首页>外文会议>其他>International Conference on Manufacturing Engineering and Process

International Conference on Manufacturing Engineering and Process

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Research Status and Development Trend of Electromagnetic Defect Detection Logging

机译：电磁缺陷检测测井的研究现状及发展趋势
- 作者：YAN Zheng-guo;ZHAO Lin
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Defect detection;
- EM imaging;
- Casing corrosion;
- 3D imaging;
2.The application of risk analysis based on the gray relational analysis in power engineering comprehensive evaluation

机译：风险分析在电力工程综合评价中灰色关系分析的应用
- 作者：Tongtao Ma;Cunbin Li;Lina Ren
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Engineering evaluation;
- Risk analysis;
- Gray relational analysis;
3.Research on the Optimization of Engine Operation Condition Based on Intelligent Automobile

机译：基于智能汽车的发动机运转条件优化研究
- 作者：Sheng Fasheng;Shi Xiangrong
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Automobile engine;
- Sensor;
- Data fusion;
- Multi-valued logic;
4.Analysis on Selection of Water Ring Vacuum Pumps in the Chemical Industry

机译：化工工业水环真空泵选择分析
- 作者：Yu Hongmei
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Water ring vacuum pump;
- Gas flow;
- Chemical industry;
- Model selection;
5.Research on the Exposure Assessment of the Cadmium Ion in Textiles

机译：纺织品中镉离子的曝光评估研究
- 作者：Guozhong Huang;Haichao Bu;Siheng Sun;Chao Wang;Aiji Chen
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Textiles;
- Cadmium;
- Distribution form;
- Exposure model;
6.Achieving Quick Trust Transmission in P2P Network Based on Matrix Operation

机译：基于矩阵操作实现P2P网络的快速信任传输
- 作者：Wang Hao-yu;Zhao Yun-feng;Meng Xiang-de;Ji Xiao-juan
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- P2P Network;
- Trust Degree;
- Algorithm;
7.Accelerate Demodulation of Quadrature Amplitude Modulation Using GPU

机译：加速使用GPU解调正交幅度调制
- 作者：Xiaopeng Gao;Siyuan Wang;Han Wan
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- QAM;
- CUDA;
- GPU;
- Software-defined radio;
- Multithread;
8.An Image Matching Algorithm Based on SUSAN-SIFT Algorithm

机译：一种基于Susan-Sift算法的图像匹配算法
- 作者：ZHANG Huiqing;CAO Luguang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- SIFT algorithm;
- SUSAN algorithm;
- SUSAN-SIFT algorithm;
- Image matching;
9.Measuring and Analyzing the Bevel Gears with Octoid I Teething

机译：用辛辣胶卷测量和分析辛胶齿轮
- 作者：Erzsebet Faluvegi;Csaba Zoltan Mate;Catalin Ionel Coblis;Luciana Cristea
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Bevel gears;
- Measured profile;
- Theoretical profile;
- Error;
- Coordinate measuring machine;
10.Research on a coal gangue identification device

机译：煤矸石识别装置研究
- 作者：Zheng Gangfeng;Zha Jiawei;Liu Haizeng;Li Ling
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Gangue separation;
- Automatic separation;
- Grayscale sensor;
- Guide groove;
11.Voltage Track Prediction Based on WAMS

机译：基于WAMS的电压轨道预测
- 作者：Miao Qian;Yan Feng;Liu Ya-nan
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- WAMS;
- RBF;
- Voltage Track Prediction;
- Data Processing;
12.Design on Arc Plasma Temperature Online Detecting System

机译：电弧等离子体温度在线检测系统设计
- 作者：Hou Chunguangr;Zhang Shiyur;Cao Yundongr;Liu Shuxinr
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Arc plasma temperature;
- Circuit breaker;
- Online detecting;
- Visual interface;
13.Grounding Failure Detection Based on ELM Information Fusion in Distribution Power Systems

机译：基于ELM信息融合在分配电力系统中的接地故障检测
- 作者：Yusheng Zhou;Yongfeng Liu;Xiang Yun;Zhengpan
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Ground fault;
- Information fusion;
- Morphological filtering;
- Fault line selection;
- Extreme learning machine (ELM);
14.Hybrid Modeling Based On Multiple Range Image

机译：基于多范围图像的混合建模
- 作者：Ningjun Ruan;Peng Wu;Kai Xie
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Hybrid modeling;
- Range image;
- Back-project;
- Re-project;
- Triangulation;
- Mistake-filling;
15.Wireless Communication in Vehicle Intelligent Network System

机译：车辆智能网络系统中的无线通信
- 作者：Yingxue Chen;Zhigang Liu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Vehicle network;
- Wireless communication;
- In-vehicle bus network;
- Telematics;
16.The Wireless Sensor Network Routing Algorithm Based on the Small World Model

机译：基于小世界模型的无线传感器网络路由算法
- 作者：Chen Li-Qiang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Wireless Sensor Network;
- Route;
- Small World;
17.First flight experiment with the NERVA-1 inertial platform

机译：第一次飞行实验与神经系统 - 1惯性平台
- 作者：Cristian E. Constantinescu;Radu D. Rugescu;Silviu Ciochina;Remus C. Cacoveanu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Space vehicles;
- Flight control;
- Inertial guidance;
- Inertial sensors;
18.Predicting RNA Secondary Structure Using a Improved BPSO Based on Stem Combination

机译：基于茎组合使用改进的BPSO预测RNA二级结构
- 作者：Yi Qi
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- RNA;
- Secondary structure;
- PSO;
- Prediction;
19.Love Wave in an Isotropic Half-space with a Graded Layer

机译：在各向同性的半空间中使用分级层
- 作者：Ligang Zhang;Hong Zhu;Hongbiao Xie;Jian Wang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Functionally graded materials;
- WKBJ method;
- Love wave;
- Wave velocity;
- Dispersion;
20.A Fast Handoff Emulation Platform Base on V2V

机译：在V2V上的快速切换仿真平台底座
- 作者：ZHOU Lian-bing
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- VANETs;
- Handoff;
- Emulation;
- DHCP;
21.Optical fiber sensor salt dense on -line monitoring research

机译：光纤传感器盐密集在线监测研究
- 作者：Liu Gao;Wu Lihui;Liu Baoqiang;Zhang Hu;Zheng Jinbei;Shen Hong
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Optical sensor;
- Insulator;
- Pollution;
- Salt dense;
- On-line monitoring;
22.The Influence on lightning invasion Waves from UHV Substation Bus Arresters

机译：来自UHV变电站总线避孕船的雷电入侵波的影响
- 作者：Yusheng Zhou;Jun Xiang;Jianwu Zheng;Long Zeng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Ultra high voltage substation;
- Bus lines;
- Lighting invasion waves;
23.A K-medoids clustering algorithm based on Particle Swarm Algorithm with Simulated Annealing

机译：一种基于模拟退火粒子群算法的K-METOIDS聚类算法
- 作者：Hong Zhou;Ke Luo
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- K-medoids algorithm;
- Particle Swarm Algorithm;
- Simulated Annealing;
24.Fast 3-D feature point detector based on Harris

机译：基于哈里斯的快速3-D特征点探测器
- 作者：Jingguo Lv;Weizhe Kong;Dongyue Li
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- 3-D;
- Harris detector;
- Image smoothing;
- Strength;
25.Research on Temperature Control System Based on Intelligent Electronic Boiler

机译：基于智能电子锅炉的温度控制系统研究
- 作者：XU Guo-sheng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Temperature control;
- Fuzzy PID control;
- Parameters tuning;
- Electric boiler;
26.Fast Interrogation Method Based on Two Superimposed Fiber Bragg Gratings

机译：基于两个叠加光纤布拉格光栅的快速询问方法
- 作者：Youchun Ma;Changjang Wang;Yuanhong Yang;Jinming Li
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Superimposed fiber Bragg gratings;
- Interrogation;
- Dynamic strain;
27.Fault Line Selection in Distribution Networks Based on Parameter Identification in Frequency Domain

机译：基于频域参数识别的分发网络中的故障线选择
- 作者：SUONAN Jia-le;LI Zong-peng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Distribution network;
- Fault line selection;
- Matrix pencil method;
- Least squares estimation;
- Parameter identification;
28.Ultrasonic Image De-noising Based on New Wavelet Threshold Function

机译：基于新小波阈值函数的超声图像去噪
- 作者：Yanxia Liu;Bing Han;Yan Li;Beibei Dong;Yanyan Cao
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Wavelet transform;
- Threshold;
- De-noising;
- Ultrasonic image;
29.Wireless Mesh Network Technical Security Performance Analysis

机译：无线网状网络技术安全性能分析
- 作者：Dongya Chen
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Wireless Mesh;
- Security;
- Performance analysis;
- MPR;
- SR;
30.A Selective Naive Bayesian Classification Algorithm Based on Rough Set

机译：基于粗糙集的一种选择性天真贝叶斯分类算法
- 作者：HU Yin-e;LUO Ke
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Naive Bayesian;
- Condition independence assumption;
- Attribute selection;
- Rough set;
31.An Improved Adaptive Unsharp Masking Image Enhancement Algorithm

机译：一种改进的自适应unsharp屏蔽图像增强算法
- 作者：ZHU Li;ZHU Chun-qiang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Unsharp masking;
- Laplacian;
- Image contrast enhancement;
- Adaptiv;
32.Temperature Control System Based on Intelligent Electronic Boiler

机译：基于智能电子锅炉的温度控制系统
- 作者：XU Guo-sheng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Temperature control;
- PID control;
- Electric boiler;
33.Geothermal Parameters Test System Based on ARM S3C2440

机译：基于ARM S3C2440的地热参数测试系统
- 作者：Bai Peng;Junming Xu;Siqiang Zou
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Geothermal Parameters;
- S3C2440;
- Device Drive of Embedded;
- Linux;
- Qt4;
34.A New High Frequency Transformer PV Grid-connected Inverter

机译：新型高频变压器PV电网连接逆变器
- 作者：Ye Geng;Li Gong;Y. B. Chen
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Inverter;
- Grid connected photovoltaic power system;
- High frequency transformer inverter;
35.Radom Intermediate Points Based Path Planning in Unknown Environment

机译：基于Radom中间点在未知环境中的路径规划
- 作者：Qi-Lei Xu;Gong-You Tang;Hai-Lin Liu;Shao-Ting Ge;Xue Yang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Path planning;
- Bug algorithm;
- Autonomous mobile agents;
- Unknown environment;
36.Design on Flow Measurement Solution with Intelligent Efflux Coefficient Standard Throttling Gear

机译：智能流出系数标准节流齿轮流量测量解决方案的设计
- 作者：Duan Quansheng;Zhao Qing;Wang Licui
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Standard throttling gear;
- Efflux coefficient;
- Span measurement range;
- Differential pressure;
- Small-signal cut away;
37.A New P2P Streaming Media VOD System Based on Window

机译：基于窗口的新P2P流媒体VOD系统
- 作者：Qiang Li;Liangbin Chen;Zhonghua Wang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Window;
- Bandwidth;
- Abruptness;
38.Fabric Defect Automated Detection Technology

机译：织物缺陷自动化检测技术
- 作者：XU Guo-sheng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Defect detection;
- Fabric;
- Computer vision;
- Data acquisition;
39.An Efficient P2P Overlay Network Model Based on Clustering

机译：基于聚类的高效P2P叠加网络模型
- 作者：Qiang Li;Liangbin Chen;Yuke Chen
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Overlay Network;
- P2P;
- Directory Server;
40.Research on the Electromagnetic Compatibility of Microcomputer Protection

机译：微电脑保护电磁兼容性研究
- 作者：LIU Min;SONG Hua Wei;ZHAO Jin Feng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Smart substation;
- Electro-magnetic compatibility (EMC);
- Anti-interference;
41.The Auxiliary Equipments of the Machine-Tools Pneumatic Systems

机译：机床气动系统的辅助设备
- 作者：Dan Prodan;Anca Bucuresteanu;Emilia Balan
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Pneumatic Drives;
- Machine-Tools;
- Auxiliary Equipment;
- Auxiliary Kinematic Chains;
42.Study on the Models of Relationship Between the Rebound Effect and Energy Efficiency

机译：反弹效应与能源效率之间的关系模型研究
- 作者：Liu Pingping
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Rebound effect;
- Energy efficiency;
- Technological progress;
43.Research and Implement of a Robot Networking Method Based on Jini Techniques

机译：基于JINI技术的机器人网络方法研究与实现
- 作者：Wang Mei
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Robot;
- Networking;
- Jini;
- Lookup Service;
- Service Proxy;
44.Detection of Flicker Caused by Interharmonics Based on the Voltage Envelope Mean FFT

机译：基于电压包络的间谐波引起的闪烁检测平均值为FFT
- 作者：Zuhua Ren;Bolin Wang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Flicker;
- Interharmonics;
- Voltage envelopes;
- The envelope mean;
- FFT;
- Amplitude correction;
45.Contributions Regarding the Practicality of a Quantum Pair Space Thruster

机译：关于量子对空间推进器的实用性的贡献
- 作者：Valeriu Dragan
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Quantum pair formation;
- Space propulsion;
- Photonic propulsion;
46.A Study of Clinic of Leukoaraiosis and Stereoscopy of Nuclear Magnetic Resonance

机译：核磁共振脑卒中病诊所临床研究
- 作者：Jiajun Chen;Xiufeng Yang;Yunhua Zhao;Xiya Jin;Yuanbing Li;Lihong Huang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Leukoaraiosis;
- Nuclear magnetic resonance;
- Stereoscopy;
- Neuropsychological scale (HDS);
47.A MATLAB-based Study on the Realization and Approximation Performance of RBF Neural Networks

机译：基于Matlab的RBF神经网络的实现与近似性能研究
- 作者：DING Shuo;CHANG Xiao-heng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Radial basis function;
- Neural network;
- Function approximation;
- Simulation;
- MATLAB;
48.The Application of Animation Logo in Modern Visual System

机译：动画徽标在现代视觉系统中的应用
- 作者：Yong Jun Chen;Jun Han
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Animation logo;
- Creative industry;
- Visual system;
- Digital times;
49.Experimental Study of the Wheel Drive EV with External Rotor Switched Reluctance Motor

机译：外转子开关磁阻电动机的车轮驱动EV的实验研究
- 作者：Gao Lianxue;Sun Diansheng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Outer rotor;
- Switched reluctance motor;
- Drive control system;
- Torque current;
50.Study on the dynamic behavior of the ball passage vibrations associated with a linear rolling bearing

机译：与线性滚动轴承相关的球通道振动的动态行为研究
- 作者：Ting Chen;Qibai Huang;Shande Li;Weiguang Zheng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Dynamic behavior;
- Ball passage vibration;
- Linear rolling bearing;
51.Mechanical Analysis of Fracturing String with Double Packers in Horizontal Well

机译：水平井双包装箱压裂绳的力学分析
- 作者：Zhi-miao LI;Qianbei Yue;Ju-bao LIU
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Horizontal well;
- Fracturing string;
- Double packers;
- Gap element;
- Force and deformation;
52.Flame Stability of Methane/Air Mixture in a Heat-Recirculating-Type Mesoscale Channel with a Bluff-Body

机译：甲烷/空气混合物在热再循环式Messcale通道中的火焰稳定性，具有诈唬体
- 作者：Zhe Cheng;Wenjun Wang;Wenqing Shen;Aiwu Fan;Wei Liu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Micro-combustion;
- Methane/air mixture;
- Heat-recirculation;
- Bluff-body;
- Stable combustion range;
53.Research Of Data Model In Engineering Flight Simulation Platform Based On Meta-Data

机译：基于元数据的工程飞行仿真平台数据模型研究
- 作者：Liu Jinxin;Xu Hong;Shen Weiqun
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Meta-data;
- Data model;
- Flight simulation;
54.The Research of the Affection of Wiring on the Induction Motor Direct Torque Control

机译：布线对电动机直接扭矩控制的影响研究
- 作者：LIU Yanli;JIA Tao;CHENG Ze
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Induction motor;
- Direct torque control;
- Wiring;
- Stator voltage vector;
55.A Finite Element Analysis in Structural Design of Wall-troweling Robot

机译：墙面抹灰机器人结构设计的有限元分析
- 作者：Yuming Han;Meijing Guo
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Wall-troweling robot;
- Structural design;
- Virtual prototype;
- Finite element analysis;
56.The design of 13.56MHz RFID reader antenna

机译：13.56MHz RFID读取器天线的设计
- 作者：Haifeng Zhang;Yao Tong
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- RFID technology;
- THM3060;
- Reader antenna;
57.A Compact Hybrid Sound Absorber Using Flexible Micro-Perforated Panel and Piezoelectric Actuator

机译：使用柔性微穿孔面板和压电执行器的紧凑型混合声吸音器
- 作者：Weiguang Zheng;Yingfeng Lei;Qibai Huang;Chuanbing Li
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Micro-perforated panel;
- Active control;
- Sound absorption;
- PZT actuator;
58.The Design of Temperature Measuring System Based on ARM

机译：基于臂的温度测量系统设计
- 作者：Jinge Sang;Guoli Yu;Yanan Wang;Jun Zhang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Temperature;
- Measuring;
- Display;
- S3C2410;
59.A Safety Evaluation Model of Large Space Building Based on AHP Algorithm

机译：基于AHP算法的大型空间建设安全评价模型
- 作者：Sun Huiying;Wang Jia;Xiao Zenan
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- AHP;
- Large space building;
- Safety degree;
60.The Research on Creep Deformation and Thermal Stress of Cast Copper Staves

机译：铸铜桩蠕变变形及热应力研究
- 作者：SHI Lin;Cao Fu jun
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Blast furnace;
- Cast copper staves;
- Temperature field;
- Thermal stress;
- Creep deformation;
61.Implementation of CRC by Using FPGA in Data Communication

机译：使用FPGA在数据通信中实现CRC
- 作者：Lie Wang;Yijie Wang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- CRC;
- Fast implementation;
- Verilog HDL;
- FPGA;
62.The Un Destructive Examination by Active Pulse Thermography of the Layers Deposited by Thermal Spraying

机译：通过热喷涂沉积的层的主动脉冲热成像通过脉冲热成像进行破坏性检查
- 作者：Viorel-Cristian DINA;Gabriel Marius DUMITRU;Constantin Dumitrascu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Active thermography;
- Metal spraying;
- Nondestructive testing (NDT);
63.Implementation of the DES Algorithm on EDA Box

机译：EDA框的DES算法的实现
- 作者：Xuemei Li;Li Li
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- EDA (Electronic Design Automation);
- Hardware implementation;
- DES algorithm;
64.A Improved Infrared and Visible Images Matching Based on SURF

机译：基于冲浪的改进的红外和可见图像匹配
- 作者：Dongmei LI;Jinglei ZHANG
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Matching;
- Edge detection;
- SURF;
- Euclidean distance;
65.A Research on the Performance of Grey Chassis Organic Coating on Vehicle Equipment

机译：灰色底盘有机涂层对车辆设备性能的研究
- 作者：Xu Antao;Luo Bing;Zhang Fan;Zhang Tianru;Wang Ying
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Vehicle equipment;
- Corrosion;
- Organic coating;
- EIS;
66.Design of the pulse triggered by Three- phrase controlled rectifier circuit

机译：三个词组控制整流电路触发的脉冲设计
- 作者：LI RUI
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- PIC16F877A voltage-controlled oscillator(VCO for short) CD4020;
- Triggering;
- Pulse;
67.The Application of CCD Sensor in Fabric Defect

机译：CCD传感器在织物缺陷中的应用
- 作者：XU Guo-sheng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Fabric defect;
- Detection;
- CCD;
- Data acquisition;
68.Simulation Research on Shielding Effect of the Computer Box Against Strong Electromagnetic Pulses

机译：电脑箱对强电磁脉冲屏蔽效果的仿真研究
- 作者：Bing Cao;Chenglong Liu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Strong electromagnetic pulse;
- Shielded computer box;
- Resonance frequency;
- Shielding effectiveness;
- Simulation;
- Finite element method;
69.Modeling and simulation of a small-scale mining road header's constant power system

机译：小型采矿路线恒电系统的建模与仿真
- 作者：Li Yanxi;Song Dechao;Liu Gang;Geng Huangeng;Gong Liangfa
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Mining road header;
- Constant power hydraulic system;
- Mathematical model;
- Working stability;
- AMESim;
70.Study on PLC Interference Suppression Technique Monitoring System of The Airport Power Supply Equipment

机译：PLC干扰抑制技术监测系统的研究机场电源设备
- 作者：WEI Xiaobin;ZHU Yi;LU Song;ZHANG Wei
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Airdrome power supply;
- Interference suppression technique;
71.Fault signal adaptive detection research and design with the high noisy Environment

机译：具有高噪声环境的故障信号自适应检测和设计
- 作者：Xu Wei;Wang Zhongce
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- High noise;
- Adaptive detection;
- Chirp-z transform;
- FFT algorithm;
- Cepstrum analysis;
72.Study on Reasons of the Falling of the Overhead Line Based on Fault Tree Analysis

机译：基于故障树分析的架空线下降的原因研究
- 作者：WEI Fei-xiang;SONG Yang;MA Xiao-xu;QIAN Ying
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Overhead Line Falling;
- FTA;
- Reliability;
73.A Microscopic Study of Before-arc Process in Metal Vapor Plasma's Proximal Cathode Region Part II the Influence of Macroscopic Parameters on the Proximal Cathode Region

机译：金属蒸汽等离子体近端阴极区第II部分近弧形弧形过程的微观研究对近端阴极区的宏观参数的影响
- 作者：Jing Li;Qiuting Yu;Yundong Cao;Xiaoming Liu;Chong Xu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Before-arc process;
- Influence parameters;
- Numerical simulation;
- Secondary emission coefficient;
- Vacuum arc;
74.Nonlinear Normal Modes of a continuous cantilever beam with Nonlinear Energy Sink Absorber

机译：具有非线性能量吸收器的连续悬臂梁的非线性正常模式
- 作者：Chen Yong;Xu Yi
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Nonlinear energy sink absorber;
- Nonlinear normal mode;
- Continuous cantilever beam;
75.A Microscopic Study of Before-arc Process in Metal Vapor Plasma's Proximal Cathode Region Part I Formation of the Proximal Cathode Region

机译：金属蒸汽等离子体近端阴极区近端阴极区域的前弧过程的微观研究I构成近端阴极区域
- 作者：Jing Li;Qiuting Yu;Yundong Cao;Xiaoming Liu;Chong Xu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Before-arc process;
- Microscopic model;
- Proximal cathode region;
- Vacuum arc;
76.The Design of Temperature Control Base on Fuzzy Control

机译：模糊控制温度控制底座的设计
- 作者：XU Guo-sheng
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Temperature control;
- Fuzzy PID control;
- Electric boiler;
77.Study of multiple quantum beats in atomic wavepackets

机译：原子波袋中多量子搏动的研究
- 作者：Changjun Zhu;Bing Xue;Xuejun Zhai;Junfang He
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Coupled four-wave mixing;
- Multiple quantum beats;
- Coherent dynamics;
78.A speech endpoint detection based on empirical mode decomposition and average magnitude difference function

机译：基于经验模式分解和平均幅度差函数的语音端点检测
- 作者：Weiwei Shi;Weihua Xiong;Yunyun Chu;Yu Liu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
79.The Transmission Characteristics of Lord Mode and Analysis on Section Dimension Design in Rectangle Wave Guide

机译：矩形波导截面尺寸设计的主模式和分析的传输特性
- 作者：Yiquan Shao;Yunbo Zhang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Rectangular waveguide;
- Fundamental mode;
- Power capacity;
- Attenuation;
80.A Study on variable frequency control of Precooling Pump Motors

机译：预冷泵电动机变频控制研究
- 作者：JIN Xing;JIANG Changhong;Li xiangguang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Air separation system;
- Variable frequency control;
- Voltage vectors;
81.Study on the Strength Design of Cold Deformation Strengthening Material

机译：冷变形强化材料强度设计研究
- 作者：Tie Shan Zhang;Qun Feng Ma
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Strength;
- Fatigue;
- Residual stress;
- Shot peening;
82.Estimating Strength of Concrete Using a Genetic Algorithm Combining Operation Tree (GAOT)

机译：用遗传算法结合操作树（山羊）混凝土估算强度
- 作者：Kuan-Ting Chen;Li Chen;You-Rong Fu;Sing-Han Chen
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
83.Modeling of Conducted EMI in Electric Vehicle Motor Drive System

机译：电动汽车电机驱动系统中的开展EMI的建模
- 作者：Yongming Yang;Hengmeng Peng;Quandi Wang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- EMI;
- Motor drive system;
- Modeling;
- Power cables;
- Inverter;
- Ac motor;
84.The automatic Non-negative matrix factorization of the hierarchy clustering method

机译：层次结构群集方法的自动非负矩阵分解
- 作者：Li Tieqi;Zhang Wenshuo
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Non-negative matrix factorization;
- Clustering method;
- Association rules;
85.The Well-posedness of a Two-unit Standby Redundant Electronic Equipment System

机译：两个单元备用冗余电子设备系统的良好良好
- 作者：Xing QIAO;Yan WANG;Dan MA;Zhuang LIU
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- The Well-posedness;
- Steady-state solution;
- Electronic equipment system;
86.The Impact of Electric Vehicle Charging Stations on Power Flow Calculation and Grid Loss

机译：电动车充电站对功率计算和电网损耗的影响
- 作者：Yutian Sun;Huadong Zhang;Zhihui Li;Jianxiang Li;Cheng Qi;Zhizhen Liu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Electric vehicles;
- Charging stations;
- Power flow;
- Grid loss;
87.Analysis on the application of the VRF air-conditioning compressor in the field of freezing and cold storage

机译：VRF空调压缩机在冷冻和冷藏领域中的应用分析
- 作者：Yongan YANG;Zhao YANG;Qiubo XU
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- VRF air-conditioning compressor;
- R410a;
- Compression Ratio;
- Compound Compression;
- Thermodynamic Calculation;
- Intermediate Pressure;
88.Simulation on Before-arc Process of Large Current Breaking in Vacuum Circuit Breaker

机译：真空断路器大电流断裂前弧过程的仿真
- 作者：Jing Li;Yundong Cao;Xiaoming Liu;Qiuting Yud
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Vacuum arc;
- Arc-before;
- Space charge;
- Sheathe;
- Dynamic electric field strength;
89.The Finite Element Analysis of the Large-scale Converter Transformer Valve Side of the Electric Field

机译：电场大型转换器变压器阀侧的有限元分析
- 作者：Linsuo Zeng;Zhe Wu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Converter transformer;
- Electric field analysis;
- Finite element analysis;
90.A Research on the Protective Performance of Green Organic Composite Coating on Vehicle Equipment

机译：绿色有机复合涂层对车辆设备的保护性能研究
- 作者：Xu Antao;Luo Bing;Zhang Fan;Jin Fu;Liu Yangyang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Vehicle equipment;
- Corrosion;
- Electrochemical impedance spectroscopy;
91.The Calculation and Estimate of Interval-valued and Fuzzy Dirichlet series' Coefficient

机译：间隔值和模糊Dirichlet系列系数的计算与估计
- 作者：Duan Yu;Luo Hongjian
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Nterval-valued Dirichlet series;
- Fuzzy Dirichlet series;
- Uniformly convergent;
- Calculation;
92.The analysis of the thunder and lightning cause about the airport automatic charging station and the lightning model

机译：雷霆雷控雷控机场自动充电站及闪电模型分析
- 作者：Guyong Han;Baocheng Wang;Jun Zhou;Song Lu
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
93.Modification of the dynamic characteristics of the tool tip by adding mass on tool-tool holder system

机译：通过添加刀具架系统的质量改造工具尖端的动态特性
- 作者：Shen Yang;Chen Yongjie;Chen Chen;Li Ning
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Tool holder;
- Adding mass;
- Dynamic characteristics;
- Chatter suppression;
94.Wavelet Denoising of SAR Images Corrupted by Speckle Noise Using Cycle Spinning

机译：使用循环旋转的斑点噪声损坏的SAR图像小波去噪
- 作者：Mingwei Ji;Yanli Liu;Dexiang Zhang
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Wavelet Transform;
- SAR Image;
- Speckle Noise;
- Cycle Spinning;
95.Study on Stress and Strain of Anchorage Using Finite Element Method

机译：用有限元法测定锚固应变与应变研究
- 作者：Chen Congsheng;He Ping;Wang Chengyong;Chen Xuehui;Huang Lei;Lei Jingfa
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Stress;
- Strain;
- Anchorage;
- Finite element method;
96.Multi-channel Data Acquisition and CAN Communication System Based on Single-chip Microcomputer

机译：基于单片机的多通道数据采集和CAN通信系统
- 作者：Jianping Wang;Guotai Jiao
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Single-chip Microcomputer;
- CAN controller;
- Data acquisition;
97.Design and Implementation of an Active RFID System Based on Bluetooth Low Energy

机译：基于蓝牙低能的活动RFID系统的设计与实现
- 作者：Yijun Cui;Chenghua Wang;Chunlin Chen
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Bluetooth Low Energy;
- Active RFID;
- CC2540;
- NFC;
98.Intelligent System of Brain Tumor Automation Diagnosis Based on Image Analysis and Mining

机译：基于图像分析和采矿的脑肿瘤自动化诊断智能系统
- 作者：Peng Wu;Ningjun Ruan;Kai Xie
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Brain tumor;
- Image analysis and mining;
- Shape recognition;
99.Mobile Storage and Data Security Management Research

机译：移动存储和数据安全管理研究
- 作者：Wenying Zeng;Yuelong Zhao
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- Mobile Storage;
- Mobile Data;
- Security Management;
- Policies;
- Architecture;
100.Research on User Classification Based on Usability Tests of Generalpurpose Emergency Maintenance Vehicle User Models

机译：基于通用的可用性测试的用户分类研究了通用应急维护车辆用户模型的用户分类
- 作者：Liu Ning;Wu Leiming;Shi Hongxia
- 会议名称：《International Conference on Manufacturing Engineering and Process》 | 2013年
- General-purpose emergency maintenance vehicle;
- Usability tests;
- User classification;