首页>外文会议>其他>2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation

2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Test of microwave absorber of rice husk and burned rice husk

机译：稻壳和烧过的稻壳的微波吸收剂测试
- 作者：Mohammad Basuki Rahmat;Afif Zuhri Arfianto;Eko Setijadi;Ahmad Mauludiyanto
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Antenna measurements;
- Microwave theory and techniques;
- Microwave measurement;
- Permittivity;
- Absorption;
- Horn antennas;
- Electromagnetic heating;
2.Control of robot arm based on speech recognition using Mel-Frequency Cepstrum Coefficients (MFCC) and K-Nearest Neighbors (KNN) method

机译：利用Mel倒谱系数（MFCC）和K最近邻（KNN）方法基于语音识别的机械臂控制
- 作者：Dyah Anggraeni;W. S. Mada Sanjaya;Madinatul Munawwaroh;M. Yusuf Solih Nurasyidiek;Ikhsan Purnama Santika
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Speech recognition;
- Manipulators;
- Mel frequency cepstral coefficient;
- Databases;
- Feature extraction;
- Cepstrum;
3.A self-learning TS-fuzzy system based on the C-means clustering technique for controlling the altitude of a hexacopter unmanned aerial vehicle

机译：基于C均值聚类技术的自学习TS模糊系统，用于控制六直升机无人机的高度
- 作者：Fendy Santoso;Matthew A. Garratt;Sreenatha G. Anavatti
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Rotors;
- Drones;
- Blades;
- Control systems;
- Fuzzy logic;
- Aircraft;
- Mathematical model;
4.Design and simulation of synchronous generator excitation system using buck converter at motor generator trainer model LEM-MGS

机译：LEM-MGS型电动教练机中使用降压转换器的同步发电机励磁系统的设计与仿真
- 作者：Rifdian Indrianto Sudjoko;Purwadi Agus Darwito
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Voltage control;
- Buck converters;
- Synchronous generators;
- Windings;
- Inductors;
- Rotors;
5.Comparison method of MPSO, FPA, and GWO algorithm in MPPT SEPIC converter under dynamic partial shading condition

机译：动态局部阴影条件下MPPT SEPIC转换器中MPSO，FPA和GWO算法的比较方法
- 作者：Farid Dwi Murdianto;Moh. Zaenal Efendi;Rangga Eka Setiawan;Alfis Syah Laili Hermawan
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Maximum power point trackers;
- Particle swarm optimization;
- Simulation;
- Optimization;
- Mathematical model;
- Heuristic algorithms;
6.Symbiotic organisms search with the feasibility-based rules for constrained engineering design optimization

机译：共生生物搜索基于可行性的规则以进行受限的工程设计优化
- 作者：Doddy Prayogo;Min-Yuan Cheng
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Organisms;
- Ecosystems;
- Symbiosis;
- Welding;
- Linear programming;
- Design optimization;
7.Design of marine cable installation for ocean current power plant in Toyopakeh Strait-Bali

机译：Toyopakeh Strait-Bali洋流发电厂的船用电缆安装设计
- 作者：Adi Kurniawan;Mira Yosi;Irfan Syarif Arief;Danang Cahyagi
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Underwater cables;
- Mathematical model;
- Stability criteria;
- Oceans;
- Conductors;
- Power cables;
8.Virtual Sasando using leap motion controller

机译：使用跳跃运动控制器的虚拟Sasando
- 作者：Ridho Rahman Hariadi;Darlis Herumurti;Anny Yuniarti;Imam Kuswardayan;Nanik Suciati;Tikva Mooy
- 会议名称：《》 | 2017年
- Instruments;
- Music;
- Thumb;
- Three-dimensional displays;
- Solid modeling;
- Tutorials;
9.Determination of location and numbers of tram stops in Surabaya with model set covering problem

机译：用模型覆盖问题确定泗水电车站的位置和数量
- 作者：Andika Ardiansyah;Mardlijah
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Mathematical model;
- Transportation;
- Linear programming;
- Government;
- Switched mode power supplies;
- Syntactics;
- Urban areas;
10.Modeling and analysis the effect of orifice area variation to the dynamic response of hydro electro mechanic shock absorber (HEMS A)-double cylinder

机译：建模和分析孔面积变化对水力机电减震器（HEMS A）-双缸动力响应的影响
- 作者：Harus Laksana Guntur;Yosefa Amelia Aishi
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Automobiles;
- Orifices;
- Gears;
- Hydraulic systems;
- Damping;
- Mathematical model;
- Suspensions;
11.Distance control panel for mini amphibious robot

机译：小型两栖机器人的距离控制面板
- 作者：Prili Vanindya Dinda Utami;Agung Nugroho Jati;Casi Setianingsih
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Robot kinematics;
- Wireless fidelity;
- Graphical user interfaces;
- Cameras;
- IP networks;
- Control systems;
12.Titanium dioxide (TiO2) and silver chloride (AgCl)-based pH sensor using spin coating method

机译：采用旋涂法的二氧化钛（TiO 2 ）和氯化银（AgCl）基pH传感器
- 作者：Eka Maulana;Nainaufal Hidayah;Onny Setyawati
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Electrodes;
- Uncertainty;
- Linearity;
- Testing;
- Sensitivity;
- Measurement uncertainty;
- Scanning electron microscopy;
13.Design of sensor fault tolerant control system on variable speed wind turbine

机译：变速风力发电机传感器容错控制系统设计
- 作者：Katherin Indriawati;Ali Musyafa;Bambang L Widjiantoro
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Wind turbines;
- Generators;
- Observers;
- Control systems;
- Wind speed;
- Mathematical model;
- Robustness;
14.Quadrotors distribution controlling for swarm centroid detection using a modified artificial neural network self-organizing map (Modified ANN-SOM)

机译：使用改进的人工神经网络自组织映射（Modified ANN-SOM）的群体转子质心检测的四旋翼分布控制
- 作者：Albert Sudaryanto;Rusdhianto Efendie Abdul Kadier;Achmad Jazidie
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Self-organizing feature maps;
- Training;
- Genetic algorithms;
- Mathematical model;
- Optimization;
- Particle swarm optimization;
15.AM-BO: Single propulsive method amphibious robot

机译：AM-BO：单推进方法两栖机器人
- 作者：Raafi Dwi Susanto;Agung Nugroho Jati;Casi Setianingsih
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Wheels;
- Mobile robots;
- Torque;
- DC motors;
- Gears;
- Land surface;
16.A technique to track maximum power-point of grid-connected single-stage inverter photovoltaic system

机译：跟踪并网单级逆变器光伏系统最大功率点的技术
- 作者：Irwan Purnama;Fajar Budi Utomo;Pei-Chin Chi;Yao-Ching Hsieh;Jing-Yuan Lin;Huang Jen Chiu
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Inverters;
- Capacitors;
- Photovoltaic systems;
- Maximum power point trackers;
- Control systems;
- Mathematical model;
- Impedance;
17.Development of wavelet transforms to predict methane in chili using the electronic nose

机译：利用电子鼻开发小波变换以预测辣椒中的甲烷
- 作者：Shoffi Izza Sabilla;Riyanarto Sarno
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Support vector machines;
- Discrete wavelet transforms;
- Methane;
- Fast Fourier transforms;
- Feature extraction;
18.iARTour for Indonesia tourism object

机译：iARTour for Indonesia旅游对象
- 作者：Darlis Herumurti;Ridho Rahman Hariadi;Imam Kuswardayan;Anny Yuniarti;Nanik Suciati;Siska Arifiani
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Three-dimensional displays;
- Solid modeling;
- Text recognition;
- Media;
- Hypertext systems;
- Augmented reality;
- Cameras;
19.Motion type of 3-RPS parallel manipulator for ankle rehabilitation device

机译：脚踝康复器的3-RPS并联机械手的运动类型
- 作者：Latifah Nurahmi;Mochamad Solichin
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Manipulators;
- Azimuth;
- Joints;
- Legged locomotion;
- Trajectory;
- Computer architecture;
- Mechatronics;
20.Prototyping a beneficial PC-based woodworking CNC machine WCM500 for creative industries

机译：为创意产业设计基于PC的有益PC木工数控机床WCM500的原型
- 作者：Wahyu Abdi Wibowo;Tito Bagaswara;Hendro Nurhadi
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Pins;
- Wiring;
- Testing;
- Software;
- AC motors;
- Machining;
- Control systems;
21.Nearest neighbour based task allocation with multi-agent path planning in dynamic environments

机译：动态环境中具有多智能体路径规划的基于最近邻居的任务分配
- 作者：Sumana Biswas;Sreenatha G. Anavatti;Matthew A. Garratt
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Task analysis;
- Path planning;
- Resource management;
- Planning;
- Autonomous agents;
- Collision avoidance;
- Particle swarm optimization;
22.Online dynamic set point weighting PID controller for remote controlled weapon station cal. 12.7 mm

机译：在线动态设定点加权PID控制器，用于遥控武器站校准。 12.7毫米
- 作者：Bill Febrian Winoto;Hendro Nurhadi;Bambang Pramujati
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Steady-state;
- Weapons;
- Azimuth;
- Tuning;
- Vehicle dynamics;
- Robots;
- Aerospace electronics;
23.A data hiding approach using enhanced-RDE in grayscale images

机译：在灰度图像中使用增强RDE的数据隐藏方法
- 作者：Pascal Maniriho;Tohari Ahmad
- 会议名称：《》 | 2017年
- Media;
- Discrete cosine transforms;
- Digital images;
- Security;
- Image restoration;
- Gray-scale;
- Informatics;
24.A study of energy consumption in battery/super capacitor hybrid system based on optimized driving strategy

机译：基于优化驱动策略的电池/超级电容器混合动力系统能耗研究
- 作者：Bonhyun Gu;Suk Won Cha
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Batteries;
- Capacitors;
- State of charge;
- Hybrid electric vehicles;
- Mechanical power transmission;
- Hybrid power systems;
- Dynamic programming;
25.Analysis of unbalanced load effect of three phase transformer feedback 61-103 performance on the various connection windings

机译：三相变压器反馈61-103性能对各种连接绕组的不平衡负载影响分析
- 作者：Sardono Sarwito;Semin;Muhammad Hanif
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Phase transformers;
- Windings;
- Power transformers;
- Current transformers;
- Voltage control;
- Oil insulation;
- Marine vehicles;
26.Sliding mode control as controller for remote control weapon station 12.7mm (RCWS)

机译：滑模控制作为遥控武器站12.7mm（RCWS）的控制器
- 作者：Hans Kristian;Hendro Nurhadi;Bambang Pramujati
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Mathematical model;
- Sliding mode control;
- Azimuth;
- Jacobian matrices;
- Tuning;
- Response surface methodology;
- MIMO communication;
27.Comparison method of flower pollination algorithm, modified particle swarm optimization and perturb observe in MPPT coupled inductor sepic converter on DC microgrid isolated system

机译：直流微电网隔离系统上MPPT耦合电感式隔膜变换器中花授粉算法，改进粒子群算法和微扰与观测的比较方法
- 作者：Farid Dwi Murdianto;Alfis Syah Laili Hermawan;Ainur Rofiq Nansur;Rangga Eka Setiawan
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Radiation effects;
- Inductors;
- Convergence;
- Power generation;
- Mathematical model;
- Microgrids;
- Artificial intelligence;
28.Synthesis of Zn(OH)2nanoparticles using electrochemical method

机译：电化学法合成Zn（OH） 2 纳米粒子
- 作者：Bahrul Ulum;Fredy Kurniawan
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Nanoparticles;
- Electrochemical processes;
- Electric potential;
- Sodium;
- Zinc oxide;
29.Control design for direct-drive robotic ARM using sliding mode control

机译：使用滑模控制的直接驱动机器人ARM的控制设计
- 作者：Totok Soehartanto;Imil Fadli Imran;Latifatul Auniah Purwitosari
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Manipulators;
- Sliding mode control;
- Trajectory;
- Mathematical model;
- Lyapunov methods;
- Torque;
30.Review and comparison Of DC-DC converters for maximum power point tracking system in standalone photovoltaic (PV) module

机译：审查和比较用于独立光伏（PV）模块中最大功率点跟踪系统的DC-DC转换器
- 作者：Pressa P. Surya;Denny Irawan;Muhammad Zuhri
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- DC-DC power converters;
- Maximum power point trackers;
- Temperature;
- Photovoltaic systems;
- Switches;
31.Control of photovoltaic system connected to DC bus in all-electric ship

机译：全电船中连接到直流母线的光伏系统的控制
- 作者：Adi Kurniawan;Eiji Shintaku
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Marine vehicles;
- Voltage control;
- Maximum power point trackers;
- Mathematical model;
- Control systems;
- Generators;
- Voltage measurement;
32.Transient stability analysis of general cargo shipboard power system

机译：通用货船动力系统的暂态稳定性分析
- 作者：Indra Ranu Kusuma;Semin;M. Badrus Zaman;Edo Legowo
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Generators;
- Power system stability;
- Induction motors;
- Marine vehicles;
- Standards;
- Transient analysis;
- Hafnium oxide;
33.Design blade pitch controller of wind turbine for load frequency control (LFC) using improved differential evolution algorithm (IDEA)

机译：使用改进的差分进化算法（IDEA）设计用于负载频率控制（LFC）的风力发电机叶片桨距控制器
- 作者：Dwi Lastomo;Slamet Budiprayitno;Herlambang Setiadi;Andri Ashafani
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Power system stability;
- Frequency control;
- Wind power generation;
- Blades;
- Stability analysis;
- Wind turbines;
- Wind speed;
34.Design of fuzzy gain scheduling controller for DC motor speed adjustment on spindle CNC milling

机译：主轴CNC铣削直流调速模糊增益调度控制器设计。
- 作者：Josaphat Pramudijanto;Rijalul Fikri;Anifatul Faricha;Akhmad Rizki Hidayatullah
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Steady-state;
- DC motors;
- Loading;
- Job shop scheduling;
- Mathematical model;
- Milling;
- Process control;
35.Undesirable rolling minimization on the EDF missiles flight based on LQR methods

机译：基于LQR方法的EDF导弹飞行不期望的滚动最小化
- 作者：Gesang Nugroho;Andi Dharmawan
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Missiles;
- Mathematical model;
- Force;
- Fans;
- Unmanned aerial vehicles;
- Stability analysis;
36.Design of mini synchronous game food fest in social game food merchant saga on Android devices

机译：Android设备上社交游戏美食商人传奇中的迷你同步游戏美食盛宴的设计
- 作者：Imam Kuswardayan;Ridho Rahman Hariadi
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Games;
- Synchronization;
- Smart phones;
- Testing;
- Web services;
- Servers;
37.Dimension synthesis of suspended eight cables-driven parallel robot for search-and-rescue operation

机译：用于搜索和救援操作的悬挂式八个电缆驱动并联机器人的尺寸综合
- 作者：Latifah Nurahmi;Bambang Pramujati;Stephane Caro;Jeffrey
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Task analysis;
- Earthquakes;
- Parallel robots;
- Kinematics;
- Actuators;
- Optimization;
38.Conceptual machine vision design for day and night based on experiment approach

机译：基于实验方法的昼夜概念机器视觉设计
- 作者：Siti Mushonnifah;Hendro Nurhadi;Bambang Pramujati
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Cameras;
- Hardware;
- Image processing;
- Software;
- Night vision;
- Kalman filters;
- Digital images;
39.Source route implementation using intersection node on GPSR protocol to increase VANET's data transmission reliability

机译：使用GPSR协议上的交叉节点实现源路由，以提高VANET的数据传输可靠性
- 作者：Radityo Anggoro;Muchammad Husni;Randy Bastian
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Routing protocols;
- Routing;
- Vehicular ad hoc networks;
- Delays;
- Data communication;
- Reliability;
40.Design of an energy regenerative system for a robotic leg prosthesis

机译：机器人腿假肢能量再生系统的设计
- 作者：Amey Sunil Kulkarni;S. M. Kulkarni
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Legged locomotion;
- Springs;
- Knee;
- Induction motors;
- Permanent magnet motors;
- Magnetic levitation;
- Prosthetics;
41.Optimization of carbon dioxide (CO2) captured and distribution for enhanced oil recovery

机译：优化捕获和分配二氧化碳（CO 2 ）的方法以提高采油率
- 作者：Totok R. Biyanto;Jaswadi;M. Khalil;H. Setiawan;P. D. Gabriella;D. Setiyawan;A.P. Utomo;E. Triastutik;A. Wibawa
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Power generation;
- Oils;
- Optimization;
- Pipelines;
- Companies;
- Production;
- Mathematical model;
42.Embedded ultrasonic structural radar with fuzzy logic

机译：具有模糊逻辑的嵌入式超声结构雷达
- 作者：A Ihsan Auditia;Dimitri Mahayana;Pranoto H. Rusmin
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Transducers;
- Delays;
- Mathematical model;
- Acoustics;
- Testing;
- Correlation;
- Reflection;
43.Evolving fuzzy inference system based online identification and control of a quadcopter unmanned aerial vehicle

机译：基于进化模糊推理系统的四轴无人机在线识别与控制
- 作者：Md Meftahul Ferdaus;Sreenatha G. Anavatti;Matthew A. Garratt;Mahardhika Pratama
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Mathematical model;
- Fuzzy systems;
- Rotors;
- Fuzzy logic;
- Adaptation models;
- Unmanned aerial vehicles;
- Clustering algorithms;
44.Implementation of gamification to improve blood donors by peer motivation application

机译：通过同伴动机应用实施游戏化以改善献血者
- 作者：Radityo PrasetiantoWibowo;Leonika Sari NjotoBoedioetomo;Cucuk Evi Lusiani
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Blood;
- Unified modeling language;
- Object oriented modeling;
- Facebook;
- Sociology;
- Statistics;
- Media;
45.The development of neural networks applications from perceptron to deep learning

机译：从感知器到深度学习的神经网络应用程序的发展
- 作者：Ahmad Jobran Al-Mahasneh;Sreenatha G. Anavatti;Matthew A. Garratt
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Biological neural networks;
- Artificial neural networks;
- Neurons;
- Robots;
- Mathematical model;
- Control systems;
46.Improving project efficiency using lean construction

机译：通过精益建设提高项目效率
- 作者：Putu Dana Karningsih;Dewanti Anggrahini;Mohammad Busyral Karim;Rizki Adhitama
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Companies;
- Tools;
- Procurement;
- Databases;
- Delays;
- Buildings;
- Production;
47.CFD simulation of the end plates effect on the Elang Caraka Unmanned Aerial Vehicle (UAV)

机译：端板对Elang Caraka无人机（UAV）影响的CFD模拟
- 作者：Gesang Nugroho;B Muhammad Agung;Budi Setiawan;Caesar Wiratama
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Drag;
- Aerodynamics;
- Unmanned aerial vehicles;
- Aircraft;
- Finite element analysis;
- Atmospheric modeling;
- Stability analysis;
48.An efficient transformation from max-plus-linear systems to piecewise affine systems

机译：从最大加线性系统到分段仿射系统的有效转换
- 作者：Dieky Adzkiya;Alessandro Abate
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
49.Relative humidity monitoring system in tray trap of CaCl2water scrubber column system in biogas purification

机译：沼气净化中CaCl 2 水洗涤塔系统的塔盘捕集阱中的相对湿度监测系统
- 作者：Arief Abdurrakhman;Endlys Devira Yonando;Eka Wahyu Prasojo;Layly Dian Enggarwati;Radian Indra Mukromin;Dhirga Kurniawan
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Humidity;
- Instruments;
- Humidity measurement;
- Uncertainty;
- Temperature measurement;
- Silicon compounds;
- Pollution measurement;
50.Enhanced symbiotic organisms search (ESOS) for global numerical optimization

机译：增强共生生物搜索（ESOS）以进行全局数值优化
- 作者：Doddy Prayogo;Foek Tjong Wong;Steven Sugianto
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Organisms;
- Benchmark testing;
- Symbiosis;
- Optimization methods;
- Structural engineering;
- Genetic algorithms;
51.Calculating optical transition energies in semiconducting zigzag SWCNTs

机译：计算半导体之字形SWCNT中的光学跃迁能
- 作者：G. R. Ahmed Jamal;Sharif Mohammad Mominuzzaman
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Electron tubes;
- Indexes;
- Nonlinear optics;
- Adaptive optics;
- Integrated optics;
- Carbon nanotubes;
52.Optimization of new telecommunication tower selection at Bangkalan Regency using simulated annealing method

机译：使用模拟退火方法优化Bangkalan Regency的新电信塔选择
- 作者：Achmad Mauludiyanto;Angga Dwian Prakoso;Anifatul Faricha
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Poles and towers;
- Communications technology;
- Simulated annealing;
- Sociology;
- Statistics;
- Computer architecture;
- Microprocessors;
53.PID controller design for SSV BRP TARLAC (LD-601) ship heading using Ziegler Nichols tuning method

机译：使用Ziegler Nichols整定方法的SSV BRP TARLAC（LD-601）船首方向的PID控制器设计
- 作者：Didik Khusnul Arif;Moch. Ardi Firmansyah;Dieky Adzkiya;Iratdya Winggari;Ivan Octaviano;Rachmat Wahyudi Ismail;Muhammad Afif Nasrul Anam;Faizin Anshori
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Marine vehicles;
- Mathematical model;
- Tuning;
- Transfer functions;
- PD control;
- Process control;
- Surges;
54.Analysis of transient response first order and second order theory in pneumatic control system using feedback instrument type PCM140

机译：使用PCM140型反馈仪分析气动控制系统的瞬态响应一阶和二阶理论。
- 作者：Sardono Sarwito;Semin;Taufiq Hidayaturrahman
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Damping;
- Mathematical model;
- Testing;
- Control systems;
- Transient response;
- Steady-state;
- Fluids;
55.Human gesture imitation on NAO humanoid robot using kinect based on inverse kinematics method

机译：基于逆运动学方法的kinect对NAO人形机器人的手势模仿
- 作者：Hilmi Fadli;Carmadi Machbub;Egi Hidayat
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Kinematics;
- Mathematical model;
- Legged locomotion;
- Humanoid robots;
- Robot sensing systems;
- Robot kinematics;
56.A closed-form solution of inverse kinematic for 4 DOF tetrix manipulator robot

机译：四自由度tetrix机械臂机器人的反向运动封闭式解决方案
- 作者：Adi Novitarini;Yunafiatul Aniroh;Diana Yufika Anshori;Slamet Budiprayitno
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Kinematics;
- Robot kinematics;
- End effectors;
- Service robots;
- Mathematical model;
57.Design, development, and characterization of mobile microrobots with vision control system

机译：具有视觉控制系统的移动微型机器人的设计，开发和表征
- 作者：Ganjar Kiswanto;Reza Afrianto;Rifkie Nurcahya;Mohamad Safhire
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Robot kinematics;
- Control systems;
- Mobile robots;
- Machine vision;
- DC motors;
- Pulse width modulation;
58.Classification of EMG signal on arm muscle motion using special fourier transformation to control electric wheelchair

机译：使用特殊傅里叶变换来控制电动轮椅的肌电信号在手臂肌肉运动中的分类
- 作者：Farida Herning Tyastuti;Yunafiatul Aniroh;Darul Muslimin;A. K. Rusdhianto Effendy
- 会议名称：《2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation》 | 2017年
- Muscles;
- Wheelchairs;
- Electromyography;
- Electrodes;
- Fourier transforms;
- Gain;
- Software packages;