首页>外文会议>其他>Conference of the South African Advanced Materials Initiative

Conference of the South African Advanced Materials Initiative

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Development status of the CSIR-Ti Process

机译：CSIR-TI过程的发展状况
- 作者：S J Oosthuizen;J J Swanepoel
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
2.The influence of full and partial austenitization temperatures on the quench and partition heat treatment process for an advanced high strength steel

机译：全部分奥氏体化温度对先进高强度钢淬火和隔热过程的影响
- 作者：V Kurup;C W Siyasiya;R J Mostert
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
3.Manufacturing of high added value titanium components. A South African perspective

机译：高附加值钛成分的制造。南非观点
- 作者：D Dimitrov;E Uheida;G Oosthuizen
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
4.Batch adsorption study of uranium on various ion exchange resins as an alternative method to solvent extraction

机译：铀对各种离子交换树脂的批次吸附研究作为溶剂萃取的替代方法
- 作者：J S Gama;J Barry;P L Crouse
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
5.Development of a welding platform and tool for the study of weld and process parameters, during continuous friction stir welding of AA6082-T6 sheets

机译：开发焊接平台和工具，用于研究焊接和工艺参数，在AA6082-T6薄片的连续摩擦搅拌焊接期间
- 作者：P P Chikamhi;D G Hattingh;B Dreyer
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
6.The direct observation of surface martensite formation upon cooling to temperatures close to ambient in a heat treated AISI 301 stainless steel

机译：在冷却至近距离处理AISI 301不锈钢中的温度下的表面马氏体形成的直接观察
- 作者：T W Mukarati;R J Mostert;C W Siyasiya
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
7.Determination of roll compaction parameters required for high green density, defect free Ti-6A1-4V strips

机译：测定高绿色密度所需的辊压缩参数，无缺陷Ti-6a1-4V条带
- 作者：N S Muchavi;S Chikosha;H K Chikwanda
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
8.Metal matrix composite laser metal deposition for ballistic application

机译：金属基质复合激光金属沉积弹道应用
- 作者：R Adam;A Botes;G Corderley
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
9.Numerical simulation of plastic deformation and mechanical response of strip rolled aluminium alloys

机译：条带轧铝合金塑性变形和机械响应的数值模拟
- 作者：G J Janscn van Rensburg;A E J Bogaers
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
10.Finite-element analysis of the effect of sheath-gas composition in an inductively-coupled plasma

机译：鞘气组合物在电感耦合等离子体中的有限元分析
- 作者：N J M Grobler;H Bissett;G J Puts
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
11.Evaluation of machining performance of pineapple filler based reinforced polymer composites using abrasive water jet machining process

机译：使用磨料水喷射加工过程评价菠萝填料基纤维增强聚合物复合材料的加工性能
- 作者：Jagadish;Kapil Gupta;Maran Rajakumaran
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
12.Structural integrity and dispersion characteristics of carbon nanotubes in titanium-based alloy

机译：钛基合金中碳纳米管的结构完整性和分散特性
- 作者：A M Okoro;R Machaka;S S Lephuthing
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
13.Evaluating extrudability of particle-reinforced 2124-A1 MMCs and MMNCs within the warm working temperature range (170-280°C)

机译：评估粒子增强2124-A1MMC和MMNC在温暖的工作温度范围内（170-280°C）的可挤出性
- 作者：Zizo Gxowa;Lesley H. Chown;Conasagren Govender
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
14.The effect of selective laser melting build orientation on the mechanical properties of AlSilOMg parts

机译：选择性激光熔化在山西硅零件力学性能下的影响
- 作者：B J Mfusi;L C Tshabalala;A P I Popoola
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
15.The effect of vanadium on structure and martensitic transformation temperature of TiPt alloy

机译：钒对Tipt合金结构和马氏体转化温度的影响
- 作者：S Chikosha;M L Mahlatji;R Modiba
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
16.Cytocompatibility evaluation of nano-sintered Ti-15Zr-4Nb-2Ta-0.2Pd alloy produced by spark plasma sintering technique

机译：通过火花等离子体烧结技术产生的纳米烧结Ti-15ZR-4NB-2TA-0.2PD合金的细胞锁定性评价
- 作者：Annastasia Mantshiu;Wallace Matizamhuka;Akiko Yamamoto
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
17.Effect of heat treatment on strength and ductility of 52CrMoV4 spring steel.

机译：热处理对52crmov4弹簧钢强度和延展性的影响。
- 作者：VJ Matjeke;G Mukwevho;AM Maleka
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
18.Synthesis of a Novel Amphiphilic Nano-Chitosan Material

机译：新型两亲纳米壳聚糖材料的合成
- 作者：W M R Matshe;L Tshweu;M O Balogun
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
19.Effect of putrefied quenching oil on the transformation behaviour of railway spring steel.

机译：腐蚀淬火油对铁路弹簧钢变换行为的影响。
- 作者：V.J. Matjeke;G. Mukwevho;J.W. van der Merwe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
20.Effect of milling parameters on the dispersion characteristics of multi-walled carbon nanotubes in transition metal oxides

机译：铣削参数对过渡金属氧化物多壁碳纳米管分散特性的影响
- 作者：S S Lephuthing;A M Okoro;M Lesufi
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
21.Thermodynamic stability of doped FeAl-X (X = Pd, Ag, Pt and Ru) systems

机译：掺杂FEAL-X的热力学稳定性（X = PD，AG，PT和RU）系统
- 作者：C S Mkhonto;H R Chauke;P E Ngoepe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
22.Concentration of rare earth elements from monazite by selective precipitation

机译：通过选择性沉淀，从单一的稀土元素浓缩
- 作者：S M Xaba;M Nete;W Purcell
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
23.Spark plasma sintered Ti6A14V-Zr02 bio-composites: optimization of ball milling and turbula mixing of powders and their subsequent sintering parameters

机译：火花等离子体烧结Ti6a14V-ZR02生物复合材料：优化粉末球磨和涡轮晶晶混合及其随后的烧结参数
- 作者：N A Moshokoa;T V Mukhudwana;L M Raganya
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
24.Investigation of corrosion behaviour of carbon steel in simulated soil solution from anodic component of polarisation curve

机译：偏振曲线阳极组分模拟土壤溶液中碳钢腐蚀行为研究
- 作者：Phumlani Mjwana;Mandla Mahlobo;Obadele Babatunde
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
25.Investigation of abnormal corrosion of 10.5 - 12.5 chromium ferritic stainless steel used to fabricate railway coal wagons

机译：10.5 - 12.5铬铁铁钢异常腐蚀的调查用于制造铁路煤炭货车的铁路铁料不锈钢
- 作者：TC Mamphekgo;V J Matjeke;K Pillay
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
26.Effect of milling speed on the formation of Ti-6Al-4V via mechanical alloying

机译：铣削速度对通过机械合金化形成Ti-6Al-4V的影响
- 作者：P Daswa;Z Gxowa;MJI Monareng
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
27.The effect of specimen geometry on tensile properties of titanium alloy metal sheet.

机译：试样几何形状对钛合金金属板拉伸性能的影响。
- 作者：M S Masete;N S Muchavi;S Chikosha
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
28.Flow-induced corrosion behaviour of low alloy steel in the presence of mono-ethylene glycol

机译：单乙二醇存在下低合金钢的流动诱导的腐蚀行为
- 作者：Sunday Aribo;Mantsha Sesheweni;Olufemi Sanumi
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
29.A study of the machinability of Ti-6A1-4V compacted powders

机译：Ti-6a1-4V压实粉末的研究
- 作者：M T Tambani;C Machio;D M Madyira
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
30.Computational study of binary titanium-based potential shape memory alloys

机译：基于二元钛的潜在形状记忆合金的计算研究
- 作者：M E Baloyi;R Modiba
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
31.Computational modelling of Ti_(50)Pt_(so-x)V_x potential shape memory alloys

机译：TI_（50）PT_（SO-X）V_X电位形状记忆合金的计算建模
- 作者：R Modiba;E Baloyi;S Chikosha
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
32.Development and Process Verification of a Linear Friction Welding Platform for Small Axis-Symmetrical Ti6A14V Components

机译：小轴对称Ti6a14V部件线性摩擦焊接平台的开发和处理验证
- 作者：N T A Mohlala;D G Hattingh;W Rail
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
33.Mechanical properties and stability of TiPt-M (M= Ru, Co, Cu, Zr and Hf) for high temperature applications

机译：高温应用Tipt-M（m = Ru，Co，Cu，Zr和HF）的机械性能和稳定性
- 作者：M P Mashamaite;H R Chauke;P E Ngoepe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
34.Interatomic potential parameters for Li-Cl-Ti interaction

机译：LI-CL-TI相互作用的间隙潜在参数
- 作者：A F Mazibuko;H R Chauke;P E Ngoepe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
35.Exploring Micro-focus X-ray computed tomography for metal injection moulded green parts

机译：探索金属注塑的微焦X射线计算断层扫描模型
- 作者：M Scerane
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
36.Densiflcation behavior of spark plasma sintered duplex stainless steel reinforced with TiN nanoparticles

机译：用锡纳米粒子加固火花等离子体烧结双相不锈钢的致密行为
- 作者：S R Oke;O O Ige;O E Falodun
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
37.Research and Development of Ti and Ti alloys: Past, present and future

机译：Ti和Ti合金的研究与开发：过去，现在和未来
- 作者：Kalenda Mutombo
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
38.Synthesis and Characterization of Tantalum Oxide Deposited By Metal-Organic Chemical Vapour Deposition (MOCVD)

机译：金属 - 有机化学气相沉积（MOCVD）沉积钽氧化物的合成与表征
- 作者：S O Jeje;O O Akinwunmi;M B Shongwe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
39.Development and characterization of nanocrystalline cobalt powder prepared via high energy ball milling process

机译：通过高能球铣削过程制备的纳米晶钴粉的发展与鉴定
- 作者：A L Rominiyi;M B Shongwe;B J Babalola
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
40.Synthesis, characterization and antimicrobial activities of quaternary chitosan-based materials

机译：季壳多糖基材料的合成，表征和抗微生物活性
- 作者：Zamani Cele;Lindokuhle Ndlandla;Anou Somboro
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
41.On Machinability of Titanium Grade 4 under Minimum Quantity Lubrication Assisted High Speed Machining

机译：最小数量润滑下钛等级的可加工性辅助高速加工
- 作者：T N Mathonsi;R F Laubscher;K Gupta
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
42.Sintering Performance and Corrosion behavior of biomedical Ti-24Nb-4Zr-8Sn alloy produced using SPS in various simulated body solutions

机译：使用SPS在各种模拟体系中生产的生物医学TI-24NB-4ZR-8SN合金的烧结性能和腐蚀行为
- 作者：J Madonsela;W Matizamhuka;R Machaka
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
43.A comparative corrosion study of titanium strips produced by wrought and direct powder rolling processes

机译：由锻造和直接粉末轧制工艺生产的钛条的比较腐蚀研究
- 作者：N Mothopeng;N Maledi;M Maminza
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
44.A comparative study of oxygen pick-up of TiHDH powder during press and sinter and loose sintering processing

机译：烧结烧结过程中TIHDH粉末氧捡起的对比研究及烧结加工
- 作者：T M Motsai;S Chikosha;C Machio
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
45.Computational chemistry study of zirconium monomers in low acid concentration aqueous solutions

机译：低酸浓度水溶液中锆单体的计算化学研究
- 作者：D B Jansen van Vuuren;H M Krieg;C G C E van Sittert
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
46.Phase analyses of the Co-Fe-Pd ternary alloys

机译：Co-Fe-Pd三元合金的相分析
- 作者：K Dyal Ukabhai;I A Mwamba;L A Cornish
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
47.Metal injection moulding of a 17-4 PR stainless steel: a comparative study of mechanical properties

机译：17-4 PR不锈钢的金属注射成型：机械性能的比较研究
- 作者：Ronald Machaka
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
48.Characterization of A356 investment cast component produced using controlled liquid metal cooling technique

机译：采用受控液金属冷却技术制备A356投资铸件的特征
- 作者：TF Sishuba;P Rossouw;U Curie
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
49.Process optimization of rotary friction welding of Ti-6A1-4V alloy rods

机译：Ti-6a1-4V合金棒旋转摩擦焊接的过程优化
- 作者：MC Zulu;PM Mashinini
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2018年
50.Prospects of graphite - polypropylene/epoxy blend composite for high performance bipolar plate in polymer electrolyte membrane fuel cell

机译：高性能双极板在聚合物电解质膜燃料电池中的石墨 - 聚丙烯/环氧混合物复合材料的前景
- 作者：O A Alo;I O Otunniyi;HCVZ Pienaar
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
51.Plasma dissociation of monazite

机译：单叠岩的血浆解离
- 作者：H Bissett;M M Makhofane;R van der Merwe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
52.Effect of intercritical annealing of normalised Nb-Ti-V microalloyed plate steel on microstructural evolution

机译：归一化Nb-Ti-V微合金化板钢临界退火对微结构演化的影响
- 作者：PI Kambilinya;CW Siyasiya;KM Banks
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
53.Development of MgAl2O4 grain refiner in Al in-situ composite through H3BO3 addition

机译：通过H3BO3添加研发MgAl2O4晶粒晶粒al的原位复合材料
- 作者：P Chandramohan;P A Olubambi;R Raghu
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
54.The effect of ternary alloying with vanadium on Ti-Pt shape memory alloys

机译：三元合金化与钒对Ti-Pt形记忆合金的影响
- 作者：P Daswa;S Chikosha;M L Mahlatji
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
55.Preparation and characterization of glass-ceramic composites from South African coal fly ash

机译：南非煤粉煤灰的玻璃 - 陶瓷复合材料的制备与表征
- 作者：A Modiga;N Sosibo;N Singh
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
56.Relationship between tool tilt angle, shoulder plunge depth and process energy input for pin-less friction stir welded thin Ti-6Al-4V sheets

机译：刀具倾斜角度，肩部插入深度和工艺能量输入之间的关系，用于减少摩擦搅拌焊接薄Ti-6Al-4V薄片
- 作者：A B Gili;D G Hattingh;D Bernard
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
57.Influence of Impeller Diameter on the Performance of Centrifugal pumps

机译：叶轮直径对离心泵性能的影响
- 作者：M E Matlakala;D V V Kallon;K E Mogapi
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
58.Exploring the potential of N-acylated chitosan for the removal of toxic pollutants from wastewater

机译：探索N-酰化壳聚糖的潜力，用于从废水中去除有毒污染物
- 作者：S Naidoo;N Nomadolo;W M R Matshe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
59.Major determinant of service life in magnesia-graphite slagline refractory lining in secondary steelmaking ladle furnace

机译：二级钢制制造钢管炉渣泥浆耐火材料稀释衬里的主要决定因素
- 作者：I O Otunniyi;Z V Theko;B L E Mokoena
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
60.SiC and Al surface cladding of Ti-6Al-4V for improved wear properties - The binary advantage

机译：Ti-6al-4V的SiC和Al表面包层，用于改善磨损性能 - 二元优势
- 作者：U O Okoli;I O Otunniyi;I D Adebiyi
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
61.Fretting Biocorrosion Behaviour of Titanium-Zirconia composites in Foetal Bovine Serum

机译：胎儿牛血清中钛 - 氧化锆复合材料的烦恼生物腐蚀行为
- 作者：L Semetse;B A Obadele;L Raganya
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
62.Microstructure characterisation and microhardness of P92 steel heat treated at the transformation temperatures

机译：转化温度下P92钢热的微观结构及微硬度
- 作者：J Obiko;L H Chown;D J Whitefield
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
63.Effect of the quench temperature on the mechanical properties of a medium C Mn high Si steel during QP heat treatment process

机译：淬火温度对Q＆P热处理过程中介质C Mn高Si钢力学性能的影响
- 作者：V Kurup;C W Siyasiya;R J Mostert
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
64.Tensile properties and microstructural characterization of additive manufactured, investment cast and wrought Ti6Al4V alloy

机译：添加剂制造，投资铸造和锻造Ti6Al4V合金的拉伸性能和微观结构表征
- 作者：K Beyl;K Mutombo;C P Kloppers
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
65.Solar photocatalytic hydrogen production from glycerol reforming using ternary Cu/THS/Graphene

机译：使用三元Cu / THS /石墨烯从甘油改造中的太阳能光催化氢气产生
- 作者：T W P Seadira;S J Baloyi;C M Masuku
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
66.Studying the effect of surface conditioning on the corrosion performance of titanium dental implants

机译：研究表面调理对钛牙科植入物腐蚀性能的影响
- 作者：N D E Masia;M Smit;A I Mwamba
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
67.Carbide-free bainitic steels for rail wheel applications

机译：轨道车轮应用的无碳纤面钢
- 作者：A Kapito;R J Mostert;W E Stumpf
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
68.Development of lining materials for reactor vessel used in the CSIR titanium process

机译：CSIR钛工艺中使用的反应器容器衬里材料的研制
- 作者：M P Sehoana;S Fazluddin
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
69.The effect of soaking and tempering temperatures on high vanadium alloys for grinding media

机译：浸泡和回火温度对研磨介质高钒合金的影响
- 作者：AD Mabeba;CW Siyasiya
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
70.Influence of stress relieving thermal cycles on AISI10Mg specimens produced by selective laser melting

机译：应激缓解热循环对选择性激光熔化产生的AISI10mg标本的影响
- 作者：B J Mfusi;N R Mathe;P A I Popoola
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
71.Influence of sintering temperature on densification, microstructure and mechanical properties of Ti-6Ni alloy developed via spark plasma sintering

机译：烧结温度对通过火花等离子体烧结开发的Ti-6NI合金致密化，微观结构和力学性能的影响
- 作者：A L Rominiyi;M B Shongwe;N B Maledi
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
72.Morphological characterization of recycled powder and microstructures of Ti-6Al-4V components synthesized by LENS additive manufacturing

机译：通过晶状体添加剂制造合成的Ti-6Al-4V组分的再生粉末的形态学特性
- 作者：P N Sibisi;A P I Popoola;N K K Arthur
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
73.First-principles studies on the structural, electronic and mechanical properties of L10 and L12 FexPt_(1-x) alloys

机译：第一原理研究L10和L12 Fexpt_（1-x）合金的结构，电子和机械性能
- 作者：N L Lethole;H R Chauke;P E Ngoepe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
74.Development of a mathematical equation describing the strain hardening behaviour of metastable AISI 301 austenitic stainless steel

机译：一种描述亚氮化AISI 301奥氏体不锈钢应变硬化行为的数学方程
- 作者：T W Mukarati;R J Mostert;C W Siyasiya
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
75.Influence of Heat Treatment on Microstructure and Mechanical Properties of Ni-Fe-Co Ternary Alloy Prepared via Spark Plasma Sintering

机译：热处理对通过火花等离子体烧结制备的Ni-Fe-Co三元合金微观结构和力学性能的影响
- 作者：I M C Bopape;M B Shongwe;E N Ogunmuyiwa
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
76.Influence of spark plasma sintering temperature on the densification and micro-hardness behaviour of Ni-Cr-Al alloy

机译：火花等离子体烧结温度对Ni-Cr-Al合金致密化和微硬度行为的影响
- 作者：B J Babalola;M B Shongwe;S O Jeje
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
77.Effect of Temperature on Bensification, Microstructural Evolution and Mechanical Properties of Ti-5Al-1Mo Developed via Spark Plasma Sintering

机译：温度对Ti-5Al-1Mo的致密化，微观结构演化和力学性能的影响通过火花等离子体烧结开发
- 作者：S O Jeje;M B Shoogwe;N Maledi
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
78.Density functional theory study of TiPd alloying with Os as potential high temperature shape memory alloys

机译：DIPD与OS作为潜在高温形状记忆合金的密度函数理论研究
- 作者：R G Diale;R Modiba;P E Ngoepe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
79.Kinetic study of phenol oxidation in a trickle bed reactor over Al/Zr-pillared clay catalyst

机译：Al / ZR柱粘土催化剂滴床反应器中苯酚氧化的动力学研究
- 作者：T J Makatsa;S J Baloyi;T A Ntho
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
80.Development of a biocompatible Ti-Nb alloy for orthopaedic applications

机译：用于整形外科应用的生物相容性Ti-NB合金的研制
- 作者：L Fikeni;K A Annan;M Seerane
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
81.Investigation of graphene-based nanocomposite for hydrogen storage

机译：基于石墨烯的储氢纳米复合材料研究
- 作者：S J Baloyi;A Ngqalakwezi;D Nkazi
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
82.Development and characterization of porous Ti-Sn-SiC composite intended for biomedical application

机译：用于生物医学应用的多孔Ti-Sn-SiC复合材料的开发与表征
- 作者：C R Mathebula;W Matizambuka;A S Bolokang
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
83.Pillared interlayered clays as catalyst for wastewater treatment: Cost-effective and sustainable materials

机译：柱状夹层粘土作为废水处理催化剂：具有成本效益和可持续的材料
- 作者：S J Baloyi;T W P Seadira;T A Ntho
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
84.The microstructural and mechanical characterization of the p-type Ti-11.1Mo-10.8Nb alloy for biomedical applications

机译：P型Ti-11.1Mo-10.8NB合金用于生物医学应用的微观和力学表征
- 作者：M L Raganya;N M Moshokoa;B Obadele
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
85.Influence of warm temperature (0.3-0.5Tm) uniaxial compression on the distribution of reinforcing particles in a 2124-Al/10SiC MMC

机译：温度（0.3-0.5Tm）单轴压缩对2124 - Al / 10％SiC MMC中增强颗粒分布的影响
- 作者：Z Gxowa-Penxa;L H Chown;G Govender
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
86.Biocompatibility Study of Ti-based Alloys Fabricated by Spark Plasma Sintering

机译：火花等离子体烧结制造的Ti基合金的生物相容性研究
- 作者：M R Mahundla;W R Matizamhuka;R Machaka
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
87.Preparation and microstructural characterization of the 60Al-40V master alloy

机译：60A-40V主合金的制备和微观结构表征
- 作者：T O Mapoli;K A Annan;C W Siyasiya
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
88.Effect of particle size distribution on green properties and sintering of Ti-6Al-4V

机译：粒度分布对TI-6AL-4V的绿色性质和烧结的影响
- 作者：K Ramabulana;M Tambani;C Machio
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
89.The effects of Ru, Cu, Zr and Hf on mechanical properties in Ti-Pt high temperature shape memory alloys

机译：ru，Cu，Zr和Hf对Ti-Pt高温形状记忆合金机械性能的影响
- 作者：M P Mashamaite;H R Chauke;P E Ngoepe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
90.Effects of Mo content on the microstructural and mechanical properties of as-cast Ti-Mo alloys

机译：Mo含量对铸造Ti-Mo合金微观结构和力学性能的影响
- 作者：N Moshokoa;L Raganya;B Obadele
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
91.The effect of molar ratio and flow velocity on the surface area required for pertraction of a Zr/Hf mixture

机译：摩尔比和流速对Zr / HF混合物毫条术所需的表面积的影响
- 作者：D Malan;DJ van der Westhuizen;HWJP Neomagus
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
92.EBSD characterisation of the B2 orientation in γ-TiAl based alloy

机译：γ-TiA1合金中B2取向的EBSD表征
- 作者：M N Mathabathe;A S Bolokang;G Govender
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
93.The effect of cast structures on texture and mechanical properties of AISI 433 ferritic stainless steel

机译：铸造结构对AISI 433铁素体不锈钢质地和力学性能的影响
- 作者：M Maumela;W E Stumpf;C W Siyasiya
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
94.Effect of powder bed preheating on distortion and mechanical properties in high speed selective laser melting

机译：粉床预热对高速选择性激光熔化的变形和力学性能的影响
- 作者：L P Motibane;L C Tshabalala;N R Mathe
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
95.Metal injection moulding of 17-4PH stainless steel: Effects of porosity on the mechanical properties of the sintered products

机译：17-4PH不锈钢金属注塑成型：孔隙率对烧结产品的机械性能的影响
- 作者：M N Seerane;R Machaka
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
96.Thermo-mechanical simulation of steam turbine blade with spark plasma sintering fabricated Inconel 738LC superalloy properties

机译：火花等离子体烧结制造的Inconel 738LC超合金性能的热机械仿真
- 作者：O F Ogunbiyi;S A Salifu;T Jamiru
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年
97.Effect of nickel powder particle size on the microstructure and thermophysical properties of spark plasma sintered NiCrCoAlTiW-Ta superalloy

机译：镍粉粒度对放电等离子烧结NiCrCoAlTiW-Ta高温合金组织和热物理性能的影响
- 作者：O F Ogunbiyi;T Jamiru;E R Sadiku
- 会议名称：《Conference of the South African Advanced Materials Initiative》 | 2020年