首页>外文会议>其他>International Scientific Conference on New Materials and Technologies in Mechanical Engineering

International Scientific Conference on New Materials and Technologies in Mechanical Engineering

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Effect of the Mechanical Alloying and Spark Plasma Sintering on Microstructure, Phase Composition and Chemical Elements Distribution of Nb-Si Based Composite

机译：机械合金化和火花等离子体烧结对Nb-Si基复合材料的微观结构，相组合物和化学元素分布的影响
- 作者：Goncharov I.S.;Razumov N.G.;Shamshurin A.l.
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Nb-Si;
- in-situ composites;
- mechanical alloying;
- spark plasma sintering.;
2.Investigation of the Pastes for Multilayer Ceramic Capacitors Termination

机译：用于多层陶瓷电容器终止浆料的研究
- 作者：A.V. Dmitrieva;P.S. Gordiev;I.Ya. Gallai
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- MLCC;
- termination;
- electrode paste;
3.The Research and Development of the Technology for Pressure Treatment of the Thermally Expanded Graphite Powders

机译：热膨胀石墨粉末压力处理技术的研究与开发
- 作者：S.A. Kotov;S.-V.R. Muzafarova;M.G. Livintsova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- thermally expanded graphite;
- rolling;
- compactability;
- density;
- porosity;
- multilayer strips;
- powder materials;
- composite materials;
- technology efficiency.;
4.Investigation and Characterization of New Polyimide Powder for Selective Laser Sintering

机译：新型聚酰亚胺粉末选择性激光烧结的研究及表征
- 作者：Gleb Vaganov;Andrey Didenko;Elena Ivankova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- polyimide;
- additive technology;
- polymer selective laser sintering;
- properties of polymer particles;
- mechanical properties.;
5.Obtaining Spherical Powders of Grade 5 Alloy for Application in Selective Laser Melting Technology

机译：以选择性激光熔化技术应用5级合金球形粉末
- 作者：N.E. Ozerskoi;Wang Qingsheng
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- additive technology;
- plasmachemical synthesis;
- spheroidization;
- titanium alloy;
- grade 5.;
6.Bi-Activated Glasses and their Potential Covering Spectral Region as Active Media for Tunable Near Infrared Lasers

机译：双激活眼镜及其潜在的覆盖光谱区域作为可调谐近红外激光器的活性介质
- 作者：Fedorov Yurii;Aseev Vladimir;Tuzova luliia
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
7.Design of Special Device for the Forced Electrolytic-Plasma Polishing of Internal Surfaces by Counter Flows

机译：柜台流动强制电解质 - 抗压电解抛光特殊装置的设计
- 作者：L.A.Ushomirskaya;Yuri Mikhailovich Baron;Ivan Sergeevich Kuzmichev
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- electrolyte;
- plasma;
- forced-flow;
- processing;
- internal;
- surface;
- roughness;
- uniformity;
- counter flows;
- special device;
- electrode-cathode;
- thermal balance;
- boiling;
- plasma cover.;
8.Influence of Se on Properties of As-S-Se-I Glass for Immersion Mid-IR Leds Lenses

机译：SE对浸没中IR LED镜头的AS-SE-I-I玻璃性能的影响
- 作者：Margarita Dronova;Artem Osipov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- chalcogenide glass;
- density;
- coefficient of thermal expansion;
- solubility;
- mechanical characteristics;
- Raman spectra.;
9.Agricultural By-Products as Advanced Raw Materials for Obtaining Modifiers and Fillers for Epoxy Materials

机译：农业副产品作为先进的原料，用于获得环氧材料的改性剂和填料
- 作者：Elena Gotlib;Ha Phuong Thi Nya;Nguyen Thi Lan Anh
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- epoxy materials;
- epoxidized rubber seed oil;
- synthetic wollastonite;
- rice husk;
- limestone;
- abrasion hardness;
- scratch hardness;
- frictional coefficient;
10.Studies of Tribological and Corrosion Properties of Coatings Based on Iron for Light Alloy Drill Pipes of Aluminium Alloys

机译：基于铁的铝合金铁合金钻管的涂层涂层腐蚀性能研究
- 作者：Boris Aleksandrovich Shemyakinskiy;Margarita Aleksandrovna Skotnikova;Zixi Wang
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- friction;
- wear;
- coating;
- drilling;
- tribotechnical stand;
- light alloy drill pipe;
- corrosion;
- electrochemistry;
- aluminum alloys;
11.The Method for Determining the Friction Coefficient in Relation to the Hot Forging Processes

机译：与热锻造过程相关的摩擦系数的方法
- 作者：Alexander Khaimovich;Yaroslav Erisov;Sergei Surudin
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- friction coefficient;
- hot forging;
- die impression filling;
- radial channels.;
12.Current Design Rules for Welding of Wind Energy Structures for Arctic Conditions

机译：北极条件焊接风能结构的当前设计规则
- 作者：Lopaev Sergey;Layus Pavel;Kah Paul
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
13.Tribotechnical Diagnostics of an Internal Combustion Engine According to the Condition of the Oil

机译：根据油状况的内燃机的Trestechnical诊断
- 作者：llnur Salavatovich Syundyukov;Eugene Konstantinovich lvanov;Margarita Alexandrovna Skotnikova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Diagnosing;
- oil;
- wear;
- engines;
- chromatogram;
- viscosity;
- wear resistance;
- wear rate.;
14.Obtaining a Hard Alloy Powder from a Worn-Out Tools with a Subsequent Use for Pressing Rods

机译：从磨损的工具中获得硬合金粉末，随后用于压杆
- 作者：Sergei Anatolevich Kotov;Bogdan Valerevich Avramishin;Evgenii Michalovich Fedorov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- powder metallurgy;
- hard alloy;
- tungsten carbide;
- recycling;
- electro-erosion dispersion;
- carbide tools;
- pressing;
- composite materials;
- powder materials.;
15.An Analytical Model for Filler Wire Heating and Melting During Wire Feed Laser Deposition

机译：焊丝加热和丝网激光沉积期间熔化的分析模型
- 作者：Mukin D.V;lvanovS.Y;Valdaytseva E.A
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Laser deposition;
- Temperature field;
- Green's function;
- Filler wire;
- Heat source.;
16.Improving the Properties of Aluminum Alloy System Al-Cu-Mg, Subjected to Hardening and Severe Plastic Deformation

机译：改善铝合金系统Al-Cu-Mg的性能，经受硬化和严重塑性变形
- 作者：Olga Paitova;Elena Bobruk;Margarita Skotnikova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- bulk nanomaterials;
- ultrafine-grained materials;
- severe plastic deformation;
- mechanical properties;
- fractographic analysis;
17.Effect of Process Parameters on Microstructure and Mechanical Properties of Direct Laser Deposited Cold-Resistant Steel 09CrNi2MoCu for Arctic Application

机译：工艺参数对直接激光沉积耐寒钢09crni2mocu的微观结构和力学性能的影响
- 作者：Ruslan Mendagaliyev;Sergey Yuryevich lvanov;Svetlana Georgievna Petrova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- direct laser deposition;
- Cold resistant steel;
- Arctic structures;
- Additive technology;
- High strength steel;
- Thermal cycle;
- Microstructure;
- Hardness.;
18.Designing of Topology Optimized Parts for Additive Manufacturing

机译：添加剂制造的拓扑优化零件的设计
- 作者：Aleksei Orlov;Dmitriy Masaylo;Igor Polozov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
19.Application Development for the Evaluation of Penetration in Laser and Laser-Arc Hybrid Welding of Tee and Corner Joints

机译：激光激光激光和弧形混合焊接评估的应用开发，T恤和角接头
- 作者：llya Nikolaevich Udin;Artem Alexandrovich Voropaev;Anna Unt
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Laser welding;
- laser-arc hybrid welding;
- T-joint welding;
- Corner joint welding;
- software.;
20.Corrosion-Resistant Ceramic Coatings that are Promising for Use in Liquid Metal Environments

机译：耐腐蚀的陶瓷涂层，其具有用于液态金属环境的耐用性
- 作者：M.A. Markov;A.D. Kashtanov;A.V. Krasikov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Microarc oxidation;
- cold gas-dynamic spraying;
- ceramics;
- lead;
- corrosion;
- coatings;
- nuclear industry;
- aluminum;
- aluminum oxide;
- liquid metal;
21.The Use of the TMA as Stabilizing Reagent for the Li-O System Obtained by Atomic Layer Deposition

机译：用原子层沉积获得的LI-O系统的使用作为稳定试剂
- 作者：Denis Nazarov;llya Ezhov;llya Mitrofanov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- lithium oxide;
- alumina;
- thin films;
- atomic layer deposition;
22.Si Nanopowder Based Anode Material for the Lithium Ion Battery Cell

机译：基于锂离子电池电池的Si纳米粉末阳极材料
- 作者：Aleksandr Morozov;Alexander Semencha;Alexander Freidin
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- lithium ion battery;
- silicon based anode;
- chemical reaction front;
- chemical affinity tensor;
- linear viscoelasticity.;
23.Formulas for the Calculation of Temperatures and Concentrations of Carbon Responsible to the Parar Equilibrium of the Main Phases in Medium Sheet Steels

机译：用于计算碳钢中主要阶段的公共阶段的温度和碳浓度的公式
- 作者：Pavel Zhitelev;Darya Serzhenko
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- steel;
- austenite;
- ferrite;
- cementite;
- phase para-equilibrium;
- carbon concentration.;
24.Investigation of Composite Materials Impact Damage by a Computer Tomography

机译：计算机断层扫描的复合材料损坏的调查
- 作者：Oleg Bezzametnov;Mitryaykin V.l.;Khaliulin V.l
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Composite materials;
- computed tomography;
- defect;
- non-destructive testing;
- ultrasonic pulse echo control;
- impact damage;
- impact resistance.;
25.Synthesis of the In Situ Nb-Si Composites by Binder Jetting Additive Manufacturing Technology

机译：粘合剂喷射添加剂制造技术合成原位NB-Si复合材料
- 作者：I.S. Goncharov;L.V. Hisamova;L.Yu. Saubanova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Additive manufacturing;
- Binder Jetting;
- In-situ composites;
- Nb-Si.;
26.Microstructure and Mechanical Properties of Powder Steel 16Cr - 2Ni -Mn - Mo Obtained by Mechanical Alloying and Spark Plasma Sintering

机译：机械合金化和火花等离子烧结获得的粉末钢16Cr - 2ni -mn - Mo的微观结构和力学性能
- 作者：MakhmutovT.Y;Razumov N.G;Shamshurin A.l.
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- mechanical alloying;
- spark plasma sintering;
- stainless steel;
- microstructure;
- mechanical properties.;
27.Strain and Friction Effect on the Stress-Strain State in the Deformation Zone During Cold Rolling of Thin Beryllium and Aluminum Foils

机译：薄铍和铝箔冷轧过程中变形区应力 - 应变状态的应变和摩擦效应
- 作者：Vasiliy Mishin;Ivan Shishov;Vladimir Paromov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Cold Rolling;
- Beryllium Foil;
- Deformation Zone;
- Finite Element Method.;
28.Investigation of the Hammer Forging Process of Large-Sized Turbine Blades of Stainless Steel

机译：不锈钢大型涡轮叶片锤锻工艺的研究
- 作者：Maksim Olegovich Smirnov;Tatiana Alexandrovna Chizhik;Alexandr Maksimovich Zolotov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- turbine blade;
- mathematical simulation;
- stamping;
- plastic deformation;
- stamping hammer;
- steam-air hammer;
29.Synthesis and Study of Nanocrystalline Mg_2SiO_4 Powder and Yttrium Aluminum Garnet

机译：纳米晶Mg_2SiO_4粉末和钇铝石榴石的合成与研究
- 作者：Alexander Semencha;Elena Bochagina;Margarita Dronova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- adsorbents;
- porosity;
- magnesium silicate;
30.Friction and Wear Characteristics of UD Thermoplastic Tape Based Nanocomposites with Fullerene Soot

机译：用富勒烯烟灰的UD热塑性带基纳米复合材料的摩擦磨损特性
- 作者：llya Kobykhno;Dmytro Honcharenko;Li Hongyu
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- thermoplastic composite;
- UD tape;
- friction;
- wear;
- nanocomposite;
- fullerene soot;
- mechanical properties;
31.Structural Features and the Effect of Two Alkalis in Chalcogenide and Phosphate Glasses

机译：两种碱在硫属化物和磷玻璃中两种碱的结构特征和效果
- 作者：Viktor Markov;Ivan Sokolov;Alexey Povolotskiy
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- glass;
- ionic conduction;
- mixed alkali effect;
- conductivity;
- MAE;
- chalcogenide glass;
32.Method of Testing Rolled Tubular Products for Oilfield Pipes for Corrosion-Abrasive Wear

机译：用于腐蚀磨损的油田管轧制管状产品的方法
- 作者：Boris Aleksandrovich Shemyakinskiy;Aleksey Aleksandrovich Alkhimenko;Sergey Mikhaylovich Tikhonov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- erosion;
- corrosion;
- oil field tubular goods;
- wearing;
- abrasive;
33.The End-to-End Simulation of Semi-Continuous Casting and Subsequent Hot Rolling with Account of Microstructure

机译：微观结构陈述半连铸和随后热轧的端到端模拟
- 作者：Yaroslav Erisov;Sergei Surudin;Igor Bobrovskij
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Computer simulation;
- semi-continuous casting;
- rolling;
- microstructure.;
34.The Obtaining Layered Composite Materials that Contain Rare Earth Element

机译：获得含有稀土元素的层状复合材料
- 作者：A. N. Burlova;F.Y. lsupov;S.A. Kotov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
35.Wood - Polymer Composites Assessment Using Microtomography

机译：木材 - 聚合物复合材料使用微微映图进行评估
- 作者：lldar Musin;llnur Fayzullin;Svetoslav Volfson
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- wood-polymer composite (WPC);
- polypropylene;
- polyethylene;
- polyvinyl chloride;
- wood flour;
- physical and mechanical properties;
- microtomography.;
36.Influence of Contact Friction on the Kinematics of Metal Flow During Equal Channel Angular Pressing

机译：相等通道角压期间金属流动运动学对摩擦对金属流动的影响
- 作者：Ruslan Aleksandrovich Parshikov;Alexander Maksimovich Zolotov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
37.The Effect of Laser Power on the Microstructure of the Nb-Si Based In-Situ Composite, Fabricated by Laser Metal Deposition

机译：激光功率对基于原位复合材料的微观结构的影响，通过激光金属沉积制造
- 作者：Ivan Goncharov;Dmitriy Masaylo;Aleksei Orlov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Direct energy deposition;
- Nb-Si based alloy;
- Additive manufacturing;
38.Phosphorus Removal Options at Induction Melting of Steel

机译：钢诱导熔炼中的磷去除选项
- 作者：Valentin Petrovich Karasev;Sergey Vladimirovich Ryaboshuk;Pavel Valef evich Kovalev
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- steel dephosphorization;
- induction melting;
- scale;
- iron ore;
- catastrophic oxidation;
39.Correlation of Nonuniformities of the Seebeck Coefficient's Distribution and the Strain-Stress State in Extruded Thermoelectric Material

机译：塞贝克系数的分布不均匀性与挤出热电材料中应变应力状态的相关性
- 作者：Arsenii Aleksandrovich RULIMOV;Daria Dmitrievna KUZAVKOVA;Sergey Aleksandrovich NEMOV
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- thermoelectric material;
- hot extrusion;
- Seebeck coefficient;
- nonuniformity;
- mathematical modeling;
- strain-stress state;
40.Modification of Nitrogen-Containing High-Chromium Steels by Nanosized Lanthanum Hexaboride

机译：纳米镧六硼化镧的含氮高铬钢的改性
- 作者：Eduard Ylevich Kolpishon;Ludmila Vladimirovna Razumova;Sergey Vladimirovich Ryaboshuk
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- nanosized lanthanum hexaboride;
- modification;
- high-chromium steel;
- austenitic steel;
- martensitic steel;
41.Electronic Structure and Ionic Transport in Phosphate Glass with Pyrophosphate Structural Elements

机译：具有焦磷酸盐结构元素的磷酸盐玻璃中的电子结构和离子输送
- 作者：Andrey Petrov;Ivan Sokolov;Viktor Markov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- glass;
- electronic structure;
- density of states;
42.Study of Crystallization Kinetics of Amorphous Zirconia in Fe_2O_3 Matrix by Kissinger Method

机译：基辛格法研究Fe_2O_3矩阵中无定形氧化锆的结晶动力学
- 作者：Elizaveta Bobrynina;Roman Starykh;Svetlana Ginzburg
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- activation energy;
- crystallization;
- zirconia;
- differential thermal analysis.;
43.X-Ray CT Investigation of Graded Ti-Ti64 Material Produced by Selective Laser Melting

机译：选择性激光熔化产生渐变Ti-Ti64材料的X射线CT研究
- 作者：Vadim Sufiiarov;Artem Kantyukov;Igor Polozov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- additive manufacturing;
- selective laser melting;
- titanium alloy;
- x-ray computed tomography.;
44.Registration of an ICP Plasma CV Dependences under Various Pressures in the Plasma-Chemical Deep Etching System

机译：在等离子体化学深度蚀刻系统中的各种压力下的ICP等离子体CV依赖性注册
- 作者：Gleb lankevich
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- plasma-chemical deep etching;
- Langmuir probe;
- Plasma CV dependences;
45.Application of Innovational Sc-Containing Alloys in Shipbuilding

机译：含创新的SC合金在造船中的应用
- 作者：Maria Gogolukhina;Leyla Mamedova;Olga Scholtz
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
46.Effect of Severe Plastic Deformation on the Structure and Properties of the Aluminum Alloy System Al-Cu-Mg

机译：严重塑性变形对铝合金系统Al-Cu-Mg结构和性能的影响
- 作者：Olga Paitova;Elena Bobruk;Svetlana Shasherina
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- bulk nanomaterials;
- ultrafine-grained materials;
- severe plastic deformation;
47.Effect of Processing and Radiation Exposure on the Structure and Properties of Polypropylene

机译：加工和辐射暴露对聚丙烯结构与性质的影响
- 作者：M.S. Lisanevich;R.Yu. Galimzyanova;E.P. Rakhmatullina
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- polypropylene;
- radiation resistance;
- ionizing radiation;
- oxidation induction time;
- melt flow index;
- thermogravimetric analysis;
48.Determination of Boundary Parameters of Pipelines Elbows Blanking Elements Made from Titanium Alloy Ti-4AI-2Mn and steel AISI 304

机译：管线边界参数的弯曲螺旋弯曲元件制成的钛合金Ti-4ai-2mn和钢AISI 304
- 作者：Konstantin Nikolenko;Kirill Nikolenko;Sergey Zvonov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Steeply curved elbow;
- computer model;
- ANSYS / LS-DYNA;
- corrugation;
- criterion of destruction;
- stress;
- strain;
- thickness;
- experimental studies.;
49.General Experimental Method of Research of Anisotropy of Conductive Materials

机译：导电材料各向异性研究的一般实验方法
- 作者：Gennady Konstantinovich Baryshev;Aleksandr Aleksandrovich Barzov;Aleksandr Pavlovich Biryukov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Anisotropy;
- conductive materials;
- electrophysical properties.;
50.Manufacture of a High-Pressure Centrifugal Fan Made of 316L by the Method of High-Speed Direct Laser Deposition

机译：通过高速直接激光沉积方法制造由316L制成的高压离心式风扇
- 作者：Topalov I.K;Golovin P.A;Lanin A.A
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Laser;
- laser metal deposition;
- additive technology;
- defects.;
51.Research of Regularities of Aerosol Synthesis of Iron Oxide Particles

机译：氧化铁颗粒气溶胶合成规律研究
- 作者：Evgeniya Nikolaevna Chapalda;Sergey Evgenyevich Aleksandrov;Ewelina Kucal
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- iron oxides;
- pyrolysis of aerosols;
- IR spectra;
- powder;
- XRD;
52.Comparison of Supermacroporous Polyester Matrices Fabricated by Thermally Induced Phase Separation and 3D Printing Techniques

机译：热诱导相分离和3D印刷技术制备的超乘以聚酯基质的比较
- 作者：Mariia Stepanova;Aleksei Eremin;Ilia Averianov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
53.Research of the Causes of the Defect 'Sliver' on the Inner Surface of the Steel Pipe Strength Category X70

机译：缺陷“粘土”在钢管强度类内表面的原因研究X70
- 作者：Pavel Valefevich Kovalev;Sergey Vladimirovich Ryaboshuk;Andrey Igorevich Zhitenev
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
54.Online: 2019-09-24Effect of Selective Laser Melting Process Parameters and Heat Treatment on Microstructure and Properties of Titanium Alloys Produced from Elemental Powders

机译：在线：2019-09-24选择性激光熔化过程参数和热处理对元素粉体产生的钛合金微观结构和性能的影响
- 作者：Igor Polozov;Evgenii Borisov;Vera Popovich
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- additive manufacturing;
- powder bed fusion;
- titanium alloy;
- in-situ synthesis;
- elemental powders;
55.Improvement of Technology of Formation of Coatings with Metal Effect by Modified Water-Dispersion Paints

机译：改进水分散涂料改进涂层涂层形成技术
- 作者：Sokolova Victoria Alexandrovna;Markov Viktor Alexandrovich;Rzhavtsev Andrey Arkadyevich
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Acrylic latex;
- Waterborne paint material;
- Technology of protective-decorative coating;
- Finishing;
- Film formation.;
56.Manifestation of Concentration Quenching of Fluoroaluminate Glasses Doped with Erbium

机译：掺铒掺杂氟铝玻璃的浓度猝灭的表现
- 作者：Victor Klinkov;Alexander Semencha;Evgenia Tsimerman
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- doped glass;
- luminescence spectrum;
- absolute quantum yield of luminescence;
- decay curves;
- fluoroaluminate glass.;
57.Homogenization of Cr-Ni Austenitic Steel Studying: Liquation and Microhardness Heterogeneity Equalization

机译：CR-NI奥氏体钢研究的均质化：液相和微硬度异质性均等化
- 作者：Anton Tsvetkov;Irina Teplukhina
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- reactor;
- stainless steel;
- thermal processing;
- homogenization;
- liquation;
- microhardness;
58.Manufacturing and Properties of Radiation Resistance Aluminum Alloys and Composites with Addition of Gadolinium

机译：加入钆抗辐射铝合金和复合材料的制造与性能
- 作者：Gennadij Aleksandrovich Kosnikov;Aleksandr Viktorovich Kalmykov;Eduard Nikolaevich Bespalov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Al-Gd alloys;
- composites;
- powder metallurgy;
- foundry technologies;
- alloying;
- disperse particles;
- vibration-jet agitator (VJA);
- structure;
- neutron-absorbing properties.;
59.Vibroacoustic Study of Abrasive Wear of Multilayered Sliding Bearings

机译：多层滑动轴承磨料磨损的纵向研究
- 作者：Andrey Vladimirovich Tikalov;Leonid Vladimirovich Yefremov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- abrasive cloth;
- vibrometer;
- wear;
- wear intensity;
- well hole;
- frictional machine;
- sliding bearing.;
60.Technological Aspects of Obtaining Functional Coatings Based on Silver by the Method of Cold Gas-Dynamic Spraying

机译：通过冷气动力喷涂方法基于银获得官能涂层的技术方面
- 作者：Bykova A.D.;Farmakovsky B.V.;Markov M.A.
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Silver;
- alloy;
- functional coatings;
- cold gas-dynamic spraying;
- disintegrator treatment;
- corrosion resistance;
- erosion resistance;
- hardness;
- electrical resistance;
61.Calculating the Nominal Values of the Matching Device Installation of Plasma Chemical Etching

机译：计算等离子体化学蚀刻匹配装置安装的标称值
- 作者：Endiiarova E.V.;Ruby Singh
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- RF plasma;
- matching device;
- plasma chemical etching;
- discharge impedance.;
62.Research of Mechanical Properties of Cold Resistant Steel 09CrNi2MoCu after Direct Laser Deposition

机译：直激光沉积后冷耐钢09crni2mocu力学性能研究
- 作者：Yana Alexandrovna Bistrova;Elena Anatolievna Shirokina;Ruslan Mendagaliev
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Cold resistant steel;
- tensile test;
- impact toughness;
- additive technology;
- direct laser deposition.;
63.Effect of Inter-Layer Dwell Time on Distortion and Residual Stresses of Laser Metal Deposited Wall

机译：层间停留时间对激光金属沉积壁变形和残余应力的影响
- 作者：Sergei Ivanov;ArturVildanov;Pavel Golovin
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Laser metal deposition;
- Distortion;
- Residual stresses;
- Temperature field;
- Simulation.;
64.Filtration Permeability of Dendritic Structure in Condition of Diffusion-Capillary Coalescence of Secondary Side Branches

机译：二次侧分支扩散毛细血管结合条件下的树突结构的过滤渗透性
- 作者：Artem Eduardovich Kim;Ludmila Jurievna Dobosh;Valeri Mikhailovich Golod
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
65.Phase and Structural Transformations in Heat Resistant Alloys during Direct Laser Deposition

机译：直接激光沉积期间耐热合金的相位和结构变换
- 作者：Nadine Buczak;Thomas Hassel;Nikita Gennadevich Kislov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Direct laser fabrication;
- direct laser deposition;
- nickel based alloys;
- heat resistant alloys;
- X-Ray analysis;
- cracking;
- heat treatment;
66.Temperature Influence on Microstructure and Properties Evolution of Friction Stir Welded Al-Mg-Si Alloy

机译：摩擦搅拌焊接Al-Mg-Si合金微观结构和性能演化的温度影响
- 作者：Anton Naumov;luliia Morozova;Fedor lsupov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Friction stir welding;
- Al-Mg-Si alloy;
- Finite element analysis;
- Physical simulation;
- Microstructure evolution;
- Microhardness.;
67.Aerosol-Assisted Chemical Deposition of Nanocomposite Material in the 'Iron-Carbon-Oxygen' System

机译：“铁 - 碳 - 氧”系统中纳米复合材料的气溶胶辅助化学沉积
- 作者：Irina Tyurikova;Sergey Alexandrov;Kirill Tyurikov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- AACVD;
- carbon;
- iron;
- oxygen;
- nanocomposite.;
68.Modeling of the Formation Process of the Coherent Intermetallides in Nickel Alloys During Laser Treatment

机译：激光处理期间镍合金相干金属间化合物形成过程的建模
- 作者：Andrey Alekseev;Ekaterina Valdaytseva;Vladimir Aleksandrov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- laser cladding;
- new phase inclusion growth;
- powder GS6U;
- Ni_3AI intermetallide;
- reaction rate constant.;
69.Formation of Nanostructure and Tool Wear During Cutting Treatment of Titanium Alloy

机译：钛合金切割处理期间形成纳米结构和工具磨损
- 作者：Galina Ivanova;Juozas Padgurskas;Vytenis Jankauskas
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- cutting treatment;
- chip structure;
- nanostructure;
- transmission and scanning electronic microscopy;
- microhardness;
70.Fusible Glass Based on Glassy Chalcogenide Type Systems Ge-S(Se)Br, Ge-S(Se)l

机译：基于玻璃硫属元素化物型系统GE-S（SE）BR，GE-S（SE）L的可熔玻璃
- 作者：Nikolai Krylov;Mikhail Mikhailov;Lev Blinov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
71.Aspect-Independent Siliconglass Etching by Bosch Method

机译：通过博世方法蚀刻宽独立的硅化料
- 作者：Alekseev R.A.;Alieva A.l.;Kucal Ewelina
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Bosch process;
- silicon etching;
- silicon on glass;
- micromechanical gyroscopes;
- encapsulated sensors.;
72.Effects of PTA Deposition Parameters on Coating Quality of 41Cr4, 50CrV4 and 100Cr6 Steel

机译：PTA沉积参数对41Cr4,50Crv4和100Cr6钢涂层质量的影响
- 作者：Pavel Golovin;Maximillian Mildebrath;EvgeniyZemlyakov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Plasma-transferred arc welding;
- Hardfacing;
- Surfacing;
- Coatings;
- Hybrid bevel gears.;
73.Effect of Microstructure and Impact Toughness, on the Character of the Destruction of Main oil and Gas Pipelines

机译：微观结构和冲击韧性的影响，对主油气管道破坏的特征
- 作者：A. Y. Doroshchenkova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- low carbon steel;
- welded joint;
- microstructure;
- metallographic examination;
- impact toughness;
- fracture pattern.;
74.Feasibility Study of Hybrid Laser Arc Welding Application in Shipbuilding

机译：混合激光电弧焊接应用在造船中的可行性研究
- 作者：Maria Gogolukhina;Leyla Mamedova;Olga Scholtz
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- feasibility study;
- hybrid laser arc welding;
- shipbuilding;
- digitalization;
- automated arc welding;
- digital enterprise;
- operational costs;
- efficiency increase;
- payback.;
75.Measurement of Thermal Cycle at Multi-Pass Layer Build-Up with Different Travel Path Strategies during DLMD Process

机译：在DLMD过程中使用不同的旅行路径策略在多通校正下的热循环测量
- 作者：Stanislav Stankevich;Andrey Gumenyuk;Anne Strasse
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- additive technology;
- laser metal deposition;
- thermal cycles;
- stainless steel;
- 316L;
76.Structure Diagnostic of Iron-Based Out-of-Peritectic Alloys During Nonequilibrium Crystallization

机译：非纤维结晶期间铁基外壳合金的结构诊断
- 作者：Dang C.Le;Konstanchin D.Savelyev;Valeriy M.Golod
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
77.Effect of High Energy Ball Milling Washing Process on Properties of Nd_2Fe_(14)B Particles Obtained by Reduction-Diffusion

机译：高能球铣削洗涤过程对减少扩散获得的Nd_2Fe_（14）B颗粒性能的影响
- 作者：Vitalii Galkin;Kamran Haider;Jongbin Ahn
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- calciothermic reduction;
- hard magnetic particles;
- Nd_2Fe_(14)B;
- high-energy ball milling;
- rare earth;
78.Effective Diagnostics of Internal Defects of Diamonds in the Near Infrared Range on the Basis of Immersion Medium Made from Low-Melting Chalcogenide Glass

机译：基于低熔点硫属化物玻璃制成的浸渍介质，近红外范围内钻石内部缺陷的有效诊断
- 作者：Alexander Semencha;Margarita Dronova;Victor Klinkov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- chalcogenide glass;
- density;
- coefficient of thermal expansion;
- solubility;
- mechanical characteristics;
79.Study of the Method of Obtaining Functional interest-Metallic Coatings Based on Ni-Ti Reinforced with WC Nanoparticles

机译：基于WC纳米颗粒加固Ni-Ti获得功能兴趣金属涂层的方法研究
- 作者：Makarov A.M.;Gerashchenkov D.A.;Aleksandrov S.E.
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- titan;
- nickel;
- cold spray;
- microhardness;
- laser beam;
- heat treatment;
80.Comparative Tribological Testing of Diamond-Containing Inserts of Bearings of Main Shaft of Rotary Steerable Systems

机译：旋转可转向系统主轴轴承轴承嵌入式的比较摩擦学摩擦学摩擦学摩
- 作者：Boris Aleksandrovich Shemyakinskiy;Margarita Aleksandrovna Skotnikova;Zixi Wang
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- sliding friction;
- abrasive wear;
- diamond-containing insert;
- hard alloy;
- polycrystalline diamond;
81.Influence of Powder Condition on Surface Properties of Cold-Resistant High-Strength Steel Produced by Direct Laser Deposition Method

机译：粉末条件对直接激光沉积法生产的耐寒高强度钢表面性能
- 作者：Rudolf Korsmik;Ekaterina Alekseeva;Alexander Breki
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
82.Formation of New Glass-Ceramic Materials with Controllable Dielectric and Magnetic Properties

机译：具有可控电介质和磁性性能的新型玻璃陶瓷材料
- 作者：Zoya Geraldovna Tyurnina;Natalya Tyurnina;S.I. Sviridov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
83.Investigation of Aluminum Composite Produced by Laser-Assisted Cold Spray Additive Manufacturing

机译：激光辅助冷藏添加剂制造生产的铝复合材料研究
- 作者：Dmitriy Masaylo;Aleksei Orlov;Sergei lgoshin
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- powder metallurgy;
- additive technologies;
- laser-assisted cold spray;
- gradient materials;
- functional materials;
- microstructure;
84.Research of the Structure Defects at Wire-Feed Laser and Laser-Arc Deposition with AIMg6

机译：用AIMG6馈电激光和激光沉积的结构缺陷研究
- 作者：A.A. Voropaev;A.D. Akhmetov;T. Hassel
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- wire and laser additive manufacturing;
- hybrid laser arc technology;
- MIG torch;
- pulse laser mode;
- CW laser mode.;
85.Finite Element Simulation of Temperature Field During Friction Surfacing of AI-5Mg Consumable Rod

机译：AI-5MG消耗杆摩擦梁温度场有限元模拟
- 作者：Fedor Isupov;Oleg Panchenko;Leonid Zhabrev
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Friction surfacing;
- Consumable rod;
- AI-5Mg alloy;
- Heat source;
- Temperature field;
- Finite element simulation.;
86.Joining of Titanium and its Alloys with Aluminum Alloys by Friction Stir Welding

机译：用摩擦搅拌焊接将钛及其用铝合金的合金加入钛及其合金
- 作者：Radmir Rzaev;Alexander Chularis;Aleksey Rybakov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- friction stir welding;
- solid phase welding;
- superplasticity;
- dissimilar joints;
- hardness;
87.Semiempirical Mathematical Models of Spinning Friction Steel Shkh15 Steel Titles on Steel R6M5, on a Scheme of a Globe Plane Taking into Account Wear

机译：钢R6M5纺纱摩擦钢SHKH15钢标题的半透镜数学模型，以考虑到磨损的地球平面方案
- 作者：Alexey Leonidovich Steshenkov;Sergey Georgievich Chulkin;Alexey Alexandrovich Alkhimenko
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- spinning friction;
- wear;
- ball-plane;
- friction law;
- steel SHKH15;
- steel R6M5.;
88.Comparison of Titanium Powders and Products Manufactured by the Direct Laser Deposition Method

机译：直激光沉积法制造的钛粉末和产品的比较
- 作者：Gushchina M.O;Shalnova S.A.;Gerasimov N.l.
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- additive technologies;
- DLD;
- Direct Laser Deposition;
- titanium alloys;
- Ti-6AI-4V;
- powder metallurgy;
- titanium powders;
89.Investigation of Crystallization Process of a Single Crystal Nickel-Based Alloy during the Laser Multilayer Cladding

机译：激光多层包层中单晶镍基合金结晶过程的研究
- 作者：Rudolf Korsmik;Gleb Turichin;Grigoriy Zadykyan
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
90.Features of Laser Welding Light Constructions from Cryogenic Austenitic Steel 316L

机译：低温奥氏体钢的激光焊接光结构的特点316L
- 作者：Mikhail Kuznetsov;Maxim Larin;Alexander Sorokin
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- laser welding;
- austenitic steel 316L;
- metal with thin thickness;
- light construction;
91.Research of the Treatment Parameters Effects on the Layer Formation during Wire-Feed Laser-TIG Deposition with Aluminum Alloy

机译：用铝合金导线馈电激光沉积过程中的处理参数对层形成的影响
- 作者：V.V. Somonov;L.A. Tsibulskiy;N.G. Kislov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- additive technologies;
- formation of layer;
- laser radiation;
- aluminum wire;
92.Mechanical Properties of Bars Produced by Hot Extrusion of Magnesium Shavings

机译：用镁磨削挤压生产的棒的机械性能
- 作者：Maxim Zamozdra;Julija Karzina;Anna Perminova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- hot extrusion;
- magnesium alloys;
- dispersed hardening;
- magnesium extrusion;
- metallurgy recycling;
- powder metallurgy;
- AZ-80.;
93.Research of the Possibility of Obtaining a Foam System of Aluminum -Carbon Nanotubes Using a High-Temperature Foam Agent

机译：使用高温泡沫剂获得获得铝铝合金泡沫系统的可能性
- 作者：Julija S. Karzina;Maxim Yu. Zamozdra;Maiwand Hootak
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- metal foam;
- aluminum foam;
- carbon nanotubes;
- hardening;
- composite;
- blowing agent;
- foaming process;
- foaming regime development;
- porosity.;
94.Control of Deviations in Lattice Structures Manufactured by Selective Laser Melting

机译：选择性激光熔化制造的晶格结构中的偏差控制
- 作者：Viktoria Sokolova;Artem Kantyukov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Selective Laser Melting;
- Lattice structures;
- Additive manufacturing;
- 3D Scanning;
- Deviation Control;
95.Selective Laser Melting of Nanocomposite Ti-6Al-4V and TiC Powder

机译：纳米复合二-6Al-4V和TIC粉末的选择性激光熔化
- 作者：Evgenii Borisov;Dmitry Masaylo;Popovich Vera
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Selective Laser Melting;
- Powder Metallurgy;
- Titanium Alloy Composite;
- Nanopowder;
- TiC;
96.Evaluation of the Strength of Flat Gears According to the Criterion of the Onset of Plastic Deformation

机译：根据塑性变形发作的标准评估扁平齿轮的强度
- 作者：Anatoly Komarov;Vladimir Zhukov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Spur gears;
- Contact analysis;
- ANSYS;
- AGMA.;
97.Quasi-Optimal Correlation Algorithm for Measuring the Parameters of Surface Microrelief

机译：用于测量表面微观参数的准优选相关算法
- 作者：Aleksey Abramov;Nikolaj Bobrovskij;Nicolay Nosov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- measurement;
- surface;
- microrelief;
- image;
- autocorrelation;
- quasi-optimal;
- algorithms.;
98.Method for Determining Texture Parameters of Processed Precision Surfaces by Correlation

机译：通过相关性确定处理精密表面的纹理参数的方法
- 作者：Aleksey Abramov;Sergej Bobrovskij;Nicolay Nosov
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Texture;
- microrelief;
- precision surface;
- image;
- influence function;
- multiplicative components;
- digital processing;
- convolution;
- autocorrelation;
- identification.;
99.Technological Aspects of Obtaining Functional Gradient Coatings to Protect Machinery from Wear

机译：获取功能梯度涂层的技术方面，以保护机器免受磨损
- 作者：Gerashchenkov D.A;Makarov A.M;Bystrov R.Y
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- functional-gradient coatings;
- adhesion;
- hardness;
- porosity;
- gas-dynamic cold spraying;
- reinforcement;
- nanopowder.;
100.Numerical Simulation of Hot High Strain Rate Torsion Tests for Al-Based Alloys

机译：铝合金热高应变率扭转试验的数值模拟
- 作者：Anton Naumov;Anatolii Borisov;Anastasiya Doroshchenkova
- 会议名称：《International Scientific Conference on New Materials and Technologies in Mechanical Engineering》 | 2019年
- Friction stir welding;
- Al-based alloy;
- Finite element modeling;
- Physical simulation;
- Numerical simulation;