首页>外文会议>其他>National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms

National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Design and Synthesis of a Four Fingered Articulated Dexterous Robot Hand

机译：设计和合成四指铰接式迷风机器人手
- 作者：Ritwik Chattaraj;Anirudha Bhattacharjee;Bikash Bepari;Subhasis Bhaumik
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Degrees of freedom;
- Robot hand;
- Flexion/extension;
- Abduction/adduction;
2.Modeling Stiffness and Damping in Rotational Degrees of Freedom Using Multibond Graphs

机译：使用多元图旋转自由度模拟刚度和阻尼
- 作者：Georges Tod;Francois Malburet;Julien Gomand;Pierre-Jean Barre
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Multibody dynamics;
- Multibond graphs;
- Spherical joint;
- Revolute joint;
- Causality;
3.Performance Analysis of Oil Dashpot in Control and Safety Rod Drive Mechanism of Prototype Fast Breeder Reactor

机译：原型快速育种反应器控制安全杆驱动机构的油划线性能分析
- 作者：L. Suresh;R. Vijayashree;V. Rajan Babu;S. Raghupathy;P. Chellapandi
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Shutdown system;
- CSRDM;
- Oil dashpot;
- PFBR;
4.Self-Calibration of a Camera Equipped SCORBOT ER-4u Robot

机译：配备的相机的自校准装备的scorbot er-4u机器人
- 作者：Gossaye Mekonnen Alemu;Sanjeev Kumar;Pushparaj M. Pathak
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Epipolar geometry;
- Robot kinematics;
- Self-calibration;
- Stereo vision;
- ViewFlex;
5.Comparative Finite Element Analysis of Reconstructed New and Worn Tooth of Spur Gear

机译：正新磨损齿轮齿轮的比较有限元分析
- 作者：Atul Kumar;P. K. Jain;P. M. Pathak
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Spur gear;
- Reverse engineering;
- 3D laser scanner;
- Reconstruct of 3D CAD model;
- FEM analysis;
6.Fabrication of Accurate Bone Implant Geometry Using Puzzle Solving Technique

机译：使用拼图求解技术的精确骨植入物几何的制造
- 作者：Rashmi Uddanwadikar;Vikram Uddanwadiker;Shital Chiddarwar
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Component;
- Formatting;
- Style;
- Styling;
- Insert;
7.Ride comfort and Vehicle handling of Quarter Car Model Using SIMULINK and Bond Graph

机译：使用Simulink和Bond图骑四分之一车型的舒适和车辆处理
- 作者：Anirban C. Mitra;Nilotpal Benerjee
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- 4 DOF Quarter Car Model;
- Ride comfort;
- Road Holding;
- Head displacement;
- Bondgraph;
- SIMULINK;
8.Slurry Erosion Performance of Detonation Gun Sprayed Stellite-6 on 13Cr4Ni Hydroturbine Steel at two Different Angles under Hydro-Accelerated Conditions

机译：在水加速条件下，在13Cr4NI水刺钢上喷涂爆炸枪的泥浆腐蚀性能
- 作者：Gurpreet Singh;Sanjeev Bhandari
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Slurry erosion;
- High speed erosion tester;
- Scan Electron Microscope;
- Detonation Gun component;
9.Dynamic Analysis of Aero-engine Rotors Supported on Ball bearing system

机译：滚珠轴承系统支撑的航空发动机转子动态分析
- 作者：M. Rajasekhar;J. Srinivas;Aniket Divekar
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Single disk rotor;
- Nonlinear forces;
- Time integration scheme;
- Effects of speed of rotation;
10.Modeling and simulation of magnetorheological damper through bond graph

机译：磁体阻尼器通过粘合图的建模与仿真
- 作者：Naveen Thakur;Amalendu Mukherjee
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Magnetorheological damper;
- MR fluids;
- Semiactive device;
- Bond graph;
11.Integrated Approach Of Ergonomics And Fem Into Truck Drivers Seat Comfort

机译：符合人体工程学和FEM的综合方法，进入卡车司机座椅舒适
- 作者：Kedar Chimote;Mahendra Gupta
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Seat design;
- Truck;
- Ergonomic Study of Driver Seat;
- Comfort;
- Anthropometry;
- CAD;
- CAE;
- FEM etc;
12.Development of Strength Testing Machine for Artificial Ligaments

机译：人工韧带强度试验机的研制
- 作者：Yognandini Ramteke;Ashish Deoghare
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Bio mechanical model;
- Artificial Ligaments;
- Implant model;
- Strength testing;
13.Estimation of States of Seeker System of a Missile using Sliding Mode Observer and Kalman filter approaches - A Comparative Study

机译：用滑模观测器和卡尔曼滤波方法估计导弹导引头系统状态的比较研究
- 作者：Bhagyashri Tamhane;Shailaja Kurode
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Seeker System;
- Sliding Mode Observer;
- Extended Kalman Filter;
14.Numerical Simulation of Static Cracks using Extended Isogeometric Analysis

机译：基于扩展等几何分析的静态裂纹数值模拟
- 作者：G. Bhardwaj;I. V. Singh
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Edge crack;
- NURBS;
- Extended Isogeometric analysis (XIGA);
- Discontinuities;
- Enrichment Functions;
15.Simulation of Haptics Force Law using SimMechanics and Simulink

机译：基于SimMechanics和Simulink的触觉力定律仿真
- 作者：Majid H. Koul;Subir K. Saha;M. Manivannan
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Simulation;
- Haptics;
- SimMechanics;
16.'Design and Development of Turmeric Polishing Machine Energized by Human Power Flywheel Motor.' - A past review

机译：“人力飞轮电机驱动姜黄抛光机的设计与开发。”过去的回顾
- 作者：S. M. Moghe;K. S. Zakiuddin
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Human power machine;
- Turmeric polishing;
17.A Review on the Excavator Tool Bits Wear

机译：挖掘机钎头磨损研究综述
- 作者：Shiv Prakash Singh;Tanweer Alam;Somnath Chattopadhyaya
- 会议名称：《National Conference on Machines and Mechanisms;International Conference on Machines and Mechanisms》 | 2013年
- Tool bit;
- Continuous miner;
- Tool wear;
- Depth of cut;
- Cutting force;