首页>外文会议>其他>Powder Metallurgy World Congress & Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)

Powder Metallurgy World Congress & Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.The Application of Different NDT Processes for Automotive PM Components

机译：不同无损检测工艺在汽车永磁部件中的应用
- 作者：Eberhard Ernst;Ian Donaldson
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
2.The Application of Porous Products of Spherical Titanium Powder in implant Surgery

机译：球形钛粉多孔产品在植入手术中的应用
- 作者：K.E. Beljavin;V.K. Sheleg;D.V. Minko
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
3.The Development of a Cobalt-Free Exhaust Valve Seat Insert

机译：无钴排气阀座嵌件的开发
- 作者：Akira FUJIKI;Mitsushi OYANAGI;Tomonori MIYAZAWA;Hiroki FUJITSUKA;Hideaki KAWATA
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
4.The Development of Powder Consolidated Components for the Gas Turbine Engine

机译：燃气轮机粉末固结件的研制
- 作者：Wayne Voice;Mark Hardy;David Rugg
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
5.The Effect of Process Parameters on the Ejection of Powder Compacts

机译：工艺参数对粉末压块喷射的影响
- 作者：D T Gethin;D Korachkin;JH Tweed;DMM Guyoncourt
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
6.Extending the Scope of Material Properties for Direct Metal Laser Sintering

机译：扩大直接金属激光烧结的材料性能范围
- 作者：Frank Petzoldt;Haiko Pohl;Abdolreza Simchi
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
7.Engineering the Green State of Powder Products

机译：设计粉末产品的绿色状态
- 作者：David Whittaker;I T Chang;M.S.A. Bradley;A.F.C. Cocks;H.W. Chandler;P. J. Withers;J. Binner;S. George
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
8.Direct Metal Laser Sintering of Titanium Alloy

机译：钛合金的直接金属激光烧结
- 作者：Haiko Pohl;Frank Petzoldt;Masaki Terada;Eisaku Kakiuchi;Isaka Kanazawa
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
9.Discrete Element Modelling of the Unloading and Failure of Green Compacts

机译：压坯卸载和破坏的离散元建模
- 作者：C. L. Martin;D. Bouvard
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
10.Development of the Sintered Mechanical Fuse for Compressors of Car Air Conditioners

机译：汽车空调压缩机烧结机械保险丝的研制
- 作者：Takashi Suzuki;Tadayuki Tsutsui;Kei Ishii;Akira Kishibuchi;Kunihiro Kodama;Kouji Yamada
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
11.Development of Sintered Fe-Al Material for Valve Seat

机译：阀座用烧结铁铝材料的开发
- 作者：T. NISHITA;K. HANATA
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
- SINTER;
- Fe-Al;
- VALVE SEAT;
- WEAR RESISTANCE;
12.Die Compaction Simulation: Routes to Sustainability

机译：压模仿真：实现可持续发展的途径
- 作者：Peter Brewin;Luc Federzoni
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
13.High Performance Gears

机译：高性能齿轮
- 作者：Linnea Forden;Sven Bengtsson;Magnus Bergstroem
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
14.Hot Explosive Consolidation of Clad W-Cu Composition Powders

机译：钨-铜复合粉的热爆炸固结
- 作者：Akaki Peikrishvili;Laszlo Kecskes;Levan Japaridze;Nikoloz Chikhradze;Merab Tsiklauri;Naziko Dalakishvilix
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
15.Identification Models of Powder Densification using in situ HIP Dilatometer

机译：原位HIP膨胀计的粉末致密化识别模型
- 作者：J.P. Fondere;L. Federzoni;H. Burlet;G. Raisson
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
16.Fracture Toughness Measurements of Powder Metallurgical (P/M) Green Compacts

机译：粉末冶金（P / M）生坯的断裂韧性测量
- 作者：C.C. Degnan;A.R. Kennedy;P.H. Shipway
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
17.Evolution of the Top Surface Temperature of Spray Formed Billet

机译：喷铸坯顶表面温度的演变
- 作者：Hua Ye;Udo Fritsching;Klaus Bauckhage
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
18.Industrial Applications for Tool Steel Alloys Processed by Spray Forming

机译：喷射成形加工工具钢合金的工业应用
- 作者：Peter Kjeldsteen
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
19.Innovative PM + HIP Route for the Production of Glass Moulds

机译：用于玻璃模具生产的创新PM + HIP路线
- 作者：Michel Pierronnet;Jean-Yves Moraux;Gerard Raisson
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
20.Metal Printing Process-Development of a New Rapid Manufacturing Process for Metal Parts

机译：金属印刷工艺-金属零件快速制造新工艺的开发
- 作者：Casper van der Eijk;Roald Karlsen;Olav Asebo;Terje Mugaas;Oyvind Koines;Rune Skjevdal;Zuhair Sallom
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
21.Laser Re-melting of Prealloyed Steel Powders to High Density

机译：预合金钢粉的激光重熔至高密度
- 作者：CS Wright;SP Akhtar;M Youseffi;C Hauser;THC Childs;J Xie;P Fox
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
22.Binder Technology for Large Metal Parts Produced using Three-Dimensional Printing

机译：三维印刷生产的大型金属零件的粘合剂技术
- 作者：Jianxin Liu;Howard Kuhn;Mike Rynerson;Stephane Morvan
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
23.Comparison of Disk and Pipe Porous Aerators Properties of Sewage and Potable Water Purification Systems made from Titanium Sponge Powder

机译：钛海绵粉制成的污水和饮用水净化系统的盘式和管式多孔曝气器性能比较
- 作者：V.V.Savich;L.P.Pilinevich;M.V.Tumilovich;A.M.Taraikovich
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
24.Analysis of Powder/Tool Friction in Closed Die Test

机译：闭模试验中粉末/工具摩擦的分析
- 作者：P. DOREMUS;M. SHTERN;A. COCKS;D. GUYONCOURT;J. TWEED;M. D. RIERA;J. M. PRADO;P. BREWIN
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
25.Developments in the Automotive Supply Chain and their Impact on the European Powder Metallurgy Industry

机译：汽车供应链的发展及其对欧洲粉末冶金行业的影响
- 作者：Enrico Morgano
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
26.Development of Die Wall Lubricated Automotive Engine Sprockets

机译：模具壁润滑汽车发动机链轮的开发
- 作者：Toru Moriya;Naoki Miyakawa;Hidekazu Satou;Eisuke Hoshina;Mikio Kondo
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
27.A New Process For Making High Density Parts

机译：制造高密度零件的新工艺
- 作者：F. J. Semel
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
28.Effect of Cooling Rate on the Structure of Liquid-Phase-Sintered W-27.8Mo-22.5Ni-10.6Fe Alloy

机译：冷却速率对液相烧结W-27.8Mo-22.5Ni-10.6Fe合金组织的影响
- 作者：Kuan-Hong Lin;Chen-Sheng Hsu;Shun-Tian Lin
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
29.Defect Detection in PM Materials using Non-Destructive Testing

机译：使用非破坏性测试检测PM材料中的缺陷
- 作者：Morato;Joan;Montoliu;R.;Pinar;M.
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
30.Development of 2014-Al Alloy Based SiC_p Particulate Reinforced Composites by Spray Co-deposition Process

机译：喷涂共沉积工艺开发2014铝合金基SiC_p颗粒增强复合材料
- 作者：V.C.Srivastava;A. Schneider;V. Uhlenwinkel;K. Bauckhage
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
31.Controlled Porosity Levels in PM Stainless Steel Tooling

机译：PM不锈钢模具中的可控制孔隙度
- 作者：David J. Novotnak;Louis W. Lherbier
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
32.Calculations And Experimental Studies on In Situ TiC

机译：原位TiC的计算与实验研究
- 作者：S. Weber;H. Berns
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
33.Analysis of Fatigue Strength of High Density P/M Materials by Extreme Value Statistics and Fracture Mechanics

机译：极值统计和断裂力学分析高密度P / M材料的疲劳强度
- 作者：Hitoshi Tanino;Toshiya Yamaguchi;Tsutomu Ushirozako
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
34.Analysis of Efficiency of Different Out-gassing Techniques for Capsules with Powder prior to HIP

机译：HIP之前采用粉末的不同排气技术的效率分析
- 作者：Evgeny Khomyakov;Vitaly Nepomnyatchy;Victor Samarov
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
35.Alternative Process for Consolidation of Aluminium Based Metallic and Metal Matrix Composite P/M Parts

机译：铝基金属和金属基复合材料粉末冶金零件的固结替代工艺
- 作者：S. Kleiner;O. Beffort
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
36.Spray Forming of Superalloy Rings

机译：高温合金环的喷涂成型
- 作者：Volker Uhlenwinkel;Ryan Attwater;Lydia Achelis;Michael Walter
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
37.Recent Developments in European Union EHS Legislation and their effect on the European PM Community

机译：欧盟EHS立法的最新发展及其对欧洲PM社区的影响
- 作者：Peter Brewin;Mike Morley
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
38.Numerical Simulation of Compacting of Powder Parts having Slant to a Pressing Direction Surfaces

机译：压制方向倾斜的粉末零件压实的数值模拟
- 作者：T.Yepifantseva;O.Mikhailov
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
- powder compaction;
- pressing diagram;
- numerical simulation;
- finite element analysis;
39.New Approaches for Synchronizer Rings by Utilizing Advantages of Different Technologies

机译：利用不同技术优势的同步环新方法
- 作者：Guenter Nelboeck;Karl Ammer;Helmut Pamminger
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
40.Moessbauer and XRD Study of Non-Stoichiometric Iron Aluminides formed by SHS Method

机译：SHS方法形成的非化学计量铝化铁的Moessbauer和XRD研究
- 作者：A Ilyuschenko;J Fedotova;T Talako;A Belyaev;A Letsko
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
41.Mechanical Properties of Porous Titanium Compacts Synthesized by Powder Sintering

机译：粉末烧结合成多孔钛合金的力学性能
- 作者：N. Nomura;S. Hanada
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
42.Mechanical Properties of Sintered and Cold-Forged Full Density Materials

机译：烧结和冷锻全密度材料的机械性能
- 作者：Naomichi Nakamura;Satoshi Uenosono;Masashi Fujinaga;Shin Koizumi;Hiroyuki Anma;Takashi Yoshimura
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
43.Quantitative Consideration, Systematic Investigations and Integration of all the Scientific and Technical Knowledge as Tools for Improving PM

机译：定量考虑，系统研究和所有科学技术知识的整合，作为改善PM的工具
- 作者：Yoshimoto Wanibe;Takashi Itoh;Seiji Yokoyama;Katsushi Kusaka
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
44.Quality Control on Green Bodies

机译：绿色机构的质量控制
- 作者：Gerhard Traxler;Christoph Steiger
- 会议名称：《》 | 2004年
45.Production and Properties of Dense Iron Based Parts produced by Laser Melting with Plasma Formation

机译：等离子形成激光熔炼致密铁基零件的生产及性能
- 作者：Marleen Rombouts;Ludo Froyen;Jean-Pierre Kruth;Jonas Van Vaerenbergh;Peter Mercelis
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
46.Pressure-dependent viscosity of PIM compounds

机译：PIM化合物的压力依赖性粘度
- 作者：Berenika Hausnerova;Radek Slezak;Tomas Sedlacek;Petr Saha
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
47.Predicting the Optimum Thickness of Powder Antifriction Layers in Bimetal Bearings

机译：预测双金属轴承中粉末减摩层的最佳厚度
- 作者：Khudoley A.L.;Goman A.M.
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
48.Poisson's Ratio of Sintered Materials for Structural Machine Parts 1st Report from JPMA Machine Parts Committee

机译：JPMA机械零件委员会的第一份报告，结构机械零件的烧结材料的泊松比
- 作者：N. Hirose;J. Asami;A. Fujiki;K. Oouchi
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
49.Particulate Models for Powder Compaction

机译：粉末压实的颗粒模型
- 作者：D T Gethin;RW Lewis;RS Ransing;XS Yang;RW Rowe
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
50.P/M Aluminium Structural Parts for Automotive Application

机译：汽车用P / M铝结构件
- 作者：Th. Schubert;T. Weissgaerber;B. Kieback;H. Balzer;H.-C. Neubing;U. Baum;R. Braun
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
51.Optimization and Finite Element Modelling of Powder Segregation during Metal Injection Moulding

机译：金属注射成型过程中粉末偏析的优化及有限元建模
- 作者：G. Ayad;A. Lejeune;T. Barriere;J.C. Gelin
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
52.X-Ray Microtomography Analysis of the Evolution of 3D Microstructural Characteristics during Sintering of a Copper Powder

机译：铜粉烧结过程中3D微结构特征演变的X射线显微照片分析
- 作者：A. Vagnon;J.P. Riviere;J.M. Missiaen;D. Bellet;M. Di Michiel;C. Josserond;D. Bouvard
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
53.Validation data for modelling of powder compaction: Guidelines and an example from the European DIENET project

机译：粉末压实建模的验证数据：欧洲DIENET项目的指南和示例
- 作者：JH Tweed;JA Calero;R Maassen;W Markeli;P Brewin
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
54.The Strain Rate Effect on Material Parameters of Porous Bodies during Axial Compression

机译：轴向压缩过程中应变率对多孔体材料参数的影响
- 作者：Lyudmila Ryabicheva;Yuliya Kravtsova
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
55.Titanium-Hydroxyapatite Sintered Composites Processing and Characterization

机译：钛羟基磷灰石烧结复合材料的加工与表征
- 作者：J.B. de Campos;M.V. de Oliveira;R.R. de Avillez;A.M. Rossi;L.C. Pereira
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
56.Study of the Densification Process and Mechanical Properties of Cr-Cu Composite, obtained by Sintering and Pressing

机译：烧结压制Cr-Cu复合材料的致密化过程及力学性能研究
- 作者：Homenko E.V.;Minakova R.V.;Laptev A.V.
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
57.Exploring the Origins of Anisotropy in Sintering

机译：探索烧结中各向异性的起源
- 作者：D. Bouvard;A. Zavaliangos;J. M. Missiaen
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
58.Direct Metal Laser Sintering - from Rapid Prototyping to Series Production

机译：直接金属激光烧结-从快速原型制作到批量生产
- 作者：Juha Kotila;Olli Nyrhilae;Tatu Syvaenen;Jouni Haenninen
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
59.Evaluation of Critical Pressure During Thermal Debinding

机译：热脱脂过程中的临界压力评估
- 作者：Chantal Binet;Rudolf Zauner;Donald Heaney
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
60.Green Body Homogeneity Effects on Sintered Tolerances

机译：生坯均质性对烧结公差的影响
- 作者：Randall M. German
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
61.FEM Analysis of Temperature, Stress and Strain in the Hot Extrusion of HSS Powders

机译：HSS粉末热挤压过程中温度，应力和应变的有限元分析
- 作者：C. Zubizarreta;M. Mendoza;S. Gimenez;I. Iturriza
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
62.Evolution of Gear Quality in Helical PM Gears during Processing

机译：螺旋永磁齿轮加工过程中齿轮质量的演变
- 作者：Lorenz S. Sigl;Guenter Rau;Pierluigi Zingale;Sven Bengtsson;Didier Caudebec
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
- PM gear;
- surface densification;
- transverse rolling;
- gear quality;
63.Influence of the Coarseness of Carbides on Mechanical Properties of Cold Work Tool Steels

机译：碳化物粗度对冷作工具钢力学性能的影响
- 作者：Inge Stene Osen
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
64.In-situ Investigation of the Sintering Behavior of Distaloy AE and Astaloy CrM

机译：Distaloy AE和Astaloy CrM烧结行为的原位研究
- 作者：S. Gimenez;G. Roebben;J. Vleugels;O. Van der Biest
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
65.Anisotropic Theory of Elasticity and Yield Condition for Non-Sintered Porous Bodies and Powders

机译：非烧结多孔体和粉末的各向异性弹性和屈服条件理论
- 作者：M.Shtern
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
66.An Accurate Model for Industrial P/M compaction

机译：工业P / M压实的精确模型
- 作者：S. Shamasundar;K. Narendra Babu
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
67.Algorithm of Selection the Powder Material Compositions From Empirical - Statistical Diagrams 'Composition- Properties'

机译：从经验-统计图“组成-性质”中选择粉末材料成分的算法
- 作者：Lyulko V.G.;Jmailov B.B.;Zakharova O.A.;Lebedev A.O.;Artamonov I.E.;Malofeeva S.A.
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
- powder materials;
- multicomponents;
- 3D/2D-Modelling;
- simplex diagram;
- mixture - property;
- service characteristics;
68.A new simulation methodology for PM surface densification process

机译：粉末冶金表面致密化过程的新模拟方法
- 作者：D. Bassan;M. Asti;M. F. Pidria;P. Zingale
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
69.A Simple Method of Relating Stereological Parameters Modelling Hard Metal Structures

机译：关联硬质合金结构建模参数的简单方法
- 作者：A.C. Buriti;A.G.P. da Silva;U.U. Gomes;C.P. de Souza
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
- hard metal;
- aspect ratio;
- computer simulation;
- composite;
70.3-D simulation of particle acceleration and heating under TBC plasma spraying

机译：TBC等离子喷涂下粒子加速和加热的3-D模拟
- 作者：S.P. Kundas;T.A. Kashko;D.V. Markovnik;O.P.Reut
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
71.Control of the Temperature Distribution in a Billet during Spray Forming for Minimising Distortion Potential

机译：控制喷涂过程中坯料中的温度分布，以最大程度地降低变形电势
- 作者：U. Fritsching;C. Cui;Z. Huang;A. Schulz
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
72.Copper and Carbon on Mechanical Properties of Iron -Carbon - Copper Alloys for PM Forging Applications

机译：铜和碳对粉末冶金锻造用铁碳铜合金力学性能的影响
- 作者：Edmond Ilia;Kevin Tutton;Mike ONeill
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
- connecting rods;
- powder forging;
- mechanical properties;
73.Computer Simulation of Die Compaction: Guidelines and An Example from the European Dienet Project

机译：模具压实的计算机模拟：欧洲模具网项目的准则和示例
- 作者：O. Coube;Y. Chen;D. Imbault;P. Doremus;L. Federzoni;Paer Jonsen;J. Tweed;D. Gethin;S. Rolland;A. Maydanyuk;M. Shtern
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
74.Computer Modelling of Pore and Particle Shape Change during Compaction of Powder Materials in a Rigid Die using Finite Element Method

机译：刚性模具中粉末材料压实过程中孔隙和颗粒形状变化的计算机建模
- 作者：V.M. Gorokhov;G.P. Ustinova
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
75.Behaviour of PM Synchroniser Rings vs Brass Rings

机译：PM同步器环与黄铜环的行为
- 作者：P Blanchard;G Laurent;C Durand;G Garlisi
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
76.An Experimental Investigation of Carbide/Austenite Equilibria in Commercial Tool Steels and High Speed Steels compared against Thermodynamic Calculations

机译：与热力学计算比较的商用工具钢和高速钢中碳化物/奥氏体平衡的实验研究
- 作者：Johan Bratberg;Karin Frisk
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
77.A Structural Model of Hot Deformation to Obtain Bimetal 'Steel-Bronze' with Powder Working Layer

机译：具有粉末加工层的双金属“钢-青铜”热变形的结构模型
- 作者：V.Yu.Dorofeyev;Yu.G.Dorofeyev
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
78.Adaptive control of process of powder materials sintering and surfacing by electric discharge

机译：粉末材料烧结及堆焊过程的自适应控制
- 作者：Klimentij Beljavin;Dmitry Minko;Oleg Kuznechik
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
79.Advanced Applications for Sintered Gears

机译：烧结齿轮的高级应用
- 作者：Christian Sandner;Johann Dickinger;Horst Roessler;Peter Orth
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
80.On the Local Contact Behaviour during Cold Compaction of Composite Powders

机译：复合粉末冷压过程中的局部接触行为
- 作者：Olle Skrinjar;Per-Lennart Larsson
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
81.New Ways of Products Constructing Using Porous Permeable with the Required Complex of Exploitation Parameters

机译：具有所需开采参数复合物的多孔渗透构造产品的新方法
- 作者：Sheleg;Valery;Leonov A N;Dechko M M
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
82.Non-Destructive Control of Porous Permeable Materials by the Computer Tomography Method

机译：计算机断层扫描方法对多孔渗透性材料的无损控制
- 作者：Leonov;Andrey;Artemyev;V M;Naumov;A O;Sheleg V K
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
83.Numerical Simulation of the Double-Step Pressing of a Simplified Gear

机译：简化齿轮双步挤压的数值模拟
- 作者：O. Coube;F. Andrieux;H. Riedel
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
84.Numerical simulation of powder filling processes using the particle finite element method

机译：粉末填充过程的有限元数值模拟
- 作者：J. Oliver;J.C. Cante;C. Gonzalez
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
85.Numerical Modelling of Powder Compaction Processes: Towards a Virtual Press

机译：粉末压实过程的数值建模：虚拟压机
- 作者：J.C. Cante;J. Oliver;C. Ferrari;J.A. Calero;F. Benitez
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
86.New Tool Steels Produced via Spray Forming

机译：通过喷涂成型生产的新型工具钢
- 作者：Thomas Hillskog;Odd Sandberg
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
87.Net Shaping of Powder Components by EPD-Sintering Technological Sequence

机译：通过EPD-烧结技术序列对粉末成分进行净成形
- 作者：E. A. Olevsky;X. Wang;J. Ma;A. Maximenko;M. B. Stern;B. M. Guenin
- 会议名称：《》 | 2004年
88.Modelling of a Process for Applying a Wear Resistant Coating

机译：施加耐磨涂层的过程建模
- 作者：Sosnovsky A.V.;Babushkin I. V.;Shirokij I.V.;Vitiaz A.A.
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
89.Modelling of PM Processes using Backpropagation Algorithm

机译：使用反向传播算法的PM过程建模
- 作者：Dragoljub Drndarevic;Milutin Djuricic;Stjepan Panic
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
90.Modelling and Numerical Simulation of Powder Die Compaction with a Particle Code

机译：粉末压模的颗粒编码建模与数值模拟。
- 作者：O. Coube;B. Henrich;M. Moseler;H. Riedel
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
91.Mechanical Properties of Warm Compacted/Sintered and Surface Densified Sprocket in Comparison to Warm Compacted and High Temperature Sintered Parts

机译：热压/烧结和表面致密链轮的机械性能与热压和高温烧结零件的比较
- 作者：Akira Fujiki;Yukihiro Maekawa;Yutaka Mabuchi;Mituhiro Satoh;Junichi Yamada
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
92.MELATO~reg; - A New Process Chain for Rapid Tool Manufacturing

机译：MELATO〜®-快速工具制造的新工艺链
- 作者：A. Techel;T. Himmer;S. Nowotny
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
93.Measurement of density variations in Compacted Parts and Filled Dies using X-ray Computerised Tomography

机译：使用X射线计算机断层摄影术测量压实零件和填充模具中的密度变化
- 作者：S.F. Burch;J.H.Tweed;A.C.F. Cocks;I.C Sinka;C. Y. Wu
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
94.Quality Testing in the Production Line using Acoustic Methods Selected Problems in Non-destructive Testing of Materials using Acoustic Analysis Techniques

机译：使用声学方法对生产线进行质量测试使用声学分析技术对材料进行无损检测的部分问题
- 作者：Horst G. Jonuscheit;Eberhard Ernst;Rainer Bitzer
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
95.Production and Properties of Oxide Dispersion Strengthened Metal-Matrix-Composite Powders for Thermal Spray Coatings

机译：用于热喷涂的氧化物弥散强化金属基复合粉末的生产及性能
- 作者：Erich Lugscheider;Jochen Zwick
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
96.Pressure - Density Relation for a Metallic Powder undergoing Die Compaction

机译：金属粉末压模的压力-密度关系
- 作者：M. Kupkova;M. Kupka
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
97.Preparation Technique of Gradient Structures Received with Updating of Metals and Alloys Surface with Energy Concentrated Streams (ECS)

机译：能量集中流更新金属和合金表面的梯度结构制备技术
- 作者：Krasnobaev Alexander;Lyulko V G;Kudrjakov O V;Lyulko A V;Barkov A V
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
98.Powder Injection Moulding of Femoral Implant Stems

机译：股骨植入物粉末注射成型
- 作者：Dmitriy Liksonov;Thierry Barriere;Nathalie Boudeau;Jean-Claude Gelin;Leonid Maslov
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
99.Powder Metallurgy and Spray Formed 10 V Cold Work Tool Steels, A Comparison

机译：粉末冶金和喷涂成型10％V冷作工具钢的比较
- 作者：R. A. Mesquita;C. A. Barbosa
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年
- 10V cold work tool steel;
- spray forming;
- powder metallurgy;
- wear resistance;
- toughness;
100.Porous Blanks by Hot Die Stamping

机译：热模冲压多孔毛坯
- 作者：Lyudmila Ryabicheva;Arkadi Tsyrkin
- 会议名称：《Powder Metallurgy World Congress amp; Exhibition(Euro PM2004) vol.5: Full Density and Alternative Consolidation; Tools for Improving PM; PM Applications; 20041017-21; Vienna(AT)》 | 2004年