首页>外文会议>其他>National Conference on Processing and Characterization of Materials

National Conference on Processing and Characterization of Materials

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Morphological and Photoluminescence analysis of Zinc Oxide thin films deposited by RF sputtering at different substrate temperatures

机译：不同底物温度下RF溅射沉积的氧化锌薄膜的形态学和光致发光分析
- 作者：S P Ghosh;K C Das;N Tripathy
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
2.Influence of semisolid heat treatment on aging behavior of Al-Cu alloy

机译：半固体热处理对Al-Cu合金老化行为的影响
- 作者：K Sala;M. Mallik
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
3.Effect of post-curing on thermal and mechanical behavior of GFRP composites

机译：后固化对GFRP复合材料热和力学行为的影响
- 作者：D S Kumar;M J Shukla;K K Mahato
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
4.A comparative assessment of crystallite size and lattice strain in differently cast A356 aluminium alloy

机译：不同铸造A356铝合金微晶尺寸和晶格菌株的比较评价
- 作者：S K Mishra;H Roy;A K Lobar
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
5.Synthesis and Characterization of W_(80)Ni_(10)Mo_(10) alloy produced by mechanical alloying

机译：通过机械合金化产生的W_（80）Ni_（10）MO_（10）合金的合成与表征
- 作者：A. Patra;S.K.Karak;S.Pal
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
6.Characterisation of Sol-Gel Synthesis of Phase Pure CaTiO3 Nano Powders after Drying

机译：干燥后溶胶 - 凝胶合成相纯CatiO3纳米粉末的表征
- 作者：P K Mallik;G Biswal;S.C Patnaik
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
7.A comparative study of the mechanical performance of Glass and Glass/Carbon hybrid polymer composites at different temperature environments

机译：不同温度环境下玻璃和碳杂化聚合物复合材料的力学性能的比较研究
- 作者：M J Shukla;D S Kumar;K K Mahato
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
8.Ratcheting induced cyclic softening behaviour of 42CrMo4 steel

机译：棘轮诱导42crmo4钢的循环软化行为
- 作者：R Krecthi;A K Mondal;K Dutta
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
9.Designing of Sub-entry Nozzle for Casting Defect-free Steel

机译：用于铸造缺陷钢的子入口喷嘴的设计
- 作者：Anupal Sen;B Prasad;J K Sahu
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
10.Modeling of Dephosphorization using Bloated Droplet Theory in Basic Oxygen Steelmaking

机译：基于氧气炼钢中膨胀液滴理论的脱磷理论建模
- 作者：Ankit;T. K. Kundu
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
11.Development of High Capacity Na_(0.7)(Ni_(0.4)Mn_(0.4)Co_(0.1)Fe_(0.1))O2 Cathode Material for Sodium Ion Batteries

机译：开发高容量Na_（0.7）（Ni_（0.4）MN_（0.4）CO_（0.1）FE_（0.1）FE_（0.1））O2用于钠离子电池的阴极材料
- 作者：Chandra Kant Kaithwas;T. K. Kundu
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
12.Effect of mechanical mixing on the microstructure and mechanical properties of Al-based metal matrix composites reinforced with nanocrystalline Al-Ca intermetallics

机译：机械混合对纳米晶体铝金属间金属间化合物加固铝金属基复合材料微观结构和力学性能的影响
- 作者：A. K. Chaubey;Rohit Kumar;Tapas sahoo
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
13.Wear characteristics of Al-AlN composites produced in-situ by nitrogenation

机译：通过氮化产生的Al-Aln复合材料的磨损特性
- 作者：S Pradhan;S K Jena;S C Patnaik
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
14.Production of semi-solid feedstock of A356 alloy and A356-5TiB2 in-situ composite by cooling slope casting

机译：通过冷却斜率铸造生产A356合金的半固体原料和A356-5TIB2原位复合材料
- 作者：S Deepak Kumar;Mihira Acharya;A Mandal
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- Semi-solid processing;
- Rheocasting;
- Cooling Slope;
- A356 alloy;
- TiB2 in-situ composite;
15.Dry sliding wear system response of ferritic and tempered martensitic ductile iron

机译：铁素体和钢制马氏体延性铁的干式滑动磨损系统响应
- 作者：V K JHA;Y H MOZUMDER;S SHAMA
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- SG cast iron;
- dry sliding wear;
- microstructure;
- wear morphology;
16.Metallurgical Analysis of Cracks Formed on Coal Fired Boiler Tube

机译：燃煤锅炉管裂缝冶金分析
- 作者：Rajat Kishor;Tushal Kyada;Rajesh K Goyal
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- Boiler tube;
- Crack;
- Ash corrosion;
- Hoop stress;
- EDS;
- SEM;
17.Mechanical and structure studies of Zr_(50)Cu_(50) glass matrix composites during nano-indentation-a molecular dynamics study

机译：纳米凹陷期间Zr_（50）Cu_（50）玻璃基质复合材料的机械和结构研究 - 分子动力学研究
- 作者：Ashwani Kumar;Natraj Yedla
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
18.Effect of temperature on stability behaviour of functionally graded spherical panel

机译：温度对功能分级球形面板稳定性行为的影响
- 作者：Vishesh R Kar;Subrata K Panda
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
19.Studies on plasma processing of blue dust

机译：蓝尘等等离子体加工研究
- 作者：S K Samal;Sindhoora L P;S C Mishra
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- Blue dust;
- waste utilization;
- plasma smelting;
- argon and nitrogen;
- recovery;
- degree ofmetallization.;
20.Fabrication and characterization of carbon nanofiber (CNF) based epoxy composites

机译：基于碳纳米纤维（CNF）的环氧复合材料的制造与表征
- 作者：S Bal;S Sana
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- Carbon nanofiber;
- epoxy composite;
- flexural modulus;
- glass transition temperature.;
21.Synthesis of nano-stmctured duplex and ferritic stainless steel powders by planetary milling: An experimental and simulation study

机译：行星碾磨合成纳米STMCTUPED双工和铁素体不锈钢粉末：实验性和仿真研究
- 作者：Shalabh Gupta;R. Shashanka;D. Chaira
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- Stainless steel;
- planetary milling;
- Miedema model;
- thermodynamic parameters;
22.Adhesive Wear Behavior of Heat Treated Spheroidal Graphite Cast Iron

机译：热处理球形石墨铸铁的粘合剂磨损行为
- 作者：M. SALIM;S.SHAMA;Y.H.MOZUMDER
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- SG cast iron;
- heat treatment;
- dry sliding wear;
- microstructure;
- hardness;
23.Effect of band-overload on fatigue crack growth rate of HSLA steel

机译：带过载对HSLA钢疲劳裂纹生长速率的影响
- 作者：S.V.Abhinay;Om Prakash Tenduwe;Ajit Kumar
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
24.Air jet erosion test on plasma sprayed surface by varying erodent impingement pressure and impingement angle

机译：通过不同的腐蚀冲击压力和冲击角对等离子喷涂表面进行空气喷射侵蚀试验
- 作者：Ajit Behera;Asit Behera;S C Mishra
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- Erosion wear;
- Plasma spray;
- Mass-loss;
- Surface Properties.;
25.Study of mechanical properties, microstructures and corrosion behavior of al 7075 t651 alloy with varying strain rate

机译：基于应变速率的Al 7075 T651合金机械性能，微观结构和腐蚀行为研究
- 作者：A Mukherjee;M Ghosh;K Mondal
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
26.Effect of process parameters on solidification of Al-33Cu strip in high speed twin roll strip casting- A numerical study

机译：工艺参数对高速双辊条铸造中Al-33Cu条带的凝固的影响 - 一种数值研究
- 作者：Seshadev Sahoo
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
27.Effect of Tempering Temperature and Time on Strength and Hardness of Ductile Cast Iron

机译：回火温度和时间对延性铸铁强度和硬度的影响
- 作者：R. Kumar;R. K. Behera;S. Sen
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- Ductile Cast Iron;
- Tempering;
- Temperature;
- Time;
- Graphite Nodules;
- Retained Austenitic;
- Martensitic;
- ferrite phase;
28.On the microstructural behavior of titanium alloy during non-optimal regime of superplastic deformation

机译：在超塑性变形的非最佳状态下钛合金的微观结构行为
- 作者：R.Sahoo;B.B.Jha;T.K.Sahoo
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
29.Effects of hygrothermal conditions on free vibration behaviour of laminated composite structures

机译：湿热条件对层压复合结构自由振动行为的影响
- 作者：Trupti R Mahapatra;Subrata K Panda
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
30.Experimental and simulation study of flexural behaviour of woven Glass/Epoxy laminated composite plate

机译：编织玻璃/环氧树脂层压复合板弯曲行为的实验和仿真研究
- 作者：Sushree S Sahoo;Vijay K Singh;Subrata K Panda
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
31.Nickel coating on high strength low alloy steel by pulse current deposition

机译：高强度低合金钢镍涂层通过脉冲电流沉积
- 作者：S Nigam;S K Patet;S S Mahapatra
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
32.Recovery of Cu and Zn from Complex Sulphide Ore

机译：从复合硫化物矿石中回收Cu和Zn
- 作者：Trinath Talapaneni;S.Sarkar;N. Yedla
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
33.Development of Cu Reinforced SiC Particulate Composites

机译：Cu加强SiC颗粒复合材料的研制
- 作者：Harshpreet Singh;Lailesh Kumar;Syed Nasimul Alam
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
34.Sea Water Ageing of GFRP Composites and the Dissolved salts

机译：GFRP复合材料的海水老化和溶解盐
- 作者：A P Chakraverty;U K Mohanty;S C Mishra
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2015年
- GFRP composites;
- depth of penetration;
- ILSS;
- glass transition temperature (T_g);
- SEM fractographs;
35.Characterisation of Suspension Precipitated Nanocrystalline Hydroxyapatite Powders

机译：悬浮沉淀纳米晶羟基磷灰石粉末的表征
- 作者：P K Mallik;P.K.Swain;S.C Patnaik
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Nanocrystalline;
- HA;
- Suspension precipitation;
- Morphology;
- Biomaterial;
36.Water absorption behavior and residual strength assessment of glass/epoxy and glass-carbon/epoxy hybrid composite

机译：玻璃/环氧树脂和玻璃/环氧杂交复合材料的吸水性能和残余强度评估
- 作者：S C Mohanty;B P Singh;K K Mahato
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
37.Fabrication of high-k dielectric Calcium Copper Titanate (CCTO) target by solid state route

机译：固态路线的高k介电钙铜钛酸盐（CCTO）靶标
- 作者：N Tripathy;K C Das;S P Ghosh
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Ceramic;
- X-ray diffraction;
- Dielectrics;
- Electron Microscopy;
38.Effect of post-deposition annealing on the structural and electrical properties of RF sputtered hafnium oxide thin films

机译：沉积退火对RF溅射铪薄膜结构和电性能的影响
- 作者：K C Das;S P Ghosh;N Tripathy
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
39.Effect of pre-strain on ratcheting behavior of A668 Class D steel

机译：菌株对A668级D钢棘轮行为的影响
- 作者：S. Tripathy;A. K. Mondal;K. Dutta
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
40.Parametric Optimization of Simulated Extrusion of Square to Square Section Through Linear Converging Die

机译：通过线性会聚模具模拟挤出正方形挤出的参数优化
- 作者：S. K. Mohapatra;K. P. Maity
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Extrusion;
- DEFORM-3D;
- Aluminium alloy;
- Optimization;
41.Synthesis CNTs Particle Based Abrasive Media for Abrasive Flow Machining Process

机译：用于磨料流动加工过程的合成CNTS基于颗粒的磨料介质
- 作者：Sonu Kumar;Q.Murtaza;R.S Walia
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- AFM;
- CNTs;
- TEM;
42.Effect of loading rate on tensile properties and failure behavior of glass fibre/epoxy composite

机译：加载率对玻璃纤维/环氧复合材料拉伸性能及失效行为的影响
- 作者：K K Mahato;M Biswal;D K Rathore
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
43.Equilibrium state of anatase to rutile transformation for nano-structured Titanium Dioxide powder using polymer template method.

机译：聚合物模板法对纳米结构二氧化钛粉体金红石转化的平衡状态。
- 作者：Tapabrata Dam;Sidhartha S. Jena;Dillip K. Pradhan
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
44.Analysis of Effects of Cutting Parameters of Wire Electrical Discharge Machining on Material Removal Rate and Surface Integrity

机译：钢丝电气放电加工切割参数对材料去除率和表面完整性的影响分析
- 作者：H. R. Tonday;A. M. Tigga
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- wire EDM;
- Inconel 625;
- Material Removal Rate (MRR);
- surface Roughness;
- scanning electron microscopy (SEM).;
45.Dielectric properties of epoxy resin fly ash composite

机译：环氧树脂粉煤灰复合材料的介电性能
- 作者：A Pattanaik;S K Bhuyan;S K Samal
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
46.Ultraviolet photodetection characteristics of Zinc oxide thin films and nanostriletu res

机译：氧化锌薄膜和纳米玻璃的紫外线光电检测特性
- 作者：S P Ghosh;K C Das;N Tripathy
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Thin films;
- Nanostructures;
- Photodetection;
- Ultraviolet;
- Zinc Oxide;
47.Dry sliding wear behavior of epoxy composite reinforced with short palmyra fibers

机译：用短棕榈纤维加固环氧复合材料的干式滑动磨损行为
- 作者：Somen Biswal;Alok Satapathy
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
48.An experimental investigation on the effect of particle size on the thermal properties and void content of Solid Glass Microsphere filled epoxy Composites

机译：粒度对固体玻璃微球填充环氧复合材料热性能和空隙含量的实验研究
- 作者：Debasmita Mishra;Alok Satapathy
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Composites;
- Solid Glass Micro-spheres;
- Thermal Conductivity;
- Insulation;
49.Deformation of Ni_(20)W_(20)Cu_(20)Fe_(20)Mo_(20) high entropy alloy for tensile followed by compressive and compressive followed by tensile loading: A molecular dynamics simulation based study

机译：Ni_（20）W_（20）CU_（20）FE_（20）MO_（20）高熵合金的变形，其用于拉伸，然后是压缩和压缩，然后拉伸载荷：基于分子动力学模拟的研究
- 作者：Md. Meraj;S. Pal
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Molecular Dynamics;
- High entropy alloy;
- Twin;
- Atomic diffusion;
50.Improvement of thermal properties of water and ethylene glycol by metallic and ceramic dispersion

机译：金属和陶瓷分散体改善水和乙二醇的热性质
- 作者：Sripooja Mishra;Manaswini Chinara;Mohan Nuthalapati
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Dispersion;
- Thermal conductivity;
- Water;
- Ethylene glycol;
- Surfactant;
51.High Temperature Mechanical Behavior of Aluminum-Cii5oZr5oMetallic Glass Interface

机译：铝制-CII5OzR5O60玻璃界面的高温力学行为
- 作者：P Gupta;N Yedla
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Interface;
- Molecular Dynamics;
- High Temperature;
52.Study on blast furnace cooling stave for various refractory linings based on numerical modeling

机译：基于数值模拟的各种耐火衬里的高炉冷却梯级研究
- 作者：T R Mohanty;S K Sahoo;M K Moharana
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Blast furnace;
- Stave;
- cooling;
- Refractory;
- Stave;
53.Ratcheting fatigue behaviour of Al-7075 T6 alloy: Influence of stress parameters

机译：Al-7075 T6合金的棘轮疲劳行为：应力参数的影响
- 作者：Lala Amarnath;Antara Bhattacharjee;K. Dutta
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
54.Grain boundary character modification employing thermo-mechanical processing in type 304L stainless steel

机译：304L不锈钢采用热机械加工的晶界性状改性
- 作者：S K Pradhan;S Mandal
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
55.Application of Hydrogen for the Reduction of Bauxite Mineral

机译：氢气在减少铝土矿矿物质的应用
- 作者：B. R. Parhi;S. K. Sahoo;B. Bhoi
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Bauxite;
- Reduction;
- Hydrogen;
- Plasma Processing;
- Leaching.;
56.A Study On the effect of Surface treatment on the Physical and Mechanical properties of date-palm stem fiber embedded epoxy composites

机译：表面处理对日期 - 棕榈干纤维嵌入环氧复合材料物理和力学性能影响的研究
- 作者：Satchidananda Tripathy;Janaki Dehury;Debasmita Mishra
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
57.Epoxy matrix composites filled with micro-sized LD sludge: wear characterization and analysis

机译：环氧基质复合材料填充微型LD污泥：磨损表征和分析
- 作者：Abhilash Purohit;Alok Satapathy
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Epoxy composites;
- LD Sludge;
- Characterization;
- Sliding Wear;
- Artificial Neural Network (ANN);
58.Stress Ratio Effect on Ratcheting Behavior of AISI4340 Steel

机译：AISI4340钢棘轮的应力比效应
- 作者：K Divya Bharathi;K Dutta
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
59.Impact resistance and hardness modelling of Aluminium alloy welds using square-headed friction-stir welding tool

机译：方向摩擦搅拌焊接工具铝合金焊缝抗冲击性和硬度建模
- 作者：U.Sudhakar;J.Srinivas
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Friction-stir welding;
- Joint toughness;
- impact strength;
- hardness;
- neural network model.;
60.Effect of Nanosize Yittria and Tungsten Addition to Duplex Stainless Steel During High Energy Planetary Milling

机译：高能量行星铣削过程中纳米尺寸和钨加入双相不锈钢的影响
- 作者：A K Nayak;R Shashanka;D Chaira
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Mechanical alloying;
- DDPM;
- Annealing;
- Phase transformation;
- DSC;
61.Ultrasonic spot welding of dissimilar materials: characterization of welded joints and parametric optimization

机译：不同材料的超声波焊接：焊接接头的表征和参数优化
- 作者：M P Satpathy;S K Sahoo
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
62.Scheming of microwave shielding effectiveness for X band considering functionalized MWNTs/epoxy composites

机译：考虑官能化MWNT /环氧复合材料的X波段微波屏蔽效能的方案
- 作者：SMRUTISIKHABAL;SUMRMAL SABA
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- MWNT/epoxy composite;
- functionalization;
- shielding effectiveness;
- flexural modulus;
- hardness;
63.Studies on Effective Elastic Properties of CNTVNano-Clay Reinforced Polymer Hybrid Composite

机译：CNTVNANO-粘土增强聚合物杂交复合材料有效弹性性能研究
- 作者：Arvind Kumar Thakur;Puneet Kumar;J. Srinivas
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Nano-clay;
- CNT;
- Hybrid composite;
- FEM;
- Halpin-Tsai;
- RVE.;
64.Effect of Post-thermal shock on Prolonged Sea Water aged GFRP Composite

机译：热冲击后延长海水老化GFRP复合材料的影响
- 作者：A. P. Chakraverty;U. K. Mohanty;S. C. Mishra
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- GFRP composite;
- Thermal Shock;
- Inter laminar shear strength;
- Glass Transition Temperature (Tg);
- fibr6 pull-out;
65.Production and Compressive Characterization of Aluminium MMC Foam Manufactured Using Dual Foaming Agent

机译：使用双发泡剂制造铝MMC泡沫的生产和压缩特性
- 作者：S Haidar;S Ansary;A Rahman
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Al-Si MMC foam;
- mechanical behaviour of cellular materials;
- Dual foaming agent.;
66.Cellular Automata Modeling of Decarburization of Metal Droplets in Basic Oxygen Steelmaking

机译：基础氧炼钢中金属液滴脱碳的蜂窝自动机建模
- 作者：T. K. Kundu
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Steelmaking;
- Decarburization;
- Cellular Automata;
- Kinetics;
67.Fabrication and Characterization of novel W_(80)Ni_(10)Nb_(10) alloy produced by mechanical alloying

机译：机械合金化生产的新型W_（80）Ni_（10）Nb_（10）合金的制造和表征
- 作者：R. Saxena;A. Patra;S. K. Karak
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
68.Physical, Mechanical and Water Absorption Behaviour of Coir Fiber Reinforced Epoxy Composites Filled With A12O3 Particulates

机译：基因纤维增强环氧复合材料的物理，机械和吸水行为填充A12O3颗粒
- 作者：Geetanjali Das;Sandhayarani Biswas
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Coir fiber;
- Epoxy;
- A12O3 particulate;
- fiber content;
- fiber length;
- mechanical properties.;
69.Hygrothermal effects on the flexural strength of laminated composite cylindrical panels

机译：湿热对层压复合圆柱板弯曲强度的影响
- 作者：Trupti R Mahapatra;Subrata K Panda
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
70.A Novel Technique for Making Cold Briquettes for Charging in Blast Furnace

机译：一种新型制造高炉充电冷压力的技术
- 作者：M K Mohanty;S Mishra;B Mishra
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
71.Semi-Solid Processing by Electric Current DuringSand Casting of Aluminium Alloys

机译：铝合金电流持续铸造的半固体加工
- 作者：Anjan Prodhan
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Semi Solid Sand Casting;
- Electric Current Treatment;
- Aluminium Alloys;
- Sand Casting;
- GrainRefinemnt;
72.Development of Cu-E-Glass Fiber Composites by Powder Metallurgy Route

机译：粉末冶金途径开发Cu-E-玻璃纤维复合材料
- 作者：Pallabi Bhuyan;Harspreet Singh;Lailesh Kumar
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Wear;
- Hardness;
- Density;
- Reinforcement.;
73.Effect of delamination on vibration behaviour of woven Glass/Epoxy composite plate-An experimental study

机译：分层对编织玻璃/环氧复合板的振动特性的影响 - 一种实验研究
- 作者：C K Hirwani;S S Sahoo;S K Panda
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- Delaminated composites plate;
- Vibration;
- Experimental;
- ANSYS;
74.Free Vibration and Bending Behaviour of CNT Reinforced Composite Plate using Different Shear Deformation Theory

机译：不同剪切变形理论的CNT增强复合板的自由振动和弯曲行为
- 作者：K Mehar;S K Panda
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2016年
- CNT;
- free vibration;
- bending;
- thermal environment;
- FSDT;
- HSDT.;
75.Effect of fiber content on the thermal conductivity and dielectric constant of hair fiber reinforced epoxy composite

机译：纤维含量对毛纤维增强环氧复合材料导热率和介电常数的影响
- 作者：Bisfanu Prasad Nanda;Alok Satapathy
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- Hair fiber;
- dielectric constant;
- thermal conductivity;
- biological waste;
76.Effect of alumina on grain refinement of Al-Si hypereutectic alloys

机译：氧化铝对Al-Si过度晶体合金晶粒细化的影响
- 作者：J Majhi;S K Sahoo;S C Patnaik
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- -γ-Al2O3;
- Al-rich intermetallic compound.;
77.Effect of CNT addition on cure kinetics of glass fiber/epoxy composite

机译：CNT加入对玻璃纤维/环氧复合材料固化动力学的影响
- 作者：A O Fulmali;R Kattaguri;K K Mahato
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
78.Preparation of few layer graphene sheets (FLGS) prepared by an electrochemical method

机译：通过电化学方法制备少数层石墨烯片（FLG）
- 作者：I Alam;K Sa;S das
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
79.Electrodeposition of near stoichiometric CuInSe2 thin films for photovoltaic applications

机译：用于光伏应用的近近化学计量的Cuinse2薄膜电沉积
- 作者：Ramkumar Chandran;Archana Mallik
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- Semiconductor;
- Electrodeposition;
- Thin films;
- Solar cells;
80.Synthesis of Graphene-wrapped Silicon Nanoparticies by Ultra-sonication

机译：用超声超声合成石墨烯包裹硅纳米颗粒
- 作者：P G Kale;Mihir Kumar Sahoo;Nishit Kumar Sadual
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
81.Erosion wear response of epoxy composites filled with steel industry slag and sludge particles: A comparative study

机译：环氧复合材料充满钢铁工业渣和污泥粒子的侵蚀磨损响应：比较研究
- 作者：Abhilash Purohit;Alok Satapathy
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
82.Optical current-voltage characteristics of dip coated TiO2 thin film

机译：浸涂层TiO2薄膜的光学和电流 - 电压特性
- 作者：S.Roy;N.Tripathy;P.K. Sahu
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- Sol gel process;
- annealing;
- Raman;
- MOS;
- electrical characterisation;
83.Experimental investigation of various surface integrity aspects in hard turning of AISI4340 alloy steel with coated and uncoated cermet

机译：用涂层和未涂覆的金属陶瓷硬脑膜硬质转向各种表面完整性方面的实验研究
- 作者：Anshuman Das;S. K. Patel;Ch. Sateesh Kumar
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- Hard turning;
- Surface integrity;
- Cermet;
- Micro hardness;
- White layer;
84.Experimental and numerical investigations on the temperature distribution in PVD AlTiN coated and uncoated AlO3/TiCN mixed ceramic cutting tools in hard turning of AISI 52100 steel

机译：在AISI 52100钢的硬质转向中PVD Altin涂层和未涂覆的铝合金和未涂覆铝混合陶瓷切削工具的实验和数值研究
- 作者：Ch Sateesh Kumar;Saroj Kumar Patel;Anshuman Das
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
85.Simulation of Texture Evolution during Uniaxial Deformation of Commercially Pure Titanium

机译：商业纯钛单轴变形期间纹理演化模拟
- 作者：B.Bishoyi;M.K.Debta;S.K.Yadav
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- Tension;
- Compression;
- Texture;
- EBSD;
- XRD;
- VPSC;
86.Comparison of wear behaviour and mechanical properties of as-cast A16082 and A16082-T6 using statistical analysis

机译：统计分析比较A16082和A16082-T6的磨损行为和机械性能
- 作者：Sandhya Rani Rana;A.B. Pattnaik;S.C. Patnaik
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- Metallographic examination;
- Pin-on-disc wear test;
- Taguchi;
- L9 orthogonal array;
- sliding speed;
87.Optimisation of Ferrochrome Addition Using Multi-Objective Evolutionary and Genetic Algorithms for Stainless Steel Making via AOD Converter

机译：通过AOD转换器使用多目标进化和遗传算法优化铁铬添加和遗传算法
- 作者：Kishore Kumar Behera;Snehanshu Pal
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- Stainless steel making;
- Optimisation;
- Genetic algorithm;
- Ferrochrome;
88.Buckling analysis of SMA bonded sandwich structure — using FEM

机译：SMA键合三明治结构的屈曲分析 - 使用FEM
- 作者：Pankaj V Katariya;Arijit Das;Subrata K Panda
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
89.Influence of thermo-mechanical treatment in ferritic phase field on microstructure and mechanical properties of reduced activation ferritic-martensitic steel

机译：铁素体相域热机械处理对减少激活铁素体 - 马氏体钢的微观结构和力学性能
- 作者：Prakash;J. Vanaja;K. Laha
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
90.Evaluation of the optical characteristics of c-axis oriented zinc oxide thin films grown by sol gel spin coating technique

机译：溶胶凝胶旋转涂层技术生长的C轴取向氧化锌薄膜光学特性评价
- 作者：K. Baisakh;S.Behera;S.Pati
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- Crystal texture;
- Grain growth;
- Optical property;
- Envelope method;
91.Characterization of the Acoustic Radiation Properties of Laminated and Sandwich Composite Panels in Thermal Environment

机译：热环境中夹层和夹心复合板的声学辐射性能的表征
- 作者：Nitin Sharma;Trupti Ranjan Mahapatra;Subrata Kumar Panda
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
92.Sea water Corrosion of Nickel based Plasma Spray Coating

机译：基于镍等离子体喷涂的海水腐蚀
- 作者：M Parida;S P Nanda;S K Bhuyan
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- thermal plasma;
- erosion resistant coating;
- nickel base coating;
- plasma spraying;
- sea water corrosion;
93.Continuum simulation of heat transfer and solidification behavior of AlSilOMg in Direct Metal Laser Sintering Process

机译：直接金属激光烧结工艺中Alsilomg传热和凝固行为的连续模拟
- 作者：Akash Ojha;Mihir Samantaray;Dhirendra Nath Thatoi
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
94.Investigation of consolidation kinetics and microstructure evolution of Al alloys in direct metal laser sintering using phase field simulation

机译：基于相田模拟的直接金属激光烧结中Al合金的固结动力学和微观结构演化研究
- 作者：Bubloom Bimal Satpathy;Jyotirmoy Nandy;Seshadev Sahoo
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
95.Mechanical and microstructural characterization of W-Cu FGM fabricated by one-step sintering method through PM route

机译：通过PM路径通过一步烧结法制造的W-Cu FGM的机械和微观结构表征
- 作者：Rajat Gupta;Rohit Kumar;A.K. Chaubey
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- Mechanical properties;
- Functionally graded material;
- Plasma Facing Material;
- Powder metallurgy;
- Spark Plasma Sintering;
96.Mechanical and Tribological Characteristics of the AMC, Prepared by P/M Route along with Thermo-Mechanical Treatment

机译：通过P / M途径制备的AMC的机械和摩擦学特性以及热机械处理
- 作者：Sambit Kumar Mohapatra;Kalipada Maity;Subrat Kumar Bhuyan
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- AMC;
- Extrusion;
- Powder Metallurgy;
- Wear;
97.Effects of Welding Parameters on Mechanical Properties in Electron Beam Welded CuCrZr Alloy Plates

机译：焊接参数对电子束焊接CucrZR合金板机械性能的影响
- 作者：Sanjib Jaypuria;Nirav Doshi;Dilip Kumar Pratihar
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- CuCrZr alloy;
- Electron Beam Welding;
- Beam Parameters;
- Taguchi Method;
- Tensile Strength;
- Microstructure;
98.Parametric Investigation on Microstructure and Mechanical Properties of Ultrasonic spot welded Aluminium to Copper sheets

机译：超声波焊接铝对铜板微观结构和力学性能的参数研究
- 作者：Mantra Prasad Satpathy;Kasinath Das Mohapatra;Ananda Kumar Sahoo
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
99.Effect of ageing time and temperature on corrosion behaviour of aluminum alloy 2014

机译：老化时间和温度对铝合金2014腐蚀行为的影响
- 作者：Vikas Gadpale;Pragya N. Banjare;Manoranjan Kumar Manoj
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
100.Thermal shock effect on Mechanical and Physical properties of pre-moisture treated GRE composite

机译：预湿度处理的GRE复合材料的机械和物理性质的热冲击效果
- 作者：A.P. Chakraverty;A. B. Panda;U. K. Mohanty
- 会议名称：《National Conference on Processing and Characterization of Materials》 | 2018年
- GRE composite;
- thermal shock;
- ILSS;
- glass transition temperature (Tg);