首页>外文会议>其他>Congress of International Federation for Heat treatment and Surface Engineering

Congress of International Federation for Heat treatment and Surface Engineering

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Development of Low and Middle Carbon Martensite Spring Steel with High Strength and Toughness for Automobile

机译：高强度和汽车韧性的低和中碳马氏体弹簧钢的研制
- 作者：LI Ye-sheng;WU Zi-ping;ZHU Ym-lu
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- low and middle carbon martensite;
- alloying;
- spring steel;
- property;
- microstructure;
2.Industrial Experience with Case Hardening of Stainless Steels by Solution Nitriding

机译：用氮化解决方案用外壳硬化的工业经验
- 作者：Hans Berns;Bernd Edenhofer;Roland Zaugg
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Case hardening;
- stainless steel;
- solution nitriding;
- applications;
3.Research on Mediate Temperature Decomposition of High Nitrogen Austenite

机译：高氮奥氏体介导温度分解研究
- 作者：LI Xiao-ling;BEI Duo-hui;HU Ming-juan
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- high nitrogen austenite;
- mediate temperature decomposition;
- gamma'-Fe_4N;
- TEM;
- micro-hardness;
4.Study on Thermomagnetic Treatment Fe-25.5Cr-12Co Permanent Magnetic Alloy

机译：热磁性处理Fe-25.5Cr-12co永磁合金的研究
- 作者：GAO Run-sheng;ZHEN Liang;SHAO Wen-zhu
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Fe-25.5Cr-12Co alloy;
- thermomagnetic treatment;
- magnetic property;
- microstructure;
5.The Influence of Carburizing Parameters on Carbon Transfer Coefficient

机译：渗碳参数对碳传递系数的影响
- 作者：Tadeusz Sobusiak
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- metallurgy;
- heat treatment;
- carburizing;
- carbon transfer coefficients;
6.High Carbon Alloy Steels with Multiple Types of Ultra-fine Carbides and Their Characteristics

机译：高碳合金钢具有多种类型的超细碳化物及其特性
- 作者：MA Yong-qing;GAO Hong-tao;QI Yu-hong
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- ultra-fine carbides;
- high carbon steels;
- alloy composition design;
- transformation;
- structure and properties;
7.Acetylene Vacuum Carburizing

机译：乙炔真空渗碳
- 作者：Hitoshi Iwata
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Acetylene;
- Below 1 kPa;
- Vacuum carburizing;
- Mass production;
8.Effect of Partial Recrystallization on Microstructure and Mechanical Properties for Cross-rolled Molybdenum Sheet

机译：分次重结晶对交叉轧钼板微观结构和机械性能的影响
- 作者：Chengfan Gu;Junliang Zhang
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Microstracture;
- Molybdenum sheet;
- Static heat treatment;
- Mechanical properties;
9.On the Plasma (ion) Carburized Layer of High Nitrogen Austenitic Stainless Steel

机译：高氮奥氏体不锈钢等离子体（离子）渗碳层
- 作者：Y. Veda;N. Kanayama;K. Ichii
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- plasma (ion) carburizing;
- high nitrogen stainless steel;
- GDOES;
10.Effect of Heat-Treatment Parameters on Microstructures and Properties of Cr12W2MoVNbNB Steel

机译：热处理参数对CR12W2MovnBNB钢微观结构和性能的影响
- 作者：WANG Zheng-pin;YAO Yu-hong;LIU Jiang-nan
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- strength;
- plasticity;
- heat stability;
- biphasic structure;
- sub-microstructure;
11.Identification of Heat Transfer Coefficients by Use Conditions of Quenching Oil

机译：用淬火油的使用条件识别传热系数
- 作者：Katsumi Ichitani
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- heat transfer coefficient;
- quenching oil;
- heat-treatment simulation;
12.Development of High Strength Steel Designed for Carbonitriding with High Nitrogen Content to Be Used for Automatic Transmission Gears

机译：开发高强度钢，专为碳氮固定而设计，具有高氮含量以用于自动变速器齿轮
- 作者：Youichi Watanabe
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Carbonitriding;
- Nitrogen;
- Shot peening;
- Contact fatigue strength;
- Pitting;
- Gear;
13.Micro-properties of a Type 316 Steel Annealed in Air and Vacuum

机译：316型钢的微观性能在空气和真空中退火
- 作者：LIU Gui-min;MA Li-li;KURZYDLOWSKI Krzysztof Jan
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- type 316 steel;
- annealing;
- air;
- vacuum;
- micro-property;
14.Microstructure and Mechanical Properties of Molybdenum Sheet after Cross Rolling Processing

机译：交叉轧制加工后钼板的微观结构和力学性能
- 作者：Chengfan Gu;Junliang Zhang
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Molybdenum sheet;
- Straight rolling;
- Cross rolling;
- Microstructure;
- Macrotexture;
- Mechanical properties;
15.Elimination of Quench Cracking by Controlling Agitation Uniformity

机译：通过控制搅拌均匀性消除淬火裂纹
- 作者：CANALE Lauralice C.F;TOTTEN George E
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- heat treatment;
- agitation uniformity;
- ultrasonic agitation;
- agitation by magnetic field;
16.Tribological Performance of Coated Surfaces

机译：涂层表面的摩擦学性能
- 作者：Kenneth Holmberg;Anssi Laukkanen
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- hard coatings;
- FEM modelling;
- stress simulation;
- coating fracture;
17.Microstructure and Mechanical Property of Ni Metal Treated by Surface Mechanical Attrition

机译：地表机械磨损处理Ni金属的微观结构和力学性能
- 作者：WEN Chun-sheng;RONG Yong-hua;T.Y. Hsu
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- nanostructured surface layer;
- microstructure;
- mechanical property;
- surface mechanical attrition.;
18.Standardization of New Sliver Probe for Cooling Power Test of Polymer Quenchant

机译：高分子淬火剂冷却功率试验新简探针的标准化
- 作者：Hideo YOKOTA;Katsumi ICHITANI;Kazuyoshi YAMAMOTO
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Quenchant;
- Cooling Power Test;
- Cooling Curve Test;
- Silver Probe;
- Polymer Quenchant;
19.Recrystallization Behavior of Re-aged Cu-Ni-Si Alloy

机译：重塑Cu-Ni-Si合金的重结晶行为
- 作者：LEI Jing-guo;LIU Ping;ZHAO Dong-mei
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Cu-Ni-Si alloy;
- pre-aging;
- aging precipitation;
- recrystallization;
20.Investigation of Creep Feed Grinding Parameters and Heat treatment Effects on the Nickel-base Superalloys

机译：氯进料研磨参数的研究和镍基超合金的热处理效果
- 作者：Hasan Jamshidi;Sayed Ali Sadough Vanini;Alireza Attari
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Creep feed grinding;
- dressing;
- depth of cut;
- work speed;
- recrystallization;
- burning;
21.Evaluation of Process Capability in Gas Carburizing Process to Achieve Quality through Limit Design Concept

机译：通过极限设计概念评估气体渗碳过程中工艺能力，实现质量
- 作者：K. Palaniradja;N. Alagumurthi;V. Soundararajan
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Gas carburizing;
- optimization;
- carbon potential;
- holding time;
- quenching time;
- furnace temperature;
22.State of the Art Treatment of Non-Ferrous Castings 3-in-1 Heat Treatment Systems Combine Foundry Processes

机译：有色金属铸件的现实技术治疗3合1热处理系统结合铸造工艺
- 作者：Volker R. Knobloch
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Sand molds;
- solution heat treatment;
- de-coring;
- sand reclamation;
- integrating casting processes;
- fluidized beds;
- cost reduction;
23.The Use of 'In Process' Monitoring Equipment in Heat Treatment Today

机译：目前热处理中的“过程”监测设备的使用
- 作者：Dave Plester
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- temperature monitoring;
- profiling;
- RF transmission;
- real time;
- software;
24.Precipitate-Accommodated Plasma Nitriding for Aluminum Alloys

机译：沉淀 - 适用于铝合金的等离子体氮化
- 作者：Patama Visittipitukul;Tatsuhiko Aizawa;Hideyuki Kuwahara
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Plasma nitriding;
- Aluminum alloys;
- Aluminum nitride;
- Precipitaet accommodation;
- Al_2Cu;
25.Changes of Tempering Microstructure and Properties of Fe-Cr-V-Ni-Mn-C Cast Alloys

机译：Fe-Cr-V-Ni-Mn-C铸造合金回火微观结构的变化及性能
- 作者：LIU Yan-xia;MA Yong-qing;WANG Yue-hua
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Fe-Cr-V-Ni-Mn-C alloy;
- tempering process;
- transformation;
- property;
26.Challenges to Introduce Advanced Cooling Technology by the Utilization of Plural Cooling Velocity

机译：通过利用多种冷却速度来引进先进冷却技术的挑战
- 作者：Kiyoshi Funatani
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Distortion;
- hardness;
- cooling curve;
- heat transfer coefficient;
- vapor blanket stage;
- computer simulation;
27.Study on SCS-6/Ti-6Al-4V Composite

机译：SCS-6 / TI-6AL-4V复合材料研究
- 作者：ZENG Li-ying;ZHAO Yong-qing;ZHOU Lian
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- interface;
- fiber reinforced;
- composite;
28.The Research and Application of Non-quenched and Tempered Steel 12Mn2VBS

机译：非淬火和钢化钢12Mn2VBS的研究与应用
- 作者：ZHOU Xian-liang;DONG Ying-hu;HUA Xiao-zheng
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- then on-quenched and tempered steel;
- microstructure and performance;
- cooling speed;
29.Magnetic Flux Controllers for Induction Heating Applications

机译：用于感应加热应用的磁通量控制器
- 作者：Valentin Nemkov;Robert Goldstein;Robert Ruffini
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- heat treatment;
- inductor;
- magnetic flux;
- control;
- concentrator;
- magnetodielectrics;
- computer simulation;
30.Improvement of Strength in 2024 Al Alloy by Enhanced Solution Treatment

机译：增强溶液治疗2024铝合金强度的提高
- 作者：XU Xiaojing;ZHANG Jie;CHEN Kangming
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- aluminum alloy;
- mechanical property;
- solution treatment;
- aging treatment;
31.New Steel Making Process through Reduction and Sintering of Cementite Powder

机译：通过减少和烧结渗碳粉末的新型钢制
- 作者：N. OUCHIDA;M. EGASHIRA;K. NAKASHIMA
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- cementite;
- powder metallurgy;
- reduction;
- sintering;
- hydrogen;
32.Phase Separation Process at Early Aging Stage of Ni42CrTiAl

机译：Ni4222的早期衰老阶段的相分离过程
- 作者：WEI Ying-hui;HOU Li-feng;JIAO Shao-yang
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- alloy;
- spinodal decomposition;
- ordering;
- phase transformation;
33.The Microstructure and Mechanical Properties of the Low Carbon Microalloy Steel by High Voltage Electropulse Heating

机译：低碳微合金钢通过高压电热加热的微观结构和力学性能
- 作者：FAN Xin-min;HUI Jing;YIN Sheng
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- mechanical properties;
- microstructure;
- grain refinement;
- high voltage electropulse discharge heating;
34.Simulations of Viscous Flow Fields of ASTM Assembly and the Effective Average Velocities of Flow Tubes

机译：ASTM组装粘性流场的仿真及流量管的有效平均速度
- 作者：LIU Yang;ZHANG Wei-min;CHEN Nai-lu
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- FEM;
- computer simulation;
- cooling curve;
35.Study On the Tribological Behavior of the Arc-added Glow Discharge Plasma Non-hydrogen Carburization On Titanium Alloy Surfaces

机译：钛合金表面上弧形辉光放电等离子体非氢渗碳的摩擦学行为研究
- 作者：CHEN Fei;ZHAHG Yue-fei;LIU Yu
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Ti6Al4V;
- arc-added glow discharge technique;
- plasma non-hydrogen carburizing;
- tribological behavior;
36.Modification of the Recovery Behavior of TiNi Shape Memory Alloy (SMA) by Chemical Heat Treatment

机译：用化学热处理修改TINI形状记忆合金（SMA）的恢复行为
- 作者：WANG Gao-chao;YANG Gang;HUANG Yi-bin
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- TiNi shape memory alloy;
- Samariuming;
- Linear reversion;
37.An Advanced Oscillation Mixing Method for Improving the Cooling Uniformity in Quenching

机译：一种提高淬火中冷却均匀性的先进振荡混合方法
- 作者：Hiroyuki Hoshino;Hiromitsu Murakami;Hideo Yokota
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- quenchant;
- cooling power;
- distortion;
38.Crystallization Behavior and Magnetic Properties of (Fe0.6Co0.4)86Hf7B6Cul Alloy

机译：（Fe0.6CO0.4）86HF7B6CUL合金的结晶行为和磁性
- 作者：LIANG Xiu-bing;FERENC J. KULIKT.;XU Bin-shi
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- nanocrystalline soft magnetic materials;
- crystallization process;
- isothermal annealing;
- coercivity;
- magnetization;
39.Investigations on the Corrosion Behaviour and Structural Characteristics of Low Temperature Nitrided and Carburised Austenitic Stainless Steel

机译：低温氮化和碳化奥氏体不锈钢腐蚀行为和结构特征的研究
- 作者：D. Munter;H.-J. Spies;H. Biermann
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
40.Solid Solution Nitriding Technology of 15Cr-7.5Mn-2.6Mo Duplex Stainless Steel

机译：固体溶液氮化技术15Cr-7.5mn-2.6mo双相不锈钢
- 作者：FU Rui-dong;ZHAO Pin;WANG Chun-Yu
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- duplex stainless steel;
- solid solution nitriding;
- orthogonal test;
- diffusion activation energy;
41.Preliminary Study to Identify Criterion for Quench Crack Prevention by Computer Simulation

机译：初步研究确定计算机仿真淬火裂纹预防标准
- 作者：Kyozo Arimoto;Fumiaki Ikuta;Takashi Horino
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- Quench Cracking;
- Heat Treatment Simulation;
42.Recrystallizaiton Behavior of Directionally Solidified DZ4 Superalloy

机译：定向凝固DZ4超合金的重新晶体行为
- 作者：LI Yun-ju;ZHANG Wei-fang;TAO Chun-hu
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- directionally solidified superalloy;
- recrystallization;
- heat treatment;
- deformation;
43.Effect of Cold-Rolling on Precipitation Phenomena in Sensitized Type 316L and 304L Austenitic Stainless Steels

机译：冷轧对敏化型316L和304L奥氏体不锈钢沉淀现象的影响
- 作者：H. Tsubakino;A. Yamamoto;T. Yamada
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- 316L;
- 304L;
- cold-roll;
- sensitization;
- precipitation;
- TEM;
44.Improvement of the Corrosion Resistance of High Alloyed Austenitic Cr-Ni-Mo Stainless Steels by Solution Nit-riding

机译：改善溶液Nit-riding的高合金化奥氏体Cr-Ni-Mo不锈钢耐腐蚀性
- 作者：Christine Eckstein;Heinz- Joachim Spies;Jochen Albrecht
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
45.Application of Electron Beam Surface Technologies in the Automotive Industry

机译：电子束表面技术在汽车工业中的应用
- 作者：Rolf Zenker;Anja Buchwalder
- 会议名称：《Congress of International Federation for Heat treatment and Surface Engineering》 | 2004年
- electron beam;
- surface treatment 3D beam deflection;
- steels;
- cast iron;
- Al;
- Mg;
- Ti alloys;
- automotive applications;