首页>外文会议>其他>Conference on Measurement of Force, Mass and Torque together with HARDMEKO

Conference on Measurement of Force, Mass and Torque together with HARDMEKO

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.PERFORMANCE EVALUATION OF NIS NEW REFERENCE TORQUE STANDARD MACHINE

机译：NIS新参考扭矩标准机的性能评估
- 作者：K. M. Khaled;G. Aggag;A. E. Abuelezz;M. G. Elsherbiny
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Torque machine;
- Comparison;
- Uncertainty;
2.Upgrading of the Rockwell Hardness Primary Standard Machine

机译：罗克韦尔硬度初级标准机的升级
- 作者：He Li;Zhang Feng;Ye Ming;Liu Lianqiu;Wang Beiping
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- New definition for Rockwell hardness;
- Toothed-belt drive;
- Hydraulic transmission;
- Loading monitor system;
3.THE UNCERTAINTY OF PITCH AND YAW RE-EVALUATED FOR PRIMARY ROCKWELL HARDNESS STANDARD SYSTEM IN CMS

机译：CMS中原代罗克韦尔硬度标准系统的音高和横摆重新评估的不确定性
- 作者：Chiu-Hsien;Sheau-shi Pan
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Rockwell hardness;
- 3-axis compact interferometer;
- Indenter axis;
4.IMPROVEMENT OF MEASUREMENT CAPABILITIES OF MULTIPLE MASS STANDARDS OF 1 kg AT NPLI

机译：改善NPLI的多重质量标准的测量能力
- 作者：Goutam Mandal;C. K. Gopan
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Subdivision amp;
- substitution method;
5.COMPARISON OF NANOINDENTATION TESTERS IN TAIWAN

机译：台湾纳米茚地段测试人员的比较
- 作者：Yi-Ching Lin;Ya-Ko Chih
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Nanoindentation;
- Elastic modulus;
- Hardness;
6.IMPLEMENTING A SHOCK-FORCE CALIBRATION SYSTEM USING A VIBRATION EXCITER AND PENDULUM

机译：使用振动激励器和摆锤实现冲击力校准系统
- 作者：Christiaan S. Veldman
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Shock;
- Dynamic force;
- Calibration;
- Impulse hammer;
7.Investigation of Automatic Measurement System on Weighing Instruments

机译：称重仪器自动测量系统的研究
- 作者：WANG Jian;ZHONG Ruilin;CAI Changqing;ZHANG Yue;DING Jingan;YAO Hong
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Weight;
- Type evaluation;
- Repeatability;
- Static temperature;
- Damp heat;
8.10 MN BUILD-UP FORCE STANDARD MACHINE DEVELOPED IN CHINA

机译：10 MN在中国开发的铸造力标准机
- 作者：Li Qingzhong;Yao Jinhui;Xu Hang;Li Haigen;Li Ting yuan
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Build-up force standard machine;
- Build-up measuring system;
- Relative uncertainty;
9.DYNAMIC CALIBRATION OF A FATIGUE TESTING MACHINE ON ORTHOPAEDIC IMPLANTS IN ACCORDANCE WITH THE ISO 4965-1

机译：根据ISO 4965-1的矫形植入物上疲劳试验机的动态校准
- 作者：Rafael Soares de Oliveira;Renato Reis Machado;Andrew Knott;Ieda Vieira Caminha;Carlos Rodrigo Roesler
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- ISO 4965-1;
- Dynamic force calibration;
- Orthopaedic implant;
10.LEEB HARDNESS-CALIBRATION-MACHINE

机译：LEEB硬度 - 校准机
- 作者：Dieter Schwenk
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Leeb-hardness;
- Drop impact test;
- Laser interferometer;
11.AN INVESTIGATION INTO DEPTH SENSNING OF HARDNESS MAPS BY MEANS OF IMAGE PROCESSING TECHNIQUES

机译：通过图像处理技术对硬度映射深度意识的研究
- 作者：Malek Naderi;Kasra Sardashti;Ali Sharbatian;Mehdi Iranmanesh
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Depth sensing;
- Hardness map;
- Image processing;
12.INTERLABORATORY COMPARISON ON ROCKWELL HARDNESS MEASUREMENT IN THAILAND

机译：泰国罗克韦尔硬度测量的互借比较
- 作者：Tassanai Sanponpute;Veera Tulasombut;Rugkanawan Kongkavitool;Apichaya Meesaplak
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Rockwell;
- Interlaboratory comparison;
13.DEVELOPING MULTICOMPONENT FORCE TRANSDUCERS AT INRIM

机译：在Inrim中开发多组分力传感器
- 作者：Sergio Desogus;Alessandro Germak;Fabrizio Mazzoleni;Danilo Quagliotti;Giulio Barbato;Arturo Barbieri;Giacomo Bigolin;Carlo Bin
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Force;
- Multicomponent;
- Calibration;
14.AN INVESTIGATION OF DENSITY DETERMINATION METHODS FOR POROUS MATERIALS, SMALL SAMPLES AND PARTICULATES

机译：多孔材料，小样品和颗粒密度测定方法的研究
- 作者：Stuart Davidson;Michael Perkin
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
15.APPLICATION OF CONTINUOUS MULTIPLE LOADING WITH SPHERICALTIP NANOINDENTATION TO MECHANICAL PROPERTY EVALUATIONS OF INDUSTRIAL MATERIALS

机译：连续多重载入与球面纳米狭窄对工业材料力学性能评估的应用
- 作者：Ikuo Ihara;Takanobu Matsumoto;Yoshikazu Yajima;Jun-ichi Uegaki;Yoshikazu Shima
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Spherical indentation;
- Stress-strain curve;
- Continuous multiple loading;
16.DYNAMIC BEHAVIOR OF CHECKWEIGHER WITH ELECTROMAGNETIC FORCE COMPENSATION (2ND REPORT)

机译：电磁力补偿检测器的动态行为（第2报告）
- 作者：Y. Yamakawa;T. Yamazaki
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Mass measurement;
- Electro-magnetic force compensation system;
- Dynamic behavior;
17.MECHANICAL DESIGN OF NIS NEW REFERENCE TORQUE STANDARD MACHINE

机译：NIS新型参考扭矩标准机械设计
- 作者：K. M. Khaled;G. Aggag;A. E. Abuelezz;M. G. Elsherbiny
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Torque;
- Torque standard machine;
- Traceability;
18.STUDY ON A SIMPLIFIED IMPLEMENTATION OF HOMODYNE TIA METHOD FOR LOW FREQUENCY PRIMARY VIBRATION CALIBRATION

机译：低频初级振动校准的岩体TIA方法简化实现研究
- 作者：Qiao Sun;Chenguang Cai
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Primary vibration calibration;
- Time interval analysis method;
- Homodyne interferometry;
19.POSSIBILITY OF IMPROVING CORRECTIONS FOR ROCKWELL HARDNESS VALUE OBTAINED ON CONVEX CYLINDRICAL SURFACES

机译：改善在凸圆柱表面上获得的罗克韦尔硬度值校正的可能性
- 作者：Tassanai Sanponpute;Nitiwat Sasom;Apichaya Meespalak
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Rockwell hardness;
- Corrections;
- Convex cylindrical;
20.EXPERIMENTAL INVESTIGATION INTO THE EFFECTS OF EXCITER MOTIONS ON THE PRIMARY CALIBRATION OF SINGLE-ENDED ACCELEROMETER

机译：励磁动作对单端加速度计初步校准的实验研究
- 作者：C. Hirunyapruk;P. Rattanangkul;B. Thummawut;V. Plangsangmas
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Shaker motions;
- Primary vibration calibration;
- Single-ended accelerometer;
21.CREEP MEASUREMENT IN REFERENCE TORQUE CALIBRATION MACHINES

机译：参考扭矩校准机中的蠕变测量
- 作者：Andreas Bruege
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Torque transducer;
- Creep;
- Reference calibration machine;
22.Correlation between Nanoindentation Test Result and Vickers Hardness

机译：纳米茚地段测试结果与维氏硬度之间的相关性
- 作者：Takeshi Sawa
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Indentation hardness;
- Vickers hardness;
- Indentation work;
23.HIGH PRECISSION OPTICAL POSITION SENSOR FOR ELECTROMAGNETIC FORCE COMPENSATED BALANCES

机译：用于电磁力补偿余额的高精度光学位置传感器
- 作者：Christian Diethold;Thomas Froehlich;Falko Hilbrunner;Gerd Jaeger
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Position sensor;
- Zero point detection;
- Balance with electromagnetic force compensation;
24.3-D SURFACE ROUGHNESS PROFILE OF 316-STAINLESS STEEL USING VERTICAL SCANNING INTERFEROMETRY WITH A SUPERLUMINESCENT DIODE

机译：316 - 不锈钢的3-D表面粗糙度曲线，使用垂直扫描干涉测量法具有高级发光二极管
- 作者：Wirun Laopornpichayanuwat;Jakkapol Visessamit;Montian Tianprateep
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Roughness;
- Vertical scanning interferometry (VSI);
- Continuous wavelet transform (CWT);
25.Research on measuring magnetism of weight using gaussmeter

机译：高斯计测量重量磁性的研究
- 作者：Zhong Ruilin;Wang Jian;Yao Hong;Ding jinan;Cai Changqin;Zhang Yue
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Magnetism;
- Weight;
- Gaussmeter;
26.THE SET UP OF PRIMARY CALIBRATION SYSTEM FOR SHOCK ACCELERATION IN NML

机译：NML中震动加速度的主要校准系统的设置
- 作者：Yu-Chung Huang;Jiun-Kai Chen;Hsin-Chia Ho;Chung-Sheng Tu;Chao-Jung Chen
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Primary shock calibration system;
- Airborne anvil;
27.RADIAL SHEAR BEAMS USED AS HIGH PRECISION TRANSFERE TRANSDUCERS

机译：用作高精度传感器的径向剪切梁
- 作者：Thomas Kleckers
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Reference force transducer;
- Radial shear beams;
- Force calibration;
28.SOME PROBLEMS USING REFERENCE RUBBER BLOCKS AS A STANDARD

机译：使用参考橡胶块作为标准的一些问题
- 作者：Anton Stibler;Febo Menelao;Konrad Herrmann
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Rubber hardness testers;
- Rubber hardness blocks;
- Calibrations;
29.EFFECT OF DIFFERENT LOADING SCHEMES ON CREEP AND CREEP RECOVERY FOR FORCE MEASUREMENTS

机译：不同装载方案对力测量蠕变和蠕变恢复的影响
- 作者：Ebtisam H. Hasan;Guenther Haucke;Rolf Kumme
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Creep;
- Creep recovery;
- Hysteresis;
- Force transducer;
30.THE 250 KILONEWTON PRIMARY SHOCK FORCE CALIBRATION DEVICE AT PTB

机译：PTB的250克尼邮里初级冲击力校准装置
- 作者：Michael Kobusch;Thomas Bruns;Leonard Klaus;Michael Mueller
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Shock force calibration;
- Impact;
- Laser-Doppler interferometry;
31.RESEARCH OF NEW INDUSTRIAL HARDNESS TESTING USING 'EQUIVALENT INDENTATION DEPTH △h_e'

机译：使用“等效缩进深度△H_E”的新工业硬度测试研究
- 作者：Takashi Yamamoto;Masayuki Yamamoto;Kensuke Miyahara
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
32.Research on Air density Measurement for measuring weights

机译：测量重量的空气密度测量研究
- 作者：WANG Xiao-lei;WANG Jian;ZHONG Rui-lin;ZHANG Yue;CAI Chang-qing;YAO Hong;DING Jing-an
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Air density;
- Weight;
- Air buoyancy correction;
- CIPM-2007 equation;
33.VIBRATION EFFECT ON VICKERS HARDNESS MEASUREMENT

机译：维氏硬度测量的振动效应
- 作者：Tassanai Sanponpute;Apichaya Meesaplak
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Vibration effect;
- Vickers hardness;
34.INTERLABORATORY COMPARISON OF FORCE MEASUREMENT IN THAILAND

机译：泰国力量测量的互借性比较
- 作者：Kittipong Chaemthet;Chanchai Amornsakun;Sumet Heamawatanachai
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Force comparator machine;
- Force transducer;
- Interlaboratory comparison;
35.EVALUATION OF ACTUAL SENSITIVITY LIMIT IN A 10 N·m DEAD WEIGHT TORQUE STANDARD MACHINE AND STABILITY OF A NEW 1 N·m TORQUE TRANSDUCER

机译：10 N·M耐死扭矩标准机中的实际灵敏度限制的评估及新的1N·M扭矩换能器的稳定性
- 作者：Atsuhiro Nishino;Koji Ogushi;Kazunaga Ueda
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Torque standard;
- Uncertainty;
- Sensitivity;
36.EXAMPLES AND PROPOSED SOLUTIONS REGARDING THE GROWING IMPORTANCE OF CALIBRATION OF HIGH NOMINAL FORCES

机译：关于高名义力校准的越来越重要的示例和提出的解决方案
- 作者：A. Schaefer
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Reference force transducers;
- Extrapolation;
- Built-up system;
37.MULTICOMPONENT-TRANSDUCERS: DEFINITION, CONSTRUCTION TYPES AND CALIBRATION CONSIDERATIONS

机译：多组分传感器：定义，施工类型和校准考虑
- 作者：Daniel Schwind
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Force;
- Moment;
- Multicomponent;
38.UNCERTAINTY CONTRIBUTION IN THE CASE OF COSINE FUNCTION WITH ZERO ESTIMATE - A PROPOSAL

机译：在零估计的余弦函数的情况下的不确定性贡献 - 提案
- 作者：Dirk Roeske
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Uncertainty;
- Cosine function;
- Zero estimate;
39.INFLUENCE OF SPECIFIC PARAMETERS ON A HAND-OPERATED TORQUE STANDARD MACHINE

机译：特定参数对手动扭矩标准机的影响
- 作者：Rafael S. Oliveira;Rodrigo F. Guilherme;Luiz C. Cabral
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Torque standards;
- Hand-operated machines;
- Torque calibration;
40.CALIBRATION AND APPLICATION OF A PRESSURE MAPPING SENSOR

机译：压力映射传感器的校准和应用
- 作者：Octavian Postolache;Pedro Silva Girao
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Pressure mapping sensors;
- Ballistocardiography;
- Calibration;
41.OPTIMUM DIMENSIONS OF DWM LOADING FRAME

机译：DWM装载框架的最佳尺寸
- 作者：A. Abu-Sinna;Yon-Kyu Park;Dae-Im Kang;Min-Seok Kim
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Deadweight Machine;
- Loading Frame;
- Loadcell;
- FEM;
42.ESTABLISHED THE DENSITY STANDARD OF NATIONAL INSTITUTE OF METROLOGY (THAILAND)

机译：建立了国家计量研究所的密度标准（泰国）
- 作者：Tosapon Pangviwate;Monchai Mitaree;Rungsiya Sukhon;Wirun Laopornpichayanuwat;Veera Tulasombut
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Density;
- Density hydrometer;
- Hydrostatic weighing;
- Silicon standard;
43.THE INFLUENCE OF THE TIME EXTENSION ON THE PRELIMINARY TEST FORCE IN ROCKWELL HARDNESS MEASUREMENTS

机译：时间延伸对罗克韦尔硬度测量初步试验的影响
- 作者：Renato Reis Machado;Jorge Trota Filho;Sergio Pinheiro de Oliveira;Islei Domingues da Silva;Bianca da C. O. Muniz
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- ISO 6508 revision;
- Hardness testing;
- Preliminary test force;
44.A ROUND ROBIN TEST OF SHOCK ACCELERATION CALIBRATION AMONG TWO PRIVATE LABORATORIES AND NMIJ

机译：两个私人实验室和NMIJ之间的冲击加速校准的循环罗宾测试
- 作者：Hideaki Nozato;Takashi Usuda;Akihiro Oota;Seiji Okamoto;Ken Yamamoto;Hiroshi Unejima;Kazuaki Kawaguchi;Ishigami Tamio
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Shock acceleration;
- Pick-up;
- Accelerometer;
- Round robin;
45.STUDY ON METHODS FOR MEASURING VICKERS INDENTATIONS

机译：测量维氏缩进的方法研究
- 作者：Takashi Yamamoto;Masayuki Yamamoto;Koichiro Hattori
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Vickers hardness test;
- Numerical aperture;
46.CALIBRATION OF SECONDARY STANDARD LEAKS BY MEANS OF MASS COMPARISON

机译：通过质量比较校准二级标准泄漏
- 作者：Dominik Prazak;Jaroslav Zuda;Ladislav Peksa
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Atmospheric leaks;
- Refrigerant leaks;
47.CONSTRUCTION OF A STANDARD FORCE MACHINE FOR THE RANGE OF 100 μN - 200 mN

机译：在100μN - 200mN的范围内的标准力机的构造
- 作者：Christian Schlegel;Oliver Slanina;Guenther Haucke;Rolf Kumme
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Force standard machine;
- Small forces;
- Force transducer;
- ISO 376;
- Electromagnetically compensated balance;
48.VACUUM TRANSFER SYSTEM FOR LOADING THE SARTORIUS PROTOTYPE MASS COMPARATOR CCL1007

机译：用于装载Sartorius原型质量比较器CCL1007的真空转移系统
- 作者：Thomas Froehlich;Thomas Fehling;Detlef Heydenbluth;Matthias Geyer;Ralf Schueler
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
49.REFERENCE VIBRATION CALIBRATION EQUIPMENT AT LNE: INFLUENCE OF METHODS AND EXCITERS

机译：LNE参考振动校准设备：方法和兴奋剂的影响
- 作者：Claire BARTOLI;Philippe AVERLANT;Cedric de Waubert
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Accelerometer;
- Vibration;
- Calibration;
50.CHARACTERISTIC QUALITY PARAMETERS OF MEASUREMENT - VERIFICATION AND CALIBRATION OF MATERIAL TESTING MACHINES

机译：测量特征质量参数 - 材料试验机的验证与校准
- 作者：Dieter Schwenk;Andreas Subaric-Leitis
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Span;
- Standard deviation;
- Material testing machines;
51.NON AUTOMATIC WEIGHBRIDGES SCALES INTERCOMPARISON IN SPAIN: A DIFFERENT APPROACH

机译：非自动称重秤在西班牙中缩放依据：一种不同的方法
- 作者：Nieves Medina;Jose Angel Robles
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Weighbridges scale;
- Comparison;
52.The Effect of High Transverse Inputs on Accelerometer Calibration

机译：高横向输入对加速度计校准的影响
- 作者：Richard W. Bono;Eric J. Seller;Mark I. Schiefer
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Calibration;
- Transverse;
- Accelerometer;
53.TRACEABLE CALIBRATION OF ELECTRICAL COMPONENTS REGARDING AMPLITUDE AND PHASE DISPLACEMENT IN THE FREQUENCY RANGE OF 0.15 HZ TO 12.5 (50) KHZ

机译：关于频率范围为0.15Hz至12.5（50）kHz的幅度和相位容量的电气元件的可追踪校准
- 作者：Holger Nicklich;Uwe Buehn;Heiko Deierlein;Frank Schulz;Michael Mende
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Phase measurement;
- Voltage measurement;
- Traceability;
54.CURRENT STATUS OF REBOUND HARDNESS TEST BLOCKS IN JAPAN AND OUTLOOK

机译：日本反弹硬度测试块的现状及展望
- 作者：Takashi Yamamoto;Masayuki Yamamoto;Satoshi Takagi
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
55.RESULTS OF THE BRINELL HARDNESS PROFICIENCY TEST AND THE IMPORTANCE OF STANDARD INDENTATION

机译：Brinell硬度能力测试的结果和标准压痕的重要性
- 作者：Gunwoong Bahng;Nae Hyung Tak;Jong Soo Chung;Sang Bo Bae
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Hardness;
- Reference indentation;
- Brinell;
56.ANALYSIS OF INDENTER GEOMETRY VERIFICATION DATA BY MEANS OF THE REGRESSION PLANE FITTING

机译：通过回归平面拟合分析压痕几何验证数据
- 作者：Satoshi Takagi;Tatsuya Ishibashi
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Instrumented indentation;
- Direct verification of indenter;
- Atomic force microscope;
57.INVESTIGATION OF TEST FORCE OF REFERENCE HARDNESS STANDARD OF CROATIA

机译：克罗地亚参考硬度标准试验力调查
- 作者：Zeljko Alar;Mladen Franz;Tamara Aleksandrov
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Reference hardness standard;
- Force;
- Measurement uncertainty;
58.A NEW SYSTEM FOR PRIMARY INTERFEROMETRIC CALIBRATION OF VIBRATION TRANSDUCERS AT LOW FREQUENCIES

机译：低频率振动传感器初级干涉校准的新系统
- 作者：Gustavo P. Ripper;Caue D. Ferreira;Dimas B. Teixeira;Ronaldo S. Dias;Giancarlo B. Micheli
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Vibration;
- Acceleration;
- Metrology;
59.OPTOELECTRONIC PHASE DELAY MEASUREMENT FOR A MODIFIED MICHELSON INTERFEROMETER

机译：改进的迈克尔森干涉仪的光电相延迟测量
- 作者：Thomas Bruns;Frank Blume;Kai Baaske;Mark Bieler
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Phase response;
- Laser interferometer;
- Response time;
60.COMPACT MICRO FORCE GENERATOR WITH TANDEM LEAF SPRING AND VCA ON MICRO ROBOT FOR MICRO HARDNESS AND STIFFNESS TEST

机译：具有串联叶弹簧和VCA的紧凑型微型力发生器，微机器人用于微型硬度和刚度测试
- 作者：Montree Pakkratoke;Natchapon Luekiatphaisan;Hisayuki Aoyama;Tassanai Saneponpute
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Voice coil actuator;
- Tandem leaf spring mechanism;
- Strain gauge;
- Inchworm micro robot;
- Micro indenter;
61.IMPROVED METHODS FOR ACCURATELY CALIBRATING THE 3D GEOMETRIES OF ROCKWELL INDENTERS

机译：用于准确校准罗克韦尔·依存的3D几何形状的改进方法
- 作者：Gaoliang Dai;Jian Zhao;Febo Menelao;Konrad Herrmann;Uwe Brand
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Rockwell indentation;
- Metrological stylus profilometer;
- Correction;
62.TRACEABILITY OF INDUSTRIAL ROCKWELL, BRINELL, VICKERS AND KNOOP HARDNESS MEASUREMENTS

机译：工业罗克韦尔的可追溯性，Brinell，Vickers和Knoop硬度测量
- 作者：Samuel Low;Alessandro Germak;Konrad Herrmann
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Hardness;
- Traceability;
- Uncertainty;
63.PARAMETRIC MECHATRONIC MODEL OF A LOAD CELL WITH ELECTROMAGNETIC FORCE COMPENSATION

机译：具有电磁力补偿的负载电池的参数化机制模型
- 作者：Hanna Weis;Falko Hilbrunner;Thomas Froehlich;Gerd Jaeger
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Simulation of complex mechatronic systems;
- Optimisation of parameters;
- Force measurement;
64.COMPARISON OF DIFFERENT LOAD CHANGERS FOR EMFC-BALANCES

机译：EMFC - 平衡不同负载变频器的比较
- 作者：F. Hilbrunner;H. Weis;T. Froehlich;G. Jaeger
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Check weigher;
- Measurement time;
- Load changer;
65.BEHAVIOR OF PURE TORQUE AND TORQUE WITH CROSS FORCE MEASUREMENT OF TORQUE TRANSDUCER

机译：扭矩和扭矩测量扭矩传感器的扭矩和扭矩的行为
- 作者：Tassanai Sanponpute;Chokchai Wattong;Nittaya Arksornarong
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Pure torque;
- Torque with cross force;
- Load lateral force;
66.IMPROVEMENT OF THE RELIZATION OF 500 KN FORCE BY DEADWEIGHT FORCE MACHINE AT NIMT

机译：在尼姆特在尼姆特中的重量力机器实现500 kn力的改进
- 作者：Kittipong Chaemthet;Chanchai Amornsakul;Veera tulasombut;Sumet Heamawatanachai
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Deadweight force machine;
- DWM;
- Uncertainty;
67.A NEW FACILITY FOR CONTINUOUS AND DYNAMIC FORCE CALIBRATION WITH FORCES UP TO 100 KN

机译：一种用于连续和动态力校准的新设施，力量高达100 kN
- 作者：Rolf Kumme;Bernd Gloeckner;Christian Schlegel
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Dynamic force calibration;
- Dynamic reference transducer;
68.IMPROVEMENTS OF THE NATIONAL HARDNESS PRIMARY STANDARD MACHINE ON VICKERS SCALES

机译：Vickers秤上的国家硬度主要标准机的改进
- 作者：Edward Aslanyan;Peter Krasowski;Aleksandr Doynikov;Victor Pivovarov
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Hardness primary standard machine;
- Vickers scales COOMET regional key comparison;
69.INFLUENCE OF AERODYNAMIC EFFECTS IN DEADWEIGHT MACHINES

机译：空气动力学效应对多重机器的影响
- 作者：Danilo Quagliotti;Alessandro Germak;Fabrizio Mazzoleni
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Aerodynamics effects;
- Force;
70.GEOMETRICAL MEASUREMENTS OF NIST SRM ROCKWELL HARDNESS DIAMOND INDENTERS

机译：NIST SRM Rockwell硬度金刚石压头的几何测量
- 作者：J. Song;S. Low;A. Zheng;P. Gu
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Rockwell C hardness;
- Rockwell diamond indenter;
- Standard reference materia;
71.Development of Primary Vickers Hardness Testing Machine

机译：主要维克斯硬度试验机的开发
- 作者：F. Menalo;G. Mohamed;M. I. Mohamed;A. A. Abuelezz;M. Adly;A. A. Khatab
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Vickers hardness;
- Hardness standard machine;
72.DEVELOPMENT OF NANOINDENTATION TESTER WITH A RAMAN SPECTROSCOPY INTERFACE FOR MATERIAL CHARACTERIZATION

机译：具有拉曼光谱界面的纳米压钻测试仪进行材料特征
- 作者：Masayuki Fujitsuka;Makoto Yamaguchi;Shigeru Ueno;Ichiro Miura;Shigeo Katayama
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Raman spectroscopy;
- Residual stress;
- Surface observation;
73.ACTIVITY OF INTERLABORATORY COMPARISON ON WEIGHT MEASUREMENT IN THAILAND

机译：泰国重量测量的互上比较的活动
- 作者：Rungsiya Sukhon;Wirun Laopornpichayanuwat;Monchai Mitaree;Tossapon Pangviwat;Veera Tulasombut
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Weight;
- Interlaboratory comparison;
- Thailand;
74.A STUDY ON VOLUMETRIC MAGNETIC SUSCEPTIBILITY OF WEIGHT DUE TO ITS MANUFACTURING PROCESS

机译：其制造过程中重量体积磁化率的研究
- 作者：Rungsiya Sukhon;Rattapon Kongchana;Kusuma Khongsiri;Baramee Puntaratronnugoon;Veera Tulasombut
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Weight;
- Magnetic susceptibility;
- Manufacturing process;
75.A NEW METHOD FOR DYNAMIC FORCE MEASUREMENT AT NIM

机译：nim动态力测量的一种新方法
- 作者：Meng Feng;Zhang Yue;Zhang Zhimin;SunQiao
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Dynamic force calibration;
- Laser-Doppler-interferometer;
- Standard machine;
76.UNCERTAINTY EVALUATION OF CHARPY IMPACT TESTING MACHINES

机译：夏比冲击试验机的不确定性评价
- 作者：Saher R. Gawda;A. Abu-Sinna. M. I. Mohamed;Moanes M. Mohamed;Ali E. Abuelezz
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Calibration;
- Impact Testers;
- Uncertainty;
- Direct Method;
77.LOW FREQUENCY VIBRATION MONITORING SYSTEM USING WIRELESS SENSOR NETWORK

机译：使用无线传感器网络的低频振动监测系统
- 作者：N. Ruetaiworraseth;W. Suntiamorntut;B. Thummawut;P. Rattanangkul
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Vibration Monitoring System;
- Wireless Sensor Network;
- Acceleration;
- Low Frequency;
78.DYNAMIC AXIS SCALE WITH HIGH ACCURACY FOR HIGH SPEED MEASUREMENT OF VEHICLE MASS

机译：动态轴比例高精度，高速测量车辆质量
- 作者：David Gichangi Axelson;Koji Tada;Tuan Le;Shinichi Hayashida;Toshio Uchimaru;Yutaka Yamamoto
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Dynamic mass;
- Momentum;
- Vehicle mass measuring;
79.NECESSITY OF RUSSIAN NANOINDENTATION STANDARD BASE DEVELOPMENT

机译：俄罗斯纳米地区标准基础发展的必要性
- 作者：Edward Aslanyan;Peter Krasowski
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Nanoindentation method;
- Martens hardness;
- Primary standard machine;
80.THE MEASUREMENT OF LIQUID DENSITY BY COMPARISON BETWEEN AIR PRESSURES IN CMS

机译：CMS中空气压力比较测量液体密度
- 作者：Feng-yu Yang;Sheau-shi Pan;Horn-Haw Chen;Sheng-Jui Chen
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- U-type;
- Laser interferometer;
- Floating reflectors;
81.INTERLABORATORY COMPARISONS IN ITALY TO VERIFY THE ACCREDITATION ON TORQUE WRENCH CALIBRATION

机译：意大利的Interlaboratory比较验证扭矩扳手校准的认证
- 作者：Carlo Ferrero;Adelina Leka;Luciano Bianchi
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Torque-wrenches;
- Dissemination;
- Comparison;
82.EVALUATION OF UNCERTAINTY OF CONTACT POINT AND CONTACT DEPTH BY USING NON-LINEAR FITTING

机译：使用非线性配件评估接触点和接触深度的不确定度
- 作者：Koichiro Hattori;Yutaka Seino
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Instrumented indentation Test;
- Uncertainty of fitting;
83.MEASUREMENT AND EVALUATION OF DAMPING PROPERTIES OF DAMPING MATERIAL

机译：阻尼材料阻尼性能的测量与评价
- 作者：Chenguang Cai;Qiao Sun
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Damping material;
- Damping ratio;
- Nonlinear vibration;
84.PROTOTYPE OF LOAD CELL APPLICATION IN TORQE MEASUREMENT

机译：扭矩测量中的负载电池应用原型
- 作者：Tassanai Sanponpute;Chokchai Watthong
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Torque wrench calibrator;
- Torque transfer wrench;
- Load cell;
85.CAPABILITIES OF THE LOAD AND PARTIAL UNLOAD TECHNIQUE

机译：负载和部分卸载技术的功能
- 作者：Tanja Haas;Gottfried Bosch;Hans-Peter Vollmar
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Load and partial unload technique;
- Elastic modulus;
- Martens hardness;
86.GRID NANOINDENTATION ON MULTIPHASE MATERIALS FOR MAPPING THE MECHANICAL PROPERTIES OF COMPLEX MICROSTRUCTURES

机译：用于映射复杂微结构的机械性能的多相材料的栅极纳米
- 作者：Jiri Nohava;Petr Hausild;Nicholas X. Randall;Gregory Favaro
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Grid indentation;
- Multiphase materials;
- Statistics;
87.EFFECT OF TIME RELATED PARAMETERS ON ROCKWELL HARDNESS MEASUREMENT OF POLYMERS

机译：时间相关参数对聚合物罗克韦尔硬度测量的影响
- 作者：Gunwoong Bahng;Nae Hyung Tak
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
88.DEVELOPMENT OF PORTABLE ANGULAR VIBRATION EXCITERS

机译：开发便携式角振动振动器
- 作者：Wan-Sup Cheung;Tae-Ik Park
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Angular vibration;
- Vibration exciter;
- Angular exciter;
- Vibration calibration;
- Electro-dynamic exciter;
89.CONSIDERATION OF THE UNCERTAINTY OF MEASUREMENT DURING THE CALIBRATION OF HARDNESS TEST MACHINES

机译：考虑硬度试验机校准过程中测量的不确定性
- 作者：Dieter Schwenk
- 会议名称：《Conference on Measurement of Force, Mass and Torque together with HARDMEKO》 | 2010年
- Uncertainty of measurement;
- Limit deviation;
- ISO 17025;