首页>外文会议>其他>International Conference on Design, Simulation, Manufacturing: The Innovation Exchange

International Conference on Design, Simulation, Manufacturing: The Innovation Exchange

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Development of an Energy Recovery Device Based on the Dynamics of a Semi-trailer

机译：基于半拖车动态的能量回收装置的开发
- 作者：Massimo Sicilia;Marco Claudio De Simone
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Heavy vehicle;
- Dynamics;
- Vehicle;
- Multibody;
- Fuel economy;
2.Possibility of Using Liquid-Metals for Gas Turbine Cooling System

机译：使用燃气轮机冷却系统使用液态金属的可能性
- 作者：Oksana Lytvynenko;Oleksandr Tarasov;Iryna Mykhailova;Olena Avdieieva
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Gas turbine;
- Cooling system;
- Two-phase model;
- Porous reservoir;
- Liquid-metal heat carrier;
- Nozzle vane;
- Gas turbine blade;
3.Improvement of the Effectiveness of General Engineering Courses Using Trainers

机译：使用培训师改善一般工程课程的有效性
- 作者：Mykola Korotun;Yuliia Denysenko;Nina Malovana;Olena Dutchenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Trainer;
- Methodological approach;
- Simulator;
- Interchangeability;
4.Design of Conveyor Control Information System Considering Transport Delay

机译：考虑运输延迟的输送控制信息系统设计
- 作者：Oleh Pihnastyi;Georgii Kozhevnikov;Tetiana Bondarenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
5.Research of Thermomechanical Processes When Processing Cylindrical Surfaces with Wear-Resistant Coatings

机译：耐磨涂层加工圆柱形表面时的热机械过程研究
- 作者：Maksym Kunitsyn;Anatoly Usov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Durability;
- Reliability;
- Wear resistance;
- Delamination;
- Thermomechanical processes;
- Diamond abrasive processing;
- Tribocorrosion;
6.Data Analysis of Readiness Programs of Machine-Building Enterprises

机译：机构企业准备计划的数据分析
- 作者：Bohdan Haidabrus;Serhiy Protsenko;Philipp Rosenberger;Janis Grabis
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Data science;
- Project management;
- IT-readiness;
- Program management;
- Machine learning;
7.Hydrodynamics of Two-Phase Upflow in a Pneumatic Classifier with the Variable Cross-Section

机译：具有变量横截面的气动分级器中两相溢流的流体动力学
- 作者：Andrii Lytvynenko;Ivan Pavlenko;Mykola Yukhymenko;Ruslan Ostroha;Jan Pitel
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Separation process;
- Gas-dispersed flow;
- Turbulent mode;
- Velocity field;
- Regression analysis;
8.Cavitational Wearing of Modified Ceramics

机译：水分磨损改性陶瓷
- 作者：Aleksandr Litvinenko;Yuriy Boyko;Bohdan Pashchenko;Yuriy Sukhenko;Evhenii Shtefan
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Modified ceramics;
- Vibration;
- Cavitation wearing;
9.The Efficiency of Refrigeration Capacity Regulation in the Ambient Air Conditioning Systems

机译：环境空调系统中制冷能力调节效率
- 作者：Eugeniy Trushliakov;Andrii Radchenko;Mykola Radchenko;Serhiy Kantor;Oleksii Zielikov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
10.The Influence of Milling Parameters on Cutting Forces in High-Speed Milling of Polymer Materials

机译：铣削参数对高速铣削聚合物材料切割力的影响
- 作者：Alper Uysal;Eshreb Dzhemilov;Ruslan Dzhemalyadinov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- High-speed milling;
- Carbon black reinforced polyamide;
- Cutting forces;
11.Finite Element Analysis of Profile Grinding Temperature

机译：轮廓磨削温度有限元分析
- 作者：Natalia Lishchenko;Vasily Larshin;Sergey Uminsky
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Curvature radius;
- Temperature field;
- Heat flux;
- Analytical model;
- Finite element method;
- FEM simulation;
12.Heat Exchange Characteristics of Trays for Concentrating Solutions in Direct Contact with Hot Gas Emissions

机译：托盘热交换特性，用于浓缩溶液与热气排放直接接触
- 作者：Musii Tseitlin;Valentyna Raiko;Oleksii Shestopalov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Thermal characteristics;
- Dual-flow tray;
- Baffle tray;
- Paset;
- Direct contact heat exchanger;
- Enthalpy exchange coefficient;
13.Estimation of Random Flow-Rate Characteristics of the Automatic Balancing Device Influence on Centrifugal Pump Efficiency

机译：估计自动平衡装置对离心泵效率影响的随机流速特性
- 作者：Yuliia Tarasevych;Ievgen Savchenko;Nataliia Sovenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Cylindrical throttle;
- Face throttle;
- Flow-rate;
- Axial force;
- Probabilistic characteristics;
- Pump efficiency;
14.Fundamentals of CAD Design of Rotary Milling Cutters for Multitooth Products

机译：用于多摩尔产品旋转铣刀CAD设计的基础
- 作者：Nataliya Ravska;Alexander Klochko;Oleksiy Ivanovskiy;Vyacheslav Vovk;Valeriya Parnenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Circular milling cutters;
- Multitooth products;
- Cutting tools;
- Step accuracy;
15.Numerical Simulation of Compression and Detonation Strokes in a Pulse Compression Detonation System

机译：脉冲压缩爆轰系统中压缩和爆炸冲程的数值模拟
- 作者：Brian Maxwell;Konstyantyn Korytchenko;Olga Shypul
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Gas compression;
- Detonation initiation;
- Pressure and density profiles;
16.Analysis of Frictional Interaction in a Couple 'Billet - Crystallizer'

机译：几个“坯料 - 结晶器”摩擦互动分析
- 作者：Oleg Khoroshylov;Oleg Podolyak;Valentina Kuryliak;Andrey Kipensky;Andrey Lomakin
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Continuous casting;
- Mold;
- Billet extraction force;
- Experimental cold billet head;
- Measuring element;
17.Influence of Weak Shock Wave on the Dynamic Stress State of Foam Materials

机译：弱冲击波对泡沫材料动态应力状态的影响
- 作者：Olena Mikulich;Lyudmila Samchuk;Yulia Povstiana
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Auxetic;
- Couple stress elasticity;
- Time domain problem;
18.Improvement of the Heat Substation Design for District Heating Supply Systems

机译：改进区供暖系统热变电站设计
- 作者：Tetiana Babak;Alexey Demirskyy;Gennadii Khavin;Viktoria Nevludova
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Heat substation;
- CAD system;
- Retrofit of heating system;
- Modeling software;
19.Influence of High-Octane Bioadditives on Physical and Chemical Properties of Low-Octane Gasoline

机译：高辛烷生物碳对低辛烷汽油物理性质的影响
- 作者：Nina Merezhko;Valentyna Tkachuk;Viktoria Romanchuk;Oksana Rechun;Oksana Zolotariova
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Gasoline;
- Operational properties;
- Quality;
- Ecological purity;
- Bioadditives;
20.Influence of Modifiers-Ligatures on the Properties of Cast Aluminum Alloy AK5M2 for the Automotive Industry

机译：改性剂 - 脱位对汽车工业铸铝合金AK5M2性能的影响
- 作者：Kristina Berladir;Tetiana Hovorun;Oleksandr Gusak;Yaroslav Reshetniak;Djanibek Khudaybergenov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Aluminium alloy;
- Silumin;
- AK5M2;
- Modifiers;
- Ligature;
- Structure;
- Hardness;
- Tensile strength;
21.Analysis of the Initial Corrosion Stage of a Steel Disk Under the Influence of Stress

机译：压力影响下钢盘初始腐蚀阶段的分析
- 作者：Vladimir Klimenko;Iryna Shuda;Tetyana Zhylenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Corrosion;
- Steel;
- Stress intensity;
22.Improvement of the Production Technology of Liquid Biofuel from Technical Fats and Oils

机译：从技术脂肪和油中改进液体生物燃料生产技术
- 作者：Mikhailo Mushtruk;Volodymyr Vasyliv;Nataliia Slobodaniuk;Roman Mukoid;Olena Deviatko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Waste;
- Animal fat;
- Vegetable oil;
- Alcohols;
- Free fatty acids;
- Transesterification;
- Bio-Fuel;
- Plant;
23.Design of New Nanocoatings Based on Hard Alloy

机译：基于硬合金的新纳米织物设计
- 作者：Viktor Popov;Gennadiy Kostyuk;Olecsandr Tymofyeyev;Kateryna Kostyk;Olena Naboka
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Highly entropic coatings;
- Submicrostructures;
- Nanostructures;
- Solid solutions;
- Intermetallide;
24.Simulation of Wearing Processes with High Sliding Speed

机译：高滑动速度磨损过程的仿真
- 作者：Aleksandr Dykha;Ruslan Sorokatyi;Volodymyr Dytyniuk
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Surface of friction;
- Markov chain;
- Tribological damage;
- Computer simulation;
- Laboratory test;
25.Method of Design of Interference Fit Based on Complex Mathematical Modeling

机译：基于复杂数学建模的干扰配合设计方法
- 作者：Vladimir Nechiporenko;Valentin Salo;Petro Litovchenko;Vladislav Yemanov;Stanislav Horielyshev
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
26.Cooling Process Intensification for Granular Mineral Fertilizers in a Multistage Fluidized Bed Device

机译：多级流化床装置中颗粒矿物肥料的冷却过程强化
- 作者：Mykola Yukhymenko;Ruslan Ostroha;Andrii Lytvynenko;Yakov Mikhajlovskiy;Jozef Bocko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Shelf cooler;
- Inclined perforated shelves;
- Active hydrodynamic mode;
- Coefficient;
- Time;
- Temperature profile;
27.Numerical Simulation of Elasto-Plastic Behavior of Isotropic Composite Materials

机译：各向同性复合材料弹塑性行为的数值模拟
- 作者：Anton Karvatskii;Ihor Mikulionok;Serhii Leleka;Vladyslav Solovei
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Composite material;
- Elastoplasticity;
- Numerical analysis;
- Implicit algorithm;
- Isostatic graphite;
28.Investigation of the Grinding Process Considering the Increase of the Active Surface of Abrasive Grains

机译：考虑磨粒活性表面增加的研磨过程研究
- 作者：Maksym Kurin;Serhii Nyshnyk;Anatolii Dolmatov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Microcutting;
- Kinematics of the process;
- Heat stress;
- Energy-Intensive processes;
- Plastic deformation;
- Dissipation energy;
- Deformation power;
29.Influence of Surface Hardened Nanocrystalline Layers on the Resistance of Contact Fatigue Destruction

机译：表面硬化纳米晶层对接触疲劳破坏抗性的影响
- 作者：Volodymyr Gurey;Ihor Hurey
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Nanocrystalline layer;
- Friction hardening;
- Residual stress;
- Contact fatigue;
30.A Numerical-Analytical Model of the Temperature Field Distribution During Orthogonal Cutting of Composites

机译：复合材料正交切割期间温度场分布的数值分析模型
- 作者：Gennadii Khavin;Magomedemin Gasanov;Alexander Permyakov;Viktoria Nevludova
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Reinforced polymers;
- Machining;
- Modeling;
- Thermal effects;
31.Development and Implementation Possibilities of 5G in Industry 4.0

机译：开发和实施5G在工业4.0中的可能性
- 作者：Dragan Perakovic;Marko Perisa;Petra Zoric;Ivan Cvitic
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Information and communication technology;
- Cellular networks;
- Industrial revolution;
- Smart manufacturing;
32.Increasing Productivity of Connecting Rods Machining

机译：增加连杆加工的生产率
- 作者：Vitalii Ivanov;Ivan Dehtiarov;Viliam Zaloga;Illia Kosov;Volodymyr Savchuk
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Complex part;
- Manufacturing process;
- Fixture design;
- Locating;
- Multiaxis machining;
- Setup time;
33.Workplace Optimization Using a Collaborative Robot

机译：使用协作机器人的工作场所优化
- 作者：Pavel Kabele;Milan Edl
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Operation;
- Robot;
- Layout;
- Production cycle;
- Analysis;
- Rationalization;
- Process;
- Improvement;
34.Parametric Optimization of Technological Layout of Modular Machine Tools

机译：模块化机床技术布局的参数优化
- 作者：Ihor Yakovenko;Alexander Permyakov;Olena Naboka;Olga Prihodko;Yurii Havryliuk
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Modular equipment;
- Tool setup;
- Multi-tool machining;
- Tool life;
- Cutting conditions;
- Mean time between failures;
35.Global Trend of Implementation of Industrial Robots Relating to Industry 4.0

机译：与工业有关的工业机器人实施全球趋势4.0
- 作者：Isak Karabegovic;Raul Turmanidze;Predrag Dasic
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Production;
- Robot;
- Automation;
- Collaborative robot;
- Industry 4.0;
36.Improvement of the Model System to Develop Eco-Friendly Bio-Utilization of Phosphogypsum

机译：改进模型系统，以发展磷酸缺口的环保生物利用
- 作者：Yelizaveta Chernysh;Koichi Hasegawa
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Environmental protection;
- Phosphogypsum;
- Modeling influence;
- E. coli;
- Bioremediation;
37.Processing of Parts Under Pulse Loading of a Vibrating Hopper

机译：振动料斗脉冲负荷处理的处理
- 作者：Volodymyr Symoniuk;Viktor Denysiuk;Yurii Lapchenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Vibroprocessing;
- Vibrosetting;
- Circulation movement;
- Electromagnetic;
- Abrasive material;
- Vibrohopper;
38.Simulation of the Process of Obtaining Nanostructures During Laser Radiation on Materials, Cutting Tools and Parts

机译：在激光辐射期间获得纳米结构的过程，切削刀具和零件的模拟
- 作者：Gennadiy Kostyuk;Viktor Popov;Mykola Nechyporuk;Olecsandr Tymofyeyev;Hanna Yevsieienkova
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Nanostructure;
- Submicrostructure;
- Technological parameters;
- Steel;
- Hard alloy;
- Pulse laser radiation;
39.Industry 4.0+: The Next Level of Intelligent and Self-optimizing Factories

机译：行业4.0+：下一级智能和自我优化工厂
- 作者：Erwin Rauch
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Industry 4.0;
- Industry 5.0;
- Society 5.0;
- Intelligent manufacturing;
- Self-optimization;
- Artificial intelligence;
- Biological transformation;
40.Experimental Research of the Excessive Water Injection Effect on Resistances in the Flow Part of a Low-Flow Aerothermopressor

机译：低流动空气换热器流动部分电阻过多注水的实验研究
- 作者：Dmytro Konovalov;Halina Kobalava;Vitaliy Maksymov;Roman Radchenko;Mykola Avdeev
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Thermogasdynamic compression;
- Injection;
- Relative pressure losses;
41.The Methodology of Obtaining Power Consumption Fuzzy Predictive Model for Enterprises

机译：获取企业电力消耗模糊预测模型的方法论
- 作者：Sergii Tymchuk;Sergii Shendryk;Vira Shendryk;Ivan Abramenko;Anastasiia Kazlauskaite
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Power consumption;
- Prediction;
- Fuzzy regression analysis;
- Prediction error;
42.Analysis of the Efficiency of Engine Inlet Air Chilling Unit with Cooling Towers

机译：冷却塔发动机入口空气冷却装置效率分析
- 作者：Andrii Radchenko;Andrzej Stachel;Serhiy Forduy;Bohdan Portnoi;Oleksandr Rizun
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Turbine;
- Climate;
- Thermal load;
- Chiller;
- Cooling tower;
- Fa;
43.Methods for Modeling Urban Road Traffic Using Timed Automata

机译：使用定时自动机建模城市道路交通的方法
- 作者：Camelia Avram;Jose Machado;Adina Astilean
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Traffic control;
- Timed automata model;
- Computer simulation;
- Formal verification;
44.Studies of the Swirling Submerged Flow Through a Confuser

机译：通过混合器旋流淹没流动的研究
- 作者：Andrii Rogovyi;Serhii Khovanskyi;Iryna Hrechka;Anatoly Gaydamaka
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Swirling flows;
- Confuser;
- Numerical simulation;
- Turbulence;
- Submerged flow;
45.Optimization of Modular Fixture Setup Time in an Automated Assembly Line

机译：自动装配线中模块化夹具设置时间的优化
- 作者：Hossein Tohidi;Tarek AlGeddawy
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Changeability;
- Robot travel path;
- TSP;
- Fixture design;
- MILP;
46.Experimental Identification of a Car Dynamic Model Using the Numerical Algorithms for Subspace State-Space System Identification

机译：子空间状态空间系统识别数值算法的汽车动力学模型的实验识别
- 作者：Antonio Lettieri;Carmine Maria Pappalardo
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
47.Influence of the Thread Profile Accuracy on Contact Pressure in Oil and Gas Pipes Connectors

机译：螺纹轮廓精度对油气管连接器接触压力的影响
- 作者：Oleh Onysko;Volodymyr Kopei;Iuliia Medvid;Lolita Pituley;Tetiana Lukan
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Threading tool-joint;
- Tapered thread;
- Finite element model;
- Process of screwing;
- Pin and box;
48.Production Planning and Setup Time Optimization: An Industrial Case Study

机译：生产规划和设置时间优化：工业案例研究
- 作者：Jose Pedro Vaz;Leonilde Varela;Bruno Goncalves;Jose Machado
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Production planning and control;
- Optimization;
- Simulation;
- Scheduling;
- Setup;
49.Characteristics of the Rotary Cup Atomizer Used as Afterburning Installation in Exhaust Gas Boiler Flue

机译：用作废气锅炉烟道旋转杯雾化器的特性
- 作者：Victoria Kornienko;Roman Radchenko;Dmytro Konovalov;Andrii Andreev;Maxim Pyrysunko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Water-fuel emulsion;
- Exhaust gas;
- Rotary cup atomizer;
- Droplet diameter;
- Atomization characteristic;
50.Research on the Energy State of the Surface of Alloys for Gas-Turbine Engine Blades

机译：燃气轮机发动机叶片合金表面的能量状态研究
- 作者：Stephan Loskutov;Dmytro Pavlenko;Dmytro Stepanov;Natalia Honchar;Olena Khavkina
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Electron work function;
- Compressor blades;
- Fatigue testing;
- Deformation processes;
51.Peculiarities of Interaction of Micro-roughnesses of Contacting Surfaces at FANT

机译：联系表面微粗糙度与景观相互作用的特性
- 作者：Ihor Shepelenko;Yakiv Nemyrovskyi;Yuri Tsekhanov;Sergii Mahopets;Oleh Bevz
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Finish anti-friction non-abrasive treatment;
- Anti-friction coating;
- Micro-cutting;
- Contact interaction;
- Cutting angle;
- Rounding radius;
52.Investigation of Waveforms of Roller Bearing's Working Surfaces on Centerless Grinding Operations

机译：滚子轴承工作表面对无心磨削作用波形的研究
- 作者：Vasyl Chalyj;Sergiy Moroz;Vitaliy Ptachenchuk;Valentyn Zablotskyj;Stanislav Prystupa
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Undulation;
- Dynamic stability;
- Centerless grinding;
- Rigid support;
53.Combined Thermo-Mechanical Techniques for Post-processing of the SLM-Printed Ni-Cr-Fe Alloy Parts

机译：组合热机械技术，用于后处理的SLM印刷Ni-Cr-Fe合金零件
- 作者：Dmytro Lesyk;Silvia Martinez;Oleksii Pedash;Vitaliy Dzhemelinskyi;Bohdan Mordyuk
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Inconel 718;
- Selective laser melting;
- Post-processing;
- Hot isostatic pressing;
- Homogenization;
- Aging;
- Shot peening;
- Ultrasonic impact treatment;
54.Design of Hydraulic Mechatronic Systems with Specified Output Characteristics

机译：指定输出特性液压机电系统的设计
- 作者：Anatolii Panchenko;Angela Voloshina;Olena Titova;Igor Panchenko;Anatoly Caldare
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Mechatronic system;
- Planetary hydraulic motor;
- Optimization criterion;
- Integral quadratic estimate;
55.Structure and Corrosion Resistance of Vacuum-Arc Multi-period CrN/Cu Coatings

机译：真空电弧多时段CRN / Cu涂料的结构和耐腐蚀性
- 作者：Hanna Postelnyk;Oleg Sobol;Ondrej Chocholaty;Sergey Knyazev
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Composite coatings;
- Bias potential;
- Phase composition;
- Corrosion rate;
- Polarization curves;
- Electrochemical impedance spectroscopy;
56.Effect of Hydrodynamic Parameters on Membrane Electrolysis Enhancement

机译：流体动力学参数对膜电解增强的影响
- 作者：Vasyl Serdiuk;Vsevolod Sklabinskyi;Svetlana Bolshanina;Alexey Ableyev;Tetiana Dychenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Cation-exchange membrane;
- Current density;
- Similarity parameters;
- Forced mixing;
57.Substantiation of Energy Parameters of a Continuous-Action Vibroextractor for a Solid-Liquid System

机译：用于固液系统的连续作用蛛丝能量参数的实质性
- 作者：Volodymyr Zavialov;Taras Mysiura;Nataliia Popova;Yuliia Zaporozhets;Valentyn Chornyi
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Vibroextraction;
- Mathematical model;
- Hydrodynamics;
- Mass transfer;
- Diffusion;
- Pulsating flow;
58.Concept Development of a Consistently Traceable Process and System Solution for Ensuring the Requirements of Engineering and Functional Safety

机译：概念开发始终如一可追溯的过程和系统解决方案，以确保工程和功能安全的要求
- 作者：Dominik Ehring;Robin Pluhnau;Arun Nagarajah
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Model-Based systems engineering;
- Bidirectional traceability;
- RFLP;
59.Adaptive Slicing in the Additive Manufacturing Process Using the Statistical Layered Analysis

机译：使用统计分层分析的添加剂制造过程中的自适应切片
- 作者：Yaroslav Garashchenko;Nina Zubkova
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Technological preparation;
- Variable step;
- Building time;
- Accuracy of shaping;
60.Service Costs in Operational Planning of Transportation with Small Batches of Cargo in City

机译：城市小批货物运输运营计划的服务成本
- 作者：Natalya Shramenko;Dmitriy Muzylyov;Vladyslav Shramenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Delivery routes;
- Vehicle load capacity;
- Small-batch cargoes;
- Process parameters;
- Costs;
61.Numerical Simulation of Local Plastic Deformations of a Cylindrical Workpiece of a Steel Wheel Rim

机译：钢轮边缘圆柱形工件局部塑性变形的数值模拟
- 作者：Yuliia Salenko;Ruslan Puzyr;Oleksandr Shevchenko;Viktoriia Kulynych;Oleksandr Pedun
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Finite-element model;
- Shell;
- Meridional stresses;
62.Gravitational Relief with Spiral Gutters, Formed by the Screw Movement of the Sinusoid

机译：用螺旋排水沟的引力浮雕，由正弦曲线的螺杆运动形成
- 作者：Sergiy Pylypaka;Tatiana Volina;Mikola Mukvich;Galina Efremova;Olena Kozlova
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Axial cross-sectional curve;
- Friction coefficient;
- Particle;
- Movement trajectory;
- Differential equations;
63.Computer-Integrated Design Pistons with the Influence of Casting Defects

机译：计算机集成设计活塞具有铸造缺陷的影响
- 作者：Oleg Akimov;Vitaliy Alyokhin;Kateryna Kostyk;Leonid Saltykov;Julia Riabets
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Computer-integrated design;
- Piston;
- Engine;
- 3D model;
- Casting defect;
64.Improvement of the Quality of Cutting Tools States Recognition Using Cloud Technologies

机译：利用云技术改进削减工具状态识别的质量
- 作者：Oleksandr Fomin;Oleksandr Derevianchenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Tool laboratory;
- States recognition;
- Cloud ML;
65.Optimization of the Technological Process Based on Analysis of Technological Damageability of Castings

机译：基于分析铸件技术可石化性的技术过程优化
- 作者：Yaroslav Kusyi;Vadym Stupnytskyy
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Casting;
- Technological damageability;
- LM-hardness analyses method;
- Weibull homogeneity coefficient;
66.Strength Properties Control of Mixtures Based on Soluble Glass with Ethereos Solidifiers

机译：基于Ethereos固体的可溶性玻璃的混合物强度性能控制
- 作者：Olga Ponomarenko;Tatyana Berlizeva;Igor Grimzin;Nataliia Yevtushenko;Tatiana Lysenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
67.Comparative Analysis of Platforms for Designing a Digital Twin

机译：数字双胞胎设计平台的比较分析
- 作者：Dmytro Adamenko;Steffen Kunnen;Arun Nagarajah
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Digital twin;
- IoT;
- Platform;
68.Structural Engineering of Nanocomposite Coatings Based on Tungsten and Titanium Carbides

机译：基于钨和碳化钛的纳米复合涂层的结构工程
- 作者：Oleg Sobol;Osman Dur
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Quasibinary system;
- Nanocomposite;
- Phase composition;
- Crystallites;
- Texture;
- Microstrain;
- Hardness;
69.Parameter Identification of the Capillary Rising Process in Nanomaterials for Evaporative Cooling Applications

机译：纳米材料中毛细血管上升过程的参数鉴定蒸发冷却应用
- 作者：Dmytro Levchenko;Ivan Pavlenko;Anton Shulumei;Marek Ochowiak;Andrii Manzharov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Evaporative cooling;
- Maisotsenko cycle;
- Porous materials;
- Capillary effect;
- Regression approach;
70.Design Calculation of Electrohydraulic Servo Drive for Technological Equipment

机译：技术设备电液伺服驱动设计计算
- 作者：Volodymyr Sokolov;Olga Porkuian;Oleg Krol;Yevhen Baturin
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Engineering method;
- Static characteristics;
- Dynamic characteristics;
- Transient process;
71.Enhancement of the Operation Efficiency of the Transport Air Conditioning System

机译：增强运输空调系统的运行效率
- 作者：Mykola Radchenko;Dariusz Mikielewicz;Veniamin Tkachenko;Michal Klugmann;Andrii Andreev
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Railway air conditioner;
- Changeable heat load;
- Liquid refrigerant recirculation;
72.Improvement of the Accuracy of Grinding by Means of Coolant Supply

机译：通过冷却剂供应改进磨削精度
- 作者：Mykhaylo Stepanov;Maryna Ivanova;Petro Litovchenko;Larysa Ivanova;Alexey Kotliar
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- External round grinding;
- Coolant supply device;
- Cutting force;
- Nozzle;
- Air curtain;
73.Operating Characteristics of Lever-Blade Shock Absorbers with the Extended Mechanical Structure

机译：伸展机械结构的杠杆叶片减震器的操作特性
- 作者：Ihor Sydorenko;Vladimir Tonkonogyi;Yuliia Babych;Yuliia Barchanova;Zhang Yiheng
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Lever-Blade shock absorbers;
- Mechanical control loop;
- Shock absorber performance;
74.Ensuring the Bending Stiffness of Pre-compressed Cantilever Boring Bars During Fine Boring

机译：确保在细小钻孔期间预压缩悬臂镗杆弯曲刚度
- 作者：Alexandr Orgiyan;Vladimir Kobelev;Vitalii Ivanov;Anna Balaniuk;Albakush Aymen
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Lock pin-drawbar;
- Cutting tool holder nut;
- Bending oscillations;
75.Ultrasonic Technology of Impregnation and Dosing Application of Liquid Epoxy Binders on Fabric Fiber Fillers

机译：液体环氧粘合剂对织物纤维填料的超声波浸渍技术
- 作者：Aleksandr Kolosov;Aleksandr Gondlyakh;Elena Kolosova;Dmitro Sidorov;Irina Kazak
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Ultrasound;
- Process;
- Device;
- Impregnation;
- Dosing;
- Application;
- Woven;
- Epoxy;
- Polymer;
76.Theoretical Analysis of Conditions for Improving Gear Grinding Accuracy and Productivity

机译：改善齿轮磨削精度和生产率条件的理论分析
- 作者：Fedir Novikov;Vladimir Polyansky;Igor Riabenkov;Andrii Hutorov;Oksana Yermolenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Abrasive wheel;
- Dead-stop grinding scheme;
- Elastic displacement;
77.Simulation of Thin-Walled Parts End Milling with Fluid Jet Support

机译：用流体射流支撑模拟薄壁零件端铣刀
- 作者：Serhii Kononenko;Sergey Dobrotvorskiy;Yevheniia Basova;Ludmila Dobrovolska;Vitalii Yepifanov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Thin-walled parts;
- Fluid jet support;
- High-speed milling;
- SPH-particles;
- Undesirable deflections;
- Oscillation amplitude;
78.Theoretical and Experimental Studies of Changes in the Workpiece Shape During Narrow Die Indentation

机译：窄模压痕期间工件形状变化的理论与实验研究
- 作者：Vitalii Chukhlib;Evhen Klemeshov;Serhii Gubskyi;Anton Okun;Nikolay Biba
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Narrow die;
- Indentation;
- Forging;
79.Numerical Simulation of the Mass-Transfer Process Between Ammonia and Water in the Absorption Chiller

机译：吸收冷却器中氨水和水之间的传质过程的数值模拟
- 作者：Michal Volf;Maryna Demianenko;Oleksandr Starynskyi;Oleksandr Liaposhchenko;Alireza Mahdavi Nejad
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Refrigerators machines;
- Chillers;
- Ammonia absorption;
- CFD;
- Eulerian model;
- Henry's law;
- Van't hoff correlation;
80.Influence of the Magnetic Field Gradient on the Efficiency of Magnetic Water Treatment

机译：磁场梯度对磁水处理效率的影响
- 作者：Ihor Roi;Iryna Vaskina;Krzysztof Jozwiakowski;Roman Vaskin;Ivan Kozii
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Magnetic water treatment;
- Aqueous solution;
- Inhomogeneous magnetic field;
- Magnetic induction change;
- Magnitude;
81.Liquid Sloshing in Circular Toroidal and Coaxial Cylindrical Shells

机译：圆形环形和同轴圆柱壳中的液体晃动
- 作者：Artem Karaiev;Elena Strelnikova
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Free liquid vibrations;
- Circular toroidal and coaxial cylindrical shells;
- Boundary element method;
82.Topology Optimization Procedure of Aircraft Mechanical Components Based on Computer-Aided Design, Multibody Dynamics, and Finite Element Analysis

机译：基于计算机辅助设计，多体动力学和有限元分析的飞机机械组件拓扑优化程序
- 作者：Adriano Gabriel Manca;Carmine Maria Pappalardo
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
83.Big Challenges of Small Manufacturing Enterprises in Industry 4.0

机译：行业小型制造企业的大挑战4.0
- 作者：Sergey Dobrotvorskiy;Yevheniia Basova;Ludmila Dobrovolska;Yevgeny Sokol;Nikolay Kazantsev
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Virtual company;
- Modular ERP-system;
- Pre-production engineering;
- Interface;
- Database;
- JavaMach cluster;
84.Object Recognition Using Neural Networks for Robotics Precision Application

机译：对象识别使用神经网络进行机器人精密应用
- 作者：Giampiero Celenta;Domenico Guida
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Object detection;
- Learning systems;
- Unmanned vehicles;
- Feedforward controllers;
- Ultrasonic sensors;
85.State-of-the-Art in Product-Service System Classification

机译：最先进的产品 - 服务系统分类
- 作者：Mariusz Salwin;Andrzej Kraslawski
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
86.Numerical Simulation of the Microstructure of Structural-Inhomogeneous Materials

机译：结构 - 不均匀材料微观结构的数值模拟
- 作者：Oleg Zabolotnyi;Viktoriya Pasternak;Igor Andrushchak;Nataliia Ilchuk;Kostiantyn Svirzhevskyi
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Porosity;
- Microstructure;
- Algorithm;
- Modelling;
- Forecasting;
- Inhomogeneous materials;
- Particle formation;
- Structural characteristics;
87.Effect of Morphological Features on Dielectric Properties of Plasma Electrolytic Oxidation Coatings on D16T Aluminum Alloy

机译：形态特征对D16T铝合金等离子体电解氧化涂层电介质性能的影响
- 作者：Elena Sevidova;Larisa Pupan;Yuriy Gutsalenko;Aleksandr Rudnev;Oksana Titarenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Morphology;
- Through porosity;
- Surface;
- Galvanostatic mode;
- Alkaline-silicate electrolyte;
- Liquid glass;
- Electricity mode;
- Current density;
- Volume resistivity;
- Electrolytic strength;
88.Multi-agent Model of Energy Consumption at the Metallurgical Enterprise

机译：冶金企业能耗的多代理模型
- 作者：Sergey Kiyko;Evgeniy Druzhinin;Oleksandr Prokhorov;Bohdan Haidabrus
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Portfolio of energy-saving projects;
- Project feasibility;
- Risk;
- Resource allocation;
- Agent model;
- Metallurgical enterprise;
89.Modeling of Spindle Node Dynamics Using the Spectral Analysis Method

机译：使用光谱分析方法建模主轴节点动态
- 作者：Oleg Krol;Volodymyr Sokolov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Spindle node;
- Frequency response data;
- Spectral windows;
90.Simulation of Bird Collision with Aircraft Laminated Glazing

机译：飞机层压玻璃鸟碰撞模拟
- 作者：Natalia Smetankina;Igor Kravchenko;Vyacheslav Merculov;Dmitry Ivchenko
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Bird strike;
- Laminated windshield;
- Safety;
91.Development of the Typical Design of the High-Pressure Stage of a Steam Turbine

机译：汽轮机高压级典型设计的发展
- 作者：Olena Avdieieva;Oleksandr Usatyi;Oleksii Vodka
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Steam turbine;
- High-pressure cylinder;
- Optimization;
- CFD;
- AxStream;
- Plan of the numerical experiment;
92.Mathematical Modeling of the Operating Process in LS Hydraulic Drive Using MatLab GUI Tools

机译：MATLAB GUI工具LS液压驱动器中操作过程的数学建模
- 作者：Oleksandr Petrov;Andrii Slabkyi;Inna Vishtak;Leonid Kozlov
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Matlab simulink;
- Mathematical model;
- Load-sensing;
- Hydraulic drive;
- Modeling of working process;
93.A Probabilistic-Statistical Model of Durability of Parts Under Cyclic Loading

机译：循环载荷下零件耐久性的概率统计模型
- 作者：Nataliia Lamnauer;Oleksandr Kupriyanov;Anton Skorkin;Oleg Kondratyuk
- 会议名称：《International Conference on Design, Simulation, Manufacturing: The Innovation Exchange》 | 2020年
- Probabilistic-statistical model;
- Strength;
- Reliability;
- Cyclic load;