首页>外文会议>其他>Closing Symposium of the German Research Initiative AeroStruct

Closing Symposium of the German Research Initiative AeroStruct

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Development of Flight Control Functions for Integration in Gust Load Simulations

机译：阵风载荷模拟中集成的飞行控制功能的开发
- 作者：Alexander Hamann
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- TU;
- Development;
- Flight Control Functions;
2.Structural Optimization of 3D Wings Under Aerodynamic Loads: Topology and Shell

机译：空气动力载荷下3D翼的结构优化：拓扑与壳
- 作者：Volker Schulz;Roland Stoffel;Heinz Zorn
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- Structural Optimization;
- 3D Wings Under Aerodynamic Loads;
- Topology;
3.Further Development of CAA Simulation for Isolated and Installed Nozzle Configurations

机译：用于隔离和安装喷嘴配置的CAA仿真的进一步发展
- 作者：Andrej Neifeld;Roland Ewert
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- CAA;
- Further Development;
- Isolated;
4.Automated Structural Design of Composite Forward Swept Wings

机译：复合前向扫翅翼的自动结构设计
- 作者：Sascha D?hne;Lars Heinrich
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- Automated Structural Design;
- Composite Forward;
- Swept Wings;
5.Numerical Computations of Isolated and Installed Engine Jet Flows

机译：隔离和安装的引擎喷射流的数值计算
- 作者：Arne Stürmer;Carlos Màrquez-Gutierrez;Peer B?hning
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- TAU;
- DLR;
- Installed Engine Jet Flows;
6.New CFD Practices for Modelling High-Speed Flows

机译：用于建模高速流动的新型CFD实践
- 作者：Jan Willem van der Burg;Matthias Lühmann;H. Jakob;J. Benton
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- CFD;
- Practices;
- Modelling High-Speed Flows;
7.Integrated Process Chain for Aerostructural Wing Optimization and Application to an NLF Forward Swept Composite Wing

机译：用于空气结构翼优化和应用于NLF前向扫掠复合翼的综合工艺链
- 作者：Tobias Wunderlich;Lars Reimer
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- MDO;
- NLF;
- CFRP;
8.Treating Non-conforming Sensitivity Fields by Mortar Mapping and Vertex Morphing for Multi-disciplinary Shape Optimization

机译：用砂浆映射治疗非符合敏感性场和多学科形状优化的顶点形状
- 作者：Altug Emiroglu;Roland Wüchner;Kai-Uwe Bletzinger
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- MDO;
- Treating Non-conforming Sensitivity Fields;
- Mortar Mapping;
9.A Method for the Calculation of Large Deformations in Aeroelastic Applications

机译：气弹性应用中大变形计算方法
- 作者：Markus Ritter
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- A Method;
- Calculation;
- Large Deformations;
10.Design Procedure for Optimum Fiber Composite Airframe Structures Within an Automated Multidisciplinary Design and Optimization Process

机译：自动多学科设计和优化过程中最佳光纤复合机身结构的设计步骤
- 作者：Michael Seibel
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- FEM;
- Design Procedure;
- Optimum Fiber Composite Airframe Structures Within;
11.Interfacing MSC Nastran to the CFD-Solver DLR-Tau for Unsteady FSI Analyses with Nonlinear Aircraft Structures

机译：将MSC Nastran接口到CFD-Solver DLR-TAU，用于使用非线性飞机结构进行非稳定的FSI分析
- 作者：Matthias C. Haupt;Klemens Lindhorst;Peter Horst
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- FSI;
- MSC;
- CFD-Solver;
12.Application of Adjoint Based Optimization on a MALE Platform

机译：兼容基于兼容对雄性平台的应用
- 作者：Kolja Elssel;Kaare S?rensen;Ogmundur Petersson
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- FEM;
- CPACS;
- Adjoint Based Optimization;
13.Accelerating Unsteady CFD Simulations Using a Minimum Residual Based Nonlinear Reduced Order Modeling Approach

机译：使用最小剩余的非线性减少阶阶井建模方法加速不稳定的CFD仿真
- 作者：Matteo Ripepi;Stefan Gortz
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- POD;
- CFD;
- Minimum Residual Based Nonlinear Reduced Order Modeling Approach;
14.Application of Reynolds-Stress-Models on Free Shear Layers

机译：雷诺 - 应力模型在自由剪切层的应用
- 作者：Tim Landa;René-Daniel Cécora;Rolf Radespiel
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- SST;
- Application;
- Reynolds-Stress-Models;
15.On Recent Advances in Industrial High-Fidelity Aeroelasticity

机译：关于工业高保真空气弹性的最近进步
- 作者：Bernd Stickan;Frank Schroder;Sebastian Helm;Hans Bleecke
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- CFD;
- CSM;
- FEM;
16.Surrogate-Based Aerodynamic Shape Optimization of a Wing-Body Transport Aircraft Configuration

机译：基于代理的空气动力学形状优化翼身运输飞机配置
- 作者：Zhong-Hua Han;Mohammad Abu-Zurayk;Stefan Gortz;Caslav Ilic
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- CFD;
- SBO;
- Wing-Body Transport Aircraft Configuration;
17.Introduction to Airbus Use-Case 'FlexCraft'

机译：空中客车用例“Flexcraft”简介
- 作者：Frank Theurich;Klaus Becker
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- Introduction;
- Airbus Use-Case;
- "FlexCraft";
18.Automated Structural Design of Composite Forward Swept Wings

机译：复合前向扫翅片的自动结构设计
- 作者：Sascha D?hne;Lars Heinrich
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- Automated Structural Design;
- Composite Forward;
- Swept Wings;
19.Further Development of CAA Simulation for Isolated and Installed Nozzle Configurations

机译：用于隔离和安装喷嘴配置的CAA仿真的进一步发展
- 作者：Andrej Neifeld;Roland Ewert
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- CAA;
- Further Development;
- Isolated;
20.Numerical Computations of Isolated and Installed Engine Jet Flows

机译：隔离和安装的发动机喷射流量的数值计算
- 作者：Arne Stürmer;Carlos Màrquez-Gutierrez;Peer B?hning
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- TAU;
- DLR;
- Installed Engine Jet Flows;
21.Development of Flight Control Functions for Integration in Gust Load Simulations

机译：用于集成阵风负荷模拟的飞行控制功能的开发
- 作者：Alexander Hamann
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- TU;
- Development;
- Flight Control Functions;
22.A Method for the Calculation of Large Deformations in Aeroelastic Applications

机译：气弹性应用中大变形计算方法
- 作者：Markus Ritter
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- A Method;
- Calculation;
- Large Deformations;
23.Treating Non-conforming Sensitivity Fields by Mortar Mapping and Vertex Morphing for Multi-disciplinary Shape Optimization

机译：用砂浆映射处理非符合敏感性田间进行多学科形状优化
- 作者：Altug Emiroglu;Roland Wüchner;Kai-Uwe Bletzinger
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- MDO;
- Treating Non-conforming Sensitivity Fields;
- Mortar Mapping;
24.Application of Adjoint Based Optimization on a MALE Platform

机译：基于兼容基于兼容对男性平台的应用
- 作者：Kolja Elssel;Kaare S?rensen;Ogmundur Petersson
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- FEM;
- CPACS;
- Adjoint Based Optimization;
25.On Recent Advances in Industrial High-Fidelity Aeroelasticity

机译：近期工业高保真空气弹性的进展
- 作者：Bernd Stickan;Frank Schroder;Sebastian Helm;Hans Bleecke
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- CFD;
- CSM;
- FEM;
26.Introduction to Airbus Use-Case 'FlexCraft'

机译：空中客车用例介绍“Flexcraft”
- 作者：Frank Theurich;Klaus Becker
- 会议名称：《Closing Symposium of the German Research Initiative AeroStruct》 | 2018年
- Introduction;
- Airbus Use-Case;
- "FlexCraft";