首页>外文会议>其他>Strength of Materials Laboratory Anniversary

Strength of Materials Laboratory Anniversary

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Investigations regarding the thermoplastic resistance evaluation with simulated imperfections

机译：关于模拟缺陷的热塑性抗性评估的研究
- 作者：Alin Constantin Murariu;Voicu loan Safta;Traian Fleser
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- Mechanical tests;
- thermography;
- thermoplastic materials;
- polyethylene PE 80;
- simulated imperfections;
2.Experimental and Numerical Analysis of Buckling Behaviour of the Ship Plates Made of Composite Materials

机译：复合材料船板屈曲行为的实验与数值分析
- 作者：Elena-Felicia Beznea;lonel Chirica;Raluca Chirica
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- imperfect composite ship panels;
- buckling;
- FEM analysis;
3.Biomechanical 3D analysis of stress induced by orthodontic implants

机译：正畸植入物诱导应激的生物力学三维分析
- 作者：C. Szuhanek;N. Faur;A. Cernescu
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- biomechanics;
- stress analysis;
- finite elements analysis;
- orthodontics;
- implants;
4.The Effect of Geometry and Material Properties on the Load Capacity of Single-Strapped Adhesive Bonded Joints

机译：几何和材料特性对单肩粘合接头负荷能力的影响
- 作者：Marin Sandu;Adriana Sandu;Dan Mihai Constantinescu
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- geometry and material effects;
- single-strapped;
- adhesive bonded joints;
- load capacity;
5.On the Time-Dependent Behavior of FGM Plates

机译：关于FGM板的时间依赖行为
- 作者：Holm Altenbach;Victor A. Eremeyev
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- Time-dependent behavior;
- Functionally graded materials;
- Plates;
- Viscoelasticity;
6.Influence of Cracks on the Service Life of Concrete Structures in a Marine Environment

机译：裂缝对海洋环境中混凝土结构使用寿命的影响
- 作者：Katrien Audenaert;Liviu Marsavina;Geert De Schutter
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- chloride penetration;
- concrete;
- cracks;
- durability;
- service life;
7.Polyurethane foams behaviour. Experiments versus modeling

机译：聚氨酯泡沫行为。实验与建模
- 作者：Liviu Marsavina;Tomasz Sadowski;Dan M. Constantinescu
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- polyurethane foam;
- impregnation;
- tensile test;
- three point bend test;
- compression test.;
8.Fractal analysis of fracture surfaces of steel Charpy specimens

机译：钢夏比标本断裂表面分形分析
- 作者：C. Secrieru;I.DumItru
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- profile;
- fracture surfaces;
- fractal dimension;
- Charpy test;
- profilometer;
- interferometry;
9.Mathematical modelling of the crack propagation in wood materials

机译：木材裂纹繁殖的数学建模
- 作者：Eduard-Marius Craciun;Tomasz Sadowski
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- Crack;
- prestressed composite materials;
- Sih's fracture criterion;
- Pine wood composite;
10.The assessment of remaining life of chemical reactor exposed to creep and fatigue

机译：含有蠕变和疲劳的化学反应器剩余寿命的评估
- 作者：Mateiu Horia;FIeser Traian;Alin Murariu
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- coxing box;
- bimetal shell lining;
- reliability;
- remnant life assessment expert system;
11.Constraint Parameter for a Longitudinal Surface Notch in a Pipe Submitted to Internal Pressure

机译：管道中的纵向表面凹口的约束参数，其提交到内部压力
- 作者：M. Hadj Meliani;M. Benarous;Z. Azari
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- Constraint;
- T-stress;
- Finite Element Analysis;
- Castem2000;
12.Bulk amorphous soft magnetic iron based alloy with mechanical strength and corrosion resistance

机译：散装无定形软磁铁基合金，机械强度和耐腐蚀性
- 作者：Viorel-Aurel Serban;Cosmin Codrean;lon-Dragos Utu
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- bulk amorphous alloys;
- iron based system;
- glass forming ability;
- mechanical properties;
13.Fracture mechanics and non-destructive testing for structural integrity assessment

机译：结构完整性评估的骨折力学和非破坏性测试
- 作者：Stojan Sedmak;Aleksandar Sedmak
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- Pre-cracked specimen;
- Stress intensity factor;
- J integral;
- Crack-opening displacement;
- Non-destructive testing;
- Structural integrity;
14.Experimental and Numerical Analysis of the Behaviour of Ceramic Tiles Under Impact

机译：影响下瓷砖行为的实验与数值分析
- 作者：Dan M. Constantinescu;Marin Sandu;Eniko Volceanov
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- ceramic alumina tile;
- three-point bending;
- strain gauges;
- finite element;
- impact;
- failure;
15.EXPERIMENTAL ASSESSMENT BY FINITE ELEMENTS METHOD OF THE RESIDUAL STRESS STATE AND OF THEHEAT FLOW FROM THE LASER WELDINGS OF THE ALLOYS OF CoCrMo USED IN RPD (REMOVABLE PARTIAL DENTURES) TECHNOLOGY

机译：RPD（可拆卸局部义齿）技术的COCRMO合金激光焊接的残余应力状态和Heat流量的有限元方法的实验评估
- 作者：C. Bortun;N. Faur;A. Cernescu
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
16.Evaluation of Interiaminar Damage and Crack Propagation Through Digital Image Correlation Method

机译：通过数字图像相关方法评估互际损伤和裂纹传播
- 作者：Dan M. Constantinescu;Marin Sandu;Liviu Marsavina
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- digital image correlation;
- sandwich composite;
- local damage;
- crack propagation;
17.Behaviour Analysis of Adhesive Joints Used in Ship Structures

机译：船舶结构中使用的粘性接头的行为分析
- 作者：lonel Chirica;Elena-Felicia Beznea;Alexandru Chirica
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- adhesive joints;
- composites;
- FEM analysis;
18.In vitro experimental testing of a cervical implanted unit

机译：颈椎植入单元的体外实验测试
- 作者：Dan loan Stoia;Nicolae Faur;Mirela Toth-Tascau
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- cervical implanted unit;
- biomechanical behavior;
- dynamic stabilization implant;
- pulsatory test;
- symmetrical test;
- bone-screw interface;
19.Multiscale Modelling of Damage Processes in Polycrystalline Ceramic Porous Composites

机译：多晶陶瓷多孔复合材料损伤过程的多尺度建模
- 作者：T.Sadowski;L.Marsavina
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- Ceramic porous composites;
- mesomechanical model;
- cracks propagation;
20.Application of Complete Gurson Model for prediction of ductile fracture in welded steel joints

机译：完整Gurson模型在焊接钢结构中延性骨折预测中的应用
- 作者：Bojan Medo;Marko Rakin;Nenad Gubeljak
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- Ductile fracture;
- micromechanical model;
- Gurson flow criterion;
- FEM calculation;
21.Fatigue crack growth under variable amplitude loadings--A theoretical study

机译：可变幅度载荷下的疲劳裂纹增长 - 理论研究
- 作者：I. Dumitru;A. Cemescu
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- crack length;
- fatigue crack rate;
- stress intensity factor range;
- overloads;
- crack growth retardation;
22.Micromechanical Material Model of Wooden Veneers for Numerical Simulations of Plywood Progressive Failure

机译：胶合板数值模拟的木制贴面微机械材料模型进行胶合板渐进式故障
- 作者：Ivelin V. Ivanov;Tomasz Sadowski
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- wooden veneers;
- micromechanical models;
- finite element models;
- damage mechanics;
23.Investigation of Implant bone interface with non-invasive methods: numerical simulation, strain gauges and optical coherence tomography

机译：具有非侵入性方法的植入物骨界面的研究：数值模拟，应变仪和光学相干断层扫描
- 作者：Sergiu Antonie;Cosmin Sinescu;Meda Negrutiu
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- dental implant;
- implant interface;
- numerical simulation;
- tensional stamps;
- optical coherence tomography;
24.STRESS ANALYSIS OF THE HUMAN SKULL DUE TO THE INSERTION OF RAPID PALATAL EXPANDER WITH FINITE ELEMENT ANALYSIS (FEA)

机译：利用有限元分析（FEA）插入快速腭膨胀机的人颅骨应力分析
- 作者：Laurentiu CULEA;Cristina BRATU
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- 3D CAD model of human skull;
- rapid palatal expander;
- Finite Element Analysis (FEA);
25.A Pull-Shear Test for Debonding of FRP- Laminates for Concrete Structures

机译：用于混凝土结构FRP-层压板的剥离试验
- 作者：Lluis Gil;Juan Jose Cruz;Marco Antonio Perez
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- Laminate carbon fibers;
- reinforcement concrete;
- anchorage length;
- debonding;
26.Impact Fatigue of Adhesive Joints

机译：粘合剂的影响疲劳
- 作者：Vadim V. Silberschmidt;Juan Pablo Casas-Rodriguez;Ian A. Ashcroft
- 会议名称：《Strength of Materials Laboratory Anniversary》 | 2009年
- Impact Fatigue;
- Adhesive Joints;
- CFRP;
- Crack Propagation;
- Strain Energy Release Rate;
- Finite Element Analysis;