首页>外文会议>其他>North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference

North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.TIME DELAY IN CONTROLLER AREA NETWORK (CAN)-BASED NETWORKED CONTROL SYSTEMS

机译：控制器区域网络（CAN）基础网络控制系统的时间延迟
- 作者：Rodrigo Vargas Rodriguez;Ruben Morales Menendez;Ricardo A. Ramirez Mendoza
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Controller Area Network (CAN);
- Networked Control System;
- Time Delay;
- Hidden Markov Models;
2.RAPID PROTOTYPING OF BULK 6H-SIC MEMS STRUCTURES USING A Q-SWITCHED Nd:YAG LASER

机译：使用Q开关Nd的散装6H-SiC MEMS结构的快速原型设计：YAG激光器
- 作者：Ben F. Pecholt;Pal A. Molian
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Silicon Carbide;
- MEMS;
- Diaphragm;
- Nd:YAG Laser;
- Micromachining;
3.ADDRESSING PROCESS PLANNING AND VERIFICATION ISSUES WITH MTConnect

机译：解决MTConnect的过程规划和验证问题
- 作者：Athulan Vijayaraghavan;Lucie Huet;David A. Dornfeld
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Process Planning Verification;
- Machine Tool Interoperability;
- MTConnect;
4.APPLICATION OF FINITE ELEMENT SIMULATION IN METAL FORMING TRIBOLOGY

机译：有限元模拟在金属成形摩擦学中的应用
- 作者：Gracious Ngaile;Chen Yang
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Finite Element Simulations;
- Tribology;
- Metal Forming;
- Tribology Variables;
5.GPU-ACCELERATED SIMT TABU SEARCH FOR THE QUADRATIC ASSIGNMENT PROBLEM

机译：GPU加速SIMT Tabu搜索二次分配问题
- 作者：Weihang Zhu;James Curry;Alberto Marquez
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Quadratic Assignment Problem;
- Tabu Search;
- GPU;
- SIMT;
6.ENABLING MANUFACTURING RESEARCH THROUGH INTEROPERABILITY

机译：通过互操作性启用制造研究
- 作者：David A. Dornfeld;Paul K. Wright;Athulan Vijayaraghavan
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Interoperability;
- Standardization;
- Manufacturing Systems;
7.FORMABILITY OF AUSTENITIC STAINLESS STEELS UNDER WARM HYDROFORMING CONDITIONS

机译：温暖液压成形条件下奥氏体不锈钢的可成形性
- 作者：Eren Billur;Sasawat Mahabunphachai;muammer Koc
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Formability;
- Stainless Steels;
- Hydraulic Bulge Test;
- Warm Hydroforming;
- Finite Element Analysis;
8.NANOFOAMED HIGH-PERFORMANCE POLYMER NANOCOMPOSITES

机译：纳米涂层高性能聚合物纳米复合材料
- 作者：Nicholas J. Vaccaro;Wei Li;Bin Li
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Nanofoam;
- Nanocomposites;
- Solid-State Foaming;
- PEI;
- Carbon Nanofiber;
9.MULTIVARIATE PROCESS CAPABILITY ANALYSIS USING NONPARAMETRIC MODEL AND BOOTSTRAP SAMPLING

机译：使用非参数模型和引导抽样的多变量过程能力分析
- 作者：Ankit Pahwa;Wenzhen Huang
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Manufacturing Process Capability;
- Quality;
- Kernel Density Estimation;
- Bootstrap;
10.EFFECT OF MINIMUM QUANTITY LUBRICATION (MQL) WITH NANOFLUIDS ON GRINDING BEHAVIOR AND THERMAL DISTORTION

机译：最小润滑（MQL）与纳米流体对研磨行为和热变形的影响
- 作者：Uppiliappan Sridharan;Stephen Malkin
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Grinding;
- Fluids;
- MQL;
- Distortion;
11.EFFECT OF SURFACE TEXTURE AND WHITE LAYER BY HARD TURNING VS. GRINDING ON FRICTIONAL PERFORMANCE

机译：硬盘上的表面纹理和白色层的影响磨削摩擦性能
- 作者：R.A. Waikar;Y.B. Guo
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Friction Coefficient;
- Sliding Contact;
- Surface Texture;
- White Layer;
- Hard Turning;
- Grinding;
12.DOUBLE-DIAPHRAGM FORMING OF ADVANCED COMPOSITE SHAPES WITH ACTIVE TOOL SHAPE AND TEMPERATURE CONTROL

机译：具有主动刀具形状和温度控制的先进复合形状双隔膜形成
- 作者：Daniel Walczyk;Chris Munro
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Composites Forming;
- Double-Diaphragm Forming;
- Reconfigurable Tooling;
13.MECHANISTIC FORCE MODELING OF MICRO BALL END MILLING PROCESSES

机译：微球端铣削工艺的机械力建模
- 作者：Mohammad Malekian;Simon S. Park;Mozhdeh Sajjadi
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Micro Machining;
- Cutting Forces;
- Micro Ball End Milling;
- Ploughing;
14.CHARACTERIZATION AND CONTROL OF PIN DIAMETER DURING IN-MOLD ASSEMBLY OF MESOSCALE REVOLUTE JOINTS

机译：Messcale旋转关节模内组合过程中销直径的表征和控制
- 作者：Arvind Ananthanarayanan;Satyandra K. Gupta;Hugh A. Bruck
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- In-Mold Assembly;
- Injection Molding;
- Meso Molding;
15.WEAR OF WC-Co INSERTS IN DRY MACHINING OF SUBMICRON PARTICLE SIZE AERONAUTICAL-GRADE NEAR-? TITANIUM ALLOY

机译：WC-CO插入亚微米粒度的干燥加工过程中靠近 - ？钛合金
- 作者：H.A. Abdel-Aal;M. El Mansori;M. Nouari
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Near-p Titanium Alloys;
- WC-Co Tools;
- Dry Machining;
- Wear of Carbide Inserts;
16.INCREASING ADAPTABILITY OF ASSEMBLY PLANNING AND CONTROL WITH EMBEDDED DECISION-MAKING CAPABILITY

机译：增加组装规划和控制与嵌入式决策能力的适应性
- 作者：Shadi Keshavarzmanesh;Lihui Wang;Hsi-Yung (Steve) Feng
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Adaptive Process Planning;
- Assembly Features;
- Function Blocks;
- Matlab Simulink;
17.ONLINE CLASSIFICATION OF SURFACE DEFECTS IN HOT ROLLING PROCESSES

机译：热轧过程中表面缺陷的在线分类
- 作者：Qingyu Yang;Qiang Li;Judy Jin
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Rolling Process;
- Feature Selection;
- Genetic Algorithm;
- Support Vector Machine (SVM);
18.IMPLEMENTATION OF A METROLOGY FRAME TO IMPROVE POSITIONING OF MICRO/MESO-SCALE MACHINE TOOLS

机译：实现计量框架，以改善微型/中间尺度机床的定位
- 作者：Shawn P. Moylan;Bradley Damazo;M. Alkan Donmez
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Metrology Frame;
- Micro/Meso-Scale Machine Tool;
- Error Compensation;
- Machine Tool Error Motions;
19.CYCLIC WAVEFORM SIGNAL ANALYSIS FOR ONLINE MONITORING OF VALVE SEAT ASSEMBLY PROCESSES

机译：阀座组装工艺在线监测的循环波形信号分析
- 作者：Yong Lei;Kamran Paynabar;Judy Jin
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Cyclic Waveform Signal;
- Wavelet Analysis;
- Valve Seat Assembly;
- Process Monitoring;
- False Rejection;
20.ANALYTICAL PREDICTION OF SHIFTING BEHAVIOR IN STRAIN-BASED SHEET FORMING LIMIT CURVES USING A STRESS-BASED FAILURE CRITERION

机译：使用基于应力的故障标准的应变基片形成极限曲线移位行为的分析预测
- 作者：Brad L. Kinsey;Matthew Derov;Igor Tsukrov
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Failure Prediction;
- Analytical Model;
- Sheet Metal Forming;
21.HOW STRAINS AND STRAIN RATES ARE ACCOMMODATED BY DISLOCATIONS AND TWINS DURING CHIP FORMATION BY MACHINING

机译：通过加工在芯片形成期间，脱位和双胞胎可以如何容纳菌株和应变率
- 作者：S. Shekhar;J. Cai;S. Lee
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Machining;
- Chip Formation;
- Dislocation;
- Twins;
22.A STATE-SPACE HEURISTIC FOR ADAPTIVE PRODUCTION CONTROL IN ONE-OF-A-KIND PRODUCTION

机译：一种型号生产中适应性生产控制的状态空间启发式
- 作者：Wei Li;Barrie R. Nault;Yiliu Tu
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Adaptive Production Control;
- Flow Shop;
- Machine Breakdown;
- One-of-a-Kind Production (OKP);
- Operator Absence;
23.DATA TO INFORMATION: CAN MTConnect DELIVER THE PROMISE?

机译：数据到信息：MTConnect可以提供承诺吗？
- 作者：Sri H. Atluru;Amit Deshpande
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- MTConnect;
- Smart Machine;
- Supervisory System;
- XML;
- Manufacturing Standards;
24.PARAMETRIC INVESTIGATION OF PRECISION IN TOOL-WORKPIECE CONDUCTIVITY TOUCH-OFF METHOD IN MICROMILLING

机译：微米工具工件电导率触控方法的参数调查
- 作者：Angela A. Sodemann;J. Rhett Mayor
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Micromilling;
- Precision;
- Registration;
- Conductivity Touch-off;
25.CUTTING EDGE RADIUS EFFECTS ON DIAMOND-COATED TOOLS

机译：钻石涂层工具的切削刃半径效应
- 作者：Feng Qin;Kevin Chou;Dustin Noland
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Cutting Force;
- Deposition Stresses;
- Diamond-Coated Tools;
- Edge Radius;
- Tool Wear;
26.MINIMUM QUANTITY LUBRICATION (MQL) GRINDING USING VITRIFIED CBN WHEELS

机译：使用玻璃化CBN轮磨削最小数量润滑（MQL）研磨
- 作者：Bin Shen;Albert J. Shih
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Minimum Quantity Lubrication (MQL) Grinding;
- Vitrified CBN Wheel;
- Energy Partition;
27.METHOD TO MEASURE PLANAR DISPLACEMENT USING CENTROID CALCULATION

机译：使用质心计算测量平面位移的方法
- 作者：Carlos A. Montes;John C. Ziegert;Laine Mears
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- CNC;
- Positioning;
- Vision;
- Digital;
- Curve Fitting;
28.STRAINS GENERATED IN SELECTED REGIONS FOR AN INTELLIGENT DIE DURING STAMP FORMING

机译：在邮票成型期间为智能模具产生的选定区域产生的菌株
- 作者：William J. Emblom;Klaus J. Weinmann;John E. Beard
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Sheet Metal;
- Panel Drawing;
- Blankholder;
- Aluminum;
- Drawbead;
- Strains;
- Intelligent Die;
29.ROUGHNESS EVALUATION OF SINGLE POINT INCREMENTALLY FORMED SURFACES

机译：粗糙度评估单点渐进形成表面
- 作者：M. Ham;B. Powers;C.A. Brown
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Forming;
- Sheet Metal;
- Roughness;
- Surface Differentiation;
30.THREE-DIMENSIONAL DIGITAL HALFTONING FOR LAYERED MANUFACTURING BASED ON DROPLETS

机译：基于液滴的分层制造的三维数字半色调
- 作者：Chi Zhou;Yong Chen
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Digital Halftoning;
- Layered Manufacturing;
- Droplet Planning;
- Multi-Jet Modeling;
- Polyjet;
31.SURFACE ROUGHNESS MODELING IN PERIPHERAL MILLING PROCESSES

机译：周边铣削过程中的表面粗糙度建模
- 作者：Antonio Vallejo;Ruben Morales-Menendez;Hugo Elizalde-Siller
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Surface Roughness;
- High-Speed Machining;
- Artificial Neural Networks;
- Statistical Model;
32.SENSOR PLACEMENT STRATEGY FOR STAMPING TOOLING INTEGRATION BASED ON GEOMETRIC METHODS

机译：基于几何方法的冲压工具集成传感器放置策略
- 作者：Sripati Sah;Robert X. Gao
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
33.REDUCING ENVIRONMENTAL IMPACTS OF STEEL PRODUCT MANUFACTURING

机译：减少钢铁产品制造的环境影响
- 作者：Karl R. Haapala;Julio L. Rivera;John W. Sutherland
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Process Modeling;
- Steelmaking;
- Sand Casting;
- Heat Treatment;
- Environmental Performance;
34.FABRICATION AND CHARACTERIZATION OF MICRO DENT ARRAY PRODUCED BY LASER SHOCK PEENING ON ALUMINUM SURFACES

机译：铝表面激光冲击喷丸产生的微观阵列的制造与表征
- 作者：R. Caslaru;M.P. Sealy;Y.B. Guo
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2009年
- Surface Texturing;
- Micro Dent Array;
- Laser Shock Peening;
- Surface Integrity;
35.COMPARISON OF DIMENSIONAL REPEATABILITY OF DEFORMATION MACHINED COMPONENTS WITH SHEET METAL COMPONENTS

机译：用金属板组件的变形机加工部件尺寸重复性比较
- 作者：A. Agrawal;J. Ziegert;J. Cao
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Manufacturing;
- Deformation;
- Thin-wall machining;
- SPIF;
- Repeatability;
36.PHASE TRANSFORMATION EFFECTS ON HIGH STRENGTH STEEL BEHAVIOR DURING HOT STAMPING OPERATIONS

机译：热冲压操作期间高强度钢行为的相变效应
- 作者：P.F. Bariani;A. Ghiotti;S. Bruschi
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Hot stamping;
- High strength steels;
- Phase transformation kinetics;
- Transformation plasticity;
37.EFFECT OF TOOL ROTATION ON THE JOINT STRENGTH OF COLD-WORK DIE STEEL BY FRICTION STIR WELDING

机译：摩擦搅拌焊接刀具旋转对冷工钢联合强度的影响
- 作者：Haruki Sano;Noboru Nakayama;Hiroyuku Takeishi
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Friction stir welding;
- Cold-work die steel;
- Hardness;
- Microstructure;
- Tensile strength;
38.POWER CONSUMPTION STUDY IN KNIFE MILLING OF WHEAT STRAW

机译：小麦秸秆碾磨中的功耗研究
- 作者：Timothy W. Deines;Z.J. Pei
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Biomass;
- Cellulosic biofuel;
- Knife mill;
- Pelleting;
- Wheat straw;
39.COMPENSATION OF COMPLIANCE ERRORS IN MACHINING USING PROCESS INTERMITTENT PROBING

机译：使用过程间歇性探测加工顺应性误差补偿
- 作者：R. Guiassa;J.R.R. Mayer
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Compensation;
- Milling;
- Compliance;
- Error;
- Machining;
- Probing.;
40.DESIGN OF SURFACE METROLOGY SYSTEMS

机译：表面计量系统设计
- 作者：Christopher A. Brown;Brendan M. Powers
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Roughness;
- Axiomatic design;
- Topography;
- Grinding;
41.PREDICTIVE MODELING OF COMPACTION DENSITY IN POWDER METALLURGY COMPONENTS

机译：粉末冶金组分压实密度的预测模型
- 作者：Elham Jafar-Salehi;Ahmad Ghasempoor
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Green density;
- Powder metallurgy compacts;
- Neural networks;
42.EXPERIMENTAL CHARACTERIZATION OF MESO-SCALE GRINDING PROCESS USING COMPRESSED CHILLY AIR

机译：压缩寒冷空气的中间尺度研磨过程的实验表征
- 作者：Pil-Ho Lee;Sang Won Lee
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Meso-scale grinding;
- Compressed chilly air;
- Grinding force;
- Tool wear;
- Surface roughness;
43.A NEW DESIGN OF QUICK STOP DEVICE FOR RESEARCH ON CHIP FORMATION

机译：芯片形成研究的快速停止装置的新设计
- 作者：Roland Bejjani;Marek Balazinski;Bin Shi
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Quick stop device;
- Chip formation;
- Metal matrix composite;
- Chip root microstructure;
44.A PRELIMINARY STUDY ON AN IMPROVED GRINDING PROCESS INTEGRATED WITH INDUCTION HEATING TECHNOLOGY

机译：一种初步研究，改进磨削过程与感应加热技术集成
- 作者：Liang He;Xuekun Li;Gang Wang
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Grinding process;
- Induction heating;
- Internal heat source;
- Thermal induced residual stress;
45.DIAGNOSIS OF MULTIPLE ERROR SOURCES UNDER VARIATION EQUIVALENCE

机译：变化当量下多个误差源的诊断
- 作者：Shaoqiang Chen;Hui Wang;Qiang Huang
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Error equivalence;
- Variation equivalence;
- Manufacturing process;
- Root cause diagnosis;
46.B-SPLINE BASED GENERAL FORCE MODEL FOR BROACHING

机译：基于B样的B-ZLIN键
- 作者：Ali Hosseini;Hossam A. Kishawy
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Broaching operation;
- Cutting edge modeling;
- Force modeling;
- B-spline interpolation;
47.ADDITION OF CARBON NANOFIBER TO COLD-WORK DIE STEEL BY A COMPRESSION ROTATION SHEARING METHOD UNDER ROOM TEMPERATURE: EFFECT OF NANOFIBER VOLUME RATIO ON FRICTIONAL AND MECHANICAL PROPERTIES

机译：室温下的压缩旋转剪切方法加入碳纳米纤维到冷工模钢：纳米纤维体积比对摩擦和力学性能的影响
- 作者：Shinya Tokutake;Noboru Nakayama;Toru Matsuura
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Cold-work die steel;
- Carbon nanofiber;
- Friction coefficient;
- Hardness;
48.ELECTROCHEMICAL DISCHARGE MACHINING USING MICRO-DRILLING TOOLS

机译：使用微钻工具电化学放电加工
- 作者：Chenjun Wei;Jun Ni;Dejin Hu
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Electrochemical discharge machining (ECDM);
- Micro-drilling;
- Hybrid machining;
- Gravity-feed;
49.MODELING OF MICROCHANNEL BUCKLING DUE TO THERMAL STRESSES DURING DIFFUSION BONDING

机译：扩散粘合期间热应力引起的微通道屈曲的建模
- 作者：Gopi K. Lingam;Brian K. Paul
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Warpage;
- Thermal stresses;
- Buckling theory;
- MECS;
- Arrayed microchannels;
- Finite element analysis;
- Stainless steel 316L;
50.SOLVING THE FORWARD KINEMATICS PROBLEM OF A PARALLEL KINEMATIC MACHINE USING THE NEURAL NETWORK METHOD

机译：用神经网络方法求解并联运动机的前进运动学问题
- 作者：Dan Zhang;Qi Shi;Jianhe Lei
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Forward/inverse kinematics;
- Parallel kinematic machine;
- Neural network;
- Multilayer perceptron (MLP);
- Back-propagation;
51.AN EXPERIMENTAL ANALYSIS OF CHIP FORMATION IN CIRCULAR MICRO-END-MILLING

机译：圆形微终铣削中芯片形成的实验分析
- 作者：Avisekh Banerje;Evgueni V. Bordatchev
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Chip formation;
- Circular tool path;
- Micro end-milling;
- Cutting force;
52.HIGH-DEFINITION METROLOGY BASED ROOT CAUSE DIAGNOSIS USING 2-D DISCRETE COSINE TRANSFORM

机译：基于高清计量的根本原因使用2-D离散余弦变换诊断
- 作者：Xuejun Lu;Hui Wang;Liang Zhou
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
53.CUBIC BORON NITRIDE PARTICLE-BASED NANOCOMPOSITE CUTTING TOOL COATING FOR TURNING NODULAR CAST IRON

机译：基于立方硼氮化物颗粒的纳米复合材料切削刀具，用于转动结节铸铁
- 作者：Wenping Jiang;Ajay P. Malshe
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Cubic boron nitride;
- Nanocomposite coating;
- Turning;
- Nodular cast iron;
- Tool wear;
54.DISPENSER PRINTING FOR PROTOTYPING MICROSCALE DEVICES

机译：用于原型图形的分配器打印
- 作者：Paul K. Wright;David A. Dornfeld;Alic Chen
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Direct writing;
- Dispenser printing;
- Microscale devices;
- Prototyping;
55.FABRICATION AND CHARACTERIZATION OF BULK NANOSTRUCTURED MATERIALS OF STEEL AND ALUMINUM ALLOYS BY SHOT PEENING

机译：喷丸铝合金散装纳米结构材料的制造与表征
- 作者：R. Waikar;Y.B. Guo;K.A. Woodbury
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Bulk nanomanufacturing;
- Nanostructured materials;
- Shot peening;
- Severe plastic deformation;
56.TEN PARAMETER SCREENING OF THE SINGLE POINT INCREMENTAL FORMING PROCESS

机译：单点增量成型过程的十参数筛选
- 作者：Adam F. Nagy-Sochacki;Robert Gresham;Shankar Kalyanasundaram
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Incremental;
- Forming;
- Parameters;
- Design of experiments;
57.ASSEMBLY INDUCED INHOMOGENEOUS COMPRESSION OF PROTON EXCHANGE MEMBRANE FUEL CELLS

机译：组装诱导质子交换膜燃料电池的不均匀压缩
- 作者：Yuanyuan Zhou
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Proton exchange membrane fuel cell;
- Inhomogeneous compression;
- Assembly-;
- Performance degradation;
58.ENERGY CONSUMPTION AND CO_2 EMISSIONS FOR MANUFACTURING COMPRESSED AIR SYSTEMS

机译：用于制造压缩空气系统的能量消耗和CO_2排放
- 作者：Dakoua C. Diarra;Jack Jeswiet;Blair Astle
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Energy consumption;
- Manufacturing;
- Compressed air;
- Carbon emissions;
59.DETERMINATION OF BURR REMOVAL DIFFICULTIES IN GAS TURBINE ENGINE COMPONENTS

机译：燃气涡轮发动机部件中的毛刺去除困难的测定
- 作者：Brian Petz;Fengfeng (Jeff) Xi;Serefettin Engin
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Burr removal;
- Deburring;
- Edge finishing;
- Quantification;
- Turbine disc;
60.AN INVESTIGATION OF THE EFFECTS OF CUTTING CONDITIONS, TOOL EDGE GEOMETRY, AND WORKPIECE HARDNESS ON SURFACE INTEGRITY IN ORTHOGONAL MACHINING OF AISI 52100 STEEL

机译：调查切割条件，工具边缘几何形状和工件硬度对AISI 52100钢正交加工表面完整性的影响
- 作者：Anshu D. Jayal;Oscar W. Dillon;Jr. and I.S. Jawahir
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Hard machining;
- White layer;
- Dark layer;
61.DETERMINATION OF JOHNSON-COOK MATERIAL MODEL CONSTANTS FOR AISI 4340 HR BY METAL CUTTING

机译：金属切割确定AISI 4340小时的约翰逊厨师材料模型常数
- 作者：Amit Deshpande;Vis Madhavan;Mahmoud Al-Bawaneh
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Johnson-Cook constitutive model;
- Indentation force;
- Flow stress calculation;
- AISI 4340;
- FEA;
62.2D CUTTING SIMULATIONS WITH A DIAMOND-COATED TOOL INCLUDING DEPOSITION RESIDUAL STRESSES

机译：2D用金刚石涂层工具切割模拟，包括沉积残余应力
- 作者：Feng Qin;Kevin Chou
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Cutting simulation;
- Deposition stress;
- Diamond coated tool;
- Edge radius;
63.HIGH PERFORMANCE MACHINING OF HARDENED STEEL USING CBN CUTTING TOOLS IN DIE AND MOLD MANUFACTURING

机译：用CBN切割工具在模具制造中使用CBN切割工具的高性能加工
- 作者：Hector R. Siller;Ciro A. Rodriguez;Carlos Vila
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- High performance machining;
- Hardened steel;
- Face milling;
- Surface grinding;
64.GA BASED OPTIMIZATION FOR DETERMINING JOHNSON-COOK MATERIAL PARAMETERS UNDER ORTHOGONAL CUTTING CONDITIONS

机译：基于GA的正交切割条件确定约翰逊烹饪材料参数的优化
- 作者：Lei Pang;Hossam A. Kishawy;Marek Balazinski
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Metal cutting;
- Inverse system identification;
- Genetic algorithm;
- Johnson-Cook model;
65.DEEP DRAWING OF 5052 ALUMINUM STRIPS USING ELECTRICALLY-ASSISTED MANUFACTURING (EAM)

机译：使用电气辅助制造（EAM）的5052铝带的深层绘图
- 作者：Trevor J. Collins;John T. Roth
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Deep drawing;
- Al 5052;
- Electrically-assisted manufacturing;
- Springback reduction;
66.MICRO ROTARY ULTRASONIC MACHINING: EFFECT OF MACHINING PARAMETERS ON MATERIAL REMOVAL RATE

机译：微型旋转超声波加工：加工参数对材料去除率的影响
- 作者：Aarati Sarwade;K.P. Rajurkar
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Micro rotary ultrasonic machining;
- Micro manufacturing;
- Brittle materials;
67.INCORPORATING STABILITY, SURFACE LOCATION ERROR, TOOL WEAR, AND UNCERTAINTY IN THE MILLING SUPER DIAGRAM

机译：在铣削超图中采用稳定性，表面定位误差，工具磨损和不确定性
- 作者：Jaydeep Karandikar;Raul E. Zapata;Tony L. Schmitz
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Machining;
- Chatter;
- Surface location error;
- Flank wear;
68.AUTOMATIC FEATURE EXTRACTION AND CLASSIFICATION OF SURFACE DEFECTS IN CONTINUOUS CASTING

机译：连续铸造中表面缺陷的自动特征提取及分类
- 作者：Qingyu Yang;Jionghua Jin;Tzyy-Shuh Chang
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Continuous casting;
- Process monitoring;
- Feature extraction;
- Classification method;
69.EMPIRICAL MODELING OF THE STRESS-STRAIN RELATIONSHIP FOR AN UPSETTING PROCESS UNDER DIRECT ELECTRICAL CURRENT

机译：直接电流下镦锻过程应力 - 应变关系的经验建模
- 作者：Joshua J. Jones;Laine Mears;John T. Roth
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Electroplasticity;
- Compression;
- Empirical;
- Flow stress;
- Energy field manufacturing;
70.EFFECT OF LASER PULSE OVERLAP ON MACHINED DEPTH

机译：激光脉冲重叠对机加工深度的影响
- 作者：Tiffany A. Davis;Jian Cao
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Picosecond laser;
- Micromachining;
- Surface texture;
71.CALCULATION OF CARBON EMISSIONS IN METAL FORMING MANUFACTURING PROCESSES WITH ECO-BENIGN LUBRICATION

机译：生态良性润滑的金属形成制造过程中碳排放的计算
- 作者：P. Nava;J. Jeswiet;I.Y. Kim
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Optimization;
- Carbon emission;
- Manufacturing;
- Metal forming;
- Ecologically benign lubricants;
- FEM;
72.INFLUENCE OF GEOMETRICAL PARAMETERS ON MATERIAL WELDING IN PORTHOLE DIE EXTRUSION: FE ANALYSIS

机译：几何参数对舷窗模具挤出材料焊接的影响：Fe分析
- 作者：Elisabetta Ceretti;Claudio Giardini
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Extrusion;
- Porthole die;
- Welding criteria;
- FEM simulation;
73.DRILLING HOLES IN CFRP COMPOSITE LAMINATES USING A ROUTER TOOL

机译：使用路由器工具在CFRP复合材料层叠中钻孔
- 作者：Sathyan Subbiah;Sridhar Idapalapati
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- CFRP composites;
- Drilling holes;
- Router;
- Delamination;
- Fiber pull-out;
74.EXPERIMENTAL DETERMINATION OF STRAIN RATE AND FLOW STRESS IN THE PRIMARY SHEAR ZONE WHILE MACHINING HOT ROLLED AISI 4340

机译：初级剪切区应变率和流量应力的实验测定加工热轧AISI 4340
- 作者：Kiran Srinivasan;Vis Madhavan
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Flow stress;
- Strain rate;
- Metal cutting;
- Digital image correlation;
- Shear angle;
75.TRIBOLOGICAL STUDY OF NANO LUBRICANT INTEGRATED SOYBEAN OIL FOR MINIMUM QUANTITY LUBRICATION (MQL) GRINDING

机译：纳米润滑剂综合大豆油的摩擦学研究，用于最小润滑（MQL）研磨
- 作者：Parash Kalita;Ajay P. Malshe;Albert J. Shih
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Grinding;
- Minimum quantity lubrication (MQL);
- Molybdenum disulphide (MoS_2);
- Nano lubricant;
- Nanoparticles;
- Tribotesting;
76.ENERGY-BASED MODELING OF AN ELECTRICALLY-ASSISTED FORGING PROCESS

机译：基于能量的电气辅助锻造过程建模
- 作者：Cristina Bunget;Wesley A. Salandro;Laine Mears
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Energy Field Manufacturing;
- Energy Method;
- Deformation;
77.PERFORMANCE OF WEAR COMPENSATION STRATEGIES IN MULTI-MACHINE MANUFACTURING CELLS WITH CMM FEEDBACK

机译：具有CMM反馈的多机械制造单元中磨损补偿策略的性能
- 作者：Tom Bering;Stephen C. Veldhuis
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- SPC;
- CMM;
- Feedback;
- Tool wear;
- Cell;
- Flexible manufacturing;
78.PERFORMANCE OF GRAPHITE NANOPLATELET-ENHANCED FLUID IN REDUCED QUANTITY LUBRICATION CENTERLESS GRINDING

机译：石墨纳米薄板增强流体在减少量润滑无心磨削中的性能
- 作者：Sead Dzebo;John Morehouse;Kyriaki Kalaitzidou
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Centerless grinding;
- Grinding fluid;
- Reduced quantity lubrication;
- Graphite nanoplatelets;
79.VISUAL CATEGORIZATION AND QUANTIFICATION OF THE ORANGE PEEL EFFECT IN SINGLE POINT INCREMENTAL FORMING AT HIGH FORMING SPEEDS

机译：高成型速度单点增量成型中橙皮效应的视觉分类和定量
- 作者：K. Hamilton;J. Jeswiet
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Orange peel;
- Roughness differentiation;
- Incremental forming;
- Statistical modeling;
80.A NEW FEM APPROACH TO PREDICT RESIDUAL STRESS PROFILES IN HARD TURNING WITHOUT SIMULATING CHIP FORMATION

机译：一种新的FEM方法来预测硬转向硬盘残留应力谱的情况下芯片形成
- 作者：S. Anurag;Y.B. Guo;Z.Q. Liu
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Residual stress profile;
- Plowed depth;
- Size effect;
- Finite element modeling;
- Hard turning;
81.A MULTIDIMENSIONAL ACCELERATION SENSOR BASED ON 3RRPRR DECOUPLING PARALLEL MECHANISM: ANALYSIS AND EXPERIMENTS

机译：基于3rrprr解耦并联机制的多维加速度传感器：分析与实验
- 作者：Zhen Gao;Dan Zhang
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- 3RRPRR;
- Acceleration sensor;
- Prototype;
- Finite element analysis;
- Calibration;
82.A COMPARISON OF MANUFACTURING CARBON EMISSION CALCULATORS

机译：制造碳排放计算器的比较
- 作者：P.Nava;J. Jeswiet;D.C. Diarra
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Manufacturers;
- Carbon emission calculations;
83.TOWARD IMPROVING THE MANUFACTURED CONSISTENCY OF WOODEN MUSICAL INSTRUMENTS THROUGH FREQUENCY MATCHING

机译：通过频率匹配来改善木制乐器的制造一致性
- 作者：Patrick Dumond;Natalie Baddour
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Frequency matching;
- Assumed shape method;
- Musical instrument;
- Consistency;
- Manufacturing;
84.OPTIMIZATION OF D2 STEEL LAPPING WITH A TRIBOLOGICAL DESIGNED PLATE

机译：用摩擦学设计板优化D2钢研磨
- 作者：Yiying Zhang;loan D. Marinescu;Rick VandenBoom
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Lapping;
- Abrasive;
- Material removal rate;
- Surface roughness;
- Polymer;
- Tribological designed plate;
85.MICRO-DIMPLE FORMING FOR INNER SURFACE OF PIPE

机译：管内表面的微浊度形成
- 作者：Masaru Futamura;Kuniaki Dohda;Takehiko Makino
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Micro forming;
- Tool;
- Dimple forming;
- Burnishing;
86.EXPERIMENTAL DETERMINATION AND ANALYSIS OF FLOW STRESS ON MICRO TUBE HYDROFORMING PROCESSES

机译：微管液压成型工艺流量应力的实验测定与分析
- 作者：Kenny Ng;Scott W. Wagner;William J. Emblom
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Micro tube;
- Micro hydroforming;
- Micro tension flow stress;
- FEA;
87.TISSUE OBLIQUE CUTTING FLOW ANGLE AND NEEDLE INSERTION CONTACT LENGTH

机译：组织斜切割流量和针插入触头长度
- 作者：Jason Z. Moore;Albert J. Shin
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Chip flow angle;
- Tissue cutting;
- Needle biopsy;
- Contact length;
- Blade cutting;
88.A RECONFIGURABLE FOUR DEGREES OF FREEDOM MODULAR SERIAL ROBOT SYSTEM: DESIGN AND ANALYSIS

机译：可重新配置的四个自由度模块化串行机器人系统：设计和分析
- 作者：Dan Zhang;Jianhe Lei;Qi Shi
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Reconfigurable manufacturing system;
- Reconfigurable modular robot;
- Robot kinematics;
- Distributed control system;
- Java3D;
89.EFFECT OF CLEARANCE AND EMBEDDING DEPTH ON SENSING FOR INTEGRATED FORMING PROCESS MONITORING

机译：间隙和嵌入深度对集成形成过程监测感应的影响
- 作者：Sripati Sah;Robert X. Gao
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Contact pressure measurement;
- Embedded sensing;
- Clearance effects;
- Tooling integrated sensing;
- Contact modeling;
90.HYBRID KNOWLEDGE SYSTEM FOR OPTIMIZATION OF ROLLING PROCESS OF DP STEELS

机译：用于优化DP钢轧制过程的混合知识系统
- 作者：Lukasz Madej;Lukasz Rauch;Maciej Pietrzyk
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Technology design;
- Hybrid knowledge system;
- Optimization;
- Rolling;
- DP steels;
91.A NEW ALGORITHM FOR MOTION PLANNING OF FIXTURE LOADING

机译：一种新的夹具负载运动规划算法
- 作者：Xiumei Kang;Qingjin Peng
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Motion planning;
- A Star algorithm;
- Accessibility analysis;
- Fixture loading and unloading;
- Virtual manufacturing;
92.TOOL WEAR CHARACTERISTICS OF MICRO MILLING OF OPTICAL GLASS

机译：光学玻璃微铣刀工具磨损特性
- 作者：Takenori Ono
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Glass milling;
- Crack-free surface;
- Ball end mill;
- Loss of cutting edge;
- Surface profile;
- Optical glass;
93.DESIGN AND DEVELOPMENT OF CUTTING FLUID SYSTEM BASED ON ULTRASONIC ATOMIZATION FOR MICRO-MACHINING

机译：基于超声雾化微加工的切削液系统的设计与开发
- 作者：M. Rukosuyev;C.S. Goo;M.B.G. Jun
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Cutting fluid;
- Ultrasonic atomization;
- Micro-milling;
- Atomized spray;
- Cutting fluid application;
94.USING FEA SIMULATION TO DESIGN MULTI-STAGE MICRO DIES TO FORM STAINLESS STEEL 304 MICRO TUBES

机译：使用FEA仿真设计多级微模具，形成不锈钢304微管
- 作者：Jenn-Terng Gau;Phani Kumari Paritala;Ming-Hsueh Wu
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Micro Deep Drawing;
- Micro Sheet Forming;
- Size Effects;
- Micro Cups;
- Micro Tubes;
95.RELIABILITY ANALYSIS OF MASS FINISHING PROCESSES

机译：质量整理过程的可靠性分析
- 作者：Vikram Cariapa;Hyunjae Park;Cunjiang Cheng
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Mass finishing machine;
- Reliability functions;
96.OPTIMIZATION OF LOCALIZED ANNEALING FOR PREFORM ANNEAL FORMING OF ALUMINUM ALLOYS

机译：铝合金预制件退火形成局部退火的优化
- 作者：Jingjing Li;Yuanyuan Zhou;S. Jack Hu
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
97.FAILURE MECHANISMS ENCOUNTERED IN MICRO-MILLING OF ALIGNED CARBON FIBER REINFORCED POLYMERS

机译：对准碳纤维增强聚合物微铣削遇到的失效机制
- 作者：K.A. Calzada;J. Samuel;S.G. Kapoor
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Carbon fiber-reinforced polymers;
- Composites;
- Micro-milling;
- Failure mechanisms;
98.AN INVESTIGATION ON THE FORMABILITY OF AEROSPACE ALUMINUM ALLOYS AA2024 AND AA7075 UNDER WARM HYDROFORMING CONDITIONS

机译：温暖液压成形条件下航空航天铝合金AA2024和AA7075成形性的研究
- 作者：Gopal Parekh;Steven Hall;Muammer K09
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Aluminum sheet;
- Formability;
- Lightweight material;
- Warm bulge test;
- AA2024;
- AA7075;
99.A FRAMEWORK FOR PREDICTING SUBTLE SURFACE DISTORTION IN SHEET METAL FLANGING

机译：用于预测金属板法兰中的微妙表面变形的框架
- 作者：Y. Huang;N. Mahayotsanun;J. Cao
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Surface distortion;
- Flanging;
- Buckling;
- Sheet metal forming;
100.INFLUENCE OF KINEMATICS ON LAPPING EFFICIENCY AND LAP WEAR

机译：运动学对研磨效率和膝盖磨损的影响
- 作者：Alex Fang;Songsheng Zhou
- 会议名称：《North American Manufacturing Research Institution of theSociety of Manufacturing Engineers Conference》 | 2010年
- Lapping;
- Material removal rate;
- Kinematics;
- Lap wear;
- Mean path velocity;