首页>外文会议>其他>International Workshop on New Methods of Damage and Failure Analysis of Structural Parts

International Workshop on New Methods of Damage and Failure Analysis of Structural Parts

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Mechanical and Transport Properties of High Volume UFA Cement Composites

机译：大容量UFA水泥复合材料的机械和运输性能
- 作者：Xingyang He;Jianxiang Huang;Ying Su
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- ultra-fine fly ash;
- Particle size;
- Electrical esistivity;
- Chloride ion permeability;
- Mechanical properties;
2.Enhanced Disintegration of Silicon Particles Due to Their Mutual Impact Caused by Ultrasonic Cavitation Bubbles

机译：由于超声波空化气泡引起的相互影响，因此增强了硅颗粒的崩解
- 作者：J. Bednar;P. Mancik;L. Svoboda
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- Nanoparticles;
- silicon;
- disintegration;
- cavitation;
- milling;
- grinding;
3.New Generation of ODS Alloys

机译：新一代ODS合金
- 作者：Petr Dymacek;Denisa Bartkova;Vlt Hornfk
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- ODS alloys;
- Fe-AI-O;
- Al_2O_3;
- Y_2O_3;
- coarse grain;
- microstructure.;
4.Crystal Orientation Analysis on Stress Corrosion Cracking Facets in Austenitic Stainless Steels

机译：奥氏体不锈钢应力腐蚀开裂刻面的晶体取向分析
- 作者：Ryo Wakinaga;Norimitsu Koga;Osamu Umezawa
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
5.Investigation on Effectiveness and Shape Recovery Ratio of Shape Recovery Self-Healing Plastic

机译：形状恢复自愈塑料效果及形状回收率的研究
- 作者：Hanna Ueshima;Wataru Nakao
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- Polymer-matrix composite;
- Self-healing;
- Shape recovery;
- Creep.;
6.Computation of Composite Strengths by Limit Analysis

机译：限制分析计算复合强度
- 作者：Stanislav Sysala;Radim Blaheta;Alexej Kolcun
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- composite materials;
- compressive strength;
- failure;
- limit analysis;
- CT based FEM;
7.Microstructural Change and Fracture Behavior under Different Heat Exposure Conditions on Thermal Barrier Coatings Deposited on TiAl Intermetallic Compound

机译：在Tial金属间化合物沉积的热阻挡涂层不同热暴露条件下的微观结构变化和断裂行为
- 作者：Makoto Hasegawa;Kotatsu Hirata;Ivo Dlouhy
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- TiAl intermetallic compound;
- thermal barrier coatings;
- heat exposure;
8.Effect of Heat Treatment at (β+γ) Two Phase Region on Fracture Toughness in TiAl Intermetallic Compound

机译：在（β+γ）两相区域对TiA1金属间化合物中断裂韧性的热处理的影响
- 作者：Makoto Hasegawa;Inui Tomohiro;Ivo Dlouhy
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- TiAl intermetallic compound;
- (3 phase precipitation;
- fully lamellar;
- fracture toughness;
9.Residual Life-Time Evaluation Method Using Instrumented Indentation Test

机译：使用仪表压痕试验的残余寿命评估方法
- 作者：Woojoo Kim;Jung-Jun Lee;Jong Ho Won
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
10.Microstructure Evolution in Belt-Casted Strip of Grain Oriented Electrical Steel

机译：谷型电钢带带铸带的微观结构演变
- 作者：Vlastimil Vodarek;Carl-Peter Reip;Anastasia Volodarskaja
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- GOES;
- belt-casted strips;
- Widmanstatten austenite;
- displacive transformation;
- epitaxial ferrite;
- zig-zag grain boundary.;
11.Cyclic Plastic Properties of a Lead Free Solder

机译：无铅焊料的循环塑性特性
- 作者：D. ANTOS;R. HALAMA;M. BARTECKY
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- solder paste;
- Sn-3.5Ag-0.75Cu;
- viscoplaticity;
- fatigue;
12.Fracture Toughness and Charpy Impact Test of MINI Steels and Correlation of Results by Kic-CVN Relationships

机译：迷你钢的断裂韧性和夏比冲击试验及KIC-CVN关系结果的相关性
- 作者：Radek Tomasek;Vratislav Mares;Lukas Horsak
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- Fracture toughness;
- stress intensity factor;
- CVN impact energy;
- sub-size specimen;
- CVN-Kic correlation;
13.Fatigue Crack Growth Thresholds under Negative Stress Ratio for Aluminium Alloys

机译：铝合金负应力比下的疲劳裂纹生长阈值
- 作者：Kunio Hasegawa;Sabuo Usami;BohumirStrnadel
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
14.FE Prediction and Extrapolation of Multiaxial Ratcheting for R7T Steel

机译：用于R7T钢的多轴棘轮FE预测和外推
- 作者：Radim Halama;Jana Bartecka;Petr Gal
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- FEM;
- cyclic creep;
- ratcheting;
- multiaxial fatigue;
- extrapolation;
15.Engineering Version of Local Approach to Fracture and its Application for RPV Lifetime Prediction

机译：局部裂缝方法的工程版及其对RPV寿命预测的应用
- 作者：Sergiy KOTRECHKO;Galyna ZIMINA;Volodymyr REVKA
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- RPV integrity;
- radiation embrittlement;
- Local approach to fracture;
- RPV lifetime;
16.Technological Aspects of Fe-AI-Si Intermetallic Alloy Preparation by Mechanical Alloying

机译：机械合金化Fe-Ai-Si金属间合金制剂的技术方面
- 作者：Petr Hausild;Jaroslav Cech;Veronika Kadlecova
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- intermetallic alloys;
- mechanical alloying;
- SEM;
- X-ray diffraction;
- nanoindentation;
17.Novel Methods for High-Cycle Fatigue Life Determination

机译：高循环疲劳寿命测定的新方法
- 作者：Pavel Konopik;Radek Prochazka;Martin Rund
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
18.Advanced Fiber Reinforced Self-Healing Ceramics for Middle Range Temperature

机译：高级纤维增强的中间温度自愈陶瓷
- 作者：Wataru NAKAO;Taira HAYAKAWA;Tesuro YANASEKO
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- Structural Ceramics;
- Jet engine;
- Creep behavior;
- TiC;
- High temperature oxidation;
19.Stress Distribution in Front of the Crack - Analytical Solutions vs. Numerical. Can the Differences be Minimized?

机译：裂纹 - 分析解决方案前方的应力分布与数值。差异可以最小化吗？
- 作者：Andrzej Neimitz;Sebastian Lipiec
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- stress distribution in front of crack;
- HRR;
- constitutive equation calibration.;
20.Influence of Passivation on Wettability of AISI 304 Steel and its Corrosion Properties in Solution of Sodium Hypochlorite

机译：钝化对次氯酸钠溶液中AISI 304钢润湿性及其腐蚀性能的影响
- 作者：HLINKA Josef;LASEK Stanislav
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- Stainless steel;
- Passivation;
- Corrosion;
- Disinfection;
- Srface treatment;
- Polarization;
- Wettability.;
21.Comparison of Behaviour of Different Variants of Hydrogenated TRIP Steels at Slow Strain Rate Tests

机译：慢性应变速率试验中氢化跳水钢的不同变体的行为比较
- 作者：VANOVA Petra;SOJKA Jaroslav;KONECNA Katerina
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- hydrogen embrittlement;
- TRIP steel;
- slow strain rate test (SSRT);
- retained austenite.;
22.Anomalous Twinning as the Macroscopic Deformation Mechanism for AZ31 Magnesium Alloy

机译：异常孪生作为AZ31镁合金的宏观变形机制
- 作者：Yusuke Onuki;Shigeo Sato
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- magnesium;
- AZ31;
- neutron diffraction;
- texture;
- twinning;
23.Corrosion Properties of ECAP Titanium with Bioactive Oxide Coating in Physiological Solution

机译：生态活性氧化物涂层生态氧化钛在生理溶液中的腐蚀性
- 作者：HLINKA Josef;DLUHOS Ludek;DEDKOVA Katerina
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- Titanium;
- corrosion;
- polarization;
- ECAP;
- anodization;
- titanium dioxide;
- wettability;
24.Architectured Multi-Metallic Structures Prepared by Cold Dynamic Spray Deposition

机译：由冷动态喷涂沉积准备的架构多金属结构
- 作者：Ivo Dlouhy;Lukas Rehorek;Hanus Seiner
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2019年
- Cold gas dynamic spray;
- cold spray;
- additive manufacturing;
- composite;
- architectured materials;
- aluminum alloy;
- iron reinforcement.;
25.Degradation Mechanism of Dissimilar Metal Weld Joints on Steam Generator Collectors WER 440MW Type

机译：蒸汽发生器收集器中不同金属焊接接头的降解机理，蒸汽发生器收集器440MW型
- 作者：Lubomir Junek;Ladislav Jurasek;Zdenek Cancura
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Degradation;
- repair;
- dissimilar metal weld;
- steam generator;
- cracks;
- SCC;
26.Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue

机译：轧制接触疲劳下渗碳SCM420钢损伤与微裂纹的效果
- 作者：Junichi Sanekata;Norimitsu Koga;Osamu Umezawa
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Rolling contact fatigue;
- Carburized steel;
- Microcrack;
- Strain distribution;
- Strain gradient.;
27.Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet

机译：用金属盐涂层铝板用钛的固态扩散键合
- 作者：Shinji Koyama;Nguyen Van Phu
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Surface modification;
- Fracture;
- Bonding strength;
- Titanium;
- Aluminum;
- Formic acid;
28.Non-Destructive Stress Evaluation of Tool Steel Using Scanning Hall Probe Microscope: Effect of Stress Direction on Three Dimensional Magnetic Fields

机译：使用扫描霍尔探针显微镜进行刀具钢的非破坏性应力评估：应力方向对三维磁场的影响
- 作者：Katsuyuki Kida;Ariyasu Yadoiwa;Takuto Yamada
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Magnetic field;
- Scanning hall probe microscopy;
- Tool steel (SKS93;
- JIS);
- Tensile stress;
29.Visualization of Strain Distribution on Deformed Steels Using Digital Image Correlation Method

机译：使用数字图像相关方法可视化变形钢的变形钢菌分布
- 作者：Norimitsu Koga;Osamu Umezawa
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Strain distribution;
- Replica method;
- Digital image correlation.;
30.Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness

机译：增强韧性的TiAl金属间金属间质耐抗裂性
- 作者：Ivo Dlouhy;Ludek Stratil;Hiroshi Fukutomi
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Titanium aluminides;
- Intermetallics;
- Fracture micromechanisms;
- Shear ligament toughening;
- Fracture toughness;
- Crack resistance.;
31.Dynamic Tensile Testing of High Strength Armor Steel Plates

机译：高强度铠焊钢板的动态拉伸试验
- 作者：Radek Tomasek;Vratislav Mares
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Armor steel;
- Tensile test;
- High strain rate;
- Strain rate sensitivity;
- Fractography;
32.Mechanics of Herbert Pendulum Hardness Tester and its Application

机译：赫伯特摆锤硬度测试仪的力学及其应用
- 作者：HALAMA Radim;PODESVA Jin;SUZUKI Ryosuke
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Dynamics;
- Herbert Pendulum;
- Hardness Measurement;
- Rolling Resistance;
33.Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment

机译：压力比对空气环境中奥氏体不锈钢疲劳裂纹生长阈值的影响
- 作者：Kunio Hasegawa;Saburo Usami
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Fatigue crack growth threshold;
- Stress ratio;
- Austenitic stainless steel;
34.Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks

机译：使用S-Version FEM的疲劳裂纹增长模拟：应用于互动地下裂缝
- 作者：Akiyuki Takahashi;Ayaka Suzuki;Masanori Kikuchi
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Fatigue crack growth;
- Subsurface Cracks;
- Proximity rules;
- S-version FEM.;
35.Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy

机译：由纯铝和Al-Mg-Si铝合金组成的功能梯度多孔铝的机械性能
- 作者：Yoshihiko Hangai;Tomoaki Morita;Takao Utsunomiya
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Cellular material;
- Foam;
- Functionally graded material;
- Sintering;
36.Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin

机译：评价方法的开发考虑了粘合剂界面精细结构对包装树脂分层强度的影响
- 作者：Yukichi FURUYAMA;Okihisa HONDA;Qiang YU
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Resin;
- Adhesion reliability;
- Evaluation;
- Fine structure.;
37.Determination of Mechanical Properties of Metallic Materials from Very Small Volumes by Means of Small Punch Test

机译：小冲击试验测定极小体积的金属材料力学性能
- 作者：DYMACEK Petr;DOBES Ferdinand;KLOC Lubos
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Small punch test;
- uniaxial test;
- creep;
- stress relaxation;
38.Subsized Specimens for Fracture Resistance Characterisation Including Transferability Issues

机译：尺寸的裂缝抗性表征标本，包括可转移性问题
- 作者：Ivo Dlouhy;Ludek Stratil;Filip Siska
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- fracture toughness;
- crack resistance curve;
- transferability;
- crack tip constraint;
- subsized specimen;
39.Microstructure Characterization of a Heterogeneous Weld for Welded Rotors

机译：焊接转子异构焊缝的微观结构表征
- 作者：Vlastimil Vodarek;Anastasia Volodarskaja
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- heterogeneous welds;
- PWHT;
- heat affected zone;
- minor phases;
- hardness;
- microstructure stability;
40.Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures

机译：在低温下跳闸钢中保留奥氏体的机械稳定性和变形诱导的转化
- 作者：Takayuki Yamashita;Norimitsu Koga;Osamu Umezawa
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- high strength steel;
- retained austenite;
- mechanical stability;
- transformation induced plasticity.;
41.Analysis on Critical CTOD of Long-Term Used Penstock

机译：长期二手钢板关键CTOD分析
- 作者：KAWAMURA Fumito;MIURA Masazumi;EBARA Ryuichiro
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- CTOD;
- Fracture toughness;
- Long-term used penstock;
- Carbon steel;
- Chemical compositions.;
42.A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys

机译：钛合金高循环疲劳地下裂纹启动模型综述
- 作者：Weibo Li;Osamu Umezawa
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- high-cycle fatigue;
- dwell fatigue;
- subsurface crack initiation;
- microcrack;
- facet.;
43.Reliability Evaluation of Car Power Module Using Electrical-Thermal-Structural Coupled Analysis Based on Field Driving Data

机译：基于现场驾驶数据的电热结构耦合分析汽车电力模块的可靠性评估
- 作者：Shingo Nakayama;Hirotaka Morita;Qiang Yu
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Power Module;
- Junction temperature;
- Miner's Law;
- Fatigue life;
44.Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material

机译：烧结条件对Ag-纳米烧结材料力学性能的影响
- 作者：Shota OKUNO;Qiang YU;Yusuke NAKATA
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Ag-nano;
- SiC;
- Sinter bonding;
- Power device.;
45.Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-lndex

机译：撒托指数概念压缩中的想象最小蠕变率的推断
- 作者：Hiroyuki Sato
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Creep Curve;
- Extrapolation;
- Primary Creep;
- High Temperature Deformation;
46.Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound

机译：大规模转化的断裂韧性和随后热处理的Tial金属间化合物
- 作者：Koji Sakurai;Makoto Hasegawa;Ivo Dlouhy
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- TiAl intermetallic compound;
- massive transformation;
- fracture toughness;
47.Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime

机译：电位动力学偏振和电化学阻抗光谱预测镍钛烯醇支架寿命
- 作者：HLINKA Josef;LASEK Stanislav;BRANZOVSKY Jan
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Potentiodynamic polarization;
- EIS method;
- Nitinol;
- Stent;
- Biomaterial;
48.Combination Criterion for Multiple Laminar Flaws in Steel Components

机译：钢结构中多层漏洞的组合标准
- 作者：Valery Lacroix;Vratislav Mares;Bohumir Strnadel
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Fracture Mechanics;
- Laminar Flaws;
- Quasi-Laminar Flaws;
- Flaw Interaction;
- Flaw Characterization;
- Extended Finite Element Method.;
49.Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO_2 Environment

机译：CO_2环境下高温下15CR不锈钢SCC易感性的影响
- 作者：Toshiyuki Sunaba;Susumu Hirano;Tadao Ishihara
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Stress Corrosion Cracking;
- OCTG;
- Slow Strain Rate Test;
- Chloride ion;
- Hydrogen;
50.Non-Destructive Stress Evaluation of Tool Steel Using Scanning Hall Probe Microscope: Effect of Stress Direction on Three Dimensional Magnetic Fields

机译：使用扫描霍尔探针显微镜的刀具钢的非破坏性应力评估：应力方向对三维磁场的影响
- 作者：Katsuyuki Kida;Ariyasu Yadoiwa;Takuto Yamada
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Magnetic field;
- Scanning hall probe microscopy;
- Tool steel (SKS93;
- JIS);
- Tensile stress;
51.Analysis on Critical CTOD of Long-Term Used Penstock

机译：长期二手乒乓球关键CTOD分析
- 作者：KAWAMURA Fumito;MIURA Masazumi;EBARA Ryuichiro
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- CTOD;
- Fracture toughness;
- Long-term used penstock;
- Carbon steel;
- Chemical compositions.;
52.Subsized Specimens for Fracture Resistance Characterisation Including Transferability Issues

机译：尺寸的裂缝抗性表征标本，包括可转移性问题
- 作者：Ivo Dlouhy;Ludek Stratil;Filip Siska
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- fracture toughness;
- crack resistance curve;
- transferability;
- crack tip constraint;
- subsized specimen;
53.Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin

机译：评价方法的开发考虑了粘合剂界面精细结构对包装树脂分层强度的影响
- 作者：Yukichi FURUYAMA;Okihisa HONDA;Qiang YU
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Resin;
- Adhesion reliability;
- Evaluation;
- Fine structure.;
54.Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy

机译：由纯铝和Al-Mg-Si铝合金组成的功能梯度多孔铝的机械性能
- 作者：Yoshihiko Hangai;Tomoaki Morita;Takao Utsunomiya
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Cellular material;
- Foam;
- Functionally graded material;
- Sintering;
55.Reliability Evaluation of Car Power Module Using Electrical-Thermal-Structural Coupled Analysis Based on Field Driving Data

机译：基于现场驾驶数据的电热 - 热结构耦合分析的汽车电力模块可靠性评估
- 作者：Shingo Nakayama;Hirotaka Morita;Qiang Yu
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Power Module;
- Junction temperature;
- Miner's Law;
- Fatigue life;
56.Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material

机译：烧结条件对Ag-纳米烧结材料力学性能的影响
- 作者：Shota OKUNO;Qiang YU;Yusuke NAKATA
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Ag-nano;
- SiC;
- Sinter bonding;
- Power device.;
57.A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys

机译：钛合金高循环疲劳地下裂纹启动模型综述
- 作者：Weibo Li;Osamu Umezawa
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- high-cycle fatigue;
- dwell fatigue;
- subsurface crack initiation;
- microcrack;
- facet.;
58.Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment

机译：压力比对空气环境中奥氏体不锈钢疲劳裂纹生长阈值的影响
- 作者：Kunio Hasegawa;Saburo Usami
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Fatigue crack growth threshold;
- Stress ratio;
- Austenitic stainless steel;
59.Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures

机译：低温跳闸钢中保留奥氏体的机械稳定性和变形诱导的转化
- 作者：Takayuki Yamashita;Norimitsu Koga;Osamu Umezawa
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- high strength steel;
- retained austenite;
- mechanical stability;
- transformation induced plasticity.;
60.Microstructure Characterization of a Heterogeneous Weld for Welded Rotors

机译：焊接转子异构焊缝的微观结构表征
- 作者：Vlastimil Vodarek;Anastasia Volodarskaja
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- heterogeneous welds;
- PWHT;
- heat affected zone;
- minor phases;
- hardness;
- microstructure stability;
61.Determination of Mechanical Properties of Metallic Materials from Very Small Volumes by Means of Small Punch Test

机译：小冲击试验测定极小体积的金属材料力学性能
- 作者：DYMACEK Petr;DOBES Ferdinand;KLOC Lubos
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Small punch test;
- uniaxial test;
- creep;
- stress relaxation;
62.Visualization of Strain Distribution on Deformed Steels Using Digital Image Correlation Method

机译：使用数字图像相关方法可视化变形钢的应变分布
- 作者：Norimitsu Koga;Osamu Umezawa
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Strain distribution;
- Replica method;
- Digital image correlation.;
63.Mechanics of Herbert Pendulum Hardness Tester and its Application

机译：赫伯特摆锤硬度测试仪的力学及其应用
- 作者：HALAMA Radim;PODESVA Jin;SUZUKI Ryosuke
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Dynamics;
- Herbert Pendulum;
- Hardness Measurement;
- Rolling Resistance;
64.Combination Criterion for Multiple Laminar Flaws in Steel Components

机译：钢结构中多层漏洞的组合标准
- 作者：Valery Lacroix;Vratislav Mares;Bohumir Strnadel
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Fracture Mechanics;
- Laminar Flaws;
- Quasi-Laminar Flaws;
- Flaw Interaction;
- Flaw Characterization;
- Extended Finite Element Method.;
65.Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime

机译：电位动力学和电化学阻抗光谱用于预测Nitinol支架寿命
- 作者：HLINKA Josef;LASEK Stanislav;BRANZOVSKY Jan
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Potentiodynamic polarization;
- EIS method;
- Nitinol;
- Stent;
- Biomaterial;
66.Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO_2 Environment

机译：CO_2环境下高温15CR不锈钢SCC易感性的影响
- 作者：Toshiyuki Sunaba;Susumu Hirano;Tadao Ishihara
- 会议名称：《International Workshop on New Methods of Damage and Failure Analysis of Structural Parts》 | 2017年
- Stress Corrosion Cracking;
- OCTG;
- Slow Strain Rate Test;
- Chloride ion;
- Hydrogen;