首页>外文会议>其他>International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)

International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Surface Finishing of Plastic Injection Mold Steel with Ball Burnishing and Spherical Polishing Processes on a Machining Center

机译：在加工中心上进行球磨和球形抛光的注塑模具钢表面精加工
- 作者：Fang-Jung Shiou;Ju-Te Chiu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
2.A New Class of Structured Light Patterns for 3-D Imaging Systems

机译：用于3-D成像系统的新型结构光图案
- 作者：Y.-C. Hsieh
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- 3-D imaging systems;
- structured light patterns;
3.Influence of Casting Speed on Temperature and Flow Fields in Molten Pool during Twin-Roll Strip Casting Process

机译：双辊带钢连铸过程中铸造速度对熔池温度和流场的影响
- 作者：X.M. Zhang;Z.Y. Jiang;X.H. Liu;G.D. Wang;L.M. Yang;A.K. Tieu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- twin-roll strip casting;
- casting speed;
- temperature field;
- flow field;
- coupled flow and temperature;
4.A Hierarchical Self-organizing Neural Network for Automatic Wafer Defect Inspection

机译：用于晶圆缺陷自动检测的分层自组织神经网络
- 作者：Chuan-Yu Chang;Chia-Wei Chang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- self-organizing neural network;
- unsupervised learning;
- wafer defect inspection;
- automation;
5.Prognostics for ball bearing based on neural networks and Morlet Wavelet

机译：基于神经网络和Morlet小波的滚珠轴承预测
- 作者：Runqing Huang;Lifeng Xi;C. Richard Liu;Jay Lee
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- residual life prediction;
- morlet wavelet;
- self-organizing map;
- back propagation;
- ball bearing;
- prognostics;
6.Coordinated Motion Control of Large-Scale Transporter for Conveying Heavy Frame Components in Ship-Manufacturing

机译：船舶制造中重型框架部件的大型运输机的协调运动控制
- 作者：Yunhua Li;Liman Yang;Guilin Yang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- coordinated motion control;
- transporter;
- networked control system;
- contour accuracy;
7.A Molecular Dynamics Investigation into the Cooling Characteristics of Ni and Cu Alloys at High Pressure

机译：Ni和Cu合金高压冷却特性的分子动力学研究
- 作者：Ming-Horng Su;Hung-Chang Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- molecular dynamics simulation;
- nanostructure;
- glass transition;
- high pressure;
8.Manufacturing of Cardiac Models Through Rapid Prototyping Technology for Surgery Planning

机译：通过快速原型技术为手术计划制造心脏模型
- 作者：Yih-Lin Cheng;Shyh-Jye Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- rapid prototyping (RP);
- cardiac models;
- surgery planning;
- image data processing;
- polymer jetting technology (PolyJet);
9.PID Tuning Rules for First-order Plus Integrator Systems

机译：一阶加积分器系统的PID调整规则
- 作者：Jing-Chung Shen;Huann-Keng Chiang;Wen-Yuh Jywe
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- bandwidth;
- PID controllers;
- tuning rules;
10.An Innovative Technology for Measuring The Dynamic Characteristics of Pressure Sensors

机译：测量压力传感器动态特性的创新技术
- 作者：H. Chang;M. J. Kao;T. T. Tsung;J. L. Wu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- pressure sensor;
- square-like pressure wave generator;
- spectrum analysis;
11.A CAD Idea of Braided Composite and Establishment of Its Relation Model

机译：编织复合材料的CAD思想及其关系模型的建立。
- 作者：Jiao Zongxia;Wang Xiaodong;Huang Guoping
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- braided composite;
- OOP;
- CAD;
- finite element;
- collaboration;
12.Control of Micro Press Using Magnetic Actuating Platform

机译：使用电磁驱动平台控制微型压力机
- 作者：C.L Chen;K.S.Li
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- plane motion system;
- electromagnetic actuator;
- nanoimprint;
13.Accelerated Life Testing Under Variable Synthetic Stresses for Hydraulic Pump

机译：可变综合应力下液压泵的加速寿命测试
- 作者：Shaoping Wang;Jian Shi
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- accelerated life testing;
- variable synthetic stresses;
- maximum likelihood estimation;
14.Kinematic and Dynamic Analysis for Closed-Loop Flexible Manufacturing Systems Using Nonlinear Recursive Method

机译：基于非线性递归方法的闭环柔性制造系统的运动学和动力学分析
- 作者：Yunn-Lin Hwang;Shen-Jenn Huang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- closed-loop;
- nonlinear recursive method;
- primary joint;
- secondary joint;
- open-loop;
15.A Novel Parallel Hybrid Motorcycle Transmission

机译：新型并联混合动力摩托车变速箱
- 作者：Kuen-Bao Sheu;Tsung-Hua Hsu;Yuan-Yong Hsu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- parallel hybrid transmission;
- CVT;
- motorcycle;
16.AN ALGORITHM FOR THE KINEMATIC DESIGN OF GEAR TRANSMISSIONS WITH HIGH REDUCTION RATIO

机译：高减速比齿轮传动的运动学设计算法
- 作者：Long-Chang Hsieh;Hsin-Sheng Lee;Teu-Hsia Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- kinematic design;
- planetary gear trains;
- train value equation;
17.An Intelligent Tool Post in a Lathe

机译：车床中的智能刀架
- 作者：C.L Wu;K.S.Wang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- intelligent tool post (ITP);
- normal cutting;
- abnormal cutting;
- threshold;
18.The influence of Serration on a Shaving Cutter with a Pre-Designed Relief Portion

机译：锯齿对带有预先设计的释放部分的剃须刀的影响
- 作者：Shinn-Liang Chang;Uei-Der Wu;Jen-Kuei Hsieh;Ching-Huan Tseng;Shi-Duang Cheng;Kuang-Rong Chang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- shaving cutter;
- serration;
- hob cutter;
- finite element method;
19.Automatic Inspection of Pipe using Non-contact Guided-wave Technique with Enhanced Mode-selectivity

机译：使用非接触式导波技术增强模式选择性的管道自动检查
- 作者：Kyung-Young Jhang;Hyun-Mook Kim
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- pipe;
- automatic inspection;
- guided-wave technique;
- laser ultrasonic;
- mode-selectivity;
20.A Theoretical and Experimental Study on Precision Controlling of Generated Path of an Elastic Linkage

机译：弹性连杆机构生成路径精度控制的理论和实验研究
- 作者：JianQinLiu;Ce Zhang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- elastic linkage;
- generated path;
- experimental study;
- optimal method;
21.Simulation and Analysis for Layout of Aerospace Sheet Metal Process with Lean Concept

机译：精益概念的航空航天钣金工艺布局模拟与分析
- 作者：Chikong Huang;Hsien-Ming Chang;Chia-Hui Lin
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- lean production;
- job shop;
- cellular manufacturing;
- sheet metal process;
- simulation;
22.An Investigation of Nanoscale Tribological Characteristics for Different Geometrical Sliding Systems

机译：不同几何滑动系统的纳米级摩擦学特性研究
- 作者：Y.R. Jeng;C.C. Su;C. M. Tan
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- tribological behavior;
- nanoscale sliding;
- FEM;
- MD;
23.A Kalman Filter-based Automatic Rotor Dynamic Balancing Scheme for Electric Motor Mass Production

机译：基于卡尔曼滤波器的电动机批量生产自动转子动平衡方案
- 作者：Chyuan-Yow Tseng;Ting-Wei Shih;Jun-Tsun Lin
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- dynamic balancing;
- influence coefficient method;
- motor armature;
- kalman filter;
24.Effect of loading rate on the delamination behavior of carbon/epoxy laminated composites

机译：加载速率对碳/环氧层压复合材料脱层行为的影响
- 作者：S.R. Ha;K.Y. Rhee;H.J. Kim;D.H. Jung
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- loading rate;
- carbon/epoxy composites;
- hydrostatic pressure;
- fracture toughness;
25.Joint Design and Fabrication for Mechanical Elastic Self-deformation Micro-assembly Technology

机译：机械弹性自变形微组装技术的联合设计与制造
- 作者：Chia-Lung Kuo;Jing-Dae Huang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- micro-EDM;
- micro-rotor;
- micro-assembly;
- elastic self-deformation;
26.Laser Cutting Quality of the Ceramic Slabs

机译：陶瓷板的激光切割质量
- 作者：X.Y. Wang;W.J. Xu;R.K. Kang;Y.D. Liang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- laser cutting;
- cutting quality;
- ceramic material;
27.Finite Element Analysis of the Hydro-mechanical Punching Process

机译：液压机械冲孔过程的有限元分析
- 作者：J. H. Yoon;H. Huh;Y. S. Lee;S. S. Kim;E. J. Kim;H. J. Park;T. H. Choi;H. J. Lee
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- hydro-mechanical punching;
- ductile fracture criterion;
- punching analysis;
- hydrostatic pressure;
28.Effects of Human Factors on Performance of Advanced Manufacturing Technology: an Empirical Examination

机译：人为因素对先进制造技术性能的影响：一项实证检验
- 作者：J.B. Song;D.S. Dai;D.B. Wang;Y.Q. Song
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- advanced manufacturing technology (AMT);
- implementation effects;
- human factors;
29.Size Effects on Sheet-Metal Formability for Miniature Parts

机译：尺寸对微型零件的钣金成形性的影响
- 作者：Quang-Cherng Hsu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- size effect;
- sheet-metal forming;
- miniature part;
- strain analyzer;
- stainless steel;
30.A Finite Element Analysis for the Forging Process of Hollow Spur Gear

机译：空心圆柱齿轮锻造过程的有限元分析
- 作者：T. S. Yang;Y.C. Hsu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- forging;
- finite element analysis;
- hollow spur gear;
31.The Hydroforming of Micro-square Tubes With Non-equal Section and Dendritic Shape

机译：截面不均等且树枝状的微型方管的液压成型
- 作者：Y. C. Hsu;T. S. Yang;J. L. Wu;Y. X. Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- hydroforming;
- micro-forming;
- square tube;
- finite element simulation;
32.Effect of Process Parameters on Forming Limits based on Fracture Energy Diagram in Coid Forging

机译：工艺参数对成形锻造极限的影响
- 作者：Shui-To Wang;Rong-Shean Lee
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- fracture energy diagram;
- forming limit;
- cold forging;
33.Predictions of the Minimum Amounts of Preforming in the Radial Extrusion of Tubular Components

机译：管状部件径向挤压中的最小预成型量的预测
- 作者：F. C. Lin;S. Y. Lin
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- relative depth of die cavity;
- minimum amount of preforming;
- radial extrusion;
34.Influence of Die Material upon Formability and Galling of Hot-dip Galvanized Steel Sheets

机译：模具材料对热浸镀锌钢板成形性和磨损的影响
- 作者：Yuli Lin;Hshah-Shun Li;Hou-Sheng Hwang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- formability;
- coefficient of friction;
- dome height at failure;
- hot-dip galvanized steel sheet;
- effect of galling;
35.Application of Streamline Method and ANFIS for Determination of Anisotropic Optimal Blank in Cylindrical Cup Drawing

机译：流线法和ANFIS在确定圆柱杯形图各向异性最佳坯料中的应用
- 作者：Fung-Huei Yeh;Ming-Tsung Wu;Yuung-Hwa Lu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- cylindrical cup drawing process;
- streamline method;
- adaptive neuro-fuzzy inference systems;
- optimum blank;
36.Computer Modeling of Extrusion by the Rigid-Plastic Hybrid Element Method

机译：刚性-塑性混合单元法的挤出计算机建模
- 作者：Y.-M. Guo
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- rigid-plastic domain-BEM;
- rigid-plastic FEM;
- hybrid element method;
- metal forming;
37.A 3D Slab Method in Cold Strip Rolling

机译：冷轧带钢的3D板坯方法
- 作者：Hongbin Ren;A. Kiet Tieu;Cheng Lu;Giovanni DAlessio
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- cold rolling;
- 3D slab method;
- edge drop;
- profile;
38.Modelling of Friction Coefficient in Cold Strip Rolling

机译：冷轧带钢摩擦系数建模
- 作者：A.K. Tieu;H.T. Zhu;C. Lu;C. You;Z.Y. Jiang;G. D Alessio
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- friction;
- cold rolling;
- optimization;
- neural network;
39.Modelling of the Development of Initial Crack under Hot Rolling Condition

机译：热轧条件下初始裂纹发展的建模
- 作者：Jiahning Tang;A. Kiet Tieu;Zhengyi Jiang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- modelling;
- FEM;
- hot rolling;
- oxide scale;
- crack;
40.A Study on Rotating Compression Forming of Ring Based on the Upper Bound Method

机译：基于上限法的环的旋转压缩成形研究
- 作者：H. H. Hsu;G. Y. Tzou
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- upper bound;
- rotating compression forming;
- spiral lead;
41.Polishing Glass-ceramic Based Rigid Disk

机译：抛光玻璃陶瓷刚性盘
- 作者：S. Y. Chen;S. C. Lin;H. Hocheng
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- polishing;
- glass;
- ceramic;
- rigid disk;
42.Chemical-Assisted Mechanical Polishing of Diamond Film on Wafer

机译：晶圆上金刚石膜的化学辅助机械抛光
- 作者：H. Hocheng;C. C. Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- diamond film;
- polishing;
- surface roughness;
- material removal rate;
43.The inverse prediction of the geometry of a two Dimensional plate with a rectangular cavity

机译：具有矩形腔的二维板的几何形状的逆预测
- 作者：Chin-Ru Su;Chao-Kuang Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- inverse problem;
- inverse heat conduction;
- unknown boundary;
- virtual area;
44.An Interactive Web-Based Learning System for Manufacturing Technology Education

机译：基于交互式Web的制造技术教育学习系统
- 作者：Min Jou;Han-Wei Zhang
- 会议名称：《》 | 2006年
- machining processing planning;
- interactive web-based learning system;
- virtual laboratory;
- learning agent;
45.Performance Measurement of Implementing Manufacturing Execution System

机译：实施制造执行系统的绩效评估
- 作者：Kai-Ying Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- performance measurement;
- manufacturing execution system;
- analytic hierarchy process;
46.Optimization of Component Placement Scheduling for SMT Assemblies

机译：SMT组件的零件放置计划的优化
- 作者：C. H. Kuo;M. D. Jeng;J. J Wing;T. H. Wang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
47.An Upper Bound Solution for Upsetting of Two-Layer Cylinder

机译：两层气缸Up粗的上界解决方案
- 作者：G.-Y. Tzou;S. Alexandrov
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- plastic piece-wise homogeneous materials;
- limit load;
- upsetting;
- singular solutions;
48.The optimum selection of a parting line for an injection mould using FEM database management and application techniques

机译：使用FEM数据库管理和应用技术对注塑模具的分型线进行最佳选择
- 作者：J.C. Lin;S.Y.Lin;K.S. Lee;Ming-Fang Lu;Chiaming Yen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- parting line;
- abductive network;
- simulation annealing (SA);
49.Spiral-Layer Machining for Making Thin-Wall Structures

机译：用于制造薄壁结构的螺旋层加工
- 作者：Millan K. Yeung;Peter Orban
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
50.Development of Manufacturing Strategy- Influence of Technology orientation and Customer orientation: An Empirical Study Approach

机译：制造策略的发展-技术导向和客户导向的影响：实证研究方法
- 作者：Ming-Lang Tseng;Jiu-Hsiang Chiang;Anthony SF Chiu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
51.A New Knowledge Discovery Model for Extracting Diagnosis Rules of Manufacturing Process

机译：提取制造过程诊断规则的新知识发现模型
- 作者：Ying-Chieh Tsai;Ching-Hsue Cheng;Jing-Rong Chang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- feature selection;
- modified minimum entropy principle;
- data mining;
- fuzzy sets;
- rough sets;
52.Study of Hole-Machining on Pyrex Wafer by Electrochemical Discharge Machining (ECDM)

机译：电化学放电加工（ECDM）在耐热硅晶片上进行孔加工的研究
- 作者：Yunn-Shiuan Liao;Wen-Yang Peng
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- electrochemical discharge machining;
- ECDM;
- biological chips;
- pyrex wafer;
- micro fluidic channels;
- bonding process;
53.Study on Thin Diamond Wire Slicing with Taguchi method

机译：田口法切细金刚石丝的研究
- 作者：Pei-Lum Tso;Bo-Huei Yan;Chan Hsing Lo
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- free abrasives;
- diamond wire slicing;
- taguchi method;
- analysis of variance;
54.Precision-limit Positioning of a Linear Motor Nano Drive System

机译：直线电机纳米驱动系统的精度极限定位
- 作者：Chen Hsieh;Ji-Lung Lin;Jen-Chiou Huang;Chih-Hong Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- precision-limit positioning;
- static friction;
- pre-sliding motion;
- linear motor;
- nano technology;
55.Design, Fabrication and Study of Micro-Electrospray Chips

机译：微电喷涂芯片的设计，制作与研究
- 作者：Tzong. Shyng. Leu;Chi-Hsiung Teng
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- electrospray;
- microfluidics;
56.Surface Finish in Machining of Dental Ceramics

机译：牙科陶瓷加工中的表面光洁度
- 作者：H. Hocheng;S. Y. Lin;W. T. Lei
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- surface roughness;
- dental ceramics;
- diamond abrasives;
- machining;
57.Combination of Spray Forming and Metal Powder Productions by the Internal Mixing Atomizer with a Substrate

机译：内部混合雾化器与基材的喷射成形与金属粉末生产相结合
- 作者：Muh-Rong Wang;Pin-Jen Chen;Je-Rei Yang;Jin-Shen Chiu;Tien-Chu Lin;Teng-Sun Lai
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- gas atomization;
- spray forming;
- metal powder;
- internal-mixing;
- substrate;
58.Vehicle Clustering Phenomenon in Automatic Materials Handling Systems in 300mm Semiconductor Manufacturing

机译：300mm半导体制造中自动材料处理系统中的车辆聚集现象
- 作者：Da-Yin Liao
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
59.Approximating the Minimum-Bounding Box of a 3D Model with Minimum Spans for Flush Edges

机译：近似3D模型的最小边界框和齐平边的最小跨度
- 作者：Tzung-Han Lin
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- minimum-bounding box;
- rapid prototyping;
- convex hull;
60.Diagnosability of Semiconductor Manufacturing Equipment

机译：半导体制造设备的可诊断性
- 作者：Y. L. Wen;M. D. Jeng;Y. S. Huang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- fault diagnosis;
- petri nets;
- linear programming;
- semiconductor manufacturing;
61.Design and Implementation of Emulators for a Real-world Automated Manufacturing Systems Using Scenario

机译：使用场景的现实世界自动化制造系统仿真器的设计和实现
- 作者：Yi-Sheng Huang;Ta-Hsiang Chung;Yuan-Lin Wen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- petri nets;
- automated manufacturing systems;
- scenario;
- emulator;
62.Preparation and Characterization of the Modified Carbon Nanotubes Enhanced Epoxy Resin Composites

机译：改性碳纳米管增强环氧树脂复合材料的制备与表征
- 作者：Kuang-Chyi Lee;Hsin Her Yu;Shug-June Hwang;Ye-Shiu Li;Min-Hsun Cheng;Chien-Chang Lin
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- multi-walled carbon nanotubes (MWNTs);
- epoxy resin;
- electric conductivity;
63.Elastic Buckling Analysis of Die Fins during Extrusion

机译：挤压过程中模翅片的弹性屈曲分析
- 作者：Yeong-Maw Hwang;Chi-Yu Wu;Ging-lan Shin
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- extrusion;
- cantilever beam;
- elastic buckling;
- CPU heat sink;
64.Micro fabrication design of a planar methanol sensor

机译：平面甲醇传感器的微制造设计
- 作者：Shu-hao Liang;Chuen-horng Tsai;Chaug-liang Hsu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- sensor;
- direct methanol fuel cells;
- MEMS;
65.Performance Analysis of a Novel 6-DOF Parallel-Kinematics Machine with Decoupled Motion Characteristics

机译：具有解耦运动特性的新型六自由度并联运动机的性能分析
- 作者：Guilin Yang;Yunhua Li
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- parallel-kinematics machine;
- instantaneous kinematics;
- performance analysis;
66.Comparison study of Contouring Control Systems

机译：轮廓控制系统的比较研究
- 作者：C. C. Peng;C. L. Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- multi-axis;
- stage;
- contour;
- contouring control;
67.Tracking Control of Automatic Pipe Cutting Robot with Magnetic Binder

机译：磁力管自动切管机器人的跟踪控制
- 作者：Sungsoo Rhim;Soon-Geul Lee
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- automatic pipe cutting;
- wheeled robot;
- learning control;
- magnetic binder;
68.Effect of Process Parameters on Coating Quality in Surface Coating Processes

机译：工艺参数对表面涂层工艺中涂层质量的影响
- 作者：Min Jou;Cheng-Chan Lo
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- coating technology;
- electrode;
- surface roughness;
- capacitor;
- stability;
69.Stability Analysis of the New Repetitive Learning Controller for Cutting Systems

机译：新型切削系统重复学习控制器的稳定性分析
- 作者：Ming-Guo Her;Jih-Ming Chen;Ming-In Ho
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- learning;
- repetitive;
70.Developing a Moving-Coil Actuator for Nano-imprint Lithography System

机译：开发用于纳米压印光刻系统的动圈驱动器
- 作者：Jyh-Chyang Renn;Yi-An Yang;Cherng-Shyong Chan
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- moving-coil actuator;
- nano-imprint lithography;
- electromagnetics;
- finite element method;
- state-space;
71.3D Model-Based Design for Control of a Mechatronic Machine Tools System

机译：基于3D模型的机电一体化机床系统控制设计
- 作者：Chin-Yin Chen;Chi-Cheng Cheng
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- machine tools;
- integrated structure and control design;
- design for control;
- multilevel decomposition;
72.Study on Eccentricity and Minimum Geometrical Center distance of the Eccentric Involute Gears Transmission

机译：渐开线齿轮的偏心距和最小几何中心距的研究
- 作者：Jiguang Han;Guicheng wang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- eccentric involute gears;
- pressure angle;
- eccentricity;
- geometrical center distance;
- transmission ratio;
73.The Analysis and Modeling for Nutation Drives with Double Circular-Arc Helical Bevel Gears

机译：双圆弧斜齿轮锥齿轮传动的分析与建模
- 作者：Bing Gu;Ligang Yao;Guowu Wei;Yingjie Cai;J S Dai
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- nutation drive;
- helical bevel gear;
- double circular arc tooth profile;
- modeling;
74.Nondestructive Disassembly System for White Board Marker

机译：白板笔无损拆卸系统
- 作者：T-S Chang;Wen-Hsiang Hsieh;Y-A Hsieh;C-H Yang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- nondestructive method;
- product recovery;
- disassembly system;
- white board marker;
75.Deformation Characteristics of Wood Structures under Compression

机译：压缩状态下木结构的变形特征
- 作者：K. Yamaguchi;M. Otsubo;Y. Motomura;Y. Marumo;H. Shiozaki;T. Kawase
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- wood;
- cell and layer structure;
- deformation mode;
- heat treatment;
- compressive process;
76.Reliability study of cutting tool based on the reliability-dependent hazard rate function

机译：基于可靠性相关危险率函数的刀具可靠性研究
- 作者：Wei-Shin Lin
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- reliability;
- normalization treatment;
- reliability-dependent;
- hazard rate function;
77.A deterministic model for a manufacture system with an advance purchase discount

机译：具有预购折扣的制造系统的确定性模型
- 作者：Peng Sheng You;Chun Ming Su
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- production;
- pricing;
- advance sales;
78.Creative Design of Metal Can Crushers with Eight Links

机译：八连杆金属制罐破碎机的创意设计
- 作者：Wen-Hsiang Hsieh;T-S Chang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- can crusher;
- creative design;
- toggle position;
- metal can;
79.Geometric Design of the Pinion with Two Circularly Arrayed Cylindrical Teeth for Roller Drives

机译：带有两个圆形排列圆柱齿轮的小齿轮的几何设计
- 作者：T. S. Lai
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- roller drives;
- geometric design;
- cycloid drives;
- planetary gear trains;
80.Constraint-based Multidisciplinary Collaborative Design Method of Gear Drive

机译：基于约束的齿轮传动多学科协同设计方法
- 作者：Liang Chen;Chenghui Gao;Guodong Jin
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- collaborative design;
- multidisciplinary design;
- constraint satisfaction;
- gear drive;
81.A Simple Parameter Calibration Method for a Novel Controllable Mechanical Metal Forming Press

机译：一种新型可控机械金属成形压力机的简单参数标定方法
- 作者：Kai He;R. Du
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- parameter calibration;
- controllable mechanical press;
- accuracy;
82.Geometry Modeling for Indexing Cams Based on Screw Theory and Product of Exponential Formula

机译：基于螺杆理论和指数乘积的分度凸轮几何建模
- 作者：Zongyu Chang;Yuhu Yang;Ce Zhang;Shoubin Ding;Bin Zhang;Dengshan Tan;Chuntao Zhu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- indexing cam mechanism;
- screw theory;
- exponential product formula;
83.Autoresonant Tuning and Control in Ultrasonic Vibration Assisted Drilling Process

机译：超声振动辅助钻井过程中的自共振调谐与控制
- 作者：Y.C. Chen;Y.S. Liao;J.D. Fan
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- ultrasonic vibration assisted drilling;
- resonance;
- auto-tuning;
- voltage controller;
84.The use of the Taguchi-Grey based to optimize high speed end milling with multiple performance characteristics

机译：使用Taguchi-Grey来优化具有多种性能特征的高速立铣刀
- 作者：S. J. Hwang;Y. L. Hwang;B. Y. Lee
- 会议名称：《》 | 2006年
- optimization;
- high speed machining;
- tool life;
- surface roughness;
85.Ultrasonic Welding of Aluminum and Silicon Wafer

机译：铝和硅晶片的超声波焊接
- 作者：Kuen Ming Shu;Hung Rung Shih
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- ultrasonic welding;
- aluminum wire;
- silicon wafer;
86.Ultrasonic Aided Electrical Discharge Grinding of Hard Materials Using A Metal Matrix Composite Electrode

机译：使用金属基复合电极对硬质材料进行超声辅助放电研磨
- 作者：Hung Rung Shih;Kuen Ming Shu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- ultrasonic aided electrical discharge grinding;
- Cu/SiC_p composite;
- Material removal rate;
- surface roughness;
87.The Effect of Spindle Speed Variation on Chatter Suppression in Rotating-Tool Machining

机译：主轴转速变化对旋转刀具加工中颤振抑制的影响
- 作者：C.-J. Li;A.G. Ulsoy;W.J. Endres
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- chatter suppression;
- spindle speed variation;
- rotating-tool machining;
- rotating-frame approach;
88.A Pulse DC Plasma Deposited Resistor Process

机译：脉冲直流等离子体沉积电阻器工艺
- 作者：Fuhliang Wen;Y.-L Lo;C.-H. Lin;S.-C. Mou
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- pulse DC plasma;
- sputtering;
- deposited process;
- resistor;
89.A Study of Optimum Blank in the Deep Drawing Process of Square Cup with Flange by Using Adaptive Network Fuzzy inference System

机译：基于自适应网络模糊推理系统的带法兰方形杯拉深最佳坯料的研究。
- 作者：Ching-Lun Li;You-Min Huang;Yi-Wei Tsai
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- deep drawing;
- streamline method;
- optimum blank;
- ANFIS;
90.Constructing the Predictive Models of Friction Coefficient Using Cylindrical Compression Testing

机译：利用圆柱压缩试验建立摩擦系数的预测模型
- 作者：Y. C. Hsu;T. S. Yang;S. Y. Sung;S. Y. Chang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- friction;
- bulging;
- finite element simulation;
- neural network;
91.Identification of Plasticity Parameters of Metallic Coatings by means of Depth-Sensing Micro-Indentation

机译：深度感应微压痕识别金属涂层的塑性参数
- 作者：H. Hamasaki;F. Yoshida
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- micro-indentation;
- material parameter identification;
- coating;
- inverse analysis;
92.Prevention of Seizure in Deep Drawing Using Plastic Die

机译：防止使用塑料模进行深冲的咬死
- 作者：Y. Harada;T. Murao;K. Mori;N. Tsuchida;K. Fukaura
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- deep drawing;
- plastic die;
- aluminum cup;
- titanium cup;
- seizure;
- wear resistance;
93.Fatigue Life Prolongation of Carburized Steel By Means of Shot-Peening

机译：喷丸强化渗碳钢的疲劳寿命
- 作者：Shigeyoshi Haga;Yasunori Harada;Harushige Tsubakino
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- fatigue life;
- microstructure;
- steels and shot-peening;
94.Springback Behavior of an Invar Sheet and Its Perforated Form

机译：因瓦板材及其穿孔形式的回弹行为
- 作者：Yi-Che Lee;Fuh-Kuo Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- invar sheet;
- perforated form;
- springback;
- theoretical model;
- warm forming;
- v-bending test;
95.Experimental Research on Grind-Hardening of 65Mn Steel

机译：65Mn钢的磨削强化实验研究
- 作者：J.D. Liu;G.C. Wang;Z. Wang;S.T.Fan
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- grinding;
- surface hardening;
- microstructure;
- micro-hardness;
- hardened layer depth;
96.Using Borer-Shape Electrode in Electrochemical Smoothing of Hole

机译：使用Borer形电极进行孔的电化学平滑
- 作者：P.S. Pa;H. Hocheng
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- electrode design;
- electrochemical smoothing;
- electrobrightening;
- feeding electrode;
97.The Characteristic of Abrasive Particle in Chemical - Mechanical Polishing

机译：化学-机械抛光中磨料颗粒的特性。
- 作者：H. J. Tsai;C. C. Chang;Y. R. Jeng;S. L. Chen
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- CMP;
- grain collision;
- abrasive particle;
- wafer-pad;
- remove rate;
98.The Optimal Cutting-Parameter Design of Heavy Cutting in Side Milling for SUS304 Stainless steel

机译：SUS304不锈钢侧面铣削重切削的最优切削参数设计
- 作者：Ching-Kao Change;H. S. Lu
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- side milling;
- grey relational analysis;
- optimization;
- heavy cutting;
99.Model Support Algorithm in Powder Based Three Dimensional Printer

机译：基于粉末的三维打印机中的模型支持算法
- 作者：Wei-Hsiang Lai;Chun-I Cheng;Mon-U Huang;Hsiu-Ming Chang
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- 3D printer;
- rapid prototyping;
- RP;
- model support;
- powder based;
100.Optimization of Parameters Affecting Tool Wear in Titanium Acetabulum Cup Forging

机译：钛臼杯锻件影响刀具磨损的参数优化。
- 作者：Rong-Shean Lee;Jin-Long Jou
- 会议名称：《International Conference on Advanced Manufacture; 20051128-1202; Taipei(CT)》 | 2006年
- optimization;
- tool wear;
- acetabulum cup;
- taguchi method;
- alpha-beta phase;