首页>外文会议>其他>International specialty conference on cold-formed steel structure

International specialty conference on cold-formed steel structure

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Towards the design of cold-formed steel foam sandwich columns

机译：朝着冷成型钢泡沫夹层柱设计
- 作者：Szyniszewski S.;Smith B.H.;Zeinoddini V.M.;Hajjar J.F.;Arwade S.R.;Schafer B.W.
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
2.Cold-forming Effect Investigation on Cold-formed Thick-walled Steel Hollow Sections

机译：冷成型厚壁钢中空部分的冷成型效应研究
- 作者：Y.Q. Li;D.H. Wen;L.P. Wang;Z.Y. Shen
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- cold-formed thick-walled hollow sections;
- effect of cold-forming;
- tensile coupon;
- stub column;
3.THE EFFECTS OF WEB HOLES ON WEB CRIPPLING STRENGTH OF COLD-FORMED STEEL CHANNELS UNDER END-TWO-FLANGE LOADING CONDITION

机译：腹轮孔对端两法兰负载条件下冷成型钢通道幅度频率的影响
- 作者：AsrafUzzaman;James B.P Lim;David Nash;Jim Rhodes;Ben Young
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- Cold-formed steel;
- Web crippling;
- Finite element analysis;
- Web openings;
- Channel section;
4.An explicit, dynamic finite element model for the local failure of cold-formed trapezoidal sheeting

机译：冷成型梯形薄片局部故障的明确动态有限元模型
- 作者：H.(Herm) Hofmeyer
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
5.Shear Buckling of Thin-Walled Channel Sections with Complex Stiffened Webs

机译：具有复杂加强纤维网的薄壁通道部分的剪切屈曲
- 作者：Song Hone Pham;Cao Hung Pham;Gregory J Hancock
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
6.Prediction of Joint Temperatures in Shot-Nailed Cold-Formed Steel Sheeting with Finite Element Modelling

机译：用有限元建模预测射击冷成型钢板的关节温度
- 作者：Z. Ma;W. Lu;P. Makelainen;J. Outinen
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
7.ADVANCED DESIGN OPTIMIZATION OF COLD-FORMED STEEL PORTAL FRAME BUILDINGS

机译：冷成型钢门式框架建筑的先进设计优化
- 作者：Duoc T. Phan;James B.P. Lim;Tiku T. Tanyimboh;Wei Sha
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- portal frame;
- cold-formed steel;
- optimization;
- genetic algorithm;
8.Steel Deck Institute Standards for Composite Steel Floor Deck-Slabs

机译：钢铁甲板学院复合钢地板甲板板标准
- 作者：Thomas Sputo
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
9.EFFECTS OF COLD-FORMED STEEL FRAMED GYPSUM PARTITION WALLS ON THE SEISMIC RESPONSE OF A MEDICAL FACILITY

机译：冷成型钢框架石膏隔断墙对医疗设施地震反应的影响
- 作者：Ryan Davies;Rodrigo Retamales;Gilberto Mosqueda;Andre Filiatrault;Don Allen
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
10.Seismic Computational Analysis of CFS-NEES Building

机译：CFS-NEES建设的地震计算分析
- 作者：J. Leng;B.W. Schafer;S. G. Buonopane
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
11.Compressive strength tests and design of cold-formed plain and dimpled steel columns

机译：冷成型和凹陷钢柱的抗压强度试验和设计
- 作者：V.B. Nguyen;C.J. Wang;D.J. Mynors;M.A. English;M.A. Castellucci
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
12.Critical Elastic Shear Buckling Stress Hand Solution for C- and Z-Sections Including Cross-Section Connectivity

机译：用于C和Z部分的临界弹性剪切应力手溶液，包括横截面连接
- 作者：Kevin Aswegan;Cristopher D. Moen
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
13.NUMERICAL AND EXPERIMENTAL INVESTIGATION OF COLD-FORMED STEEL DOUBLE ANGLE MEMBERS UNDER COMPRESSION

机译：压缩下冷成型钢双角构件的数值和实验研究
- 作者：W. F. Maia;L. C. M Vieira;B. W. Schafer;M. Malite
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
14.Using Generalized Beam Theory (GBT) to Assess the Buckling Behavior of Cold-formed Steel Structural Systems

机译：使用广义光束理论（GBT）来评估冷成型钢结构系统的屈曲行为
- 作者：Cilmar Basaglia;Dinar Camotim
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
15.Studies on Bracing Member End Connections for Cold Formed Steel Sections

机译：冷成型钢部件支撑构件端部的研究
- 作者：R.P. Rokade;N. Prasad Rao;R. Balagopal;S.J. Mohan
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- Cold-formed steel;
- Bracing member;
- Shear lag;
- Net section failure;
16.Innovative cross-section shapes for built-up CFS columns. Experimental investigation

机译：用于内置CFS列的创新横截面形状。实验调查
- 作者：Iveta Georgieva;Luc Schueremans;Lincy Pyl;Lucie Vandewalle
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
17.Push Tests on Innovative Shear Connector for Composite Beam with Cold-Formed Steel Section

机译：用冷成型钢部复合梁的创新剪切连接器推动试验
- 作者：S. O. Bamaga;M. M. Tahir;C. S. Tan
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- cold formed steel;
- shear connector;
- ductility;
- strength resistance;
- composite beam;
- push test;
18.Experimental Study on Interaction between Local and Distortional Buckling of High Strength Cold-formed Lipped Channel Columns

机译：高强度冷成型灯柱局部与扭曲屈曲相互作用的实验研究
- 作者：L. Jiang;B. K.He;Y.Q.Li
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- experimental study;
- high strength cold-formed steel columns;
- distortional buckling;
- interaction;
19.BEHAVIOR OF COMPOSITE BEAMS WITH COLD- FORMED STEEL JOISTS AND CONCRETE SLAB

机译：用冷成型钢托梁和混凝土板的复合梁的行为
- 作者：Cheng-Tzu Thomas Hsu;Pedro R. Munoz;Sun Punurai;Yazdan Majdi;Wonsiri Punurai
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
20.Top Arc Seam Weld Shear Strength and Stiffness for Sheet-to-Sheet Connections

机译：顶弧焊缝焊接剪切强度和刚度，用于片材连接
- 作者：R. Nunna;J. Martin;J. Mattingly;P. Bodwell;D. Boltz;K. Cullum;R. LaBoube
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
21.Design Capacity Determination Assisted by Testing Based on LRFD Method

机译：基于LRFD方法测试的设计能力测定
- 作者：Y.Q. Li;L.P. Wang;Z.Y. Shen
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- testing;
- characteristic value;
- design value;
- probability;
- reliability analysis;
- LRFD;
22.Load Distribution in Floor to Wall Connections

机译：在地板上装载到墙壁连接
- 作者：D.M. Fox;D.R. Knill;R.M. Schuster
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
23.Improved reliability determination when testing cold-formed steel components

机译：改进了测试冷成型钢部件时的可靠性确定
- 作者：V.M. Zeinoddini;B.W. Schafer
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- Reliability;
- cold-formed steel;
- load combinations;
- resistance factor.;
24.Seismic Performance of Steel Sheathed Cold-Formed steel shear walls

机译：钢护套冷成型钢剪力墙的地震性能
- 作者：Mehran Zeynalian Dastjerdi;Hamid Reza Ronagh
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
25.Constrained Shape Optimization of Cold-formed Steel Columns

机译：冷成型钢柱的约束形状优化
- 作者：J. Leng;Z. Li;J.K. Guest;B.W. Schafer
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
26.Testing of Connectors for Cold-Formed Steel Construction:Challenges, Recent Innovation, and Future Direction

机译：用于冷成型钢结构的连接器测试：挑战，最近的创新和未来方向
- 作者：Timothy M. Stauffer;Hien Kim Nguyen
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
27.AN EFFICIENT GENETIC ALGORITHM FOR THE DESIGN OPTIMIZATION OF COLD-FORMED STEEL PORTAL FRAME BUILDINGS

机译：一种高效的冷成型钢门式框架建筑设计优化遗传算法
- 作者：Duoc T. Phan;James B.P. Lim;Tiku T. Tanyimboh;Wei Sha
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- portal frame;
- cold-formed steel;
- optimization;
- genetic algorithm;
28.Modal identification of cold-formed steel members in shell finite element models

机译：壳有限元模型中冷成型钢构件的模态识别
- 作者：Z. Li;S. Adany;B. W. Schafer
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- Modal identification;
- constrained finite strip method;
- shell finite element;
- elastic buckling analysis;
- collapse analysis;
29.Steel cold-formed trussed girders with joint eccentricities: improvements on design and performance by numerical and experimental analysis

机译：带有联合偏心的钢冷成型桁架：通过数值和实验分析改进设计和性能
- 作者：Eduardo de M. Batista;Alexandra Landesmann;Juarez M. Franco
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
30.Design of Nonstructural Members in Accordance with AISI S220

机译：根据AISI S220的非结构构件设计
- 作者：R.A. LaBoube;H. Chen;J.W. Larson
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
31.Behavior and Strength of Cold-Formed Steel Framed Shear Walls Sheathed with Composite Panels

机译：用复合板护套的冷成型钢框架剪力墙的行为和强度
- 作者：Cheng Yu;Chao Li
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
32.Behaviour of LiteSteel Beams Subject to Combined Shear and Bending Actions

机译：LiteSteel光束的行为受到组合剪切和弯曲动作
- 作者：P. Keerthan;D. Hughes;M. Mahendran
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
33.Finite Element Analyses of Lipped Chanel Beams with Web Openings in Shear

机译：剪切中腹板开口的锁定香奈儿梁的有限元分析
- 作者：P. Keerthan;M. Mahendran
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- Lipped Channel beams;
- Web openings;
- Shear capacity;
- Cold-formed steel structures;
- Finite element analyses;
34.Active Shear Planes in Block Shear Failure of Bolted Connections

机译：螺栓连接块剪切失效的主动剪切平面
- 作者：Drew D. A. Clements;Lip H. Teh
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
35.Shear Strength of Hollow Flange Channel Beams with Stiffened Web Openings

机译：带有加强幅材开口的空心法兰通道梁的剪切强度
- 作者：P. Keerthan;M. Mahendran
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- LiteSteel beams;
- Web openings;
- Hollow flanges;
- Shear capacity;
- Stiffeners;
- Finite element analyses;
- Cold-formed steel structures.;
36.Direct Strength Design of Metal Building Wall and Roof Systems - Through-Fastened Simple Span Girts and Purlins with Laterally Unbraced Compression Flanges

机译：金属建筑墙和屋顶系统的直接设计 - 通过固定的简单跨度Girts和Purlins，具有横向横向压缩法兰
- 作者：Tian Gao;Cristopher D. Moen
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
37.Slip Modulus of Cold-Formed Steel Members Sheathed with Wood Structural Panels

机译：用木结构板护套的冷成型钢构件的防滑模量
- 作者：A. L. Northcutt;K. W. Kramer;S. F. Stephens
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
38.Investigation of Behavior of Cold-Formed Steel Sheeting Systems in Fire using Finite Element Modeling

机译：用有限元模拟调查火灾中冷钢板系统的行为
- 作者：W. Lu;P. Makelainen;J. Outinen;Z. Ma
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
39.In-plane Shear Lag of Bolted Connections

机译：螺栓连接面内剪切滞后
- 作者：Lip H. Teh;Benoit P. Gilbert
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
40.Definition of Common Conventions for Education of CFS System Design

机译：CFS系统设计教育常见公约的定义
- 作者：Semih Goksel Yildirim
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
- Building industrialisation;
- open building;
- design education of building components;
- common conventions;
41.THE INFLUENCE OF THE ASPECT RATIO ON THE LATERAL RESPONSE OF SHEATHED COLD FORMED STEEL WALLS

机译：纵横比对护套冷成型钢壁横向响应的影响
- 作者：Iuorio O.;Fiorino L.;Macillo V.;Terracciano M.T.
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
42.Analytical Model for Cold-Formed Steel Framed Shear Wall with Steel Sheet Sheathing

机译：具有钢板护套的冷成型钢框剪力墙的分析模型
- 作者：Noritsugu Yanagi;Cheng Yu
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
43.Permanent Stability Bracing of CFS Trusses

机译：CFS桁架的永久稳定性支撑
- 作者：Sowri Rajan P.E.;William L. Babich P.E
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
44.Characterization of cold-formed steel shear wall behavior under cyclic loading for the CFS-NEES building

机译：CFS-NEES建筑物循环载荷下冷成型钢剪切墙行为的表征
- 作者：P. Liu;K.D. Peterman;C. Yu;B.W. Schafer
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
45.Novel cold-formed steel elements for seismic applications

机译：新型冷成型钢筋用于地震应用
- 作者：Alireza Bagheri Sabbagh;Mihail Petkovski;Kypros Pilakoutas;RasoulMirghaderi
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
46.AISI Standards Update

机译：此类标准更新
- 作者：Helen Chen;Roger Brockenbrough;Richard Haws
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
47.DESIGN OF PERFORATED INDUSTRIAL STORAGE RACK COLUMNS FOR DISTORTIONAL BUCKLING

机译：扭曲屈曲穿孔工业储存架的设计
- 作者：Teoman Pekoz;Gilven Kiymaz;Miquel Casafont;Maria MagdalenaPastor;Jordi Bonada
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
48.Self-shape optimisation of cold-formed steel columns

机译：冷成型钢柱的自形优化
- 作者：Benoit. P. Gilbert;Timothee J.-M. Savoyat;Lip H. Teh
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
49.Mechanisms of Block Shear Failure of Bolted Connections

机译：螺栓连接块剪切失效机制
- 作者：Lip H. Teh;Drew D. A. Clements
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
50.Dynamic Time-history analysis on Wind-induced Response of Light-weight Roof System

机译：轻型屋顶系统风诱导响应动态历史分析
- 作者：X.K. Jing;Y.Q. Li;DJ. Gong
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
51.The 1~(ST) Student Competition on Cold-Formed Steel Design

机译：1〜（St）冷成型钢设计的学生竞争
- 作者：Cheng Yu;Cristopher Moen
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
52.Compression-Tension Hysteretic Response of Cold-Formed Steel C-Section Framing Members

机译：冷成型钢C型框架构件的压缩张力滞回响应
- 作者：D. Padilla-Llano;C. D. Moen;M. Eatherton;L. McAnallen;T. Bruce
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
53.Experimental Analysis of Beam-to-upright Connections in Cold-formed Steel Storage Pallet Racks

机译：冷成型钢储物托架架中梁转紧连接的实验分析
- 作者：Tuo Wang;Xianzhong Zhao;Yiyi Chen
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
54.Experimental and Numerical Investigations of High Strength Cold-Formed Lapped Z Purlins under Combined Bending and Shear

机译：组合弯曲和剪切下高强度冷成叠紫蛋白的实验性和数值研究
- 作者：Cao Hung Pham;Annabel F. Davis;Bonney R. Emmett
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
55.Numerical Modelling and Calibration of CFS Framed Shear Walls under Dynamic Loading

机译：动态载荷下CFS框架剪力墙的数值建模与校准
- 作者：I. Shamim;C.A. Rogers
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年
56.Direct Strength Method of Design for Shear of Cold-formed Channels based on a Shear Signature Curve

机译：基于剪切签名曲线的冷成型通道剪切设计直接强度方法
- 作者：Gregory J Hancock;Cao Hung Pham
- 会议名称：《International specialty conference on cold-formed steel structure》 | 2012年