首页>外文会议>其他>National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium

National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Come On In, the Water's Fine... But Watch Out for the Alligators: The Trials and Tribulations of an Accredited Calibration Lab

机译：来吧，水很好......但要注意鳄鱼：经过认可的校准实验室的试验和磨削
- 作者：Michael Linn
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
2.Metrology Concepts: Business's Impact on Metrology

机译：计量概念：商业对计量的影响
- 作者：Howard Zion;Phil Mistretta;Jeremy Sims
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
3.Towards a CIPM MRA Statement of Equivalence NIS Experience

机译：迈向CIPM MRA对等效的陈述NIS经验
- 作者：Ahmed A. El Sayed;Hoda M. Eissa;Ebtisam H. Hasan;Yasser A. Abdelaziz
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
4.A New Primary Vacuum Standard developed at the National Metrology Centre, Singapore

机译：新加坡国家计量中心开发的新型真空标准
- 作者：Wu Jian;Chua Hock Ann
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
- Vacuum;
- Primary Standard;
- Measurement Uncertainty;
5.A Guard-Band Strategy for Managing False-Accept Risk

机译：管理虚假接受风险的保护乐队策略
- 作者：Michael Dobbert
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
6.Calibration of Rogowski Coils at Power Frequencies Using Digital Sampling

机译：使用数字采样校准rogowski线圈的功率频率
- 作者：Branislav Djokic
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
7.The Intra Africa System for Metrology: A Technical Work Programme for 2008/2009

机译：非洲计量系统系统：2008/2009年的技术工作计划
- 作者：Wynand Louw;Hantie Greeff
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
8.Characterization of a 100 MPa Controlled Clearance Pressure Balance

机译：表征100MPa控制的间隙压力平衡
- 作者：Anil Agarwal
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
9.Comparison Between Gravimetric and Volume Transfer Calibrations Ranging from 5 to 100 U.S. Gallons

机译：重量和体积转移校准之间的比较范围从5到100 U.S.加仑
- 作者：S. Van Hyder
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
10.New Product Developmental: Partnering Between Metrology Laboratories, End-Users, and Manufacturers

机译：新产品发展：在计量实验室，最终用户和制造商之间合作
- 作者：Cory R. Peters
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
11.Primary Calibration of Vibration Transducers by Laser Interferometry and Trends

机译：激光干涉测量和趋势振动传感器的主要校准
- 作者：Guillermo Silva-Pineda
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
12.VNA Calibration Accuracy Improvement Using the Weighted Least Squares Method

机译：使用加权最小二乘法的VNA校准精度改进
- 作者：Ken Wong
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
- VNA;
- Calibration;
- Least squares;
- Regression;
- Uncertainty;
13.Towards New Absolute Long Distance Measurement Systems in Air

机译：朝着空气中的新绝对长距离测量系统
- 作者：Jean-Pierre Wallerand;Ahmed Abou-Zeid;Thomas Badr;Petr Balling;Jorma Jokela;Rupert Kugler;Michael Matus;Mikko Merimaa;Markku Poutanen;Emilio Prieto;Steven van den Berg;Massimo Zucco
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
14.Extending the Calibration Interval for Self-Adjusting Test Instrumentation

机译：扩展用于自调节测试仪器的校准间隔
- 作者：Wayne Goeke
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
15.Power Loading Effects in Precision 1 Ω Resistors

机译：功率加载效果精度1Ω电阻
- 作者：George R. Jones;Randolph E. Elmquist
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
16.Proficiency Testing in the Air Force Metrology and Calibration Program

机译：空军计量和校准程序中的能力测试
- 作者：Richard Semer;Rossano Welu
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
17.A Measurement Standard for Evaluating Metrology Positions

机译：评估计量职位的测量标准
- 作者：Danny Newcombe;Susan Reynolds
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
18.Application of multisensor measurements and sensor data fusion in coordinate metrology

机译：多传感器测量和传感器数据融合在坐标计量中的应用
- 作者：Ulrich Neuschaefer-Rube;Markus Bartscher;Uwe Hilpert
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
19.Infrared Uncertainty Budget Determination in an Industrial Application

机译：工业应用中的红外不确定性预算确定
- 作者：Frank Liebmann
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
20.The Design and Implementation of a Fully Automated Crossfloat System for the Comparison of Piston Gauges in Both Gauge and Absolute Measurement Modes

机译：用于在仪表和绝对测量模式中对活塞仪进行比较的全自动交叉过流系统的设计与实现
- 作者：Michael Bair;Pierre Delajoud;Martin Girard
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
- Pressure;
- Effective area;
- Crossfloat;
- Automation;
- Base Ratio;
- Direct Ratio;
21.CMM audit program in South Africa

机译：CMM审计计划在南非
- 作者：Floris van der Walt
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
22.Gauge Blocks - A Zombie Technology

机译：仪表块 - 僵尸技术
- 作者：Ted Doiron
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
23.Multi-Component Fringe Projection Sensors: Assistance System for Short and Robust Inspection Processes

机译：多元件边缘投影传感器：用于短型和强大的检查过程的辅助系统
- 作者：Johannes Weickmann;Albert Weckenmann;Wito Hartmann
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
24.Metrology Personnel Qualification and Development

机译：计量人员资格和发展
- 作者：Richard S. Brenia
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
25.Consistency and Clarity in Calibration Procedures

机译：校准程序中的一致性和清晰度
- 作者：J. Brent Snoddy
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
26.Industrial Consulting Activities of KRISS in Korea

机译：Kriss在韩国的工业咨询活动
- 作者：K. W. Lee;H. S. Nham;C. S. Kim;M. J. Jho;M. Kim
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
27.How Accreditation Can Improve a Dimensional Laboratory

机译：认证如何改善维度实验室
- 作者：R. Douglas Leonard
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
28.Soft Metrology Qualitative and Quantitative Approaches to the Knowledge and Measurement of Reality

机译：现实知识和测量的软计定量和定量方法
- 作者：Salvador Echeverria-Villagomez;Carmen Marina Trejo-Morales
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
29.CMM Task-specific Measurement Uncertainty

机译：CMM特定于特定的测量不确定性
- 作者：Edward Morse
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
30.Improving Humidity Measurements For Field Calibration

机译：改善现场校准的湿度测量
- 作者：Mike Johnson
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
31.Strategic Considerations in Designing Training Programmes

机译：设计培训计划的战略考虑因素
- 作者：Jackson K. Mubangizi
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
32.Air Force Calibration Interval Analysis of Test, Measurement and Diagnostic Equipment (TMDE) Based on Maintenance Data Collection (MDC)

机译：基于维护数据收集的测试，测量和诊断设备（TMDE）空气校准间隔分析（MDC）
- 作者：Scott Brockway;Tom Gorman
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
33.Developing a Good Succession Plan for Laboratories

机译：制定一个良好的实验室计划
- 作者：Dilip A. Shah
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
34.Reflections from a Metrology Intern The transformation from a student to a professional in a technical career

机译：来自计量实习生的反思从学生转变为专业技术职业
- 作者：Michelle Foncannon
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
35.Activities of APMP and its member NMIs

机译：APMP及其成员NMIS的活动
- 作者：W. G. Lee;G. B. Bahng;S. Seo;J. Lee;M. Hong
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
36.From Technician to Metrologist - Knowledge Transfer in a Nuclear Industry Calibration Lab

机译：从技术人员到计量学家 - 在核工业校准实验室中的知识转移
- 作者：Michael S. Kurzeja
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
37.Limited Calibration ... It's Not a Dirty Word!

机译：有限的校准......这不是一个肮脏的词！
- 作者：Philip Mistretta;Howard Zion;Jeremy Sims
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
38.Joe D. Simmons Memorial Scholarship

机译：Joe D. Simmons纪念奖学金
- 作者：Georgia L. Harris;Norman Belecki;Diana Poulton;Mark Lapinskes;Georgia L. Harris;J. Michael Suraci;Patricia Simmons;John Simmons
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
39.The Captive Calibration Lab Gone Commercial - The Pros and Cons

机译：俘虏校准实验室已经商业 - 利弊
- 作者：Mike Trombley
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
40.Transformer Calibration at NRC Using Thompson's Method

机译：NRC的变压器校准使用Thompson的方法
- 作者：Kenneth Kochav;Barry Wood
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
41.How Does Temperature Non-uniformity of an Annealing Furnace Affect SPRT Stability?

机译：退火炉的温度不均匀性如何影响SPRT稳定性？
- 作者：Mingjian Zhao;Rose Heaton;Rong Ding;Deming Chen;Matthew Newman
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
42.Metal Clad Fixed Point Cells for the ITS-90

机译：其-90的金属包覆固定点电池
- 作者：John P. Tavener
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
43.Metrology, An Index for Quality and Development of Third World Countries

机译：计量，第三世界国家的质量和发展指数
- 作者：E. Jerry-Lionel Ablorh
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
44.A 36 MPa Pressure Balance in Liquid Medium: Experimental Results and FEM Analysis

机译：液体介质中36MPa压平衡：实验结果和有限元分析
- 作者：Caravaggio M.;Molinar Min Beciet G.;De Maria P.;Buonanno G.
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
45.Separation Method Development for Measurement of Cd in Marine Sediment by Using ID-ICP-MS

机译：用ID-ICP-MS测量海洋沉积物中CD的分离方法开发
- 作者：Maria-Rocio Arvizu-Torres;Gustavo Pedraza Aboytes;Katrin Diemer;Reinhard Jaehrling;Detlef Schiel
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
46.Fully Automatic System for Determining the Volume of Solid Bodies

机译：全自动系统确定固体体积
- 作者：Benno Gatzemeier;Christian Buchner
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
47.Overview of RP-16 IT: Application and a new Metrology Lab

机译：RP-16概述IT：应用程序和新的计量实验室
- 作者：Douglas J. Cooper
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
48.A Bayesian Approach to Information Fusion for Sensor Networks

机译：传感器网络信息融合的贝叶斯方法
- 作者：Karin Tischler;Soeren Kamme;Fernando Puente Leon;Klaus-Dieter Sommer
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
49.Benefits of Participation in, and Organization of, Interlaboratory Comparisons

机译：参与的好处，组织的互借性比较
- 作者：Hugo Ent
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
50.Understanding Phase Noise in RF and Microwave Calibration Applications

机译：了解RF和微波校准应用中的相位噪声
- 作者：Paul C. A. Roberts
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
51.Accessing and Assessing the USMS: Infrastructure for Measurement Knowledge

机译：访问和评估USMS：用于测量知识的基础设施
- 作者：Clare M. Allocca
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
52.Assessing ISO/IEC 17025:2005 Clause 5.2 Personnel

机译：评估ISO / IEC 17025：2005年第5.2条人员
- 作者：Hershal C. Brewer
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
53.A Mathematical Approach for Evaluating Metrologist Productivity

机译：评估分度技能的数学方法
- 作者：Buddy Stricker
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
54.Using an Ice Bath to Approximate the Triple Point of Water When Calibrating Secondary Standard Platinum Resistance Thermometers

机译：使用冰浴在校准次级标准铂电阻温度计时近似水的三倍点
- 作者：John Zwak
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
55.Two Perspectives of Calibration Interval: Reliability Centered Maintenance and Metrology Community

机译：校准间隔的两个视角：可靠性中心维护和计量社区
- 作者：Ding Huang
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
56.Liquid Flow Rate Automation Uncertainty - Staying Dry

机译：液体流量自动化与不确定性 - 保持干燥
- 作者：Richard Fertell
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
57.A Proactive Approach to Maintaining the Scientist and Engineering Pipeline in Today's Challenging Environment

机译：在当今挑战环境中维护科学家和工程管道的主动方法
- 作者：D. Bruce Galloway;John V. Fishell
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
58.Small Volume Calibration Method and Apparatus

机译：小体积校准方法和装置
- 作者：Leif D. King
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
59.Procedures for the Traceability of High Resistance Standards Using a Teraohmmeter

机译：使用Teraohmmer进行高阻标准的可追溯性的程序
- 作者：Dean G. Jarrett;Marlin E. Kraft;Isabel Castro;Brett Degler;Mark Evans
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
60.Report of an Interlaboratory Comparison of 3.5 mm Coaxial 2-Port Vector Network Analyzer Measurements

机译：3.5 mm同轴2端口向量网络分析仪测量的互联比较报告
- 作者：Li Pi Su;Dexter Shelton;George Walden;Garrett Barksdale
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
61.A Discussion of Stability and Homogeneity Issues in Proficiency Testing for Calibration Laboratories

机译：探讨校准实验室熟练程度稳定性与均匀性问题
- 作者：Jeff C. Gust
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
62.Large Surface Plate Calibration Comparison of Calibration Methods for a Surface Plate

机译：表面板校准方法的大表面平板校准比较
- 作者：Orlando Espinosa;Porfirio J. Diaz;Margaret C. Baca;Barbara N. Allison
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
63.Industrial Computed Tomography, an Emerging Coordinate Measurement Technology with High Potentials

机译：工业计算断层扫描，具有高潜力的新出现坐标测量技术
- 作者：Markus Bartscher;Uwe Hilpert;Frank Haertig;Ulrich Neuschaefer-Rube;Juergen Goebbels
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
64.Vanguard for Change: Leadership and Determinants of Organizational Effectiveness for National Measurement Institutes

机译：改变的先锋：国家衡量机构组织效力的领导和决定因素
- 作者：Charles A. Motzko;C. A. Motzko
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年
65.Evaluation of Out-of-Tolerance Risk in Measuring and Test Equipment

机译：评估测量和测试设备的耐受性风险
- 作者：Rick Walker
- 会议名称：《National Conference of Standards Laboratories International Metrology's Impact on Business Workshop and Symposium》 | 2008年