首页>外文会议>其他>Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement

Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.THE USE OF A (mu)CMM IN THE CALIBRATION OF HARDNESS INDENTERS

机译：使用（mu）cmm在硬度压圈的校准中
- 作者：O Kruger;L Mostert
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Rockwell hardness;
- ISO 6508-3;
- (mu)CMM;
2.THE APPLICATION AND EFFECTS OF THIN SHEET HARDNESS REFERENCE MATERIALS WITHOUT AGING EFFECT

机译：薄板硬度参考材料的应用与效果而无老化效应
- 作者：LI Heping;ZHOU Xing
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- hardness test;
- uncertainty;
- reference material;
3.TEST CYCLE CALIBRATION SYSTEM FOR ROCKWELL HARDNESS TESTER

机译：罗克韦尔硬度测试仪的测试周期校准系统
- 作者：G. W. Bahng;N.H. Tak;J. Y. Song;J.H. Hahn
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Calibration;
- Testing cycle;
- Rockwell hardness;
4.WORLDWIDE ACTIVITIES AROUND HARDNESS MEASUREMENT - ACTIVITIES IN CCM/CIPM, IMEKO/TC5, OIML/TC10 AND ISO/TC164

机译：全球硬度测量活动 - CCM / CIPM，IMEKO / TC5，OIML / TC10和ISO / TC164中的活动
- 作者：Kozo Iizuka
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Hardness standards;
- IMEKO;
- CIPM;
5.TUNGSTEN SINGLE CRYSTAL AS HARDNESS STANDARD FOR NANOINDENTATION

机译：钨单晶作为纳米凸缘的硬度标准
- 作者：Kensuke MIYAHARA;Takashi YAMAMOTO
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- pop-in;
6.MEASUREMENT OF A RESIDUAL IMPRESSION BY THE LASER SCANNING MICROSCOPE WITH DIC UNIT

机译：用DIC单元测量激光扫描显微镜的残余印象
- 作者：Masayuki Fujitsuka;Makoto Yamaguchi;Shigeru Ueno;Genichiro Kamiyama;Shigeo Katayama
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Nanoindentation;
- residual impression;
- laser scanning microscopy;
7.DEVELOPMENT OF A MICRO-MINIATURE NANOINDENTATION INSTRUMENT

机译：开发微型微型纳米狭窄仪器
- 作者：Zhi Li;Sai Gao;Konrad Herrmann
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Micro-miniature;
- nano-indentation;
- MEMS;
8.INVESTIGATION OF NANO-INDENTATION ON FREE-STANDING FILMS FOR THE DETERMINATION OF TENSILE TEST PARAMETERS

机译：用于测定拉伸试验参数的独立膜的纳米压痕研究
- 作者：Zhi Li;Sai Gao;Konrad Herrmann
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Nanoindentation instrument;
- free-standing film;
- spherical indentation;
- optical microscopy;
- optical sectioning;
- topography measurement;
9.CALIBRATION OF INSTRUMENTS FOR HARDNESS TESTING BY USE OF A STANDARD

机译：使用标准校准硬度测试的仪器
- 作者：Joachim Fruhauf;Eva Gartner;Konrad Herrmann;Febo Menelao;Dieter Schwenk;Thomas Chudoba;Hans-Peter Vollmar
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Hardness Testing;
- Calibration;
- Si-Standard;
10.UNCERTAINTY EVALUATION OF MODULUS AND HARDNESS FOR THE NANOINDENTATION MEASUREMENT SYSTEM

机译：纳米狭窄测量系统模量和硬度的不确定性评价
- 作者：Jiong-Shiun Hsu;Sheng-Jui Chen;Hui-Ching Lu;Shear-Shi Pan;Gwo-Jen Wu;Chung-Lin Wu;Chin-fen Tuan
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Uuncertainty;
- nanoindentation;
11.HARDNESS MEASUREMENT OF COATING THIN FILM BY INDENTATION PROFILE OBSERVATION USING SCANNING PROBE MICROSCOPY

机译：使用扫描探针显微镜通过压痕轮廓观察涂层薄膜的硬度测量
- 作者：Shigeo Sato;Masayuki Sato
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- nano-indentation;
- scanning probe microscopy;
- nano-haradness;
12.VERIFICATION OF THE STANDARD MACHINE FOR THE MACRO RANGE OF INSTRUMENTED INDENTATION TEST

机译：验证仪表缩进测试宏范围的标准机
- 作者：Harald Kohlhoff;Christian Ullner
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- indentation;
- standard;
- verification;
13.ANALYSIS AND ESTIMATION OF POSSIBLE LARGE SYSTEMATIC ERROR IN BRINELL HARDNESS MEASUREMENTS

机译：Brinell硬度测量中可能的大型系统误差的分析与估计
- 作者：Alessandro Germak;Claudio Origlia
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Brinell hardness;
- influence parameters;
- numerical aperture;
14.THE MICRO-HARDNESS ANISOTROPY OF FLUOR-OLIGOMERIC AND Fe-Co-W COATINGS

机译：氟 - 低聚和Fe-Co-W涂层的微硬度各向异性
- 作者：Vytautas Vasauskas;Juozas Padgurskas;Raimundas Rukuiza
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- micro-hardness;
- thin films;
- failure;
15.INFLUENCE OF DIFFERENT NUMERICAL APERTURES ON HARDNESS VALUES USING AN AUTOMATIC SYSTEM OF MEASUREMENT

机译：不同数值孔径对使用自动测量系统硬度值的影响
- 作者：Renato R. Machado;Sergio P. de Oliveira;Claudio A. Koch;Islei D. da Silva;Bianca da C. O. Muniz
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Hardness;
- Indentation;
- Numerical Aperture;
16.INDIRECT VERIFICATION OF ELASTOMER HARDNESS TESTERS USING HARDNESS REFERENCE BLOCKS

机译：使用硬度参考块间接验证弹性体硬度测试仪
- 作者：A. Stibler;K. Herrmann
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Hardness;
- uncertainty;
- rubber;
- indirect verification;
17.TOLERANCING FORM DEVIATIONS FOR NIST STANDARD REFERENCE MATERIAL (SRM) 2809 ROCKWELL DIAMOND INDENTERS

机译：Totaning NIST标准参考材料（SRM）2809罗克韦尔钻石压头的偏差
- 作者：John Song;Sam Low;Li Ma
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Rockwell hardness;
- diamond indenter;
- form deviation;
18.DIFFERENCES OF PERFORMANCE BETWEEN THE STEEL STANDARD BLOCKS FOR HARDNESS MADE IN JAPAN AND THAT IN GERMANY IN THE DISPLACEMENT RANGE FROM NANO TO MICROMETER

机译：在日本制造的硬度和德国在位移范围内的钢铁标准块之间的性能差异从纳米到千分尺
- 作者：Yusuke Yoshikawa;Shigeo Katayama;Satoshi Takagi;Tatsuya Ishibashi;Motofumi Ohki
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- nanoindentation;
- hardness reference block;
- coefficient of variation;
19.APPLICATION OF INDENTATION TEST TO THE EVALUATION OF TBC YOUNG'S MODULUS

机译：压痕试验在TBC杨氏模量评价中的应用
- 作者：Motofumi OHKI;Tatsuya ISHIBASHI;Jun KINOSHITA;Hiroki UCHIYAMA
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Thermal barrier Coatings;
- Young's modulus of top-coat;
- Indentation test;
20.CALIBRATION AND MEASUREMENT CAPABILITY MONITORING PROCESS UNDER APMP ACTIVITIES

机译：APMP活动下的校准和测量能力监测过程
- 作者：Takashi Usuda;Hajime Ishida;Yutaka Seino;Satoshi Takagi;Koichiro Hattori;Hidetaka Imai
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- MRA;
- CMC;
- Metre Convention;
- inter-comparison;
- quality system;
21.ANALYSIS OF INDENTATION DEPTH DEPENDENCE OF ELASTIC PROPERTIES OF INTER-LAYER DIELECTRIC FILMS ON SILICON

机译：硅层间介电膜的弹性性能缩进深度依赖性分析
- 作者：Yutaka Seino
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Nanoindentation;
- Low-k;
- Elastic modulus;
22.APPLICATION OF INSTRUMENTED INDENTATION TECHNIQUE TO ESTIMATE STRENGTH AND RESIDUAL STRESS

机译：仪表压痕技术在估算强度和残余应力的应用
- 作者：Min-Jae Choi;Kyung-Woo Lee;Ju-Young Kim;Kwang-Ho Kim;Dongil Kwon
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Instrumented Indentation Technique (IIT);
- Tensile Properties;
- Residual Stress;
23.INVESTIGATION OF BRINELL INDENTATION DIAMETER FROM CONFOCAL MICROSCOPE MEASUREMENT AND FEA MODELING

机译：来自共聚焦显微镜测量和FEA造型的Brinell压痕直径的研究
- 作者：Li Ma;Sam Low;John Song
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Brinell hardness;
- Finite Element Analysis (FEA);
- pile-up;
24.INVESTIGATION OF A GROUP STANDARD OF ROCKWELL DIAMOND INDENTERS

机译：罗克韦尔钻石压痕群标准调查
- 作者：D. Schwenk;K. Herrmann;G. Aggag;F. Menelao
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Rockwell diamond indenter;
- group standard;
- Rockwell hardness scales;
25.RECENT CHANGES AND ADDITIONS TO THE HARDNESS TEST METHODS DEVELOPED AND PUBLISHED BY ASTM-INTERNATIONAL

机译：最近的变化和Astm-International开发和发布的硬度测试方法的变化和补充
- 作者：Samuel Low;Rodney Jiggetts
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- ASTM;
- hardness;
- standard;
26.TEST-LOCATION SPECIFICATION BY MEANS OF HARDNESS MAPPING ON VICKERS BLOCK SURFACE

机译：通过在维氏块表面上的硬度映射测试 - 测试定位规范
- 作者：Rugkanawan KONGKAVITOOL;Satoshi TAKAGI;Takashi USUDA
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Non-uniformity;
- Stratified sampling;
- ANOVA;
27.DEFINITION OF NEW INDUSTRIAL HARDNESS TEST USING EQUIVALENT INDENTATION DEPTH

机译：使用等效压痕深度的新工业硬度测试的定义
- 作者：Takashi Yamamoto;Kensuke Miyahara
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- new hardness test;
- similarity;
- indentation depth index;
- nanoindentation;
- Rockwell hardness;
28.NEW DEVELOPMENTS AND APPLICATIONS IN HARDNESS METROLOGY

机译：硬度计量的新发展与应用
- 作者：Konrad Herrmann
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Hardness metrology;
- measurement uncertainty;
- tendencies;
29.DEVELOPMENT OF HIGH-ACCURACY HARDNESS STANDARD BLOCKS IN JAPAN AND FUTURE OUTLOOK

机译：日本和未来前景的高精度硬度标准块的发展
- 作者：Hiroshi Yamamoto;Takashi Yamamoto
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- Hardness tests;
- Hardness standard blocks;
- Testing conditions;
- Variability;
- Equivalent indentation depth;
30.EXPERIENCE IN THE METROLOGICAL CHARACTERIZATION OF PRIMARY HARDNESS STANDARD MACHINES

机译：主要硬度标准机器测量表征的经验
- 作者：Alessandro Germak;Alfonso Liguori;Claudio Origlia
- 会议名称：《Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement》 | 2009年
- hardness;
- primary standards;
- measuring systems;