首页>外文会议>其他>International Baltic Conference on Engineering Materials and Tribology

International Baltic Conference on Engineering Materials and Tribology

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Tribological parameters of copper-alumina composite

机译：铜 - 氧化铝复合材料的摩擦学参数
- 作者：Pavol Hvizdos;Priit Kulu;Michal Besterci
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- copper;
- A_I2O_3;
- ECAP;
- wear;
- damage mechanisms;
2.Effect of New Super-hard Phases Formation on Properties of Composite Processed by SHS

机译：新型超硬阶段形成对SHS加工复合材料性能的影响
- 作者：Lembit Kommel;Toomas Tamm;Raido Metsvahi
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- SHS;
- CMC;
- c-BC_2N;
- wear;
- friction;
- hardness;
3.Wear behaviour of recycled hard particle reinforced NiCrBSi hardfacings deposited by plasma transferred arc (PTA) process

机译：再循环硬质颗粒的磨损行为增强血浆转移弧（PTA）工艺沉积的NiCRBSI硬焊料
- 作者：A. ZikinDgt;AC2T research GmbH Viktor-Kaplan-Strafie 2 2700 Wiener Neustadt Austria;I. Hussainova;C. KatsichDgt;AC2T research GmbH Viktor-Kaplan-Strafie 2 2700 Wiener Neustadt Austria
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- abrasive wear;
- erosive wear;
- impact wear;
- cermet;
- hardfacing;
4.Impact and Sliding Wear Properties of Single Layer,Multilayer and Nanocomposite Physical Vapour Deposited (PVD) Coatings on the Piasma Nitrided Low-Alloy 42CrMo4 Steel

机译：单层，多层和纳米复合物理气相沉积（PVD）涂层对肝脏氮化低合金42crmo4钢的影响和滑动性能
- 作者：Andrei Surzhenkov;Eron Adoberg;Priit Podra
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- PVD hard coating;
- nitriding;
- low-alloy steel;
- impact wear;
- sliding wear;
5.The Analysis of Abrasive Wear of the Helical Grooved Journal Bearing

机译：螺旋槽轴承磨损磨损分析
- 作者：Jaroslaw Sep;Pawel Pawlus;Andrzej Dzierwa
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- bearing;
- wear;
- oil;
- contamination;
- helical groove;
- surface topography;
6.Densification and Microstructure Development in Zirconia Toughened Hardmetals

机译：氧化锆增韧硬质合金的致密化和微观结构开发
- 作者：Nikolai Voltsihhin;irina Hussainova;M. Erkin Cura
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- Zirconia;
- wear;
- cermet;
- sintering;
- SPS;
- XRD;
7.Preparation of TiB2-TiN and TiN-B powders and their processing

机译：TIB2-TIN和TIN-B粉末的制备及其加工
- 作者：J. Grabis;I. Steins;Dz. Rasmane
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- Titanium nitride-boron composites;
- nanoparticles;
- plasma synthesis;
- spark plasma sintering;
- density;
- microstructures;
8.Characterization of Mechanically Milled Cermet Powders Produced by Disintegrator Technology

机译：用溶解器技术制备机械研磨的金属陶瓷粉末的特征
- 作者：Helmo Kaerdi;Dmitri Goljandin;Priit Kulu
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- cermet;
- powder;
- grindability;
- angularity;
- morphology;
9.Effects of strain and strain rate on the abrasive wear behavior of high manganese austenitic steel

机译：应变和应变率对高锰奥氏体钢磨料磨损行为的影响
- 作者：Matti Lindroos;Veli-Tapani Kuokkala;Arto Lehtovaara
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- High manganese austenitic steel;
- dynamic strain rates;
- abrasion;
10.Experimental Analysis of Steel Plasticity Parameters during Quenching

机译：淬火期间钢塑性参数的实验分析
- 作者：Regita Bendikiene;Rasa Vitkeviciene
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- hardening;
- kinetic plasticity;
- transformation plasticity;
11.Processing and characterization of porous silica-Ag-nanoparticie composites produced by pulsed electric current sintering

机译：脉冲电流烧结产生多孔二氧化硅-AG纳米颗粒复合材料的处理与表征
- 作者：J. Larismaa;O. Soderberg;J. Syren
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- powder metallurgy;
- sintering;
- porous materials;
- electron microscopy;
- X-ray diffraction;
12.Investigation of TiO_2 ceramic surface conductivity using conductive atomic force microscopy

机译：使用导电原子力显微镜研究TiO_2陶瓷表面电导率
- 作者：Kristaps Rubenis;Karlis Kundzins
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- TiO_2;
- ceramic;
- microstructure;
- electrical conductivity;
- atomic force microscopy;
13.Peculiarities of Fatigue Fracture of Steel Hardened by Various Surface Treatments

机译：各种表面处理钢疲劳骨折的特性
- 作者：Antanas Ciuplys;Valdas Kvedaras
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- unalloyed steel;
- fatigue fracture;
- surface hardening;
14.The study of the tribological properties of one-process and two-process textures after vapour blasting and lapping using pin-on-disc tests

机译：汽爆发和焊接焊接试验后单程和双程纹理的摩擦学特性研究
- 作者：Andrzej Dzierwa;Pawel Pawlus;Wieslaw Zelasko
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- pin-on-disk;
- wear;
- friction force;
- two-process surface;
15.Mechanical Properties of Alumina Based Nanocomposites

机译：基于氧化铝的纳米复合材料的力学性能
- 作者：Erkka Kannisto;Erkin Cura;Erkki Levanen
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- Alumina;
- Al_2O_3;
- Nickel;
- Zirconia;
- ZrO_2;
- Nanocomposite;
- Slip casting;
- Pulsed electric current sintering;
- Grain size;
- Hardness;
- Fracture toughness;
16.Structure and properties of recycled aromatic thermoplastic polyester nanocomposites

机译：再生芳族热塑性聚酯纳米复合材料的结构与性能
- 作者：R.Merijs Meri;J.Zicans;T.lvanova
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- polymer nanocomposite;
- recycling;
- structure;
- mechanical properties;
17.Tribological behavior of bronze alloys with solid lubricants

机译：固体润滑剂青铜合金的摩擦学行为
- 作者：Marke Kallio;Petri Vuorinen;Elena Fuentes
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- Bronze alloy;
- solid lubricant;
- sliding bearing;
18.Wear Estimation using 3D Surface Roughness Parameters

机译：使用3D表面粗糙度参数磨损估计
- 作者：Oskars Linins;Juris Krizbergs;Irina Boiko
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- 3D surface roughness;
- wear rate;
- lifetime prediction;
19.Critical radius in the effect of transformation toughening of zirconia doped ceramics and cermets

机译：Zirconia掺杂陶瓷和金属晶体转化增韧效果的临界半径
- 作者：A.B. Freidin;R.A. Filippov;I. Hussainova
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- ceramics;
- transformation toughening;
- zirconia;
- size effect;
20.The Rolling Contact Fatigue of PVD Coated Spur Gears

机译：PVD涂层齿轮的滚动接触疲劳
- 作者：Remigiusz MICHALCZEWSKI;Witold PIEKOSZEWSKI;Marian SZCZEREK
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- rolling contact fatigue;
- coating;
- spur gears;
21.Incorporation of Magnesium ions into Synthetic Hydlroxyapatite: Synthesis and Characterization

机译：将镁离子掺入合成羟基磷灰石：合成和表征
- 作者：Kristine Salma-Ancane;Liga Stipniece;Natalija Borodajenko
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- hydroxyapatite;
- Mg-substituted;
- wet chemical precipitation;
22.DEVELOPMENT OF TiB_2-BASED CERMETS WITH Fe-Mo BINDER

机译：用Fe-Mo粘合剂开发基于TIB_2的CERMETS
- 作者：A. Panasyuk;A. Umanskyi;M. Storozhenko
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- titanium diboride;
- iron-molybdenum alloy;
- cermets;
- metal binder;
- wetting;
- structure;
23.Synthesis of ZrC-TiC Blend by Novel Combination of Sol-gel Method and Carbothermai Reduction

机译：通过溶胶 - 凝胶法和Carbothotmai减少的新组合合成ZrC-TiC混合物
- 作者：Madis Umalas;Valter Reedo;Ants Lohmus
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- Titanium Carbide;
- Zirconium Carbide;
- Sol-gel process;
- Carbothermai reduction;
- fine grained powders.;
24.Mechanical Properties of Kaolin during Heating

机译：加热过程中高岭土的力学性能
- 作者：Igor Stubna;Peter Sin;Anton Trnfk
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- kaolin;
- dehydration;
- dehydroxylation;
- Young's modulus;
- flexural strength;
- firing;
25.UV or AO irradiation effects on the tribological properties of the Talc/GF/Pl composites

机译：UV或AO辐照对滑石/ GF / PL复合材料的摩擦学性质影响
- 作者：Gai Zhao;Qihua Wang;Baixing Liu
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- polyimide;
- ultraviolet;
- atomic oxygen;
- glass fibers;
- talc;
- ribology;
26.Recycling of Al-W-B composite material

机译：al-W-B复合材料的再循环
- 作者：A.Shishkin;V.Mironov;D.Goljandin
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- composite material;
- recycling;
- aluminium-tungsten-boron;
- fibers;
27.Influence of surface morphology on the tribological behavior of diamond- like carbon coating

机译：表面形态对金刚石状碳涂层摩擦学行为的影响
- 作者：V. Podgursky;A. Bogatov;M. Freund
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- diamond-like carbon, surface morphology, friction;
28.Reactive sintering of ZrC-TiC composites

机译：ZRC-TIC复合材料的反应烧结
- 作者：Der-Lianq Yunq;Lauri Kollo;Irina Hussainova
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- vacuum sintering;
- composites;
- cermets;
- carbides;
- refractory materials;
29.Dynamic Compression Behavior and Numerical Modeling of Ti-6246 Alloy at Different Temperatures

机译：不同温度下Ti-6246合金的动态压缩行为和数值模型
- 作者：Dmitri Gomon;Mikko Hokka;Veli-Tapani Kuokkala
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- Ti-6246;
- compression behavior;
- numerical modeling;
- Hopkinson Split Pressure Bar;
30.Friction of Thin Eiectroless NiP and NiP-SiO_2 Coatings on Aluminum Alloy Substrate

机译：薄型射击辊隙和铝合金基质涂层的摩擦力
- 作者：N.K. Myshkin;A.Ya. Grigoriev;D.M. Gutsev
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- eiectroless plating;
- NiP/SiO_2 composite coatings;
- aluminum alloy substrate;
- unlubricated friction;
- wear;
- tribochemical interaction;
31.Investigation of residual stresses and some elastic properties of brush-plated gold and silver galvanic coatings

机译：刷镀金金银电镀涂层残余应力和一些弹性性能研究
- 作者：Harri Lille;Jakub K6o
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
32.Abrasive Wear Resistance of Recycled Hardmetal Reinforced Thick coating

机译：再循环硬质厚涂层的磨料耐磨性
- 作者：Priit Kulu;Riho Tarbe;Arkadi Zikin
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- hardfacing;
- recycled hardmetal;
- PTA;
- HVOF;
- abrasive wear;
33.Influence of pressurized sintering on the performance of TiC-based cermets

机译：加压烧结对TIC基CERMER性能的影响
- 作者：J. KubarseppMH. Klaasen;A. Tsinjarf K. Juhani;L. Koiloeand M. Viljus
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- cermet;
- titanium carbide;
- HIP;
- sinter/HIP;
- adhesive wear;
- strength;
34.The production of high density cast iron tubes by horizontal continuous casting

机译：通过水平连续铸造生产高密度铸铁管
- 作者：Stasys Bockus
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- Grey cast iron;
- Continuous casting;
- Crystallizer;
- Tubes;
- Microstructure;
35.Surface fatigue of Al-metal matrix composites at impact loading

机译：抗冲击载量的铝金属基复合材料的表面疲劳
- 作者：M. Saarna;F. Sergejev;J.K. Gomon
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- MMC;
- surface fatigue;
- impact loading;
- indentation;
- AI6061;
- CNT;
36.Development and testing of materials with reduced wear by fixed abrasive

机译：固定磨料减少磨损材料的开发和测试
- 作者：Vytenis Jankauskas;Remigijus Skirkus
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- Abrasive wear;
- wear into embedded abrasive;
- arc welded Fe-C-Si-Mn-Cr-B surfaces;
- wear resistance;
37.Thermal Stability of PECS-Compacted Cu-Composites

机译：PECS压实Cu - 复合材料的热稳定性
- 作者：Riina Ritasalo;Ulla Kanerva;Simo-Pekka Hannula
- 会议名称：《International Baltic Conference on Engineering Materials and Tribology》 | 2013年
- Cu-composite;
- Spark plasma sintering (SPS);
- Thermal stability;
- Microstructure;
- microhardness;
- CTE;