首页>外文会议>其他>National Conference on Advances in Mechanical Engineering

National Conference on Advances in Mechanical Engineering

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Optimization of Cutting Parameters of Machinability Aspects During Dry Turning

机译：干式转弯过程中加工性方面切割参数的优化
- 作者：Anurag Sharma;R. C. Singh;Ranganath M. Singari
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Dry turning;
- Optimization;
- ANOVA;
- Cutting inserts;
2.Microstructure and Wear Study of Al 7075-T6/Eggshell/SiC/Al_2O_3 Hybrid Composites

机译：Al 7075-T6 /蛋壳/ SiC / AL_2O_3混合复合材料的微观结构和磨损研究
- 作者：Girija Moona;Vikas Rastogi;R. S. Walia;Rina Sharma
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Stir casting;
- Reinforcement;
- Hybrid composites;
- Microstructure;
- Tribology;
3.Comparative Study of Basin Type Double Slope Active Solar Stills Based on Energy Metrics

机译：基于能量指标的盆地型双斜坡有源太阳剧本对比研究
- 作者：Abhishek Sharma;Vijay Kumar Dwivedi;Desh Bandhu Singh
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Double slope active solar desalination systems;
- Energy metrics;
- Potable water;
4.Workplace Safety Improvement Through Quality Control Circle Approach in Heavy Engineering Industry

机译：重型工程行业质量控制圈方法工作场所安全改进
- 作者：D. Dinagaran;K. R. Balasubramanian;S. P. Sivapirakasam;Kuruva Gopanna
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Quality control circle;
- Workplace safety;
- Problem-solving steps;
5.Total Interpretive Structural Modelling of Critical Factors of Sustainable-Oriented Innovation for Indian Manufacturing MSMEs

机译：印度制造MSMES可持续型创新关键因素的总解释结构建模
- 作者：Sonal Khurana;Bisma Mannan;Abid Haleem
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Collaboration;
- Open innovation;
- Stakeholders;
- Total interpretive structural modelling;
6.Determination of the Degradation Pattern of Pump Using Two-Phase Diagnostic Bond Graph

机译：用两相诊断键图确定泵的降解模式
- 作者：Sumanta Kumar Dutta;Sawan Kumar;Tushar Kanti Saha;Sanjoy Kumar Ghoshal
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- DBG;
- RUL;
- ARRs;
7.Numerical and Experimental Investigations on Film Cooling Performance of Trench Model Embedded with Compound Angle Film Hole Jets

机译：用复合角膜孔喷射器嵌入沟槽模型薄膜冷却性能的数值和实验研究
- 作者：V. G. Krishna Anand;K. M. Parammasivam
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Compound hole jets;
- Trench model;
- Cooling effectiveness;
8.Analysis of a Double-Stage Thermoelectric Refrigerator

机译：双级热电冰箱分析
- 作者：Sudhanshu Sharma;Vijay Kumar Dwivedi
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Thermoelectric refrigerator;
- Laws of thermodynamics;
- Coefficient of performance;
- Rate of refrigeration;
9.Ballistic Performance of Thin Aluminium Cylindrical and Hemispherical Shells

机译：薄铝圆柱和半球壳的弹道性能
- 作者：Nikhil Khaire;G. Tiwari
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Cylindrical shell;
- Hemispherical shell;
- Ballistic limit;
- Energy absorption;
10.A Fractographic Study of PE, PP Self-reinforced Composites in Quasi-static Loading Conditions

机译：PE，PP自增强复合材料在准静态负载条件下的特征研究
- 作者：M. Sharan Chandran;K. Padmanabhan
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Fractography;
- PE;
- PP;
- Quasi-static;
- SEM;
11.Application of Industrial Internet of Things for Online Monitoring of Bearings

机译：工业互联互联互联网在线监测轴承
- 作者：Saroj Kumar;Parminder Singh;Shankar Sehgal;Harmesh Kumar;Naveen Aggarwal;Sarbjeet Singh;Deepam Goyal
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Industrial internet of things;
- Vibration;
- Condition monitoring;
- Bearing assembly;
- Preventive maintenance;
12.Investigation of Drivers Towards Adoption of Circular Economy: A DEMATEL Approach

机译：循环经济采用司机的调查：Dematel方法
- 作者：Annayath Maqbool;Shahbaz Khan;Abid Haleem;Mohd Imran Khan
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Circular economy;
- Drivers;
- DEMATEL;
- Supply chain management;
13.Transmissibility Along Human Segments When Exposed to Vibration

机译：沿着人体段延伸到振动时
- 作者：Arvinder Singh;Harkirat Singh;Ishbir Singh;Sachin Kalsi
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- FEM;
- Indian human subject;
- Transmissibility;
14.A Comprehensive Review on Microfluidics Technology and its Applications

机译：微流体技术及其应用综述
- 作者：Su. Venkatesan;J. Jerald;P. Asokan;R. Prabakaran
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Biocompatible;
- Characterization;
- Microchannels;
- Microfluidics;
- Plastics;
15.Robust Taguchi Based Optimization of Surface Finish During Hard Turning EN 31 with Carbon Nanotubes-Based Nano-Coated Tip

机译：基于碳纳米管基纳米涂层的硬质ZH 31的表面光洁度基于鲁棒塔卢奇的优化
- 作者：Navriti Gupta;R. S. Walia;A. K. Agrawal
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Hard turning;
- Coated tool;
- Carbon nanotubes;
- S/N ratio;
- Surface roughness;
- Cutting conditions;
16.IoT Integration in Industry-A Literature Review

机译：IOT集成在行业中 - 文献综述
- 作者：Bhavesh Chandrayan;Ravinder Kumar
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- IoT;
- Supply chain management;
- Cyber computing;
- Smart manufacturing;
- Industry internet of things (IIoT);
- Industry 4.0;
17.Defect Reduction in Manufacturing Industry Using Lean Six Sigma Approach

机译：使用瘦身六西格玛方法减少制造业的缺陷
- 作者：Narottam;K. Mathiyazhagan;Vikas Sharma
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Case study;
- Glass manufacturing;
- Defect reduction;
- Lean six sigma;
18.Acquisition of Jugular Venous Pulse Waveform by a Non-invasive Technique

机译：通过非侵入性技术获取颈静脉脉冲波形
- 作者：S. Bagyaraj;M. Ragumathulla;D. Vaithiyanathan
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Jugular vein anatomy;
- Jugular venous pulse;
- Heart diseases;
- Accelerometer;
19.Patient Pulse Rate Monitoring System Using LabVIEW

机译：使用LabVIEW的患者脉冲速率监测系统
- 作者：A. R. Krishnan;S. Jayanth;R. Janani
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- ECG electrodes;
- Body mass index;
- Temperature sensor;
- Health monitoring;
- LabVIEW;
20.Performance Analysis of Temperature and MRR Using High-Speed Micro-Drilling on Incoloy 800 Superalloy

机译：在Incoloy 800高温上使用高速微钻的温度和MRR的性能分析
- 作者：T. Venkatesan;J. Jerald;P. Asokan
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Micro-drilling;
- Material removal rate;
- Temperature;
- Grey relational analysis;
21.A Review on Solar Energy-Based Smart Greenhouse

机译：太阳能智能温室综述
- 作者：Padma Wangmo;Vinay Kumar Jadoun;Anshul Agarwal
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Solar energy;
- Greenhouse;
- Sustainable energy;
22.Analysis of Firm-Level Innovativeness Indicators

机译：公司级创新指标分析
- 作者：Sanjay Kumar;Abid Haleem;Sushil;Mohd. Asim Qadri
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Innovativeness;
- DEMATEL;
- Causal relationship;
- Impact-Relations map;
23.Evaluation of High Temperature Tribological Behaviour of Nickel Coating Using LRT

机译：利用LRT评价镍涂层高温摩擦学行为
- 作者：S. Chaudhary;R. C. Singh;Rajiv Chaudhary;Sonia
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Nickel coating;
- Taguchi analysis;
- Friction;
- Wear;
24.The Machining Characteristics of the Al7075-B_4C Nanocomposites Developed Using Ultrasonic Liquid Processor

机译：使用超声液体处理器开发的AL7075-B_4C纳米复合材料的加工特性
- 作者：Surender Kumar;P. K. Sood
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Aluminum matrix nanocomposites;
- Machining;
- Roughness;
- Cutting force;
25.Human Upper Limb Joint Torque Minimization Using Genetic Algorithm

机译：人类上肢关节扭矩使用遗传算法最小化
- 作者：Anil Kumar Gillawat;Hemant Jayantilal Nagarsheth
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Joint torques;
- Human upper limb;
- Genetic algorithm;
- Optimisation parameters;
26.Condition Monitoring of Induction Motor Using Internet of Things (IoT)

机译：使用物联网（物联网）感应电动机的状态监测
- 作者：Anurag Choudhary;Shefali Jamwal;Deepam Goyal;Rajeev Kumar Dang;Shankar Sehgal
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Condition monitoring (CM);
- Internet of things (IoT);
- Induction motor (IM);
27.Convection of Viscoplastic Fluid in U-Tube Bends

机译：U形管弯曲中粘液液的对流
- 作者：N. H. Khan;M. K. Paswan;M. A. Hassan
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Yield stress;
- Convection;
- Herschel-Bulkley model;
- Reynolds number;
28.Green Supply Chain Management: Evolution of the Concept, Practices and Trends

机译：绿色供应链管理：概念，实践和趋势的演变
- 作者：J. Martinez;K. Mathiyazhagan
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Green supply chain management;
- Trends;
- Concept;
- Practices;
- Bibliometric analysis;
29.Experimental Investigation of Microstructure and Mechanical Properties of Brass-Iron Joined by TIG Welding Process

机译：TIG焊接工艺加入黄铜铁锈和力学性能的实验研究
- 作者：J. Nithin Kumar;M. Devaiah;P. Sandeep kumar;P. Sudheer Rao
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- TIG welding;
- Brass;
- Root gap;
- Flow rate;
- SEM;
- Weld zone;
- Zinc and HAZ;
30.Experimental Study on PCM-Based External Wall Cladding for Energy Efficient Buildings

机译：基于PCM的外墙覆盖能力建筑物的实验研究
- 作者：Kolli Sravani;R. Parameshwaran;V. Vinayaka Ram
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Energy efficiency;
- Phase change material;
- Wall cladding;
- Thermal energy storage;
- Thermal properties;
31.War Field Spy and Fighter Robot

机译：战区间谍和战斗机机器人
- 作者：Manisha Bharti;Ayush Kumar Agrawal
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- War robot;
- Spy robot;
- Terror attack;
- IoT-based robot;
- Raspberry pi;
32.Conversion and Utilization of Gravitational Potential Energy for Hydraulic Excavator

机译：用于液压挖掘机的重力潜能能量的转换和利用
- 作者：Tushar Kanti Saha;Abhinav Kr. Singh;Mohit Bhola;Sumanta Kumar Dutta;Sanjoy Kumar Ghoshal
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Boom potential energy;
- Hydraulic excavator;
- Energy recovery;
- Hydraulic accumulator;
33.Design and Development of Zirconia-Dolerite Ball Plate for Error Mapping of Probe-Type Coordinate Measuring Machine

机译：探针型坐标测量机误差映射Zirconia-Dolerite球板的设计与开发
- 作者：Vinay A. Kulkarni;B. B. Ahuja
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Metrology;
- CMM;
- Zirconia balls;
- Dolerite plate;
- Thermal stability;
34.Calcium Fluoride a Potential Solid Lubricant for Green Tribology and Sustainability

机译：氟化钙为绿色摩擦学和可持续性的潜在固体润滑剂
- 作者：Sanjay Mohan;Ankush Anand;Mir Irfan Ul Haq;Ankush Raina;Rajiv Kumar
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Wear;
- Friction;
- CaF_2;
- Solid lubricant;
35.Drilling Process Improvements in EN31 Steel Under Different Environments

机译：在不同环境下EN31钢的钻井过程改进
- 作者：Manoj Kumar Sinha;Jamil Ahmad;Harish Kumar;Ranganath M. Singari
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- EN31;
- Drilling;
- Thrust force;
- Surface roughness;
- Cutting torque;
36.Rheological Characterization and Finishing Performance Evaluation of Vegetable Oil-Based Bi-dispersed Magnetorheological Finishing Fluid

机译：植物油基双分散磁流学整理液的流变鉴定与整理性能评价
- 作者：Vikas Kumar;Rajesh Kumar;Harmesh Kumar
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Magnetorheological finishing fluid;
- Magnetic field strength;
- Rheological properties;
- Surface roughness;
37.Effect of Intercritical Heat Treatment and Volume Fraction on the Morphological Properties, Mechanical Properties, and Work Hardening Behaviour of Dual-Phase Steel

机译：间临界热处理和体积分数对双相钢形态学性质，力学性能和工作硬化行为的影响
- 作者：Shubham Sharma;Jujhar Singh;N. Jayarambabu;Chander Prakash;Sunpreet Singh;Abhinav Sharma;Harish Kumar
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Intercritical annealing;
- Martensite;
- Ferrite;
- Dual-phase (DP) steel;
- Intercritical heat treatment (ICHT);
38.Recent Development in Virtual Cellular Manufacturing System

机译：虚拟蜂窝制造系统的最新发展
- 作者：P. K. Arora;Abid Haleem;Harish Kumar;Shahroz A. Khan
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Group technology;
- Machine cell;
- Part family;
- Manufacturing system;
- Cellular manufacturing system;
39.Friction and Wear Behaviour of AA2024/ZrO_2 Composites: Effect of Graphite

机译：AA2024 / ZRO_2复合材料的摩擦和磨损行为：石墨的影响
- 作者：Smridh Slathia;Rahul Anand;Mir Irfan Ul Haq;Ankush Raina;Sanjay Mohan;Rajiv Kumar;Ankush Anand
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- AA2024;
- Friction;
- Wear;
- Self-lubricating composite;
- Tribofilm;
40.Cloud Computing in Industries: A Review

机译：云计算在行业中：审查
- 作者：Zareef Askary;Ravinder Kumar
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Cloud computing;
- Industry 4.0;
- Compatibility;
- Frameworks;
41.Simulation-Based Analysis of Performance Parameters of Thrust Pad Bearing Under Thin Film Lubrication with Chamfered Inlet

机译：倒角入口薄膜润滑下推力垫轴承性能参数的仿真分析
- 作者：Poonam Kumari;Mohammad Sikandar Azam
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Thrust pad bearing;
- Thin film lubrication;
- Chamfered pad;
42.Characterization and Mechanical Properties of 2024/Y_2O_3 Composite Developed by Stir Rheocasting

机译：搅拌流杂交产生的2024 / Y_2O_3复合材料的表征和机械性能
- 作者：Semegn Cheneke Lemessa;D. Benny Karunakar
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Stir rheocasting;
- Characterization;
- Microstructure;
- Metal matrix composite;
- Mechanical properties;
43.A Low-Cost Cold Chain Suggestion for Indian Fruit and Vegetable

机译：印度水果和蔬菜的低成本冷链建议
- 作者：Vardan Parashar;Abid Haleem;J. A. Usmani
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Cold chain control;
- Fruits and vegetables;
- Shelf life;
- Temperature control;
44.Model-Based Adaptive Prognosis of a Hydraulic System

机译：基于模型的液压系统自适应预后
- 作者：Sawan Kumar;Sumanta Kumar Dutta;Sanjoy Kumar Ghoshal;J. Das
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Hydraulic system;
- RUL;
- SIR filter;
45.Effect of 3D-Printed Ankle Foot Orthosis During Walking of Foot Deformities Patients

机译：3D印刷踝脚矫形器在脚畸形患者行走过程中的影响
- 作者：Harish Kumar Banga;Parveen Kalra;Rajendra M. Belokar;Rajesh Kumar
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Additive manufacturing;
- Ankle foot orthosis (AFO);
- Gait analysis;
- Foot drop;
- Human biomechanics;
46.A Bio-inspired Climbing Robot: Dynamic Modelling and Prototype Development

机译：生物启发攀登机器人：动态建模和原型开发
- 作者：Asesh Patra;Meet Patel;Priyabrata Chattopadhyay;Anubhab Majumder;Sanjoy Kumar Ghoshal
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Bio-inspired robots;
- Bond graphs;
- Inchworm locomotion;
- Magnetic adhesion;
- Modular approach;
47.Erosive Wear Study of Nitrogen-Containing 23-8-N Austenitic Stainless Steel and Bead on Plate Weld Using ER2209 Stainless Steel Filler Wire

机译：使用ER2209不锈钢填充丝用含氮23-8-n奥氏体不锈钢和珠子珠焊珠腐蚀磨损研究
- 作者：Naveen Kumar;Navneet Arora;S. K. Goel
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- 23-8-N nitronic steel;
- Welding;
- Overlays;
- Slurry erosion;
- Cabides;
48.Influence of Alloying Compositions on the Properties of Nickel-Based Superalloys: A Review

机译：合金化组合物对镍基超合金性质的影响：综述
- 作者：Dileep Kumar Ganji;G. Rajyalakshmi
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Elemental compositions;
- Oxide formers;
- Carbide formers;
- Selection of superalloys;
49.Finite Element Modeling and Simulation of Projectile Impact on Ductile Target

机译：有限元模拟与射弹射伤模拟延性目标
- 作者：Sanan H. Khan;Servesh K. Agnihotri;Ateeb A. Khan;Afsar Husain
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Ogive nose;
- Abaqus;
- Low velocity;
- Johnson-cook model;
50.Identifying and Modelling of Constructs for Innovation Management of MSMEs: An ISM Approach

机译：MSMES创新管理构建构建的识别和建模：ISM方法
- 作者：Bisma Mannan;Sonal Khurana;Abid Haleem
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Innovation management;
- Systematic review;
- MSMEs;
- Construct;
- Interpretive structure modelling (ISM);
51.Development of Aluminium-Yttrium Oxide Metal Matrix Composite Foam Through FSP

机译：通过FSP的铝 - 钇氧化铝金属基质复合泡沫的研制
- 作者：Sachin Rathore;Ratnesh Kumar Raj Singh;K. L. A. Khan
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Friction stir processing;
- Aluminium composite;
- Foam;
- Compressive strength;
52.Effect of Electrochemical Micromachining Process Parameters on Surface Roughness and Dimensional Deviation of Ti6Al4V by Tungsten Electrode

机译：电化学微机械加工参数对钨电极表面粗糙度和尺寸尺寸偏差的影响
- 作者：Venkatasreenivasula Reddy Perla;Subbarama Kousik Suraparaju;K. J. RathanRaj;A. Sreenivasulu Reddy
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Electrochemical micromachining;
- Electrolyte;
- Tungsten tool;
- Taguchi l16 OA;
- ANOVA;
53.A New 3D Benchmarking Artifact to Evaluate Dimensional Accuracy and Geometric Tolerancing of Additive Manufacturing Technique

机译：一种新的3D基准测试伪像，以评估添加剂制造技术的尺寸精度和几何公差
- 作者：Md Qamar Tanveer;Mohd Suhaib;Abid Haleem
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Additive manufacturing;
- Benchmarking artifact;
- GDamp;
- T;
- Dimensional accuracy;
54.Modeling the Interrelationship of Critical Success Factors Adoption of Sustainable Lean Manufacturing Using DEMATEL Approach

机译：使用DEMATEL方法建模关键成功因素的相互关系，采用可持续精益制造
- 作者：Naveen Kumar;K. Mathiyazhagan
- 会议名称：《National Conference on Advances in Mechanical Engineering》 | 2020年
- Benchmarking;
- Sustainable lean manufacturing;
- Innovation;