首页>外文会议>其他>ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing

ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Numerical Simulation and Experiment research on Temperature Field of Steel Slab in Walking Beam Furnace

机译：行走梁钢板温度场的数值模拟与试验研究
- 作者：CHEN Chao;DING Cui-jiao;OUYANG De-gang;LIU Zhan-zeng;SONG Zhong-hua;Chen Sheng;Yang Chao
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- steel slab;
- numerical simulation;
- temperature field;
- black box experiment;
2.The defects analysis and numerical simulation of automobile brake hydro cylinder in permanent casting

机译：永久铸造汽车制动液压缸的缺陷分析与数值模拟
- 作者：Lei Rao;Lianbing Zhu;Xiaolong Li;Qiyao Hu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Brake hydro cylinder;
- Filling and solidification;
- Numerical simulation;
- Defects;
3.The morphology and evolution of Cu_6Sn_5 at the interface of Sn-2.5Ag-0.7Cu-0.1RE/Cu solder joint during the isothermal aging

机译：等温老化期间SN-2.5AG-0.7CU-0.1RE / Cu / Cu焊点界面界面的形态和演化
- 作者：Yaoli Wang;Keke Zhang;Chenyang Li;Lijuan Han
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Sn-2.5Ag-0.7Cu-0.1RE solder alloy;
- aging;
- Cu_6Sn_5;
- morphology;
4.Coarsening of particles in coarse grain heat-affected zone for Ti microalloyed steels

机译：Ti微合金钢粗晶热影响区中颗粒的粗化
- 作者：ZHANG Yingqiao;ZHANG Hanqian;LI Zhiyong
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- microalloyed steel;
- coarse grain heat-affected zone;
- TiN particles;
5.Effect of Red Extractives of Plantation Leaves on Bamboo Biomass mildewing

机译：种植植物中红色提取物对竹生物质霉菌的影响
- 作者：WU Feng-juan;PENG Wan-xi;QIN Dao-chun;LU Fang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- tree leaves;
- bamboo biomass;
- benzene/alcohol extractives;
6.Al_2O_3-TiC/Fe functionally gradient material prepared by SHS casting

机译：AL_2O_3-TIC / FE通过SHS铸造制备的功能梯度材料
- 作者：Wan-hong Zhang;Chang-lun Yuan;Yan Li
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- In situ generation;
- SHS;
- Casting;
- Surface composite material;
- FGM;
7.The St Venant Zone Extent of the Self-Balancing Longitudinal Elastic Stress

机译：ST Venant区的自平衡纵向弹性应力
- 作者：Dr. Igor P. Mazur;Dr. Sergey M. Belskii
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- continuous rolling;
- St Venant zone;
- self-balancing elastic stress;
- distribution of elastic stress;
- flatness control;
8.Research on Quartz Flat Mirror's Thermal Deformation under the Condition of Non Uniform Heating

机译：非均匀加热条件下石英平面镜热变形研究
- 作者：Suian Dai;Shengli Chang;Yong Lan;Jianfeng Luo;Fei Wang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- thermal deformation;
- finite element model;
- non uniform heating;
9.Numerical Simulation and PIV Test on Flow-field Character of Zinc-silica Composite Electrolyte

机译：锌二氧化硅复合电解质流场特征的数值模拟与PIV试验
- 作者：FAN Yunying;XU Jianxin;JIANG Yehua;WANG Wenquan
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Numerical Simulation;
- Flow Field;
- Composite Electrodeposition;
10.INVESTIGATING THE INFLUENCE OF THE POWER SUPPLY TYPE UPON THE WELD JOINTS PROPERTIES AND HEALTH CHARACTERISTICS OF THE MANUAL ARC WELDING

机译：调查电源类型对手动电弧焊接的焊接接头性能和健康特性的影响
- 作者：Ilyaschenko D.P.;Chinakhov D.A.
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- arc welding;
- power supply type;
- weld joints properties;
- health characteristics;
11.Investigation on Slurry Filling Sequence During Semi-solid Forming of Complex Aluminum Part

机译：复合铝部半固体形成过程中浆料灌装序列的研究
- 作者：Kaikun Wang;Fuyu Wang;Yuanning Wang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Thixo-forming;
- Aluminum alloy A356;
- Slurry filling sequence;
- Flow behavior;
12.THE SIMULATED CALCULATION AND OPTIMIZING EXPERIMENTAL RESEARCH OF THE RESIDUAL STRESS OF THE HEAVY RAIL STRAIGHTENING

机译：重型铁路矫直残余应力的模拟计算与优化实验研究
- 作者：LIN CHEN;JIANGUO WANG;GE LI
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- heavy rail;
- straightening;
- residual stress;
- flatness;
13.Research of Ti2AlC/TiAl(Nb, B) Composites Based on Multi-fractal Spectrum

机译：基于多分形光谱的Ti2Alc / Tial（Nb，B）复合材料研究
- 作者：Ming Wen;Yunlong Yue;Haitao Zhang;Yang Li
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- multi-fractal spectrum;
- rapid heating heat treatment;
- fractal dimension;
14.A one-point quadrature element used in Simulation of Cold Ring Rolling Process

机译：冷环轧制工艺仿真中的单点正交元件
- 作者：Xuebin Zhang;Xin Zhao;Yanmin Zhang;Zhigang Li
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- one-point quadrature;
- Hourglass control;
- finite element;
- cold ring rolling;
15.Effect of α_k on aluminium trihydroxide crystallization from sodium aluminate soluntion under Ultrasound

机译：α_K对超声铝酸钠溶液铝铝铝铝结晶的影响
- 作者：Yu-sheng Wu;Yan-ping Qu;Lin-nan Zhang;Mo Liu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- ultrasound;
- sodium aluminate solution;
- precipitation;
- aluminium trihydroxide;
16.Effection of process factors pillaring agent prepared on properties of pillared-montmorillonite

机译：对柱蒙脱土的性质制备的过程因子柱剂的影响
- 作者：Lv Xiuling
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- pillared-montmorillonite;
- pillaring agent;
- value of pH;
- adsorption capacity;
17.Research on Air Quantitative Prediction Based on Mold Filling Simulation of High Pressure Die-casting

机译：基于高压压铸模具灌装仿真的空气定量预测研究
- 作者：ZHOU Jianxin;LIU Xin;CHEN Liliang;CHEN Yang;ZOU Fei;LIAO Dunming;LIU Ruixiang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Air quantitative prediction;
- HZCAE;
- High pressure die-casting;
- Numerical simulation;
- Mold-filling process;
18.A Study on High Temperature Mechanical Properties of HRB335C Steel

机译：HRB335C钢高温力学性能研究
- 作者：Biao Wang;Chun-xiang Wu;Jiao-Cheng Ma
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
19.Numerical Study on Magnetic Field Characteristics of Typical Permanent Magnet

机译：典型永磁磁场磁场特性的数值研究
- 作者：Chang-liang SHI;Yi-shun ZHANG;Hong-guang JIAO
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- rectangular permanent magnet;
- magnetic field;
- magnetic distance;
- numerical simulation;
20.Derivation and Application for Calculation of Carbon Content in Austenitizing of Cast Iron

机译：铸铁奥氏体化计算碳含量的衍生和应用
- 作者：GONG Wenbang;LUO Li;CHEN Guodong;XIANG Gangyu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- cast iron heat treatment;
- diffusion of carbon;
- carbon content in austenite;
21.Effect of the rotating speed of centrifugal machine on Microstructures and properties of Recycled WC_P/Fe-C composites

机译：离心机旋转速度对再生WC_P / Fe-C复合材料的微观结构和性能的影响
- 作者：Yan-pei Song;Yong-kai Li;Hui-gai Wang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
22.Multirange fractal analysis of discontinuous microstructure change of In-40wt.Sn melt

机译：多连续微观结构变化的多变分形分析。％sn熔化
- 作者：Yongzhi Zhou;Haoran Geng;Mei Li;Chunjing Sun;Zhiming Wang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- multirange fractal;
- In-40wt.Sn melt;
- microstructure change;
- X-ray diffraction;
23.Effective way to improve the magnetoresistance effect in perovskite at room temperature

机译：在室温下改善钙钛矿磁阻效应的有效方法
- 作者：Huang Baoxin;Li Jian;Wang Junhua;Chen Kezheng;Liu Yihua;Mei Liangmo
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- colossal magnetoresistance;
- granular manganites;
- two-phase composites;
- spin-dependent scattering;
24.Modeling of Carburization and Thermal Stress Analysis for Ethylene Cracking Furnace Tube

机译：乙烯裂解炉管渗碳与热应力分析的建模
- 作者：Luyang Geng;Jianming Gong;Xiaoyan Qin;Limin Shen
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Ethylene cracking furnace tube;
- Carburization;
- Thermal stress analysis;
- Model;
25.Analysis of Unit and Binary Diffusion in Glow Plasma Surface Alloying Process

机译：辉光等离子体表面合金工艺中的单位和二元扩散分析
- 作者：CHEN Xuannan;GAO Yuan;LI Bing;HUANG Xuefeng
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- plasma;
- chromizing;
- Cr-Ni co-diffusion;
- diffusion;
26.Study on FEM Numerical Simulation Method for the Welding Distortion

机译：焊接失真有限元数值模拟方法研究
- 作者：LU Yao-hui;Wu Xing-wen;ZENG jing;WU Ping-bo
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- welding distortion;
- thermo-elastic-plastic method;
- inherent strains approach;
- numerical simulation;
- bogie frame;
27.Elements Diffusion Asymmetry in Transient Liquid Phase Diffusion Bonding of Dissimilar Metals

机译：不同金属瞬态液相扩散粘合的元素扩散不对称
- 作者：GAO Zeng;CHEN Sijie;XU Qin
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- TLP diffusion bonding;
- dissimilar metals;
- asymmetry;
- T91;
- TP304H;
28.Microstructures and Mechanical Properties of TiAl-based Alloys Prepared by High-energy Ball milling and Hot-Pressing Sintering

机译：高能量球磨和热压烧结制备的TiAl基合金的微观结构和力学性能
- 作者：Tianguo Wang;Qun Qin;Qiuyue Shi;Wenjun Zhang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- TiAl-based alloys;
- hot-pressing sintering;
- microstructure;
- mechanical properties;
29.Interfacial Friction of Ceramics at High Temperature Ring-Compression Test

机译：高温环形压缩试验中陶瓷界面摩擦
- 作者：WANG Huigai;SONG Yanpei;WANG Fei;ZHANG Kaifeng
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Ring compression test;
- Friction factor;
- 3Y-TZP/Al_2O_3 Ceramic;
- Hexagonal boron Nitride;
30.Numerical Simulation of Interfacial Debonding Crack in Particle Reinforced Composites

机译：颗粒增强复合材料界面剥离裂缝的数值模拟
- 作者：Xianzhang Guo;Juanxia Zhang;Zhengzhao Liang;Yafang Zhang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Numerical test;
- interface;
- particulate reinforced composite;
- crack;
31.Investigation on Nozzle Layout at Secondary Cooling Zone of Round Billet Continuous Casting

机译：圆坯连铸二次冷却区喷嘴布局的研究
- 作者：Yanyan Bi;Dengfu Chen;Jian zhang;Shuigen Wang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- round billet;
- secondary cooling;
- nozzle layout;
- temperature distribution;
32.The Resistance of SiC/Al Layered Composite to Ballistic Impacting

机译：SiC / Al分层复合材料对弹道冲击的电阻
- 作者：Dan Huang;Wu Zhao
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- layered composite;
- impact resistance;
- abrasion;
- melting erosion;
33.Valence Electron Theoretical Analysis of Mechanical Properties in Low-alloy Steel

机译：低合金钢力学性能的价值理论分析
- 作者：Sun Chuan;Li Yun-kai;Jiang Lin
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- EET;
- valence electron structure;
- mechanical property;
- low-alloy steel;
34.Effects of External Loads on the Reliability of A131 Welded Pipe with Circumferential Crack

机译：外部载荷对圆周裂纹131焊管可靠性的影响
- 作者：Bolin He;Yingxia Yu;Lixing Huo;Yufeng Zhang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- X65 pipe steel;
- A131 pipe steel;
- circumferential crack;
- reliability;
- safety assessment;
35.Numerical simulation of MIG welding arc with longitudinal magnetic field

机译：纵向磁场MIG焊弧的数值模拟
- 作者：Qiwei Wang;Sheng Zhu;Fengliang Yin;Yuanyuan Liang;Xiaoming Wang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Numerical simulation;
- MIG welding arc;
- magnetic field;
36.Optimization of Structure Parameters for Hydraulic Energy Accumulated Torpedo Launching Device

机译：液压能量累积鱼雷发射装置的结构参数优化
- 作者：TIAN Bing
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
37.Thermal Transfer Boundary Condition and Thermal Load of Piston for Torpedo Cam Engines

机译：鱼雷凸轮发动机活塞的热转印边界条件和热负荷
- 作者：XU Qin-chao;WANG Shu-zong;LIAN Yong-qing
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- cam engine;
- piston;
- heat-transfer coefficient;
- temperature field;
38.A Numerical Simulation of Microstructure Evolution of GH4169 Alloy Blade during Finish Forging

机译：GH4169合金叶片在完成锻造期间的微观结构演化的数值模拟
- 作者：G X Qi;R B Mei;F Wang;L Bao
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Blade;
- GH4169 alloy;
- Numerical simulation;
- Microstructure;
- Forging;
39.Die Forging Process Simulation of a Connecting Rod

机译：导杆锻造工艺模拟
- 作者：Lei Xu;Guangze Dai;Xingming Huang;Jing Han;Junwen Zhao
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- DEFORM-3D;
- FEM forging simulation;
- Connecting rod;
40.A study on magnetic separation washability mathematical model of pulverized coal

机译：煤粉磁分离型蓄水性数学模型研究
- 作者：Jiao Hong-guang;Li Sha;Pan Lan-ying
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- pulverized coal;
- magnetic separation;
- washability;
- mathematical model;
41.Study of carbonitride precipitates in the Fe-Cr-Mn-N hardfacing alloy

机译：Fe-Cr-Mn-N硬裂合金中碳氮化物沉淀物研究
- 作者：Ke Yang;Xiang Xie;Rui Zhou;Yefeng Bao;Yongfeng Jiang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- carbonitride precipitate;
- hardfacing alloy;
- deposit;
- thermodynamics;
42.Numerical simulation of Al ball forming process in skew rolling

机译：倾斜轧制Al球形成过程的数值模拟
- 作者：Shi Xiao-min;Wang Bao-yu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Skew rolling;
- Numerical simulation;
- Pro/E modeling;
- Al ball;
43.Finite Element Analysis and Optimization for the High Voltage Disconnector Self-elastic Contact Base on ANSYS Workbench

机译：ANSYS工作台高压隔离开关自弹性接触基座的有限元分析及优化
- 作者：Liu Weifeng;Zhang Yanmin;Song Kexing;Zhao Peifeng;Zhang Li
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Self-elastic contact;
- FEA;
- Optimization;
- ANSYS Workbench;
44.RESEARCH AND APPLICATION OF PRE-BENT AUTOMATIC CONTROL MODELS OF 100 METERS RAIL

机译：100米轨道预弯曲自动控制型号的研究与应用
- 作者：XIRONG BAO;YUYAN LIU;GE LI;LIN CHEN;JIANGUO WANG;ZHANGZHONG WU;ZHONGLIANG TIAN
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- 100 meters rail;
- pre-bent;
- control model;
45.Modeling cation distributions of PbZr_0.5Ti_0.5O_3

机译：PBZR_0.5TI_0.5O_3的建模阳离子分布
- 作者：Qun Hui;Matthew Tucker;Zhiqian Chen
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- neutron total scattering;
- Rietveld refinement;
- reverse Monte Carlo;
- cation distributions;
46.Finite element simulation of Biting Process of cold rolling strip for 6-high mill

机译：6高磨机冷轧条咬合过程的有限元模拟
- 作者：Xu MA;Jingyun MA;Zhilong FENG;Honglei CUI;Yu Yang;Yuntao LI;Jian ZHANG;Yanhong DING;Jianping LI
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Biting Process;
- FEM Simulation;
- Explicit Dynamics;
- Cold Rolling;
- 6-high mill;
47.Total Fatigue Life Prediction under Constant Amplitude Loading

机译：恒定幅度负荷下的总疲劳寿命预测
- 作者：Yuting HE;Wenjun SHU;Ronghong CUI;Liming WU;Jinqiang Du
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Crack closure effect;
- Tri-axial stress state;
- Stress ratio;
- Total fatigue life;
- Constant amplitude loading;
48.Research on New Thermal Hole Flanging Process of Connection Tube Forming in Heavy Nuclear Power Thick-wall Head

机译：重型核电力厚壁头连接管形成的新型热孔法兰工艺研究
- 作者：AN Hongping;LIU Jiansheng
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Connection Tube;
- Thermal Hole Flanging;
- Thick-wall Head;
- Pro-hole Diameter Space Ratio;
- Scaled Experiment;
49.Study on Fracture Micro-mechanics Mechanism and Dynamic Energy Absorption Property of Closed-cell Foam Metals

机译：封闭 - 细胞泡沫金属骨折微型力学机理及动态能量吸收性能研究
- 作者：Xiangfeng Lv;Yishan Pan;Xiaochun Xiao
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- closed-cell foam metal;
- dynamic energy absorption;
- micro-topography;
- micro-mechanics;
50.Arbitrary-order Spherical Harmonics Method for Coupled Heat Transfer in Semitransparent Materials

机译：半透明材料耦合热传递的任意秩序球形谐波方法
- 作者：Yanming Wang;Deming Wang;Xiaoxing Zhong;Guoqing Shi
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- semitransparent material;
- coupled heat transfer;
- numerical simulation;
- spherical harmonics method;
51.Surface finishing for Al_2O_3 ceramics

机译：AL_2O_3陶瓷表面精加工
- 作者：WANG Hong
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- alumina ceramic product;
- surface pretreatment;
- electroless copper plating;
- electrolytic coloring;
52.Simulation Study of Hydraulic Fracturing Mechanism with Heterogeneous Material

机译：异质材料水力压裂机理的仿真研究
- 作者：YANG Tian-hong;LIU Hong-lei;YU Qing-lei;Chen Shi-kuo
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- hydraulic fracturing;
- numerical simulation;
- heterogeneous material;
- asymmetrical;
53.Welding sequence optimization of TA15 airplane wall panels

机译：TA15飞机墙板的焊接序列优化
- 作者：Dong Zhibo;Wei Yanhong;Zheng Wenjian;Hu Guangxu;Ma Rui
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- welding sequence optimization;
- TA15;
- airplane wall panels;
- welding distortion;
54.Antiwear Behavior of Micro-arc Oxidated Coating Rubbing on Abrasive Paper

机译：微弧氧化涂层摩擦涂布纸的抗磨行为
- 作者：TANG Yan;XU Jinyong;YE Fangyong;GAO Cheng;ZHANG Jingchun;LIU Yajuan
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- micro arc oxidation;
- aluminium alloy;
- wear rate;
- abrasive paper;
55.Study on Blanking Force of Fine-blanking with Negative Clearance and Common Blanking for AISI-1045 through Simulation and Experiment Methods

机译：通过模拟和实验方法对AISI-1045进行阴性清除和常见消隐的微小消隐的消隐力研究
- 作者：W.F. Fan;F. Li
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Negative clearance;
- Blanking force;
- Simulation;
- Experiment;
56.Preparation of Al Foam Sandwiches and Analyzing on the Interface Solidification Microstructure

机译：Al泡沫三明治的制备及凝固微观结构的分析
- 作者：Lucai Wang;Xiaohong You;Fang WANG;Jianguo Wu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- aluminum foam;
- composite structure;
- Al Foam Sandwiches (AFS);
57.Corrosion Resistance of Ceramics and High-temperature Phase Change of Powders on Cubic Silicon Nitride

机译：立方氮化硅陶瓷陶瓷和高温相变的耐腐蚀性
- 作者：Yao Huai;Zhu Guanglin;Du Meng
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- cubic silicon nitride;
- shock wave synthesis;
- phase transformation;
- corrosion;
58.OXYGEN PHYSISORPTION CHARACTERISTICS OF COAL

机译：氧气理化特性煤炭
- 作者：Zhong Xiaoxing;Wang Deming;Lu Wei;Xin Haihui
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- coal;
- spontaneous combustion;
- low temperature;
- physisorption characteristics;
59.Optimization Design on the Mechanical Properties of Ceramic Tool and Die Material with Immune Algorithm

机译：免疫算法陶瓷工具与模具材料力学性能的优化设计
- 作者：Zhang Huifa;Xu Chonghai;Zhang Jingjie;Wang Xinghai
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Immune algorithm;
- Ceramic tool and die material;
- Mechanical property;
- Optimum design;
60.The Experimental Research of Tension and Performance of Press for 6061 Aluminum Alloy

机译：6061铝合金压力张力和性能的实验研究
- 作者：Tongmei XIAO;Jian Zhang;Zhihua WANG;Dasen BI
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Lightweight Automobile;
- 6061 alloy;
- Formability;
- Erichsen tester;
61.Study on the Ball Joint Sealing of Aluminium Control Arms

机译：铝控制臂的球关节密封研究
- 作者：TIAN Haobin;LIU Xiaohang;YU Zhongtu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Ball joint sealing;
- Revolving-reveting technology;
- Aluminium control arm;
62.Effect of AlN on microstructure and mechanical properties of Mg-Al-Zn alloy

机译：ALN对Mg-Al-Zn合金微观结构和力学性能的影响
- 作者：Peng Liu;Haoran Geng;Zhenqing Wang;Jianrong Zhu;Fusen Pan;Xiaobin Dong
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Al-Mg-Zn alloy;
- AlN;
- β-Mg17Al12;
- Tensile strength;
63.Virtual optimization of regulating and controlling on welding residual stress of Francis turbine runner

机译：弗朗西斯汽轮机跑步管焊接残余应力的虚拟优化
- 作者：Ji Shude;Liu Xuesong;Yang Jianguo;Liu Zhenlei
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- blade;
- subsection welding;
- local heating;
- welding residual stress;
64.Hot Rolling of FeSi Steels – Effects by Hot Rolling in the Two Phase Region

机译：FeSi钢的热轧 - 两相区域中的热轧效果
- 作者：J. Schneider;W. Jungnickel;W. Müller;H. Hermann;R. Kawalla
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Hot rolling;
- intercritical hot rolling;
- FeSi alloys;
- stress strain curves;
- softening behavior;
65.Numerical simulation of rotational tool shoulder shape's effect on transfer behavior of welding plastic metal in friction stir welding

机译：旋转工具肩部旋转塑料金属转移行为对摩擦搅拌焊接的数值模拟
- 作者：Ji Shude;Zhang Liguo;Jin Yanye;Luan Guohong
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- friction stir welding;
- shoulder shape;
- plastic transfer;
- numerical simulation;
66.Ultrasonic Treatment of Activated Carbon Used in Adsorption of Basic Fuchsin

机译：基础葡萄原吸附活性炭超声波处理
- 作者：Yinan Hao;Ximing Wang;Lijun Ding;Dayan Ma
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Xanthoceras sorbifolia bunge hull;
- biosorption;
- basic fuchsin;
67.Study on simulation and experiment of drilling for titanium alloys

机译：钛合金钻探模拟与实验研究
- 作者：Wu Hongbing;Jia Zhixin;Zhang Xuechang;Liu Gang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- titanium alloys;
- numerical simulation;
- drilling;
- finite element model;
68.The numerical simulation of conductive body forming process and mould design

机译：导电体形成过程和模具设计的数值模拟
- 作者：Gao jianxin;Zhao peifeng;Song kexing;Wang qing
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- open-die forging;
- casting blank–closed die forging;
- numerical simulation;
69.Forming Mechanism of Folding Defect within Closed Die Forming Car Steering Knuckle

机译：封闭式模具中折叠缺陷的形成机制
- 作者：Zhao Deying;Zhang Liandong;Sun Lina
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- steering knuckle;
- folding defect;
- closed die forming;
- numerical simulation;
- experiment study;
70.Molecular-Dynamics Studies of the Diffusion of H_2 in All-Silica ZSM-5

机译：全二氧化硅ZSM-5中H_2扩散的分子动力学研究
- 作者：Xiao-Ming Du;Yao Huang;Er-Dong Wu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Hydrogen;
- Zeolite;
- Diffusion;
- Molecular-dynamics simulation;
71.Effect of Marangoni convection on welding pool of plasma direct metal forming finite element model

机译：Marangoni对流对等离子直接金属形成有限元模型焊接池的影响
- 作者：Xia Dan;Xu Bin-Shi;Lv Yao-hui;Jiang Yi;Liu Cun-Long
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- plasma;
- rapid forming;
- temperature field;
- Marangoni convection;
72.Forces on a Circular Hole Located in Functionally Graded Material

机译：力在圆孔上，位于功能分级材料
- 作者：Xianfeng WANG;Feng XING;Norio HASEBE
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Functionally graded materials;
- Circular hole defect;
- Complex stress functions;
- Nonhomogeneous;
- Cauchy integral;
- Young's modulus;
73.Casting Process Optimization for Large Bearing Bush of Zinc-Base Alloy

机译：锌基合金大型轴承衬套的铸造工艺优化
- 作者：Gao Cun-Zhen;Yang Di-xin;Xie Jing-pei;Wang Ai-qin;Wang Wen-yan
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- High Aluminum Zinc Based Alloy;
- solidification simulation;
- shrinkage;
- ZA303 alloy;
74.Analysis on Pyrolysis Products of Phyllostachys heterocycla in Heat Charring

机译：散热杂交杂环杂环杂环杂环杂环杂环杂环杂环的分析
- 作者：ZHANG Zhong-feng;ZHOU Xian-yan;MA Qing-zhi
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Pyrolysis products;
- Phyllostachys heterocycla;
- TD-GC/MS;
75.Research on Preparation of Transparent Hydrophilic Antifogging Acrylate Resin

机译：透明亲水性丙烯酸树脂制备研究
- 作者：Hu-jing;Wu shao-long;Lou bai-yang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Acrylic resin;
- Hydrophilic;
- Antifogging;
76.Calculation Model of Punch Force During Tube Extrusion

机译：管挤压过程中冲压力的计算模型
- 作者：Zhongtang WANG;Guangxia QI;Fang WANG;Shihong ZHANG
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Tube;
- Extrusion;
- Force;
- Physical model;
77.Mathematical and physical modeling of soft cobbing process of hot rolling steels

机译：热轧钢软纤豆过程的数学与物理建模
- 作者：Dr. Igor P. Mazur;Master Tanya I. Cherkashina
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- soft cobbing;
- ingot;
- liquid metal;
- physical models;
- numerical modeling;
78.The Synthesis and Feature rearch on the Thermosensitive Hydrogels(NIPA-co-AAm)

机译：热敏水凝胶的合成和特征研究（NIPA-CO-AAM）
- 作者：Zhu Xiufang;Yang Ming;Zhang Hongxia;Nie Yujing
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Salinity;
- hydrogels;
- mechanical properties;
79.Numerical Simulation of the Stamping Forming Process Of Alloy Automobile Panel

机译：合金汽车面板冲压成型工艺的数值模拟
- 作者：Jian Zhang;Yulin NING;Bendong PENG;Zhihua WANG;Dasen BI
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- 6061 alloy;
- formability;
- deck lid outer panel;
- Dynaform;
- auto panel;
80.Microstructure Analysis of Surface Film on 8407 Die Steel Obtained by Aluminization and Oxidation

机译：通过铝化和氧化获得的8407模钢表面膜的微观结构分析
- 作者：SUN Jian;WANG Xiao-ming;ZOU Zong-shu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
81.Wear Resistance of Fe-Cr-C-TiFe Fe-based Composite Coating Prepared by Precursor Carbonization-composition Process and Plasma Cladding

机译：通过前体碳化 - 组合法制备Fe-Cr-C-TiGe Fe系复合涂料的耐磨性和等离子体包层
- 作者：Junbo Liu;Limei Wang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- precursor;
- plasma cladding;
- alloy powder;
- Fe-based composite coating;
- wear resistance;
82.Design and Optimization of Loading Trajectory for S-Skin Stretch Forming Process by Simulation

机译：模拟S-皮肤拉伸成型过程装载轨迹的设计与优化
- 作者：Zhang Yanmin;Li Xiaoqiang;Song Kexing
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- S-skin;
- stretch forming;
- loading trajectory;
- numerical simulation;
- optimization;
83.Effect of Bell-type Annealing Process on Properties of SPCC Cold-rolled Steel Sheet

机译：钟型退火工艺对SPCC冷轧钢板性能的影响
- 作者：Zhihua WANG;Yanping ZHAO;Yuntao LI;Jun WANG;Jian ZHANG
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- microstructure;
- mechanical properties;
- Bell-type annealing;
- SPCC cold-rolled steel sheet;
84.A Method of Establishing Temperature Schedule during ASP Hot Strip Rolling

机译：一种在ASP热带轧制期间建立温度时间表的方法
- 作者：Yanfeng Zhao;Dianhua Zhang;Yunbo Xu;Xiaoying Hou;Guodong Wang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- ASP (Angang Strip Production);
- X70 pipeline steel;
- BP neural network;
- temperature schedule;
- simulate;
85.The Indentation Behavior of Closed-cell Al Foam under the Flat-end Cylindrical Indenter

机译：封端圆柱压痕下闭孔Al泡沫的凹口行为
- 作者：Xinzhu Wang;Guangtao Zhou
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Al foam;
- Indentation;
- The finite element method;
86.Analysis on the critical buckling stress in the TC4 thin plate weldment

机译：TC4薄板焊临时屈曲应力分析
- 作者：Qi Xiuling;Zhang Yong
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- critical buckling stress;
- TC4 thin plate;
- welding longitudinal residual stress;
87.Analysis of the asymmetric roll bonding process by means of the slab method.

机译：通过板坯法分析不对称辊粘合过程。
- 作者：Rafael Schouwenaars;Víctor H. Jacobo;Armando Ortiz
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Roll Bonding;
- Cladding;
- Modelling;
- Adhesion;
- Slab method;
88.Analysis on Unwinding Effect of FRP-OFBG Cables

机译：FRP-OFBG电缆展开效应分析
- 作者：M. L. Ma;J. Guo;H. Li;W. L. Chen
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Building material;
- FRP;
- b-value method;
- Unwinding effect;
- Stay cable;
89.Simulation for the fluctuation effect on the dendrites growth with Phase Field Method

机译：基于相场法的枝晶生长的波动效应模拟
- 作者：Hua Hou;Yuhong Zhao
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Fluctuation;
- Dendrites;
- Phase Field Method;
- Side branches;
90.Investigation on Joining Mechanism of SiC Particle Reinforced Aluminum Matrix Composite (Al/SiCp-MMC) by Resistance Spot Welding

机译：电阻点焊的SiC颗粒增强铝基复合材料（Al / SiCP-MMC）的连接机理研究
- 作者：Xingrui LI;Wenbo TANG;Jitai NIU
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- SiC particle reinforced aluminum matrix composite;
- Resistance spot welding;
- Joining mechanism;
91.Simulation of the temperature, stress, strain field in aluminum thin-gauge high-speed casting

机译：铝薄型高速铸造温度，应力，应变场的仿真
- 作者：Xiaobo Liu;Dunsheng Wu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Thin-gauge high-speed casting;
- temperature field;
- stress field;
- strain field;
- numerical simulation;
92.Modelling of microstructure evolution during thermal processes –a hybrid deterministic-probabilistic approach

机译：热过程中微观结构演化的建模-A混合确定性 - 概率方法
- 作者：Iraj Hadi;Mohammad-Amin Jabbareh;Roghayeh Nikbakht;Hamid Assadi
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Microstructure;
- Kinetics;
- Solidification;
- Phase field modelling;
- Monte-Carlo;
93.A Study of Numerical Modelling of Liquid Filler Flow within Braze Gap on Vacuum Brazing

机译：真空钎焊中钎焊液中液体填充物流量的数值模拟研究
- 作者：Pei-Yao Li;Zhi-Shui Yu
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- vacuum brazing;
- brazing gap filling;
- numerical modelling;
94.Numerical calculations on the grating-assisted phase matching condition of high harmonic generation in photonic crystal fiber

机译：光子晶体纤维高谐波发电光栅辅助相位匹配条件的数值计算
- 作者：Haizhen Ren;Ming Zhang;Peng Guo;Linfeng Yang
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- HHG;
- femtosecond laser;
- photonic crystal fiber;
95.Study on Temperature Change Rule of Sprayed Composite Powders in Flight

机译：飞行中喷涂复合粉末的温度变化规律研究
- 作者：Liu Hongwei;Wang Jianjiang;Sun Xiaofeng;Qiu Ji
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Self-reactive Spray Forming;
- composite powder;
- temperature field;
- numerical simulation;
96.Quantitative separation of NMR signal amplitude of water in wood on the basis of T_2

机译：基于T_2的木材水中NMR信号幅度的定量分离
- 作者：MA Da-Yan;WANG Xi-Ming;ZhANG Ming-Hui;Li Xue-qi
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- Nuclear magnetic resonance;
- Water distribution in wood;
- T2;
- Scanning electron micrograph;
- Water content;
97.Investigation of precipitated hardening layer performance on machined NAK80 steel surface

机译：加工NAK80钢结构沉淀硬化层性能研究
- 作者：Yang Xinchun;Wang Hongjun
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- precipitation hardening layer;
- microhardness;
- residual stress;
98.Coupling Analysis on Hydrauic Press and Forming Moulds of the Containment of Nuclear Power Reactor

机译：液压机耦合分析及核电反应堆遏制模具
- 作者：Dasen BI;Yaodong ZHOU;Liang CHU
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- coupling analysis;
- hydraulic press;
- mould;
- equipment;
99.Mismatch Simulation of Motion Detection Pointing Device

机译：运动检测指向装置的不匹配模拟
- 作者：Bing Mo;Qi Zheng;Sihao Chen;Suki Kim
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- mismatch;
- offset voltage;
- Monte Carlo method;
100.Finite Element Simulation of the Nosing Process of Metal Tubes with a Conical Die

机译：具有锥形模具的金属管鼻管的有限元模拟
- 作者：Liang CHU;Lijun SHI;Yan BI;Dasen BI
- 会议名称：《ICPNS2010;International Conference on Physical and Numerical Simulation of Materials Processing》 | 2012年
- tube nosing process;
- finite element simulation;
- material thickness variation;