首页>外文会议>其他>International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)

International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Study on SCS-6/Ti-6Al-4V Composite

机译：SCS-6 / Ti-6Al-4V复合材料的研究
- 作者：ZENG Li-ying;ZHAO Yong-qing;ZHOU Lian;Vassel Alain
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- interface;
- fiber reinforced;
- composite;
2.Simulations of Viscous Flow Fields of ASTM Assembly and the Effective Average Velocities of Flow Tubes

机译：ASTM组件粘性流场和流管有效平均速度的模拟
- 作者：LIU Yang;ZHANG Wei-min;CHEN Nai-lu;WANG Ming-hua;LI Lin-lin;Yuan Jian
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- FEM;
- computer simulation;
- cooling curve;
3.Shortening the Duration of Heat Treatment in the Lower Bainitic Range

机译：在较低的贝氏体范围内缩短热处理时间
- 作者：J. Dong;H. Vetters;H.-W. Zoch
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- bainite;
- bearing steel;
- dilatometry;
4.Relation between Shot Peening Process and Fatigue Life in the Case of Hardening Steels

机译：硬化钢中喷丸处理与疲劳寿命的关系
- 作者：SHIGEYOSHIHAGA;HARUSHIGE TSUBAKINO;YASUNORI HARADA
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- shot peening;
- fatigue life;
- gear;
5.Recrystallization Behavior of Re-aged Cu-Ni-Si Alloy

机译：时效Cu-Ni-Si合金的再结晶行为
- 作者：LEI Jing-guo;LIU Ping;ZHAO Dong-mei;JING Xiao-tian
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- Cu-Ni-Si alloy;
- pre-aging;
- aging precipitation;
- recrystallization;
6.Industrial Experience with Case Hardening of Stainless Steels by Solution Nitriding

机译：通过固溶氮化处理不锈钢表面硬化的工业经验
- 作者：Hans Berns;Bernd Edenhofer;Roland Zaugg
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- case hardening;
- stainless steel;
- solution nitriding;
- applications;
7.Research on Eddy Current Testing System of the Carburized Layer Depth of 20CrMnTi Steel

机译：20CrMnTi钢渗碳层深度涡流检测系统的研究
- 作者：CHENG Xiao-min;LI Na;WU Xin- wen;FANG Hua-bin
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- carburizing;
- case depth;
- eddy current testing;
- finite element;
8.Plasma Nitriding of Low Alloy Sintered Steels

机译：低合金烧结钢的等离子渗氮
- 作者：Shiva Mansoorzadeh;Fakhreddin Ashrafizadeh;Xiao-Ying Li;Tom Bell
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- sintered steel;
- manganese;
- plasma nitriding;
9.Phase Separation Process at Early Aging Stage of Ni42CrTiAl

机译：Ni42CrTiAl早期时效阶段的相分离过程
- 作者：Wei ying-hui;Hou li-feng;Jiao shao-yang;Hu lan-qing;Xu bing-she
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- alloy;
- spinodal decomposition;
- ordering;
- phase transformation;
10.Parameter Optimization Study on Control of Distortion in Bright Bar Used In Rack Application Subjected To Induction Heat Treatment

机译：感应热处理机架应用中光亮棒变形控制参数优化研究
- 作者：K. Palaniradja;N. Alagumurthi;V. Soundararajan
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- induction hardening;
- distortion;
- EN18D steel;
- factorial method and regression model;
11.Preparation of Fe-Al Binary System Intermetallic Compounds by Multi-Layered Roll-Bonding

机译：多层滚压法制备Fe-Al二元体系金属间化合物
- 作者：Akio Nishimoto;Katsuya Akamatsu;Kazuyoshi Nakao;Kazuo Ichii;Tomohiro Hiraki
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- iron aluminide;
- intermetallic compound;
- accumulative roll bonding;
- interfacial reaction;
- reactive diffusion;
12.Effect of Lanthanum and Yttrium on Microstructures of Cu-Cr alloys

机译：镧和钇对Cu-Cr合金组织的影响
- 作者：Chen Xiaofang;Zhang Meng;Yin Jianying;Shuai Gewang;Liu Guoming
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- Cu-Cr alloys;
- yttrium element;
- lanthanum element;
- microstructures;
13.Quasi-fluid State in Solid and Cu-Zn-Al Alloy Nanotube

机译：固态和Cu-Zn-Al合金纳米管中的准流态
- 作者：GAO Hou-xiu;CHEN Quan-shui;LIU Shuang-yi;ZHANG Gui-jie;YANG Yu-qin
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- nanotube;
- quasi-fluid state;
- alloy;
- and transmission electron microscope (TEM);
14.New Sensor Concepts for Enhancing Heat Treatment Processes and Analysis

机译：增强热处理工艺和分析的新传感器概念
- 作者：Jay I. Frankel
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- sensors;
- heat flux;
- heat transfer coefficient;
- ill-posed heat conduction;
15.Non-Equilibrium Grain-Boundary Segregation of Phosphorus And the Effective Time in Step Cooling Process

机译：磷的非平衡晶界偏析和降温过程中的有效时间
- 作者：LI Qing-fen;LI Li;LIU Er-bao;CUI Xiu-fang;LIU Dong;CHEN Hong-bin
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- grain boundaries segregation;
- step cooling process;
- effective time;
- auger electron spectroscopy;
16.Numerical Methods for Safeguarding the Performance of the Quenching Process

机译：保障淬火过程性能的数值方法
- 作者：I. FELDE;T. RETI;S. Segerberg;J. Bodin;G. S. Sarmiento;G E. Totten;J. GU
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- testing;
- monitoring;
- quenching;
- quenchants;
- cooling curves;
- hardening power;
- control limits;
- optimization;
- decision support;
17.On The Enhancement of Wear Resistance of Hardened Carbon Tool Steel (AISI 1095) With Cryogenic Quenching

机译：低温淬火提高淬硬碳工具钢（AISI 1095）的耐磨性
- 作者：V.Soundararajan;N.Alagurmurthi;K.Palaniradja
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- AISI 1095 steel;
- liquid nitrogen;
- quenching;
- cryogenic quenching;
- hardening;
18.Magnetic Flux Controllers for Induction Heating Applications

机译：感应加热应用的磁通控制器
- 作者：Valentin Nemkov;Robert Goldstein;Robert Ruffini
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- heat treatment;
- inductor;
- magnetic flux;
- control;
- concentrator;
- magnetodielectrics;
- computer simulation;
19.Microstructures and Hardness of 8CrWMoV Steel with Multiple Types of Ultra Fine Carbides

机译：多种超细硬质合金8CrWMoV钢的组织和硬度
- 作者：DAI Yu-mei;ZHANG Zhan-ping;MA Yong-qing;QI Yu-hong;LIU Yan-xia;YU Tao
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- 8CrWMoV steel;
- ultra-fine carbide;
- heat treatment;
- microstructure;
- hardness;
20.Effects of Austempering after Hot Deformation on the Mechanical Properties of Hot Rolled Si-Mn TRIP Steel Sheets

机译：热变形后的奥氏体化对热轧Si-Mn TRIP钢板力学性能的影响
- 作者：LI Zhuang;ZHANG Ping-li;WU Di
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- hot rolled;
- finishing rolling;
- hot deformation;
- retained austenite;
- TRIP;
- mechanical properties;
21.Effects of Heat-treatment on Microstructure and Magnetic Properties of Ba Ferrite Ultrafine Powders Prepared by Sol-gel

机译：热处理对溶胶-凝胶法制备钡铁氧体超细粉组织和磁性能的影响
- 作者：KONG Xiao-dong;Zhu Mei-wu;ZHENG Jia-sheng
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- barium ferrite;
- ultrafine powder;
- microstructure;
- AFM;
- magnetic property;
22.Effect of Partial Recrystallization on Microstructure and Mechanical Properties for Cross-rolled Molybdenum Sheet

机译：部分再结晶对交叉轧制钼薄板组织和力学性能的影响
- 作者：Chengfan Gu;Junliang Zhang
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- microstructure;
- molybdenum sheet;
- static heat treatment;
- mechanical properties;
23.Effects of Heat Treatment and Thermal Cycling on Martensitic Transformation Behavior of Ni_(59)Al_(11)Mn_(30) High Temperature Shape Memory Alloy

机译：热处理和热循环对Ni_（59）Al_（11）Mn_（30）高温形状记忆合金马氏体相变行为的影响
- 作者：He Zhi-rong;Zhou Jing-en
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- NiAlMn;
- shape memory alloy;
- martensitic transformation;
- heat treatment;
- thermal cycling;
24.New Developments in Thermo-Chemical Diffusion Processes

机译：热化学扩散工艺的新进展
- 作者：Bernd Edenhofer
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
25.Effect of Texture on Deep-Drawing Property of Air-Condition Aluminium 1050H19 Foils

机译：质地对空调铝1050H19箔深冲性能的影响
- 作者：JI Ze-sheng;WANG Tao;WANG Guo-jun;ZHANG Tao;CHI Da-zhao
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- aluminium 1050 foils;
- texture;
- deep-drawing property;
26.Effect of Stable Magnetic Field on the Phase Transformation of Sr3 Steel

机译：稳定磁场对Sr3钢相变的影响
- 作者：WANG Ya-nan;LIAO Dai-qiang;WU Zhan-jun
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- stable magnetic field;
- Sr3 steel;
- phase transformation;
27.Effect of Cold-Rolling on Precipitation Phenomena in Sensitized Type 316L and 304L Austenitic Stainless Steels

机译：冷轧对敏化316L和304L型奥氏体不锈钢的析出现象的影响
- 作者：H.Tsubakino;A.Yamamoto;T.Yamada;LXiu;M.Terasawa;S.Nakahigashi;H.Harada
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- 316L;
- 304L;
- cold-roll;
- sensitization;
- precipitation;
- TEM;
28.Effect of Annealing on the Magnetism of the Sintered NdFeB Magnet

机译：退火对烧结钕铁硼磁体磁性的影响
- 作者：ZHENG Hua-jun;HUANG Jian-guo;MA Chun-an
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- permanent magnet;
- sintered NdFeB magnets;
- annealing;
29.Design of Industrial Quenching Processes

机译：工业淬火工艺设计
- 作者：Nikolai. L KOBASKO;George. E. TOTTEN
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
30.Development of High Strength Steel Designed for Carbonitriding with High Nitrogen Content to Be Used for Automatic Transmission Gears

机译：自动变速箱齿轮用高氮碳氮共渗用高强度钢的开发
- 作者：Youichi Watanabe
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- carbonitriding;
- nitrogen;
- shot peening;
- contact fatigue strength;
- pitting;
- gear;
31.Challenges to Introduce Advanced Cooling Technology by the Utilization of Plural Cooling Velocity

机译：利用多重冷却速度引入先进冷却技术的挑战
- 作者：Kiyoshi Funatani
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- distortion;
- hardness;
- cooling curve;
- heat transfer coefficient;
- vapor blanket stage;
- computer simulation;
32.Computer Aided Design of Heat Treatment for AISI P20+Ni Mold Steel with Good Machinability

机译：具有良好切削性的AISI P20 + Ni模具钢的热处理计算机辅助设计
- 作者：HU Xin-bin;GAO Wen;HE Yan-lin;LI Lin
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- AISI P20+Ni mold steel;
- thermo-calc software;
- heat treatment;
- machinability;
33.Characterization of Microstructure of Permanent Mold Cast Zinc Alloy ZA27

机译：永久铸模锌合金ZA27的显微组织表征
- 作者：CHEN Ti-jun;LI Yuan-dong;HAO Yuan
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- permanent mold cast;
- ZA27 alloy;
- microstructure;
34.Aging Precipitation Characteristics of Lead Frame Cu-Cr-Zr-Mg Alloy0

机译：引线框架Cu-Cr-Zr-Mg合金的时效析出特性0
- 作者：DONG Qi-ming;SU Juan-hua;LIU Ping;LI He-jun;KANG Bu-xi
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- Cu-Cr-Zr-Mg alloy;
- aging;
- precipitation phase;
- hardness;
- electrical conductivity;
35.Combining Aluminum Heat Treat with Hot Isostatic Pressing: A Comparison of Structure, Properties, and Processing Routes for a Cast Al-Si-Mg Alloy

机译：铝热处理与热等静压相结合：铸造Al-Si-Mg合金的组织，性能和加工路线的比较
- 作者：Stephen J. Mashl
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- aluminum;
- heat treat;
- hot isostatic pressing;
- HIP;
- mechanical properties;
- fatigue life;
36.An Advanced Oscillation Mixing Method for Improving the Cooling Uniformity in Quenching

机译：提高淬火冷却均匀性的先进振荡混合方法
- 作者：Hiroyuki Hoshino;Hiromitsu Murakami;Hideo Yokota;Satoshi Suda;Hideki Tsuge;Koichi Terasaka;Toshiaki Wakabayashi
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- quenchant;
- cooling power;
- distortion;
37.Preliminary Study to Identify Criterion for Quench Crack Prevention by Computer Simulation

机译：通过计算机仿真确定防止淬火裂纹的准则的初步研究
- 作者：Kyozo Arimoto;Fumiaki Ikuta;Takashi Horino;Shigeyuki Tamura;Michiharu Narazaki;Yoshio Mikita
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- quench cracking;
- heat treatment simulation;
38.Microstructure of Nitrided Aluminum Alloys Using an Electron-Beam-Excited-Plasma (EBEP)

机译：电子束激发等离子体（EBEP）氮化铝合金的显微组织
- 作者：L. Liu;A. Yamamoto;T. Hishida;H. Shoyama;T. Kara;H. Tsubakino
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- microstructure;
- electron-beam-excited-plasma;
- nitriding;
- aluminum alloys;
39.Micro-properties of a Type 316 Steel Annealed in Air and Vacuum

机译：空气和真空退火的316型钢的微观性能
- 作者：LIU Gui-min;MA Li-li;KURZYDLOWSKI Krzysztof Jan
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- type 316 steel;
- annealing;
- air;
- vacuum;
- micro-property;
40.Microstructure and Mechanical Property of Ni Metal Treated by Surface Mechanical Attrition

机译：表面机械磨损处理的镍金属的组织和力学性能
- 作者：Wen Chun-sheng;Rong Yong-hua;T.Y. Hsu (Xu Zu-yao)
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- nanostructured surface layer;
- microstructure;
- mechanical property;
- surface mechanical attrition;
41.Microstructure and Mechanical Properties of the 25Si2MnCrMo Martensite Microalloyed Steel

机译：25Si2MnCrMo马氏体微合金钢的组织和力学性能
- 作者：PENG Hui-fen;MA Xiao-li;SONG Xiao-yan;WANG Wen-shui;LIU Jian;GU Nan-ju
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- 25Si2MnCrMo;
- microalloyed steel;
- martensite;
42.Microstructure and Mechanical Properties of Molybdenum Sheet after Cross Rolling Processing

机译：交叉轧制后钼板的显微组织和力学性能
- 作者：Chengfan Gu;Junliang Zhang
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- molybdenum sheet;
- straight rolling;
- cross rolling;
- microstructure;
- macrotexture;
- mechanical properties;
43.Mechanism of α-Cr Formation in Nickel-Base Superalloy INCONE1718 after Long Time Thermal Exposure

机译：长时间热暴露后镍基高温合金INCONE1718中α-Cr形成的机理
- 作者：WANG Gai-lian;XIE Xi-shan
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- INCONEL718;
- α-Cr phase;
- thermal-calc;
44.Analysis of High-temperature Boiler Tube Failure for T91 T22

机译：T91和T22高温锅炉管故障分析
- 作者：SHU Guo-gang;DING Hui;ZHAO Yan-fen;XUE Fei;ZHAO Ling-song;ZHANG Lu;LIU Jiang-nan;WANG Zheng-pin
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- superheater;
- tube failure;
- material examination;
- short-term overheated;
45.A Detailed Observation on Successive Stress-Induced Martensite Transformation in CuAlMnZnZr Alloy Polycrystalline Above A_f

机译：在A_f以上的CuAlMnZnZr合金多晶中相继产生应力马氏体相变的详细观察
- 作者：Li Zhou;Wang Ming-pu;Tang Wang;Guo Ming-xing
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- CuAlMnZnZr shape memory alloy;
- stress-induced martensite;
- transformation hysteresis;
46.A Novel kind of Air Cooling Bainite Nitriding Steel and Plasma Nitriding Test

机译：一种新型的空冷贝氏体渗氮钢及等离子渗氮试验
- 作者：LI Xin-sheng;LIANG Shu-rong
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- air-cooling;
- bainite;
- nitriding steel;
- plasma nitriding;
47.Abnormal Austenite-Ferrite Transformation Behaviors of Fe-1Si: Dilatometric Measurements

机译：Fe-1Si的异常奥氏体-铁素体相变行为：膨胀测量
- 作者：LIU Yong-chang;ZHANG Zhe-ping;ZHAO Kai;LI Bao-yin
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- solid state phase transformation;
- iron-based alloys;
- microstructure;
- dilatometry;
48.A Hybrid Low Temperature Surface Alloying Process for Austenitic Stainless Steels

机译：奥氏体不锈钢的混合低温表面合金化工艺
- 作者：Y. Sun
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- stainless steel;
- surface alloying;
- plasma nitriding;
- plasma carburising;
- wear;
- corrosion;
49.Acetylene Vacuum Carburizing

机译：乙炔真空渗碳
- 作者：Hitoshi Iwata
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- acetylene;
- below 1 kPa;
- vacuum carburizing;
- mass production;
50.350℃ - Thermal Stability of Austempered Ductile Iron

机译：350℃-奥氏体球墨铸铁的热稳定性
- 作者：M. Pellizzari;M. Zadra;A. Molinari
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- ADI;
- austempering;
- thermal stability;
- austenite;
51.Influence of Tempering Temperature on Cyclic Viscoplastic Behaviour of 55NiCrMoV7 Steel

机译：回火温度对55NiCrMoV7钢循环粘塑性行为的影响
- 作者：ZHANG Zhan-ping;DELAGNES Denis;BERNHART Gerard
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- tempering;
- 55NiCrMoV7 steel;
- cyclic softening;
- viscoplastic behaviour;
52.Erosion Resistance Behaviours of H13 Steel to Molten ADC12 Alloy

机译：H13钢对熔融ADC12合金的耐蚀性能
- 作者：MIN Yong-an;XU Luo-ping;WU Xiao-chun;LI Lin;WANG Rong
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- erosion resistance;
- oxide film;
- hot work steel;
- aluminium alloy;
53.Effect of Heat Treatment on Microstructures and Properties of Near-Isothermally Forged TiAl Alloy Containing Minor Ni

机译：热处理对含微量镍的近等温锻造TiAl合金组织和性能的影响
- 作者：YUAN Zhi-shan;CHEN Sui-yuan;ZHOU Li;LIU Chang-sheng;ZHANG Ji;ZHANG Jian-wei
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- TiAl;
- forging;
- heat treatment;
- tensile properties;
54.Precipitation of Icosahedral Quasicrystalline Phase, R-phase and Laves Phase in Ferritic Alloys

机译：铁素体合金中二十面体准晶相，R相和Laves相的析出
- 作者：Keisuke Yamamoto;Yoshisato Kimura;Yoshinao Mishima
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- transmission electron microscopy;
- quasicrystal;
- R-phase;
- laves phase;
- precipitation;
- ferritic steel;
55.Solid Solution Nitriding Technology of 15Cr-7.5Mn-2.6Mo Duplex Stainless Steel

机译：15Cr-7.5Mn-2.6Mo双相不锈钢固溶渗氮工艺
- 作者：FU Rui-dong;ZHAO Pin;WANG Chun-Yu;QIU Liang;ZHENG Yang-zeng
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- duplex stainless steel;
- solid solution nitriding;
- orthogonal test;
- diffusion activation energy;
56.Surface Cleaning or Activation? Control of Surface Condition Prior to Thermo-Chemical Heat Treatment

机译：表面清洁或活化？在化学热处理之前控制表面状况
- 作者：Brigitte Haase;Juan Dong;Jens Heinlein
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- thermochemical heat treatment;
- surface condition;
- surface cleaning;
- surface activation;
57.Research on Mediate Temperature Decomposition of High Nitrogen Austenite

机译：高氮奥氏体中温分解研究
- 作者：LI Xiao-ling;BEI Duo-hui;HU Ming-juan;ZHU Zu-chang
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- high nitrogen austenite;
- mediate temperature decomposition;
- γ′-Fe_4N;
- TEM;
- micro-hardness;
58.Improvement of Strength in 2024 Al Alloy by Enhanced Solution Treatment

机译：通过强化固溶处理提高2024铝合金的强度
- 作者：Xu Xiaojing;Zhang Jie;Chen Kangming;Wang Hongyu;Kim Seocksam
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- aluminum alloy;
- mechanical property;
- solution treatment;
- aging treatment;
59.Investigation of Creep Feed Grinding Parameters and Heat treatment Effects on the Nickel-base Superalloys

机译：镍基高温合金蠕变进料磨削参数及热处理效果的研究
- 作者：Hasan Jamshidi;Sayed Ali Sadough Vanini;Alireza Attari
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- creep feed grinding;
- dressing;
- depth of cut;
- work speed;
- recrystallization;
- burning;
60.High Carbon Alloy Steels with Multiple Types of Ultra-fine Carbides and Their Characteristics

机译：多种超细硬质合金的高碳合金钢及其性能
- 作者：MA Yong-qing;GAO Hong-tao;QI Yu-hong;ZHANG Zhan-ping;DAI Yu-mei;LIU Yan-xia
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- ultra-fine carbides;
- high carbon steels;
- alloy composition design;
- transformation;
- structure and properties;
61.Heat Treatment and Properties of Nitrogen Alloyed, Martensitic, Corrosion-resistant Steels

机译：氮合金，马氏体，耐腐蚀钢的热处理和性能
- 作者：Reinhold Schneider;Klaus Sammt;Roland Rabitsch;Michael Haspel
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- high nitrogen steels;
- heat treatment;
- corrosion;
- toughness;
62.Heat Treatment of Modified 6005A Alloy for Vehicles

机译：车用改性6005A合金的热处理
- 作者：CAO Ling-fei;WANG Ming-pu;GUO Ming-xing;LI Zhou
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- 6005A;
- heat treatment;
- quench sensitivity;
63.Friction Wear Property of Brake Materials by Copper-based Powder Metallurgy With Various Brake Speeds

机译：不同制动速度的铜基粉末冶金制动材料的摩擦磨损性能
- 作者：LIU Jian-xiu;GAO Hong-xia;WEI Xiu-lan
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- brake material;
- friction wear;
- brake speed;
- powder metallurgy;
64.Vacuum Furnace - Integrated 'Sub zero' Treatment

机译：真空炉-集成的“零以下”处理
- 作者：B. Zieger;Hubert Schulte
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- vacuum heat treatment including 'deep freezing' facility;
65.Gas Quenching during Age Hardening of the Aluminium Casting Alloy Al-7Si-0.3Mg

机译：铸铝Al-7Si-0.3Mg时效硬化过程中的气体淬火
- 作者：A. Rose;O. Kessler;F. Hoffmann;H.W. Zoch
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- aluminium;
- precipitation hardening;
- gas quenching;
- mechanical properties;
66.Thermal Properties of Al-50Si Alloys

机译：Al-50％Si合金的热性能
- 作者：Akio Nishimoto;Katsuya Akamatsu;Kazuyoshi Nakao;Kazuo Ichii
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- Al-Si alloy;
- coefficient of thermal expansion;
- sintering, casting;
- strontium addition;
- modification;
67.The Use of 'In Process' Monitoring Equipment in Heat Treatment Today

机译：当今在热处理中使用“过程中”监控设备
- 作者：Dave Plester
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- temperature monitoring;
- profiling;
- RF transmission;
- real time;
- software;
68.Tribological Performance of Coated Surfaces

机译：涂层表面的摩擦学性能
- 作者：Kenneth Holmberg;Anssi Laukkanen
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- hard coatings;
- FEM modelling;
- stress simulation;
- coating fracture;
69.Verification of Inverse Quench-Hardening Phenomena in Bearing Steel Specimens by Experiment and Computer Simulation

机译：通过实验和计算机仿真验证轴承钢试样的逆淬火强化现象
- 作者：Kyozo Arimoto;Chuanrong Jin;Shigeyuki Tamura;Kiyoshi Funatani;Mamoru Tajima
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- inverse quench-hardening;
- heat treatment simulation;
70.The Research and Application of Non-quenched and Tempered Steel 12Mn2VBS

机译：非调质钢12Mn2VBS的研究与应用
- 作者：ZHOU Xian-liang;DONG Ying-hu;HUA Xiao-zheng;ZHANG Jian-yun;YE Zhi-guo
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- then on-quenched and tempered steel;
- microstructure and performance;
- cooling speed;
71.The Influence of Carburizing Parameters on Carbon Transfer Coefficient

机译：渗碳参数对碳转移系数的影响
- 作者：Tadeusz Sobusiak
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- metallurgy;
- heat treatment;
- carburizing;
- carbon transfer coefficients;
72.The Microstructure and Mechanical Behavior Evaluation of Ce-TZP/Al_2O_3 Nanocomposites

机译：Ce-TZP / Al_2O_3纳米复合材料的微观结构和力学性能评估
- 作者：YANG Gang;LI Jun-chu;WANG Gao-chao;M. Yashima;MING Si-lin;YU Ji-liang
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- nanocomposite;
- mechanical behavior;
- strengthening and toughening;
- hot-pressing;
73.The Effect of Shot Peening on the Fatigue Strength of Pure Titanium

机译：喷丸处理对纯钛疲劳强度的影响
- 作者：ZHANG Jian-bin;FAN Ding;YU Shu-rong
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- titanium;
- microstructure;
- fatigue;
74.Study on Aging Kinetics of CuNiSi Alloy

机译：CuNiSi合金的时效动力学研究
- 作者：LIU Ping;LEI Jing-guo;ZHAO Dong-mei;JING Xiao-tian
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- CuNiSi alloy;
- aging;
- resistivity;
- volume fraction;
- transformation kinetics;
75.Stress Dependence of Transformation Plastic Behavior Tatsuo Inoue

机译：塑性变形行为的应力依赖井上辰男
- 作者：Fukuyama University;Fukuyama/Hiroshima;Japan
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- transformation plasticity;
- four-point bending tests;
- metallo-thermo-mechanical simulation;
- stress dependence;
76.Precipitate-Accommodated Plasma Nitriding for Aluminum Alloys

机译：铝合金的沉淀沉淀等离子渗氮
- 作者：Patama Visittipitukul;Tatsuhiko Aizawa;Hideyuki Kuwahara
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- plasma nitriding;
- aluminum alloys;
- aluminum nitride;
- precipitaet accommodation;
- Al_2Cu;
77.Identification of Heat Transfer Coefficients by Use Conditions of Quenching Oil

机译：根据淬火油的使用条件确定传热系数
- 作者：Katsumi Ichitani
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- heat transfer coefficient;
- quenching oil;
- heat-treatment simulation;
78.Attaining the Steady State of the Nitriding Potential after a Change of NH_3 Atmosphere Flow Rate during the Gas Nitriding Process

机译：气体氮化过程中NH_3大气流量变化后达到氮化势的稳态
- 作者：Jerzy Michalski;Jan Tacikowski;Piotr Wach;Tomasz Babul;Nabil Tarfa
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- nitriding processes;
- nitriding potential;
- NH_3 atmosphere characteristics;
- stabilized state;
79.A Cooperative Activity on Quenching Process Simulation - Japanese IMS-VHT Project on the Benchmark Analysis and Experiment -

机译：淬火过程模拟中的合作活动-日本IMS-VHT项目基准分析和实验-
- 作者：Tatsuo Inoue;Youichi Watanabe;Kazuo Okamura;Michiharu Narazaki;Hayato Shichino;Dong-Ying Ju;Hideo Kanamori;Katsumi Ichitani
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- modeling;
- simulation;
- IMS;
- VHT;
- benchmark project;
- material database;
- heat transfer database;
- cylinder;
- disc;
- ring;
- helical gear;
- experimental verification;
80.Integration of Gas Nitrocarburising and Oxidising in a Mass Production Line for Brake Pistons

机译：制动活塞批量生产线中的气体氮碳共渗和氧化的集成
- 作者：Gero Walkowiak;Dieter Mueller;Uwe Zeibig
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- corr-I-dur~reg;
- nitrocarburising;
- oxidising;
- corrosion resistance;
- brake piston;
- mass production;
81.Elimination of Quench Cracking by Controlling Agitation Uniformity

机译：通过控制搅拌均匀性消除淬火裂纹
- 作者：CANALE;Lauralice C.F;TOTTEN;George E.
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- heat treatment;
- agitation uniformity;
- ultrasonic agitation;
- agitation by magnetic field;
82.Evaluation of Process Capability in Gas Carburizing Process to Achieve Quality through Limit Design Concept

机译：通过极限设计概念评估气体渗碳过程达到质量的过程能力
- 作者：K. Palaniradja;N. Alagumurthi;V. Soundararajan
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- gas carburizing;
- optimization;
- carbon potential;
- holding time;
- quenching time;
- furnace temperature;
83.Evaluation of Crack-tip Stress in Titanium Oxide Film Using Piezo-spectroscopy Methods

机译：压电光谱法评估氧化钛膜的裂纹尖端应力
- 作者：WAN Keshu;ZHU Wenliang;PEZZOTTI Giuseppe;MIAO Lei;TANEMURA Sakae
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- titanium oxide;
- piezo-spectroscopy;
- fracture toughness;
- and piezo-spectroscopic coefficient;
84.Evaluation of Important Factors Affecting Quench Distortion of Carburized Hypoid Gear with Shaft by Using Computer Simulation Methods

机译：用计算机仿真方法评估影响轴渗碳双曲面齿轮淬火变形的重要因素
- 作者：Tsuyoshi Sugimoto;Youichi Watanabe
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- quenching distortion;
- helix deviation;
- profile deviation;
- simulation;
- cooling curve;
- heat transfer coefficient;
- hypoid gear;
85.Effect of Heat-Treatment Parameters on Microstructures and Properties of Cr12W2MoVNbNB Steel

机译：热处理参数对Cr12W2MoVNbNB钢组织和性能的影响
- 作者：WANG Zheng-pin;YAO Yu-hong;LIU Jiang-nan;GU Hai-cheng;SHI Chong-zhe
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- strength;
- plasticity;
- heat stability;
- biphasic structure;
- sub-microstructure;
86.Quenchants for Induction Hardening for the Automotive Industry, Choice and Maintenance

机译：汽车行业感应淬火淬火剂，选择和维护
- 作者：Hartmut Beitz;Thorsten Beitz
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- induction hardening;
- quenchants;
- insulating film;
- maintenance;
87.Effect of Cd and Sn Addition on the Microstructure and Mechanical Properties of Al-Si-Cu-Mg Cast Alloy

机译：Cd和Sn的添加对Al-Si-Cu-Mg铸造合金组织和力学性能的影响
- 作者：LI Rong-de;LI Run-xia;YU Li;HU Zhuang-qi
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- Al-Si-Cu-Mg cast alloy;
- trace element;
- Cd addition;
- microstructure;
- age-hardening;
88.Development of Low and Middle Carbon Martensite Spring Steel with High Strength and Toughness for Automobile

机译：汽车用高强度高韧性中低碳马氏体弹簧钢的研制
- 作者：Li Ye-sheng;Wu Zi-ping;Zhu Yin-lu;Chen Hui-huang
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- low and middle carbon martensite;
- alloying;
- spring steel;
- property;
- microstructure;
89.Development of New Sliver Probe for Cooling Power Test of Polymer Quenchants

机译：新型聚合物猝灭剂冷却功率测试用银条探针的研制
- 作者：Michiharu NARAZAKI;Mamoru TAJIMA;Shigeru ASADA;Katsumi ICHITANI;Hideo YOKOTA;Mitsugu TANAKA;Youichi WATANABE
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- quenchant;
- cooling power test;
- cooling curve test;
- silver probe;
- polymer quenchant;
90.Cooling Curve's Effect on Hardening Behavior of Steel

机译：冷却曲线对钢硬化行为的影响
- 作者：Kazuto Fukuhara;Shigeru Asada;Yoshihiro Tomita;Syusaku Maeda
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- quenching oil;
- cooling performance;
- additive;
- hardening performance;
91.Crystallization Behavior and Magnetic Properties of (Fe_(0.6)Co_(0.4))_(86)Hf_7B_6Cu_1 Alloy

机译：（Fe_（0.6）Co_（0.4））_（86）Hf_7B_6Cu_1合金的结晶行为和磁性
- 作者：LIANG Xiu-bing;FERENC J.;KULIK T.;XU Bin-shi
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- nanocrystalline soft magnetic materials;
- crystallization process;
- isothermal annealing;
- coercivity;
- magnetization;
92.Changes of Tempering Microstructure and Properties of Fe-Cr-V-Ni-Mn-C Cast Alloys

机译：Fe-Cr-V-Ni-Mn-C铸造合金回火组织和性能的变化
- 作者：LIU Yan-xia;MA Yong-qing;WANG Yue-hua;ZHANG Zhan-ping;ZHANG Yang
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- Fe-Cr-V-Ni-Mn-C alloy;
- tempering process;
- transformation;
- property;
93.Case Depth Measurement of Induction Hardening Using Image Processing

机译：利用图像处理测量感应淬火的壳体深度
- 作者：Kitti Pongsathaporn;Pramuk Jenkittiyon;Siriporn Daopiset;Somnuk Watanasriyakul
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- case depth measurement;
- induction hardening;
- image processing;
94.Constitutional Design and Dielectric Properties of BST Graded Ceramics

机译：BST梯度陶瓷的结构设计和介电性能
- 作者：ZHU Jing-chuan;CHENG Hua-rong;WU Shu-yan;JEON Jae-ho
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- barium strontium titanate;
- boric oxide;
- curie point;
- axial ratio;
- graded material;
95.Aging Behavior of Cu-Cr-Zr-Ce Alloy

机译：Cu-Cr-Zr-Ce合金的时效行为
- 作者：LIU Yong;LIU Ping;SU Juan-hua;TIAN Bao-hong;LI Wei
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- Cu-Cr-Zr alloy;
- rare earth;
- aging;
- cold deformation;
- electrical conductivity;
- microhardness;
96.Application of Electron Beam Surface Technologies in the Automotive Industry

机译：电子束表面技术在汽车工业中的应用
- 作者：Rolf Zenker;Anja Buchwalder
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- electron beam;
- surface treatment 3D beam deflection;
- steels;
- cast iron;
- Al;
- Mg;
- Ti alloys;
- automotive applications;
97.State of the Art Treatment of Non-Ferrous Castings 3-in-1 Heat Treatment Systems Combine Foundry Processes

机译：有色金属铸件三合一热处理系统的先进处理技术，结合铸造工艺
- 作者：Volker R. Knobloch
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- sand molds;
- solution heat treatment;
- de-coring;
- sand reclamation;
- integrating casting processes;
- fluidized beds;
- cost reduction;
98.Standardization of New Sliver Probe for Cooling Power Test of Polymer Quenchant

机译：聚合物猝灭剂冷却功率测试用新型条形探头的标准化
- 作者：Hideo YOKOTA;Katsumi ICHITANI;Kazuyoshi YAMAMOTO;Hiroyuki IKUMI;Yasufumi SUGIURA;Michiharu NARAZAKI
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- quenchant;
- cooling power test;
- cooling curve test;
- silver probe;
- polymer quenchant;
99.Study On the Tribological Behavior of the Arc-added Glow Discharge Plasma Non-hydrogen Carburization On Titanium Alloy Surfaces

机译：含钛辉光放电等离子体无氢渗碳在钛合金表面的摩擦学行为研究
- 作者：CHEN Fei;ZHAHG Yue-fei;Liu Yu;TANG Bin;PAN Jun-de
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- Ti6Al4V;
- arc-added glow discharge technique;
- plasma non-hydrogen carburizing;
- tribological behavior;
100.Study on Thermomagnetic Treatment Fe-25.5Cr-12Co Permanent Magnetic Alloy

机译：Fe-25.5Cr-12Co永磁合金的热磁处理研究
- 作者：GAO Run-sheng;ZHEN Liang;SHAO Wen-zhu;SUN Xue-yin;ZHU Dan-yang;XU Ren-gen
- 会议名称：《International Federation for Heat Treatment and Surface Engineering Congress vol.1; 20041026-28; Shanghai(CN)》 | 2004年
- Fe-25.5Cr-12Co alloy;
- thermomagnetic treatment;
- magnetic property;
- microstructure;