首页>外文会议>其他>International Conference on Extrusion and Benchmark

International Conference on Extrusion and Benchmark

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Towards predictive control of extrusion weld seams: an integrated approach

机译：朝向挤出焊缝的预测控制：综合方法
- 作者：A.J. den Bakker;R.J. Werkhoven;W.H. SilIekens
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- aluminium alloys;
- weld seams;
- metal flow;
- structure evolution;
- modelling;
2.Accurate Welding Line Prediction in Extrusion Processes

机译：挤出过程中精确的焊接线预测
- 作者：T. Kloppenborg;N. Ben Khalifa;A. E. Tekkaya
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Extrusion;
- Welding Line;
- Seam Weld;
- Finite Element Method;
3.Numerical Investigations of Welding Conditions During Extrusion of 2024 Alloy Through Porthole Dies

机译：通过舷窗模具挤出2024合金焊接条件的数值研究
- 作者：D. Lesniak;A. R§kas;W. Libura
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Extrusion;
- Porthole dies;
- Welding conditions;
- AlCuMg alloys;
- FEM analysis;
4.Numerical Modeling of Extrusion Welding in Magnesium Alloys

机译：镁合金挤出焊接的数值模拟
- 作者：Yan Xu;Wojciech Z. Misiolek
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Magnesium alloys;
- Extrusion welding;
- Weldingseam;
- DEFORM?;
- Welding criterion.;
5.Numerical Analysis of Four-Hole Extrusion of Aluminum Alloys

机译：铝合金四孔挤出的数值分析
- 作者：W. Libura;A. Rekas;D. Lesniak
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- extrusion;
- metal flow;
- four-hole die;
- aluminum alloys;
- numerical calculations;
6.An Assessment of the Grain Structure Evolution during Hot Forward Extrusion of Aluminum Alloy 7020

机译：铝合金热向挤出过程中谷物结构演化的评价7020
- 作者：A. FoydI;N. Ben Khalifa;A. Brosius
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Extrusion;
- Aluminum;
- Microstructure;
- Finite Element Analysis;
7.Numerical Analysis of Aluminum Alloys Extrusion Through Porthole Dies

机译：通过舷窗模具的铝合金挤出的数值分析
- 作者：J. Zasadzinski;A. Rekas;W. Libura
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- extrusion;
- porthole dies;
- welding chamber;
- aluminum alloys;
- numerical calculations;
8.Numerical and experimental investigations of the production processes of coextruded Al/Mg- compounds and the strength of the interface

机译：共挤出Al / Mg-化合物生产过程的数值和实验研究及界面的强度
- 作者：K. Kittner;B. Awiszus
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Aluminium-magnesium compound;
- coextrusion;
- bonding strength;
- finite element method;
9.Simulation of the co-extrusion of hybrid Mg/AI profiles

机译：杂交Mg / Ai型材共挤出的模拟
- 作者：J. Muehlhause;S. Gall;S. Mueller
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Magnesium;
- Aluminum;
- Co-extrusion;
- Material flow;
- Extrusion seams;
10.Contrasting models to determine the approximate extrusion process conditions for the first billet

机译：对比模型来确定第一坯的近似挤出过程条件
- 作者：M. Sabater;M. L. Garcia-Romeu
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- First billet;
- ram speed;
- billet temperature;
- process parameters;
- neural network tool;
11.THREE DIMENSIONAL UPPER BOUND MODELLING FOR EXTRUSION OF ROUND-TO-OCTAGON SECTION USING LINEARLY CONVERGING DIE

机译：用线性收敛模具挤出圆形到八角形部分的三维上限模型
- 作者：K P Maity;A. K. Rout
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- SERR;
- Round;
- Octagon;
- Extrusion;
- Die;
12.A case study to solve the problem of wall thickness attenuation during extrusion to produce a complex hollow magnesium profile

机译：案例研究解决挤出过程中的壁厚衰减问题，以产生复杂的空心镁
- 作者：L. Li;J. Zhou;X. He
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Magnesium;
- Extrusion;
- Hollow profile;
- Porthole die;
- FEM simulation;
13.Combined numerical simulation and microstructure characterization for rediction of physical properties in extruded aluminum alloys

机译：结合数值模拟和微观结构表征，以降低挤出铝合金的物理性质
- 作者：W. Z. Misiolek;W.R. Van Geertruyden
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Aluminum Alloys;
- Extrusion;
- PCG;
- Torsion;
- GDRX;
- CDRX;
- Recrystallization;
14.FEM-assisted design of a multi-hole pocket die to extrude U-shaped aluminum profiles with different wall thicknesses

机译：FEM辅助设计的多孔袋模具，以挤出具有不同壁厚的U形铝型材
- 作者：G. Fang;J. Zhou;J. Duszczyk
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Aluminium;
- Extrusion;
- Die;
- FEM;
15.Computer-Aided Simulation of Metal Flow through Curved Die for Extrusion of Square Section from Square Billet

机译：通过弯曲模拟金属流动的计算机辅助模拟，用于挤出方坯的方形部分挤出
- 作者：K. P. Maity;A.K. Rout;Kalu Majhi
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Extrusion;
- cosine die;
- Dual stream function;
- Upper-Bound;
- Square section;
16.Study of flow balance and temperature evolution over multiple aluminum extrusion press cycles with HyperXtrude 9.0

机译：高速挤出压机循环的流量平衡与温度演化研究9.0
- 作者：Amin Farjad Bastani;Trond Aukrust;Inge Skauvik
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Aluminum extrusion;
- flow balance;
- temperature evolution;
- FEM;
- HyperXtrude;
17.Friction in double action extrusion

机译：双重动作挤出的摩擦
- 作者：Liliang Wang;Jie Zhou;Jurek Duszczyk
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Friction;
- FEM simulation;
- Extrusion;
- Aluminum;
18.Prediction of the extrusion load and exit temperature using artificial neural networks based on FEM simulation

机译：基于FEM仿真的人工神经网络预测挤出负荷和出口温度
- 作者：J. Zhou;L. Li;J. Mo
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- FEM simulation;
- Artificial neural network;
- Extrusion;
- Magnesium;
19.Analysis of polypropylene deformation In a 135° ECAE die: experiments and three-dimensional finite element simulations

机译：135°ECAE模具中聚丙烯变形分析：实验与三维有限元模拟
- 作者：B. Aour;F. Zairi;M. Nait-Abdelaziz
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Polypropylene;
- ECAE;
- Experiments;
- Finite element analysis;
20.Extrusion Benchmark 2009 Experimental analysis of deflection in extrusion dies

机译：挤出基准2009挤出模具偏转试验分析
- 作者：D. Pietzka;N.Ben Khalifa;L. Donati
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Extrusion;
- Benchmark;
- Die Deformation;
- Deflection measurements;
21.Physically based mfcrostructure modelling of AA6082 during hot extrusion

机译：热挤压期间AA6082的物理基于MFcrostructure建模
- 作者：F. Krumphals;P. Sherstnev;S. Mitsche
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- AA6082;
- hot extrusion;
- FEM;
- microstructure modelling;
- dislocation density evolution;
- nucleation;
22.The use of extruded profiles as filling material in Friction Stir Welding (FSW)

机译：挤压型材作为搅拌搅拌焊接填料（FSW）的填充材料
- 作者：L. Donati;L. Tomesani
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Friction Stir Welding;
- AA6082;
- filling material;
- extruded profile;
23.Simulation of Porthole Die Extrusion Process comparing NEM and FEM modelling

机译：孔孔模具挤出过程仿真比较NEM和FEM建模
- 作者：I. Alfaro;F. Gagliardi;E. Cueto
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- NEM;
- FEM;
- Extrusion;
- meshless methods;
24.Effect of tube wall thickness in Joining of Aluminum Tube and Holed Rib by Extrusion

机译：管壁厚度在铝管和孔肋连接中的影响
- 作者：T. Moroi;T. Kuboki;M. Murata
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- New extrusion method;
- Finite element method;
- Joining;
- Guide position;
- Tube wall thickness;
25.Numerical design of extrusion process using finite thermo-elastoviscoplasticity with damage Prediction of chevron shaped cracks

机译：具有有限热弹性缺陷性的挤出过程的数值设计，具有守墙形状裂缝的损伤预测
- 作者：C. Labergere;K. Saanouni;P. Lestriez
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- chevron cracks;
- extrusion;
- thermo-elastoviscoplasticity;
- ductile damage;
- numerical design;
- FEM;
26.Analysis of metal flow of aluminum through long choked die channels

机译：通过长呼吸模具通道分析铝金属流动
- 作者：Henry Valberg
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Metal flow;
- die channel;
- contact conditions;
- shear layer;
- plug flow;
27.Simulation of gas and spray quenching during extrusion of aluminium alloys

机译：铝合金挤出过程中气体喷雾淬火的仿真
- 作者：M. Reich;S. Schone;O. Kessler
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Aluminium alloy;
- quenching simulation;
- gas quenching;
- spray quenching;
28.Creep-fatigue interaction In the AISI H11 tool steel

机译：AISI H11工具钢中的蠕变 - 疲劳相互作用
- 作者：B. Reggiani;M. DAscenzo;L. Donati
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Creep-fatigue interaction;
- AISI H11 tool steel;
- Extrusion die;
- Tool lifetime;
29.Measuring the Deformation of a Flat Die by Applying a Laser Beam on a Reflecting Surface

机译：通过在反射表面上施加激光束来测量平模的变形
- 作者：W. Assaad;H.J.M. Geijselaers;K.E.Nilsen
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- extrusion;
- deformation;
- decoupled;
- die;
30.Modeling and Simulation of Microstructure Evolution in Extruded Aluminum Profiles

机译：挤出铝型材中微观结构演化的建模与仿真
- 作者：F. Parvizian;T. Kayser;B. Svendsen
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Aluminum alloys;
- Extrusion;
- Microstructure;
- Functionally-graded material (FGM);
- Simulation;
31.Analysis of Joint Quality along Welding Plane

机译：沿焊接平面的关节质量分析
- 作者：E. Ceretti;L. Filice;L. Fratini
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- FEM;
- Extrusion;
- Welding Line;
32.Integrated Extruder Plant Automation with Learning Control

机译：综合挤出机植物自动化与学习控制
- 作者：Madhukar Pandit
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Extrusion automation;
- modelling;
- control;
- lumped parameter;
- identification;
33.Constitutive Equations for Hot Extrusion of AA6005A, AA6063 and AA7020 Alloys

机译：AA6005A，AA6063和AA7020合金热挤出的组成方程
- 作者：Tommaso Pinter;Mohamad EI Mehtedi
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Constitutive equations;
- AA6063;
- AA7020;
- flow stress;
- FEM simulations;
34.Constitutive laws for the deformation estimation of extrusion die in the creep-fatigue regime

机译：沿蠕变疲劳制度挤出模具变形估计的本构规定
- 作者：Barbara Reggiani;Lorenzo Donati;Luca Tomesani
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- extrusion die;
- creep-fatigue;
- deformation mechanism;
- constitutive law;
- AlSl H11.;
35.Conditions for sticking friction between aluminium alloy AA6060 and tool steel in hot forming

机译：铝合金AA6060与热成型工具钢摩擦条件
- 作者：F. Wideroe;T. Welo
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Extrusion;
- friction;
- pressure;
- elevated temperatures;
36.Coupled Simulative-Experimental Procedure for Studying the Solid State Bonding Phenomena

机译：耦合模拟 - 研究固态粘合现象的实验过程
- 作者：Gianluca DUrso;Michela Longo;Elisabetta Ceretti
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Solid state bonding;
- Aluminum;
- Extrusion;
- FEM.;
37.New Concepts for Cooling of Extrusion Dies Manufactured by Rapid Tooling

机译：用于冷却挤出模具的新概念，通过快速工具制造
- 作者：Ramona Holker;Andreas Jager;Nooman Ben Khalifa
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Hot aluminum extrusion;
- die cooling;
- rapid tooling;
38.Extrusion Benchmark 2011: Evaluation of different design strategies on process conditions, die deflection and seam weld quality in hollow profiles

机译：挤出基准2011：对流程条件下不同设计策略的评价，中空剖面中的焊盘偏转和缝焊质量
- 作者：Alessandro Selvaggio;Antonio Segatori;Ahmet Guzel
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Extrusion;
- Benchmark;
- Die Deformation;
- Deflection measurements;
39.An Approach to Simulate Shape Distortion due to Cooling in Aluminum Extrusion

机译：一种模拟铝挤出冷却引起的形状畸变的方法
- 作者：S. Bikass;B. Andersson;X. Ma
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Extrusion;
- Cooling;
- FEM;
- Boundary Condition;
40.A new cone-friction test for evaluating friction phenomena in extrusion processes

机译：用于评估挤出过程中摩擦现象的新锥形摩擦试验
- 作者：C. Karadogan;R. Grueebler;P. Hora
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Friction modeling;
- Aluminum extrusion;
41.Processing of wrought magnesium alloys to produce small tubes for biomedical applications: investigation about the extrusion process by a laboratory test rig

机译：用于生产生物医学应用的锻磁镁合金的加工：实验室试验台挤出过程的研究
- 作者：Qiang Ge;Maurizio Vedani
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Magnesium alloys;
- Extrusion;
- Texture;
- Twinning;
42.Numerical and experimental study on seam welding behavior in extrusion of micro-channel Tube

机译：微通道管挤出中缝焊行为的数值和实验研究
- 作者：Ding Tang;Qingqing Zhang;Dayong Li
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- micro-channel tube;
- aluminum extrusion;
- seam welding;
43.Effect of strain rate on metal flow pattern in T-section extrusion process

机译：应变率对T型挤出过程中金属流动模式的影响
- 作者：Pouria Homayoun;Mostafa Ketabchi.
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- T-section extrusion;
- Strain rate;
- Metal flow pattern;
44.Modeling of friction phenomena in extrusion processes by using a new torsion-friction test

机译：用新的扭转摩擦试验建模挤出工艺中的摩擦现象
- 作者：Pavel Hora;Maysam Gorji;Bekim Berisha
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Aluminum extrusion;
- Torsion-Tribo-Test;
- Shear Friction model;
- Coating.;
45.Experimental and numerical analysis of the friction condition in the die bearing during aluminum extrusion

机译：铝挤出过程中模具摩擦条件的实验性和数值分析
- 作者：S. Muller;J. Muhlhause;J. Maier
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Friction;
- extrusion;
- die bearing;
- coating;
- simulation;
46.Co-extrusion of Aluminium-Titanium-Compounds

机译：共挤出铝 - 钛 - 化合物
- 作者：N. Grittner;B. Striewe;A. von Hehl
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
47.Finite element modelling of the charge welds evolution in a porthole die

机译：电荷焊接在舷窗模具中的有限元建模
- 作者：Barbara Reggiani;Antonio Segatori;Lorenzo Donati
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- charge weld;
- porthole die;
- seam weld;
- FE simulation;
48.Co-extrusion of Aluminium-Titanium-Compounds

机译：共挤出铝 - 钛 - 化合物
- 作者：N. Grittner;B. Striewe;A. von Hehl
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- aluminium;
- titanium;
- co-extrusion;
- diffusion layer;
- intermetallic layer;
49.Factors Influencing Bonding Mechanics in FSW of AA5754

机译：影响AA5754 FSW中粘接力学的因素
- 作者：Gianluca Buffa;Livan Fratini;Fabrizio Micar
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Friction Stir Welding;
- Bonding;
- FEM model.;
50.Analysis of Gas Pocket Formation during Extrusion of Al Hollow Profiles and Establishing an Extrusion Seam Weld Limit Diagram

机译：Al中空型材挤出过程中气体袋形成分析，建立挤出缝焊缝限制图
- 作者：Yawar Abbas Khan;Sepinood Torabzadeh Khorasani;Henry Sigvart Valberg
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Porthole extrusion;
- Extrusion seam welds;
- Gas pocket formation.;
51.Advanced technologies used in the manufacture of products from aluminium alloys powder in extrusion process

机译：用于制造铝合金粉末在挤出过程中的产品的先进技术
- 作者：Barttomiej Pfonka;Juliusz Senderski
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Al alloys;
- powders;
- extrusion;
- plastic consolidation;
- mechanical properties.;
52.Design and Experimental Verification during Extrusion of Square sections from Round Billets through Curved dies.

机译：通过弯曲模具挤出圆形坯料挤出过程中的设计和实验验证。
- 作者：Akshaya Kumar Rout;Kalipada Maity;Manoja Kumar Parida
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Die Profile;
- Extrusion;
- Uniform Microstructure;
- Cad Model;
- square section;
53.Experimental and Numerical Investigations on Metal Flow during Direct Extrusion of EN AW-6082

机译：EN-6082直接挤出过程中金属流动的实验性和数值研究
- 作者：M. Kammler;T. Hadifi;M. Nowak
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Metal Flow;
- Direct Extrusion;
- Shear Zone;
- Visioplastic methods;
- Numerical Simulation;
54.The Process of Co-extrusion - An Analysis

机译：共挤出过程 - 分析
- 作者：Kai Kittner;Brigit Awiszus
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- co-extrusion;
- bi-metals;
- aluminum;
- magnesium;
- FEA;
- numerical method;
- statistical analysis;
- compound quality.;
55.Influence of Contact Friction Conditions on Thin Profile Simulation Accuracy in Extrusion

机译：接触摩擦条件对挤压薄型模拟精度的影响
- 作者：Sergey Stebunov;Nikolay Biba;Andrey Lishnij
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Simulation;
- Finite Elements;
- Profiles;
- Extrusion;
- Bearing.;
56.Experimental and numerical analysis of material flow in porthole die extrusion

机译：舷窗模具挤出材料流动的实验性和数值分析
- 作者：T. Kloppenborg;M. Schwane;N. Ben Khalifa
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Extrusion;
- material flow;
- porthole die;
- visioplastic analysis;
57.Investigation of Conclad Extrusion and Multi-Billet Extrusion

机译：调查定位挤出与多坯挤出
- 作者：M. Hoshino
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Conform Extrusion;
- Clad Wire;
- Multi-Billet Extrusion;
- Curved Frame.;
58.Simulation of the Grain Structure Evolution of a Mg-Al-Ca-Based Alloy during Hot Extrusion Using the Cellular Automation Method

机译：使用蜂窝自动化方法在热挤出过程中模拟Mg-Al-Ca基合金的晶粒结构演化
- 作者：L. Li;F. He;X. Liu
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Extrusion;
- Magnesium;
- Microstructure evolution;
- Celular automation.;
59.Aluminium Extrusion Weld Formation and Metal Flow Analysis in Hollow Profile Extrusions of Different Section Thickness

机译：铝挤出焊接和金属流分析在不同截面厚度的中空型材挤出中
- 作者：Yawar Abbas Khan;Henry Sigvart Valberg
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Hollow profile extrusion;
- Extrusion welds;
- Non-symmetric metal flow;
- Grid pattern;
60.High Strength Aluminium Alloys Extrusions - a Review of the Thermo- Mechanical-Process in High Performance Profile Manufacturing

机译：高强度铝合金挤压 - 高性能型材制造中的热机械综述
- 作者：Ola Jensrud
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- High strength alloys;
- Extrudability;
- Mechanical properties.;
61.Simulation of Hot Extrusion of an Aluminum Alloy with Modeling of Microstructure

机译：用微观结构建模铝合金热挤压模拟
- 作者：A. Ockewitz;D.-Z. Sun;F. Andrieux
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- aluminum extrusion;
- simulation;
- microstructure;
- recrystallization;
- friction test;
62.Optimization of Aluminium Extrusion by Porthole Die Using a Down Scaled Equipment

机译：舷窗模具的铝挤压优化使用下缩放设备
- 作者：F. Gagliardi;G. Ambrogio;L. Filice
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Extrusion;
- Porthole Die;
- Aluminium Alloy.;
63.Effect of liquid nitrogen die cooling on extrusion process conditions

机译：液氮模具冷却对挤出工艺条件的影响
- 作者：Lorenzo Donati;Antonio Segatori;Barbara Reggiani
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- extrusion;
- dies;
- nitrogen cooling;
- process monitoring.;
64.Surface quality prediction in aluminum extrusion

机译：铝挤压的表面质量预测
- 作者：M.B. de Rooij;X. Ma;A.J. den Bakker
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- Aluminium extrusion;
- surface quality;
- modelling;
- pickups;
- AA6063;
65.3D FEM-NEM Material Joining Simulation In Porthole Die Extrusion

机译：3D FEM-NEM材料在舷窗模具挤出中加入模拟
- 作者：F. Gagliardi;I. Alfaro;L. Filice
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- NEM;
- FEM;
- Extrusion;
- meshless method.;
66.Modelling of thermo-mechanical Behaviour of Magnesium Alloys during Indirect Extrusion

机译：间接挤压过程中镁合金热力学的建模
- 作者：S. Erturk;D. Steglich;J. Bohlen
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
67.Simulation of the Quench Sensitivity of the Aluminum Alloy 6082

机译：铝合金淬火敏感性仿真6082
- 作者：A. Guzel;A. Jager;N. Ben Khalifa
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Aluminum;
- Jominy End-Quench Test;
- Finite Element Analysis;
68.Localization of the Shear Zone in Extrusion Processes by means of Finite Element Analysis

机译：通过有限元分析将剪切区定位在挤出过程中
- 作者：Matthias Kammler
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Extrusion;
- Shear Zone;
- Interaction;
- FEA;
- Shear Criteria;
69.Manufacturing of Carbon/Resin Separator by Die Sliding Extrusion

机译：用模具滑动挤出制造碳/树脂分离器
- 作者：M. Hoshino;K. Suzuki
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2010年
- Die sliding extrusion;
- Fuel cell separator;
- Orthogonal channels;
70.Experimental Analysis of Velocity Fields in Hot Extrusion of Aluminium Alloy 6351

机译：铝合金热挤出速度场的实验分析6351
- 作者：Marcelo Martins;Sergio Button;Jose Bressan
- 会议名称：《International Conference on Extrusion and Benchmark》 | 2012年
- metal forming;
- extrusion;
- visioplasticity;
- stripe technique;
- contrast pins.;