首页>外文会议>其他>Symposium on composite materials: Testing, design, and acceptance criteria

Symposium on composite materials: Testing, design, and acceptance criteria

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Detection and Characterization of Imperfections in Composite Pressure Vessels

机译：复合压力容器中缺陷的检测与表征
- 作者：James L. Walker;Samuel S. Russell;Matthew D. Lansing;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- thermography;
- composite materials;
- microstructure;
2.Measurement of CTE at Reduced Temperature for Stressed Specimens

机译：测量压力降低温度的CTE
- 作者：Han Zhu;Wen-Ying Li;Ampere A. Tseng;Patrick Phelon;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- coefficient of thermal expansion (CTE);
- micro mechanical test;
- stress;
- strain;
- reduced temperature;
3.Computational Prediction of Yarn Structure of 3D-Braided Composites

机译：3D编织复合材料纱线结构的计算预测
- 作者：Guillaume Terpant;Prakash Krishnaswami;Youqi Wang;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- optimization;
- 3D-braided composites;
- preform;
- yarn structure;
4.Principles for Recovering Micro-Stress in Multi-Level Analysis

机译：复苏微胁迫在多级分析中的原理
- 作者：Youqi Wang;Changjie Sun;Xuekun Sun;Nicholas J. Pagano;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- micro-mechanics;
- multi-level analysis;
- homogenization;
5.Multi-Axial Composite Tube Test Methodz

机译：多轴复合管测试方法
- 作者：David Cohenauthor_name/;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- tube;
- composite;
- multi-axial;
- test;
- pressure;
- torsion;
- tension/compression;
- helical;
- filament wound;
- carbon fiber;
- epoxy resin;
- failure criteria;
6.Qualification Using a Nested Experimental Design

机译：使用嵌套实验设计的资格
- 作者：Dan Ruffner;Pierre Jouin;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- composite;
- qualification;
- experiment;
- nest;
- regression;
7.Tabbed Versus Untabbed Fiber-Reinforced Composite Compression Specimens

机译：标签与未带有无标签的纤维增强复合压缩样本
- 作者：Donald F. Adamsauthor_name/;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- compression testing;
- compressive strength;
- specimen configurations;
- specimen tabs;
- loading methods;
- analysis;
- testing;
8.The Effect of Moisture, Matrix and Ply Orientation on Delamination Resistance, Failure Criteria and Fracture Morphology in CFRP

机译：CFRP中水分，基质和帘布层取向对分层抗性，破坏标准和断裂形态的影响
- 作者：Emile S. Greenhalgh;Sunil Singh;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- delamination;
- fractography;
- mixed-mode bend;
- failure criteria;
- moisture;
- ply interface;
- mechanisms;
9.Buckling and Fracture Behavior of Tapered Composite Panels Containing Ply Drops

机译：含有层滴的锥形复合面板的屈曲和断裂行为
- 作者：Basant K. Parida;K. Vijayaraju;P. D. Mangalgiri;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- carbon fiber composite panels;
- tapered;
- ply drop;
- buckling load;
- finite element analysis;
- room temperature test;
- hot/wet environment;
- fracture behavior;
10.Interlaminar Crack Propagation in CFRP: Effects of Temperature and Loading Conditions on Fracture Morphology and Toughness

机译：CFRP中的InterlaMinar裂纹繁殖：温度和负载条件对骨折形态和韧性的影响
- 作者：Anders Sjoegren;Leif E. Asp;Emile S. Greenhalgh;Matthew .J. Hiley;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- carbon fiber reinforced plastics;
- CFRP;
- fatigue;
- delamination;
- fractography;
11.Philosophies for Assessing Durability of Commercial and Infrastructure Composite Systems

机译：评估商业和基础设施复合系统耐久性的哲学
- 作者：Scott W. Case;Kenneth L. Reifsnider;John J. Lesko;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- durability;
- life prediction;
- residual strength;
12.Structural Integrity Assessment of Composite Pressure Test Box through Full Scale Test

机译：通过满量程测试的复合压力测试箱的结构完整性评估
- 作者：Basant K. Parida;P. K. Dash;S. A. Hakeem;K. Chelladurai;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
13.Damage Resistance and Damage Tolerance of Pultruded Composite Sheet Materials

机译：拉挤复合板材的损伤性和损伤耐受性
- 作者：R Prabhakaran;M. Saha;M. Douglas;A. T. Nettles;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- pultruded composites;
- transverse indentation;
- damage resistance;
- damage tolerance;
- compression;
- equivalent hole diameter;
14.Mechanical Degradation of Continuous Glass Fibre-Reinforced Thermoplastics under Static and Cyclic Loading: A Prepreg Laminate - Technical Textile Comparison

机译：静态和循环载荷下连续玻璃纤维增强热塑性塑料的机械降解：Prepreg层压板 - 技术纺织品比较
- 作者：Johannes F. Neft;Karl Schulte;Peter Schwarzer;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- glass/polypropylene;
- microstructure;
- morphology;
- prepregs;
- technical textile;
- mechanical degradation;
- fatigue;
- failure mechanisms;
15.A Comparison of Quasi-Static Indentation Testing to Low Velocity Impact Testing

机译：诸如静态压痕测试对低速冲击测试的比较
- 作者：Alan T. Nettles;Michael J. Douglas;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- composites;
- static indentation;
- impact;
- transverse loading rate;
16.The Development and Use of a Common Database for Composite Materials

机译：复合材料的共同数据库的开发和使用
- 作者：Peter Shyprykevich;John S. Tomblin;Mark G. Vangel;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- composite materials;
- databases;
- material allowables;
- statistical methods;
- pooling;
- equivalency tests;
- acceptance criteria;
17.Finite Element Analysis of Unidirectional Composite Compression Fest Specimens: A Parametric Study

机译：单向复合压缩Fest标本的有限元分析：参数学研究
- 作者：Peter J. Joyce;Melanie G. Violette;Tess. J. Moon;American Society for Testing and Materials International;STP 1416;STP 1416
- 会议名称：《Symposium on composite materials: Testing, design, and acceptance criteria》 | 2002年
- composite materials;
- compression testing;
- combined loading;
- specimen optimization;
- stress analysis;