首页>外文会议>其他>IEEE International Conference on Nanomaterials: Applications and Properties

IEEE International Conference on Nanomaterials: Applications and Properties

召开年：2020
召开地：Sumy(UA)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.N-Doped Zigzag Graphene Nanoribbons For Nanoscale Interconnects

机译：N-掺杂的Z字形石墨烯纳米纳米用于纳米级互连
- 作者：Sonal Agrawal;Anurag Srivastava;Gaurav Kaushal
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Graphene;
- Quantum capacitance;
- Nitrogen;
- MONOS devices;
- Carbon;
- Nanoscale devices;
- Doping;
2.Comparative Performance Analysis of TMD based Multi-Bridge Channel Field Effect Transistor

机译：基于TMD的多桥通道场效应晶体管的比较性能分析
- 作者：Foez Ahmed;Robi Paul;Jibesh K. Saha
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Logic gates;
- Field effect transistors;
- Threshold voltage;
- Performance evaluation;
- FinFETs;
- Niobium;
- Capacitance;
3.Maximum Detected Frequency of a Detector of Terahertz Frequency Signals based on an Antiferromagnetic Tunnel Junction

机译：基于反铁磁隧道结的太赫兹频率信号检测器的最大检测频率
- 作者：P. Yu. Artemchuk;S. Louis;O. V. Prokopenko;V. S. Tyberkevych;A. N. Slavin
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Detectors;
- Junctions;
- Electromagnetics;
- Signal to noise ratio;
- Signal processing;
- Resistance;
- Frequency measurement;
4.Nanoscale Magnetic Properties of Additively Manufactured FeCoNiAlxMnx High-Entropy Alloys

机译：纳米级磁性性质的含有含有的FeconialXMNX高熵合金
- 作者：Anthoula Poulia;Amin Azar;Peter Svec;Calliope Bazioti;Branson Belle;Anette Eleonora Gunnæs;Spyros Diplas;Pavlo Mikheenko
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Magnetic resonance imaging;
- Magnetic properties;
- Manganese;
- Magnetic domains;
- Soft magnetic materials;
- Magnetic fields;
- FCC;
5.Magnetoresistive Properties of Thin-film Systems Based on Permalloy and Silver

机译：基于Permololoy和银的薄膜系统磁阻性能
- 作者：Iryna M. Pazukha;Denys O. Shuliarenko;Oleksandr O. Pylypenko
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Annealing;
- Magnetoresistance;
- Iron;
- Nickel;
- Magnetic properties;
- Metals;
- Magnetic fields;
6.Terahertz-Frequency Signal Source Based on an Array of Antiferromagnetic Spin Hall Oscillators

机译：基于一系列反铁磁旋转霍尔振荡器的太赫兹频率信号源
- 作者：Oleh Shtanko;Oleksandr Prokopenko
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Oscillators;
- Resonant frequency;
- Dielectrics;
- Power generation;
- Q-factor;
- Magnetization;
- Metals;
7.The Nanocuticle Technology (ARTIficial CutiCLE: “ARTICLE”) to Improve the Hatching of Chicken Eggs in the Poultry Farms of Countries Affected by Global Warming

机译：纳米型技术（人造角质层：“物品”），以改善受全球变暖影响的家禽鸡蛋鸡蛋孵化
- 作者：Olga G. Bordunova;Valeriy B. Loboda;Oksana I. Ivanova;Yevgeniya A. Samokhina;Tatyana.O. Chernyavska;Vadym D. Chivanov
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Contamination;
- Calcium compounds;
- Metals;
- Surface morphology;
- Nanoparticles;
- Global warming;
- Birds;
8.Synthesis and Electrochemical Properties of Polyaniline Composites

机译：聚苯胺复合材料的合成与电化学性能
- 作者：Yaroslav Kovalyshyn;Ivanna Tereniak;Ivan Saldan;Oleksandr Reshetnyak;Roman Serkiz
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Graphite;
- Surface morphology;
- Electrodes;
- Conductivity;
- Nanocomposites;
- Scanning electron microscopy;
- Polymers;
9.Structure, Hardness and Wear Resistance of the NiCr-Al Detonation Coating

机译：Nicr-Al爆炸涂层的结构，硬度和耐磨性
- 作者：Maulet Meruyert;Bauyrzhan Rakhadilov;Olga Stepanova;Zhuldyz Sagdoldina;Askar Kassymov;Dauir Kakimzhanov
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Filling;
- Powders;
- Explosives;
- Spraying;
- Surface treatment;
- Steel;
- Boilers;
10.Investigation of Injection Moulded UHMWPE Liner Manufacturability

机译：注塑型UHMWPE衬里制造性的调查
- 作者：Kitti Keszei;Norbert Krisztián Kovács
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Polyethylene;
- Prototypes;
- Temperature measurement;
- Injection molding;
- Logic gates;
- Solid modeling;
- Optical variables measurement;
11.Buckling Behavior of Isogrid Composite Structures Obtained by Fused Deposition Modeling Technique

机译：用熔融沉积建模技术获得的异格流复合结构的屈曲行为
- 作者：Archimede Forcellese;Tommaso Mancia;Michela Simoncini;Luciano Greco;Massimiliano Pieralisi
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Ribs;
- Carbon;
- Three-dimensional displays;
- Frequency division multiplexing;
- Three-dimensional printing;
- Lattices;
- Industrial engineering;
12.CAD-platform-based Process optimization Design Method by Selective Laser Melting Simulation

机译：基于CAD平台的过程优化设计方法选择性激光熔化仿真
- 作者：Enrico Dalpadulo;Fabio Pini;Francesco Leali
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Solid modeling;
- Powders;
- Residual stresses;
- Computational modeling;
- Deformable models;
- Strain;
- Shape;
13.The Active Wave Resistance Determination of Hollow Perforated Rotor of Electromechanical Converter

机译：机电转换器中空多孔转子的主动波电阻确定
- 作者：Mykola Zablodskiy;Volodymyr Gritsyuk;Olga Tymofieieva
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Rotors;
- Three-dimensional printing;
- Immune system;
- Production;
- Resistance;
- Solids;
- Finite element analysis;
14.Numerical and Experimental Analysis of Additive Manufactured Porous Regenerator for Stirling Cryocooler

机译：添加剂制造多孔再生器用于斯特林冷冻机的数值和实验分析
- 作者：Kadayam Venkatraman Srinivasan;Arulprakasajothi Mahalingam;Revanth Metla
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Lattices;
- Stress;
- Helium;
- Finite element analysis;
- Solid modeling;
- Liquid nitrogen;
- Computational modeling;
15.In-situ Alloying as a Novel Methodology in Additive Manufacturing

机译：原位合金化作为添加剂制造业的新方法
- 作者：Alexander Katz-Demyanetz;Andrey Koptyug;Vladimir V. Popov
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Alloying;
- Powders;
- Metals;
- Microstructure;
- Three-dimensional printing;
- Raw materials;
- Production;
16.Experimental Study of Aluminum Foams Thermal Conductivity. Prospects of Additive Manufacturing for Novel Heat Exchangers Production

机译：铝泡沫导热率的实验研究。新型热交换器生产添加剂的前景
- 作者：Aleksey Kovalevsky;Ariel Mats;Mark Shmurak;Alex Fleisher
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Heating systems;
- Aluminum;
- Metal foam;
- Heat transfer;
- Temperature measurement;
- Conductivity;
- Production;
17.Investigation of the Printing Parameters Influence on the Bond Lines Length in Fused Filament Fabrication

机译：印刷参数对熔融丝制造中粘接线长度的影响
- 作者：Larysa Hurina;Yevhen Vyshnepolskyi;Dmytro Pavlenko;Dmytro Stepanov
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Printing;
- Bonding;
- Shape;
- Polymers;
- Field-flow fractionation;
- Geometry;
- Additives;
18.Effect of Build Orientation in Electron Beam Melting of Ti-6Al-4V Specimens

机译：基于-6A-4V样本的电子束熔化中的构建取向的影响
- 作者：Gary Muller-Kamskii;Stepan Stepanov;Evgeny Strokin;Anastasia Kolomiets;Igor Kovalevskyi;Artemiy Popov
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Microstructure;
- Three-dimensional printing;
- Electron beams;
- Powders;
- Scanning electron microscopy;
- Titanium alloys;
- Mechanical factors;
19.Advantages of 3D Printing for Gynecology and Obstetrics: Brief Review of Applications, Technologies, and Prospects

机译：妇科和产科3D打印的优势：介绍应用，技术和前景
- 作者：Elena Kudryavtseva;Vladimir Popov;Gary Muller-Kamskii;Ekaterina Zakurinova;Vladislav Kovalev
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Three-dimensional printing;
- Solid modeling;
- Three-dimensional displays;
- Biological system modeling;
- Surgery;
- Gynecology;
- Planning;
20.3D Printed Lattice Structures: A Brief Review

机译：3D印刷格子结构：简要评论
- 作者：Ande Harshavardhan Reddy;Saritha Davuluri;Dhatreyi Boyina
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Lattices;
- Three-dimensional printing;
- Three-dimensional displays;
- Mechanical factors;
- Geometry;
- Solid modeling;
- Periodic structures;
21.Supply Chain and Cost Evaluation for Laser Powder Bed Fusion

机译：激光粉床融合的供应链和成本评估
- 作者：Matthias Schneck;Matthias Schmitt;Georg Schlick
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Supply chains;
- Production;
- Companies;
- Benchmark testing;
- Manufacturing;
- Three-dimensional printing;
- Powders;
22.Predicting the Properties of the Refractory High-Entropy Alloys for Additive Manufacturing-Based Fabrication and Mechatronic Applications

机译：预测耐火材料高熵合金的性质，用于添加制造基础制造和机电型应用
- 作者：Vladimir Buranich;Vladyslav Rogoz;Bogdan Postolnyi;Alexander Pogrebnjak
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Metals;
- Mechanical factors;
- Steel;
- Three-dimensional printing;
- Predictive models;
- Mechatronics;
- Databases;
23.Creation of Volumetric Products Using Additive Arc Cladding with Compact and Powder Filler Materials

机译：使用压块和粉末填充材料的添加剂弧形包层创建体积产品
- 作者：Viktor Kvasnytskyi;Volodymyr Korzhyk;Ivan Lahodzinkyi;Yevhenii Illiashenko;Sviatoslav Peleshenko;Oleksandr Voitenko
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Welding;
- Wires;
- Powders;
- Additives;
- Substrates;
- Solids;
- Shape;
24.Surface Polishing of Laser Powder Bed Fused Superalloy Components by Magnetic Post-treatment

机译：激光粉床的表面抛光通过磁性后处理熔融超合金组分
- 作者：Dmytro Lesyk;Vitaliy Dzhemelinskyi;Bohdan Mordyuk;Silvia Martinez;Olena Stamann;Aitzol Lamikiz
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Surface treatment;
- Surface roughness;
- Rough surfaces;
- Metals;
- Powders;
- Surface topography;
- Surface emitting lasers;
25.Smart Modelling of Additively Manufactured Metamaterials

机译：瘦型制造超材料的智能建模
- 作者：Garrido Fernández de Vera Conrado;Barba Cancho Daniel
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Computational modeling;
- Metamaterials;
- Solid modeling;
- Finite element analysis;
- Bars;
- Lattices;
- Three-dimensional printing;
26.Advanced Smoothing for Voxel-based Topologically Optimized 3D Models

机译：基于体素的拓扑优化的3D模型进行高级平滑
- 作者：Antonio Bacciaglia;Alessandro Ceruti;Alfredo Liverani
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Smoothing methods;
- Laplace equations;
- Three-dimensional displays;
- Solid modeling;
- Optimization;
- Shape;
- Topology;
27.Graded Gyroid Structures for Load Bearing Orthopedic Implants

机译：用于承载骨科植入物的分级陀螺结构
- 作者：Lorenzo Guariento;Francesco Buonamici;Antonio Marzola;Yary Volpe;Lapo Governi
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Lattices;
- Bones;
- Implants;
- Surface treatment;
- Metals;
- Geometry;
- Powders;
28.Machine-Learning Based Modelling for AM Processes

机译：基于机器学习的AM进程建模
- 作者：Hua Li
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Computational modeling;
- Data models;
- Powders;
- Microstructure;
- Metals;
- Predictive models;
- Feature extraction;
29.Tracking Additive Manufacturing Using Machine Vision

机译：使用机器视觉跟踪添加剂制造
- 作者：Lenning A. Davis IV;John S. Donnal;Michael D. M. Kutzer
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Cameras;
- Synchronization;
- Trajectory;
- Feature extraction;
- Image reconstruction;
- Hardware;
- Printers;
30.Producing High Precision Additive Manufacturing Parts by Direct Printing of NURBS Surfaces

机译：通过直接印刷NurBS表面生产高精度添加剂制造部件
- 作者：Hossein Gohari;Ahmad Barari
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Surface treatment;
- Solid modeling;
- Surface topography;
- Splines (mathematics);
- Surface reconstruction;
- Process control;
- Complexity theory;
31.3D Printable Pneumatic Valves for Rapidly Manufacturable Mechanical Ventilator Amid Covid-19 Outbreak

机译：3D Covid-19爆发的快速生产机械呼吸机的可打印气动阀
- 作者：Hossein Gohari;Dylan Bender;Ahmad Barari
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Fabrication;
- Valves;
- Surface treatment;
- Field-flow fractionation;
- COVID-19;
- Three-dimensional displays;
- Solid modeling;
32.Negative and Positive Effect of Giant Magnetoresistance in The Magnetically Ordered Sandwich

机译：磁性排序三明治中巨型磁阻的阴性和积极作用
- 作者：L.V. Dekhtyaruk;A.P. Kharchenko;Yu.O. Klymenko;Yu.O. Shkurdoda;Yu.M. Shabelnyk;O.V. Bezdidko;A.M. Chornous
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Magnetic multilayers;
- Metals;
- Giant magnetoresistance;
- Conductivity;
- Conductors;
- Magnetoresistance;
- Magnetic separation;
33.NAP 2020 Sponsors

机译：NAP 2020赞助商
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
34.Radiomodifying Effect of X-Ray Radiation on Microflora of Yogurts with Ultradisperse Powders of Beta vulgaris

机译：X射线辐射对叶片超声粉末酸奶微氯辐射的影响
- 作者：Maryna M. Samilyk;Anna O. Gelih;Oksana V. Kalinkevich;Natalia V. Bolgova;Igor V. Shelest;Yana V. Trofimenko;Yevgen Zinchenko;Vadim Chivanov;Aleksei Kalinkevich
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Powders;
- Dairy products;
- Radiation effects;
- Nanobioscience;
- Scanning electron microscopy;
- Biophysics;
- Vacuum technology;
35.Bio-functionalization of Electrospun Polymeric Nanofibers by Ti3C2Tx MXene

机译：Ti3C2TX mxene的电纺聚合物纳米纤维的生物官能化
- 作者：Sergiy Kyrylenko;Viktoriia Kornienko;Oleksiy Gogotsi;Oleksandr Oleshko;Maksym Kolesnyk;Oleg Mishchenko;Veronika Zahorodna;Vladimir Buranich;Alexander Pogrebnjak;Yulia Zozulia;Vitalii Balitskyi;Maksym Pogorielov;Ivan Baginskiy
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Biomembranes;
- Polymers;
- Microorganisms;
- Programmable logic arrays;
- Etching;
- Current measurement;
- Nanobioscience;
36.Crack Arresters Design for Fatigue Strength Improvement of Additively Manufactured Components

机译：裂缝避雷器设计疲劳强度改善含有瘾制造的部件
- 作者：Paolo Ferro;Stefano Rosso;Gianpaolo Savio;Roberto Meneghello;Filippo Berto;Seyed Mohammad Javad Razavi
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Fatigue;
- Stress;
- Shape;
- Geometry;
- Arresters;
- Three-dimensional printing;
- Conferences;
37.Correlation between the Value Granules Spin in Film Alloys Based on Fe and Ag and the Magnetic and Thermal Coefficients of Magnetic Resistance

机译：基于Fe和Ag的薄膜合金与磁阻的磁性和热系数之间的薄膜合金之间的相关性
- 作者：Ivan Yu. Protsenko;Larysa V. Odnodvorets;Maryna O. Shumakova;Anastasia Rylova
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Nonhomogeneous media;
- Iron;
- Scattering;
- Strain;
- Conductivity;
- Solids;
- Magnetic multilayers;
38.Doping Effect of Metal Cations on the Physicochemical Properties of Nanomagnetite

机译：金属阳离子对纳米磁石物理化学性质的掺杂效应
- 作者：O.M. Lavrynenko;O.Yu. Pavlenko;N.O. Dudchenko;O.B. Brik
- 会议名称：《IEEE International Conference on Nanomaterials: Applications and Properties》 | 2020年
- Metals;
- Ferrites;
- Nanoparticles;
- Steel;
- Saturation magnetization;
- Magnetic resonance imaging;
- Magnetometers;