首页>外文会议>其他>Conference on Computational Technologies in Engineering

Conference on Computational Technologies in Engineering

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Laboratory Tests vs. FE Analysis of Concrete Cylinders Subjected to Compression

机译：对压缩进行混凝土汽缸的实验室测试与FE分析
- 作者：?ukasz Polus;Maciej Szumiga?a
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Analysis;
- Concrete Cylinders Subjected;
- Compression;
2.Design and Execution of Building Investments Using BIM Technology for Facilities Subject to The Polish Military Administration

机译：使用BIM技术进行建筑投资的设计和执行，以便拥有波兰军事管理的设施
- 作者：Maciej Wójtowicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Design;
- Execution;
- Building Investments;
3.The Modular Test Stand for Fatigue Testing of Aeronautical Structures - Design Phase

机译：用于航空结构的疲劳测试模块化试验 - 设计阶段
- 作者：Andrzej Leski;Micha? Szmidt;Wojciech Wronicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Fatigue Testing;
- Aeronautical;
- essential assumptions;
4.Using the Simulation Technique To Improve Efficiency in General Aviation

机译：利用仿真技术提高一般航空效率
- 作者：Marta Galant;Mateusz Nowak;Monika Kardach;Marta Maciejewska;Anna ??gowik
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Efficiency;
- General Aviation;
- CAT;
5.Development of Test Device for Springback Study in Sheet Metal Bending Operation

机译：钣金弯曲操作中回弹研究测试装置的开发
- 作者：Piotr K?dzierski;Arkadiusz Pop?awski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Development;
- Test Device;
- Springback;
6.A Method for Experimental Identification of Bending Resistance of Reinforced Rubber Belts

机译：一种钢筋胶带弯曲性实验识别方法
- 作者：Jakub Cho?odowski;Piotr Dudziński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Experimental Identification;
- Bending Resistance;
- Reinforced;
7.The Use of the WITNESS Simulator for Improving Flows in a Complex Production System

机译：目击模拟器在复杂生产系统中改进流动的使用
- 作者：Edward Michlowicz;Katarzyna Smolińska
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- WITNESS Simulator;
- Improving Flows;
- Complex Production;
8.Investigation of Armoured Personnel Carrier Crew Subjected to Impact Load

机译：对撞击载荷的装甲人员船员调查
- 作者：Zdzis?aw Hryciów;Grzegorz S?awiński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Investigation;
- Armoured Personnel;
- APC;
9.Stochastic Dominance Application for Optimal Transport Company Selection

机译：最佳运输公司选择的随机优势申请
- 作者：Józef ?urek;Jaros?aw Zió?kowski;Joanna Szkutnik-Rogoz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Dominance Application;
- Optimal Transport;
- compared carriers;
10.Application of the Multipoint Meshless FDM to Chosen Demanding Problems

机译：多点网格FDM的应用选择苛刻的问题
- 作者：Irena Jaworska
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Application;
- Multipoint Meshless FDM;
- Chosen Demanding;
11.LENS Ti-6Al-4V Alloy Material Properties Determination for LS-Dyna Package

机译：LS-DYNA包装镜头TI-6AL-4V合金材料特性测定
- 作者：Pawe? Baranowski;Jerzy Ma?achowski;Pawe? P?atek;Aleksandra Szafrańska
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- determining;
- material properties;
- honeycomb structure;
12.Neural Networks Based Method For Automatic Classification Of GPR Data

机译：基于神经网络的GPR数据自动分类方法
- 作者：Magdalena Szymczyk;Piotr Szymczyk
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Automatic Classification;
- GPR Data;
- geologic structures;
13.Numerical Optimization of the System Supplying the Cooling and Lubricating Fluid to the Cutting Zone

机译：向切割区提供冷却和润滑液的系统的数值优化
- 作者：Krzysztof Krupanek;Jacek Sawicki;Wojciech Stachurski;Mateusz Przybysz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Optimization;
- System Supplying;
- Cooling;
14.Numerical Geometry Based Optimization Used to Solve Design Problems of On-Board Mechanical Systems of the PW-100 Aircraft

机译：基于数值的基于几何优化，用于解决PW-100飞机车载机械系统设计问题
- 作者：Wojciech Grendysa
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Problems;
- On-Board Mechanical;
- satisfied;
15.Numerical Modelling of Temperature Gradient in Layered Structure of Textiles for Firemen Clothing

机译：用于消防员纺织品分层结构温度梯度的数值模型
- 作者：Danuta Miedzińska
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Modelling;
- Temperature Gradient;
- Layered;
16.Analysis of Lateral Torsional Buckling and Dimensioning for I-Sections, C-Sections and Z-Sections Purlins

机译：I型切段，C段和Z-切片尿素横向扭转屈曲和尺寸分析
- 作者：S?awomir Stachura
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Lateral Torsional Buckling;
- Dimensioning;
- shell elements;
17.Theoretical Fundamentals for Formulation of Discrete Equations of Motion in Thermodynamic Approach for Description of Metal Forming Processes

机译：用于描述金属成形过程的热力学方法的离散运动方法的理论基础
- 作者：Leon Kukielka;Lukasz Bohdal;Jaroslaw Chodor;Pawel Kaldunski;Krzysztof Kukielka;Agnieszka Kulakowska;Radoslaw Patyk
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Theoretical Fundamentals;
- Formulation;
- Discrete Equations;
18.Numerical Modeling of Freezing and Thawing Process of Packed Food Product

机译：包装食品冻融工艺的数值模型
- 作者：Gra?yna Ka?u?a
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Modeling;
- Freezing;
- Thawing Process;
19.New Solutions for the Problem of Design of Thin-Walled Torsion-Loaded Structures with use of the SADSF Method

机译：使用SADSF方法设计薄壁扭转结构设计的新解决方案
- 作者：Ireneusz Markiewicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Solutions;
- Problem;
- Design;
20.Experimental and Metallographic Analysis of the Energy-Absorbing Shield Subjected to the EFP Impact

机译：对EFP撞击影响的能量吸收屏蔽的实验和金相分析
- 作者：Adam Kurzawa;Dariusz Pyka;Krzysztof Jamroziak;Miroslaw Bocian;Janusz Sliwinski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Experimental;
- Metallographic Analysis;
- Energy-Absorbing;
21.Concept of a Gun Barrel Based on the Layer Composite Reinforced with Continuous Filament

机译：基于连续灯丝加强层复合材料的枪杆的概念
- 作者：Dariusz Pyka;Miroslaw Bocian;Krzysztof Jamroziak;Mariusz Kosobudzki;Maciej Kulisiewicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Based;
- Layer Composite Reinforced;
- Continuous;
22.Influence of biomass fly-ash and asphalt emulsion on properties of cement composites - a statistical study

机译：生物质粉煤灰和沥青乳液对水泥复合材料性能的影响 - 统计研究
- 作者：Jakub Pop?awski;Ma?gorzata Lelusz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- emulsion;
- properties;
- cement composites;
23.Approach to Simulations of Goods Deliveries with the Use of Cargo Bicycles

机译：用货物自行车仿真仿真的方法
- 作者：Vitalii Naumov;Jakub Starczewski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Approach;
- Simulations;
- Goods Deliveries;
24.Numerical Evaluation of Applicability and Accuracy of Gurney Equations for Use in Fixed Size Setups

机译：固定尺寸设置中使用的Gurney方程的适用性和准确性的数值评估
- 作者：Robert Panowicz;Micha? Trypolin
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Evaluation;
- Applicability;
- Accuracy;
25.The Analysis of Sensitivity to Eccentric Load of Compressed Thin-Walled Laminate Columns

机译：压缩薄壁层压柱偏心载荷敏感性分析
- 作者：Pawel Wysmulski;Hubert Debski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Analysis;
- Sensitivity;
- Eccentric;
26.Utility of Boundary Element Method for Modelling Heat Flow in Floor Heating Systems

机译：地板加热系统中热流建模边界元法的效用
- 作者：Anna Justyna Werner-Juszczuk
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Element Method;
- Modelling;
- surface temperature;
27.Impact of Contact Surface Model in Screw Joints on the Clamping Force Value

机译：螺杆接头螺钉接头的影响夹紧力值
- 作者：Sáawomir Duda;Damian G?siorek;Jacek Gnilka;Slawomir Kciuk;Tomasz Machoczek
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Joints;
- Clamping Force Value;
- such mapping;
28.Topological Optimization of Machine Elements with Numerical Methods in Advanced FEM Systems

机译：具有先进FEM系统中数值方法的机器元件的拓扑优化
- 作者：Leon Kukielka;Lukasz Bohdal;Jaros?aw Chodor;Pawel Kaldunski;Krzysztof Kukielka;Agnieszka Kulakowska;Rados?aw Patyk;Krzysztof Lipiński;Grzegorz Szaliński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Topological Optimization;
- Machine Elements;
- Numerical;
29.Approximate Bifurcation Load of Short Thin-Walled Laminate Plate Structures with Imperfection

机译：具有缺陷的短薄壁层压板结构的近似分叉载荷
- 作者：Andrzej Teter;Zbigniew Kolakowski;Wojciech Smagowski;Hubert Debski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Approximate Bifurcation Load;
- Short Thin-Walled;
- bifurcation load;
30.Numerical research of the high-speed military vehicle track

机译：高速军车轨道的数值研究
- 作者：Zdzis?aw Hryciów;Piotr Rybak
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical research;
- high-speed military;
- determined;
31.Accuracy Study of Stress Intensity Factor Solutions Obtained by Commercial FE Software

机译：商业FE软件获得应力强度因子解决方案的准确性研究
- 作者：Micha? Kucewicz;Andrzej Leski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Accuracy Study;
- Stress Intensity;
- achieved;
32.Protection Capabilities of the Ankle Joint Against the Consequences of Impact Load

机译：踝关节对抗载荷后果的保护能力
- 作者：Tomasz Klekiel;Piotr Malesa;Grzegorz S?awiński;Romuald B?dziński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Protection Capabilities;
- Ankle Joint Against;
- Consequences;
33.Numerical Investigation of Dynamic Loads of Vehicle Hull During Firing

机译：射击过程中车辆船体动态负荷的数值研究
- 作者：Andrzej Wi?niewski;Zdzis?aw Hryciów;Piotr Rybak
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Investigation;
- Dynamic Loads;
- Vehicle;
34.Modelling of Guillotining Process of Grain Oriented Silicon Steel Using FEM

机译：用FEM使用FEM的晶粒定向硅钢的引伸过程的建模
- 作者：Lukasz Bohdal;Leon Kukielka;Andrii M. Radchenko;Radoslaw Patyk;Marcin Ku?akowski;Jaroslaw Chodór
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Modelling;
- Guillotining Process;
- Grain Oriented;
35.Estimation of Wind Pressure Acting on The New Palm House in Gdansk

机译：格但斯克新棕榈宫风压估算
- 作者：Jacek Chró?cielewski;Miko?aj Mi?kiewicz;Bartosz Sobczyk;Krzysztof Wilde
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Estimation;
- Wind Pressure Acting;
- described;
36.Selected Aspects of Numerical Modeling of the Short Span Thin-Walled Beams

机译：短跨度薄壁梁的数值模拟的选定方面
- 作者：Robert Studziński;Katarzyna Ciesielczyk
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Selected Aspects;
- Numerical Modeling;
- initial geometrical;
37.Numerical Analysis of Helical Auxetic Yarn Elastomeric Core Tension

机译：螺旋扶手纱弹性芯张力的数值分析
- 作者：Micha? Kwietniewski;Danuta Miedzińska
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Analysis;
- Helical Auxetic;
- experimental tests;
38.The Impact of Forming Processes on Road Barrier Strength

机译：形成过程对道路屏障强度的影响
- 作者：Pawe? Dziewulski;Sebastian Stanis?awek
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Forming Processes;
- Road Barrier;
- numerical;
39.Boundary Element Analysis of Cracks Under Compression

机译：压缩下裂缝的边界元分析
- 作者：Piotr Fedelinski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Element Analysis;
- Cracks Under Compression;
- BEM;
40.Testing the Influence of the Stiffness of Structure Elements of a Military Vehicle on the Safety of the Crew

机译：测试军用车辆结构元素刚度对船员安全的影响
- 作者：Grzegorz S?awiński;Piotr Malesa;Marek ?wierczewski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Influence;
- Stiffness;
- Structure Elements;
41.Numerical and Experimental Analysis of the Distribution of Strains and Stresses During the Adherence Test of the Protective Coating Using the Pull-Off Method

机译：用拔下法测定保护涂层粘附试验期间菌株和应力分布的数值和实验分析
- 作者：Grzegorz Gembalczyk;Slawomir Duda;Kinga Czernecka;Katarzyna Krawiec
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical;
- Experimental Analysis;
- Distribution;
42.Analysis of Exhaust Gas Flow Through a Particulate Filter in the Exhaust of the Spark Ignition Direct Injection Engine

机译：通过颗粒过滤器在火花点火直喷式发动机排气中通过微粒过滤器分析
- 作者：Pawe? Fu?;Piotr Lijewski;Barbara Sokolnicka;Maciej Siedlecki;Natalia Szymlet
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Analysis;
- Exhaust Gas Flow Through;
- Particulate;
43.Risk of Injury in Lumbar Spine During Explosion of Low-Mass Charge under Vehicle

机译：在车辆低质量充电爆炸过程中腰椎损伤风险
- 作者：Tomasz Klekiel;Grzegorz S?awiński;Marek ?wierczewski;Pawe? Bogusz;Romuald B?dziński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- During Explosion;
- Low-Mass Charge;
- boundary conditions;
44.Modeling of Mechanical Behavior of Double-Phase Precipitates in 2024 Aluminum Alloy

机译：2024铝合金双相沉淀力的力学性能建模
- 作者：Anna Staszczyk;Jacek Sawicki;Mariusz Stegliński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Modeling;
- Mechanical Behavior;
- Double-Phase;
45.Optimal Shaping of the Composite Bridge Girder by Means of Optimal Control

机译：通过最优控制实现复合桥梁梁的最佳成形
- 作者：Dorota Jasinska;Leszek Mikulski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Optimal Shaping;
- Composite Bridge;
- integral;
46.Jaw Biomechanics: Estimation of Activity of Muscles Acting at the Temporomandibular Joint

机译：下颌生物力学：估算在颞下颌关节的肌肉活动
- 作者：Wiktoria Wojnicz;Izabela Lubowiecka;Agnieszka Tomaszewska;Katarzyna Szepietowska;Pawel Bielski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Estimation;
- Muscles Acting;
- Temporomandibular Joint;
47.Thermal Modeling and Simulation of High Power LED Module

机译：高功率LED模块的热建模和仿真
- 作者：Krzysztof Baran;Marcin Le?ko;Henryk Wachta;Antoni Ró?owicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Thermal Modeling;
- Simulation;
- High Power;
48.Effect of Additional Outer Protective Structure Application on Reduction of Floor Plate Deformation Resulting from Detonation of Explosive Material Under Vehicle

机译：额外的外保护结构应用在车辆下爆炸材料爆炸导致墙板变形减少的影响
- 作者：Marek ?wierczewski;Grzegorz S?awiński;Piotr Malesa
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Resulting;
- Detonation;
- Explosive Material;
49.Development of a Model and Numerical Simulations of a Single Bucket Tracked Excavator

机译：开发单桶跟踪挖掘机的模型和数值模拟
- 作者：Andrzej Kosiara;Piotr Tetlak
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Development;
- Model;
- Numerical Simulations;
50.Integration of Robotic Arm and Vision System with Processing Software using TCP/IP Protocol in Industrial Sorting Application

机译：在工业分类应用中使用TCP / IP协议的加工软件与处理软件的集成
- 作者：Piotr Prusaczyk;Wojciech Kaczmarek;Jaros?aw Panasiuk;Khadir Besseghieur
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Integration;
- Robotic Arm;
- Vision System;
51.Comparison of SPH and FEM in Thermomechanical Coupled Problems

机译：SPH和FEM在热机械耦合问题中的比较
- 作者：Krzysztof Damaziak;Jerzy Malachowski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- SPH;
- FEM;
- lining interaction;
52.Modelling and Experimental Analysis of Shear-Slitting Process of Light Metal Alloys Using FEM, SPH and Vision-Based Methods

机译：用FEM，SPH和视觉方法使用微金属合金剪切切割过程的建模与实验分析
- 作者：Lukasz Bohdal;Leon Kukielka;S?awomir ?wi??o;Andrii M. Radchenko;Agnieszka Ku?akowska
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Modelling;
- Experimental Analysis;
- Shear-Slitting;
53.Sensitivity Analysis of Numerical Model of CFRP Mechanical Joint

机译：CFRP机械接头数值模型的敏感性分析
- 作者：Krzysztof Pucha?a;El?bieta Szymczyk;Jerzy Jachimowicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Sensitivity Analysis;
- Numerical Model;
- CFRP Mechanical;
54.Simulation of Three-Point Bending of a Simple Composite Beam Using the Commercial FEM Software

机译：商业有限元软件模拟简单复合梁的三点弯曲
- 作者：Andrzej Dylewski;Waldemar ?ogin
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Simulation;
- Three-Point Bending;
- Simple Composite;
55.Different BIM Levels During the Design and Construction Stages on the Example of Public Utility Facilities

机译：在公用事业设施的示例下设计和施工阶段的不同BIM水平
- 作者：Rafa? Zieliński;Maciej Wójtowicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Construction Stages;
- Example;
- Public Utility;
56.Method of determining the locomotive engine specific fuel consumption based on its operating conditions

机译：基于其操作条件确定机车发动机特定燃料消耗的方法
- 作者：Lukasz Rymaniak;Pawel Daszkiewicz;Jerzy Merkisz;Yaroslav V. Bolzhelarskyi
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- determining;
- locomotive engine;
- developed;
57.Numerical Analysis of the Influence of Surface Modification on the Bond Strength Between a Single Incisal Tooth with a Removable Partial Denture Metal Framework

机译：用可拆卸部分义齿金属框架对表面改性对单根切牙粘合强度影响的数值分析
- 作者：Joanna Tacza?a;Krzysztof Krupanek;Jacek Sawicki
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- removable;
- deformations appeared;
- incisal;
58.Numerical research of selected features of the non-pneumatic tire

机译：非充气轮胎所选特征的数值研究
- 作者：Marcin ?muda;Jerzy Jackowski;Zdzis?aw Hryciów
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical research;
- selected features;
- NPT;
59.About Numerical Analysis of Pin Loaded Joints in Laminate Structure

机译：关于层压结构中销装载接头的数值分析
- 作者：El?bieta Szymczyk;Krzysztof Pucha?a;Jerzy Jachimowicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Analysis;
- Pin Loaded Joints;
- Laminate;
60.Modeling of Abrasive Water Suspension Jet Cutting Process Using Response Surface Method

机译：响应面法的磨料水悬浮射流切割工艺建模
- 作者：Andrzej Perec;Aleksandra Radomska-Zalas
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Modeling;
- Abrasive Water Suspension;
- achieved;
61.Analysis of the construction of TEG thermoelectric generator using CFD tools

机译：CFD工具分析TEG热电发电机的结构
- 作者：Andrzej Zió?kowski;Pawe? Fu?;Micha? Dobrzyński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Analysis;
- construction;
- TEG thermoelectric;
62.Investigation on Deformation Process of Cellular Structures with Gradient Topology Manufactured Additively

机译：梯度拓扑结构沉重地制造的细胞结构变形过程研究
- 作者：Pawe? P?atek;Pawe? Baranowski;Kamil Cieplak;Marcin Sarzyński;Judyta Sienkiewicz;Jacek Janiszewski;Jerzy Ma?achowski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Investigation;
- Deformation Process;
- Cellular Structures;
63.Three-Point Bending of Seven Layer Beams

机译：七层梁的三点弯曲
- 作者：Krzysztof Magnucki;Dawid Witkowski;Piotr K?dzia
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Bending;
- Seven Layer Beams;
- presented;
64.Thermal Expansion Coefficient Influence on FML Material Deformation Under Thermal Load

机译：热膨胀系数对FML材料变形的热膨胀系数影响
- 作者：Jacek Podra?ka;Pawe? Bogusz;Wies?aw Barnat
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Coefficient Influence;
- FML Material Deformation;
- distribution occurring;
65.Preface: Computational Technologies in Engineering (TKI'2018)

机译：前言：工程中的计算技术（TKI'2018）
- 作者：null
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Technologies;
- Engineering;
- computational applications;
66.Forced Convection Heat Transfer in Square Duct with Heated and Adiabatic Walls at Constant Axial Heat Flux

机译：具有恒定轴向热通量的加热和绝热壁的方形管道中的强制对流传热
- 作者：Miroslaw Zukowski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Transfer;
- Square Duct;
- Heated;
67.Numerical Calculation of the Flow Through a Three-Way Coal Dust Separator

机译：三通煤尘分离器流量的数值计算
- 作者：Grzegorz Borsuk;Boles?aw Dobrowolski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Calculation;
- Flow Through;
- Three-Way;
68.Modeling of Human Head Injuries in an Armored Vehicle

机译：装甲车人体损伤的建模
- 作者：Micha? Burkacki;Wojciech Wolański;S?awomir Suchoń;Bo?ena Gzik-Zroska;Kamil Joszko;Marek Gzik
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Modeling;
- Human Head Injuries;
- Armored Vehicle;
69.Numerical Calculations of Limestone Calcination in Cement Industry with use of Shrink Core Model

机译：使用收缩核心模型水泥工业石灰石煅烧数值计算
- 作者：Jacek Wydrych;Boles?aw Dobrowolski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Calculations;
- Limestone Calcination;
- Cement;
70.Numerical Study of an IED Blast Protection System

机译：IED爆炸保护系统的数值研究
- 作者：Sebastian Stanis?awek;Grzegorz S?awiński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Study;
- IED Blast Protection;
- LOTR;
71.Shaping the Incident Impulse in the Modified Split Hopkinson Pressure Bar Method

机译：在改进的分裂Hopkinson压力条方法中塑造入射脉冲
- 作者：Robert Panowicz;Micha? Trypolin
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Shaping;
- Incident Impulse;
- Modified;
72.The meaning of qualitative reflective features of the facade in the design of illumination of architectural objects

机译：建筑物体照明设计中立面定性反射特征的含义
- 作者：Henryk Wachta;Krzysztof Baran;Marcin Le?ko
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- meaning;
- qualitative reflective features;
- facade;
73.Examining Influence of a Rooftop Cargo Carrier Position on Automobile Aerodynamics

机译：检查屋顶货物承运人位置对汽车空气动力学的影响
- 作者：Rados?aw Miko?aj Janicki;Adam Piechna
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Examining Influence;
- Rooftop Cargo Carrier Position;
- Automobile;
74.Study of the Distribution of Bolt Forces in a Multi-Bolted System Under Operational Normal Loads

机译：在运行正常载荷下多螺栓系统中螺栓力分布的研究
- 作者：Rafa? Grzejda
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Distribution;
- Bolt Forces;
- calculations;
75.Numerical Investigation of Flow Stabilization in a Channel with Rapid Change of Flow Direction

机译：流动方向快速变化的通道中流动稳定的数值研究
- 作者：?ukasz Cie?likiewicz;Micha? Wasik;Piotr ?apka;Micha? Kubi?
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Investigation;
- Flow Stabilization;
- Channel;
76.Modification of the Shape of Thermal Insulation of a Twin-Pipe Pre-Insulated Network

机译：修改双管预绝缘网络隔热的形状
- 作者：Tomasz Janusz Teleszewski;Miroslaw Zukowski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Modification;
- Shape;
- Thermal Insulation;
77.Analysis of Driving Simulation Capabilities Car Vehicle on the Engine Brake Stand

机译：发动机制动架上驾驶仿真功能的驾驶仿真功能分析
- 作者：Micha? Dobrzyński;Piotr Lijewski;Andrzej Zió?kowski;Pawe? Daszkiewicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Analysis;
- Driving Simulation;
- create progressive;
78.Initial Credibility Analysis of a Numerical Model of Heat and Moisture Transfer in Porous Building Materials

机译：多孔建筑材料热水转移数值模型的初始可信度分析
- 作者：Micha? Wasik;?ukasz Cie?likiewicz;Piotr ?apka;Piotr Furmański;Micha? Kubi?;Miros?aw Seredyński;Karol Pietrak;Tomasz S. Wi?niewski;Maciej Jaworski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Credibility Analysis;
- Numerical Model;
- Moisture;
79.On the Possibility of Laser Pulse Characterization Based on Displacements and Temperatures at the Back Surface of the Target Body

机译：基于目标体后表面的位移和温度的激光脉冲表征的可能性
- 作者：Karol Pietrak;Piotr ?apka;Ma?gorzata Kujawińska
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Possibility;
- Laser Pulse Characterization Based;
- Displacements;
80.Modeling and Simulation of Movement of Dispersed Group of Mobile Robots Using Simscape Multibody Software

机译：SIMSCASE综合软件分散组移动机器人运动的建模与仿真
- 作者：Micha? Siwek;Leszek Baranowski;Jaros?aw Panasiuk;Wojciech Kaczmarek
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Simulation;
- Movement;
- Dispersed;
81.Numerical Research of the Cassette Bridge Joint Strength with Mapping of Stand for Experimental Tests

机译：试验试验台型盒式磁带桥联合强度的数值研究
- 作者：Wieslaw Krason;Arkadiusz Pop?awski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- prototype floating cassette;
- subject;
- research presented;
82.Model Based Enterprise (MBE) in Prototype Compressor Project for New Turboprop Engine

机译：新型涡轮螺旋发动机原型压缩机项目的基于模型的企业（MBE）
- 作者：Piotr Paruszewski;Piotr Lis;?ukasz Lipiński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- MBE;
- MBD;
- PMI;
- 3D model;
83.System for Improving Directional Stability for Articulated Vehicles

机译：用于提高铰接式车辆的方向稳定性的系统
- 作者：Piotr Dudziński;Aleksander Skurjat
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- System;
- Improving Directional Stability;
- Articulated;
84.Generalized Vehicle Durability Index for Different Traffic Conditions

机译：不同交通条件的广义车辆耐久性指数
- 作者：Mariusz Kosobudzki;Tadeusz Smolnicki
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Durability Index;
- Different Traffic Conditions;
- selected example;
85.Technology of Real-World Analyzers (TAUR)

机译：现实世界分析仪（Taur）技术
- 作者：Jaros?aw Jung;Krzysztof Ha?agan;Piotr Polanowski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Technology;
- Real-World Analyzers;
- TAUR;
86.FE Analysis of Steel-Timber Composite Beams

机译：钢木材复合梁的FE分析
- 作者：Marcin Chybiński;?ukasz Polus;Wojciech Szwabiński;Patryk Niewiem
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- PE;
- parameters;
- materials;
87.Research on Thermal Resistance Rth_(j-c) of High Power Semiconductor Light Sources

机译：高功率半导体光源的热阻Rth_（J-C）研究
- 作者：Krzysztof Baran;Henryk Wachta;Marcin Le?ko;Antoni Ró?owicz
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- resistance research;
- selected;
- Mentor Graphics;
88.Influence of 3D Scanner Parameters On Accuracy Evaluation of Vehicle Element Deformation

机译：3D扫描仪参数对车辆元素变形精度评估的影响
- 作者：Miros?aw Karczewski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Evaluation;
- Vehicle Element Deformation;
- results depends;
89.Numerical and Experimental Tests of Suspension Elements

机译：悬浮元件的数值和实验试验
- 作者：Boguslaw Michalowski;Piotr Rybak;Jozef Wysocki
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical;
- Experimental Tests;
- Suspension;
90.Progressive Failure Analysis of Thin-Walled Composite Structure with Open Cross-Section

机译：开放式横截面薄壁复合结构的渐进式故障分析
- 作者：Patryk Rozylo;Hubert Debski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Failure Analysis;
- Thin-Walled;
- prepared FEM model;
91.Electric cars as a new mobility concept complying with sustainable development principles

机译：电动汽车作为符合可持续发展原则的新移动概念
- 作者：Ewelina Sendek-Matysiak
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- complying;
- sustainable development principles;
- increase;
92.Numerical Analysis of Momentum Transfer in the Case of Blast Protection Structures

机译：爆破保护结构的动量转移数值分析
- 作者：Andrzej Morka;Piotr K?dzierski;Grzegorz S?awiński
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Analysis;
- Momentum Transfer;
- Case;
93.Numerical Modeling of Random Packed Beds of Various Packing Densities with a Sequential Deposition Algorithm

机译：顺序沉积算法的各种包装密度随机包装床的数值模拟
- 作者：Maciej Marek
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical Modeling;
- Random Packed Beds;
- Various Packing;
94.Simulation of Laminar Flow by the Boundary Element Method in Straight Rod Bundles in Ducts

机译：用管道直线束中边界元法的层流仿真
- 作者：Tomasz Janusz Teleszewski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Simulation;
- Boundary;
- also presented;
95.The Use of Computer Techniques During Construction of Unmanned Ground Vehicle

机译：无人机地面车辆施工中计算机技术的使用
- 作者：Filip Polak
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Construction;
- Unmanned Ground Vehicle;
- software;
96.FEM Analysis of the Plastic Deformation of the Regular Arched Asperities in the Two-Stage Cold Metal Forming Processes

机译：对两阶段冷金属成形工艺常规拱形粗糙度塑性变形的FEM分析
- 作者：Leon Kukielka;Lukasz Bohdal;Jaroslaw Chodor;Katarzyna Gotowala;Pawel Kaldunski;Krzysztof Kukielka;Agnieszka Kulakowska;Radoslaw Patyk;Michal Szczesniak
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- FEM Analysis;
- Plastic Deformation;
- Regular;
97.The Work of a Compressed, Composite Plate in Asymmetrical Arrangement of Layers

机译：层间布置压缩复合板的作品
- 作者：Katarzyna Falkowicz;Hubert Debski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Composite Plate;
- Asymmetrical Arrangement;
- Layers;
98.Numerical analysis of the work of a PUR Cellasto material buffer

机译：Pur Cellasto材料缓冲液工作的数值分析
- 作者：?ukasz Go??biewski;Piotr ?ach;Jaros?aw Mańkowski
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Numerical analysis;
- PUR Cellasto;
- simulated;
99.Optimization of PVT Geometry in Application of Ground Heat Source Regeneration

机译：接地热源再生应用PVT几何的优化
- 作者：Micha? Wasik;Marcin A. Bugaj;Krzysztof Mik;Maciej Klein;Tomasz S. Wi?niewski;Patryk Chaja
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- Optimization;
- PVT Geometry;
- Application;
100.Numerical Studies on Influence of Friction Coefficient in Multi-Leaf Spring on Suspension Basic Characteristics

机译：多叶弹簧摩擦系数对悬浮碱性特征影响的数值研究
- 作者：Wieslaw Krason;Zdzislaw Hryciow;Jozef Wysocki
- 会议名称：《Conference on Computational Technologies in Engineering》 | 2019年
- results;
- numerical analyses;
- LS-DYNA system;