首页>外文会议>其他>The Minerals, Metals and materials Society Annual Meeting

The Minerals, Metals and materials Society Annual Meeting

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Strip cast aluminium foil

机译：条形铸铝箔
- 作者：H.E.Ekstrom;P.Charlier
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
2.Evolution of rolling and recrystallization textures in a hot rolled can body stock alloy

机译：热轧罐体中轧制和重结晶纹理的演变
- 作者：B.Ren
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
3.Formability of the cold rolled sheets of AA3004 alloy after the partial annealing

机译：局部退火后AA3004合金冷轧板的可成形性
- 作者：S.Tsuchida;H.Yokoi
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
4.Computer assisted metallurgy for packaging alloys

机译：包装合金的计算机辅助冶金
- 作者：C.Sigli;H.Vichery
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
5.Laser deposition of hydroxyapatite coatings

机译：激光沉积羟基磷灰石涂料
- 作者：R.K.Singh;F.Qian
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
6.The measurment and description of earing in rolled aluminium

机译：轧制铝中饮食的测量和描述
- 作者：A.Oscarsson;H.E.Ekstrom
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
7.Nucleation and growth of recrystallisation in an Al- 1Mn alloy during thermomechanical processing

机译：在热机械加工期间AL-1MN合金中重结晶中的成核和生长
- 作者：P.L.O.Rossi;C.M.Sellars
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
8.Metallurgical and mechanical effects on can bottom wrinkling

机译：冶金和机械效果可以底部皱纹
- 作者：W.M.Betts
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
9.The influence of alloying and processing on the deep drawing performance of food can materials

机译：合金化和加工对食品深层绘图性能的影响
- 作者：S.E.Naess
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
10.The effect of aluminum surface properties on bleedthrough prepared by

机译：铝表面性质对膨胀的影响
- 作者：R.J.Rigge
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
11.Metallugical aspects of aluminium for canmaking

机译：铝烧制的冶金方面
- 作者：P.D.C.Rogers
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
12.Can design transformation

机译：可以设计转型
- 作者：S.M.Knap
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
13.Crystallographic texture in cold rolled 5182 and its change in the panel wall due to shell formation

机译：冷轧5182中的晶体纹理及其在面板壁的变化引起的壳体形成
- 作者：P.A.Hollinshead
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
14.The effect of initial microstructure on the evolution of crystallographic texture in AA3104 during simulation of hot rolling

机译：初始微观结构对热轧模拟AA3104中晶体纹理演化的影响
- 作者：GJ.Marshall;MW.Meredith
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
15.Static recrystallisation of Al-1Mn alloy during thermomechanical processing

机译：热机械加工过程中Al-1Mn合金的静态重结晶
- 作者：P.L.O.Rossi;C.M.Sellars
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
16.Buckle strength loss in 202 diameter beverage can ends

机译：202直径饮料中的扣力损失可以结束
- 作者：M.S.Nagorka;T.C.Sun
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
17.The evolution of crystallographic texture during the recrystallization of hot rolled 5182

机译：热轧2182再结晶过程中晶体纹理的演变
- 作者：P.A.Hollinshead
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
18.A technique to measure intermetallic size distribution in aluminum can body stock

机译：一种测量铝合金体积分布的技术罐体股票
- 作者：X.Wang;R.G.Kamat
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
19.Anisotropy in rolled aluminum sheet as identified by ultrasonic an metallurgical analysis

机译：通过超声波冶金分析鉴定的轧制铝板中的各向异性
- 作者：W.Lu;S.Min
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
- 1500;
20.Necking two-piece beverage cans in the 90's

机译：在90年代收缩两件饮料罐
- 作者：D.Johnson
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
21.The development of high angle deformation boundaries and local orientations in aluminum

机译：铝中高角度变形边界和局部取向的发展
- 作者：D.A.Hughes
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
22.Dispersoid modelling in 3XXX alloys

机译：3xxx合金中的分散型造型
- 作者：J.P.Suni;R.T.Shuey
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
23.Microstructure and texture evolution during thermomechanical processing

机译：热机械加工过程中的微观结构和纹理演化
- 作者：N.Hansen
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 1996年
24.A MICROMECHANICAL CONTINUUM MODEL FOR THE TENSILE BEHAVIOR OF SHAPE MEMORY METAL NANOWIRES

机译：形状记忆金属纳米线拉伸行为的微机械连续体模型
- 作者：Wuwei Liang;Min Zhou
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Constitutive model;
- Nanowire;
- shape memory;
- lattice reorientation;
25.Experimental Micromechanics Study of Lamellar TiAl

机译：层层基成型的实验微机械研究
- 作者：Fu-pen Chiang;Gunes Uzer;Yi Ding
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
26.FATIGUE LIFE VARIABILITY: MODLEING SIMULATION AND LIFE PREDICTION

机译：疲劳寿命变化：模拟仿真与寿命预测
- 作者：Kwai S. Chan;Michael P. Enright
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Fatigue Life;
- Microstructure Variation;
- Stress Life Curves;
- Fatigue Crack Growth;
27.THE FORMATION OF β-PP CRYSTALS IN A COMPATIBILIZED BLEND OF ISOTACTIC POLYPROPYLENE AND POLYAMIDE-6

机译：在同位素聚丙烯和聚酰胺-6的相容化混合物中形成β-PP晶体
- 作者：Ronghua Zhang;Dean Shi;Robert Kwok Yiu Li
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- β-PP;
- Crystallization;
- Blend;
28.DISLOCATION MODELLING OF LOCALIZED PLASTICITY IN PERSISTENT SLIP BANDS

机译：持久性滑条局部可塑性的脱位建模
- 作者：Jaafar A. El-Awady;Nasr M. Ghoniem;Hael Mughrabi
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Persistent Slip Bands;
- Dislocation Dynamics;
- Fatigue Saturation Stress;
29.UNGROOVED MOLD SURFACE TOPOGRAPHY EFFECTS ON CAST SUBSURFACE MICROSTRUCTURE

机译：未加工的模具表面形貌对铸造地下微观结构的影响
- 作者：P. N. Anyalebechi
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Subsurface microstructure;
- Uneven shell growth;
- Laps;
- Shot peening;
30.SYNTHESIS OF DENSE CaO CLINKER FROM LIGHTWEIGHT CaCO_3 WITH OXIDES ADDITION

机译：用氧化物加成的轻质Caco_3合成致密Cao熟料
- 作者：Nan Wang;Min Chen;Jingkun Yu;Yulong Song;Jian Kang
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Lime refractories;
- Lightweight CaCO_3;
- Sintering;
- Oxides addition;
31.PREPARATION OF VANADIUM THIN FILMS BY CHEMICAL VAPOR DEPOSITION

机译：化学气相沉积制备钒薄膜
- 作者：Masakazu Mukaida;Misaki Ishitsuka;Shigeki Hara;Hiroyuki Suda;Kenji Haraya
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Vanadium;
- Thin Film;
- CVD;
32.PROPERTIES OF MAGNESIA-CALCIUM ZIRCONATE REFRACTORIES PREPARED BY NANO-TECHNOLOGY

机译：纳米技术制备的镁质 - 钙锆耐火材料的性质
- 作者：Min Chen;Caiyun Lu;Jingkun Yu
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Chrome-free refractories;
- Magnesia-calcium zirconate;
- Nano-technology;
- Thermal shock resistance;
- Microstructure;
33.EVOLUTION OF THE TECNORED PROCESS - FROM PILOT PLANT TO INDUSTRIAL SCALE

机译：TeConored过程的演变 - 从飞行员到工业规模
- 作者：Jose Henrique Noldin;Jose Carlos DAbreu;Ian J. Cox
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
34.Bcc screw dislocations: a case study in the application of the Nye tensor to computer simulations of crystal defects

机译：BCC螺丝脱位：纽约张量在晶体缺陷计算机仿真中应用案例研究
- 作者：B. G. Mendis;Y. Mishin;C. S. Hartley
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Nye tensor;
- bcc screw dislocations;
- computer simulation of defects;
35.SYNTHESIS OF BIOMORPHIC TiC FIBERS USING COTTON AS BIO-TEMPLATES

机译：用棉花作为生物模板合成生物晶体纤维
- 作者：Sutham Niyomwas
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Biomorphic TiC Fiber;
- Carbothermal Reduction;
- Sol-gel Process;
- Cotton Fiber;
36.Effect of thermomechanical processing parameters on bake hardening ability of hot rolled dual phase steels

机译：热机械加工参数对热轧双相钢的烘烤硬化能力的影响
- 作者：H. Palkowski;M. Soliman;G. Kugler
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Dual phase steel;
- Hot deformation;
- Bake hardening;
37.REDUCTION OF ELECTRICAL RESISTIVITY OF Cu INTERCONNECTS

机译：Cu互连电阻率的降低
- 作者：Masanori Murakami;Miki Moriyama;Susumu Tsukimoto
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Cu interconnects;
- electrical resistivity;
38.DEFORMATION BEHAVIOR OF HOT ROLLED FERRITE-BAINITE DUAL PHASE STEELS

机译：热轧铁氧体 - 贝氏体双相钢的变形行为
- 作者：A. Saha Podder;R. K. Ray
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Ferrite-Bainite Steel;
- Microstructure;
- TEM;
- Deformation;
39.SPOUT FORMATION IN A GAS-STIRRED LADLE: EXPERIMENTAL RESULTS

机译：在气体搅拌的钢包中形成喷口：实验结果
- 作者：K. Krishnapisharody;G. A. Irons
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Gas Stirring;
- Spout;
- Ladle Metallurgy;
40.NOVEL METAL SILICIDE MATERIALS FOR NANOMETER SCALE CMOS TECHNOLOGY

机译：用于纳米级CMOS技术的新型金属硅化物材料
- 作者：Bing-Zong Li;Yu-Long Jiang;Guo-Ping Ru
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Silicide;
- nickel silicide;
- rare earth silicide;
- CMOS;
41.SPOUT FORMATION IN A GAS-STIRRED LADLE: THE KEY TO PLUME DYNAMICS

机译：在气体搅拌的钢包中喷口形成：羽毛动力学的关键
- 作者：K. Krishnapisharody;G. A. Irons
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Gas Stirring;
- Ladle Metallurgy;
- Bubble Plume;
42.CFD modelling of heat transfer in supersonic nozzles for magnesium production

机译：镁盐超声喷嘴传热的CFD模型
- 作者：Peter Witt;MNH Khan;Geoffrey Brooks
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Supersonic flow;
- Heat transfer;
- CFD modelling;
- Magnesium;
43.CHALLENGES AND PROSPECTS FOR MATERIALS DESIGN

机译：材料设计的挑战与前景
- 作者：David L. McDowell;Farrokh Mistree;Janet K. Allen
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Plasticity;
- Materials Design;
- Microstructure-Property Relations;
44.RESIDUAL STRAINS OF TUBULAR SPECIMENS SUBJECTED TO EITHER TORSION OR TENSION USING NEUTRON DIFFRACTION

机译：使用中子衍射进行扭转或张力的管状试样的残留菌株
- 作者：X. Luo;D. Penumadu;K. An;C. R. Hubbard;F. Tang;H. Choo;P. K. Liaw
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Residual strain;
- Torsion;
- Tension;
- Neutron diffraction;
- Steel;
- Tubular;
45.Effect of Strain Rate on the Dynamic Hardness in fcc Metals through Constitutive Modeling

机译：应变率通过本构型建模对FCC金属动态硬度的影响
- 作者：George Voyiadjis;Amin Almasri
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Dynamic Hardness;
- Strain Rate;
- Constitutive Modeling;
46.Passivation Behaviour of Copper Anodes with Various Chemical Composition

机译：用各种化学成分的铜阳极钝化行为
- 作者：Z. Mubarok;H. Antrekowitsch;G. Mori
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Copper anode;
- Anodic polarisation;
- Current density;
- Passivation;
47.INFLUENCE OF PROCESS PARAMETERS ON THE PHASE TRANSFORMATION AND CONSEQUENT HARDNESS INDUCED BY THE LENS PROCESS

机译：过程参数对镜片过程诱导的相变性的影响及随后的硬度
- 作者：Liang Wang;Sergio Felicelli
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Laser Engineered Net Shaping;
- LENS;
- Phase transformation;
- Hardness;
48.SYNTHESIS OF POROUS COMPOSITES BY SELF-PROPAGATING HIGH TEMPERATURE SYNTHESIS OF TiO_2-B_2O_3-Al SYSTEM

机译：TiO_2-B_2O_3-AL系统自蔓延高温合成多孔复合材料
- 作者：Sutham Niyomwas
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Self-propagating High Temperature Synthesis (SHS);
- Porous Composites;
- TiB_2-Al_2O_3;
49.KINETICS OF THE PRESSURE LEACHING OF SULFIDIZED CHALCOPYRITE IN H_2SO_4-O_2 MEDIA

机译：H_2SO_4-O_2培养基中硫化硫化物的压力浸出的动力学
- 作者：Rafael Padilla;Paola Pavez;Maria C. Ruiz
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Pressure leaching;
- Chalcopyrite sulfidation;
- Autoclave;
- Covellite;
50.Effect of Crystallographic Texture on Mechanical and Corrosion Properties of Zirconium Alloys

机译：晶体纹理对锆合金机械和腐蚀性能的影响
- 作者：K. Linga Murty;I. Charit
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Crystallographic Texture;
- Mechanical Anisotropy;
- Creep;
- Stress Corrosion;
- Hydriding;
51.FINITE ELEMENT MODELING OF DISLOCATION REDUCTIOON IN GaAs SINGLE CRYSTALS GROWN FROM THE VGF PROCESS

机译：VGF工艺生长的GaAs单晶中位错还原的有限元建模
- 作者：X.A. Zhu;C.T. Tsai
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- VGF growth process;
- dislocation density;
- GaAs crystals;
- doping impurity;
52.THE ROLE OF IRON IN THE PRESSURE LEACHING OF WHITE METAL

机译：铁在白色金属压力浸出中的作用
- 作者：Maria Cristina Ruiz;Eduardo Gallardo;Rafael Padilla
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Pressure leaching;
- White metal;
- Acid leaching;
53.COMPARATIVE ANALYSIS OF MICROHARDNESS IN DIRECTIONAL SOLIDIFIED Zn-27wtAl, Zn-27wtAl + CSi AND Zn-27wtAl + Al_2O_3 ALLOYS AND COMPOSITES

机译：定向凝固Zn-27wt％Al，Zn-27wt％Al + CSI和Zn-27wt％Al + Al_2O_3合金和复合材料的微硬度对比分析
- 作者：Alicia Esther Ares;Carlos Enrique Schvezov
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Directional solidification;
- Microhardness test;
- Zn-27wtAl alloys;
- Zn-27wtAl + CSi;
- Zn-27wtAl + Al_2O_3 composites;
54.EXPERIMENTAL STUDY OF CO_2 SEQUESTRATION BY STEELMAKING SLAG

机译：炼钢炉渣CO_2封存的实验研究
- 作者：C. Hank Rawlins;Von L. Richards;Kent D. Peaslee;Simon N. Lekakh
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Steelmaking Slag;
- Carbon Dioxide;
- Sequestration;
55.WIKIPEDIA IN MATERIALS EDUCATION

机译：维基百科在材料教育
- 作者：Adam C. Powell;Arthur E. Morris
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Internet;
- Wikipedia;
- Education;
56.Enhanced Hardenability Dual-Phase Steels and the Limitations Imposed by Subsequent Continuous Hot-Dip Galvanizing

机译：增强的淬透性双相钢和随后连续热浸镀锌施加的限制
- 作者：R. J. Meguerian;J. R. MeDermid
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Reactive wetting;
- Galvanizing;
- Selective oxidation;
- Contact angle measurement;
57.A STUDY OF MONOTONIC AND CYCLIC PROPERTIES OF LENS FABRICATED 4140 AND AISI 4140 STEEL ALLOYS

机译：4140和AISI 4140钢合金晶状体单调和循环性能的研究
- 作者：G. P. Potirniche;J. Middleton;R. Gomez
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- LENS;
- 4140 steel;
- fatigue;
58.TOWARDS INCORPORATING THE KINEMATIC AND KINETIC EFFECTS OF NET BURGER'S VECTOR IN CRYSTAL PLASTICITY

机译：纳入净汉堡载体在晶体可塑性中的运动和动力学效应
- 作者：Jobie M. Gerken;Paul R. Dawson
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Finite element simulation;
- Crystal plasticity;
- Gradient plasticity;
59.THE EFFECT OF SURFACE OR INTERFACE ENERGY ON SIZE DEPENDENT PLASTICITY AT THE MICRON AND SUBMICRON LENGTH SCALES

机译：表面或界面能量对微米和亚微米长度尺寸尺寸依赖性塑性的影响
- 作者：George Z. Voyiadjis;Rashid K. Abu Al-Rub
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Gradient Plasticity;
- Size Effects;
- Thin Films;
60.EARLY STAGES OF SOLIDIFICATION OF ALUMINUM ALLOY 3003 AND ATTENDANT SUBSURFACE MICROSTRUCTURE AS A FUNCTION OF MOLD MATERIAL

机译：铝合金3003凝固的早期阶段和随附地下微观结构作为模具材料的函数
- 作者：P. N. Anyalebechi
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Undulatory shell growth;
- Laps;
- Subsurface microstructure;
- Aluminum alloy;
61.UNDULATORY SOLID SHELL GROWTH OF ALUMINUM ALLOY 3003 AS A FUNCTION OF THE WAVELENGTH OF A GROOVED MOLD SURFACE TOPOGRAPHY

机译：铝合金3003的过度固体壳生长作为沟槽模具表面形貌的波长的函数
- 作者：P. N. Anyalebechi
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Undulatory growth;
- Mold surface topography;
- Aluminum alloy 3003;
62.PRELIMINARY INVESTIGATION INTO THE EFFECT OF GREEN COMPACT MICROSTRUCTURAL DESIGN ON THE DENSITY OF COMBUSTION SYNTHESIZED ALUMINIDE COMPOSITES

机译：初步调查对绿色紧凑型微观结构设计对燃烧合成铝复合材料密度的影响
- 作者：N. Wang;K. Morsi
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Combustion synthesis;
- Intermetallic composites;
- Nickel aluminide;
- Titanium carbide;
- Ball milling;
63.INVERTIBLEMICROSTRUCTURE-PROPERTY-PROCESSING LINKAGES USING SPECTRAL METHODS

机译：使用光谱方法的逆向上节性 - 性能 - 处理联系
- 作者：Marko Knezevic;Hari K. Duvvuru;David Fullwood
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Microstructure design;
- Crystallographic texture;
- Spectral method;
- Property closures;
64.Influence of metallic Ca on the Viscosity of closed-cell aluminum foam

机译：金属Ca对闭孔铝泡沫粘度的影响
- 作者：Guojun Yang;Haijun Yu;Guangchun Yao;Yihan Liu
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Closed-cell aluminum foam;
- Metallic Ca;
- Viscosity;
- Intermetallic compounds;
65.In-situ Analysis of the Direct Reduction Process of Wustite by Solid-state Carbon in TEM

机译：固态碳在TEM中狼狼直接减少过程的原位分析
- 作者：Nobuhiro Ishikawa;Takeshi Aoyagi;Kazuo Furuya;Nayuta Mitsuoka;Takashi Inami
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Solid-state-carbon;
- Iron-oxide;
- Reduction;
- In-situ;
66.Study of Hydrogen-Enriching Gas Reforming in Smelting Reduction Iron-Making Process

机译：富含氢气改性冶炼减少铁制工程的研究
- 作者：Nan WANG;Chen WANG;Yingxia QU;Zongshu ZOU
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Gas reforming;
- Hydrogen-enriching;
- Smelting reduction;
- Static model;
67.Study of Aluminum Foam with Fly Ash Increase Viscosity

机译：粉煤灰铝泡沫的研究增加粘度
- 作者：Wang Yong;Yao Guang-chun;Li Bing
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Aluminium foam;
- Fly ash;
- Increase viscosity;
- Foam melting;
68.Study on Production of Aluminium foam by Recycling of Scrap Aluminium

机译：废铝回收铝泡沫生产研究
- 作者：Wang Yong;Yao Guang-chun;Li Bing
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Aluminium foam;
- Remelting;
- Viscosity increaser;
- Recycling;
69.EFFECT OF Na_4O_7P_2 ON Cu POWDER PREPARATION FROM COPPER OXIDE SLURRIES

机译：Na_4O_7P_2对氧化铜浆料Cu粉制备的影响
- 作者：H. T. Hoang;J. G. Ahn;D. J. Kim;J. R. Lee;C. O. Kim;H. S. Chung
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Copper powder;
- Synthesis;
- Dispersion;
- Sodium pyrophosphate;
70.PROPERTIES OF CARBONIZED CORN STRAW AS THERMAL INSULATING AGENT OF LIQUID METAL

机译：碳化玉米秸秆作为液态金属绝热剂的性质
- 作者：Nan Wang;Min Chen;Yang Wang;Weiwei Leng;Yulong Song;Jian Kang
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Carbonized corn straw;
- Carbonization;
- Thermal insulating agent;
- Rest angle;
- Coefficient of thermal conductivity;
71.Analysis of Defects that Form During Preparation of Pure Al Matrix Foam

机译：纯Al基质泡沫制备过程中形成的缺陷分析
- 作者：Li Bing;Yao Guang-chun;Wang Yong;Luo Hong-jie;Liu Yi-han
- 会议名称：《The Minerals, Metals and materials Society Annual Meeting》 | 2007年
- Pure Al matrix foam;
- Defect;
- Cooling;
- Foamability;