首页>外文会议>Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers

Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers

召开年：2010
召开地：Orlando, FL(US);Orlando, FL(US)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Manufacturing and Characterization of Nano-Composite Linear Strain Sensors

机译：纳米复合线性应变传感器的制造与表征
- 作者：Brian K. Simpson;David Hill;Kyriaki Kalaitzidou
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- polydimethylsiloxane (PDMS);
- vapor-grown carbon fiber (VGCF);
- strain sensor;
- percolation threshold;
- conductivity;
- modulus;
2.BIAXIAL FORMING BEHAVIOR OF DECORATIVE FILM LAMINATES

机译：装饰性薄膜层压板的双轴成形行为
- 作者：Syed A. Ashter;M. R. Thompson;F. A. Brandys;K.E. Nielsen
- 会议名称：《》 | 2010年
- biaxial modulus;
- residual stress;
- thermoforming;
- biaxial strain;
3.APPLICATION OF TAGUCHI METHOD ON NYLON6 NANOCOMPOSITES THIN WALL IN MOLD DECORATION MOLDING

机译：TAGUCHI方法在装饰装饰模具用NYLON6纳米复合薄壁中的应用。
- 作者：Hsin-Shu Peng;Pao-Lin Su;Shia-Chung Chen
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
4.ON-LINE IN-MOLD TRANSDUCER IN INJECTION MOLDING

机译：注塑成型中的在线模内传感器
- 作者：Ke Yao;Yi Yang;Feng Zhou;Furong Gao
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- injection molding;
- in-mold sensor;
- quality sensor;
- dielectric properties;
- polymer melt;
5.MELT COMPOUNDING OF POLY(ETHYLENE TEREPHTHALATE)/CLAY NANOCOMPOSITES: COMPARISON OF DIFFERENT ORGANOCLAYS

机译：聚对苯二甲酸乙二酯/粘土纳米复合材料的熔融混合：不同有机粘土的比较
- 作者：Jorge Uribe-Calderon;Musa R. Kamal
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
6.Feasibility Study of Additive Manufacturing of Thermally Conductive PA12 Powders by Selective Mask Sintering

机译：选择性掩膜烧结增加制造导热PA12粉末的可行性研究。
- 作者：F. Kuehnlein;D. Rietzel;D. Drummer
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- additive manufacturing;
- rapid prototyping;
- selective mask sintering;
- thermal conductivity;
- PA 12 powders;
7.Preparation of Polypropylene-Organoclay Nanocomposites: Effect on Thermal,Morphological and Viscoelastic Properties

机译：聚丙烯-有机粘土纳米复合材料的制备：对热，形态和粘弹性的影响
- 作者：Mohammad Al-haj Ali;Rabeh Elleithy;Saeed AlZahrani;Achmad Chafidz
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
8.EFFECTS OF STEAM EXPLOSION CONDITIONS ON THE MECHANICAL PROPERTIES OF LDPE/COTTON BAST COMPOSITES

机译：蒸汽爆炸条件对LDPE /棉韧皮复合材料力学性能的影响
- 作者：Feng Yan-Hong;Qu Jin-Ping;Shen Han-Zhi;He He-Zhi;Liu Bin;Wang Song-Ruo
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
9.A NEW FAMILY OF STYRENIC BLOCK COPOLYMERS FOR ELASTOMERIC FILMS IN PERSONAL CARE APPLICATIONS

机译：应用于个人护理领域的弹性膜的苯乙烯嵌段共聚物的新家族
- 作者：Andre J. Uzee;Michael O. Myers;Brian Witt
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
10.Effect of Heat and Shear on the Gelatinization of Thermoplastic Starch with Various Plasticizers

机译：加热和剪切对各种增塑剂对热塑性淀粉糊化的影响
- 作者：A ta Taghizadeh;Basil D. Favis
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
11.NUMERICAL SIMULATION FOR THERMAL CONTROL SYSTEM IN VARIOTHERM MOLD DESIGN

机译：恒温模具设计中热控制系统的数值模拟
- 作者：Hung-Chou Wan;Yan-Chen Chiu;Chia-Hsiang Hsu;Rong-Yeu Chang
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
12.3D SIMULATION OF THE FLUTED MIXER ELEMENT BEHAVIOR

机译：混合器元素行为的3D模拟
- 作者：Pavel Kubik;Jiri Vlcek;Jiri Svabik;Martin Zatlouka
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- fluted mixer;
- insulation layer;
- 3D finite element method simulation;
13.DEFECTS DURING EXTRUSION PROCESSES -RECOGNIZE, ANALYZE, GRADUATE AND ERADICATE

机译：挤出过程中的缺陷-识别，分析，析出和消除
- 作者：Potente H.;Schoeppner V.;Seibel S.
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
14.A NOVEL JOINING PROCESS FOR HYBRID PLASTIC-METAL COMPONENTS

机译：混合塑料组件的新连接过程
- 作者：Dustin Flock;Edmund Haberstroh
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
15.A NEW PROCESS TO RECYLE PET BOTTLE FLAKES FOR FOOD CONTACT APPLICATIONS

机译：用于食品接触应用的回收PET瓶片的新方法
- 作者：Girish M. Bhatt
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
16.PROPYLENE BLOCK COPOLYMER AS A COMPATIBILIZER FOR POST CONSUMER HDPE/PP BLENDS

机译：丙烯嵌段共聚物作为消费后HDPE / PP共混物的相容剂
- 作者：E. McConville;J. Grabowska;G. McNally;P. Beamy;S. Cherry
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
17.TEMPERATURE EFFECTS ON SLOW CRACK GROWTH IN PIPE GRADE PE

机译：温度对管材PE慢速裂纹扩展的影响
- 作者：Zhenwen Zhou;Haiying Zhang;Alexander Chudnovsky;W. Michie;M. Demirors
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- polyethylene;
- crack growth transition temperature;
- slow crack growth;
- ramp test;
- creep;
18.The Microstructure of Micro-Injection Molded High Density Polyethylene

机译：微注射成型高密度聚乙烯的微观结构
- 作者：Jingsong Chu;Musa R. Kamal
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- micro-injection molding;
- microstructure;
- high density polyethylene;
19.INVESTIGATION ON VARIOUS VARIOTHERM PROCESSES IN INJECTION MOLDING

机译：注塑成型中各种变温过程的研究
- 作者：I-Sheng Hsieh;Cheng-Han Tsai;Chao-Tsai Huang;Chao-Chang Tang;Kin-Fu Lu
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
20.REVIEW OF PE PIPE LIFETIME PREDICTION BASED ON PENT TEST

机译：基于Pent测试的PE管道寿命预测的回顾
- 作者：Haiying Zhang;Zhenwen Zhou;Alexander Chudnovsky;Umut Cakmak
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- PE pipe;
- lifetime;
- PENT;
- SCG;
- SIF;
21.FEASIBILITY OF USING BIO-DEGRADABLE PLASTIC FOR AUTOMOTIVE APPLICATIONS IN TYPICAL AUSTRALIAN WEATHER

机译：在典型的澳大利亚天气中将生物降解塑料用于汽车的可行性
- 作者：Mohammad T.I. Mazumder
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- biodegradable plastic;
- UV radiation;
22.BIODEGRADABLE POLYURETHANE/SOY PROTEIN SHAPE-MEMORY POLYMER BLENDS PREPARED VIA ENVIRONMENTALLY-FRIENDLY AQUEOUS DISPERSIONS

机译：通过环境友好的水分散体制备的可生物降解的聚氨酯/大豆蛋白形状记忆聚合物共混物
- 作者：Samy A. Madbouly;Wenshou Wang;Joshua U. Otaigbe
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- shape-memory effect;
- polyurethane dispersion;
- soy protein;
- miscibility;
- foams;
23.THE USE OF RHEOLOGICAL AND THERMAL FRACTIONATION METHODS FOR THE ASSESSMENT OF NUCLEATING AGENT EFFICIENCY IN POLYPROPYLENE

机译：流变和热分馏方法在评估聚丙烯中核能效率方面的应用
- 作者：Saeid Kheirandisti;Markus Gahleitner;Martin Obadal;Petar Doshev;Beta Pukanszky;Alfred Menyhdrd
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
24.THE WARP AGE AND OPTICAL PROPERTY INFLUENCED BY THE PROCESS-INDUCED PROPERTY VARIATION IN MULTI-COMPONENT MOLDING

机译：多组件成型中过程诱导的属性变化对WARP年龄和光学属性的影响
- 作者：Meng-Chih Chen;Chao-Tsai Huang;Yuan-Rong Chang;Shi-Chang Tseng;Tong-Yu Wu;Chien-Jen Wang
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
25.LIFETIME PREDICTION OF PLASTIC PIPES FOR GAS DISTRIBUTION AND HOT WATER SUPPLY

机译：用于气体分配和热水供应的塑料管的寿命预测
- 作者：Hiroyuki Nishimura;Takafumi Kawaguchi
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
26.Validation of an Accelerated Fracture Mechanics Extrapolation Tool for Lifetime Prediction of PE Pressure Pipes

机译：PE压力管寿命预测的加速断裂力学外推工具的验证
- 作者：Andreas Frank;Anna M. Hartl;Gerald Pinter;Reinhold W. Lang
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- polyethylene;
- fatigue;
- pipe;
- creep crack growth;
- lifetime prediction;
27.IN-MOULD LAMINATION OF METAL SHEETS WITH INTEGRATED FORMING FOR METAL DECORATED PARTS

机译：用于金属装饰零件的一体化成型的金属板的模内层压
- 作者：Walter Michaeli;Roland Maesing
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- decoration;
- metal forming;
- cool-touch;
- in-mold lamination;
- back molding;
- warpage;
- simulation;
28.INTERNAL MIXERS - A NEW APPROACH TO COMPOUND TPE

机译：内部混合器-复合TPE的新方法
- 作者：Walter Michaeli;Hannah Koeppen
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- compounding;
- internal mixer;
- morphology;
- thermoplastic elastomers;
29.MEASUREMENTS OF BIAXIAL STRESSES DURING THE COMPRESSION OF BULK RESIN FEED

机译：散装树脂进料压缩过程中的轴向应力测量
- 作者：Stephen J. Derezinski
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
30.LOW CTE THERMOPLASTIC AND CROSSLINKED ELASTOMERS

机译：低CTE热塑性和交联弹性体
- 作者：Naveen K. Singh;Alan J. Lesser
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- double networks;
- crosslinking;
- thermoplastic;
- elastomer;
31.THE APPLICATIONS OF MULTIVARIATE STATISTICAL METHODS IN INJECTION MOLDING PROCESS MONITORING

机译：多种统计方法在注塑过程监测中的应用
- 作者：Yuan YAO;Yi YANG;Ke YAO;Furong GAO
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- injection molding;
- monitoring;
- fault diagnosis;
- multivariate;
- PCA;
32.PREDICTION OF SECONDARY FLOWS IN NON-CIRCULAR DUCTS USING THE RADIAL FUNCTIONS METHOD

机译：用径向函数方法预测非圆管中的二次流
- 作者：Ivan D. Lopez;Lori T. Holmes;Tim A. Osswald
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
33.WEATHERING PERFORMANCE OF A SCRATCH RESISTANTCOPOLYCARBONATE RESIN

机译：耐刮擦性聚碳酸酯树脂的风化性能
- 作者：Andre J.P. van Zyl;Tapan Chandra
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
34.CHARACTERIZATION OF NEW THERMOPLASTICS FOR ADDITIVE MANUFACTURING BY SELECTIVE LASER SINTERING

机译：选择性激光烧结制备新型热塑性材料的表征。
- 作者：D. Rietzel;F. Kuehnlein;D. Drummer
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- selective laser sintering;
- additive manufacturing;
- isothermal crystallization;
- POM;
- PP;
- PA2200;
- PE;
35.INNER MELT PEAK PACK TEMPERATURE END PRESSURE SENSOR

机译：内熔峰包温度末端压力传感器
- 作者：Frederick Buja
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
36.Initial Studies on Double Network Glasses

机译：双层眼镜的初步研究
- 作者：Andrew T. Detwiler;Alan J. Lesser
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- network;
- glass;
- mechanical properties;
- backbone stiffhess,epoxy;
37.CONJUGATED POLYMER PHOTOVOLTAIC SOLAR CELLS - MANUFACTURING AND INCREASING PERFORMANCE

机译：共轭聚合物光伏太阳能电池-制造和提高性能
- 作者：SeanPetzola;Chuan Wang;Abdullah Khazaal;Tim Osswald
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
38.Enhancing Properties of PP-Impact Copolymers by Chemical Modification

机译：通过化学改性增强PP-抗冲击共聚物的性能
- 作者：Peter Neuteboom
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
39.MECHANICAL PROPERTY RETENTION OF HIGH HEAT POLYCARBONATES UNDER LONG TERM AGING AT ELEVATED TEMPERATURES

机译：高温下长期高温下高温聚酯的机械性能保留
- 作者：Gaurav Mediratta;Amitha Gowda;K S Anil;Theo Hoeks;Srinivas Siripurapu
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
40.SONOPLAST. 'NEW PROCESS AND MACHINERY FOR MICROPARTS MOLDING BASED ON ULTRASOUND EXCITATION'

机译：SONOPLAST。 “基于超声激发的微颗粒成型新工艺和机械”
- 作者：Enrique Colavizza;Francesco Puliga;Encarna Escudero
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- microinjection by ultrasound;
- ultrasound (US);
- mold;
- plastification;
41.Transient Rheology of a Polypropylene Melt Reinforced with Long Glass Fibers

机译：长玻璃纤维增强聚丙烯熔体的瞬变流变学
- 作者：Ortman. K.C.;Neeraj Agarwal;D.G. Baird;P. Wapperom;Jeffrey Giacomin
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- long glass fiber rheology, long glass fiber orientation, sliding plate rheometer, flexible fiber, composite, glass reinforced thermoplastic;
42.THEORETICAL AND EXPERIMENTAL INVESTIGATION OF INTERFACIAL INSTABILITIES IN COEXTRUSION FEED-BLOCK DIES

机译：共挤进给模头中界面不稳定性的理论和实验研究
- 作者：M. Zatloukal;A. Xue;M. Amon
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
43.A PLASTICS MANUFACTURING SYSTEMS EDUCATION

机译：塑料制造系统教育
- 作者：D.O. Kazmer;C.D. Ap;ML. Bernasconi;D. Brooks;D.D. Casiello;A. Fakiri;A.D. Frigon;M.D. Furbush;M.D. Guimond;CD. Hauver;H.S. Jafferji;S. Kelly;D. Kim;A. Moussaoui;P.W. Muiznieks;V. Nhem;J.A. Piader;D.W. Russell;D.B. Sheehan;H. Valdes;B.R. Weidknecht
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
44.RECENT ADVANCES IN JOINING OF POLYMER AND POLYMER-METAL HYBRID STRUCTURES BY FRICTION-BASED SPOT WELDING TECHNIQUES

机译：基于摩擦的点焊技术在聚合物和聚合物-金属杂化结构连接中的最新进展
- 作者：Sergio T. Amancio Filho;PedroH. F. de Oliveira;Caio C. Bueno;Alexander Hoppe;Jorge F.dos Santos;Elias Hage Jr.
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
45.NANOSTRUCTURE CONTROL FOR TUNING THE GLASS TRANSITION TEMPERATURE OF POLYSTYRENE BY 100 K:BLENDS AND MULTILAYER FILMS

机译：纳米结构控制，用于调节聚苯乙烯的玻璃化转变温度：100 K：混合和多层膜
- 作者：Soyoung Kim;Connie B. Roth;Rodney D. Priestley;Robert W. Sandoval;Michelle M. Mok;John M. Torkelson
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
46.ENHANCING BIOPOLYMERS WITH HIGH PERFORMANCE TALC PRODUCTS

机译：用高性能滑石产品增强生物聚合物
- 作者：Saied H. Kochesfahani;Caroline Abler;Jerome Crepin-Leblond;Frederic Jouffret
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
47.IMPROVING THE FEEDING ZONE OF SINGLE SCREW EXTRUDERS AT HIGH ROTATION SPEED BY USING THE DISCRETE ELEMENT METHOD

机译：离散元法改进高速旋转单螺杆挤出机的送料区
- 作者：V. Schoeppner;R. Weddige
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
- extrusion;
- solid conveying simulation;
48.MODELING OF FLOW AND HEAT TRANSFER WITHIN HOT RUNNER SYSTEMS USING THE RADIAL FUNCTION METHOD (RFM)

机译：使用径向函数法（RFM）对热流道系统内的流动和传热进行建模
- 作者：Ivan D. Lopez;Alan Bednar;Tim A. Osswald
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
49.NAVIGATING SYSTEM FOR HOT-RUNNER DESIGN WITH KNOWLEDGE MANAGEMENT

机译：具有知识管理的热流道设计导航系统
- 作者：Wen-Ren Jong;Ping-Huei Lee;Tai-Chih Li;Yu-Hung Ting;Jerry Hsu
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
50.Tracking Phase Separation Kinetics of Block Copolymer Solutions Using Dynamic Mechanical Measurements

机译：使用动态力学测量跟踪嵌段共聚物溶液的相分离动力学
- 作者：Michael Heinzer;Donald G. Baird
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
51.Virtual Simulation of Top Load Performance of Plastic Bottles

机译：塑料瓶最高载荷性能的虚拟模拟
- 作者：Sumit Mukherjee
- 会议名称：《Annual technical conference of the Society of Plastics Engineers;Technical conference of the Society of Plastics Engineers》 | 2010年
52.A Study of the Freezing Phenomena in PVC and CPVC Pipe Systems

机译：PVC和CPVC管道系统中的冻结现象研究
- 作者：Javier Cruz;Bruce Davis;Paul Gramann;Antoine Rios
- 会议名称：《》 | 2010年