钢门式框架关节：综述
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
85.Shear Resistance of Cold-Formed Steel Framed Shear Wall Assemblies with 0.027-, 0.030-, 0.033-inch Sheet Steel Sheathing

机译：冷成型钢框架剪力墙组件的剪切电阻，0.027-，0.030-，0.033英寸钢板护套
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
86.Cold-Formed Steel Special Bolted Moment Frames: Cyclic Testing and Numerical Modeling of Moment Connections

机译：冷成型钢特殊用螺栓电视框架：循环测试和时刻连接的数值建模
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2008年
87.COMPARATIVE BEHAVIOR OF BUILT-UP COLD- FORMED BOX SECTIONS UNDER RIGID AND FLEXIBLE END SUPPORT CONDITIONS

机译：刚性和灵活的最终支撑条件下建筑冷成型箱段的比较行为
- 作者：W. Reyes;F.A. Guzman
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
- Built-up section;
- modified slenderness ratio;
- axial strength;
88.THEORETICAL ANALYSIS OF COLD-FORMED STEEL BATTENED DOUBLE ANGLE MEMBERS UNDER COMPRESSION

机译：压缩下冷成型钢双角构件的理论分析
- 作者：W. F. Maia;J. Munaiar Neto;M. Malite
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
89.A Life-Cycle Assessment of Cold-Formed Steel Enclosures verses Alternative Enclosures in Commercial Buildings

机译：冷成型钢制外壳的生命周期评估经文商业建筑中的替代外壳
- 作者：K. J. Van Ooteghem;L. Xu
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
90.Extending Direct Strength Design to Cold-Formed Steel Beams with Holes

机译：用孔向冷成型钢梁延伸直接强度设计
- 作者：Cristopher D. Moen;Benjamin W. Schafer
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
91.FEASIBILITY STUDY FOR A REPETITIVE MEMBER FACTOR FOR COLD-FORMED STEEL FRAMING SYSTEMS

机译：用于冷成型钢制系统的重复成员因子的可行性研究
- 作者：S. Clayton;S.F. Stephens
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
92.Single Shear Bolted Connection tests of G500 1.20mm Thin Sheet Steel at Elevated Temperatures

机译：升高温度下G500 1.20mm薄板钢的单剪切螺栓连接试验
- 作者：Shu Yan;Ben Young
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
93.Cross-aisle Shear Stiffness Tests on Rack Upright Frames

机译：机架直立框架上的交叉过道剪切刚度测试
- 作者：S.R. Sajja;R.G. Beale;M.H.R. Godley
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
94.Experimental Investigation of Optimized Cold-Formed Steel Compression Members

机译：优化冷成型钢压缩构件的实验研究
- 作者：D.J. Klingshirn;E.A. Sumner;N.A. Rahman
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
95.Shear Behaviors of Light-gauge Composite Walls under Monotonic and Cyclic Loading

机译：单调和循环载荷下轻型复合墙的剪切行为
- 作者：Yuanqi LI;Fei LIU;Zuyan SHEN
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
96.Lateral torsional instability of single channels restrained by angle cleats

机译：单个通道的横向扭转不稳定性受角度夹板限制
- 作者：G.M. Bukasa
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
97.Evaluating the LRFD Resistance Factor for Cold-Formed Steel Compression Members

机译：评估冷成型钢压缩构件的LRFD电阻因子
- 作者：Karthik Ganesan;Cristopher D. Moen
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
98.Direct Strength Design of Cold-Formed C-Sections for Shear

机译：用于剪切的冷成型C段的直接强度设计
- 作者：Cao Hung Pham;Gregory J. Hancock
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
99.On the Direct Strength Design of Continuous Cold-Formed Steel Beams

机译：关于连续冷成型钢梁的直接强度设计
- 作者：Cilmar Basaglia;Dinar Camotim
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年
100.STUDY ON THE BEHAVIOUR OF COLD-FORMED STEEL ANGLE TENSION MEMBERS

机译：冷成型钢角张力构件的行为研究
- 作者：R.PadmaPriya;Dr.S.Kandasamy
- 会议名称：《International specialty conference on cold-formed steel structures》 | 2010年