首页>外文会议>其他>International Conference on Advances in Mechanical, Industrial, Automation and Management Systems

International Conference on Advances in Mechanical, Industrial, Automation and Management Systems

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.A Two-Kernel based Strategy for Performing Assembly in FEA on the Graphics Processing Unit

机译：基于两个内核在图形处理单元上执行FEA的组装策略
- 作者：Subhajit Sanfui;Deepak Sharma
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- FEA;
- Assembly;
- GPGPU;
- Sparse Storage;
2.Theoretical and Experimental Analysis of Direct Evaporative Cooler with Fin Structured Pads

机译：翅片结构垫直接蒸发冷却器的理论与实验分析
- 作者：Ashutosh Singh;Rahul Dev
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Direct evaporative cooler;
- Evaporative cooling;
- Evaporative air cooler;
- Fin Structured Pads;
3.Incorporating Risk and Opportunities in Evaluation of Green Supplier:--An ANP Based Approach

机译：纳入绿色供应商评估的风险和机会： - 基于ANP的方法
- 作者：Ashish Kumar Rathore;Rakesh Narain
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- green supply chain management;
- supplier selection;
- analytical network process;
- opportunities and risks;
4.Triply periodic minimal surface based geometry design of bio-scaffolds

机译：基于生物脚手架的三个周期性的最小表面几何设计
- 作者：Yogesh Tripathi;Mukul Shukla
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- bone scaffolds;
- TPMS;
- computer-aided design;
- additive manufacturind;
- porosity;
- rendering of scaffolds;
5.Detection of steady flow Zone with a cooling pad using Wind Tunnel

机译：使用风洞检测冷却垫的稳态流量区
- 作者：Sunil Akant;H. T. Thorat
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Wind Tunnel;
- Evaporative cooling;
- Steady and unsteady flow;
- wind velocity;
- Fan-Pad system;
6.Lattice Modeling and Finite Element Simulation for Additive Manufacturing of Porous Scaffolds

机译：多孔支架添加剂制造的格子建模与有限元模拟
- 作者：Surya Pratap Singh;Tarun Bhardwaj;Mukul Shukla
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Lattice Structure;
- Orthopaedic implants;
- Porous Scaffolds;
- Additive Manufacturing;
- FEA;
7.Fuzzy Embedded Imperialist Competitive Algorithm (ICA) for Multi-Response Optimization during Machining of CFRP (Epoxy) Composites

机译：CFRP（环氧树脂）复合材料加工过程中的多响应优化的模糊嵌入式帝国主义竞争算法（ICA）
- 作者：Kumar Abhishek;Saurav Datta;Manoj Masanta;Siba Sankar Mahapatra
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
8.Ranking of Vitrified Grinding Wheel Parameters by using Analytical Hierarchical Process (AHP) for Surface Roughness of Work Piece in Grinding Operation

机译：通过使用分析层次过程（AHP）对磨削操作的表面粗糙度进行玻璃化磨轮参数的排序
- 作者：Sanjay S Patil;Yogesh J. Bhalerao
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Grinding operation;
- grinding wheel;
- Ranking;
- surface finish;
- Analytical Hierarchical Process (AHP);
9.Some Heuristics of Helical Sweep Surfaces in ISO 10303 STEP AP203 File to Identify Threaded Features

机译：ISO 10303步骤AP203文件中的螺旋扫曲面的一些启发式识别线程功能
- 作者：Bitla Venu;Venkateswara Rao Komma
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- STEP;
- feature;
- geometry;
- solid model;
10.Counteracting the Barriers to Adoption of Mass Customization Practices in Indian SMEs: A Case of Furniture Industry

机译：在印度中小企业采用大规模定制实践的障碍：家具行业的案例
- 作者：Inayatullah;Rakesh Narain
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
11.Effect of Alcohol Addition to Diesel on Engine Performance, Combustion and Emission Characteristics of a CI Engine

机译：柴油对柴油对CI发动机发动机性能，燃烧和排放特性的影响
- 作者：Ambarish Datta;Bijan Kumar Mandal
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Simulation;
- Diesel;
- Ethanol;
- Methanol;
- Performance;
- Combustion;
- Emission;
- Diesel Engine;
12.Application of Soft Computing Techniques for Cell Formation Problems: A Review

机译：软计算技术在细胞形成问题中的应用：综述
- 作者：Seema;A. R. Dixit
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- component;
- formatting;
- style;
- styling;
- insert;
13.Design and Development of a Special Purpose Machine for glass insertion in plastic frame for spill guard glass shelf assembly of commercial Refrigerators

机译：商用冰箱溢出玻璃架组装塑料框架玻璃插入专用机的设计与开发
- 作者：Lokeswar Patnaik;Sunil Kumar
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Special Purpose Machine;
- Assembly;
- CAD;
- CAE;
- High production rate;
14.Social Media Analytics for New Product Development: Case of a Pizza

机译：新产品开发的社交媒体分析：披萨的情况
- 作者：Ashish Kumar Rathore;P. Vigneswara Ilavarasan
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Social Media;
- New Product Development;
- Use-Generated Content;
- Data Mining and Analysis Techniques;
15.Steering Strategy for a multi-axle wheeled vehicle

机译：多轴轮式车辆的转向策略
- 作者：VV Jagirdar;VP Maskar;MW Trikande
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Strategy;
- multi-axle;
- IWS;
16.Hydrodynamics and simulation studies of liquid-liquid slug flow in micro-capillaries

机译：微毛细管液 - 液体块流动的流体动力学与仿真研究
- 作者：Wasim Khan;Abhishek K Chandra;Kaushal Kishor;Sadhana Sachan;M. Siraj Alam
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Slug flow;
- Volume of fluid;
- computational fluid dynamics;
- Microchannel;
17.Forced Vibration Response of a Micro-cantilever Beam with Moving Loads

机译：具有移动载荷的微悬臂梁的强制振动响应
- 作者：Pratik Khandagale;V Kartik;Suhas Joshi
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- MEMS;
- time and space varying loads;
- step-up micro-cantilever;
18.Effect of odd-even vehicular restrictions on ambient noise levels in Delhi city

机译：奇数甚至车辆限制对德里市环境噪声水平的影响
- 作者：N. Garg;A. K. Sinha;M. Dahiya;P. Kumar
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- National Ambient Noise Monitoring Network (NANMN);
- Day equivalent level;
- L_(day);
- Night equivalent level;
- L_(night);
19.Multi-objective optimization of the multi-floor facility layout problem

机译：多层设施布局问题的多目标优化
- 作者：Zahnupriya Kalita;Dilip Datta
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Multi-objective;
- multi-floor;
- MFLP;
20.Formation of machine-part cells using assignment allocation algorithm

机译：使用赋值分配算法形成机器部件单元
- 作者：Soumyabrata Bhattacharjee;Manash Hazarika
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Cellular manufacturing;
- exceptional elements;
- void elements;
- machine-part cell formation;
- assignment allocation algorithm;
21.Design of solar parabolic trough collector

机译：太阳能抛物线槽收集器设计
- 作者：Alka Bharti;Bireswar Paul
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Parabolic trough collector;
- Design;
- Soltrace;
- CREO paraetric 2.0;
22.Finite Element Modeling and Analysis of Implant Scaffolds

机译：植入脚手架的有限元建模与分析
- 作者：Tarun Bhardwaj;Surya Pratap Singh;Mukul Shukla
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Orthopaedic implants;
- FEA;
- Additive manufacturing;
- Porous scaffolds;
23.Experimental Studies on Duplex Turning of Titanium Alloy (Ti-6Al-4V)

机译：钛合金双相转向的实验研究（TI-6AL-4V）
- 作者：Sunil Kumar;Ravindra Nath Yadav;Raghuvir Kumar
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- duplex turning;
- machining;
- cutting;
- surface roughness;
- force;
- titanium;
24.Analysis on Topography and Metallurgical Aspects of EDMed Work Surface of Inconel 718 Obtained Using Triangular Cross Sectioned Copper Tool Electrode

机译：使用三角形横截面铜工具电极获得的Inconel 718的IDMED工作表面的地形和冶金方面分析
- 作者：Thrinadh Jadam;Chandramani Upadhyay;Saurav Datta;Soumya Gangopadhyay;Siba Sankar Mahapatra
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Electro-Discharge Machining (EDM);
- Inconel 718;
- super alloy;
- Surface Crack Density (SCD);
- grain refinement;
- crystallite size;
- dislocation density;
25.Bi-level Problem as a Plain Multi-Objective Optimization Problem: A Preliminary Study

机译：双层问题作为普通多目标优化问题：初步研究
- 作者：Pooja Dutta;Dilip Datta
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Bi-level;
- Multi-Objective;
- hierarchy-based;
26.Operational cost minimization in heat exchanger network under milk fouling

机译：牛奶污垢下热交换器网络的运行成本最小化
- 作者：Dimbalita Deka;Dilip Datta
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Operational;
- heat exchangernetwork;
- milk fouling;
27.Biodiesel Production from Waste Cooking Oil Using Ultrasonic Cavitation its Characteristics

机译：使用超声波空穴的废物烹饪油生产生物柴油和其特点
- 作者：Naveen Kumar Gupta;Pushpendra Singh Rathore;Shailendra Sinha
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Biodiesel;
- Waste cooking oil;
- Ultrasonic cavitation;
28.Application of Simulated Annealing for the Optimization of Process Parameters in WEDM Process for Machining 201LN Stainless Steel

机译：模拟退火应用在WEDM加工过程中工艺参数优化的应用 - 加工201ln不锈钢
- 作者：Sourav Ghosh;Prosun Mandal;Subhas Chandra Mondal
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Simulated Annealing;
- Stainless Steel;
- 201LN;
- WEDM;
- Taguchi L2 7 DOE;
29.Comparative analysis of Conical and Conventional Active Magnetic Bearings for complete support of a 5-dof rotor system

机译：锥形和常规主动磁轴承的比较分析，用于完全支撑5-DOF转子系统
- 作者：Arvind Katyayn;Praveen Kumar Agarwal
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Active magnetic bearing;
- Conical AMB;
- 5-dof rotor system;
30.Application of FMOMILP for Aggregate Production Planning: A case of multi-product and multi-period production model

机译：FMOMILP在骨料生产规划中的应用：一种多产品和多时期生产模型的情况
- 作者：Yash Chauhan;Vishant Aggarwal;Pravin Kumar
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Aggregate Production Planning;
- Supply Chain;
- Fuzzy Sets;
- Multi-objective mixed integer linear programming;
31.Comparative study of structural error in four bar mechanism for hyperbolic functions

机译：双曲函数四个条机制结构误差的比较研究
- 作者：Ankur Jaiswal;H. P. Jawale
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Function Generation;
- Synthesis;
- Optimization;
- Non-linear equations;
- Accuracy point;
32.Performance of parallel connected Compressed Air Energy Storage for proper utilization of Wind Energy

机译：平行连接压缩空气能量存储的性能，以适当利用风能
- 作者：Siddhivinayak Rampurkar;K. S. Sandhu;Rajesh Kumar
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Wind Energy;
- Compressed Air Energy Storage (CAES);
- Wind Fluctuations;
- Rated power of wind turbine;
33.Manufacturing experiences of large stroke welded disc bellows for nuclear applications

机译：用于核应用的大型行程焊接盘管的制造经验
- 作者：S. C. S. P. Kumar Krovvidi;B. K. Sreedhar;N. Mahendran;G. Padmakumar;S. Raghupathy;R. Gopalakrishnan
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Prototype Fast Breeder Reactor;
- welded disc bellows;
- AM350;
- Helium leak testing of bellows;
- heat treatment;
34.Development of STEP-NC for Intelligent Machining

机译：智能加工的Step-NC的开发
- 作者：Deepanshu Srivastava;Venkateswara Rao Komma
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- STEP-NC;
- AP238;
- CAD/CAM;
- JSDAI?;
35.Isogeometric Analysis of Reynolds Equation for Hydrodynamic Lubrication

机译：流体动力润滑雷诺方程的异步分析
- 作者：Subrata Kumar Mondal;Hari K. Voruganti;Syed Ismail
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Isogeometric analysis;
- Hydrodynamic lubrication;
- Reynolds equation;
- Finite thrust pad bearing;
36.Assisting an architect with alternative automated space layout designs using order crossover Genetic Algorithm in AutoCAD

机译：使用AutoCAD中的订单交叉遗传算法帮助建筑师使用替代自动化空间布局设计
- 作者：Arun Kumar;Kamlesh Dutta;Anmol Gupta;Sahil Badyal;Devesh Rohan
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Genetic Algorithms;
- Architecture;
- Floor Plan;
- Sub-Spaces;
- Stochastic Universal Sampling;
- Autolisp;
- AutoCAD;
37.Modelling of Agile Manufacturing Barriers in the Indian Engineering Industries: An Interpretive Structural Modeling Approach

机译：印度工程产业敏捷制造障碍的建模：一种解释性结构建模方法
- 作者：Bhupendra Prakash Sharma;Akshat Jain;Harshit Ahuja
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
38.Combustion and Performance Characteristics of a Diesel Engine Using Emulsified Diesel Prepared By Ultrasonicator

机译：超声波晶化柴油柴油发动机的燃烧和性能特征
- 作者：Pijush Kanti Mondal;Bijan Kumar Mondal
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- water emulsified diesel;
- ultrasonicator;
- combustion;
- performance;
- greener fuel;
39.Effect of Nozzle angle on Mach number of Afterburner in Jet aircraft

机译：喷嘴角度对喷射飞机后果机马赫数的影响
- 作者：Gurrala Srinivasa Rao;A Shaija
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- afterbuner;
- liner;
- diffuser;
- V-gutter and nozzle angle;
40.Evaluation of Hardness and Wear Resistance of Nitride Layer on Ti-6Al-4V Titanium Alloy by Tungsten Inert Gas (TIG) Melting Process

机译：钨惰性气体（TIG）熔化过程评价氮化物层对氮化物层对Ti-6Al-4V钛合金的耐磨性
- 作者：Chirag Panwariya;Shivani Gupta
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- TIG Melting;
- Hardness;
- Wear Resistance;
- XRD and SEM analysis;
41.Linear Stability Analysis of Hydrodynamic Journal Bearings Operating under Turbulent Micropolar Lubrication

机译：湍流微柱润滑下运行流体动力学轴承的线性稳定性分析
- 作者：Subrata Das;Sisir Kumar Guha
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- hydrodynamic lubrication;
- journal bearing;
- micropolar fluid;
- stability;
- turbulence;
42.Performance and Emission Improvement Analysis of CI Engine Using Various Additive Based Diesel Fuel

机译：基于各种添加剂柴油燃料的CI发动机的性能和排放改进分析
- 作者：Jitendra N. Gangwar;Samir Saraswati;Shivam Agarwal
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Diesel engines;
- additives;
- brake thermal efficiency;
- performance and emissions;
43.Effect of alumina nanoparticles on shear strength of epoxy adhesive: Experimental and finite element analysis

机译：氧化铝纳米粒子对环氧粘合剂剪切强度的影响：实验性和有限元分析
- 作者：Sunil Kumar Gupta;Dharmendra Kumar Shukla;Anurag Bharti
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- epoxy;
- alumina nanoparticles;
- finite element modelling;
- nanocomposites adhesive;
- single lap joints;
44.Effect of Cutting Parameter and Cutting Environment on Surface Integrity during Machining of Nimonic C-263a Ni based superalloy

机译：切割参数和切削环境对尼芯C-263A Ni高温合金加工过程完整性的影响
- 作者：Mahendra Singh;S. Gangopadhyay
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Nimonic C-263;
- MQL;
- PVD multilayer coating;
- residual stress;
- surface damages;
- white layer;
45.Effect of temperature on Rough EHL in Slider Bearing

机译：温度对滑块轴承粗糙EHL的影响
- 作者：Rahul Kumar;Mohammad Sikandar Azam;Subrata Kumar Ghosh
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Elastic deformation;
- Thin film lubrication;
- Deterministic surface roughness;
- Sawtooth roughness profile;
- Temperature;
46.Evolutionary Bi-Objective Optimization of Soil Cutting by Bull-Dozer: A Real-World Application

机译：斗牛解放器的进化双客观优化：真实世界的应用
- 作者：Nada Barakat;Deepak Sharma
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Bi-objective optimization;
- Post-optimal analysis;
- Soil Cutting and Pushing process;
- Soil-tool Interaction;
47.Stochastic Vibration Analysis of Skew Functionally Graded Plates Using Higher Order Shear Deformation Theory

机译：高阶剪切变形理论的偏斜功能分级板随机振动分析
- 作者：Sanjay Singh Tomar;Mohammad Talha
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Functionally graded materials;
- third order shear deformation theory;
- skew plates;
- Vibration;
- Coefficient of variance;
48.Analyzing the relationship between the deterioration of engine oil in terms of change in viscosity, conductivity and transmittance

机译：在粘度，电导率和透射率变化方面分析了发动机油劣化之间的关系
- 作者：Harish Shinde;Anand Bewoor
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Engine oil;
- Viscosity;
- Oil color;
- Regression equation;
- Conductivity;
- Transmittance;
49.Controlled shock response spectrum test on spacecraft subsystem using electrodynamic shaker

机译：使用电动振动器对航天器子系统的受控冲击响应频谱测试
- 作者：Madheswaran M;Prashant A R;Ramakrishnan S;Ramesh Naidu V;Govindan P;Aravindakshan P
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
50.Temperature Monitoring System with Remote Calibration Capability

机译：具有远程校准能力的温度监控系统
- 作者：Abhishek Singh Shakya;Velpuru Sri Kashyap
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Cold junction compensation;
- calibration;
- Peltier heater;
- ZigBee module;
51.Cam Profile Analysis and Simulation Using Synthetic Curves

机译：使用合成曲线的凸轮轮廓分析和仿真
- 作者：Swarn Prakash;Sunil Kumar Srivastava
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- cam profile;
- Hermite curve;
- Bèzier curve;
- simulation;
- kinematic analysis;
- synthetic curve;
52.Order Reduction of Interval Systems Using Direct Truncation and Stability Equation Method

机译：使用直截截断和稳定性方程方法进行间隔系统的顺序减少
- 作者：Chhabindra Nath Singh;Deepak Kumar;Paulson Samuel
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Direct truncation;
- Interval system;
- Integral square error;
- Model reduction;
- Stability equation;
53.Automotive Product Development Lifecycle Optimization Through Value Engineering And Value Analysis (VAVE) Techniques

机译：汽车产品开发生命周期优化通过价值工程和价值分析（VAVE）技术
- 作者：Vinay Kumar Singh;M K Arya;Rahul Kumar
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- VE;
- VA;
- Cost containment;
- profit margin;
- product cost;
- SWOT analyses;
- Product Function etc;
54.Experimental Investigation of Plasma Sprayed HA (Hydroxyapatite)/Al_2O_3/Fe_2O_3 composites coated metallic implants

机译：等离子体喷涂HA（羟基磷灰石）/ AL_2O_3 / FE_2O_3复合材料涂层金属植入物的实验研究
- 作者：Shubham Bansal;Vinay Pratap Singh
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- component;
- formatting;
- style;
- styling;
- insert;
55.Optimization of parameters affecting the performance of wind turbine blade using grey relational analysis

机译：利用灰色关系分析，优化影响风力涡轮机叶片性能的参数
- 作者：Aman Khurana;Tushar Sharma;K. K. Shukla
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Wind Turbine Blade;
- Optimization;
- Grey relational analysis;
56.Exact Solutions of Shock Waves in non-ideal gas with magnetic field and Radiation flux under the influence of Gravitational Field

机译：引力场影响下的非理想气体与辐射通量的磁场冲击波的精确解
- 作者：G. Nath;Mrityunjoy Dutta;R. P. Pathak
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Similarity Solution;
- Gravitating medium;
- Shock waves;
- Magnetogasdynamies;
- Non-ideal gas;
- Radiation heat flux;
57.Design, Modeling and development of a Go-Kart Vehicle

机译：Go-Kart车辆的设计，建模和开发
- 作者：Joe Johnson;Dinesh Kumar K;Sai Praneeth;Yathiraj;Ravi Shankar
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- Chasis Design;
- Steering Design;
- Innovation;
- Obstacle detection;
58.Analyzing the impact of CSR practices in enhancing the supply chain performance: A case study of tyre industry

机译：CSR实践对加强供应链绩效的影响 - 以轮胎产业为例
- 作者：null
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- corporate social responsibility;
- tyre industry;
- supply chain;
- DEMATEL;
59.Evaluating key factors of sustainable manufacturing in Indian automobile industries using Analytic Hierarchy Process (AHP)

机译：使用分析层次处理评估印度汽车产业可持续制造的关键因素（AHP）
- 作者：Om Ji Shukla;Gunjan Soni;Vishnu Jangid;Rajesh Kumar;Man Mohan Siddh
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
60.A comparative investigation of annular fins of different profiles using multi-objective genetic algorithm

机译：多目标遗传算法不同谱环形翅片的对比研究
- 作者：Abhijit Deka;Dilip Datta
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- investigation;
- annular fins;
- multi-objective;
61.CFD Analysis of Turbulent Mixing Characteristics of Passive Scalar Inside a Micro Gas Combustor

机译：微燃气燃烧器中无源标量的湍流混合特性的CFD分析
- 作者：Abhishek Shrivastava;Vivek Kumar Patel
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- micro gas combnstor(MGC);
- turbulence mixing;
- multiple jet flow;
- passive scalar;
62.Mechanical Behavior of A356 Matrix Nanocomposites Fabricated Using Two Step Mixing Via Stir Casting Technique

机译：用搅拌技术用两步混合制造的A356基质纳米复合材料的力学行为
- 作者：Md. Tanwir Alam;Akhter Husain Ansari
- 会议名称：《International Conference on Advances in Mechanical, Industrial, Automation and Management Systems》 | 2017年
- MMCs;
- ball milling;
- stir casting;
- compressive strength;
- forgeability;
- morphology;