首页>外文会议>其他>International Conference on 3D Materials Science

International Conference on 3D Materials Science

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.FIB / SEM DETERMINATION OF SUB-SURFACE DAMAGE CAUSED BY MICRO-TRIBOLOGY SCRATCHING OF WC/Co HARDMETAL SAMPLES

机译：FIB / SEM测定由WC / CO硬质合金样本的微摩擦学造成的亚表面损伤
- 作者：M G Gee;K P Mingard;A J Gant
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- FIB-SEM;
- Micro-tribology;
- Abrasion simulation;
- WC/Co Hardmetals;
2.THREE-DIMENSIONAL CHARACTERIZATION OF DISLOCATION- DEFECT INTERACTIONS

机译：错位缺陷相互作用的三维表征
- 作者：Josh Kacher;Grace Liu;IM Robertson
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Dislocations;
- Transmission electron microscopy;
- Electron tomography;
3.CHARACTERIZATION OF CARBONATE ROCKS THROUGH X-RAY MICROTOMOGRAPHY

机译：X射线微谱谱表征碳酸盐岩
- 作者：Debora Pilotto;Sergio Fontoura;Sidnei Paciornik
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- x-ray microtomography;
- carbonate rocks;
- porosity;
- digital microscopy;
4.Fitting Laguerre Tessellations to the Microstructure of Cellular Materials

机译：将LAGUERRE TESSELLATION贴在细胞材料的微观结构
- 作者：Irene Vecchio;Katja Schladitz;Claudia Redenbach
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- weighted Voronoi tessellation;
- geometric model;
- 3D image analysis;
- random closed set;
- sphere packing;
- polymer foam;
5.Distribution of carbide particles and its influence on grain growth of ferrite in Fe-C alloys containing B and V

机译：碳化物颗粒的分布及其对含有B和V含Fe-C合金的铁素体晶粒生长的影响
- 作者：Takafumi Oikawa;Masato Enomoto
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Grain growth;
- Pinning effect;
- Carbide;
- Iron alloy;
6.ENUMERATION OF POLYHEDRA FOR GRAIN GROWTH ANALYSIS

机译：谷物生长分析的多面体枚举
- 作者：Trevor Keller;Barb Cutler;Martin Glicksman
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Polyhedral graphs;
- Grain growth;
- Monte Carlo methods;
7.SEM-BASED ELECTRON TOMOGRAPHY OF TURFS COMPRISED OF LINEAL STRUCTURES

机译：由线性结构组成的草皮的SEM基电子断层扫描
- 作者：O.M. Fakron;D.P. Field
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
8.The Microstructure of RR1000 Nickel-Base Superalloy: The FIB-SEM Dual-Beam Approach

机译：RR1000镍基超合金的微观结构：FIB-SEM双光束方法
- 作者：S A Croxall;M C Hardy;H J Stone
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- FIB-SEM;
- Superalloy;
- 3D;
- Serial Sectioning;
9.FRAGMENTATION OF A STEEL RING UNDER EXPLOSIVE LOADING

机译：爆炸载荷下钢环的碎片
- 作者：Jeremy M. Schreiber;Ivi Smid;Timothy J. Eden
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Fragmentation;
- Finite Element Analysis;
- Johnson-Cook;
- Plasticity;
10.3D Investigation of Cracking Behavior in a Ni Superalloy

机译：NI超合金中裂缝行为的3D调查
- 作者：Andrew Deal;David Rowenhorst;Brandon Laflen
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
11.A Toolbox for Geometric Grain Boundary Characterization

机译：一个工具箱，用于几何晶粒边界表征
- 作者：Krzysztof Glowinski;Adam Morawiec
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Grain boundary;
- interface;
- geometric characterization;
- macroscopic;
- boundary parameters;
12.Graph Cut Approaches for Materials Segmentation Preserving Shape, Appearance, and Topology

机译：图表切割材料分割的方法，保持形状，外观和拓扑
- 作者：Jarrell W. Waggoner;Jeff Simmons;Marc De Graef
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- segmentation;
- propagation;
- shape;
- appearance;
- topology;
- graph cut;
13.IN SITU CHARACTERISATION OF ENTRAINMENT DEFECTS IN LIQUID Al-Si-Mg ALLOY

机译：原位表征液体Al-Si-Mg合金中的夹带缺陷
- 作者：Y. Yue;W. D. Griffiths;J. L. Fife
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Entrainment defects;
- X-ray tomographic microscopy;
- Al alloys.;
14.Ultra Fast Tomography: New Developments for 4D Studies in Material Science

机译：超快速断层扫描：4D材料科学研究的新发展
- 作者：Pierre Lhuissier;Mario Scheel;Marco Di Michiel
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- In situ;
- Continuous tomography;
- Damage evolution;
15.3D MICROSTRUCTURES OF Sb_2Te_3 PRECIPITATES IN PbTe MATRIX WITH PREDICTION BY A WEAK COMPATIBILITY CONDITION

机译：SB_2TE_3的3D微观结构在PBTE矩阵中沉淀，具有弱兼容性条件的预测
- 作者：Xian Chen;Shanshan Cao;Teruyuki Ikeda
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Compatibility;
- Slice-and-view;
- Widmanstatten;
- Precipitates;
- Focused-ion-beam;
16.CALCULATION OF LORENTZ FORCE FIELD OF THE INNOVATION CATHODE CELL

机译：创新阴极电池洛伦兹力场的计算
- 作者：YanLi Jiang;Liang Yu;Naixiang Feng
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Innovation cathode cell;
- ANSYS;
- Lorentz force;
17.MODELING GRAIN BOUNDARY INTERFACES IN PURE NICKEL

机译：纯镍中的晶界界面建模
- 作者：TJ. Turner;P.A. Shade;J.C. Schuren
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Crystal-Plasticity;
- Finite Elements;
- Grain Boundary Deformation;
18.PERSPECTIVES ON MATERIALS SCIENCE IN 3D

机译：关于材料科学的透视
- 作者：D. Juul Jensen
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- 3D techniques;
- 3DXRD;
- recrystallization;
- challenges for 3D science;
- success of 3D science;
19.Quantifying the effect of 3D spatial resolution on the accuracy of microstructural distributions

机译：量化3D空间分辨率对微结构分布精度的影响
- 作者：Gregory Loughnane;Michael Groeber;Michael Uchic
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- microstructure;
- 3D characterization;
- serial sectioning;
- grain size;
20.ON THE THREE-DIMENSIONAL MICROSTRUCTURE OF MARTENSITE IN CARBON STEELS

机译：碳钢马氏体三维微观结构
- 作者：Peter Hedstrom;Albin Stormvinter;Annika Borgenstam
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Martensite;
- Carbon steels;
- Serial sectioning;
- Three-dimensional microstructure;
21.3D CHARACTERIZATION OF RECRYSTALLIZATION BOUNDARIES

机译：结晶边界的3D表征
- 作者：Yubin Zhang;Andrew Godfrey;Nicole MacDonald
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- grain boundary;
- recrystallization;
- aluminum;
- protrusion/retrusion;
22.OPTIMIZING STOCHASTIC PROCESS FOR EFFICIENT MICROSTRUCTURE RECONSTRUCTION

机译：优化随机化工艺，以了解高效微观结构重建
- 作者：Seun Ryu;Dongsheng Li
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- correlation;
- microstructure reconstruction;
- simulated annealing;
- cooling schedule;
- stochastic process;
23.SHAPE ANALYSIS AND THE CLASSIFICATION OF OBJECTS

机译：形状分析和物体的分类
- 作者：F. Brent Neal;John C. Russ
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- shape classification;
- shape descriptors;
- invariant moments;
- harmonic analysis;
- machine vision;
24.CHARACTERIZATION OF PORES AND CRACKS IN UNDERWATER WELDS BY μCT AND DIGITAL OPTICAL MICROSCOPY

机译：μCT和数码光学显微镜孔隙的特征孔隙和水下焊缝的裂缝
- 作者：Sidnei Paciornik;Timo Bernthaler;Valter dos Santos
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- underwater weld;
- μCT;
- porosity;
- cracks;
25.3D ANALYSIS OF PHASE SEPARATION IN FERRITIC STAINLESS STEELS

机译：铁素体不锈钢相分离的3D分析
- 作者：Joakim Odqvist;Jing Zhou;Wei Xiong
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Phase separation;
- Atom Probe Tomography;
- Phase-field modeling;
26.Elastic Behavior of the Percolating Eutectic Structure of a High Pressure Die Cast Magnesium Alloy

机译：高压压铸镁合金渗透渗透结构的弹性行为
- 作者：Bao Zhang;Anumalasetty V. Nagasekhar;Carlos H. Caceres
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
27.MICRO-COMPUTED TOMOGRAPHY, A 3D TOOL FOR NON-DESTRUCTIVE VISUALISATION AND ANALYSIS

机译：微计算机断层扫描，用于非破坏性可视化和分析的3D工具
- 作者：E. Bongaers;R. Van den Bosch
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- micro-computed tomography;
- 3D visualization;
- microstructure;
- porosity;
- rocks;
- geological materials;
28.An Automated Multi-Modal Serial Sectioning System for Characterization of Grain-Scale Microstructures in Engineering Materials

机译：一种自动多模态串行切片系统，用于设计工程材料中晶粒尺度微观结构的特征
- 作者：Michael Uchic;Michael Groeber;Megna Shah
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- serial sectioning;
- 3D microscopy;
- EBSD;
- EDS;
29.3D MICROSTRUCTURAL ARCHITECTURES FOR METAL AND ALLOY COMPONENTS FABRICATED BY 3D PRINTING/ADDITIVE MANUFACTURING TECHNOLOGIES

机译：3D 3D打印/添加剂制造技术制造的金属和合金部件的微结构架构
- 作者：E. Martinez;L. E. Murr;K. N. Amato
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Electron and Laser Beam Melting;
- 3D Microstructures;
- Metals and Alloys;
30.QUATIFICATION OF PRIMARY PHASE UNDERCOOLING OF RAPIDLY SOLIDIFIED DROPLETS WITH 3D MICROTOMOGRAPHY

机译：用3D微微映射快速凝固液滴过冷量的定量
- 作者：A. Ilbagi;P. Delshad Khatibi;H. Henein
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Micro tomography;
- Atmozation;
- Undercooling;
31.Simulation of FIB-SEM Images for Segmentation of Porous Microstructures

机译：多孔微观结构分割的FIB-SEM图像模拟
- 作者：Torben Prill;Katja Schladitz;Christian Wieser
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- scanning electron microscopy;
- materials microstructures;
- Boolean model;
- FIB tomography;
- quantitative analysis;
- Monte-Carlo simulation;
32.NUMERICAL SIMULATIONS OF COMPRESSION PROPERTIES OF SiC/Fe-20Cr CO-CONTINUOUS COMPOSITES

机译：SiC / Fe-20cr共连体复合材料压缩性能的数值模拟
- 作者：Liang Yu;YanLi Jiang;SenKai Lu
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Micromechanical properties;
- Solidwork simulation;
- SiC/Fe-20Cr;
- co-continuous composite.;
33.Handling Misalignment and Drift in 3D EBSD Data Sets

机译：处理3D EBSD数据集中的未对准和漂移
- 作者：Yuchi Huang;Brandon Laflen;Andrew Deal
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
34.DEVELOPMENT OF FULLY AUTOMATED SERIAL-SECTIONING 3D MICROSCOPE AND TOPOLOGICAL APPROACH TO PEARLITE AND DUAL-PHASE MICROSTRUCTURE IN STEELS

机译：钢材全自动串联3D显微镜和岩石矿石及双相微观结构的拓扑方法的研制
- 作者：Yoshitaka Adachi;Naoko Sato;Mayumi Ojima
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Fully automated serial-sectioning microscope;
- topology;
- differential geometry;
- pearlite;
- dual-phase steel;
35.aSUBGRAIN BOUNDARY IDENTIFICATION IN 3D EBSD DATA THROUGH FAST MULTISCALE CLUSTERING

机译：通过快速多尺度聚类在3D EBSD数据中的asubgrain边界标识
- 作者：Brian Soe;Cullen McMahon;David Golay
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Electron Backscatter Diffraction;
- Segmentation;
- 3D EBSD;
- Fast Multiscale Clustering;
- Microbands;
- Low Angle Boundaries;
36.THREE-DIMENSIONAL INVESTIGATION OF VOID GROWTH LEADING TO FRACTURE IN COMMERCIALLY PURE TITANIUM

机译：空隙生长的三维调查导致商业纯钛骨折
- 作者：Marina Pushkareva;Jerome Adrien;Eric Maire
- 会议名称：《International Conference on 3D Materials Science》 | 2013年
- Void growth;
- X-ray tomography;
- In-situ tensile test;
- Fracture;
37.Elastic Behavior of the Percolating Eutectic Structure of a High Pressure Die Cast Magnesium Alloy

机译：高压压铸镁合金渗透渗透结构的弹性行为
- 作者：Bao Zhang;Anumalasetty V. Nagasekhar;Carlos H. Caceres
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
38.THREE-DIMENSIONAL CHARACTERIZATION OF DISLOCATION-DEFECT INTERACTIONS

机译：错位缺陷相互作用的三维特征
- 作者：Josh Kacher;Grace Liu;IM Robertson
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Dislocations;
- Transmission electron microscopy;
- Electron tomography;
39.3D MICROSTRUCTURAL ARCHITECTURES FOR METAL AND ALLOY COMPONENTS FABRICATED BY 3D PRINTING/ADDITIVE MANUFACTURING TECHNOLOGIES

机译：3D 3D打印/添加剂制造技术制造的金属和合金部件的微结构架构
- 作者：E. Martinez;L. E. Murr;K. N. Amato;J. Hernandez;P. W. Shindo;S. M. Gaytan;D. A. Ramirez;F. Medina;R. B. Wicker
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Electron and Laser Beam Melting;
- 3D Microstructures;
- Metals and Alloys;
40.Simulation of FIB-SEM Images for Segmentation of Porous Microstructures

机译：多孔微观结构分割的FIB-SEM图像模拟
- 作者：Torben Prill;Katja Schladitz;Christian Wieser
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Scanning electron microscopy;
- Materials microstructures;
- Boolean model;
- FIB tomography;
- Quantitative analysis;
- Monte-Carlo simulation;
41.Fitting Laguerre Tessellations to the Microstructure of Cellular Materials

机译：将LAGUERRE TESSELLATION贴在细胞材料的微观结构
- 作者：Irene Vecchio;Katja Schladitz;Claudia Redenbach
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Weighted Voronoi tessellation;
- Geometric model;
- 3D image analysis;
- Random closed set;
- Sphere packing;
- Polymer foam;
42.CHARACTERIZATION OF PORES AND CRACKS IN UNDERWATER WELDS BY μCT AND DIGITAL OPTICAL MICROSCOPY

机译：μCT和数码光学显微镜孔隙的特征孔隙和水下焊缝的裂缝
- 作者：Sidnei Paciornik;Timo Bernthaler;Valter dos Santos;Mauricio Monteiro;Marcos Henrique Mauricio;Alexandre Bracarense;Ezequiel Pessoa
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Underwater weld;
- μCT;
- Porosity;
- Cracks;
43.SUBGRAIN BOUNDARY IDENTIFICATION IN 3D EBSD DATA THROUGH FAST MULTISCALE CLUSTERING

机译：快速多尺度聚类3D EBSD数据中的子粒边界标识
- 作者：Brian Soe;Cullen McMahon;David Golay;Zakaria Quadir;Michael Ferry;Lori Bassman
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Electron Backscatter Diffraction;
- Segmentation;
- 3D EBSD;
- Fast Multiscale Clustering;
- Microbands;
- Low Angle Boundaries;
44.SEM-BASED ELECTRON TOMOGRAPHY OF TURFS COMPRISED OF LINEAL STRUCTURES

机译：由线性结构组成的草皮的SEM基电子断层扫描
- 作者：O. M. Fakron;D. P. Field
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
45.QUANTIFICATION OF PRIMARY PHASE UNDERCOOLING OF RAPIDLY SOLIDIFIED DROPLETS WITH 3D MICROTOMOGRAPHY

机译：用3D微微映射快速凝固液滴过冷量的定量
- 作者：A. Ilbagi;P. Delshad Khatibi;H. Henein;Ch. A. Gandin;D. M. Herlach
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Microtomography;
- Atmozation;
- Undercooling;
46.A Toolbox for Geometric Grain Boundary Characterization

机译：一个工具箱，用于几何晶粒边界表征
- 作者：Krzysztof Glowinski;Adam Morawiec
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Grain boundary;
- Interface;
- Geometric characterization;
- Macroscopic boundary parameters;
47.3D MICROSTRUCTURES OF Sb_2Te_3 PRECIPITATES IN PbTe MATRIX WITH PREDICTION BY A WEAK COMPATIBILITY CONDITION

机译：SB_2TE_3的3D微观结构在PBTE矩阵中沉淀，具有弱兼容性条件的预测
- 作者：Xian Chen;Shanshan Cao;Teruyuki Ikeda;Vijay Srivastava;G. Jeffrey Snyder;Dominique Schryvers;Richard D. James
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Compatibility;
- Slice-and-view;
- Widmanstatten;
- Precipitates;
- Focused-ion-beam;
48.Ultra Fast Tomography: New Developments for 4D Studies in Material Science

机译：超快速断层扫描：4D材料科学研究的新发展
- 作者：Pierre Lhuissier;Mario Scheel;Marco Di Michiel;Elodie Boller;Jerome Adrien;Eric Maire;Luc Salvo;Jean-Jacques Blandin;Michel Suery
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- In situ;
- Continuous tomography;
- Damage evolution;
49.3D ANALYSIS OF PHASE SEPARATION IN FERRITIC STAINLESS STEELS

机译：铁素体不锈钢相分离的3D分析
- 作者：Joakim Odqvist;Jing Zhou;Wei Xiong;Peter Hedstrom;Mattias Thuvander;Malin Selleby;John Agren
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Phase separation;
- Atom Probe Tomography;
- Phase-field modeling;
50.3D Investigation of Cracking Behavior in a Ni Superalloy

机译：NI超合金中裂缝行为的3D调查
- 作者：Andrew Deal;David Rowenhorst;Brandon Laflen;Ian Spinelli;Tony Barbuto;Yuchi Huang;Timothy Hanlon
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
51.3D CHARACTERIZATION OF RECRYSTALLIZATION BOUNDARIES

机译：结晶边界的3D表征
- 作者：Yubin Zhang;Andrew Godfrey;Nicole MacDonald;Dorte Juul Jensen
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Grain boundary;
- Recrystallization;
- Aluminum;
- Protrusion/retrusion;
52.MODELING GRAIN BOUNDARY INTERFACES IN PURE NICKEL

机译：纯镍中的晶界界面建模
- 作者：T. J. Turner;P. A. Shade;J. C. Schuren;M. A. Groeber
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Crystal-Plasticity;
- Finite Elements;
- Grain Boundary Deformation;
53.Distribution of carbide particles and its influence on grain growth of ferrite in Fe-C alloys containing B and V

机译：碳化物颗粒的分布及其对含有B和V含Fe-C合金的铁素体晶粒生长的影响
- 作者：Takafumi Oikawa;Masato Enomoto
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Grain growth;
- Pinning effect;
- Carbide;
- Iron alloy;
54.FIB/SEM DETERMINATION OF SUB-SURFACE DAMAGE CAUSED BY MICRO-TRIBOLOGY SCRATCHING OF WC/Co HARDMETAL SAMPLES

机译：FIB / SEM测定由WC / CO硬质合金样本的微摩擦学造成的亚表面损伤
- 作者：M. G. Gee;K. P. Mingard;A. J. Gant;H. G. Jones
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- FIB-SEM;
- Micro-tribology;
- Abrasion simulation;
- WC/Co Hardmetals;
55.THREE-DIMENSIONAL INVESTIGATION OF VOID GROWTH LEADING TO FRACTURE IN COMMERCIALLY PURE TITANIUM

机译：空隙生长的三维调查导致商业纯钛骨折
- 作者：Marina Pushkareva;Jerome Adrien;Eric Maire;Arnaud Weck
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Void growth;
- X-ray tomography;
- In-situ tensile test;
- Fracture;
56.The Microstructure of RR1000 Nickel-Base Superalloy: The FIB-SEM Dual-Beam Approach

机译：RR1000镍基超合金的微观结构：FIB-SEM双光束方法
- 作者：S. A. Croxall;M. C. Hardy;H. J. Stone;P. A. Midgley
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- FIB-SEM;
- Super-alloy;
- 3D;
- Serial Sectioning;
57.FRAGMENTATION OF A STEEL RING UNDER EXPLOSIVE LOADING

机译：爆炸载荷下钢环的碎片
- 作者：Jeremy M. Schreiber;Ivi Smid;Timothy J. Eden
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Fragmentation;
- Finite Element Analysis;
- Johnson-Cook;
- Plasticity;
58.ON THE THREE-DIMENSIONAL MICROSTRUCTURE OF MARTEN SITE IN CARBON STEELS

机译：论碳钢貂网站的三维微观结构
- 作者：Peter Hedstrom;Albin Stormvinter;Annika Borgenstam;Ali Gholinia;Bartlomiej Winiarski;Philip J. Withers;Oskar Karlsson;Joacim Hagstrom
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Martensite;
- Carbon steels;
- Serial sectioning;
- Three-dimensional microstructure;
59.Handling Misalignment and Drift in 3D EBSD Data Sets

机译：处理3D EBSD数据集中的未对准和漂移
- 作者：Yuchi Huang;Brandon Laflen;Andrew Deal;Ian Spinelli;Anthony Barbuto;Timothy Hanlon
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
60.DEVELOPMENT OF FULLY AUTOMATED SERIAL-SECTIONING 3D MICROSCOPE AND TOPOLOGICAL APPROACH TO PEARLITE AND DUAL-PHASE MICROSTRUCTURE IN STEELS

机译：钢材全自动串联3D显微镜和岩石矿石及双相微观结构的拓扑方法的研制
- 作者：Yoshitaka Adachi;Naoko Sato;Mayumi Ojima;Makoto Nakayama;Yuan-Tsung Wang
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Fully automated serial-sectioning microscope;
- Topology;
- Differential geometry;
- Pearlite;
- Dual-phase steel;
61.Graph Cut Approaches for Materials Segmentation Preserving Shape, Appearance, and Topology

机译：图表切割材料分割的方法，保持形状，外观和拓扑
- 作者：Jarrell W. Waggoner;Jeff Simmons;Marc De Graef;Song Wang
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Segmentation;
- Propagation;
- Shape;
- Appearance;
- Topology;
- Graph cut;
62.IN SITU CHARACTERISATION OF ENTRAINMENT DEFECTS IN LIQUID Al-Si-Mg ALLOY

机译：原位表征液体Al-Si-Mg合金中的夹带缺陷
- 作者：Y. Yue;W. D. Griffiths;J. L. Fife;N. R. Green
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Entrainment defects;
- X-ray tomographic microscopy;
- Al alloys;
63.CHARACTERIZATION OF CARBONATE ROCKS THROUGH X-RAY MICROTOMOGRAPHY

机译：X射线微谱谱表征碳酸盐岩
- 作者：Debora Pilotto;Sergio Fontoura;Sidnei Paciornik;Marcos Henrique de Pinho Mauricio
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- X-ray microtomography;
- Carbonate rocks;
- Porosity;
- Digital microscopy;
64.MICRO-COMPUTED TOMOGRAPHY, A 3D TOOL FOR NONDESTRUCTIVE VISUALISATION AND ANALYSIS

机译：微计算机断层扫描，用于非破坏性可视化和分析的3D工具
- 作者：E. Bongaers;R. Van den Bosch
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Micro-computed tomography;
- 3D visualization;
- Microstructure;
- Porosity;
- Rocks;
- Geological materials;
65.OPTIMIZING STOCHASTIC PROCESS FOR EFFICIENT MICROSTRUCTURE RECONSTRUCTION

机译：优化随机化工艺，以了解高效微观结构重建
- 作者：Seun Ryu;Dongsheng Li
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Correlation;
- Microstructure reconstruction;
- Simulated annealing;
- Cooling schedule;
- Stochastic process;
66.CALCULATION OF LORENTZ FORCE FIELD OF THE INNOVATION CATHODE CELL

机译：创新阴极电池洛伦兹力场的计算
- 作者：YanLi Jiang;Liang Yu;Naixiang Feng
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Innovation cathode cell;
- ANSYS;
- Lorentz force;
67.NUMERICAL SIMULATIONS OF COMPRESSION PROPERTIES OF SiC/Fe-20Cr CO-CONTINUOUS COMPOSITES

机译：SiC / Fe-20cr共连体复合材料压缩性能的数值模拟
- 作者：Liang Yu;YanLi Jiang;SenKai Lu;HongQiang Ru;Ming Fang
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Micromechanical properties;
- Solidwork simulation;
- SiC/Fe-20Cr;
- Co-continuous composite;
68.An Automated Multi-Modal Serial Sectioning System for Characterization of Grain-Scale Microstructures in Engineering Materials

机译：一种自动多模态串行切片系统，用于设计工程材料中晶粒尺度微观结构的特征
- 作者：Michael Uchic;Michael Groeber;Megna Shah;Patrick Callahan;Adam Shiveley;Michael Scott;Michael Chapman;Jonathan Spowart
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Serial sectioning;
- 3D microscopy;
- EBSD;
- EDS;
69.SHAPE ANALYSIS AND THE CLASSIFICATION OF OBJECTS

机译：形状分析和物体的分类
- 作者：F. Brent Neal;John C. Russ
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Shape classification;
- Shape descriptors;
- Invariant moments;
- Harmonic analysis;
- Machine vision;
70.ENUMERATION OF POLYHEDRA FOR GRAIN GROWTH ANALYSIS

机译：谷物生长分析的多面体枚举
- 作者：Trevor Keller;Barb Cutler;Martin Glicksman;Dan Lewis
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Polyhedral graphs;
- Grain growth;
- Monte Carlo methods;
71.PERSPECTIVES ON MATERIALS SCIENCE IN 3D

机译：关于材料科学的透视
- 作者：D. Juul Jensen
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- 3D techniques;
- 3DXRD;
- Recrystallization;
- Challenges for 3D science;
- Success of 3D science;
72.Quantifying the effect of 3D spatial resolution on the accuracy of microstructural distributions

机译：量化3D空间分辨率对微结构分布精度的影响
- 作者：Gregory Loughnane;Michael Groeber;Michael Uchic;Matthew Riley;Megna Shah;Raghavan Srinivasan;Ramana Grandhi
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Microstructure;
- 3D characterization;
- Serial sectioning;
- Grain size;
73.IDENTIFICATION AND CHARACTERIZATION OF SUBGRAIN FEATURES IN 3D EBSD DATA

机译：3D EBSD数据中子粒特征的识别与表征
- 作者：Andrew Loeb;Brian Soe;Cullen McMahon;Michael Ferry;Lori Bassman
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Electron Backscatter Diffraction;
- 3D EBSD;
- Segmentation;
- Fast Multiscale Clustering;
- Microbands;
- Low Angle Boundaries;
74.GEOMETRIC AND MECHANICAL MODELING OF FIBER-REINFORCED COMPOSITES

机译：纤维增强复合材料的几何和机械建模
- 作者：Heiko Andra;Martin Gurka;Matthias Kabel;Sebastian Nissle;Claudia Redenbach;Katja Schladitz;Oliver Wirjadi
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Composites;
- Glass fiber-reinforced polymer;
- Image analysis;
- Modeling;
- Simulation;
- Mechanical properties;
75.INFLUENCE OF THE CASTING MICROSTRUCTURE UPON THE TENSILE BEHAVIOUR IN A319 Al-Si ALLOY INVESTIGATED BY XRAY TOMOGRAPHY AND DIGITAL VOLUME CORRELATION

机译：None
- 作者：Long Wang;Nathalie Limodin;Ahmed El Bartali;Julien Rethore;Jean-Francois Witz;Rian Seghir;Eric Charkaluk;Jean-Yves Buffiere
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Aluminum-silicon alloys;
- Digital Volume Correlation;
- X-ray tomography;
76.ATOMIC SCALE AND 3D CHARACTERIZATION OF THE HETEROGENEOUSLY FORMED S (Al_2CuMg) PRECIPITATES AT DISLOCATIONS IN Al-Cu-Mg ALLOY

机译：异均匀形成的S（Al_2cumg）的原子尺度和3D表征在Al-Cu-mg合金的脱位处沉淀出沉淀物
- 作者：Zongqiang Feng;Yanqing Yang;Yanxia Chen
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Aluminum alloy;
- Precipitation;
- Dislocations;
- HRTEM;
- Electron tomography;
77.3D STOCHASTIC MODELING OF MICROSTRUCTURE EVOLUTION DURING THE SOLIDIFICATION OF DENDRITIC ALLOYS

机译：树突式合金凝固过程中微观结构演化的三维随机建模
- 作者：L. Nastac;D. Zhang
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- 3D stochastic mesoscopic modeling;
- Casting;
- Solidification processing;
- Dendritic microstructure evolution;
78.APPLICATION OF DIFFRACTION-AMALGAMATED GRAIN BOUNDARY TRACKING (DAGT) TO FATIGUE CRACK PROPAGATION BEHAVIOR IN HIGH STRENGTH ALUMINUM ALLOY

机译：衍射 - 合并晶界跟踪（DAGT）在高强度铝合金中疲劳裂纹繁殖行为的应用
- 作者：Hui Li;Hiroyoki Toda;Kentaro Uesugi;Akihisa Takeuchi;Yoshio Suzuki;Masakazu Kobayashi
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Fatigue;
- Synchrotron Radiation;
- Crack propagation behavior;
- Grain orientation;
79.EQUILIBRIUM GAP REGULARIZED RADIO-BASED DIGITAL VOLUME CORRELATION

机译：均衡差距正则基于无线电的数字体积相关性
- 作者：T. Taillandier-Thomas;A. Bouterf;H. Leclerc;F. Hild;S. Roux
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Digital Volume Correlation;
- Reconstruction;
- Tomography;
80.ANALYZING MICROSTRUCTURE AND DAMAGE IN CONSTRUCTION MATERIALS WITH 3D MICRO CT

机译：3D微型CT分析施工材料的微观结构和损坏
- 作者：Dietmar Meinel;Andreas Staude;Karsten Ehrig
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- X-ray computed tomography;
- Concrete;
- Asphalt;
- Corrosion;
- Crack detection;
- 3D visualization;
81.3D IMAGE SEGMENTATION AND CYLINDER RECOGNITION FOR COMPOSITE MATERIALS

机译：3D图像分割和复合材料的圆柱识别
- 作者：Amaury Walbron;Sylvain Chupin;Denis Rochais;Romain Abraham;Maitine Bergounioux
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Image Processing;
- Segmentation;
- Markov Random Field;
- Straight Line Detection;
82.METROLOGY OF THREE-DIMENSIONAL TECHNIQUES IN FOCUSED ION BEAM MICROSCOPY

机译：聚焦离子束显微镜中三维技术的计量
- 作者：H. G. Jones;K. P. Mingard;D. C. Cox;B. Winiarski;A. Gholinia
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Focused ion beam;
- 3D reconstruction;
- Slice geometry;
83.INVESTIGATION OF PRE-EXISTING PORES IN CREEP LOADED 9Cr STEEL

机译：调查蠕变9CR钢的预先存在的孔隙
- 作者：Surya Deo Yadav;Joerdis Rosc;Bernhard Sartory;Roland Brunner;Bernhard Sonderegger;Christof Sommitsch;Cecilia Poletti
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Cavity growth;
- P91;
- Martensitic steel;
- Computed tomography;
- Modelling;
84.3D EVALUATION OF INHOMOGENEOUS PLASTIC DEFORMATION OF GRAINS IN ALUMINUM ALLOY

机译：铝合金谷物非均匀塑性变形的3D评价
- 作者：M. Kobayashi;Y. Kawamura
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Inhomogeneous deformation;
- Grain;
- X-ray;
- Microtomography;
85.HIGH RESOLUTION MICRO CT IMAGING AND 3D IMAGE ANALYSIS OF PAPER PRODUCTS

机译：高分辨率微型CT成像和纸制品的3D图像分析
- 作者：Y. Sharma;A. B. Phillion;M. Martinez
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Micro CT;
- Fibre Segmentation;
- Paper microstructure;
86.FINITE ELEMENT SIMULATION AND EXPERIMENTAL ANALYSIS ON FATIGUE BEHAVIOR OF SiC_n/Al CO–CONTINUOUS COMPOSITES

机译：SIC_N / Al连续复合材料疲劳行为的有限元模拟及实验分析
- 作者：Yu Liang;Kun–Peng Yang;Xiao–Dong Nong;Yan–li Jiang;Nan–nao Ge;Ming Fang
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Fatigue behavior;
- Finite Element;
- SiC_n/Al alloy;
- Co–continuous composite;
87.INFLUENCE OF THE LOST FOAM CASTING MICROSTRUCTURE ON LOW CYCLE FATIGUE DAMAGE OF A319 ALUMINUM ALLOY

机译：泡沫铸造微观结构对A319铝合金低循环疲劳损伤的影响
- 作者：Nora Dahdah;Nathalie Limodin;Ahmed El Bartali;Jean-Francois Witz;Rian Seghir;Long Wang;Eric Charkaluk;Jean-Yves Buffiere
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Aluminum-silicon alloys;
- Digital Volume Correlation;
- Synchrotron X-ray tomography;
88.3D MULTISCALE CHARACTERIZATION OF SILICA AEROGELS COMPOSITES

机译：三种多尺度表征二氧化硅气凝胶复合材料
- 作者：Anouk Perret;Genevieve Foray;Lucian Roiban;Karine Masenelli-Varlot;Eric Maire;Jerome Adrien;Bernard Yrieix
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Silica aerogels;
- TEM;
- X-ray Tomography;
- Characterization;
89.LARGE SCALE 3D MULTI-PHASE-FIELD SIMULATION OF MICROSTRUCTURE EVOLUTION USING TSUBAME2.5 GPU-SUPERCOMPUTER

机译：TSUBAME2.5 GPU超级计算机的大型3D多相场模拟微观结构演化
- 作者：Akinori Yamanaka;Masashi Okamoto;Takashi Shimokawabe;Takayuki Aoki
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Multi-Phase-Field Method;
- GPU Computing;
- Microstructure Evolution;
90.MICROSTRUCTURAL DATA FOR MODEL DEVELOPMENT AND VALIDATION

机译：用于模型开发和验证的微结构数据
- 作者：Veronica Livescu;Curt A. Bronkhorst;John F. Bingert
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Microstructure;
- Shock loading;
- Void damage;
- EBSD;
- Damage models;
- Tantalum;
91.DYNAMIC HIGH-TEMPERATURE MONITORING OF MICROWAVE ENERGY ABSORPTION AND HEATING OF MATERIALS WITH ULTRAFAST IN SITU SYNCHROTRON X-RAY TOMOGRAPHIC MICROSCOPY AND POWDER DIFFRACTION TECHNIQUES

机译：微波能量吸收的动态高温监测及利用超快加热材料的原位同步X射线断层显微镜和粉末衍射技术
- 作者：Sebastien Vaucher;Rajmund Mokso;Kotaro Ishizaki;Manuela Stir;Radu Nicula
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
92.HOW MUCH DOES AN INDIVIDUAL GRAIN BOUNDARY JUNCTION TELL US ABOUT THE GROWTH KINETICS OF ITS POLYCRYSTALLINE MICROSTRUCTURE?

机译：单个谷物边界交叉路口告诉我们其多晶微观结构的生长动力学是多少？
- 作者：Dana Zollner;Peter Streitenberger
- 会议名称：《International Conference on 3D Materials Science》 | 2014年
- Grain growth;
- Boundary junctions;
- Individual growth kinetics;
- Analytic theory;
- Potts model simulation;
93.Elastic Behavior of the Percolating Eutectic Structure of a High Pressure Die Cast Magnesium Alloy

机译：高压压铸镁合金渗透渗透结构的弹性行为
- 作者：Bao Zhang;Anumalasetty V. Nagasekhar;Carlos H. Caceres
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
94.IN SITU CHARACTERISATION OF ENTRAINMENT DEFECTS IN LIQUID Al-Si-Mg ALLOY

机译：液体Al-Si-Mg合金中夹带缺陷的原位特征
- 作者：Y. Yue;W. D. Griffiths;J. L. Fife;N. R. Green
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Entrainment defects;
- X-ray tomographic microscopy;
- Al alloys;
95.ON THE THREE-DIMENSIONAL MICROSTRUCTURE OF MARTEN SITE IN CARBON STEELS

机译：论碳钢貂网站的三维微观结构
- 作者：Peter Hedstrom;Albin Stormvinter;Annika Borgenstam;Ali Gholinia;Bartlomiej Winiarski;Philip J. Withers;Oskar Karlsson;Joacim Hagstrom
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Martensite;
- Carbon steels;
- Serial sectioning;
- Three-dimensional microstructure;
96.The Microstructure of RR1000 Nickel-Base Superalloy: The FIB-SEM Dual-Beam Approach

机译：RR1000镍基超合金的微观结构：FIB-SEM双光束方法
- 作者：S. A. Croxall;M. C. Hardy;H. J. Stone;P. A. Midgley
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- FIB-SEM;
- Super-alloy;
- 3D;
- Serial Sectioning;
97.3D ANALYSIS OF PHASE SEPARATION IN FERRITIC STAINLESS STEELS

机译：铁素体不锈钢相分析3D分析
- 作者：Joakim Odqvist;Jing Zhou;Wei Xiong;Peter Hedstrom;Mattias Thuvander;Malin Selleby;John Agren
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Phase separation;
- Atom Probe Tomography;
- Phase-field modeling;
98.3D CHARACTERIZATION OF RECRYSTALLIZATION BOUNDARIES

机译：结晶边界的3D表征
- 作者：Yubin Zhang;Andrew Godfrey;Nicole MacDonald;Dorte Juul Jensen
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Grain boundary;
- Recrystallization;
- Aluminum;
- Protrusion/retrusion;
99.CHARACTERIZATION OF CARBONATE ROCKS THROUGH X-RAY MICROTOMOGRAPHY

机译：X射线微观图谱碳酸盐岩的表征
- 作者：Debora Pilotto;Sergio Fontoura;Sidnei Paciornik;Marcos Henrique de Pinho Mauricio
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- X-ray microtomography;
- Carbonate rocks;
- Porosity;
- Digital microscopy;
100.3D MICROSTRUCTURAL ARCHITECTURES FOR METAL AND ALLOY COMPONENTS FABRICATED BY 3D PRINTING/ADDITIVE MANUFACTURING TECHNOLOGIES

机译：3D用3D打印/添加剂制造技术制造的金属和合金组件的微结构架构
- 作者：E. Martinez;L. E. Murr;K. N. Amato;J. Hernandez;P. W. Shindo;S. M. Gaytan;D. A. Ramirez;F. Medina;R. B. Wicker
- 会议名称：《International Conference on 3D Materials Science》 | 2012年
- Electron and Laser Beam Melting;
- 3D Microstructures;
- Metals and Alloys;